INSTALLATION and OPERATING INSTRUCTIONS
Contents
1. the end of the aero 18 9162 Solenoid 3 4 1x cabinet and the burner s grey apparatus socket 19 8289 Compressed air hose PAN 6x1 SI 0 12m B Installing the hose 20 4155 Angled plug connector 1 8 6 2x Connect the supplied 8 mm Teflon hose between the quick connector 12 in the 21 8326 DIN rail 2 m 0 025 x end of the aero cabinet and the quick connector on the burner s connector panel 1127 Apparatus charge point 2 1x The compressor will now start automatically during the burner s extinguishing and 1447 Cabinet Aero cover 1x the time relay applies current to the solenoid after a set time The burner s internal 8163 Screw 65 M5 6 untreated 4 x pipes are cleaned of ash and fine residue 8184 Screw M6S M6 x 20 FZB 4 x 8325 Apparatus foot rubber 4 x ARITERM SWEDEN AB Installation amp Operating instructions 2011 03 11 Page 2 4 1637 Aero kit for 22 ARITERM ARITERM SWEDEN AB Installation amp Operating instructions 2011 03 11 Page 3 4 If these instructions are not followed during installation operation and maintenance the obligations of Ariterm Sweden AB under the warranty regulations are no longer binding Ariterm reserve the right to alter any details and specifications without prior notice ARITERM Ariterm Sweden Flottiljvagen 15 SE 392 41 Kalmar www ariterm se2. 27 M INSTALLATION and ITE R OPERATING For a sustainable future 1637 Aero kit for PX22 as 1637 Aero kit for PX22 ARITERM Table of Contents Parts eua e NER 2 1637 Aero kit for PX22 2 1 4278 Angle connector 1 8 x 8 mm 1 ACA 2 2 8359 Locking pin D 11 2 1x 3 1434 Cabinet Aero bottom 1x B Description 4 1446 Wiring Aero kit 1x Aero is a turnkey unit for automatic cleaning of pellet burner PX22 2 deo e IX Aero comes with the necessary parts required for your PX22 burner to be 6 4136 vessel compressor Uno 1 practically maintenance free It be connected to PX22 burners that 4159 Vibration damper 20 x 30 x 6 8 prepared for Aero 8 4252 Time relay for Uno 1 9 4279 Angle connector 1 4 x 8 mm 1 Installation 10 4281 Bush 1 2 ext x 1 4 int 1x 11 4282 Collar 20 15 1 NOTE Aero does not need to be opened Everything 15 pre connected upon 12 4305 Bulkhead 8 mm 1 delivery from the factory 13 8116 Screw MRX M6 x 10 FZB 12x ACTO 14 8149 Washer BRB 6 7 14 x 1 5 black 10 x Hang Aero on a wall using the keyholes on the back or place it on the boiler 15 8166 Screw K6S M4 x 8 black 2 16 8324 Apparatus socket f 3 mm sheet metal 1 x M Electrical connection burner 17 8338 Compressed air hose PTFE 8x1 3 3m Connect the supplied cable to the apparatus socket 16
Download Pdf Manuals
Related Search