Operating instructions DALI EASY IR
Contents
1. Operating Instructions Infra red receiver DALI EASY IR Installation Function The IR receiver converts the digital coded infra red signals of the remote controls type DALI EASY RMC into corresponding telegrams and transmits them to the connected DALI EASY control units Design and dimensions 39 Operation and mounting The infra red receiver can be mounted in a luminaire a ceiling panel or with an appropriate cover in a cavity socket Make sure that the remote control can point at the infra red sensor at as steep an angle as possible Bear in mind that the maximum range of the remote control is around 10 15 metres The connection cable of the IR receiver can be extended with the Y connector type Y Connector Multi 3 max cable length see technical data Note Make sure that there is a line of sight between the IR receiver and the remote control Up to four IR receivers may be connected To ensure that the remote control function operates properly the IR receiver must not be exposed to direct light Wherever possible mount the IR receiver in a shaded spot OSRAM Operating Instructions Infra red receiver DALI EASY IR page 3 Appendix Technical data Designation DALI EASY IR Connections fixed cable with RJ11 plug length approx 2m max 100m connection cable in total including all connections between control units do not connection cable together with power cables or lamp wires Operating t2. OSRAM Operating instructions Il 2004 DALI EASY IR Version 1 0 OSRAM GmbH www osram com Costumer Service Center CSC www osram de Steinerne Furt 6286167 Augsburg Germany Tel 449 1803 677 200 charges apply Fax 49 1803 677 202 General Contents General Safety information l Function Installation Design and dimensions Operation and mounting Technical data Aa DN Safety information The following information is provided for your safety Please read these operating instructions carefully before installing and using the infra red receiver DALI EASY IR This is the only way to ensure that you use the equipment safely and correctly Keep these operating instructions in a safe place for future reference You should make sure that everyone who uses the DALI EASY IR has read these operating instructions DALI EASY is intended exclusively for operating with DALI EASY control units see technical data DALI EASY may only be installed by qualified personnel who have been appropriately trained and who have the relevant authority The installation personnel must be familiar with the operating instructions Power must be switched off before any work is undertaken on the unit The relevant safety and accident prevention regulations must be observed If the Infra red receiver is wired with external voltage particularly with a mains voltage of 230 V the unit may be destroyed page 2 OSRAM
3. emperature OC 50 Protection type IP20 CE requirements EMC according EN 61547 EN 61347 11 Dimensons 35 x 21 x 16 mm Ix wx h Accessories not included TE Y CONNECTOR MULTI 3 Y connector for extension of the IR receiver cable C The CE symbol signifies compliance with the relevant EU Directives nade 4 OSRAM Oneratina Instructions Infra red receiver DAI I FASY IR
Download Pdf Manuals
Related Search