Installation Manual CDM-ISO-MAT (DRY)
Contents
1. N V EU 01 je Ia Installation Manual CDM ISO MAT DRY Resilient Surface Mat for Floors CDM ISO FLOOR CDM T 32 2 6877907 Reutenbeek 9 11 BE 3090 Overijse Belgium F 32 2 6873552 E general cdm be www cdm be Is H noise amp vibration control A J Ins Contents A Lateral Isolation B CDM ISO MAT C Wood Layers D Finishing Figures 1 Installation of CDM ISO MAT 2 Finishing Page 1 of 3 CDM ISO FLOOR CDM T 32 2 6877907 Reutenbeek 9 11 CDM F 32 2 6873552 BE 3090 Overijse E general cdm be Belgium www cdm be noise amp vibration control A J Ins D STEPS TO FOLLOW A Lateral Isolation Ensure that the structural floor is completely dry free of obstacles discontinuities dust etc before installing the isolation layer Along the perimeter of the slab install lateral isolation to ensure a complete decoupling with respect to surrounding walls and structure In this case the same mat material can be used however it is best not to use with a wavy layout risk for easy penetration of water and dust otherwise Islands like columns building services etc must be surrounded as well by this lateral isolation to avoid acoustical bridging B CDM ISO MAT Install CDM ISO MAT by rolling out the mats side by side openings should be limited to 0 04 1 mm onto the surface to be treated In the case of a wavy mat the wavy s2. ide must always be pointing downwards see figure on the left in order to profit from the interesting shape factor CDM ISO PERIMETER STRIP CDM ISO MAT Figure 1 Installation of CDM ISO MAT Page 2 of 3 CDM ISO FLOOR CDM T 32 2 6877907 Reutenbeek 9 11 CDM F 32 2 6873552 BE 3090 Overijse E general cdm be Belgium www cdm be noise amp vibration control A J Ins D C Wood Layers In the case of a dry floor setup place at least two layers of wood OSB MDF plywood over the installed CDM ISO MAT of which the top layer covers the joints of the one just below D Finishing Install finishing flexible floor covering vinyl carpet etc and plinth use a flexible joint between the fixed plinth and the floating floor system The floating floor should have no rigid contact with the surrounding structure CDM ISO PERIMETER STRIP Finishing Wood Layer Wood Layer CDM ISO MAT Figure 2 Finishing Page 3 of 3 CDM ISO FLOOR CDM T 32 2 6877907 Reutenbeek 9 11 D F 32 2 6873552 Ia E general cdm be le BE 3090 Overijse Belgium a p www cdm be noise amp vibration control
Download Pdf Manuals
Related Search