User Guide - Pen camcorder
Contents
1. records video or audio the status light immediately turns back to yellow illuminated connect it to your computer and check whether there is enough memory left If this is not the case you should fist save your data and then delete it from the device Should the device system crash press the lower of the two holes at the back reset with a thin piece of wood The device restarts If that does not work wait until the battery is dead Recharge the device until the battery is completely full While recording videos move the device slowly and not abruptly because this could lead to image fragments and audio noise To view your videos easily use Windows Explorer or search My Computer using the correct removable disk drive To conserve the battery the device turns off automatically after about seconds when not use Please note that the video records quality is very dependent on the brightness In dark rooms the quality of the images will fade Your operating system should be up to date so that a well functioning USB connection can be guaranteed If you can only hear an audio but do not get picture It is probably because of the Windows Media Player We recommend the installation of the VLC player This is free player can be downloaded on the internet Video Audio records can only be deleted on the computer but not directly from device With the reset button the records can not be deleted directly from the device P2. N OFF button during that procedure The time to boot up the system depends on the storage size of the device The more storage the device has the more time the boot up procedure will take In order to ensure good sound effect of recording do not block the microphone hole OPERATING In order to disconnect the device please click SAFELY REMOVE HARDWARE on the right bottom corner of the task bar Then click USB mass storage device Unplug the USB The disconnection completes Page 7 According to the computer or system configuration there will be slightly different time of identification Please be patient and don t press the ON OFF button during this period It may cause a bad impact of computer hardware If the computer does not identify the device please disconnect and reconnect the device If the computer is unable to identify the hardware yet make sure your operating system driver and USB cable are all in working condition Please make sure to disconnect the device in accordance with the normal process to avoid a possible damage for computer and recorder 10 Time setting Plug the device to the computer and double click the Date Time EN exe and then click setting Remove it from your computer and press the reset button to complete the time setting Tesa ienee Tete ri Pet eb oe Safety Instructions Page 11 Cleaning Do not use it under the environment with high dust density to avoid the contami
3. Page 1 User Guide Pen camcorder Instruction Manual Operating Video Recording Operating Mode Switches Operating Photograph Operating Connection to PC Operating Time setting Operating Battery charging amp Reset Fact Sheet of Campen Safety Instructions Safety Instructions II Specification OPERATING 5 How to take photo Please be sure the Mode Switch is on Photograph mode Press the On Off button about 2 seconds and the status light will be in yellow blinking standby Press the ON OFF button again for taking photo and the status light will blink a second in blue After completion the photograph the status light will turn back to yellow blinking standby Please Notice A If the device is not used for a short period about 30 seconds it will turn off automatically in order to save power B Before the battery runs out of power the device will automatically save the current file and turn off C The system will create a new file after stopping recording D It takes a few seconds to save the file do not operate the device until the light turns yellow It can lead to the corrupt files if you do E Make sure there is adequate light in the surrounding and the camera is not blocked by other items Keep the camera upright and stable And the object should be more than 50cm from the camera Page 5 Fact Sheet of Campen Please read the instructions carefully If the device no longer takes
4. age 9 INTRODUCTION This ball pointer pen is a high definition video recorder with built in memory with simple operation elegant design small size it is easy to carry It is an essential utility in business education security media justice health care living and other fields Pen assembly Status Light Yellow and Blue Reset Mode Switch Video Audio USB On Off Button Camera Microphone under clip Battery Charging Light Red ONDAN OPERATING 6 Turn off the Device It will turn off automatically within 30 seconds in standby mode without any operating The system will automatically save the file while turning off Page 6 7 Connecting to Your Computer You can connect the device with your computer no matter if it is on or off Simply screw up the pen and stick the USB of the pen into an external USB volume You can access the USB volume directory USB volume VIDEO Audio files are saved under the USB volume directory USB volume AUDIO 8 Write Twist the pen s head and the ball pen appears Now you can write Twist it into the opposite direction in order to close it ii i F Pull out the writing pen part to change the refill Screw the old refill out Put the new refill in and screw it clockwise Push writing pen part back 9 Replace the Pen refill Page 10 Safety Instructions Application Please strictly abide relevant regulations and laws This prod
5. he USB connector When the battery is fully recharged the red light will be off Page 8 Please Notice The recorder has a built in high capacity lithium polymer battery It can be used and charged at any time But for the first five charging times please charge battery to the maximum after the battery runs out This will activate the batteries maximum capacity and maintain in the standard working time 12 Reset If the recorder stops responding please use the suitable non metallic tool to push the RESET button Please Notice If the device stops working due to improper operation or other unknown reason please reset it slightly Specification Page 12 Video compression AVI video format 1280 x 720 Photograph 1600 x 1200 JPG DSC 2 0M Len size 2mm Video recording Yes 1280x720 AVI Photograph Yes 1600 x 1200 JPG Continuing video recording time about 1 hour with full battery charging Battery type 220mAh polymer Lithium ion Charging volt DC 5V Operation system Window 7 VISTA xp me 2000 98SE MAC OSX LINUX for Windows98 you must install the driver manually a Remarks KE If your current Media Player is not working properly just double clip Codec Pack exe and it will automatically update your code version RoHS Made in FC CE Compliant Taiwan Clit Peck ace
6. nation of camera lens or other components It may affect the working of camera The camera lens can be cleaned gently by paper or cloth which is used to clean glasses Other Matters The product belongs to sophisticated electronics products Please make sure that is not damaged by strong impact and strong vibration Do not use it in the place with strong magnetic or strong electric power Batteries In connection with the sales of batteries rechargeable batteries or to the supply of equipment the batteries included the seller is obliged to advise them of the following You have to return used batteries rechargeable batteries required by law as the end user You can return batteries after use the seller or the designated collection points eg in municipal collection sites free of charge OPERATING 4 Switching Modes Video Photograph With the Mode Switch you can select between Video and Photograph In the Video mode the status light will be yellow illuminated standby In the Photograph mode the status light twinkles in yellow standby Page 4 Mode Switch side switch Please use pen lead to push the slide switch to choice the function you need Video mode Photograph Battery charging LED in RED Warning Do not switch mode while recording OPERATING 11 Battery Charging Connect to pen with the computer USB port or the charger During the charging the red light illuminates closing to t
7. uct should not be used for any illegal purposes The user is fully responsible for its using purpose Battery If do not use this recording function after long time please charged it once per month at least to keep the good condition of battery File Security This product is not a professional storage device It does not guarantee the integrity and security saved files Please back up your important documents on the computer or other storage device timely Operating humidity 20 80 This product does not have the waterproof function So it cannot work under the humid environment Shooting brightness Do not expose the camera directly to strong light such as the sun light to avoid damage to optical devices OPERATING 1 Power On Please be sure the Mode Switch is in Video mode In order to turn on the camera press the ON OFF button for 2 seconds Wait until the status light glowing constantly yellow The camera is now ready to use standby Page 3 2 Start Video Recording Press the ON OFF button again The status light blinks in blue and it is video recording 3 Stop Recording Press the ON OFF button again to stop recording Now the device will save the footage The status light will turn yellow illuminated again standby Press and hold the ON OFF button about 5 seconds to power off Please notice Once activated the device will need a short period of time to boot up Do not press the O
Download Pdf Manuals
Related Search