Operating Instructions
Contents
1. 19 2 5 2 Set the Date and Time 19 2 5 3 Set the Satellite Synchronization 20 Using the Car Recorder sss 21 3 1 Recording VIOGOS assis idit web tU biduo ss idu VENE pA E UNE eds 21 3 1 1 Record videos while driving 21 3 1 2 Driver Fatigue Alert 21 O N O C 318 Record all other types of videos 22 3 1 4 Emergency Recording 22 3 1 5 The Recording Screen 23 3 1 6 Taking Photographs aa 24 Siler 4 GRID FUNCTION CHART in the LCD screen T 25 3 2 Playback Videos and Photos 26 3 2 1 Playing VICGQOS sanita m adatu pad 27 3 2 2 Viewing PROTOS i bern dr oo teas 27 3 2 3 The Playback Screen 28 3 2 4 Deleung 199 eiecti een mitte titus 29 Adjusting the Settings 30 4 1 EU SING ne IM Gi eds dosectetur totu beietetecitefuttn dures 30 zT MEM MUI eR 31 Detalh ON c etter enr Manut automate a das 33 Installing the Software 35 SUP ftG lz ueuewun REN 36 SPecificatiOns sausais n smu ae 37 Trouble Shooting 39 This pictograph intends to alert you to the presence of2. Safety Information N Warning Observe the following warnings when installing this unit m Install the product so that it does not hinder the view of the vehicle m Never install the unit within the range of air bag movement or in a position that obstructs activation of the of air bag Please also verify warnings and precautions regarding the vehicle s air bag m Make sure the wiring does not hinder passengers from getting in out of the vehicle Make sure the wiring is properly fixed to ensure safe driving N This pictograph intends to alert you to the presence of important operating instructions and installation Caution instructions Failure to heed the instructions may result in injury or material damage VA Caution Observe the following cautions when using this unit m This unit i dessigned for use exclusively in vehicles m Never store the unit in a dusty or dirty place or near the vehicle s air con heater Long term exposure to said environment may damage the unit m Never install store the unit in a high temperature environment as it could result in damage Safety Information AN Caution Observe the following cautions when using this unit m When disposing of the unit follow statutory regulations to recycle the built in lithium battery so as to prevent environmental pollution m For some vehicles the unit continues recording after the engine has being shut off In such a case the following measures shall b
3. Pressthe A W button to select the desired setting and press the OK button to confirm the setting 5 Pressthe 2 button to exit the menu 30 4 2 Menu Tree Refer to the below table for details on menu items and available menu options Select the file category Video Emergency ple k s ddr that you want to view Picture Default Video Satellite Status Displays the current state of the satellite reception Automatically synchronize with the local satellite time When this feature is enabled the system will On Off Default On use the satellite time and you cannot manually change the time Press 4 amp W button to adjust the value press Date Time Set the date and time the OK button to switch the field and confirm Default On Time Stamp Eiss kaa Megateg On Off Default On stamp 1080p 1920x1080 Resolution Set the video resolution 720p 1280x720 Default 1080p Press 4 amp W button to set the exposure level Set the exposure ee EV Solripeheation You may customize it P l between 1 0 1 0 Default 0 0 Driving Priority Calculates exposure based on the entire image Driving Priority Scenery area but provides greater Priority Default Driving exposure to the center of Priority a subject Scenery Priority Satellite Synchronization Smart Scene Mode 31 Calculates exposure based on the entire image area When enabled the Driver Fatigue camcorder sounds a
4. car camcorder in your PC Laptop optical drive 2 Ifthe CD does not execute automatically please use Windows File Manager to execute the Install CD exe file in the CD The following screen will be shown up QuickTime PDF Reader User Manual SuperCar Exit 3 Press the Menu item to start the installation process according to the instructions on screen 35 6 SuperCar 9 rernm Current Duration Total Duration Signal Noise Ratio SNR Note 1 To display the route on Google Maps please make sure the internet is connected before starting the video playback 2 Video files MOV TS and GPS G Sensor files NMEA must be stored in the same folder before starting the playback 3 The included SuperCar software is only for Windows computers 36 7 Specifications m mm The device 5V gt 1A Car Charger 2 24V Recording with battery charging 4 4 W Consumption Preview with battery charging 3 7W Storage media Supports Micro SDHC up to 32GB class 6 or above LCD display 2 4 LCD color TFT 112K pixels L Wide Angle Fixed Focus lens Ms F2 4 f 3 0mm Resolution Full HD 1920 x 1080 30fps HD 1280 x 720 30fps Format MOV Still image Resolution 3M 2304 x 1536 Snapshot Format DCF JPEG Exif 2 2 Electronic shutter tl Auto 1 2 1 2000 sec 3 Axis G Force sensor 37 Movie Clip Description Interface Mini USB Mini C Type HDMI Built in 470mAH Li polymer rechargeab
5. products and batteries please contact your local municipality your waste disposal service or the point of sale where you purchased the items Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation For business users in the European Union If you wish to discard electrical and electronic equipment please contact your dealer or supplier for further information Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union If you wish to discard these items please contact your local authorities or dealer and ask for the correct method of disposal CE Regulatory Notice Herewith confirm to comply with the requirements set out in the Council Directives on the Approximation of the Laws of the Member States relating Electromagnetic Compatibility of Radio and Telecom device 1995 5 EC the Low Voltage Directive 2006 95 EC the Restriction of The Use of Certain Hazardous Substances in Electrical And Electronic Equipment Directive 2002 95 EC Turkish EEE Directive the Commission Regulation EC No 1275 2008 implementing Directive 2005 32 EC of the European Parliament and of the Council with regard to eco design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment and the Directive 2009 125 EC of the European parliament and of the council establishing a f
6. receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment WEEE Notice Information for Users on Collection and Disposal of Old Equipment and Used Batteries These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste For proper treatment recovery and recycling of old products and used batteries please take them to applicable collection points in accordance with your national legislation and the Directives 2002 96 EC and 2006 66 EC D By disposing of these products and batteries correctly Ww you will help to save valuable resources and prevent any e 2 potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling For more information about collection and recycling of old
7. 13 2 Getting Started 2 1 Inserting the Memory Card Insert the memory card with the gold contacts facing the back of the camcorder Push the memory card until it clicks into place Use class 6 or above the micro SD cards for this camcorder It is recommended to format the micro SD cards before the initial use To remove the memory card Push to eject the memory card out of the slot Note 1 Do not remove or insert the memory card when the device is powered on This may damage the memory card 2 Please use a 8GB Class 6 or above Micro SD card Support to 32GB as the maximum 3 Please format the micro SD cards before the initial use 14 2 2 Installing in Vehicles 2 2 1 Mount to Windshield 1 Attach the bracket to the device Slide it into the bracket holder until you hear a click 2 With the suction cup laying flat position the suction cup on the windshield 3 Hold thebase firmly on the windshield and press down the clamp to mount the car holder to the windshield Make sure the base is securely locked in place I5 2 2 2 Adjust the device position 1 Loose the knob to swivel the device vertically 2 Loose the knob to swivel the device horizontally up to 360 3 Then tighten the knob to make sure the device is securely locked in place 16 2 3 Connecting to Power Use only the exclusive car adapter to power up the device and charge the built in battery 1 Connect one end
8. Panasonic Driving Recorder Model CY VRP112T1 T2 T3 TA T5 Operating Instructions Please read this instructions carefully before using this product and keep this manual for future reference 24240481301 A PTW0813 0 Printed in China Contents Safety Information 3 FGlG sl t li iits s us was ua SENEC EON SENE T CNN ede cec ato 8 WEEE NOCO ota aidinig uicit nc 9 GE Regulatory Noll G8 eot ead cae wl eels 10 Notes on Installation zoe ou cda dua iu eo ves o vie vnda duod dva eoa 10 G21 019 qm TUR 11 Introduction cLeeeee eee ceeeeee eene nennen 12 1 1 l Gglill G5 stis ente DN S UN ADI ALD CU SEDIS GE MEO CUEDUUEC 12 1 2 Package Contents ccccccccccccccccccceceeceeeeeeeeeeeeseeeeess 12 1 9 PRODUCE OVEIWICW Sod coe ea epi sek aes ananass 12 Getting Started direi Diet ae re ri o exeo asse 14 2 1 Inserting the Memory Card sss 14 2 2 Installing in Vehicles usted muc Rei Dun dan 15 2 2 1 Mount to Windshield 15 2 2 2 Adjust the device position 16 2 3 Gonnecting to POWE 5E 17 2 4 Powering the Camcorder On Off 18 2 4 1 Auto Power On Off eeeeesessssssss 18 2 4 2 Manual Power On Off esses 18 2 5 Initial SettingS 0c0 cccceeeeseneeesescsccsseecceeeeess 18 2 5 1 Set Automatic Recording
9. Press A V buttons to select the correct time zone for your country and press OK Note Satellite time is synchronized with time zones Different countries may use different time zones When satellite synchronization is enabled it is necessary to set a time zone to be able to use this function please follow the instructions below make sure you set the correct time zone Country Time Zone USA New York UTC 5 Brazil UTC 4 Switzerland South Africa UTC 2 Ukraine UTC 2 Russia European Area UTC 4 China Taiwan Hong Kong UTC 8 Korea Japan UTC 9 If none of the above areas fits your country visit the following website to find out the correct time zone for your location http en wikipedia org wiki Time Zone 20 3 Using the Car Recorder 3 1 Recording Videos 3 1 1 Record videos while driving When the vehicle engine starts up and the Automatic Record function is enabled the camcorder automatically turns on and starts recording Recording will automatically stop when the engine is switched off Or press the W button to stop recording manually Note On some cars the recording will continue when the engine is switched off If this happens do one of the following Manually turn off the cigarette lighter Remove the car adapter from the cigarette lighter 3 1 2 Driver Fatigue Alert 1 Press the lt button to enter the OSD menu 2 Press the A W button to select Driver Fatigue Alert and press the OK butto
10. ass as that could damage the light colored film Make sure the unit is installed at a location that is free from any influence of thermal film and away from any device that may generate electronic interference Precautions when using a Micro SD Card m Never remove the SD card when the unit is in the process of shutting down or operating Failure to comply could corrupt the files or damage the unit m AClass 6 Micro SD card with 8GB capacity or more is recommended Max support up to 32GB m Before using this unit format the Micro SD Card by this unit FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and
11. cally after you turn on the power do the following Automatic Record 1 Press the button to enter the OSD menu 2 Pressthe A W button to select Automatic Record and press the OK button FU 3 Pressthe A W button to select On and press the OK button 4 Press the gt button to exit the menu 2 5 2 Set the Date and Time To set the correct date and time do the following 1 Press the gt button to enter the OSD menu 2 Pressthe A W button to select Date Time and press the OK button 3 Press the A V button to adjust the value and press the OK button to move to another field Date Time 4 Repeat step 3 until the date and time setting is complete Note 1 When the battery is drained dry and the satellite synchronization is off the user must reset the date time before the function automatic record is started If the user doesn t reset the date time the device will give you alert you can see 2 the as attached after one minute and the automatic record will be started 2 But if the sattlelite is synchronized the device can do automatic record immediately 19 2 5 3 Set the Satellite Synchronization To set the proper satellite time zone satellite synchronization follow the steps below Press 2 into MENU function 2 Press amp W to select SATELLITE SYNCHRONIZATION and press OK into the function 3 Press A W toselect ON gt then press OK to turn on the function 4
12. e taken Manually shut off the cigarette lighter or remove the vehicle power connector from the cigarette lighter m Always keep the lens clean to ensure clear images of driving m Inthe event the ambient temperature reaches 45 C or higher the vehicle power connection will still supply power to the unit but the lithium polymer battery will not be recharged This is a typical feature of lithium batteries and is not a malfunction The unit may be affected by RF interference from mobile phones If the interference is significant use mobile phone as far away from the unit as possible Safety Information N Caution Observe the following cautions when installing this unit m It is recommended that the unit should be installation by a professional The installation requires specialty and technical experience to ensure safety entrust the dealer to carry out the installation m Make sure no wires are damaged Avoid damaging any wires while making the connection by keeping away from screws on the chassis or moving parts of seats Never twist the wires or position them near a heat source m Make sure the unit is installed correctly Avoid installing the unit at a location subject to vigorous vibrations The ideal installation location is near the back mirror where an optimal view can be obtained Make sure the lens is within range of the windshield wiper so that a clear view is ensured DO NOT install the unit on tinted window gl
13. gency recording file is created as a new file which will be protected to avoid being overwritten by normal cycling recording A 8 GB or above memory card can save up to 10 emergency video files The alert message of Emergency files are ful will pop up on the screen when the emergency recording files are full and the oldest emergency file will be automatically deleted when a new emergency recording file is created 3 Emergency Recording can happen only in the normal recording status 22 3 1 5 The Recording Screen mo tem Deseription Indicates the recording duration Indicates sound will not be recorded with the 2 Voice Record video Enter the OSD menu to enable Voice Record There are two options for the Smart Scene Mode 1 Drive Priority 2 Scenery Priority S See section 4 2 Menu Tree for more details Date and time Indicates the current recording date and time You will see the 4 GRID FUNCTION CHART in the LCD screen after you push button Add speed Press the amp button to add a speed cam cam al point 7 Resolution 1080P 1920x1080 720P 1280x720 8 GPSicon When a GPS fix is established the icon Se 23 Smart Scene Mode Guide icon Menu will show on the top right corner of the screen Battery Indicates the remaining battery power 10 Prompt eset Prompt NOT reset of date time of date time 11 Guide icon Press the W button to stop the recording St
14. he screen There is no recording function if the device attach HDMI cable If the device attach HDMI and then link to TV the TV screen will show the Preview tatus but the device screen show the red frame only 3 2 1 Playing Videos To play videos do the following 1 If recording is in progress press the W button to stop recording 2 Press the lt gt button to enter the OSD menu 3 Pressthe A W button to select File Playback and press the OK button 4 Pressthe A W button to select Video or Emergency and press the OK button 5 Pressthe A W button to browse for the desired video file and press the OK button to play the video Video 01 06 4s 6 Pressthe OK button to pause aoi 12 00 the playback Press it again to cae p resume Make TEM S E Kus ram BY 3 2 2 Viewing Photos ee eee To view photos do the following 1 If recording is in progress press the W button to stop recording Press the lt button to enter the OSD menu Press the A W button to select File Playback and press the OK button Press the A W button to select Picture and press the OK button Press the A W button to browse for the desired photo file and press the OK button to view the file in full screen 27 3 2 3 The Playback Screen Video Playback Screen Photo Playback Screen t TII TA I rn ni i P R77 mem Deepton ooo Date and time Indicates the recorded date and time Guide ic
15. important operating instructions and installation Warning instructions Failure to heed the instructions may result in severe injury or death N Warning Observe the following warnings when operating this unit m Driver shall not watch the screen of the recorder or operate the device while driving Watching the screen or operating the unit prevents distracts from focusing on road safety and could result in a traffic accident Park the vehicle in a safe location before operating the device m Never power the unit via an extension cord directly connected to the battery as to do so runs the risk of a short circuit and burnt PCB Please use the cigarette lighter socket as a power connection point m Make sure a correct power supply is used This unit is suitable for a vehicle equipped with a negative ground 12V 24V battery DO NOT use on any other battery system m Never dismantle or modify the unit Never dismantle the unit or attempt to modify or repair it on your own to do so could damage the unit or result in electrocution If the product requires servicing please consult your dealer or our service station m Donotuse this unit when it is out of order If the unit is out of order no power no sound etc or operates abnormally ingression of foreign objects soaked by rain or emits smoke or an odor immediately switch off the unit and disconnect the power supply then consult the dealer or service station for assistance
16. le This battery Batter d is NOT replaceable Operating Temperature I Operating Ld Humidity 20 70 RH Storage cue Temperature add s Dimensions 63 x 70 x 28 7 mm Weight Approx 94g 3 30Z 38 Trouble Shooting Problem Function key can not work after the screen become blue color or after formatting the card or the screen show on the process Solution reset the device via press and hold the power key for over 4 seconds Problem why the device start Emergency Recording just due to slight vibration in the car Solution Please adjust the function of COLLISION DETECTION to LOW SENSITIVITY If you adjust to OFF then the device will NOT start to have EMERGENCY RECORDING when you happen to the car accident Problem Why the recording file is error or damage File can not playback Solution Please be sure the memory card speed is over Class 6 Also please format the memory card before you start to use it Problem The voice can not support after the device link with TV via HDMI Solution The device use the format of H 264 ADPCM not AAC The voice can not support if the TV support AAC format Problem The TV screen will have oil slick or unclear status Solution Please be sure the windshield camcorder len is clean before you attach the device on the windshield 39 40 Problem Why the sound of recording file can not heard when using other playback software Solution Please u
17. ls undergrounds or forests GPS satellite signals cannot pass through solid materials except glass Tinted window will also affect the performance of the GPS satellite reception GPS reception performance on each device may differ The system cannot determine the accuracy of the positioning results from different devices The values displayed in this system such as speed position and the distance warning to the speed camera set points may be inaccurate due to the influence of surrounding environment They are for your reference only 11 1 Introduction 1 1 Features Full HD Car Camcorder 1920x1080 O 30fps 2 4 LCD color screen 128 degree Wide angle lens Motion detection Automatic Emergency recording for collision detection Supports Micro SDHC up to 32GB Class 6 or greater speed required for HD video 1 2 Package Contents The package contains the following items In case there is any missing or damaged item contact your dealer immediately Car Recorder p m F C mm VJ N 12 Bracket Quick Start Guide CD ROM Warranty Card TAPA M A 1 3 Product Overview Front View Top and Bottom Views kis I l tins i T Side Left and Right Views Bracket Socket LED Light 6 HD Mini HDMI Connector Note To operate the device press the corresponding buttons 7 10 11 12 according to guide icons shown the screen
18. n 3 Press the A W button to select On and press the OK button Driver Fatigue Alert function will remind the driver should take a rest after continuing to drive for over one hour via bi bi sound from the device and also the alert picture as enclosed will be appear in A the LCD screen The product will remind the driver again after 30 minutes as each interval But the product will recalculate the alert time If the car stop moving over 5 minutes 21 3 1 3 Record all other types of videos 1 Press the OK button to start recording 2 Pressthe W button to stop recording Note 1 One video file is saved for every 3 or 5 minutes of recording See Using the Menu 4 1 2 The device saves the recording in the memory card If the memory card capacity is full the oldest file in the memory card is overwritten 3 1 4 Emergency Recording During Video Recording press the OK button to enter emergency recording mode the Emergency message will be shown immediately on the upper left corner of the screen and the recorded file will be protected To stop the recording press the W button Note 1 If the Collision Detection function is enabled and a collision is detected the device will automatically trigger the emergency recording 2 If the Collision Detection function is enabled and a collision is detected the emergency recording function of the device will automatically be triggered The emer
19. n Alert audible tone after an hour of driving Set the duration for the On Turn Off After 30 display to automatically sec Turn Off After 3 sk turn off right after video min Off recording starts Default On vore enl Enable Disable the voice On Off recording Default On Enable Disable the beep On Off Default On Warns the driver when the Voice Alert Off Speed Cam Alert vehicle is approaching a l speed camera Enable Disable the Automatic device to automatically On Off Record record video after the Default On device is turned on On Off Default Off Default Voice Alert Set the recording duration Record Interval for each recorded video file 3 min 5 min Default 3 min Enable Disable the motion detection If this function is enabled and the power off button is pressed the system alert message Press OK Key On Off Motion Detection to Power off or enter D i M efault Off motion detection after 10sec will pop on the screen Under motion detection mode the device will automatically start recording when any 32 object movement is detected Collision Detection Delay Shutdown Speed Position Management Speed Limit Alert Enable Disable the collision detection If this function is enabled and any collision is detected the device will automatically trigger the emergency recording Set the delay duration before turning off the p
20. of the car adapter to the USB connector of the camcorder 2 Plugthe other end of the car charger to the cigarette lighter socket of your vehicle Once the vehicle engine is started the camcorder automatically powers on Note 1 The orange LED lights up while the battery is charging 2 Please take note if the environment temperature reaches 45 C or above the car adapter still can supply power to camcorder but it will not charge the battery This is the characteristic of Lithium polymer battery and is not a malfunction 17 2 4 Powering the Camcorder On Off 2 4 1 Auto Power On Off Once the vehicle engine is started the device automatically turns on If the Automatic Record function is enabled the recording will automatically start right after the camcorder powers on See Set Automatic Recording 2 5 1 Once the vehicle engine shuts down the camcorder automatically saves the recording and turns off the power within 10 seconds See Delay Shutdown 4 2 2 4 2 Manual Power On Off To manually turn on the power press the POWER button To turn off press and hold the POWER button for at least 2 seconds To reset press and hold the POWER button for at least 4 seconds 2 5 Initial Settings Before using the device we recommend you to enable the Automatic Record function and set up the correct date and time 18 2 5 1 Set Automatic Recording To enable the recording to start automati
21. on Press the lt gt button to return to file selection Back display Guide icon Press the amp button to view the previous Previous video photo Guide icon Press the OK button to pause the video Pause playback Indicates the elapse time Battery Indicates the remaining battery power rs K 28 3 2 4 Deleting Files To delete file s do the following 1 If recording is in progress press the W button to stop recording 2 Pressthe lt button to enter the OSD menu 3 Press the A W button to select ERE File Deletion and press the OK button 4 Pressthe A W button to select the file category and press the OK button 5 Pressthe A W button to select the file that you want to delete and press the OK button to enter the Delete menu Delete the current displayed file Deletes all files 7 Press the OK button to confirm delete Note Deleted files CANNOT be recovered Ensure the files have backup before deletion 4 Adjusting the Settings 4 1 Using the Menu You can customize the video recording and other general settings via the on screen display OSD menus Menu P 1 5 Sri Menu P 2 5 Sa Menu P 3 5 era EETTLTTUITTTTNEN roma 1 1 If recording is in progress press the W button to stop recording 2 Press the lt button to enter the OSD menu 3 Pressthe A V button to select a menu option and press the OK button to enter the selected menu 4
22. op Guide i Press the OK button to continuously record uide icon l i lt a 12 Emergency the video in one file until the recording is gency manually stopped 3 1 6 Taking Photographs i 2014 01 01 12 00 00 x 44 You can also use this camcorder to take pre photos of the current scene From the standby screen press the W button to take a photo Note If recording is in progress press the W button to stop the recording first 3 1 7 4 GRID FUNCTION CHART in the LCD screen Please push 2 button when you are recording then you can see the 4 GRID FUNCTION CHART in the LCD screen Driving speed Driving direction 4 IN Distance warning to the speed camera set points Note The driving speed and driving direction will become gray scale chart if GPS has no signal 25 3 2 Playback Videos and Photos 1 26 If recording is in progress press the W button to stop recording The standby screen is displayed Press the lt button to enter the OSD menu Press 4A VW button the select File Playback and press the OK button Press the A W button to select the file category that you want to browse and press the OK button File Playback Press the A W button to view the Emergency previous or the next file and press Picture the OK button to view the file in full screen From the standby screen you can directly enter Playback mode by pressing amp button The last recorded video is displayed on t
23. ower Add speed point The satellite positioning will manually add speed to the camera location You can add up to 200 speed camera locations to the built in system Delete speed point All added speed camera locations will be deleted Set a customized maximum speed limit When the vehicle speed exceeds the maximum a warning tone is automatically triggered and a warning message is displayed on the screen Present a crisp and clear picture quality with harmonious contrast in a high contrast high discrepancy environment High Sensitivity Normal Sensitivity Low Sensitivity off Default Normal Sensitivity 10 sec Off Default 10 sec Add speed point Delete speed point Press 4 amp W button to set the speed limit You can set the speed limit from 50km h to 200km h Default Off On Off Default Off 33 Menu option Description Available option Menu option Description Available option Available option English S amp 8S rn fai ferax Sapo HX Pycckun Deutsch Fran ais Italiano Set the on screen display Espafiol Portugu s Language menu language T rkce Bahasa Indonesia Bahasa Melayu RET 1no zi all YKpaiHcbKa Default English Video Emergency File Deletion Delete the file s Default Reset all settings to Yes No factory default settings 34 5 Installing the Software 1 Place the CD disc bundled with the
24. ramework for the setting of eco design requirements for energy related products Notes on Installation 1 Install the device near the rear view mirror to obtain the best open field view Do NOT install the camcorder in a location that will obstruct your required driving view 2 Make sure that the lens is within the wiping range of the windscreen wiper to ensure a clear view even when it rains 3 Do not touch the lens with your fingers Finger grease may be left on the lens and will result in unclear videos or snapshots Clean the lens on a regular basis 4 Do not install the device on a tinted window Doing so may damage the tint film 5 Make sure that the installation position is not hindered by the tinted window 6 ln order to avoid the ripple in the LCD screen due to the car engine vibration suggest the driver to shift the gear to N Position for the temporary stop 10 Caution Use the authorized charger only Never disassemble by yourself Never short circuit the battery Dispose of the battery properly Exposing the battery to open flames can cause explosion Due to local laws and vehicles safety considerations do not operate the device while driving The results of GPS positioning are only for reference and should not affect the actual driving situation The system also cannot ensure the positioning accuracy GPS positioning accuracy may differ depending on weather and location such as high buildings tunne
25. se the QUICKTIME PLAYER software from the CD in the gift box package Problem Why the right figure appears on screen when power on Solution Remind the user to reset the time before start to use the device Problem Why can not see the driving road track when we use the SUPERCAR software Solution Video file mov TS format and GPS G sensor file NMEA format must in the same file folder Problem The device can not link with GPS Solution Please reset the device and try again Panasonic Corporation Web Site http panasonic net
Download Pdf Manuals
Related Search