User Manual FPM
Contents
1. User Manual FPM 7211W Series 21 5 Industrial Monitor with Projected Capacitive Touchscreen Direct VGA and DVI Ports AD ANTECH Enabling an Intelligent Planet Copyright The documentation and the software included with this product are copyrighted 2013 by Advantech Co Ltd All rights are reserved Advantech Co Ltd reserves the right to make improvements in the products described in this manual at any time without notice No part of this manual may be reproduced copied translated or transmitted in any form or by any means without the prior written permission of Advantech Co Ltd Information provided in this manual is intended to be accurate and reliable How ever Advantech Co Ltd assumes no responsibility for its use nor for any infringe ments of the rights of third parties which may result from its use Acknowledgements Intel and Pentium are trademarks of Intel Corporation Microsoft Windows and MS DOS are registered trademarks of Microsoft Corp All other product names or trademarks are properties of their respective owners This Manual Covers the Following Models E FPM 7211W P3AE Part No Edition 1 Printed in China March 2013 FPM 7211W Series User Manual ii Product Warranty 2 years Advantech warrants to you the original purchaser that each of its products will be free from defects in materials and workmanship for two years from the date of pur chase This warranty does not apply to any2. 1 8 Weight 8 kg 17 6 lbs 1 2 2 Touchscreen m Type Projected Capacitive touch Controller USB amp RS 232 interface E OS Support Microsoft WES7P XP WES2009 WinCE 6 0 Linux 1 3 LCD Specification Display Type Full HD TFT LED LCD Display Size 21 5 Max Colors 16 7 M Max Resolution 1920 x 1080 View Angle 178 V 178 H Luminance 300 cd m2 Storage Temperature 20 60 C Operating Temperature 0 50 C Contrast Ratio 5000 1 typ Lamp Life Time MTBF 50 000 hrs 1 4 Power Consumption m Max Power consumption 35 W E Power input Phoenix Jack 24 VDC input DC Jack external 57 W power adapter with 100 240 VAC input and 12 Vpc 4 75 A output Safety Standards BSMI CE FCC CCC UL FPM 7211W Series User Manual 2 1 5 Connectors The following connectors are situated on FPM 7211W Series VGA Port DB 15 This DB 15 connector can be connected to the system via the external 15 pin DB 15 connector located on the left side of the system unit DVI Port DVI D Connected with a standard DVI connector thru HO port of this unit Only sup ports digital signals Touchscreen Connector DB 9 This connector will be present only if a touchscreen is installed It must be con nected to the RS 232 port of the PC The touchscreen cable is included with all orders which include the touchscreen option Touchscreen Connector USB This connector will be present only if a touchscreen is installe
3. Setup Type Select the setup type that best suits your needs Extra R5232 interface driver for eGalaxT ouch controller Please check the check box for A5232 touch controller Select touch interface RS 232 or USB eGalaxTouch InstallShield Wizard If you are trying to install the USB touch device please make sure L P that your touch monitor or touch controller s USB cable is plugged into the computer now Please close the Found New Hardware Wizard dialog when it appears 29 FPM 7211W Series User Manual 3 Select support Multi Monitor or not Setup Type Select the setup type that best suits your needs IF you want to use Mult Monitor please check the box InstallShield Note Touch can support multi touch 18 5 4 point 21 5 5 point Touch 2 already do the default setting please note that no need to do calibration i The eGalaxTouch driver has been installed before operating touch function please do 4 point calibration Would you do 4 point calibration now FPM 7211W Series User Manual 30 Setting Serial Data for Expansion C 1 Setting Serial Data for Expansion The several kinds of timings below are already programmed in this module The input synchronous signals are automatically recognized Note Even if the preset timing is entered a little adjustment of the functions N such as Horizontal period CLK delay and display position are required E The adjusted values are
4. memorized in every preset number Note This module recognizes the synchronous signals with near preset timing N of the frequency of the HS and Vsync even in the case that the signals E other than the preset timing that were entered Note Because adjustments may not fit such as differing magnifying ratios or in the case that you use it except for the display timing that was preset E Recommend best resolution as 1920 1080 FPM 7211W Series User Manual 32 33 FPM 7211W Series User Manual ADVANTECH Enabling an Intelligent Planet www advantech com Please verify specifications before quoting This guide is intended for reference purposes only All product specifications are subject to change without notice No part of this publication may be reproduced in any form or by any means electronic photocopying recording or otherwise without prior written permis sion of the publisher All brand and product names are trademarks or registered trademarks of their respective companies O Advantech Co Ltd 2013
5. 211W Series User Manual 16 A 2 3 Contrast Brightness Setting E Generate Main Menu Select by Left and Right Button and then press Menu Button for selection confirmation m Main Menu DISPLAY IN SCREEN GH OSD AUTO Ka Ze XIT DD Lt PT Auto Exit Menu Enter E Sub Menu DISPLAY IN SCREEN CONTRAST CE 50 DIM BRIGHTNESS CO dd 50 a BRIGHTNESS pe esl 100 A SHARPNESS Em 50 RECALL VAULE Recall RECI REC2 Note RECALL VALUE Recall go back to display default setting RECALL VALUE RECT go to record 1 setting RECALL VALUE REC2 go to record 2 setting m Available Key Functions Power Off the LCD Mon Select to move up down itor Decrease the gauge value of the selected option Return to the previous Select to confirm menu O N A Select to move up down Increase the gauge value of the selected option 17 FPM 7211W Series User Manual A 2 4 Geometry Menu For DVI Input E Generate Main Menu Select by Left and Right Button press Menu Button for selection confirma tion E Main Menu DISPLAY IN SCREEN hx OSD AUTO N Auto Exit Menu Enter XT gt pa E Sub Menu DISPLAY IN SCREEN FOCUS 87 CLOCK 50 H POSITION 50 V POSITION 50 m Available Key Functions Power Off the LCD Mon Select to move up down itor Decrease the gauge value of the selec
6. NR Figure 2 2 Desktop Stand 11 FPM 7211W Series User Manual 2 1 3 2 VESA Mount FPM 7211W has been designed with support for the VESA mount standard Refer to figure 2 3 Supports 100mm VESA dimension Please use M4 screws Length 8mm to 10 mm Warning Use suitable mounting apparatus to avoid risk of injury N eooecosoN Figure 2 3 VESA Mount FPM 7211W Series User Manual 12 Appendix A OSD Operation Keypad A 1 OSD Board Overview The OSD keypad including six keys and a two color indicator is designed as the OSD operation interface Note This sheet is only for reference different models will has different styles 5 but the functionality is the same IE A 1 1 OSD Button Description Table A 1 OSD Button Description Power Turn the monitor power ON or OFF Auto Exit Automatically adjust the clock phase H position and V position Exit menu Down Right Increase Increase the brightness Move the selector to the next option Increase the gauge value of the selected option Up Left Decrease Decrease the brightness Move the selector to the previous option Decrease the gauge value of the selected option Menu Sel Activate the OSD menu Enter confirm the selected option Source Changes Input video source A 1 2 LED Function Table A 2 LED Function ON Blue StandBy OFF Bl
7. Power COP SUP P Ul ON uer GSE EM KR ao 2 Sos 3 DIMENSIONS EE 4 Figure 1 1 FPM 7211W Dumensions norr an 4 Power Connector Bracket 5 MOT le rsa Mounting the Monitor 8 2 1 1 Wall Mounting with FPM 7211W SMKE kt 8 Figure 2 1 Wall Mounting nennen nnnn nenne een nennnnenn 8 2 1 2 Panel Mounting ENEE 9 2 1 3 Desktop VESA Mount for EDM 211WW 11 Figure 2 2 Desktop Stand nenn nenn nenne nenn nennen 11 Figure 2 3 VESA Mount NENNEN 12 OSD Operation Keypad s ser 13 OSD Board Cverview ran ran rer rr rer rr rar RAR KARA KRKA KAR RK RR KOR 14 A 1 1 OSD Button Descrpton rer enn nin rann annen nn 14 Table A 1 OSD Button Description mssmmssrssressrrsrrerrresrenrrrnr ren rean 14 A12 LED RT 14 Table A 2 LED Funchon onen onen nano nnnenenenn 14 OSD Key FUNRCIlONnSs a en 15 EE EEE 15 A 2 2 Input Source Geert 16 A 2 3 Contrast Brightness Setting ssmmmssssssssressrrerrressrresrrerrrrrrrrrrrrrrn rna nn 17 A 2 4 Geometry Menu For DVI Input 18 A 2 5 Color Temperature Menu 19 A 2 6 Language Men 20 A 2 7 OSD Manager E 21 A 2 8 Auto Configuration Men 22 A 2 9 Mode Information Men 23 A 2 10 Memory Recall Menu 24 AZ TT PA MOTU nd 25 A 2 12 NOR 26 Touch Driver Installation 27 Touch Driver Installation c cccccecececcecececcuceceuenecceceneacaceueaueneneneaneneas 28 Setting Serial Data for Expansion 31 Setting Serial Data for Expansion rrrorrnnnrrnarernernnnnnrnnn
8. ansient overvoltage Never pour any liquid into an opening This may cause fire or electrical shock Never open the equipment For safety reasons the equipment should be opened only by qualified service personnel If one of the following situations arises get the equipment checked by service personnel The power cord or plug is damaged Liquid has penetrated into the equipment The equipment has been exposed to moisture The equipment does not work well or you cannot get it to work according to the user s manual The equipment has been dropped and damaged The equipment has obvious signs of breakage DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE MAY GO BELOW 20 C 4 F OR ABOVE 60 C 140 F THIS COULD DAMAGE THE EQUIPMENT THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT The sound pressure level at the operator s position according to IEC 704 1 1982 is no more than 70 dB A DISCLAIMER This set of instructions is given according to IEC 704 1 Advantech disclaims all responsibility for the accuracy of any statements contained herein V FPM 7211W Series User Manual FPM 7211W Series User Manual vi Contents Chapter 1 A NO ADAM Hd NIRO Chapter 2 2 1 Appendix A A 1 A 2 Appendix B B 1 Appendix C C 1 General Information NN KANN NN KN NN vun 1 Introduction MR 2 eler ler le 2 1 2 1 GEM ral EE 2 1 22 TNS o MEN 2 BO DES CC AON EEE EE 2
9. d It must be con nected to the USB port of the PC The touchscreen cable is included with all orders which include the USB touchscreen option Note RS 232 amp USB touchscreen interface allow connection into the system at the same time but USB interface has higher priority Also be noted E that when using USB touch interface and switch to RS 232 interface it need to restart your industrial PCs or workstation DC 12V Power In This connector will be connected to the DC 12V Switching Power Supply Plug In Block 3P Male ME050 50803 DC10 30V This block connector can be connected via the external plug in block 3P with flanges Female MC211 F103 connector 3 FPM 7211W Series User Manual 1 6 Dimensions Figure 1 1 FPM 7211W Dimensions FPM 7211W Series User Manual 4 1 7 Power Connector Bracket m FPM 7211W Series User Manual FPM 7211W Series User Manual Mounting
10. ice center for technical support if you need additional assistance Please have the following information ready before you call Product name and serial number Description of your peripheral attachments Description of your software operating system version application software etc A complete description of the problem The exact wording of any error messages FPM 7211W Series User Manual IV Safety Instructions 10 11 12 13 16 Read these safety instructions carefully Keep this User Manual for later reference Disconnect this equipment from any AC outlet before cleaning Use a damp cloth Do not use liquid or spray detergents for cleaning For plug in equipment the power outlet socket must be located near the equip ment and must be easily accessible Keep this equipment away from humidity Put this equipment on a reliable surface during installation Dropping it or letting it fall may cause damage The openings on the enclosure are for air convection Protect the equipment from overheating DO NOT COVER THE OPENINGS Make sure the voltage of the power source is correct before connecting the equipment to the power outlet Position the power cord so that people cannot step on it Do not place anything over the power cord All cautions and warnings on the equipment should be noted If the equipment is not used for a long time disconnect it from the power source to avoid damage by tr
11. itor Return to the previous menu Move the selector to the right Move the selector to the left Select to confirm N A 23 FPM 7211W Series User Manual A 2 10 Memory Recall Menu E Generate Main Menu Select by Left and Right Button R and then press Menu Button for selection confirmation Main Menu DISPLAY IN SCREEN ES Li Be OSD m ZS UT gt Auto Exit Menu Enter E Sub Menu DISPLAY IN SCREEN MEMORY RECALL m Available Key Functions N A N A Select to confirm N A FPM 7211W Series User Manual 24 A 2 11 Exit Menu Generate Main Menu Select EXT by Left and Right Button and then press Menu Button for selection confirmation E Main Menu DISPLAY IN SCREEN E Sub Menu DISPLAY IN SCREEN 25 FPM 7211W Series User Manual pedAsy uoneisdd GSO v xipuaddy A 2 12Hot Keys OSD LOCK UNLOCK HOT KEYS Press lt first and then press gt for change this setting Followed this sequence for the button press so that you can have OSD LOCK and UNLOCK setting E Enter OSD LOCK MODE Press HOT KEY the screen will show this action first Dont remove HOT KEY until the screen indicated this task is finished E Enter OSD UNLOCK MODE Press HOT KEY the screen will show this action first Don t remove the HOT KEY until the screen indicated this tas
12. k is finished FPM 7211W Series User Manual 26 Appendix B Touch Driver Installation B 1 Touch Driver Installation CD Driver supports Windows XP Windows Vista Windows 7 For drivers for other operating systems refer to http home eeti com tw web20 eg Touch Drives html 1 Install driver Welcome to the InstallShield Wizard for eGalaxT ouch The InstallShield Wizard will install eG alax Touch om pour computer To continue click Next dad eGalaxTouch License Agreement Please read the following license agreement carefully Declaration and Disclaimer The programs including but not limited to software and or firmware hereinafter referred to Programs or PROGRAMS are owned by eGalax eMPl Technology Inc hereinafter referred to EE TI and are compiled from EET Source code EET hereby grants to licensee personal non exclusive non transferable license to copy use and create denvatve works of Programs for the sole purpose in conjunction with an EET Product including but not limited to integrated circu and or controller Any reproduction copies modification translation compilation application or representation of Programs except as specihed above is prohibited without the express written permission by EET Disclaimer EET MAKES NO WARRANTY OF ANY KIND EXPRESS OR IMPLIED I do not accept the terms of the license agreement InstallShield FPM 7211W Series User Manual 28
13. m Wall Mounting m Panel Mounting E Desktop Mounting E Swing Arm Mounting 2 1 Mounting the Monitor The FPM 7211W Series can be mounted in many different ways The versatility of the FPM 7211W mounts enable it to be mounted on your desk or anywhere else 2 1 1 Wall Mounting with FPM 7181W SMKE Kit FPM 7211W can be mounted directly on a wall with panel mounting brackets Please refer to Figure 2 1 and follow the following steps to mount FPM 7211W on a wall OOOOOOO OOOOOOOGO Figure 2 1 Wall Mounting FPM 7211W Series User Manual 8 2 1 2 Panel Mounting FPM 7211W can be mounted directly on a panel with additional mounting brackets New easy installation can help you with one person for panel mounting 1 Screw to set up the snap hook out of upper side 2 Screw for the stopper screw out of down side 3 push the FPM 7211W into panel stopper screw and snap hook can hold the FPM 7211W 4 Add panel mount kits in rear side Fix 10pcs panel bracket around the industrial monitor refer to the below figure 9 FPM 7211W Series User Manual 10 FPM 7211W Series User Manual 2 1 3 Desktop VESA Mount for FPM 7211W 2 1 3 1 Desk top stand with FPM 7211W SMKE Kit FPM 7211W ccan be mounted as stand in the desk directly by a additional mounting brackets Please refer to figure 2 2 and follow these steps Q Q KAT
14. products which have been repaired or altered by persons other than repair personnel authorized by Advantech or which have been subject to misuse abuse accident or improper installation Advantech assumes no liability under the terms of this warranty as a consequence of such events Because of Advantech s high quality control standards and rigorous testing most of our customers never need to use our repair service If an Advantech product is defec tive it will be repaired or replaced at no charge during the warranty period For out of warranty repairs you will be billed according to the cost of replacement materials service time and freight Please consult your dealer for more details If you think you have a defective product follow these steps 1 Collect all the information about the problem encountered For example CPU speed Advantech products used other hardware and software used etc Note anything abnormal and list any onscreen messages you get when the problem occurs 2 Call your dealer and describe the problem Please have your manual product and any helpful information readily available 3 If your product is diagnosed as defective obtain an RMA return merchandize authorization number from your dealer This allows us to process your return more quickly 4 Carefully pack the defective product a fully completed Repair and Replacement Order Card and a photocopy proof of purchase date such as your sales receipt in a
15. ranennnnnnannnnnennnnne 32 vil FPM 7211W Series User Manual FPM 7211W Series User Manual viii General Information Sections include Introduction Specifications LCD Specification Power Consumption Connectors Dimensions 1 1 Introduction Advantech s FPM 7211W is a 21 5 wide screen color TFT LCD flat panel monitor built specifically for industrial applications With the its touchscreen FPM 7211W is an excellent and user friendly system control interface In addition to its usual application as an LCD panel monitor FPM 7211W comes standard with direct VGA and DVI control signal inputs making it compatible with Industrial PCs and Workstations Its OSD On rear cover function allows you to adjust display factors such as brightness contrast colors and VGA signal informa tion Functions that are more and more critical as HMI users become aware of the benefits of flat panel monitors The whole chassis is of SECC steel and the front panel is of aluminum with IP65 compliance With new multi touch technology this monitor can be immediately transformed into a remote control system The Advantech FPM 7211W is the ultimate HMI solution for your industrial application 1 2 Specifications 1 2 1 General Construction Die cast Magnesium alloy front bezel and SECC rear cover Front panel IP65 Compliant Control OSD control pad on rear Mounting Panel wall desktop VESA Dimensions W x H x D 561 x 356 x 45 7mm 22 1 x 14 x
16. shippable container A product returned without proof of the purchase date is not eligible for warranty service 5 Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer lil FPM 7211W Series User Manual Declaration of Conformity This device complies with part 15 of the FCC rules Operation is subject to the follow ing two condition 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation FCC Class A Note This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Opera tion of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Technical Support and Assistance 1 Visit the Advantech web site at www advantech com support where you can find the latest information about the product 2 Contact your distributor sales representative or Advantech s customer serv
17. ted option Return to the previous Select to confirm menu O Select to move up N A down Increase the gauge value of the selected option FPM 7211W Series User Manual 18 A 2 5 Color Temperature Menu E Generate Main Menu Select oe by Left and Right Button and then press Menu Button for selection confirmation m Main Menu DISPLAY IN SCREEN 23 r He Ir OSD AUT RH Exit Auto Exit Menu Enter E Sub Menu DISPLAY IN SCREEN COOL USER m Available Key Functions Select to move up down Decrease the gauge value of the selected option Return to the previous Select to confirm N A Power Off the LCD Monitor Select to move up down Increase the gauge value of the selected option 19 FPM 7211W Series User Manual A 2 6 Language Menu E Generate Main Menu Select by Left and Right Button and then press Menu Button for selection confirmation m Main Menu DISPLAY IN SCREEN KE Si Bi ol OSD BAUTO N EXIT Auto Exit Menu Enter E Sub Menu DISPLAY IN SCREEN MR m Available Key Functions Power Offthe LCD Mon itor Return to the previous menu Move the selector to the right FPM 7211W Series User Manual Move the selector to the left Select to confirm A 2 7 OSD Manager Generate Main Menu Select by Left and Right Button and then press Menu Bu
18. tton for selection confirmation Main Menu DISPLAY IN SCREEN e de R Auto Exit Menu Enter Or Le E Sub Menu DISPLAY IN SCREEN H POSITION mmm 50 ch V POSITION k 50 TIMEOUT 10 m Available Key Functions Power Off the LCD Mon Select to move up down itor Decrease the gauge value of the selected option Return to the previous Select to confirm menu O Select to move up N A down Increase the gauge value of the selected option 21 FPM 7211W Series User Manual A 2 8 Auto Configuration Menu E Generate Main Menu Select AR by Left and Right Button and then press Menu Button for selection confirmation m Main Menu DISPLAY IN SCREEN ra OS of Auto Exit Menu Enter EN PT X E Sub Menu DISPLAY IN SCREEN AUTO CONFIG m Available Key Functions Power Off the LCD Mon N A itor Return to the previous Select to confirm menu O N A N A FPM 7211W Series User Manual 22 A 2 9 Mode Information Menu E Generate Main Menu Select Oo confirmation E Main Menu DISPLAY IN SCREEN s S e My OSD LI EXIT JE UT Auto Exit Menu Enter E Sub Menu DISPLAY IN SCREEN 1280 x 800 60Hz VGA by Left and Right Button and then press Menu Button for selection m Available Key Functions Power Off the LCD Mon
19. ue Blinking No Signals Orange FPM 7211W Series User Manual 14 A 2 A 2 1 OSD Key Functions Each selected value is stored into LCD memory after SEL signal input or time out The stored values are not affected if the power is turned off But the selected value is not available in case a selected mode is changed before time out or power is turned off before time out TIME OUT gt 5 6 seconds Can be set in OSD Manager The default definition of input keys is shown as following Menu Start Generate Main Menu Press MENU Button in OSD function key m Main Menu DISPLAY IN SCREEN gt Eo Joar Auto Exit Menu Enter E Sub Menu DISPLAY IN SCREEN N A E Available Key Functions Turn off turn off back Move the selector to the left light Select the sub menu Select to exit the menu Confirm or wait for time out O Enter the selected option Move the selector to N A the right Select the sub menu 15 FPM 7211W Series User Manual A 2 2 Input Source Select E Generate Main Menu Select by Left and Right Button and then press Menu Button for selection con firmation E Main Menu DISPLAY IN SCREEN Auto Exit Menu Enter E Sub Menu DISPLAY IN SCREEN ANALOG INPUT DIGITAL INPUT m Available Key Functions Power Off the Select to move up down LCD Monitor Return to the previous Select to confirm a u N A Select to move up down FPM 7
Download Pdf Manuals
Related Search