WPC-0600 User Manual
Contents
1. Read our privacy policy Can Windows connect to Windows Update to search hor software Yes this time only i Tes now and every time connect a device No not this time Click Next to continue 10 Select Install the software automatically Recommended to allow it to complete the installation of the Windows driver and then click Next Found New Hardware Wizard This wizard helps you install software for LevelOne WPC 0600N One Wireless CardBus Adapter Pali i If your hardware came with an installation CD 482 or floppy disk insert it now What do you want the wizard to do C Install the software automatically Recommended O Install from a list or specific location Advanced Click Next to continue Figure Install the software automatically N One Wireless CardBus Adapter 11 If using Windows XP you may see a warning screen like the example below If you do see this screen just click Continue Anyway Hardware Installation A The software you are installing for this hardware LevelOne PC 0600 N One Wireless CardBus Adapter has not passed Windows Logo testing to verify its compatibility with Windows SP Tell me why this testing te important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommend that you stop this installation now and contact the2. 288 bps 192 168 0 1 192 168 0 1 l O bps Figure Network Status Screen You may have to wait a few seconds for the screen to be populated Data Network Status Screen Link Information Current Status Network SSID Network BSSID Network Type Security Mode Tx Rx Speed Internet Protocol DHCP Option IP Address Subnet Mask It will indicate the current link status It shows the SSID or network name of the selected wireless network It shows the MAC address of the access point This will indicate Infrastructure or Ad hoc It shows the wireless security that the wireless network is using It shows the current wireless connection speed It shows if the IP address was automatically obtained from a DHCP server It shows the current IP address on the wireless interface Subnet mask for the current IP address 19 N One Wireless CardBus Adapter Default Gateway Gateway IP address associated with the current IP address DHCP Server It shows the IP address of the DHCP Server Channel Performance Channel It graphically presents the Transmission Tx rate and Receiving Performance Rx rate over time Signal Signal It graphically presents the Signal strength The Channel Performance diagram indicates the real time TX and RX 20 N One Wireless CardBus Adapter About Screen This screen displays details of the traffic sent or received on the current Wireless network Site Survey
3. e Access Points use a fixed Channel You can select the Channel used This allows you to choose a Channel which provides the least interference and best performance In the USA and Canada 11 channels are available If using multiple Access Points it is better if adjacent Access Points use different Channels to reduce interference e n Infrastructure mode Wireless Stations normally scan all Channels looking for an Access Point If more than one Access Point can be used the one with the strongest signal is used This can only happen within an ESS e f using Ad hoc mode no Access Point all Wireless stations should be set to use the same Channel However most Wireless stations will still scan all Channels to see if there is an existing Ad hoc group they can join WEP 8 WPA PSK Both WEP and WPA PSK are standards for encrypting data before it is transmitted This is desirable because it is impossible to prevent snoopers from receiving any data which is transmitted by your Wireless Stations But if the data is encrypted then it is meaningless unless the receiver can decrypt it WPA PSK is a later standard than WEP and is more secure Wireless LAN Configuration To allow Wireless Stations to use the Access Point the Wireless Stations and the Access Point must use the same settings as follows Mode SSID ESSID Security On client Wireless Stations the mode must be set to Infrastructure The Access Point is
4. LevelOne User Manual WPC 0600 N_One Wireless CardBus Adapter V2 0 0 0712 Safety FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help To assure continued compliance any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment Example use only shielded interface cables when connecting to computer or peripheral devices FCC Radiatio
5. Profile Manager Wireless Adapter Information Regional Domain Firmware Version Driver Version MAC Address Utility Information LevelOne DLL Version LevelOne Utility Version C Auto Profile Connect LevelOne Wireless Utility WPC 0600 Network Status About Channel 1 13 Visit Levelllne Website 16 0 3 107 6 0 3 107 772372007 00 00 02 10 00 12 1 8 0100 10 5 2007 11 8 1 50 10 11 2007 Figure About Screen This tab shows the following information Regional Domain Firmware Version Driver Version MAC Address LevelOne DLL Version LevelOne Utility Version 2 N One Wireless CardBus Adapter Appendix A Specifications Wireless Adapter Model LevelOne WPC 0600 N_One Wireless CardBus Adapter Standards IEEE 802 11b IEEE 802 119 Draft 802 11n compliant 20 MHz BW 130 117 104 78 52 39 26 13 Mbps 40 MHz BW 270 243 216 162 108 81 54 27 Mbps 802 1 1n Draft 802 11n BPSK QPSK 16 QAM 64 QAM Media Access Protocol CSMA CA Operating Voltage 3 3V15 ModulsionTeomniques eso ooo manamit Power y Draft 802 11n 116 5 2 dBm Radius 22 N One Wireless CardBus Adapter Appendix B About Wireless LANs This Appendix provides some background information about using Wireless LANs WLANs Wireless LANs can work in either of two 2 modes e Ad hoc e Infrastructure Ad hoc Mode Ad hoc mode does not require an
6. One Wireless CardBus Adapter LevelOne WPC 0600 InstallShield Wizard Ready to Install the Program The wizard is ready to begin installation Click Install to begin the installation Fou want bo review or change any of your installation settings click Back Click Cancel to exit the wizard Figure Ready to install the program 7 Click Continue Anyway on the screen below Software Installation A The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows lt P Tell me why this testing le important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this installation now and contact the software vendor for software that has passed Windows Logo testing Continue Anyway STOP Installation Figure Installation Screen 8 Press the Cardbus Card firmly into the slot then click OK EN Please insert wireless adapter into your computer Figure Insert wireless adapter N One Wireless CardBus Adapter 9 The Windows New Hardware wizard screen will appears click Next Found Hew Hardware Wizard Welcome to the Found New Hardware Wizard Windows will search for current and updated software by looking on your computer on the hardware installation CD or on the Windows Update Web site with your permission
7. hardware vendor for software that has passed Windows Logo testing Continue Anyway STOP Installation Figure Windows XP Warning If the wizard can not Install the driver automatically please search for driver in the default location The driver is located in C Program Files LevelOne WPC 0600 Driver directory 12 When the Wizard has finished installing the software click Finish Found New Hardware Wizard Completing the Found New Hardware Wizard The wizard has finished installing the software for LevelOne WPC 0600N One Wireless CardBus Adapter Click Finish to close the wizard Figure Complete the Found New Hardware Wizard N One Wireless CardBus Adapter 13 When the Windows wizard is complete you will now have a new icon in your system tray as shown below y 276 AM Figure System Tray Icon Wireless Adapter Icon Table Connection to the Wireless Adapter is established The length of green color indicates the signal strength a No connection to the Wireless Adapter NO fin Wireless Adapter is unplugged 14 You can double click this icon to configure the Wireless interface See the following chapter for details N One Wireless CardBus Adapter Chapter 3 Using the Windows Utility This Chapter provides Setup details for the AP mode of the Wireless Adapter Overview If using Windows you can use the supplied utility to configure the Wireless interface To Use the sup
8. Access Point or a wired Ethernet LAN Wireless Stations e g notebook PCs with wireless cards communicate directly with each other Infrastructure Mode In Infrastructure Mode one or more Access Points are used to connect Wireless Stations e g Notebook PCs with wireless cards to a wired Ethernet LAN The Wireless Stations can then access all LAN resources Access Points can only function in Infrastructure mode and can communicate only with Wireless Stations which are set to Infrastructure mode BSS ESS BSS A group of Wireless Stations and a single Access Point all using the same ID SSID form a Basic Service Set BSS Using the same SSID is essential Devices with different SSIDs are unable to communicate with each other ESS A group of Wireless Stations and multiple Access Points all using the same ID ESSID form an Extended Service Set ESS Different Access Points within an ESS can use different Channels In fact to reduce interference it is recommended that adjacent Access Points SHOULD use different channels As Wireless Stations are physically moved through the area covered by an ESS they will automatically change to the Access Point which has the least interference or best performance This capability is called Roaming Access Points do not have or require Roaming capabilities Z5 N One Wireless CardBus Adapter The Wireless Channel sets the radio frequency used for communication
9. Fi Protected Setup screen of the Access Point Enter the PIN from my Select this to use the PIN method Entering the PIN from access point your access point in the Wi Fi Protected Setup screen of the Access Point and click Start button to continue You will see the following screen if WPS configuration is success Wi Fi Protected Setup WPS Configuration Success Ill Join a Wireless Network Metwork Name 55I0 Automatic Selection O Push the Button on my access point Enter a PIN into my access point O Enter the PIN from my access point Close Figure WPS Success Screen 18 N One Wireless CardBus Adapter Network Status Screen This screen displays the status of the current wireless link Clicking the Network Status tab will display a screen like the following LevelOne Wireless Utility WPC 0600 Site Survey Link Information Current Status Network 5510 Network BSSIO Network Type Authentication Mode Encryption Method Tx Rs Speed Internet Protocol TCF IP DHCP Option IP Address Subnet Mask Default Gabeway DHCP Server C Auto Profile Connect Profile Manager Network Status About Channel Performance Signal Connected WBR 5000 Current Tx Rate O bps 2 1 Ebpz DOCO02FFB40E Infrastructure WPA2P5K AES 300 Mbps 300 Mbps 1 1 kbp O bps Current As Rate 0 bps Enable arh bps 192168104 2562662550
10. System Tradicion 9 AUTO CONNECT iniia E E E E E n 10 SHE SUIVEY SEEN NAINA aaa AA 10 Profile Manager Screen venida od 13 Network Status SERENA AA ANAN ANA 19 ADOUL SCIEN ANAN A A AABANG 21 APPENDIX A SPECIFICATIONS naaa AASA ANA NATA SAAN AA 22 Wireless Adapter uni ii dis 22 APPENDIX B ABOUT WIRELESS LANS ccccccccoonnnnncncnnnnnnnnnnnononnnnnonnnnannannnnnnnnnnnnnnns 23 MODES cuina 23 A A ERA AN NO AA AA 23 AA 24 WEPWPA PSK aaa tt o ai 24 Wireless LAN Contiqlifa ON nario od 24 N One Wireless CardBus Adapter Chapter 1 Introduction This Chapter provides an overview of the Wireless Adapter s features and capabilities Congratulations on the purchase of your new Wireless Adapter The Wireless Adapter provides a wireless network interface for your Notebook or PC Package Contents The following items should be included e WPC 0600 e Quick Installation Guide e CD Manual Driver Utility If any of the above items are damaged or missing please contact your dealer immediately LEDs Wireless Adapter The Wireless Adapter has Power and Link Act LED Power LED e On The Adapter s wireless networking is enabled e Off The Adapter s wireless networking is disabled Link Act LED e On The Adapter has an active connection e Off The Adapter has not an active connection e Blinking Data being transferred N One Wireless CardBus Adapter You should install the supplied software on the CD ROM before inserting the
11. Wireless Site Survey Filter Display PC To PE d Hoc Display 802 116 Access Points Display 602 114 Access Points Display 802 119 Access Points Network Name MAC Address Security CH Signal Frequency Network Type Man wWBR 6000 00 CO 02 FF B4 0E WEP 11 Bo 4bB2GHz Infrastructure Ta corega 00 04 19 87 03 4D WEP E 40 2437 GHz Infrastructure Figure Site Survey Screen Connected 12 N One Wireless CardBus Adapter Profile Manager Screen This screen is accessed by clicking the Profile Manager tab on the main screen LevelOne Wireless Utility WPC 0600 Site Survey Profile Manager Metwork Status Profile Setting Profile Name Security wPC 0600 Mm Authentication Mode WPA2 PSK Network Name 55ID Encryption Method AES WER BO00 el Advance Settings WPS Function Enter 8 63 Characters Network Type Passphraze essssasas CO Infrastructure Ad Hoc Confirm Cee Import Profiles Export Profiles Delete Profile Save Profile Apply Profile C Auto Profile Connect Figure Profile Manager Screen Data Profile Manager Screen Profile Name Enter or select a suitable name for this profile Each profile must have a unique name before user can actually save the profile Network Name If the desired wireless network is currently available you can SSID select its SSID Otherwise type in the SSID of the desired wireless network Advanced On the resulting sub screen ente
12. Wireless adapter N One Wireless CardBus Adapter Chapter 2 Initial Installation This Chapter covers the software installation of the Wireless Adapter e Windows 2000 XP Vista e CardBus Card Slot e CD ROM Drive e IEEE802 11n IEEE802 11b or IEEE802 11g Wireless LAN Procedure IMPORTANT Do not insert the Adapter into your computer BEFORE installing the supplied software from the LevelOne CD 1 Insert the CD ROM into the drive on your PC 2 The installation program should start automatically If it does not run autorun exe program 3 Select the WPC 0600 and click Utility on the screen LevelOne N One ev H on WPC 0600 M One Wireless CardBus Adapter Figure Select the Utility of WPC 0600 4 Select the desired installation language on the screen N One Wireless CardBus Adapter LevelOne WPC 0600 InstallShield Wizard Choose Setup Language Select the language for the installation from the choices below Chinese Simplified Chinese aaa German Japanese lnstallshieid Figure Select language 5 On the screen below click Next to start the installation LevelOne WPC 0600 InstallShield Wizard Welcome to the InstallShield Wizard for LevelOne WPC 0600 The InstallShield Wizard will install Level ne WPC 0600 on your computer To continue click Next Figure Start Installation 6 Ready to install the program click Install to begin the installation N
13. always in Infrastructure mode Wireless Stations should use the same SSID ESSID as the Access Point they wish to connect to Alternatively the SSID can be set to any or null blank to allow connection to any Access Point The Wireless Stations and the Access Point must use the same settings for Wireless security Disabled WEP WPA PSK WEP If WEP is used the WEP Key must be the same on the Wireless Stations and the Access Point WEP Authentication Open System or Shared Key must also be the same unless the Access Point supports both methods simultaneously WPA PSK If using WPA PSK the PSK Pre shared Key must be entered on each Wireless station The encryption key is derived from the PSK and changes frequently WPA2 PSK This is a later version of WPA WPA PSK The major change is the use of AES Advanced Encryption System for protecting data AES is very secure considered to be unbreakable The PSK Pre shared Key must be entered on each Wireless station 24
14. ard Interval This value is set as Auto Extension Auto selects the wireless channel The value is set to Auto It Channel will auto select the most suitable channel Antenna Selection The default value is set to Auto WPS Function Screen The Wi Fi Protected Setup WPS is to simplify the security setup and management of Wi Fi networks WPS Wi Fi Protected Setup allows consumers to protect their home networks by using the push button configuration on the router or entering an 8 digit PIN code if there s no button You will see the WPS screen when you try to connect the wireless network with the WPS function Wi Fi Protected Setup WPS Configuration Join a Wireless Network Network Name SSID Automatic Selection O Push the Button on my access point Enter a PIN into my access point O Enter the PIN from my access point Enter the PIM 10904732 into your access point and click Start Button to continue Figure WPS Function Screen 17 N One Wireless CardBus Adapter Data WPS Function Screen Network Name SSID Select the desired wireless network from the drop down list Push the Button on Select this and click Start button Then push the WPS my access point button of the Access Point Enter a PIN into my Select this to use the PIN method It will automatically access point generate the new pin code displayed in the field Click Start button and copy the value and paste in the Wi
15. cters Other Wireless Stations must use the same key 14 N One Wireless CardBus Adapter Confirm For WPA PSK and WPA2 PSK modes re enter the value in this field 802 1x For WPA Radius and WPA2 Radius modes select the desired Authentication option in the drop down list Protocol Configure WPA For WPA Radius and WPA2 Radius modes click this button to Radius open a sub window where you can enter details of the Radius Server To add a profile 1 On the Profile Manager tab complete the settings on this screen Please make sure to specific the Profile name 2 Verify that the settings you configured are correct 3 Click Save Profile To export profiles 1 On the Profile Manager tab click Export Profiles The Save As dialog box appears 2 Type a name for the profile that you are saving and then verify that the file name extension is set to cfg 3 Click Save To import profiles 1 On the Profile Manager tab click Import Profiles The open dialog box appears 2 Select the profile set that you want to import 3 Click Open To delete a profile 1 On the Profile Manager tab select the profile that you want to delete 2 Click Delete Profile To edit a profile 1 On the Profile Manager tab select the profile that you want to edit 2 Change the profile settings as necessary 3 Click Save Profile To enable a profile 1 Inthe list of available profiles click the profile that you want to enable 2 Cl
16. ddress of the Access Point or Wireless station if the network is an Ad hoc network Security Data encryption and authentication methods used on the wireless network WPS This will indicate Y the Access Point with WPS function Y the WPS function of the Access Point is in used or the Access Point without WPS function CH The channel used by the Wireless network Signal This is displayed as percentage 0 100 Frequency The Wireless band used by this Wireless network Network Type This will indicate Infrastructure displayed device is an Access Point or Ad hoc displayed device is a Wireless station Status The area to the left of the Rescan button shows the current status In the example above it shows Connected Rescan Click this button to rescan for all Wireless networks Wireless Network Sequence order You can click the headings ex Network Name MAC Address Security of the Wireless network table to arrange the Wireless network in the desired order To Connect to a Wireless Network e Double click on the desired network e Click the name of the wireless network to which you want to connect and then click Connect Note that once you are connected to a Wireless network the Site Survey screen will identify the current wireless network with a blue icon as shown below 11 N One Wireless CardBus Adapter LevelOne Utility WPC 0600 Site Survey Profile Manager Network Status
17. ick Apply Profile 15 N One Wireless CardBus Adapter Advanced Settings Screen Once you have created a profile as described above the Advanced Settings tab will be available on the Profile Manager screen Note Advanced settings only available when 1 1b g wireless mode has been selected Advance 5ettings Protocol Do not change settings Preamblel2 4GHa2 Transmit Rate Fragment Threshold 256 RTSICTS Threshold 356 802 11n Enable 802 11 Network Channa ai Auto Guard Interval Auto Extension Channel Antenna Selection Auto Figure Advanced Settings Screen Data Advanced Settings Screen Do not change Enable this check box if you don t want to modify the settings in settings this screen Preamble Normally this should be left at Auto 2 4GHz The option Short Long preamble and header is intended for special application and equipment Transmit Rate Use this to manually set the speed if desired The default is Auto 16 N One Wireless CardBus Adapter Fragment The default value is 2346 In some cases you may be able to Threshold improve performance by adjusting this value RTS CTS The default value is 2346 In some cases you may be able to Threshold improve performance by adjusting this value 802 11n Enable 802 11n 802 11n wireless network connectivity Network Channel Width The value is set as Auto Gu
18. n Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation This transmitter must not be co located or operating in conjunction with any other antenna or transmitter CE Declaration of conformity This product complies with the 99 5 EEC directives including the following safety and EMC standards e EN300328 2 e EN301489 1 17 e EN60950 CE Marking Warning This is a Class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures ALPA Table of Contents CHAPTER 1 INTRODUCTION s ecceeeeeecceeeeeeeccnnnnnnsesseeeeneeceeeeeeecconnnnnsseeees 1 Package Conan ba ANAN a 1 LEDS aaa A bA kaa AG 1 OperalloN aaa NANA ANA eats 2 CHAPTER 2 INITIAL INSTALLATION 11111100000aaaaaa aaa aaa snannanaa nnne nnnnnnn 3 o nn A 3 e ANNA NAAN O 3 CHAPTER 3 USING THE WINDOWS UTILITY ccccccccnnnnnncncnanananonononononononononanacananannn 9 ONE Naa AA eatecnear es 9
19. n the Profile Manager tab select the desired profile in the list and click the Apply Profile button e On the Site Survey tab either double clicks the network in the list or selects the network and click the Connect button Site Survey Screen This screen is displayed when you double click the system tray icon You can also click the Site Survey Tab in the screen LevelOne Wireless Utility WPC 0600 site Survey Profile Manager Network Status About Wireless Site Survey Filter Display PE To PE 4d Hoc Display 807 11b Access Points lay 80 jccezs Poor Display 802 119 Access Points Network Name MAL Address Security PS i Network Tupe li Pan W BA BOOO O0 CO O2 FF 64 0E WEP Infrastructure fq WAF 0003 00 11 6B 60 64 C5 WEP E Infrastructure g WPG 1000 00 07 36 00 40 C4 WEP Infrastructure gn 00C0021 23585 O0 C0 02 1 2 35 85 WEP Infrastructure He5can DisConnect C Auto Profile Connect Figure Site Survey Screen 10 N One Wireless CardBus Adapter Data Site Survey Screen Display PC To PC Select this check box to display ad hoc computer to computer Ad Hoc networks Display 802 11b Select this check box to display 802 1 1b infrastructure Access Points networks Display 802 119 Select this check box to display 802 119 infrastructure Access Points networks Network Name Available wireless networks are listed MAC Address This is the MAC a
20. plied Windows utility for Configuration e Right click the System Tray icon e From the pop up menu select Restore This Chapter assumes you are using the supplied WPC 0600 Wireless LAN Utility System Tray Icon If the Wireless LAN Utility program is running you can double click the icon in the System Tray to open the application If the program is not running you can start it using the option in the Start menu created by the installation For the Wireless Adapter this will be Start Programs LevelOne WPC 0600 WPC 0600 Wireless LAN Utility Status Information The menu options available from the System Tray icon are e Restore This will display the main screen e Radio Off The wireless adapter is not associated with the network when the radio is off e WZC On Wireless Zero Configuration WZC is a service of Microsoft Windows which dynamically selects a wireless network to connect e Exit Terminate the connection to the Wireless Adapter Restore Radia OFF Wel On Exit Figure Wireless Adapter menu N One Wireless CardBus Adapter Connecting to a Wireless Network Double click the Icon to open the Site Survey screen when you can select the Wireless network you wish to join Auto Connect Normally this option should be enabled The adapter will then connect to an available network which was connected successfully last time There are various methods to specify the required network e O
21. r the required data for the Settings advanced settings Advanced settings only available under 11b g wireless environment WPS Function WPS Wi Fi Protected Setup can simplify the process of connecting any device to the wireless network by using the push button configuration PBC on the Wireless Access Point or entering an 8 digit PIN code Network Type Select the desired option e Infrastructure Select this to connect to an Access point e Ad Hoc Select this if you are connecting directly to another computer 13 N One Wireless CardBus Adapter Wireless Mode Prefer Channel Authentication Mode Encryption Method Create with Passphrase Enter Key Manually Passphrase Select the desired wireless mode to which you want to connect This option only available under Ad Hoc mode it allows user to select the prefer channel Select the channel you would like to use under Ad Hoc mode Channel 1 13 You MUST select the option to match the Wireless LAN you wish to join The available options are e Open System Broadcast signals are not encrypted This method can be used only with no encryption or with WEP e Shared Key Broadcast signals are encrypted using WEP This method can only be used with WEP e Auto Switch This is another WEP system it will select either Open System or Shared Key as required e WPA PSK PSK means Pre shared Key You must enter this Passphrase value it is used for both a
22. uthentication and encryption e WPA2 PSK This is a further development of WPA PSK and offers even greater security You must enter this Passphrase value it is used for both authentication and encryption e WPA Radius This version of WPA requires a Radius Server on your LAN to provide the client authentication according to the 802 1x standard Data transmissions are encrypted using the WPA standard e WPA2 Radius This version of WPA2 requires a Radius Server on your LAN to provide the client authentication according to the 802 1x standard Data transmissions are encrypted using the WPA2 standard The available options depend on the Authentication method selected above The possible options are e Security Off No data encryption is used e WEP If selected you must enter the WEP data shown below This WEP data must match the Access Point or other Wireless stations e AES TKIP These options are available with WPA PSK WPA2 PSK WPA Radius and WPA2 Radius Select the correct option Enable this check box and enter a word or group of printable characters in the Passphrase box select the desired encryption to automatically configure the WEP Key Enable this check box and select the desired key in the drop down list Then enter the key values you wish to use and select the desired encryption Other stations must have matching key values For WPA PSK and WPA2 PSK modes you need to enter the desired value 8 63 chara
Download Pdf Manuals
Related Search