Learning Environments user guide - Student IT
Contents
1. Learning Environments user guide THE UNIVERSITY OF Giblin Eunson Library project rooms MELBOURNE Giblin Eunson Library project rooms are located in the Giblin Eunson Library in the ICT building at 111 Barry St Carlton They contain the following equipment e LCD screen e Push button controls e Laptop connectivity e Auxiliary input Using the push button controls The push button control system controls the multimedia equipment in this room To operate a piece of equipment 1 Press the ON button System power 2 Press the button for the multimedia device you want to display LAPTOP or AUX 3 Use the audio controls to change device volume Audio controls Multimedia devices Turning off the multimedia system Please turn off the multimedia system when you have finished To turn off the multimedia system press and hold the OFF button Using your laptop Laptops differ depending on the model manufacturer and operating system installed Because of this we cannot guarantee your laptop will work straight away when connecting It to the project room s multimedia system We recommend familiarising yourself with connecting your laptop to an external monitor or projector The cables to connect your laptop to the multimedia system are in the project room s desk cavity Copyright The University of Melbourne September 2011 1 Learning Environments user guide Giblin Eunson Library project rooms 1 Conn2. When you have finished turn off the multimedia system Read Turning off the multimedia system for instructions NOTE Pressing stop on the push button controls blanks the LCD screen Press play to start displaying again Report any errors or omissions in this user guide to les guides unimelb edu au The University of Melbourne has used its best endeavours to ensure that material contained in this publication was correct at the time of printing The University gives no warranty and accepts no responsibility for the accuracy or completeness of information and the University reserves the right to make changes without notice at any time in its absolute discretion Users of this publication are advised to reconcile the accuracy and currency of the information provided with the relevant department of the University before acting upon or in consideration of the information Copyright in this publication is owned by the University and no part of it may be reproduced without the permission of the University Copyright The University of Melbourne September 2011 2
3. ect the VGA cable to your laptops VGA output Depending on what model laptop you have e g Apple Mac you may need a VGA adapter VGA output 2 Connect the audio cable if required to your laptop s headphone output 3 Connect the network cable if required to your laptop s LAN input indicated by this symbol Your laptop must be configured to obtain an IP address automatically LAN input 4 Press ON on the push button controls Read Using the push button controls for instructions on using the push button controls Press LAPTOP on the push button controls 6 Use the Vol and Vol buttons on the push button controls to adjust volume 7 When you have finished turn off the multimedia system Read Turning off the multimedia system for instructions NOTE Pressing stop on the push button controls blanks the LCD screen Press play to start displaying again Using the auxiliary input Auxiliary input cables are located in the desk cavity Use the auxiliary inputs to connect user supplied equipment e g digital camera to the multimedia system Video and audio inputs are available 1 Connect the auxiliary input cables to your device s audio and or video outputs 2 Press ON on the push button controls Read Using the push button controls for instructions on using the push button controls Press AUX on the push button controls 4 Use the Vol and Vol buttons on the push button controls to adjust volume
Download Pdf Manuals
Related Search