Vital Force MKIII user guide.
Contents
1. ER ON LED does not light then go to the charging step see below d Press the START button ifthe green RUNNING BATTERY OK LED does not light then go to the charging step see below e Your new Vital Force MKIII is now ready for use simply switch the unit off to cancel the RUNNING process a 3 Charging the Vital Force MKIII note 1 a Select the Power Switch to the OFF CHARGE position b Plug the Power Adapter note 2 into the CHARGER socket on the rear panel c Allow approximately 24 hours to fully charge note 1 Charging is only recommended when the battery will no longer power the unit i e when the BATTERY OK light does not light when the START button is depressed Avoid topping up the battery for best results note 2 Using any other adapter other than the unit supplied may void your warranty 4 Controls Indicators and connections Controls and Indicators of the Vital Force MKIII front panel POWER ON Indicates when the power g MULTIPLIER Provide a visual indication LED switch is turned on LED s of the selected Orange Red Multiplication factor RUNNING Indicates when the unitis h MULTIPLIER Selects the Multiplication BATTERY OK running and also that the dial factor LED battery is in a satisfactory Green state of charge If this LED does not light then the unit may need to be charged T2. IME LOG mins Sets the time the l POTENCY x100 Selects the 100 s value of dial Potentiser runs for dial the potency This does not shut down the unit when finished OFF CHARGE Sets the Potentiser to j POTENCY x10 Selects the 10 s value of ON POWER ON or CHARGE dial the potency switch mode Note the unit cannot recharge when in use START Starts the process k POTENCY x1 Selects the units value of button selected dial the potency INVERT Select to either Invert or I COPY Shows the position to set POTENTISE Potentise the substance selection the Potentiser to the switch COPY function Connections of the Vital Force MKIII Rear and Top Panel CHARGER Plug the supplied plug p Input Plate The source should be Socket pack into here to charge placed here the unit do not use any other power adapter INPUT BNC Plug any external source q Output Chamber The source will be copied socket into here for convenience Small to the item placed in here OUTPUT Socket Plug an external probe into here for potentising objects that cannot fit into the canisters Output Chamber Large The source will be copied to the item placed in here use for large vials 5 Instructions for Copying substances oe mh Turn the power switch to the ON position Select the TIME LOG to the appropriate l
3. Vital Force MKIII user guide Introduction Thank you for purchasing the Vital Force MKIII Potentiser You have chosen a product that has been ergonomically designed whilst keeping functionality to a maximum The Vital Force MKIII has been researched and tested over many years in Australia and by international affiliates It represents the latest in innovations of Homeopathy combining modern technology and proven methods to bring you an effective reliable and powerful Potentiser Please read through this manual to familiarize yourself with the controls and functions to get the most out of your new equipment With proper care you will get many years of un compromised operation from the Vital Force MKIII Potentiser Index Parts included with your Vital Force MKIII package Setting up your Vital Force MKIII Charging the Vital Force MKIII Controls Indicators and connections Instructions for Copying substances Instructions for Potentising substances Using the Invert function NOMARON 1 Parts included with your Vital Force MKIII package Please check that all parts are included within the packaging a Vital Force MKIll b Lidx2 c Power Adapter charger 2 Setting up your Vital Force MKIII Carefully remove the Vital Force MKIII from its packaging Ensure the power switch is selected to the OFF CHARGE position c Turn on the power switch and the orange POWER ON LED will light if the orange POW
4. ength of time Ensure the POTENTISE INVERT switch is set to the POTENTISE setting See section 7 for invert function Set the MULTIPLIER dial to the COPY position Set the POTENCY x100 dial to the COPY position Note 1 Press the START button and leave all items in place until the RUNNING LED has turned off Note 1 With the MULTIPLIER and POTENCY x100 dials set to COPY the other dials will have no effect Instructions for Potentising substances a b c Turn the power switch to the ON position Select the TIME LOG to the appropriate length of time Ensure the POTENTISE INVERT switch is set to the POTENTISE setting See section 7 for invert function Set the MULTIPLIER dial to the appropriate position Set the POTENCY dials to indicate the appropriate position for the potency required in Units x1 10 s x10 and 100 s x100 Press the START button and leave all items in place until the RUNNING LED has turned off Using the INVERT function The INVERT function is simply to invert the substance To do this set the INVERT POTENTISE switch to the INVERT position Follow the other instructions as normal
Download Pdf Manuals
Related Search