Home

Low Value Clearing Service (Clearing Interconnector) User Guide

Contents

1. EPDD File D Dishonour Dishonour Refusal and Vi EPDE File E Dishonour Ack and Technicaly invalid EPDF File Dishonour Technically invalid AK DEGT Direct Entry Government Transaction Fries 1 pecs Direct Entry Government Summary File cer _ CECS Interchange Summary O O O 1 pesr rese Od Part B Files Sent to the LVCS by South Bank to be sent to North Bank the root or default destination EPDD Fle D Dishonour DishonourRefusaTand VR 1 EPDE File E Dishonour Ack and Technically invalid O O EPDF FleF Dishonour Technically Invalid Ack o G o DEGT Direct Entry Government Transaction File ood pecs Direct Entry Government Summary Hle id CEIS cECS Interchange Summary Report S EST Test Files o d Part C Activation of File Types Tick one of the options below Please activate all of the file types above at Date 20 Time am pm circle one will advise of activation date s separately Contact the Reserve Bank to discuss your requirements and to obtain an appropriate form Part D RITS Authorised Signatories Name please print
2. Once this has been completed the RBA and the new LVCS Participant will commence discussions on the exchange of confidential credential information connectivity to primary and secondary sites details of the default receiving destination if applicable and the scope of initial testing Participants will be able to commence the configuration of their file transfer applications once these discussions have taken place Once configured the new LVCS Participant will need to ensure that it can send the correct files to each LVCS file transfer application host IP and mailbox destination address Details of relevant host IP and mailbox addresses are provided by the RBA as part of the establishment process 6 2 Agree project plan with each existing LVCS Participant The new LVCS Participant should agree on a project plan with each existing LVCS Participant for the exchange of files using the service The plan would include contact details meeting arrangements likely timings agreed by the new user with each Exchange Partner and the RBA the list of files to be exchanged the file rule setup the file testing schedule and proposed weekend Production implementation arrangements July 2010 22 vy LVCS User Guide RITS Process for Establishing LVCS File Transfers 6 3 Set up of File Rules in Pre Production This table below outlines the administrative steps that new LVCS Participants as Clearing Participants are required to complete to enable
3. July 2010 36 vy LVCS User Guide RITS Sample LVCS Forms and Reports Participant File Transfer Details Report For South Bank with North Bank RBA Low Value Clearing Service Participant File Transfer Details Report vy South Bank via Courier With Clearing Participant North Bank via Courier North Agent Services Environment Pre Production This report is used by the Reserve Bank to confirm that the following details which have been entered into RITS for participation in the Low Value Clearing Service are complete and correct Part A Files Sent to the LVCS by South Bank to be sent to North Bank File Type File Type Description File Name Sent to LVCS EPDA Hie A electronic Presentment EDS Hie B Presentment Ack and Technicaly imaia EPDC ec Presentment Technicaly invalid Ak EDD Hie D Dishonour Dishonour Refusal and VIR EPDE Hie t Dishonour Ack and Technically wad EPDF Hier Dishonour Technically Invalid ACK O DEGT Direct Entry Government Transaction Fle DEGS Direct Entry Government Summary e Es _ CECS Interchange SummeryRepot fest restes LE Part B Files Sent
4. Participants who exchange collator and government agency banking files with the RBA via the LVCS must use the separate contingency arrangements which exist when normal file exchanges are unable to take place July 2010 8 v4 LVCS User Guide RITS Key Service Arrangements 3 KEY SERVI CE ARRANGEMENTS This section provides a summary of the service arrangements adopted by the RBA for the LVCS 3 1 Governance The legal underpinning for the provision of the LVCS is provided in the RITS Regulations and Conditions of Operation The RITS Regulations bind the RBA and each RITS Member to an enforceable contract For the LVCS the RITS Regulations set out the rights and responsibilities of each party using this service For other general information on governance please see RITS Low Value Feeder Project Overview of Governance Arrangements December 2009 available on the RITS Information Facility 3 2 Technical I nfrastructure The RBA has established RITS technical infrastructure for the LVCS which leverages off the RBA s significant public policy investment in RITS This technical infrastructure includes full redundancy of all systems and network connections at both primary and secondary sites and the mirroring of data between sites Where practicable failover from the failure of a single component is automated The RBA s network connections to COIN and SWIFT comprise dual links with physical and logical diversity to each RBA site The R
5. details identifying the Receiving Principal and the Sending Principal The RBA sends a similar form to the existing Clearing Participant to collect the necessary file transfer details for the new file exchanges 2 The new Clearing Participant or its Courier if relevant and the existing Clearing Participant or its Courier if relevant each complete their forms spreadsheet in the role of a Receiving Principal i e it will specify the Receiving File Name for the production files that it will receive from the other Participant and any non default destination file path address details this is explained in Section 2 11 Once completed the form will be returned via email to the RBA by each Participant or its Courier as applicable 3 The RBA locks the completed cells to prevent amendment and emails the form spreadsheet to the other Clearing Participant or Courier if applicable Each Clearing Participant or its Courier reviews the form from the perspective of the Sending Principal and advises if the sending file name will be the same as the listed receiving file name This is the expectation in most circumstances Each Sending Principal or its Courier returns the form to the RBA via email Note If the sending file name is to be different from the receiving file name the RBA will resend the form with an additional column for the Sending Principal or its Courier to fill in the Sending File Name This would then be re
6. e LVCS files are stored in an encrypted format and only retained for 7 calendar days to cover extended weekends e Strict user access arrangements are in place to restrict the ability to view or edit file content and e System controls prevent files from being inserted or updated during the file transfer process July 2010 9 v4 LVCS User Guide RITS Key Service Arrangements These and other RBA security measures are the subject of regular audits The RBA also complies with the industry security standards set out in APCA s COIN Operating Manual and with network security standards of SWIFT 3 4 Key Service Metrics 3 4 1 Service Availability Production file transfers over the LVCS can occur during normal clearing hours weekdays that are not national public holidays between 7 00 am and 1 00 am the next day and normal RBA Collator hours weekdays that are not national public holidays between 7 00 pm and 4 00 am the next day These times are Sydney times Supporting operational staff will be present during these hours Support for the Production Environment will not be available on weekends unless prior arrangements have been made with the RBA s LVCS Help Desk The Pre Production Environment will be supported by the RBA during normal business hours i e 9 00 am to 5 00 pm each business day The environment may be available for unsupported testing i e without LVCS Help Desk telephone support after hours and on weekends depending
7. environment Production and Pre Production Industry Test and for all LVCS files including those where RBA is the Exchange Partner SWIFT Participants will need to advise the RBA of their Distinguished Name s The above details are summarised in the table below Use RBA Distinguished Name DN Transfer Technical Request Mode Service Name Type Prod ou bulkp o rsbkau2s o swift Real Time rba bulkp rt pacs xxx cfe Prod ou bulkp o rsbkau2s o swift Store and rba bulkp sf pacs xxx cfe Forward Pre ou preprod ou bulkp o rsbkau2s o swift Real Time rba bulkp rt pu pacs xxx cfe Prod Pre ou preprod ou bulkp o rsbkau2s o swift Store and rba bulkp sf pu pacs xxx cfe Prod Forward July 2010 15 vy LVCS User Guide RITS SWIFT FileAct 4 2 SWIFT options when sending files Several options are available to participants when sending files via SWIFT FileAct using the above RBA CUGs e To elect to send files either in real time or store and forward mode e To elect whether or not to receive SWIFT delivery notifications e To elect whether or not to use the SWIFT non repudiation option Sending participants must assess the suitability of each option for their own purposes taking into account cost efficiency and any legal considerations SWIFT Exchange Partners may at their discretion populate the Filelnfo field in each file transfer request they send to the LVCS However the LVCS
8. Clearing Participant must arrange for the report to be signed by its RITS Authorised Signatories File transfers will not be able to commence without this authorisation from the Sending Principal and Receiving Principal A PDF of the signed report should then be sent by each Clearing Participant to the RBA via email The Participant File Details Report includes a section for the activation of all File Rules If participants know the intended date and time for the activation of their Production File Rules when the form is to be signed they can include this instruction in the relevant section of the form If this information is not known at the time of signing a separate File Rule Activation Form will be required see next section Once the above steps have occurred the LVCS static data entry verification and authorisation processes for set up in the Production Environment are complete However File Rules are still inactive The activation of File Rules is covered in the next section 6 7 Activation of File Rules in Production Clearing Participants must agree upon the activation date s of File Rules for their Production file exchanges The activation of all File Rules can occur at the same time or participants can advise of a different date time for each File Rule or group of File Rules The RBA will only activate a Production File Rule relating to a file transfer from one Clearing Participant to another Clearing Participant after it
9. File Transfer Details Form Step 2 as a Receiving Principal i e specify Production file names for all files to be received from the other Clearing Participant and email the completed form back to RBA Receive Participant File Transfer Details Form as completed by the other Step 3 Clearing Participant from the RBA Review the other Clearing Participant s completed form as a Sending Step 3 July 2010 29 vy LVCS User Guide Arrange as necessary the exchange of test files using Production systems on the implementation weekend Note that Production File Rules activated on the implementation weekend will remain active for the commencement of normal production file exchanges on Monday RITS New LVCS Participant Checklist ACTIVITY REFER TO COMPLETED SECTION STEP Receive a Participant File Details Report from the RBA which lists all File Step 5 Rules between you and the other Clearing Participant entered into the LVCS Carefully review the details in the Participant File Details Report If Step 6 known insert the agreed activation date Sign the report and email a PDF version to the RBA The report must be signed by your RITS Authorised Signatories Production Activate File Rules 6 7 If you and the other Clearing Participant have completed the same activation date and time on your Participant File Details Report the RBA will act on that instruction to activate the File Rules Otherwise agree up
10. Pre Shared Secrets please contact the RBA s Security Group See RBA contact details in Section 1 5 July 2010 18 vy LVCS User Guide RITS COIN 5 4 Allocated Network Address Spaces The RBA currently uses the Telstra allocated public network addressing RBA RBA RBA Telstra Telstra Firewalls Switches Routers Switches Routers Switches The network address spaces allocated by Telstra for the RBA to use can be obtained by contacting our Communications Group see Section 1 5 for contact details Separate address spaces have been allocated for the following purposes e For Host addressing at primary site e For Host addressing at secondary site e For IPSec termination at primary site e For IPSec termination at secondary site July 2010 19 v4 LVCS User Guide RITS COIN 5 5 RBA Host Environments IP Addressing The following are the RBA host environments for COIN file transfers Each row listed below has a separate IP address which can be obtained by contacting Communications Group see Section 1 5 for contact details Type RBA Location RBA Business Purpose Host IP Address Production Primary Site CS1 CS2 Participant Please Courier contact the Collator RBA for this Core Banker to Government information Production Secondary Site CS1 CS2 Participant Courier Collator Core Banker to Government Production Primary Site Low Value Clearing Service Low Value Settlement Service Production Secon
11. be used when the authorisation to activate File Rules did not occur as part of the authorisation provided on the Participant File Transfer Details Report In Production both Clearing Participants will need to authorise the activation or deactivation of individual File Types using the LVCS File Rule Activation Form shown below This form is available on the RITS Information Facility RITS Low Value Clearing Service File Rule Activation vcs Desk Reserve of Australia Fax 02 9551 8063 or ivcsheipdeskG rba gov au as a PDF email attachment Rules in the Low Value Clearing Service LVCS These detalis will be entered into RITS 1 File Transfers between these organisations in both directions full names of both p and Eee 2 Environment Pre Production Production 3 LVCS Rie Rule action required Activate Deactivate 4 What date and time should this occur 5 File Types Activate ali File Rules in both directons for All fle types g Electronic Presentment and Dishanaur Files Traremnission A B C D E and F Direct Entry Nama Files Transaction and Summary Direct Entry Govemrment Files Trareaction and Summary CECS interchange Summary Repot Other 1D D D ao Please Specify od 142 dol 10 This form is to authorise the activation or de activation of Fle 6 Signed by RITS Authorised Signatories on behalf of Organisaton name Signed by RITS Authorised
12. has received authorisation to do so from both Clearing Participants For the LVCS Production Environment this authority must be given by each Clearing Participant s RITS Authorised Signatories If the activation time is known when the parties are confirming file name details on the Participant File Details Report they can specify the activation time when they return that report to the RBA Alternatively they can request File Rule activation by July 2010 26 vy LVCS User Guide RITS Process for Establishing LVCS File Transfers using the separate LVCS File Rule Activation Form this form is available on the RITS Information Facility a sample is shown in Section 8 3 If the Clearing Participant is using a Courier for its file transfers the RBA will also check that the appointment of the Courier has occurred in accordance with Exhibit D of the RITS Regulations The RBA will confirm via an email to both participants and or Courier for the existing LVCS participant that it has scheduled the activation of the requested File Rule s at the specified time 6 8 Production Implementation The agreed date for the activation of File Rules in either or both directions is essentially the Production implementation date for file transfers Clearing Participants can agree if their implementation is to be staged using only a subset of File Types to begin with The RBA expects all Production activations to occur on a weekend from Saturday morning to av
13. if relevant each complete their forms spreadsheet in the role of a Receiving Principal i e it will specify the Receiving File Name for the test files that it will receive from the other Participant and any non default destination file path address details this is explained in Section 2 11 Once completed the form will be returned via email to the RBA by each Participant or its Courier as applicable 4 The RBA locks the completed cells to prevent amendment and emails the form spreadsheet to the other Clearing Participant or Courier if applicable Each Clearing Participant or its Courier reviews the form from the perspective of the Sending Principal and advises if the sending file name will be the same as the listed receiving file name This is the expectation in most circumstances Each Sending Principal or its Courier returns the form to the RBA via email Note If the sending file name is to be different from the receiving file name the RBA will resend the form with an additional column for the Sending Principal or its Courier to fill in the Sending File Name This would then be returned to the RBA via email 5 The RBA records the details of each individual file name listed in the form as a File Rule in the LVCS Pre Production Environment Each File Rule created will initially be set to a status of inactive July 2010 23 vy LVCS User Guide RITS Process for Establishing LVCS File Transfers St
14. site This address can be used by the RBA to send files if access to the primary site address is unavailable The RBA is able to automatically divert files to the secondary address after an agreed number of retry attempts This is discussed with each participant when connectivity is established July 2010 5 v4 LVCS User Guide RITS LVCS Overview The switching of SWIFT connectivity between primary and secondary sites by a SWIFT LVCS Participant is transparent to other SWIFT FileAct users as the same Distinguished Name is used 2 7 LVCS Environments The RBA has established a Production Environment and a Pre Production or Industry Test Environment for the LVCS These environments are differentiated by the use of different host IP addresses for LVCS COIN participants and different Technical Service Names for LVCS SWIFT FileAct participants In addition for SWIFT FileAct transfers the RBA uses different Distinguished Names in Pre Production and Production Static data entry and other LVCS Participant set up activities are completed separately for each environment LVCS Participants are expected to use different file names when testing files in the Pre Production Environment and transferring files in the Production Environment If the same file names are used identical File Rules would exist in both environments and participants will not be protected if a test file is accidentally sent to the Production Environment That test file if accid
15. BA s four COIN connections are all 2 Megabits per second links with support and service levels the highest available from Telstra The RBA s four SWIFT links are sized at 512 Kilobits per second Link capacity has been specified to meet both normal and peak loads LVCS technical infrastructure has been designed to provide the highest standards of availability resilience and reliability to LVCS Participants As part of its overall risk management framework the RBA has also developed business continuity arrangements to minimise the likelihood of operational disruptions This includes support and operational staff being based at both primary and secondary sites The RBA has successfully completed a range of initial failover and performance tests to ensure that its recovery procedures work as expected The Low Value Settlement Service LVSS will share the same technical infrastructure for settlement instruction and response file transfers as the LVCS 3 3 RITS Security Arrangements The new RITS technical infrastructure introduced for the LVCS and the future Low Value Settlement Service will adhere to the rigorous security arrangements for RITS These cover the protection of data and systems within the RBA access to the data and systems used by the RBA for file transfer processing and the protection of systems from external threats The RBA has put the following measures in place concerning security arrangements for files processed by the LVCS
16. Entry Government Summary DESR Direct Entry Settlement Report sent by RBA only Consumer Electronic Clearing System CECS CS3 CEIS CECS Interchange Summary Report National Collator files NCES National Collator Exchange Summary NCEA National Collator Error Advice NCPA National Collator Provisional Advice NCFA National Collator Final Advice NCNO National Collator Net Obligations Commonwealth Government Agency Banking files GAAB Government Agency Account Balances GASO Government Agency Settlement Obligations GAHV Government Agency High Value Payments GAPD Government Agency Pending Debits Test files TEST LVCS Participants may wish to set up a File Rule for a non specific file type in order to conduct initial connectivity testing using a file name that is not a production or normal test file name 2 6 File Processing Using Alternate Sites The LVCS is able to exchange files from the RBA s primary and secondary sites lt is also able to exchange files with the primary and secondary sites of each Exchange Partner LVCS Participants using the COIN are given the host IP address of the LVCS at the RBA s primary and secondary sites and can to configure their systems to use the secondary IP address if the primary IP address is not accessible after their chosen number of retry attempts Depending on their internal systems design LVCS Participants using the COIN can also advise the RBA of the host IP address at their secondary
17. File Receiver North Agent Services Files from Sending Principal South Bank via Courier File Sender Environment Pre Production Receiving Principal to complete Columns C and D For COIN Participants only type the file path if applicable into Column C File Path For example this may be a sub mailbox or a LAN address Excel will not allow you to type as the first character in a cell Use an apostrophe as the first character to indicate text For COIN and SWIFT Participants type the names that you wish incoming files to have into Column D File Name to be Received from LVCS Write NOT EXCHANGED for all file types not exchanged with this Clearing Participant File File Type Description File Path File Name to be Received from LVCS Type Completed by Receiving Principal if required Completed by Receiving Principal E File A Electronic Presentment E File B Presentment Ack and Technically Invalid E EPDD File D Dishonour Dishonour refusal and V R Du PDA PDB PDC ER ec DL CENE cala Peds Wee o EINE p pou July 2010 33 vy LVCS User Guide RITS Sample LVCS Forms and Reports Second Worksheet Completed by South Bank as Receiving Principal RBA Low Value Clearing Service Participant File Transfer Details Form Files to Receiving Principal South Bank via Courier File Receiver Files from Sending Principal North Bank via Courier File Sender North Agent Services Envi
18. RBA will closely monitor all file transfers Transfers will be marked as unsuccessful after the system has attempted to send the file s to each File Recipient including to nominated primary and secondary addresses as applicable The RBA will notify the File Sender via email telephone when a file s is unable to be delivered to a File Recipient The RBA undertakes to provide this notification as soon as possible and in any case within 30 minutes within normal clearing and Collator hours refer to Section 3 4 1 July 2010 11 v4 LVCS User Guide RITS Key Service Arrangements 3 5 LVCS Production Monitoring and Support 3 5 1 Production Monitoring The production operation of the LVCS will be closely monitored by RBA staff As noted in Section 3 4 1 operational staff will be present e between 7 00 am and 1 00 am the next day on weekdays that are not national public holidays this covers normal clearing file exchange hours and e between 7 00 pm and 4 00 am the next day on weekdays that are not national public holidays this covers normal Collator file exchange hours RBA technical support staff are also available during these hours to the ensure continuity of production operations 3 5 2 LVCS Help Desk Support The RBA has established a Help Desk contact telephone number for use by LVCS Participants This number is 1800 617 566 This number is available for use on a 24 hours by 7 days basis An email address has also been estab
19. RESERVE BANK I NFORMATI ON AND TRANSFER SYSTEM Low Value Clearing Service Clearing I nterconnector User Guide July 2010 vy LVCS User Guide RITS TABLE OF CONTENTS 1 INTRODUCTION nneseeeesesnunnununeununuumanauuu Ea aE aSa 1 1 1 Background to the Low Value Clearing Service s ssssssssssesssrurrsrsrrrrrnrerrrrrresrenns 1 1 2 What this User Guide Covers ii iss Lxx Rec rua ERE E LI AR RR I AIR ua XP P AEN a NER Rd n 1 1 3 Audience for this User GUJE sicud deseos edepol a aiae oe cea eti uiia 1 1 4 Obtaining Copies of this User Guide ss uites ibus ree eb ee rede began taie end 1 1 5 RBA COMAC crit abe Diui tian ssnaaithdunnn ytd oit a AO aO A dna Manse aA 2 2 LVCS OVERVIEW 5 iicsxssokd cuunsus epuadaudasus ca advan dtiedacensacivededenmedensanineeuddededsncaadnadusecn 3 2L ep az igerdierigiuccrc e ccek n ioea eet E es 3 2 2 COUNEIS ME DE D m E IT 3 2 3 Approved NGCWONKS a uvrsidibciad ane cito undae meetin aanbenenaamnadtnmedaavenated 4 2 4 Approved File Transfer PHOtOCO cse sei birir r iEn ep entren mor pibe ene Pt E e dett pa 4 2 5 Approved File TYPES erurman atiis tebuneuEtott niieutss 4 2 6 File Processing Using Xlternate SIEbBS x ccu rei be ebac tob sets a a e 5 2 7 LVCS EDVIFODImDES conii ra REPRISE TA P EDRRb xi Meehiahe dane IRE EARUM UEM NUN RM RUE URN 6 2 8 File Name Translatione ssemdade eos e oe bd p en Er RDADE A pda P Manned AME IPU MP REI MR UMS 6 2 9 File Processing and Fil
20. Receiver All times shown include network transit times of the sender and receiver and LVCS processing times e A mix of 250 clearing files transferred concurrently across COIN SWIFT in both directions simulating a peak exchange period e g daily 8 00 pm exchanges takes less than 45 minutes The mix of files contains varying file sizes ranging from small to very large 50MB e A mix of 1000 clearing files transferred concurrently across COIN SWIFT in both directions simulating a peak exchange day takes less than 120 minutes The mix of files contains varying file sizes ranging from small to very large 50MB July 2010 10 v4 LVCS User Guide RITS Key Service Arrangements e The average end to end transit times of files including COIN SWIFT network times from File Sender to File Recipient are 7 A clearing file of 100KB will take approximately 1 minute to transfer i A clearing file of 5MB will take approximately 10 minutes to transfer e A clearing file of 50MB will take approximately 30 minutes to transfer These times were measured during periods when no other file transfer activity was taking place Longer times may be experienced during periods where there is high network traffic These expected transmission times may be updated by the RBA from time to time 3 4 3 Target Failover Times As mentioned in Section 3 2 the RBA has established technical infrastructure at both its primary and secondary sites wit
21. S Overview e participant system changes This may require changes to the static data held in the LVCS e g a new IP address a changed mailbox or a different destination address and e file name changes This will require amendments to existing File Rules The RBA will process all change requests supported by appropriately signed documentation As a guide at least one week s notice for Production changes should be provided The LVCS Pre Production Environment is available to Participants for testing the types of changes listed above This environment is also available for the testing of new file exchanges between new or existing Clearing Participants Forms for change requests are available on the RITS Information Facility or on request from the LVCS Help Desk 2 13 Participant Contingency Arrangements LVCS Participants should note that if they or their Courier or another Clearing Participant or its Courier are unable to exchange clearing files on an end to end basis via the LVCS due to any form of contingency event they will need to exchange files using agreed industry fallback arrangements At present this requires the exchange of clearing files using secure PGP email All contingency clearing file exchanges are to occur directly between the relevant parties and will not involve the LVCS All LVCS Participants must therefore have processes in place to generate and directly exchange clearing files via the agreed contingency method
22. Signatories on behalf of Organisaton name July 2010 38 vq RITS 8 4 LVCS File Resend Authorisation Form LVCS User Guide Sample LVCS Forms and Reports This form allows participants to request the resend of a production file that the LVCS shows as successfully transferred to the File Recipient Please refer to Section 3 5 3 of this document for more information This form is available on the RITS Information Facility RITS Low Value Clearing Service File Re Send Authority To LVCS Help Desk Reserve Bank of Australia Fax 02 9551 8063 or ivcsheipdeskGrba gov au asa PDF emai attachment LVCS Helpdesk 1800 617 566 This form is to authorise the re sending of a fle previously sert ve the Low Value Clearing Service VCS This form amp Orly for fles that according i Reserve Bank records have dready been successfully exchanged Two copies of this fom must be signed by authored officers and sert 10 the RBA one copy by the Sending Cearng Participant and the offer by the Receiving Clearing Participant Sending and Recieving Clearing acknowledge that the RBA Is not required t act on the instructions of this form until it has received bofh copies The RBA assumes no responebility or liability for any loss ather direct or incidental in carrying out the fie re send instruction authorised by fhis form 1 gt Clearing Participant Name 2 Sending O or Receiving _ 3 gt Via Agent Courier Opt
23. ailable on the RITS Information Facility for this purpose a sample of this form is shown in Section 8 4 Both Clearing Participants that are party to the file exchange must fill in the form with details of the file to be resent The form must then be signed by RITS Authorised Signatories Please note that RITS Members may provide the RBA with a separate list of RITS Authorised Signatories for the purpose of authorising LVCS file resends The completed and signed form should be faxed or emailed as a pdf to the LVCS Help Desk the fax number and email address are indicated on the form Phone the LVCS Help Desk to advise when you have sent the form ii Unsuccessful transfers If a processing problem prevents the delivery of files from the LVCS to the File Recipient the LVCS will show the transmission as unsuccessful In this circumstance the RBA will verify with the File Recipient initially by telephone whether or not the files have been received If the File Recipient advises non receipt the LVCS Help Desk will send an email to the File Recipient s nominated operational contact which may be a group email address This email will e Seek confirmation that the relevant files as listed in the email have not been received and e request authorisation to re commence the file transfer process Once the RBA receives the authorising return email from the File Recipient the files will then be sent The RBA will contact the File Recipient by telephone t
24. ce The Reserve Bank provides a Low Value Clearing Service the Clearing Interconnector or LVCS to facilitate file transfers between Clearing Participants using SWIFT FileAct and Clearing Participants using the COIN Clearing Participants may also use the Low Value Clearing Service as a central point for the exchange of clearing related files with all other participants 1 2 What this User Guide Covers This user guide provides information on the LVCS and includes details on the operation of the service as well as the administrative arrangements in place for the use of the service This includes the set up of new LVCS Participants and the activation of file transfers with Exchange Partners Please refer to the Glossary at the rear of this document for defined terms which are capitalised in this user guide 1 3 Audience for this User Guide This user guide is provided for RITS Members who use or who wish to use the LVCS This includes all direct participants in the various payments clearing systems that exchange Approved File Types New users of the LVCS may include e existing members of the low value payments clearing system s who wish to change their level of participation so that they can directly exchange files with other Clearing Participants e new low value payments clearing system entrants These entrants may wish to use the LVCS to establish file exchange capability with existing Clearing Participants e existing Clearing Pa
25. dary Site Low Value Clearing Service Low Value Settlement Service Test Primary Site CS1 CS2 Participant Courier Collator Core Banker to Government Test Secondary Site CS1 CS2 Participant Courier Collator Core Banker to Government Industry Test Primary Site Low Value Clearing Service Pre Production Low Value Settlement Service Industry Test Secondary Site Low Value Clearing Service Pre Production Low Value Settlement Service If required the RBA can assist participants to determine which RBA primary and secondary Host IP addresses should be used for particular file exchanges 5 6 File Transfer Protocol The RBA supports the industry decision to use Connect Direct over IP CD IP as the default file transfer protocol for COIN file exchanges All files sent to the LVCS via Connect Direct should be sent in text mode rather than binary mode July 2010 20 v4 LVCS User Guide RITS COIN Partners wishing to commence discussions on the setup and configuration of Connect Direct can contact our Network Support Group refer to section 1 5 for contact details Partners wishing to discuss the use of an alternative file transfer protocol should call the RBA s business enquiries contact refer to section 1 5 for contact details 5 7 COIN Monitoring The RBA requests that organisations connecting over the COIN to the RBA provide two Host IP addresses per active site or environment for network monitor
26. e Name Matching sessessssssmIme 6 2 10 Distinguishing File Transfers File Sender to LVCS sssssseeseeee en 7 2 11 Distinguishing File Transfers LVCS to File Recipient c eceeee eee ee ences eee 7 2 12 Variations to Static Data Existing LVCS Participants ccccececeee eee eee eee eee 7 2 13 Participant Contingency Arrangements oos oiii aanuiemsRnsnieeinasean dale 8 3 KEY SERVICE ARRANGEMENTS ccccsceeesceeuseeeeseeeuseeeeeeeeuaeeouaeeeusseauseuauseeausgeansgeags 9 3 1 GOW CMa CE m EU 9 3 2 Technical lnfrastete EUEG a acreage xciqirituadosop pisa D notante ecce noil a Ange dra nea 9 3 9 RITS Security Arrangemiellks s cuxcdenuosvasen Debaet exitus ede OMNE losin Deui dn TEAM ORG RR 9 3 4 Key Service MetriCS ser rc T ms 10 ZAL Service Avallabllity uiii oo dpan ae a aeaa 10 3 4 2 File Transmission TIME Sisera EE EAS 10 34 3 Target Falover TIME Sasrirries akiri ENA a EAS 11 3 4 4 Notification of File Processing FailureS essssssssssssrrsrssssrrsrererrrrrsrerrrnnseerns 11 3 5 LVCS Production Monitoring and SUppDbOLE inccr reet en pn prt nee ipd Rene ds 12 3 51 BProductiomdMOBIUOE I esit eee cup uen etu atte teer mex tor erret cree merece terre eee ere nee 12 3 5 2 WCS Help Desk SUpport cete iestutex ueste bles ttes A taie Redi iake ai 12 ESOS FERESE PEE S DL o L1 m 13 July 2010 ii vy LVCS User Guide RITS 3 5 4 Other Support for the SONICS ic icis iaiia eateclendera
27. eesse 22 6 3 Set up of File Rules in Pre Prodtctiofis s ice reci resnem E n RA nE Rad 23 6 4 Activation of File Rules in Pre Production lsssssssssssem mmn 24 6 5 Testing of File Exchanges iiec eet xe tide AEE EY A DIERer DER RM GER C Dd 24 6 6 Set up of File Rules in PRODUCTION issus oes ru E DIDI Rea EE iN ERR AE PIRE EEIMEES 25 6 7 Activation of File Rules invProduchlOMmareccts cede iaaa a ANE 26 6 8 Production IrmplemieritatiQEi iocus odo etae e n A n A 27 7 NEW LVCS PARTI CI PANT CHECKLIST ccccceesceeeeceeeeeeeeeeeeeeeeeeeseeeaseeuseeauseeaesseans 28 8 SAMPLE LVCS FORMS AND REPORTS ccccesceeeeeeeuseeeeeeeseeeeeeeeuaeeaueeeaeseuauseeenseeans 31 8 1 Participant File Transfer DetallsFOFPb eiectus aaa ne bas E eb ee o ERA MEAE Rad Es 31 8 2 Participant File Transfer Details REDON ies ctio incole cerent esas het iter eed 35 8 3 LVCS File Rule Activation FOFPIYI 2 oeste rice tec eben reb Russea a aldea RE idaan 38 8 4 LVCS File Resend Authorisation Forme ee mee ea he Pane dA HERR aana 39 9 GLOSSARY iisisnese sn spuosEAMRRARAE ARUM RERN NNNM NU RUE NE NRARESU ANNE RMA NU KA aE 40 July 2010 iii v4 LVCS User Guide RITS I ntroduction 1 I NTRODUCTI ON 1 1 Background to the Low Value Clearing Service In 2010 2011 the Australian payments industry will migrate from the bilateral links used for the clearing of payments to an industry Community of Interest Network COIN or to SWIFT using the SWIFT FileAct servi
28. entally sent to the LVCS Production Environment would be processed and sent on to the recipient s Production COIN or SWIFT FileAct destination address The Pre Production Environment is available for use by new and existing LVCS Participants for any type of file transfer testing that is required 2 8 File Name Translation The LVCS has file name translation capability The name that a file has when it is sent to the File Recipient by the LVCS can be different from the name that the file had when the File Sender delivered it to the LVCS This capability has been designed to facilitate a move from proprietary file names to an industry clearing file name standard a version of which has been proposed by the RBA in the document Payments Network Connectivity Partner Migration Information Paper dated December 2009 It can also be used to translate between proprietary file names if required However in considering whether or not to use the file name translation capability participants should note that if a file name is translated it will not share a common file name with its Exchange Partner This may impact on the ability of operational staff to troubleshoot any file processing difficulties as the names seen by each participant will be different There are also implications if fallback to industry agreed contingency arrangements is required The use of file name translation also needs to be considered in the context of future same day settlement o
29. ents such as a date If this is the case and the File Sender delivers the file to the LVCS with the name required by the File Recipient i e no file name translation is required the File Rule will use this same fully resolved file name File Recipients who wish to use file names that have a variable component may do so However this will require the agreement of the File Sender as file name translation capability is not available in this circumstance File Recipients should contact the RBA for further information on the additional steps required in this circumstance The LVCS will process files as it receives them in accordance with the File Rules that have been configured in the system The LVCS will not check for duplicate files if it receives them from a File Sender nor will the existence of duplicate files be specifically monitored Responsibility for ensuring that duplicate files are not sent and received will rest with Sending and Receiving Principals or their appointed Couriers as is currently the case Section 6 provides more information on the role of static data in the file transfer and set up process 2 10 Distinguishing File Transfers File Sender to LVCS Each Exchange Partner using the COIN delivers files to the LVCS into a destination nominated by the RBA called a mailbox The RBA will supply details of each mailbox and its credentials when commencing the process of establishing LVCS COIN connectivity If a File Sender acts f
30. ep Description 6 The RBA prints and sends a LVCS Pre Production Environment Participant File Details Report to each Clearing Participant or its Courier for verification This report shows the name of the Clearing Participant the name of the Clearing Participant s Courier if used the name of the other Clearing Participant the name of the other Clearing Participant s Courier if used the environment LVCS Pre Production Part A as a File Sender o the File Type and File Type description and o the sending file name or match expression incorporating wild cards if the file name has variable components e Part B asa File Recipient o the File Type and File Type description o the receiving file name and o the nominated non default destination address details if applicable 7 Each Clearing Participant checks that all details in its LVCS Pre Production Environment Participant File Details Report are correct The RBA should be contacted if any of the details are incorrect The RBA will re issue the report if any changes are required For the LVCS Pre Production Environment each Clearing Participant can confirm to the RBA via an email to the LVCS Help Desk Ilvcshelpdesk rba gov au that the details are correct The section on the report for activation date is not used in Pre Production Once the above steps have been completed the LVCS static data entry verification and authorisation proce
31. ernment direct entry payments including transaction files that contain return refusal reversal items and direct entry settlement reports sent by the RBA only e Consumer Electronic Clearing System CECS interchange settlement reports note the LVCS cannot be used for ATM EFTPOS transaction approval messaging e Collator and Commonwealth Government Agency banking files exchanged with the RBA only The use of File Types allows the RBA to perform LVCS administration A list of approved File Types is provided below The RBA will consider requests to add other types of payments clearing file transfers as required LVCS Participants will be advised of any changes to this list File Type Description Australian Paper Clearing System APCS CS1 EPDA File A Electronic Presentment EPDB File B Presentment Acknowledgement and Technically Invalid EPDC File C Presentment Technically Invalid Acknowledgement EPDD File D Dishonour Dishonour Refusal and Voucher Required EPDE File E Dishonour Acknowledgement and Technically Invalid EPDF File F Dishonour Technically Invalid Acknowledgement July 2010 v4 LVCS User Guide RITS LVCS Overview File Type Description Bulk Electronic Clearing System BECS CS2 DENT Direct Entry Normal Transaction DENS Direct Entry Normal Summary DEGT Direct Entry Government Transaction DEGS Direct
32. f low value clearing files The sender of a clearing file will create and send a settlement instruction to the RBA and a reference field in the settlement instruction will include the name of the file as it was when sent by the sender Following settlement the RBA will send a settlement response to the two RITS counterparties which will include a file name reference field to assist with reconciliation If the recipient s file name has been translated by the LVCS the file name contained in the settlement response will not be the same as the name of the file received from the LVCS The file name translation capability is not intended to replace current clearing file names but may be used in the future to assist the industry to adopt a common file naming standard 2 9 File Processing and File Name Matching When receiving files the LVCS uses the File Sender s identity and the file name to determine which File Rule to apply The File Rule specifies how to deliver the file to the File Recipient and whether or July 2010 6 v4 LVCS User Guide RITS LVCS Overview not file name translation is required The File Rule is created from static data provided by each Clearing Participant This static data therefore forms part of the instruction that the LVCS will act upon Normal industry practice is for the File Recipient to nominate the file name it wishes to receive The file name required is usually a fully resolved name i e it has no variable compon
33. file transfer testing to occur with existing LVCS Participants in the Pre Production Environment The RBA may vary some steps in this process following discussion with relevant parties Examples of the forms mentioned are provided in Section 8 Step Description 1 The prospective Clearing Participant contacts the RBA to advise that it wishes to transfer files via the LVCS with an existing Clearing Participant The RBA confirms the scope of the proposed arrangement including whether the new Clearing Participant will use or act as a Courier Where the prospective Clearing Participant plans to use a Courier the RBA will confirm which party will be completing the various administrative tasks listed below The RBA will also advise the Clearing Participant that the appointment of the Courier must be authorised using the form of authority set out in Exhibit D of the RITS Regulations The RBA also requests contact details for all parties 2 The RBA emails a Participant File Transfer Details Form an Excel spreadsheet to the new Clearing Participant or to its Courier if requested This form will be pre populated with details identifying the Receiving Principal and the Sending Principal The RBA sends a similar form to the existing Clearing Participant to collect the necessary file transfer details for the new file exchanges 3 The new Clearing Participant or its Courier if relevant and the existing Clearing Participant or its Courier
34. g Participant does not use a Courier the files will be delivered by the LVCS directly to the Clearing Participant The Exchange Partner that delivers a file to the LVCS The File Sender may send file transfers for itself i e as a Clearing Participant and or as a Courier i e on behalf of another Clearing Participant The Clearing Participant whose file is delivered to the LVCS i e the ultimate source If the Clearing Participant uses a Courier the files will be delivered by the Clearing Participant to its Courier and then sent to the LVCS If the Clearing Participant does not use a Courier the files will be delivered by the Clearing Participant directly to the LVCS 41
35. g Principal then confirms whether or not it will deliver the files with the same file names as nominated by the Receiving Principal If the file names are going to be different from those advised by the Receiving Principal the RBA should be contacted to amend the form to allow details of the sending file names to be exchanged The spreadsheet has two or more worksheets instructions for completion and e one or more worksheets for data collection These worksheets contain details of the Sending Principal and Receiving Principal and their Couriers if used that are completed by the RBA Each worksheet contains a table of all approved File Types with spaces for the Receiving Principal to type in the receiving file name and file path destination address as required Separate data collection spreadsheets must be completed for each combination of Sending and Receiving Principal Each participant will receive two forms one as the Receiving Principal to nominate the file names it wishes to receive and the second as the Sending Principal to confirm the file names it will send The second version of the form will be sent by the RBA to the Sending Principal after completion by the Receiving Principal The worked example shown on the following pages is for BECS file transfers between North Bank and South Bank July 2010 31 vy LVCS User Guide RITS Sample LVCS Forms and Reports Instructions on First Worksheet of Form RBA Low Value Clea
36. h data mirrored between sites in real time If a full failover to the RBA s alternate site is required the overall target recovery time is 40 minutes This can be broken down as follows e LVCS file management systems 40 minutes This is to re establish file transfers using applications and components running from the alternate site e COIN no downtime is expected in respect to the availability of the COIN The RBA has two connections to the COIN at both sites which are active at all times However File Senders should note that they will need to deliver files to the RBA s alternate host IP address if the primary host is unavailable e SWIFT FileAct 40 minutes This is to re establish SWIFT FileAct connectivity using a SWIFT Alliance Gateway SAG at the alternate site This can be done concurrently with the re establishment of LVCS file management systems 3 4 4 Notification of File Processing Failures An LVCS File Sender will generally know from its own systems whether or not a file was successfully delivered to the LVCS for subsequent delivery to the File Recipient This can occur through the use of Connect Direct monitoring for COIN transfers and though SWIFT using either real time mode or by selecting the delivery notification option for store and forward file transfers However File Senders will generally not know if the file has been successfully delivered by the LVCS to the File Recipient As part of its LVCS processes the
37. he LVCS will add a PDE indicator in subsequent automated transfer attempts 4 5 Closed User Group enrolment Each prospective SWIFT FileAct participant will need to apply to join the relevant CUG s The selection of which CUG s to join will be based on the participants requirements and can be discussed with the LVCS Help Desk July 2010 16 vy LVCS User Guide RITS SWIFT FileAct The application enrolment process is via a SWIFT e order using www swift com Once a request to join a CUG has been submitted SWIFT will send the enrolment application to the RBA as Administrator of each CUG for approval The RBA will contact the SWIFT applicant to advise the estimated completion time and availability date The RBA recommends that applications to enrol in a CUG be completed around one month before the participant s readiness date July 2010 17 v4 LVCS User Guide RITS COIN 5 COI N This section outlines arrangements for participants exchanging files via the LVCS using the COIN 5 1 Participant s COIN Connection Each COIN LVCS Participant must determine its own requirements for connection to the COIN and complete the necessary contractual arrangements with Telstra This process will encompass all design considerations such as number of links speed and other proprietary configuration requirements In addition to the link installation process file management systems and back end applications will need to be readied to facilitate file t
38. he Pre Production Environment will not be monitored as closely as the Production Environment However the LVCS Help Desk will specifically monitor initial connectivity testing to the LVCS and initial end to end testing between the Exchange Partners The LVCS Help Desk will also monitor test file exchanges when specifically requested to do so by Participants If a File Recipient or a Receiving Principal does not receive an expected file it should initially contact the File Sender to confirm whether or not it has been sent If the File Sender confirms July 2010 12 v4 LVCS User Guide RITS Key Service Arrangements that the file has been delivered to the LVCS the File Recipient should then contact the LVCS Help Desk File Senders and File Recipients should contact the LVCS Help Desk if they become aware of a problem affecting their ability to send and receive files over the LVCS and the duration of the problem is expected to be greater than 30 minutes 3 5 3 File Resends i Successful Transfers In general the RBA will not resend any LVCS file transfer that has been successfully delivered to the File Recipient If the File Recipient requires the file to be resent for any reason it must contact the original File Sender and request that it resend the file In limited circumstances the RBA will resend a successful file if written authorisation is received from both the File Sender and File Recipient A File Re Send Authorisation Form is av
39. iles to and receive files from other Clearing Participants The term Courier is used generally in this document to refer to a processing agent appointed by a Clearing Participant A Courier does not need to be a Clearing Participant RITS Members should note that the terms Agent and Agency Arrangement are used in the RITS Regulations and Conditions of Operation to refer to the Courier and arrangements made with the Courier The party with which files are exchanged The Exchange Partner may be a Clearing Participant who may also act as Courier for other Clearing Participants or a Courier A combination of the File Sender and file name that the LVCS uses to uniquely identify and process an incoming file The File Rule specifies who the file should be delivered to and how it should be transferred The File Rule may or may not be identical to the file name The Exchange Partner that receives a file from the LVCS The File Recipient may receive file transfers for itself i e as a Clearing Participant and or as a Courier i e on behalf of another Clearing Participant 40 vy RITS Receiving Principal File Sender Sending Principal July 2010 LVCS User Guide Glossary The Clearing Participant who receives a file delivered by the LVCS i e the ultimate destination If the Clearing Participant uses a Courier the files will be delivered by the LVCS to the Courier to be sent to the Clearing Participant If the Clearin
40. ing purposes Typically these addresses are loopback or virtual addresses that exist on the host side of the IPSec tunnel The RBA will then use these hosts for ping monitoring from our internal Enterprise Management System EMS via the RBA s Head Office and Business Resumption sites The RBA can similarly provide loopback addresses for this purpose on the host network side of the RBA Managed COIN Routers These are not listed in this document but are available on request by contacting the RBA s Communications Infrastructure staff See RBA contact details in Section 1 5 July 2010 21 vy LVCS User Guide RITS Process for Establishing LVCS File Transfers 6 PROCESS FOR ESTABLISHING LVCS FILE TRANSFERS This section outlines the establishment processes required to use the LVCS for file transfers 6 1 Establish connectivity 6 1 1 SWIFT As described in Section 4 SWIFT LVCS Participants must join the relevant SWIFT FileAct service CUG Closed User Group and configure their internal systems to send and receive files via the LVCS Once this has been completed the LVCS Participant and the RBA will conduct initial file transfer tests to confirm the correct use of the relevant FileAct service request type and transfer mode 6 1 2 COIN As described in Section 5 1 COIN LVCS participants must join the COIN and establish connectivity to the RBA This includes the exchange of Pre Shared Secrets and establishment of the IPSEC tunnel
41. ional only to be filed in if an Agent exchanges files on behalf of the that filis h this 4 rm 5 Name of File to be re sentby LVCS Po 6 md msan Date file was originally sent pou mm LVCS File Re send RITS Authorised Signatories Authorised by July 2010 39 vy RITS 9 GLOSSARY LVCS User Guide Glossary The following terms are used in this document Approved File Type LVCS Participant Clearing Participant Courier Exchange Partner File Rule File Recipient July 2010 A file type that has been approved by the RBA to be transferred via the LVCS Refer to Section 2 5 for more detail A party that uses the LVCS This can be any of the following parties e a Clearing Participant that transfers files directly to and from the LVCS e a Clearing Participant that uses a Courier to transfers files to and from the LVCS e a Clearing Participant that acts as a Courier for another Clearing Participant or e a Courier A member of a clearing system approved by the RBA for the LVCS that exchanges clearing files with other members by itself or via a Courier In APCA s APCS and BECS it is a Tier 1 member This term will also encompass a party that is not a Tier 1 member of APCS BECS or a settling member of CECS but is otherwise eligible to exchange files related to payments activity with other Clearing Participants A third party appointed by a Clearing Participant to send f
42. lished specifically for the service The email address is Ivcshelpdesk rba gov au The RBA will monitor all file transfers sent and received by the LVCS The nature and extent of the RBA s Production Environment monitoring is as follows e The RBA will monitor actual file transfers to ensure their success The RBA will not specifically monitor expected file transfers e Incoming files will be matched in the LVCS against a File Rule specific to the File Sender Files which match a File Rule will be accepted and delivered to the File Recipient The File Sender will be contacted by RBA staff if a file is received that does not match a pre defined File Rule or matches to an inactive File Rule e The RBA will attempt to deliver the file to the File Recipient using its nominated destination address details This will include a pre configured number of retry attempts and the use of a secondary destination if this has been supplied COIN only If files are unable to be delivered the RBA will contact the File Recipient to determine the cause of the problem The RBA will contact the File Sender if the problem is unlikely to be resolved within a 30 minute timeframe e The RBA will not monitor for files that may be sent more than once by the File Sender All files that match a File Rule will be accepted and delivered to the File Recipient e The RBA will regularly monitor the status of its LVCS systems and the networks it uses for LVCS processing T
43. ly 2010 24 vy LVCS User Guide RITS Process for Establishing LVCS File Transfers LVCS testing is expected to include end to end file transfer tests including failover testing COIN participants are also expected to send their files to both primary and secondary LVCS host IP addresses during this partner testing Testing of COIN file transfers from the LVCS to a participant s primary and secondary sites is also expected to occur and the timing of these tests will need to be jointly agreed Participants are requested to advise the RBA of their expected testing periods and to keep the RBA informed if these dates change 6 6 Set up of File Rules in Production This section outlines the administrative steps for the set up of File Rules in the LVCS Production Environment These steps are essentially the same as those used for the LVCS Pre Production Environment as outlined in Section 6 3 but with the additional requirement of formal authorisation by RITS Authorised Signatories The differences between Production and Pre Production steps are shown in red italics It is anticipated that the two Clearing Participants will have discussed and agreed upon Production file names and other arrangements prior to the commencement of this process Step Description 1 The RBA emails a Participant File Transfer Details Form an Excel spreadsheet to the new Clearing Participant or to its Courier if requested This form will be pre populated with
44. nnectivity COIN users only 5 6 1 2 Join Telstra COIN Establish network communications with RBA Exchange information with RBA concerning file transfer application configuration details Configure systems to allow test files to be exchanged with the LVCS Pre Production Environment Send a test file to each test RBA LVCS Host IP address and for Couriers to each mailbox directory advised by the RBA Agree Project Plan with other participant 6 2 Pre Production Set up of File Rules 6 3 Contact the RBA to advise that you wish to commence the process of Step 1 testing file transfers with an existing LVCS participant Advise the RBA of the scope and details of the proposed arrangement Step 1 Advise contact details Step 1 If a Courier is being used commence process to formally appoint Courier Step 1 as per Exhibit D of the RITS Regulations Receive Participant File Transfer Details Form from the RBA Step 2 Enter test file names into the Participant File Transfer Details Form as a Step 3 Receiving Principal i e specify test file names for all files to be received from the other Clearing Participant and email the completed form back to RBA July 2010 28 vy LVCS User Guide Principal This involves checking that the Production file names listed are the same as the file names you will send to the other Participant Return the form to the RBA RITS New LVCS Participant Checkli
45. ns of Operation have been amended to include the ability for Clearing Participants to appoint agents The form of authorisation required is set out in Exhibit D of the RITS Regulations The RBA usually deals with the agent of a Clearing Participant on operational and administrative matters associated with file transfers across the LVCS However each Clearing Participant remains responsible for providing authorisation to the RBA for the set up of Production file names and the activation of Production File Rules in the LVCS July 2010 3 vy RITS LVCS User Guide LVCS Overview 2 3 Approved Networks The RBA has approved the use of the Telstra COIN and SWIFT using FileAct for the LVCS 2 4 Approved File Transfer Protocol The LVCS uses the Connect Direct file transfer protocol for all file exchanges over the COIN Participants wishing to use a different file transfer protocol for COIN file transfers should contact the RBA to discuss their service needs The LVCS uses the FileAct file transfer protocol for all file exchanges over SWIFT 2 5 Approved File Types The LVCS accepts the following types of file transfers e Australian Paper Clearing System APCS all Electronic Presentment amp Dishonour EP amp D related files including presentments dishonours dishonour refusals technically invalid dishonours and all acknowledgements e Bulk Electronic Clearing System BECS transaction and summary files for normal and gov
46. nts Settlements PS Business Enquiries Senior Manager Planning amp Client Relations 02 9551 8941 Communications Infrastructure Enquiries Manager Communications 02 9551 9536 File Transfer Protocol Enquiries Manager Network Services 02 9551 9450 Security Enquiries Manager Security Analysis including exchange of COIN Pre Shared 02 9551 9427 Secrets Once LVCS file transfer arrangements have been established RITS Members should contact the LVCS Help Desk for all enquiries July 2010 2 v4 LVCS User Guide RITS LVCS Overview 2 LVCS OVERVI EW This section provides new users with an overview of the LVCS and how it operates The diagram below illustrates potential LVCS file flows LVCS FILE FLOWS Participant 1 Participant 2 Participant 3 Participant 4 ED Cleari i 3 iig Clearing E Reserve Bank of Australia 2 1 Eligible Participants The LVCS is available to all direct Clearing Participants eligible to exchange files related to payments clearing activity in Australia The RITS Regulations and Conditions of Operation incorporate this service All Clearing Participants who use the LVCS must be RITS Members 2 2 Couriers The LVCS also accepts files from and delivers files to third party agents or Couriers in this user guide who have been authorised by Clearing Participants to send and receive clearing files on their behalf The RITS Regulations and Conditio
47. o confirm that the files have been successfully received 3 5 4 Other Support for the Service The RBA will also support the operation of the LVCS by e responding to telephone or email queries from participants in relation to all aspects of the service e providing an immediate response to nominated staff regarding requests relating to the processing status of a file transfer e providing advice and assistance in respect to adding amending or deleting File Rules and activating or deactivating a File Rule July 2010 13 v4 LVCS User Guide RITS Key Service Arrangements e assisting participants with the testing of file transfers using the Pre Production Environment and e maintaining contact lists for each LVCS Participant including name phone and email details As is the case now with RITS the RBA will keep participants informed via email and SMS if a problem occurs which affects LVCS file transfer processing This will include the provision of regular updates Conference calls may also be co ordinated as required These information flows will be facilitated by the RBA s RITS Communication Facility July 2010 14 vy LVCS User Guide RITS SWIFT FileAct 4 SWIFT FILEACT This section outlines arrangements for participants exchanging files via the LVCS using the SWIFT FileAct Service Prospective SWIFT Participants should note the details provided in this section cover all file exchanges over the LVCS including file exchange
48. oid the risk of Friday s Production exchanges being affected It is expected that Exchange Partners will wish to exchange a small number of test files across the Production environment on the implementation weekend to verify their systems and links This can occur after the activation of agreed File Rules on the LVCS Exchange Partners may use their ongoing Production File Rules for this type of testing Alternatively Exchange Partners may request the RBA to setup and activate special TEST File Rules to allow these tests to occur and to deactivate these File Rules once the tests are completed All requests for activation and deactivation of Production File Rules must be made by both Clearing Participants in writing using the LVCS File Rule Activation Form Participants must take great care when performing test file transfers that use Production infrastructure and addresses July 2010 27 vy LVCS User Guide RITS New LVCS Participant Checklist 7 NEW LVCS PARTICIPANT CHECKLIST The following checklist provides a summary of the tasks that need to be undertaken by new LVCS Participants ACTIVITY REFER TO COMPLETED SECTION STEP Establish Network connectivity SWIFT users only 4 6 1 1 Join relevant SWIFT FileAct service CUG Configure systems to allow test files to be exchanged with the LVCS Send a test file to the LVCS using the correct SWIFT FileAct service and request type pacs xxx cfe Establish Network co
49. on RBA schedules for maintenance and failover verification Participants wishing to conduct any weekend testing must contact the LVCS Help Desk as early as possible at least two weeks notice to confirm whether the environment will be available Although the RBA will try and make the Pre Production Environment available this cannot be guaranteed for any particular weekend 3 4 2 File Transmission Times As with other RITS infrastructure the LVCS has been designed to ensure the highest standards of availability and reliability The capacity of the system has been specified to meet both normal and peak loads The RBA s network and system components are scalable to cater for extra capacity requirements if these emerge The RBA performs extensive LVCS testing This testing simulates a representative mix of clearing files being transferred between File Senders and File Receivers via the service using both the COIN and SWIFT FileAct On the basis of this testing with conservative estimates of file sizes and peak loads the following are indicative throughput and transit times that LVCS Participants can expect when transferring files via the service These times should be taken as a guide only as actual transmission times will vary depending on the number and size of concurrent files being sent and received by different participants at once The times indicated may also vary significantly depending on the network link sizes of each File Sender and File
50. on the activation date and time with the other Participant and complete the LVCS File Rule Activation Form Sign the form and email a PDF version to the RBA The form must be signed by your RITS Authorised Signatories If a Courier is being used ensure that it has been formally appointed in accordance with Exhibit D of the RITS Regulations The RBA will schedule activation of the File Rules at the specified date and time and confirm to both Clearing Participants and or their Couriers as applicable that this has been done Production Cutover 6 8 July 2010 30 vy LVCS User Guide RITS Sample LVCS Forms and Reports 8 SAMPLE LVCS FORMS AND REPORTS This section provides indicative samples of the forms that will be used for static data collection and validation for authorisation of File Rule activation and for requesting a resend of a file Participants should note that the format of these forms may change from time to time and that the latest forms can be requested from the LVCS Help Desk 8 1 Participant File Transfer Details Form The Participant File Transfer Details Form is an Excel spreadsheet partly pre filled by the RBA Each Receiving Principal completes details of the receiving file names it requires by File Type from the other Clearing Participant COIN participants may also complete specific destination address details If they are different from their default destination address refer to Section 2 11 The Sendin
51. or more than one party separate mailbox address paths will be advised This is to allow the LVCS to separately identify each Sending Principal 2 11 Distinguishing File Transfers LVCS to File Recipient The File Recipient s COIN receiving destination directory if applicable can be a nominated default location for all files which the Exchange Partner will setup as part of establishment of COIN connectivity or separate paths can be nominated for different files For example a File Recipient can specify one destination for BECS files and another for APCS files An Exchange Partner that is a Courier may wish to specify different destination directories for different Receiving Principals File path details if required will be collected by the RBA on the Participant File Transfer Details Form see Section 6 2 12 Variations to Static Data Existing LVCS Participants When a new LVCS Participant is established existing counterpart LVCS Participants will need to add to the LVCS static data recorded by the RBA in the LVCS to include file names for their exchanges with the new Participant The standard collection form and confirmation report will be used for this purpose Other circumstances in which an existing LVCS Participant may need to change its static data include e joining or resigning from a clearing system that has file exchanges This will require the addition or removal of File Types July 2010 7 v4 LVCS User Guide RITS LVC
52. ransfers using Connect Direct over IP via the COIN Once a new LVCS participant has completed its internal readiness for COIN file exchanges and is ready to establish file exchanges with one or more existing LVCS participants it should contact the RBA to commence the LVCS connection and setup process 5 2 RBA COIN Connection The RBA has dedicated COIN infrastructure with Telstra Fully Redundant Ethernet services operating at 2 Megabits per second Mbps into its two Data Centres Telstra provides two managed routers at each site total of 4 across the 2 sites These links are connected into fully redundant RBA managed consolidation routers for the purposes IP Security IPSec termination These routers then in turn connect to Firewalls which provide the isolation between internal systems and external connectivity The following configuration is used e Static routes e IPSec without the use of GRE tunnels e HMAC SHA 1 for the Encapsulation Security Payload and e 256 bit AES data encryption The RBA operates an active active configuration with both the primary and secondary sites running active operational environments 5 3 Exchange of Pre Shared Secrets In accordance with the industry agreed COIN Operating Manual the RBA requires the establishment of a Pre Shared Secret PSS via the secure exchange of 16 character strings between each partner to form the complete 32 character 256 bit PSS For further information on the exchange of
53. ring Service Participant File Transfer Details Form Instructions The structure of this form is aligned with existing industry practice whereby the receiver of files nominates the file names they are to receive from the sender One Clearing Participant as Receiving Principal will complete this form with details of all files they will receive from another Clearing Participant via the LVCS The other Clearing Participant as Sending Principal will be asked to confirm that they will use those file names when delivering files to the LVCS If they will not use those names file name translation will be required and additional details will be sought by the RBA from this Clearing Participant The RBA will complete the environment and participant details following initial discussions with each Clearing Participant Each participant must check that the details recorded are accurate Receiving Principal Fill in the table with the details of each file you will receive from the other Clearing Participant Only COIN Participants may need to complete Column C File Path This column can be left blank for files that will be delivered to the default destination setup during establishment of COIN connectivity with the LVCS File Path may be a sub mailbox or LAN sub directory address COIN and SWIFT Participants must complete Column D File Name to be Received by LVCS If you do not exchange a particular file type with this Clearing Participant
54. ronment Pre Production Receiving Principal to complete Columns C and D For COIN Participants only type the file path if applicable into Column C File Path For example this may be a sub mailbox or a LAN address Excel will not allow you to type as the first character in a cell Use an apostrophe as the first character to indicate text For COIN and SWIFT Participants type the names that you wish incoming files to have into Column D File Name to be Received from LVCS Write NOT EXCHANGED for all file types not exchanged with this Clearing Participant File File Type Description File Path File Name to be Received from LVCS Type Completed by Receiving Principal if required Completed by Receiving Principal EPDA File A Electronic Presentment EPDB Fi Presentment Ack and Technically Invalid uS pf E E i ile B EPDC File C Presentment TI Ack i i i EPDD File D Dishonour Dishonour refusal and V R p CEIS CECS Interchange Summary Report July 2010 34 vy LVCS User Guide RITS Sample LVCS Forms and Reports 8 2 Participant File Transfer Details Report Once the RBA has recorded the details advised on each Participant File Transfer Details Form a Participant File Transfer Details Report will be produced for each Clearing Participant This report will show the details of all File Rules that have been entered and will be split to show files sent and files received The report shows this file e
55. rticipants who use a Courier referred to as an Agent in the RITS Regulations and Conditions of Operation for their file exchanges who may now wish to directly perform this function and e a party that wishes to establish operations as a Courier on behalf of a Clearing Participant 1 4 Obtaining Copies of this User Guide This user guide and other RITS Member documentation on the LVCS are available from the RITS Information Facility The Information Facility can be accessed from within RITS select the Information icon in the Header or via the Internet http www rba gov au rits info Guides are downloadable in PDF form which can then be saved locally or printed If a Member has difficulty downloading the user guide the Reserve Bank will provide limited printed copies on request July 2010 1 v4 LVCS User Guide RITS I ntroduction 1 5 RBA Contacts All general enquiries regarding the LVCS should be directed to the LVCS Help Desk Contact details are as follows Telephone 1800 617 566 Email Ivcshelpdesk rba gov au Facsimile 02 9551 8063 Telephone and email support are available during normal clearing hours i e between 7 00 am and 1 00 am from Monday to Saturday on days that are not national public holidays In addition the table below lists additional RBA contacts for business and technical support in relation to the establishment of file transfers using the LVCS Role assisting with LVCS set up Contact Payme
56. s with the RBA as a Clearing Participant and as Collator 4 1 Network Service Overview The RBA has set up a single SWIFT FileAct business service known as SWIFTNet Bulk Payments by the RBA The RBA is the Administrator of this service The RBA has established Production Live and Pre Production Industry Test Environments for use by participants The Pre Production Environment is indicated in the technical service name by the suffix pu For each environment there are two RBA FileAct Closed User Groups CUGs real time and store and forward indicated in the technical service name by the suffixes rt and sf Participants that use only the real time or the store and forward mode need only join the relevant CUG SWIFT Participants that wish to use the store and forward mode as a fall back to the real time mode will need to join both CUGs All LVCS file exchanges using SWIFT FileAct must use the SWIFT Request Type of pacs xxx cfe This applies to the SWIFT leg of each file exchange to and from the LVCS and covers all Exchange Partners including the RBA When the Low Value Settlement Service commences other Request Types will be introduced The RBA will use the following SWIFT Distinguished Names DNs for each CUG and Request Type combination Pre Production ou preprod ou bulkp o rsbkau2s o swift Production ou bulkp o rsbkau2s o swift These DNs apply to the RBA as both Sender Requestor and Receiver Responder in each
57. sses are complete However File Rules are still inactive The activation of File Rules is covered in the next section 6 4 Activation of File Rules in Pre Production The Exchange Partners the new LVCS Participant and the existing LVCS Participant must agree upon the activation date s of File Rules for their Pre Production file exchanges The activation of all File Rules can occur at the same time or participants can advise a different time for each File Rule or group of File Rules The RBA will only activate a Pre Production File Rule relating to a file transfer from one Clearing Participant to another Clearing Participant after it has received authorisation to do so from both parties or their Courier s For the LVCS Pre Production Environment this authority can be provided to the RBA via an email to the LVCS Help Desk Ivcshelpdesk rba gov au The RBA will confirm via an email to both participants and or Courier s that it has activated the requested File Rule s in the LVCS Pre Production Environment Testing can now commence 6 5 Testing of File Exchanges The LVCS Pre Production Environment will be available each business day unless otherwise advised by the LVCS Help Desk for file transfer testing and testing may occur at the times agreed between participants However participants should note that support for the LVCS Pre Production Environment will only be provided by the RBA between 9 00 am and 5 00 pm each business day Ju
58. st ACTIVITY REFER TO COMPLETED SECTION STEP Receive Participant File Transfer Details Form as completed by the other Step 4 Clearing Participant from the RBA Review the other Clearing Participant s completed form as a Sending Step 4 Principal This involves checking that the test file names listed are the same as the file names you will send to the other Participant Return the form to the RBA Receive a Participant File Details Report from the RBA which lists all File Step 6 Rules between you and the other Clearing Participant entered into the LVCS Carefully review the details in the Participant File Details Report Step 7 Confirm via email to the RBA that details are correct Step 7 Pre Production Activate File Rules 6 4 Contact the other Clearing Participant or its Courier if applicable to agree on the activation date for test File Rules Advise the RBA via email of the activation date The other Clearing Participant or its Courier if applicable will also email the RBA to confirm this date Pre Production Testing of file exchanges 6 5 Perform end to end file transfer testing as agreed with the other Clearing Participant For COIN participants perform testing using the LVCS primary and secondary host IP addresses and using both your primary and your secondary sites Production Set up of File Rules 6 6 Receive Participant File Transfer Details Form from the RBA Step 1 Enter production file names into the Participant
59. teondaacenidens 13 4 SWIFT FILEAGCT eoisciocucusenus nun E Ea rAnEEU RS ER RYNER RS S YN RR ENREN ESEIUNRRNERURSN REN RS ENEEE EN 15 4 1 Network Service OVOLVIGW couecitiiticeko pe bbrtesot nce d mpeest cun bbUD De adore bd GeM exe dicen tossed 15 4 2 SWIFT Options when SEMOING THES reiini peperere cec nee tne a one een 16 4 3 SWIFT configuration when receiving files ssssessesssssesss 16 4 4 Handling SWIFT Possible Duplicate Emissions sesseessem 16 4 5 Closed User Group enrolment 2 5 c ene rap a ERI TRA EE URRNFA AME RIEEC A beens 16 5 COIN iiic essa kx se ka ad tre ret reer rr cere rere re reer ere rer rere rte eer reer cere errr eer ere rey 18 5 1 Participants COIN CONMECC OMi rines indai aaia a iaip 18 5 2 RBA COIN COnmechiOniz scctkiascaisiniaiies aetna A AA E E A 18 5 3 Exchange of Pre Shared Secrets ise rer ar En RENI Aa ERAN En aa buie EREKREAS 18 5 4 Allocated Network Address Spaces i euet D aA RR re HE RARE ER RR ERSE 19 5 5 RBA Host Environments IP Addressing cecceeceee aenieei 20 5 6 File Transfer ProtOcOlinmeriratos ET 20 Bil COUN MOR MO GING cba decor pet Eo ndr a aevi rac ede dte br tins ater nitidis 21 6 PROCESS FOR ESTABLISHING LVCS FILE TRANSFERS eene 22 6 1 Establish Cone EIE sias aau o iore eR tete mate nd a aen etsi uae e beu ned 22 6l SWF eR 22 oL gen 22 6 2 Agree project plan with each existing LVCS Participant sssssseseeseeeee
60. to the LVCS by North Bank to be sent to South Bank the root or default destination EPDA Fle A Electronic Presentment _ lt ee EPDB Hle 8 Presentment Ackand Technically rali i O EPDC ee Presentment Techncaly invade EPDD Feb Dishonour Dishonour Refusal and VIR EPDE Fiet Dishonour Ack and Technicaly invalid SSN Emor er Dishonour Technically iva cc LL DENT retEmry Normal ransadion le PDESYSINFILEXN STH DENS Direct Entry Normal Summary Fle PDESYS INFILE SUMM STH DEGT _ Dvrect Entry Government TransactonMle TP pess Direct Entry Government Summary Fle I LLL ICEIS GECS Interchange Summary Report LB rest Test Files eee Part C Activation of File Types Tick one of the options below Please activate all of the file types above at Date 20 Time am pm circle one will advise of activation date s separately Contact the Reserve Bank to discuss your requirements and to obtain an appropriate form Part D RITS Authorised Signatories Name please print July 2010 37 vq RITS 8 3 LVCS File Rule Activation Form This form allows for File Rules to be activated and deactivated LVCS User Guide Sample LVCS Forms and Reports It will
61. turned to the RBA via email 4 The RBA records the details of each individual file name listed in the form as a File Rule in the LVCS Production Environment Each File Rule created is initially set to a status of inactive July 2010 25 vy LVCS User Guide RITS Process for Establishing LVCS File Transfers Step Description 5 The RBA prints and sends a LVCS Production Environment Participant File Details Report to each Clearing Participant or its Courier for verification This report shows the name of the Clearing Participant the name of the Clearing Participant s Courier if used the name of the other Clearing Participant the name of the other Clearing Participant s Courier if used the environment LVCS Production Part A as a File Sender o the File Type and File Type description and o the sending file name or match expression incorporating wild cards if the file name has variable components e Part B asa File Recipient o the File Type and File Type description o the receiving file name and o the nominated non default destination address details if applicable 6 Each Clearing Participant checks that all details in its LVCS Production Environment Participant File Details Report are correct The RBA should be contacted if any of the details are incorrect The RBA will re issue the report if any changes are required Once all the details have been confirmed as correct each
62. will not use this information to process the file transfer 4 3 SWIFT configuration when receiving files Unless otherwise requested the RBA will send all LVCS files to SWIFT participants using real time mode and without the non repudiation or delivery notification options selected SWIFT Exchange Partners should note that the LVCS will populate the Filelnfo field of each file transfer request that it sends to SWIFT with the following information Compression None Source XXX Dest YYY Type ZZZZ where XXX is the APCA 3 character clearing code of the Exchange Partner that sent the file to the RBA YYY is the APCA 3 character clearing code of the Exchange Partner to which the RBA is sending the file ZZZZ is a 4 character code for the File Type based on the abbreviations contained in Section 2 5 of this document 4 4 Handling SWIFT Possible Duplicate Emissions If the LVCS receives a file via SWIFT FileAct which has a Possible Duplicate Emission PDE indicator it will check to see if that transmission is a duplicate emission by looking at the SWIFT Message ID If another file transfer has already been received with the same SWIFT Message ID the LVCS will ignore the second transmission If no other file transfer record has the same SWIFT Message ID the transmission will be processed If the LVCS is unsuccessful in its first attempt to connect to a SWIFT Participant using the FileAct real time mode known as a handshake t
63. write NOT EXCHANGED Email the form back to the RBA Ivcshelpdesk rba gov au The RBA will lock the cells completed by the Receiving Principal to prevent amendment and email the form to the Sending Principal Sending Principal The Sending Principal checks that the file names indicated in Column D are the names that each file will have when they are delivered to the LVCS for on sending to the Receiving Principal The file name must be the outgoing or destination file name not the source name that the file may have when it is generated by your application If you are going to deliver the file to the LVCS with a different file name to that shown in Column D please contact the RBA as you will need to complete additional details and the RBA will need to amend the form to allow this to occur Email the form back to the RBA Ivcshelpdesk rba gov au Verification In Pre Production once verified each participant will email the RBA Ivcshelpdesk rba gov au to confirm the report is correct In Production once verified each participant will need to arrange to have this report signed by their RITS Authorised Signatories and return it to the RBA via pdf email July 2010 32 vy LVCS User Guide RITS Sample LVCS Forms and Reports Second Worksheet Completed by North Bank as Receiving Principal RBA Low Value Clearing Service Participant File Transfer Details Form Files to Receiving Principal North Bank via Courier
64. xchange information against a single other Clearing Participant only For Production the relevant Clearing Participant must check and have the report signed by two RITS Authorised Signatories The activation of File Rules can also be authorised as part of this process Once signed the report can be returned to the RBA as a PDF document attached to an email The worked example on the following pages show North Bank s report for its exchanges with South Bank and South Bank s report for its exchanges with North Bank July 2010 35 vy LVCS User Guide RITS Sample LVCS Forms and Reports Participant File Transfer Details Report For North Bank with South Bank RBA Low Value Clearing Service Participant File Transfer Details Report North Bank via Courier North Agent Services With Clearing Participant South Bank via Courier Environment Pre Production This report is used by the Reserve Bank to confirm that the following details which have been entered into RITS for participation in the Low Value Clearing Service are complete and correct Part A Files Sent to the LVCS by North Bank to be sent to South Bank File Type File Type Description File Name Sent to LVCS EPA Fie A Electronic Presentment EPDB Fie 8 Presentment Ack and Technicaly Trvalid EPC File C Presentment Technically Invalid Aci

Download Pdf Manuals

Related Search

Related Contents

Fiche Technique bombe silicone  ① ② ④ ③ ⑤ ⑥  Instruction Manual  ABI PRISM 7000 Sequence Detection Systems Relative  DSX 2040-REV.1_MAN.cdr  www.snapcn  Jaton VIDEO-PX7200GS-256LP NVIDIA GeForce 7200 GS graphics card    取扱説明書  User`s Manual - Network Webcams  

Copyright © All rights reserved. Failed to retrieve file