Home

Operating Instructions Air Conditioner

1. QUICK GUIDE Panasonic Operating Instructions Air Conditioner Model No Indoor Unit Outdoor Unit CS RE18MKR CU RE18MKR CS RE2Z4MKR CU RE24MKR CS RE2Z8MKR CU RE28MKR Before operating the unit read these operating instructions thoroughly and keep them for future reference F568152_YS0311 0_EN indd 1 F568152 21 Jun 11 10 39 44 AM SAFETY PRECAUTIONS To prevent personal injury injury to others or property damage please comply with the following Incorrect operation due to failure to follow instructions below may cause harm or damage the seriousness of which is classified as below This sign warns of death or serious WARNING injury Thank you for purchasing Panasonic Air Conditioner TABL E OF CONTENTS This sign warns of injury or damage The instructions to be followed are classified by the following symbols This symbol denotes an action that is PROHIBITED E mg These symbols denote an E actions that is COMPULSORY ESS WARNING I NOTE INDOOR UNIT AND OUTDOOR UNIT This appliance is not intended for use by persons including The illustrations in this manual are for children with reduced physical sensory or mental capabilities explanation purposes only and may or lack of experience and knowledge unless they have been differ from the actual unit It is subjected given supervision or instruction concerning use of the appl
2. pH7 or neutral household detergent maintenance has to be carried out at regular intervals Do not use water hotter than 40 C Dirty unit may cause malfunction and you may see error code H99 Please consult authorized dealer 1 INDOOR UNIT 7 AUTO OFFION BUTTON e Wipe the unit gently with a soft dry cloth e Use when remote control is misplaced or a malfunction occurs 2 FRONT PANEL Remove Front Panel Press once e Raise and pull to remove the front panel Press and hold until 1 beep is heard Close Front Panel Press and hold until 1 beep is heard then release Heating Press again until 2 beeps then release a Press the button to turn off e Press down both ends of the front panel to close it securely 8 AIR PURIFYING FILTER 3 REMOTE CONTROL RECEIVER Vacuum the air purifying filter 4 ALUMINIUM FIN e Vacuum the filter whenever necessary Replace the filter every 10 years or replace any damaged filter 5 HORIZONTAL AIRFLOW DIRECTION LOUVER Part no CZ SA22P Do not adjust by hand 9 AIR FILTERS 6 VERTICAL AIRFLOW DIRECTION LOUVER e Air filter cleaning is required every two weeks e Wash rinse the filters gently with water to avoid damage to the Do not adjust by hand filter surface Dry the filters thoroughly under the shade away from fire or direct sunlight e Replace any damaged filters F568152_YS0311 0 EN indd 6 21 Jun 11 1
3. aerate the room regularly After long period of use make sure the installation rack does not deteriorate to prevent the unit from falling down REMOTE CONTROL Do not use rechargeable Ni Cd batteries It may damage the remote control To prevent malfunction or damage of the remote control e Remove the batteries if the unit is not going to be used for a long period of time e New batteries of the same type must be inserted following the polarity stated POWER SUPPLY Do not pull the cord to disconnect the plug to prevent electric shock 21 Jun 11 10 39 53 AM REMOTE CONTROL Press the remote control s button I 1 TO TURN ON OR OFF THE UNIT FR POWER Please be aware of the OFF indication on the remote control display to prevent the unit from starting stopping improperly Maximum distances 8m 2 TO SET TEMPERATURE e Selection range 16 C 30 C Not applicable for FAN mode e Operating the unit within the recommended temperature could induce energy saving INDICATOR HEAT mode 20 C 24 C COOL mode 26 C 28 C dpi cael DRY mode 1 C 2 C lower than room temperature quieveconomy Orange ES POWERFUL Orange 3 TO SELECT OPERATION MODE AUTO mode For your convenience During operation mode selection the power indicator blinks e Unit selects operation mode during startup according to temperature setting and room temperature HEAT mode To enjoy warm
4. before calling for servicing SYMPTOM CHECK Heating Cooling operation is not working efficiently gt Set the temperature correctly e Close all doors and windows e Clean or replace the filters e Clear any obstruction at the air inlet and air outlet vents Noisy during operation gt Check if the unit has been installed at an incline e Close the front panel properly Remote control does not work e Insert the batteries correctly Display is dim or transmission signal is weak e Replace weak batteries The unit does not work gt Check if the circuit breaker is tripped e Check if timers have been set The unit does not receive the signal from the remote b gt Make sure the receiver not obstructed control e Certain fluorescent lights may interfere with signal transmitter Please consult authorized dealer The unit stops and the timer indicator blinks Use remote control to retrieve error code 1 Press for 5 seconds Note e For certain errors you may restart the unit for 9 Press until you hear beep sound then write down the error Press for 5 code limited operation with 4 3 seconds to Te 6 S beeps during operation quit checking SET CHECK CLOCK RESET starts 4 Turn the unit off and reveal the error code to authorized dealer F568152_YS0311 0 EN indd 7 21 Jun 11 10 40 15 AM QUICK GUIDE Remote Control Preparation Pull out Insert AAA or R03 batteries c
5. to Remote Control Preparation at e Cannot be selected at the same time back cover INFORMATION FOR SEASONAL INSPECTION AFTER EXTENDED NON USE NON SERVICEABLE CRITERIAS e Checking of remote control batteries TURN OFF POWER SUPPLY AND UNPLUG No obstruction at air inlet and air outlet vents then please consult authorized dealer under the e Use Auto OFF ON button to select Heating Cooling operation After 15 following conditions minutes of operation it is normal to have the following temperature Abnormal noise during operation difference between air inlet and air outlet vents Water foreign particles have entered the remote Cooling 2 8 C Heating 2 14 C control e Water leaks from Indoor unit FOR EXTENDED NON USE e Circuit breaker switches off frequently Activate e ion operation for 2 3 hours as an alternative to remove moisture Power cord becomes unnaturally warm left in the internal parts thoroughly to prevent mould growth Switches or buttons are not functioning properly Turn off the power supply and unplug Remove the remote control batteries F568152_YS0311 0 EN indd 5 21 Jun 11 10 40 03 AM INDOOR UNIT N e Switch off the power supply and unplug before cleaning e Do not touch the aluminium fin sharp parts may cause injury CAUTION CLEANING INSTRUCTIONS HINT Do not use benzene thinner or scouring powder e To ensure optimal performance of the unit cleaning e Use only soap
6. 0 40 09 AM es TROUBLESHOOTING The following symptoms do not indicate malfunction SYMPTOM CAUSE Mist emerges from indoor unit gt Condensation effect due to cooling process Water flowing sound during operation gt Refrigerant flow inside the unit The room has a peculiar odour gt This may be due to damp smell emitted by the wall carpet furniture or clothing Indoor fan stops occasionally during automatic fan speed gt This helps to remove the surrounding odours setting Airflow continues even after operation has stopped gt Extraction of remaining heat from the indoor unit maximum 30 seconds Operation is delayed a few minutes after restart e The delay is a protection to the unit s compressor Outdoor unit emits water steam gt Condensation or evaporation occurs on pipes Timer indicator is always on gt e The timer setting repeats daily once set Power indicator blinks during HEAT mode with no warm air The unit is in defrost mode and AIR SWING is set to supply and louver is closed AUTO Indoor fan stops occasionally during heating operation gt To avoid unintended cooling effect Power indicator blinks before the unit is switched on gt This is a preliminary step in preparation for the operation when the ON timer has been set Cracking sound during operation gt Changes of temperature cause the expansion contraction of the unit Check the following
7. air e Unit takes a while to warm up The power indicator blinks during this operation COOL mode To enjoy cool air e Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode DRY mode To dehumidify the environment Unit operates at low fan speed to give a gentle cooling operation FAN mode To circulate air in the room Remote on Control display CONDITIONER 4 TO SELECT FAN SPEED 5 OPTIONS S E oe FAN SPEED S a e For AUTO the indoor fan speed is automatically adjusted a RSWING 3 according to the operation mode LE Ty ee Q 5 TO ADJUST AIRFLOW DIRECTION 5 OPTIONS s Pm A gt t gt o D AIR SWING A ee l 11 gt Giada is e Keeps the room ventilated e In COOL DRY mode if AUTO is set the louver swing left right and up down automatically e e In HEAT mode if AUTO is set the horizontal louver fix at predetermined position The vertical louver swing left right after the temperature rises AUTO gt gt ad atl p antl alll 30 0 m 01010 TO SAVE ELECTRICAL POWER ely QUIET ECONOMY CONSUMPTION aN e Save power consumption at unoccupied room by adjust set temperature up to 3 C automatically e Brightness of all indicators will be dimmed F568152_YS0311 0 EN indd 4 21 Jun 11 10 39 58 AM 7 TO REACH TEMPERATURE QUICKLY TO SET THE TIMER e This operation will stop automatically E weary e 2 sets of ON and OFF timers are a
8. an be used 1 year Close the cover aAaAAN Oo Press CLOCK Set time Confirm SET e CLOCK RESET yAN GO NID MNO Nata rari AUTO iE LILI FAN i AUTO HEAT gt COOL FAN lt DRY gt Select the desired mode Bo o F F O N Q EYE AIR SWING Cuer een Say ep Start stop the operation TIMER ikiiki malbena o ve ey rs RC SET CHECK CLOCK RESET Panasonic Select the desired temperature CGNVERTER Information for Users on Collection and Disposal of Old Equipment and used Batteries Information on Disposal in other Countries Note for the battery symbol bottom two outside the European Union symbol examples These symbols are only valid in the European This symbol might be used in combination with Union If you wish to discard these items please a chemical symbol In this case it complies contact your local authorities or dealer and ask with the requirement set by the Directive for for the correct method of disposal the chemical involved Panasonic Corporation Website http panasonic net F568152 Printed in Malaysia YS0611 1 F568152_YS0311 0 EN indd 8 21 Jun 11 10 40 21 AM
9. fied cord to prevent overheating and fire To prevent overheating fire or electric shock Do not share the same power outlet with other equipment Do not operate with wet hands Do not over bend the power supply cord Do not operate or stop the unit by inserting or pulling out the power plug If the supply cord is damage it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard It is strongly recommended to be installed with Earth Leakage Circuit Breaker ELCB or Residual Current Device RCD to prevent electric shock or fire To prevent overheating fire or electric shock Insert the power plug properly Dust on the power plug should be periodically wiped with a dry cloth Stop using the product when any abnormality failure occurs and disconnect the power plug or turn off the power switch and breaker Risk of smoke fire electric shock Examples of abnormality failure The ELCB trips frequently e Burning smell is observed Abnormal noise or vibration of the unit is observed Water leaks from the indoor unit Power cord or plug becomes abnormally hot Fan speed cannot be controlled The unit stops running immediately even if it is Switched on for operation The fan does not stop even if the operation is stopped Contact immediately your local dealer for maintenance repair Prevent electric shock by switching off the power supply and un
10. iance to change without notice for future by a person responsible for their safety Children should be improvement supervised to ensure that they do not play with the appliance Please consult authorized dealer or specialist to clean the OPERATION CONDITION internal parts repair install remove and reinstall the unit m Improper installation and handling will cause leakage electric Use this air conditioner under the following shock or fire e ETE Do not install the unit in a potentially explosive or flammable Temperature C atmosphere Failure to do so could result in fire p DBT a Do not insert your fingers or other objects into the air COOLING Hes conditioner indoor or outdoor unit rotating parts may cause injury zm EnG wax 30 l Do not touch the outdoor unit during lightning it may cause O mn 6 electric shock Do not expose yourself directly to cold air for a long period to o Do not sit or step on the unit you may fall down ee C one corn CU RE24MKR CU RE28MKR Temperature C enone Remote Control ean DBT Dry bulb temperature C lt 2 WBT Wet bulb temperature Air Outlet F568152_YS0311 0 EN indd 2 cy 21 Jun 11 10 39 48 AM WARNING REMOTE CONTROL Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries POWER SUPPLY Do not use modified cord joint cord extension cord or unspeci
11. plug when Before cleaning or servicing Extended non use Abnormally strong lightning activity F568152_YS0311 0_EN indd 3 CAUTION INDOOR UNIT AND OUTDOOR UNIT Do not wash the indoor unit with water benzene thinner or scouring powder to avoid damage or corrosion at the unit Do not use for preservation of precise equipment food animals plants artwork or other objects This may cause quality deterioration etc Do not use any combustible equipment in front of the airflow outlet to avoid fire propagation Do not expose plants or pet directly to airflow to avoid injury etc Do not touch the sharp aluminium fin sharp parts may cause injury SY Do not switch ON the indoor unit when waxing the floor After waxing aerate the room properly before operating the unit Do not install the unit in oily and smoky areas to prevent damage to the unit Do not dismantle the unit for cleaning purpose to avoid injury Do not step onto unstable bench when cleaning the unit to avoid injury Do not place vase or water container on the unit Water may enter the unit and degrade the insulation This may cause an electric shock Do not open window or door for long time during COOL DRY mode operation Ensure drainage pipe is connected properly and keep drainage outlet clear of gutters containers or does not immersed in water to prevent water leakage After long period of use or use with any combustible equipment
12. vailable to turn ON after 20 minutes aN or OFF the unit at different preset time e Complete below procedures to set each timer ON Gar a Bee Cg DA eS 9 Press and hold for 5 seconds to dim or restore the GolacvON Gr ORE timer unit s indicator brightness 8 TO ENJOY QUIET OPERATION lz e This operation reduces airflow noises QUIET ECONOMY 4 e Example of application at living room Press and hold for approximately 10 seconds to Morning ON 1 at 07 00 Wake up show temperature setting in C or F OFF 1at 08 00 Out for work Evening ON 2 at 17 00 Back home 11 Press to restore the remote control s default setting OFF 2 at 22 00 Sleep To cancel ON or OFF timer press ON 12 a i ti select respective 1 or 2 then press ma a a If timer is cancelled manually or due to power failure you can restore the timer again by pressing ON oF to select respective 1 0r 2 then press Sem NOTES e Upcoming timer will be displayed and will be activated in sequence f e When ON Timer is set the unit may start earlier up QUIET POWERFUL ECONOMY mm cay kaor to 35 minutes before the actual set time in order to Can be activated in all modes and can be cancelled achieve the desired temperature on time by pressing the respective button again e Timer operation is based on the clock set in the a remote control and repeats daily once set For clock am oy setting please refer

Operating Instructions Air Conditioner

Contents

Download Pdf Manuals

Related Search

Related Contents