OPERATING INSTRUCTIONS
Contents
1. ROBAND Manufactured By ROBAND AUSTRALIA PTY LTD OPERATING INSTRUCTIONS GRILL MAX AUTOMATIC TOASTERS AND GRILLERS Models GMX610 GMX810 GMX815 Version 4 GMX810G Version 4 GMX1515 Version 3 Includes International models UK and F Special Features e Variable Multi Rack Positions Advanced Control Safety Systems e Ultra Durable Stainless Steel Elements e Easy Clean Crumb Tray amp Reflector These instructions cover the models of ROBAND Grill Max Automatic toasters and grillers listed above Although there are slight variances between models the installation operation care and maintenance procedure is the same for all 19 11 2014 Roband Australia is a wholly Australian owned company and has been manufacturing quality commercial catering equipment for the food service industry for more than 50 years Roband products are engineered and manufactured to the highest standards to provide functionality reliability and durability and our quality products are exported world wide Included in the comprehensive Roband range are Toasters Fryers Milkshake Mixers Rotisseries Food Display Cabinets and much more Roband Australia also acts as the Australian agents for Vitamix Blenders Noaw Meat slicers F rje Cookware Robalec Soup Rice Warmers Robatherm Urns Austheat Fryers Dipo Induction amp Autofry Machines Roband also has its own line of commercial cookware and cutlery u2. Any damage to the unit through the use of harsh or improper cleaning agents is entirely the fault of the user ROBAND A US T RA LIA PTYUD Page MAINTAINING APPEARANCE OF THE STAINLESS For protection and cleaning of brushed stainless steel surfaces it is best to use a cleaner that will both remove grease and dirt while protecting the surface from future marks Whilst there are many possible products on the market our tests have shown that the following products work well on brushed stainless surfaces Stainless Steel Polish Water based Supplied by Clean Plus Detergents Pty Ltd Simple Green Pro M cleaner Supplied by Simple Green TROUBLESHOOTING If the toaster does not heat up check the following points before calling for service v The toaster is plugged in correctly and the power switched on v The rotary on off switch is in the on position and the green pilot light is illuminated v The power point is not faulty v The energy regulator s and timer are in the correct relative position v Check Appendix A at the back of this manual RCD S Only after all these points have been checked should you call for service ROBAND Page 8 AUSTRALI A SPECIFICATIONS Mo GMX610 GMX810 GMX815 GMX1515 GMX810G Volts AC Power Consumption 1795 2135 2105 2505 3155 3755 31 0 3 5 2015 2400 Watts Nominal Dimensions Constant research and deve
3. authorized by Roband Australia prior to any action being taken The company reserves the right to reject a claim for warranty if it is not completely satisfied with the circumstances under which it occurred and any other costs incurred for false claims or faults due to incorrect usage etc are the responsibility of the claimant Roband Australia Pty Ltd nor any subsidiary company or Agent shall be liable for loss of profit or damage to other equipment and property except where it is in breach of the guarantees provided in accordance with ochedule 2 of the Competition and Consumer Act 2010 Cth or the applicable legislation from time to time The goods come with guarantees that cannot be excluded under the Australian Consumer Law ACL You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably forseeable loss or damage You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not constitute a major failure Generally authorized service agents are located in all areas which have authorized distribution dealers For the name of your nearest Australian authorised service agent please contact Roband Australia Pty Ltd 1 Inman Road Cromer NSW 2099 Warranty Number 1800 268 848 Phone 02 9971 1788 Fax 02 9971 1336 All other countries please contact your selling Agent Please complete the following details and keep this card in a saf
4. OS888 Toasting Rack VS0259 Side Rack Assembly ROBAND A US TRA LIA PTYLD Page 13 TOASTING ADVICE AN EXCERPT FROM AN ARTICLE PUBLISHED BY ROBAND AUSTRALIA Regardless of the brand any radiant heat toaster will run into problems when faced with the nasty prospect of fresh bread The reason for this is simple the high moisture content in fresh bread acts to counter the toasting effect The moisture in each slice is driven down through the body of the bread ie the top dries out faster resulting in the top of the bread toasting before the bottom It is annoying for several reasons Primarily commercial restaurants and cafes want their toast done as fast as possible but high moisture content slows this toasting down and the uneven toast produced can be quite frustrating The solution to this is very simple and widely known the bread needs to be a day old before toasting By using day old bread you effectively bypass the problem of moisture content as most breads will have lost a significant portion after a single day Some breads have particularly high moisture contents and these may retain a higher level of moisture than your standard Sunblest or Tip Top Toasting can be further improved by ensuring that the bread is not stored in a fridge or cool room prior to toasting Refrigerated bread will not only start the bread cold and extend the toasting time further it will also serve to retain within the bread the very moi
5. and Media Authority ACMA in regards to Electromagnetic Compatibility As testament to such compliance these units bear the RCM symbol For further information contact the Australian Communications Authority PO Box 13112 Law Courts Melbourne VIC 8010 CE Roband products bearing the CE compliance mark have been designed and manufactured to comply with European Standards and Directives A copy of the CE Declaration of Conformity is located at the back of these instructions ACSS Advance Control Safety System Australia Only The ACSS framework is a stringent and specific set of voluntary requirements aimed at the electrical safety reliability and longevity of equipment used in the foodservice industry A unit bearing the ACSS mark is your guarantee that you are purchasing a machine built to far exceed the Australian standards and most International Standards The unit has been designed to be safer particularly from an electrical aspect and last longer than similar units on the market today ROBAND Page 2 AUSTRALI A INSTALLATION Remove all the packaging materials and tape as well as any protective plastic from the machine Clean off any glue residue left over from the protective plastic using methylated spirit Place the Toaster on a firm level surface in the required position Adjust the feet if necessary to level the unit if the surface is slightly uneven Before connecting the toaster to the powe
6. applicator Use only soapy water to clean the unit many industrial chemical cleaners will damage plastics polycarbonates or stainless steel all of which are used in the construction of these machines Such damage could severely affect the operation of the unit and may result in machine failures Never apply soapy water with a spray applicator as direct spraying of the machine can result in moisture in the electrical controls Daily cleaning of the crumb tray is essential The crumb tray may be removed by sliding it out from the toaster The crumb tray should be emptied and washed with warm soapy water he top reflector should also be checked and cleaned periodically The reflector is located on the underside of the top To remove the reflector simply slide it out Note The reflective surfaces of the crumb tray and top reflector aid the cooking process Over time these surfaces may become tarnished and this reduces the efficiency and performance of the toaster To overcome this aluminium foil can be wrapped over these two components to restore a good reflective surface This foil can then be replaced when necessary CAUTION Although every care is taken during manufacture to remove all AS sharp edges care should be taken when cleaning and handling the toaster to avoid injury CAUTION Some cleaning agents can damage stainless steel usually through prolonged use For this reason we recommend cleaning with soapy water
7. ce before bending anything ROBAND Page 14 A US T RA LIA PYE APPENDIX A RESIDUAL CURRENT DEVICES RCD S Also known as Earth Leakage Protection systems an RCD is a protective device that automatically disconnects the live conductors of a circuit when an earth leakage current reaches a predetermined value Australian and International Standards detail when and where RCD s are to be used in electrical installations but common practice in many countries is to use 30mA RCD in general commercial applications This is typically done because 30mA RCD s are readily available and are used in domestic installations For Commercial installations and for socket outlets providing power to commercial heating equipment Toasters Bain Maries and Grillers 30mA RCDS s are typically unsuitable unless they are protecting only one device Higher rated RCD s should be considered if protecting multiple socket outlets giving appropriate consideration to the type of equipment being protected AS NZS3000 2 5 2 gives the following warnings that should have been taken into consideration when an RCD circuit was installed To avoid unwanted tripping due to leakage currents and transient disturbances care should be taken to ensure that the sum of the leakage currents of electrical equipment on the load side of an RCD is less than 1 3 of its rated residual current To avoid excessive leakage current causing unwanted tripping where socket outlets a
8. d a person not suitably qualified attempt repairs to any electrical equipment Page 11 ROBAND A US TRA LIA SPARE PARTS LIST COMMON PARTS TO ALL MODELS PART NO DESCRIPTION QTY PART NO DESCRIPTION EC0031 Ceramic Terminal Block MCO0846 CRINES ES0258 cr anne SAR ES PC0246 Wiring Grommet 5 8 Foot Set inc 4x p Pilot Light Green TS0021 Energy with Aluminium Knob GMX610 PARTS LIST PART NO DESCRIPTION QTY PART NO DESCRIPTION MCO0887 Toasting Rack VS0257 Element Assembly P PCO0060 Cord Clamp 10 Amp VS0258 Side Rack Assembly GMX810 PARTS LIST PART NO DESCRIPTION QTY PART NO DESCRIPTION EC0239 Plug amp Cord 10 Amp PCO0060 Cord Clamp 10 Amp T HC0202 Element 1120W 230V VS0255 Element Assembly 2 MC0884 Toasting Rack VS0258 Side Rack Assembly ROBAND Page 12 A US T RA LIA PYE SPARE PARTS LIST Continued GMX815 PARTS LIST PART NO DESCRIPTION QT PART NO DESCRIPTION QTY Y EC0306 Plug amp Cord 15 Amp PC0061 Cord Clamp 15 Amp 1 HC0205 Element 1680W 230V VS0256 Element Assembly MC0884 Toasting Rack VS0258 Side Rack Assembly GMX810G PARTS LIST PART NO DESCRIPTION QT PART NO DESCRIPTION QTY Y IEEE o GMX1515 PARTS LIST PART NO DESCRIPTION QT PART NO DESCRIPTION QTY Y EC0306 Plug amp Cord 15 Amp PC0061 Cord Clamp 15 Amp HC0213 Element 1680W 230VAC VS0261 Element Assembly MC
9. e By reading these instructions carefully you can ensure that this machine is used and maintained properly helping your new investment to perform well for you now and to continue performing in the many years to come GENERAL PRECAUTIONS This machine must only be operated by qualified person s who are fully versed in the operating and safety instructions described in this manual Operators should be instructed to familiarise themselves with any and all safety instructions described in this manual prior to commencement of any maintenance or service These machines are heating units and as with any commercial heating unit the surfaces will get hot Always be careful when near an operating machine and ensure that any risk to unwary customers or staff is minimised with additional signage if necessary Due to the obvious heat hazard Roband recommends that these units be kept out of reach of children HAZARD In the case of new personnel training is to be provided in advance These machines should not be operated by persons including children with reduced physical sensory or mental capabilities or lack of experience or knowledge unless they are being supervised or being instructed concerning the safe use of the appliance by a person responsible for their safety These Toasters are generally for use with dry bread products The performance of this unit cannot be guaranteed for non bread product such as Pizza or for unusually thick or mo
10. e place NAME ADDRESS MODEL No SEHIAL No DATE PURCHASE NAME OF DEALER PLEASE RETAIN THIS SECTION FOR YOUR RECORDS DO NOT POST ROBAND AUSTRALIA PTY LTD ROBAND Page 20 AUSTRALI A OTHER LEADING PRODUCTS AVAILABLE GRILLMAX TOASTERS NOAW Slicers Manufactured Imported in Australia by ROBAND A US TRA LI A PYD Authorised Distributor Agent ROBAND A US TRA LIA
11. e power cable is not in contact with hot parts of the machine when in use Ensure that any damaged power cord is replaced before further use HAZARD Do not clean this unit with the aid of a Spray Applicator or Water Jet These units are not suitable for cleaning in a dishwasher and no parts of these machines except the grease box should ever be submerged in water Keep out of reach of children or the inept IMPORTANT SAFETY NOTE FOR MODEL GMX810G If at any time one of the glass elements should break DO NOT USE THE MACHINE Turn the unit off AT THE WALL being careful not to touch any part of the machine and remove the plug Do not allow the unit to be used again until the broken element has been replaced ROBAND Page 6 A US T RA LIA PYE CLEANING CARE amp MAINTENANCE Attention to regular care and maintenance will ensure long and trouble free operation of your toaster Although scheduled servicing is not required we do recommend you adopt a program of regular maintenance to ensure that the Toaster is clean and functional and to avoid inadvertently damaging the unit Ensure the power is off and the toaster is cool before attempting to clean any part of the machine Wipe the toaster down with warm soapy water using a damp sponge or cloth Do not immerse the toaster in water or allow the ingress of water into the A ventilation holes or controls Do not clean this unit with the use of a water jet Of Spray
12. el UK F STANDARDS This machine is designed in compliance with e Machinery Directive 2006 42 EC e Low Voltage Directive 2006 95 EC e EMC Directive 89 336 EEC including amendments to 93 68 EEC e WEEE Directive 2002 96 EC WEEE e Restriction of Hazardous Substances in Electrical and Electronic Equipment 2002 95 EC RoHS e EN60335 1 Household and similar Electrical Appliances e EN60335 2 48 Commercial Electric Toasters and Grillers e EN55014 2 1997 Electromagnetic compatibility Requirements for household appliances electric tools and similar apparatus Immunity ENVIRONMENTAL This product is designed in order to contribute as little as possible to the quantity and noxious nature of waste and risk of pollution or other environmental contamination Packaging materials used in this machine are designed to be recyclable DECLARATION hereby declare under our sole responsibility that the product mentioned above to which this declaration relates complies with the above mentioned standard s Roband Australia has appointed Valera Ltd as our EU Authorised Representative of 5 7 The Glade Business Centre Eastern Ave West Thurrock Essex RM203FH UK Tel 08 45 270 4321 Fax 0845 270 4323 E Mail info valera co uk signature of Authorised Person 2 Date 1st Sep 2010 Print Name Mal Johnston Position Director of Engineering hor ROBAND AUSTRALI A PTYLID WARRANTY Every care is taken to ensure that no defec
13. elements is indicated by the two amber pilot lights Energy Regulator The 5 minute timer allows the user to override the Energy Regulator providing full power to the elements for the period of time set with the timer dial An audible ding will occur indicating when the set time period elapses Control will then revert back to the energy regulator Using the Energy Regulator at an idle setting between timer activation will keep the machine warm reducing toasting time ROBAND AUSTRALI A Page 4 OPERATING TIPS We recommend a COOK IDLE approach for toasting This is more energy efficient then having the elements at a high setting for long periods between toasting but still enables a fast toast time IDLE When not toasting leave the Energy Regulator at a low medium heat setting 1 5 to 2 Keeps the warm up time to a minimum when toasting is next required Keeps the product warm while it awaits serving Saves energy when compared to leaving the elements on High all the time COOK When toasting is required set the timer for the required time The timer turns the toasting elements on High Cook he bread is toasted quickly The toaster returns to the idle setting at the end of the toast period During extended periods of non use we recommend you turn the machine off Do not leave the machine on unattended or overnight When making toast we recommend that you use day
14. ist bread products The machine should be disconnected from all power and allowed to cool before AA cleaning Any damaged plug or cord should be replaced before further use These machines should not be cleaned with the use of a spray applicator water jet or any other method except those outlined in the Cleaning amp Care section of these instructions Roband will accept no liability if Non authorised personnel have tampered with the machine The instructions in this manual have not been followed correctly Non original spare parts are used The machine is not cleaned correctly with the right product There is any damage to the unit 9 6 46 The machine has been modified in any way ROBAND A US T RA LIA PTYUD Page 1 PACKAGING All care is taken when packing and Roband ensures that every unit is functional and undamaged at the time of packaging The Package of these toasters should include 1 One Automatic Toaster and Griller appropriate model 2 Packing Inserts 3 Onecooking rack 4 This manual Any damage to the machine as a result of freight must be reported to the Freight Company and to the agent responsible for the dispatch of said unit within 24 hours of receipt No claims will be accepted or entertained after this period C COMPLIANCE RCM Roband products have been designed and manufactured to comply with any and all specifications set out by the Australian Communications
15. le parts Roband Australia one of our agents or a similarly qualified person s should carry out any and all repairs Any repair person s should be instructed to read the Safety warnings within this manual before commencing work on these units steel cutting processes such as those used in the construction of this machine result in sharp edges Whilst any such edges are removed to the best of our ability it is always wise to take care when contacting any edge Particular care should be taken when panels are removed eg during servicing as this may expose sharp edges HAZARD Do not remove any cover panels that may be on the machine This unit can get very hot ensure everyone is aware that the machine is operating and take care to avoid contact with hot surfaces Hot surfaces should be left well ventilated with an air gap of at least 100mm though common sense should be used if the machine is near heat sensitive materials National Standards exist outlining the positioning spacing and ventilation requirements when installing new appliances These Standards should be consulted and new equipment should be installed accordingly In any situation where specifications allow a distance of less than 100mm we would still recommend that a well ventilated air gap of not less than 100mm be maintained If the machine is near particularly heat sensitive materials common sense should be employed in determining sufficient distancing Always ensure th
16. lopment may necessitate specification changes at any time ROBAND AUSTRALI A SPTYUD Page 9 CIRCUIT DIAGRAMS MODELS GMX610 GMX810 GMX815 AND GMX1515 230VAC m BOTTOM PILOT LIGHT SELECTOR fel elfe AMBER SWITCH O 7 I MAIN PILOT LIGHT eh Be PE De GREEN o e u 6 TOP PILOT LIGHT AMBER TIMER bl b x my a al TOP ELEMENTS e 9 a a N a ENERGY REGULATOR BOTTOM ELEMENTS S E 1 c NI N A Schematic Valid models and versions starting from the serial numbers below Applicable F feci Number NOTE This circuit diagram has been provided for reference and to assist qualified service and repair agents only Under no circumstances should persons not suitably qualified attempt repairs to any electrical equipment ROBAND Page 10 AUSTRALI A CIRCUIT DIAGRAMS Continued MODEL GMX810G 230VAC SELECTOR SWITCH e ez eg TIMER z f ENERGY REGULATOR Pl Schematic Valid for Version 4 models starting from the serial numbers below licable From Model p Number 166 GMXBIOG BOTTOM PILOT LIGHT AMBER MAIN PILOT LIGHT GREEN x TOP PILOT LIGHT AMBER e TOP ELEMENTS BOTTOM ELEMENTS Bement NOTE This circuit diagram has been provided for reference and to assist qualified service and repair agents only Under no circumstances shoul
17. n any form or by any means electronic or mechanical including photocopying or posting to a website without the written permission of the publisher The material contained within this document is intended entirely for instructional purposes ROBAND AUSTRALI A PTYLID CONTENTS INTRODUJO TION 1 GENERAEL uzte2ilslgg 1 2 c 2 INSTACLA MON 3 OFERA HON e 4 GENERACE AFET YO 6 CLEANING CARE amp MAINTENANCE esee TROUBLE SRO TIN C 8 SPECIFICATION 9 CIRCUIT DIAGRAM unit nta ndun Rea PR ta nent iba mette ink tnt nmt nine ki etii 10 5 12 TOAS UNG 14 15 EC DECLARATION OF CONFORMITY eese 19 WARRANTY qe 20 ROBAND A US T RA LIA PTYUID INTRODUCTION Congratulations on your purchase of this quality ROBAND product With proper care and management your new purchase will give you years of trouble free servic
18. nder the Robinox brand name For a complete set of brochures please contact your nearest authorised dealer or contact Roband directly at our head office Roband Head Office Sydney Australia Roband Australia Pty Ltd 61 2 9971 1788 1 Inman Road 61 2 9971 1336 Dee Why NSW 2099 il sales roband com au AUSTRALIA www roband com au International pee For additional agents please email Head Office United Catering Equipment Supplies Switzer Burgi Infra Grill Ph 357 777 777 24 land Ph 41 418 554 552 Hotel Equipment Ltd Thailand Seven Five Distributors Co Ltd Ph 679 672 0666 Ph 662 866 5858 Chung Wah Kitchen Machine Ltd United Arab Boncafe Middle East LLC Ph 852 2334 5411 Emirates 9714 282 8742 Allied Food Equipment United Arab Nisa Trading LLC Ph 603 9133 5833 Emirates 9714 396 6132 Maldives Radiant Heat Maldives Pty Ltd United Metcalfe Catering Equipment i Ph 960 333 4845 Kingdom Ph 44 1766 830 456 Zealand Ph 649 274 1354 Ph 1 508 361 9226 Noumea Comptoir Materiel Professionnel Ph 687 28 50 43 Ph 1 508 361 9226 Papua New Brian Bell amp Company Pty Ltd NETHERLA AKB Bert Muller Guinea Ph 675 325 5411 NDS Ph 31 306 017 442 Allied Foodservice Equipment GREECE K amp N Engineers Ltd Ph 65 62525880 Ph 30 210 520 0440 Cyprus Fiji Hong Kong Malaysia Singapore Copyright 2014 Roband Australia Pty Ltd All rights reserved No part of this work may be reproduced or copied i
19. old bread as opposed to fresh Through the use of day old bread you will get more evenly coloured toast and faster toasting times When handling the Toast Rack be careful as it could be hot We recommend using a cloth or gloves when handling the toast rack Burns may result if not careful Mk and all staff should be forewarned of this hazard Pre made products such as Focaccias are difficult to toast if they are taken directly from a refrigerated environment As you toast these items the cold tends to sink to the bottom of the food and therefore the top tends to toast faster In these cases it is advisable to use the lowest toasting position and the product may need to be turned during the toasting process A GMX815 is the most suited unit if operations of this type will be undertaken regularly GMX810 Users Please note that the GMX810 is a 10 Amp machine If you have owned a previous unit that may have been a 15 Amp machine or greater there will be a reduced performance and you should examine whether a GMX815 would better suit your needs GMX810G Users The GMX810G has glass elements and will warm up more quickly than steel elements The GMX810G is recommended for applications where the machine is used sporadically throughout the day The toasting performance when warm is similar to metal elements GMX810 ROBAND AUSTRALI A PTYUD Page 5 M SAFETY GENERAL SAFETY This machine contains no user serviceab
20. ontrolled with the timer or the energy regulator s depending on your requirements However the way in which these methods of use are carried out varies slightly between the models Refer to the sections below for instructions relating to your particular model In all cases the machine must be switched on by the On Off rotary switch into the TOP amp BOTTOM or TOP ONLY position With the switch turned to either of these positions the main power pilot light should become illuminated to indicate the power Is on CONTROL DESCRIPTION On Off Switch Energy Regulator Timer F M abr e i N van i CG i Ta 1 A e 4 Cs ROBAND 0 l ITA TEM GRILL MAX The On Off Switch controls power to either the top element only or both top and bottom elements On Off lo switch on the top element only rotate the switch anticlockwise Switch SWitch on both top and bottom elements rotate the switch clockwise With the switch in either position __ the green pilot light will illuminate T Top Element Top and Bottom Elements The Energy Regulator cycles power to the elements With the dial set to high the elements are constantly on providing maximum heat Any other setting on the dial will vary the on off cycle time in turn varying the total heat produced by the machine With the dial set to off no power will be applied to the elements The on off state of the
21. r supply ensure that all the controls are in the OFF position For the GMX610 GMX810 and GMX810G plug the grill into a standard single phase 10Amp power point For the GMX815 and GMX1515 plug the grill into a standard single phase 15Amp power point Always ensure the power cable is not in contact with hot parts of the toaster when in use and have any damaged power cord replaced immediately We recommend the use of an RCD Residual Current Device rated at not less than 30mA for circuit protection when using these units Note that if one RCD is used to protect multiple socket outlets the RCD shall be appropriately rated so as to allow up to 30mA from these machines alone Any damage caused to adjacent surfaces or equipment as a result of the unit being too close will not be covered by warranty Roband recommends a minimum gap of 100mm be maintained all around the unit to allow adequate ventilation and to prevent any damage to heat sensitive materials We recommend the use of an RCD Residual Current Device rated at not less than 30mA for circuit protection when using these units Note that if one RCD is used to protect multiple socket outlets the RCD shall be appropriately rated so as to allow up to 30mA from these machines alone ROBAND AUSTRALI A SPTYUD Page 3 OPERATION All models of toasters are capable of toasting and grilling on both sides at once or on the top only They also have the flexibility to be c
22. re protected by one RCD having a rated residual current not greater than 30mA consideration should be given to the number of socket outlets protected and the nature of electrical equipment likely to be connected to the socket outlets Tubular elements such as those used in this unit reaching temperatures greater than 110 C are subject to moisture absorption and therefore earth leakage current generation Should the installation and use of this unit trip an RCD the unit will need to be run on a circuit without an RCD for approximately 30 60 minutes after which time the elements should have dried out and the machine should function normally If you are unable to locate a circuit without an RCD please contact your supplier or contact Roband or our Agent for alternative suggestions ROBAND A US T RA LIA PTYUD Page 15 NOTES This page is intentionally left blank ROBAND Page 16 AUSTRALI A PTYUD NOTES This page is intentionally left blank ROBAND AUSTRALI A PYD Page 17 NOTES This page is intentionally left blank Please note your favourite settings here ROBAN D Page 18 AUSTRALIA PYD EC DECLARATION OF CONFORMITY Roband Australia 1 Inman Rd Manufacturer Cromer NSW 2099 Australia Model T Grill Max Toasters GMX6 GMX8 amp GMX15 See Typs Series Toasters Date I first CE 1st Sep 2010 Marking GMX610 GMX810 GMX815 GMX810G Specific Models GMX1515 Includes export mod
23. sture we are trying to get rid of Day old bread will prevent most of the problems but there is one complaint that cannot be solved quite so easily If the toasting is uneven front to back this is in a grill toaster then you do not have an easily rectifiable dilemma As with the Grill you all use at home the toast in these machines will always toast faster at the back than the front The reasons for this are obvious when you think about it the rear of the grill is closed the front is open so you lose a lot more heat out of the front than out of the back In designing larger units the rear elements are installed closer to the food product but with differences in the expansion contraction of the elements in each unit coupled with varying environmental factors such as air conditioning it is impossible to build a unit that will perform identically in all surroundings Once these units are in situ however and have had a chance to burn in it is possible to bend the stee elements when they are COLD slightly toward or away from the toasting rack to fine tune performance In the majority of cases the differences in the degree of toasting are so small as to not warrant the effort but it is an option worth considering nonetheless If you have a need to fine tune the toasting of any steel element toaster if the elements are glass you will not be able to achieve this fine tuning please contact our engineering department for a little advi
24. tive equipment leaves our factory and all goods manufactured by us are guaranteed against defective workmanship and materials for a period of 12 months from the date of purchase Roband Australia s obligations pursuant to this express warranty being limited to the repair or replacement of the defective goods or materials at is option and subject to the terms contained within this Warranty statement Where relevant glass Teflon amp and lamps are not included in this warranty and RCD tripping due to moisture absorption by Tubular Heating Elements is not considered a warranty fault Generally all goods claimed under this warranty must be returned to the factory or an authorized service agent freight prepaid for inspection All parts deemed to be defective will be replaced however no claims will be entertained for second hand products or parts damaged in transport misused or modified in any way without our approval For machines that are not considered to be portable e g food bars rotisseries large hotplates and some bain maries on site warranty service will be provided in capital city metropolitan areas only In all other locations the customer is responsible for all travelling time service call costs and payment for this will be required prior to the commencement of the repair The labour costs to actually repair the fault will be met by the company Any repairs or replacement of defective goods or materials pursuant to this warranty must be
Download Pdf Manuals
Related Search