S 8862A 9” LCD Digital Portable Television With HD Tuner.
Contents
1.2. an internal rechargeable battery that is not removable Whenever the TV is connected to either the AC power adapter or the car lighter adapter the battery will commence charging even while the TV is operating A full charge will be reached within a few hours and will provide about two hours or at most three hours of continuous operation depending on screen brightness settings When BATTERY flashes in red letters in the top left corner of the screen the TV has about five minutes more of operation before shutting down When this icon appears on the screen connect the TV to an external power source if available To protect the internal battery please never overcharge any fully charged battery It is normal for the battery to get hot after charging But if the temperature reaches over 60 degrees C while charging something is wrong with the battery Please remove the power adapter and take the unit to an Altronics service centre for a professional check If the battery is charged under high temperature conditions it will not be charged fully Suggest charging it between 15 25 degrees Celcius ambient temperature for the best result For long periods of not using the device over 3 months in storage please fully charge and discharge the battery at least three times to preserve the battery life 6 FIRST TIME SET UP After your device is connected to a power supply and switched on for the first time after purchase the S 8862A will implemen
3. an unauthorized power supply pack Check to see if the TV set is on standby status No image Depending on location it may be necessary to rescan for available TV channels in that area Check antenna If using telescopic antenna change to external antenna No sound Check the volume setting and verify that the earphones are plugged in properly Check the audio system settings in AV mode Dark picture Adjust the brightness and or contrast settings Low temperatures can affect the screen Unclear or unstable image Weak TV signal adjust antenna orientation or move to another location inside or outside the building Snow or hazy image Interference due to the operation of electric motors nearby passing trains high voltage lines or neon lights Upside down or inverted picture Improperly adjusted horizontal or vertical screen tracking con trol Check settings under rotating images Signal search failure Check Country and region settings Pixelated image intermittent weak signal Check antenna No Signal Message Receiver cannot detect a signal for that channel Check antenna No Information message Weak Signal and station program information is not being decoded or there is no program info to display Page 13 DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner 13 SPECIFICATIONS LCD Screen LCD screen size Response time Contrast ratio Resolution Viewing angle Brightness Illumination D
4. guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure CAUTION This appliance is not intended for use by persons including children with reduced physical sensory and mental capabilities or lack of experience or knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety Children should be supervised to ensure they do not play with the appliance Disclaimer For repair or service please contact your place of purchase Under no circumstances should you attempt to repair the player yourself or via a non authorised Altronics service centre as this will invalidate the warranty During the warranty period we undertake to repair or replace your product at no charge if found to be defective due to a manufacturing fault The warranty excludes damage by misuse neglect shipping accident incorrect installation or no fault found NOT FIELD SERVICEABLE Page 15 DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner Distributed by Altronic Distributors Pty Ltd Phone 1300 780 999 Fax 1300 790 999 Internet www altronics com au Page 16
5. orders a Ringing us on 1300 797 007 and quoting your tax invoice number b Upon contacting Altronics we will issue an R A Return Authorisation As Altronics have a number of service agents throughout Australia a copy of the R A will be emailed faxed or mailed to you with full instructions of how and where to send the goods The freight for shipping goods back to Altronics for all repairs is at the customer s expense C A copy of the R A form or at the very minimum the R A number must accompany the goods to effect the repair d Altronics will pay the return freight to the customer where the warranty claim has been accepted e Please quote the R A number in any correspondence to us 2 FOR OVER THE COUNTER PURCHASES to make a warranty claim please return the goods to us in any of our stores with a copy of your proof of purchase tax invoice a Upon leaving the goods at one of our stores an R A number will be issued to you b Once repaired you will be contacted advising that the goods are ready to be collected from the store It is at Altronics discretion as to whether the goods will be repaired or replaced whilst under warranty and as to whether identical goods will be used to replace the item due to changes of models products Note Under no circumstances should you attempt to repair the device yourself or via a non authorised Altronics service centre as this will invalidate the warranty Our goods come with
6. 3 16 9 Aspect ratio External antenna input jack headphone jack audio video AV input output jacks DVB T AV output jack external power input jack 7 4V 1300mAh Approx three hours usage fully charged Not user removable NOTE Usage time is dependent on the screen brightness setting DC 12V 12V 1 12A z10W Stand remote control 12V AC DC adapter car adapter AV line Manual External Antenna 5 40 C 262mm L x 158mm W x 24mm H 625g DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner 14 WARRANTY Altronic Distributors warrants this product for one year from date of purchase from Altronics or its resellers to the consumer If this item is part of an installation or another product please contact the installer or supplier for your warranty During the warranty period we undertake to repair or replace your product at no charge if found to be defective due to a manufacturing fault The warranty excludes damage by misuse or incorrect installation i e failure to install and operate device according to specifications in the supplied instruction manual neglect shipping accident or no fault found nor by use in a way or manner not intended by the supplier For speakers misuse includes burnt out voice coils For repair or service please contact your PLACE OF PURCHASE If this item was purchased directly from Altronics please make a warranty claim by 1 FOR MAIL ORDER CUSTOMERS includes school and trade
7. DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner S 8862A 9 LCD Digital Portable Television With HD Tuner Operating Instructions Imported exclusively by Altronic Distributors Pty Ltd Revision 18 08 2014 DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner TABLE OF CONTENTS Tec FOAMS acd sedes Pebble natuieoauiesmahedenamaeoauesnaeedenseaor 2 2 Features Inside the BOX eeeeeeeeeeseeeeeennnnnnnnnns 3 SNB eI e NR 4 4 Connection of Main Interfaces s 9 5 Battery Operation eeeeee nnne 6 6 First Time Set UD icc eceeet etr E ete VHREEEEREYH REEF FERE EEHRR FERES 6 7 Description of Remote Control Buttons eeeeeees 7 8 DIV Main Operation Menus mH 8 9 9 USB Flash Drive Operation Menus 10 11 10 PVR Functions ssseIn 11 12 LL Sorte DEC sese td I DONDE bi UDIN DD UDIN DU NONU 12 12 Trouble Shooting oo cece cece cccccccccccccccceeececceceeeeeeeeseeeeeeeeeeess 13 De Specifications sineitwnsincdtosbencdet bine duns inches bine DU iedit ieiti iiit 14 14 Warranty Information uucuscsesesesexosendet uit nca cacao nae cana 15 1 PRECAUTIONS A Storage Keep this product away from extremely hot or cold places The storage temperature ranges from 20 C to 60 C and the working temperature from 5 C to 40 C Do not use this product in o
8. VB T System Input frequency Input Voltage Input Resistance Input code rate Tune Input code rate COFDM Modulation COFDM Bandwidth COFDM FFT mode MPEG Il Decode Video standard HD Input code rate Audio standard of decode Audio output mode USB Media Flash media Audio Video Picture Record function General OSD language Audio output Video Input Picture display mode Connections Internal battery Car power adaptor AC adaptor DC Output Power consumption Included accessories Operating temperature Unit dimensions Weight Page 14 9 TFT LCD 17 8cm 16 9 ratio R 10 F 20 milliseconds 300 1 800 H X RGB X 480 V U 40 D 60 R L 60 200cd m2 LED backlit VHF 177 5MHz 226 5MHz UHF 474MHz 858MHz 80dbm to 20dbm 75 Ohm 4 98 31 67 Mbit s 8MHz band width 4 98 31 67 Mbit s 8MHz band width QPSK 16 QAM 64 QAM 7MHz amp 8MHz 2K 8K MPEG1 MPEG2 MPEG4 H 264 DivX 3 x 6 x HD H 264 HD 10801 JPEG support 422 411 420 444 440 format Max 60Mbit s MPEG1 MPEG2 LAYERI II AC 3 E AC 3 AAC HE AAC level 2 amp level 4 MP3 Stereo double sound track left and right USB 2 0 or earlier WMA MP3 M4A MPEGI MPEG2 MPEG4 H264 Motion JPEG JPEG BMP PNG PVR record Can record from EPG English German French Italian Spanish Portuguese etc Speaker output 0 5Wx2 Earphone output lt 15mW 1 0mVp p 75 ohm with AV converter cable 4
9. al Portable Television With HD Tuner 8 4 Time Time Offset Use cursor controls to select Auto or Manual Choosing Manual may be necessary if the Auto setting is showing a time zone that does not correspond to your own Choosing Manual will cause the Country Region option to become faded on screen thereby rendering it impossible to change that parameter Country Region With Time Offset on Auto change the region name to your region The Time Zone should automatically change to the correct time zone with respect to GMT i e UTC Universal Time Coordinated Time Zone This will be able to be changed only when the Time Offset is set to Manual control Daylight Time Switch on to add one hour for daylight savings or summer time Default setting is off 8 5 Option OSD Language Use the cursor controls to choose the language of the menus and functions for On Screen Display English is default Subtitle language Choose the language in which subtitles appear during TV broadcasts where available Default setting is OFF and there are about 20 languages to choose from Audio Language Choose from a range of languages in which to hear your TV broadcasts Default is English Configure according to the language supported by the signal 8 6 System Parental Guidance Use the cursor to select this option and set an age limit on what programs can be accessed from the TV A six digit password is required to activate the parame
10. categories Movies News Sport Music Disable EPG Electronic Program Guide See Section 10 of this manual for a description on how to operate the PVR SORT Sorts the channel listing by various parameters LCN default ONID Service Name Service ID which are selected using the cursor buttons LCN Logical Channel Number Use the left right cursor to select ON or OFF 8 2 Picture Aspect Ratio Use cursor to select 16 9 Wide Screen default 4 3 Full 4 3 Pan amp Scan 4 3 Letterbox and confirm by pressing OK button Resolution 1080i default and auto adjust to lower resolutions TV Format Select either PAL or NTSC PAL is suitable for Australian TV 8 3 Channel Search Autosearch Use cursor to select this option and press OK The TV will auto scan for channels and add any new channels found to the channels list Manual Search This option allows manual channel tuning Some knowledge of the channel frequencies in use in your area is required for this to be utilized effectively Autosearch is recommended Country Choose the country in which you are located This should probably be done before Autosearch or Manual Search functions Improper configuration may lead to signal reception failure Antenna Power Switch it to ON or OFF default setting It is unlikely that this will need to be on AA AA AL Page 8 DYNALINK amp S 8862A 9 LCD Digit
11. ct parameters to change The most comprehensive menus are available under DTV mode Use the VOL or VOL buttons to adjust each parameter to a suitable level Page 4 5 EXIT Return button Press to cancel a function or exit a menu or sub menu 6 TFI LCD screen LED Backlit 7 CH a Under TV mode press as Channels up under OSD MENU or CARD mode press as upward key or next track 8 CH w Under TV mode press as Channels down under OSD MENU or CARD mode press as downward key or previous track 9 OK Under DTV mode and USB operation press as confirm or select button While watching DTV press OK to see channels list and use CH or CH to scroll down or up that list to select a TV channel 10 VOL Press as Volume level increase during normal operation Under MENU modes press as a right selection key or cursor In DTV MENU keep pressing for three seconds to again activate the audio volume increase function 11 VOL Press as Volume level decrease during normal operation Under MENU modes press as a left selection key or cursor In DTV MENU keep pressing for three seconds to again activate the audio volume decrease function 12 Loudspeakers DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner FIGURE 2 Rear and Side Panel Antenna input socket PAL socket for external antenna Battery Cover battery is not user removable Mounting bracket fixture slot Headphon
12. dia devices such as card readers portable hard drives MP3 MP4 players It is design for USB Flash drives only If the USB does not work properly when inserted into the appropriate slot remove it and try again a few seconds later Remember The transport controls lt gt gt gt 6 W gt are only available from the remote control When the buttons are pressed the corresponding icons appear on the screen 9 1 Multimedia Use the cursor to select this parameter and press OK You will enter the USB playback options menu consisting of Music Photo Movie PVR Use the cursor to choose a function and press OK to activate The menu screen includes On Screen Display OSD prompts on the bottom of the page to make navigating sub menus easier When playing movies or music and you press transport control buttons like gt gt the control icon will activate in the display window and the track will Fast forward 2x press again to get 4x and press again and again to get up to 32x FF speed The same is true with Rewind Press the same button again after 32X or press Play to revert instantly to normal speed playback e n Photo playback mode press the PLAY or OK button to start a slide show presentation of all the photos listed in the left column e n Movie playback mode once a video file has commenced playback press the blue button on the remote control to see the video in Full Screen
13. e Jack USB interface AV OUT to connect to a second monitor enables daisy chain for multi panel playback AV IN To Play DVD from external DVD player Power switch DC power in 12V 0 0 400 5 ON Z 4 CONNECTION OF MAIN INTERFACES 4 1 Connection of Power Supply Connect the AC power adaptor or the car adaptor to the DC input on the TV unit number 9 on Fig 2 4 2 Connection of Antenna cable An external PAL socket is provided number 1 on Fig 2 for connection to an external antenna either for the antennas supplied or the PAL connection from a roof antenna 4 3 Connection of AV conversion cable AV IN AV OUT This portable TV includes a composite audio visual cable adapter that can connect to the AV Input or the AV Output socket Plug the AV conversion cord into the appropriate jack on the side of the TV Then plug the RCA jacks into the corresponding colour output sockets Yellow Video Red White Audio on the external device i e such as a DVD player or a second TV monitor or PVR The images and audio from the external AV source will appear on the TV when using the AV IN Likewise the images and audio from the S8862A source will appear on the other TV screen or will be transferred and recorded onto the external recording device when using the AV Out Page 5 DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner 5 BATTERY OPERATION This portable television set is fitted with
14. ecording Press the EPG button on the remote control or select EPG from the Program menu and press OK The screen will display the programming information list provided by the station transmissions A user can change the channel while the EPG is displayed by pressing either the left right cursor buttons Use the cursor control to select a channel and also the program from the EPG listing you wish to record Follow the OSD prompts at the bottom of the screen to perform various functions Press OK to BOOK the program for future recording It will be added to the Booking list which can be viewed by pressing INFO button The Booking list can be edited as needed adding new programs deleting bookings changing the times of bookings etc using the coloured buttons on the remote control Favourite programs can recorded at a regular time as a series on a daily or weekly basis Press INFO on the remote control to see which programs have been Booked as recording events i e Book List Page 11 DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner 10 3 Timer Recording Press the EPG button on the remote control or select EPG from the Program menu Press INFO to open the Booking List Press the Red button to ADD a new booking for a recording event Enter the required information according to the Event menu displayed and press OK to confirm the booking or Exit to cancel it Once the details have been programmed the event w
15. g USB playback operations for music photos movies PVR recordings see Section 10 26 Fast Forward 27 TEXT Activate Teletext feature if transmitted by that station Use cursor controls to scroll up or down text pages Press button again to turn Teletext off 28 0 Record to USB stick from a DIV program 29 lt Previous Track 30 Next Track 31 Bl Stop playback 32 Play Pause button o0 e6e9060000 099090099006 9990000000 900 rS E 29 30 3T 32 Page 7 DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner 8 DTV MAIN OPERATION By pressing the MENU button on the Top Panel or the remote control while in DTV mode the user is presented on screen with several menu options PROGRAM PICTURE CHANNEL SEARCH TIME OPTION SYSTEM USB The following section maps out the menus and the parameters that can be changed 8 1 Program Menu Program Edit The user must enter the password for this feature to function The password is 888888 Show Program Edit screenshot somewhere here This feature allows a user to edit the program channels The four coloured buttons on the remote control function in this mode as follows there are prompts on the screen for this e Red Move channel up or down the list e Green Skip channel e Yellow Lock channel e Blue Delete channel from the list FAV Mark channels as FAVOURITES under five
16. ill be added to the Booking list which can be viewed by pressing INFO button The Booking list may be edited as needed adding new programs deleting bookings changing the times of bookings etc using the coloured buttons on the remote control 11 SOFTWARE UPDATE VIA USB INTERFACE From time to time the manufacturer might upgrade the operating software for the TV tuner in order to improve functions and or fix bugs The software upgrade file itself would need to be downloaded from a website and stored in the root directory of the USB Flash drive Contact the retailer for information about where to get the software Then follow these steps 1 Plug the USB drive carrying the update file in the root directory into the USB interface of the receiver 2 Press MENU Choose the SYSTEM sub menu select Software Update and press to start upgrade process While the upgrade progresses the LCD will show the percentage completed At 100 the update will be finished and you can remove the USB flash drive as instructed 3 The receiver should reboot at the conclusion of the software install To ensure that the upgrade has been successful please do not remove the USB drive from the receiver and or power off the receiver during the process Page 12 DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner 12 TROUBLESHOOTING No Picture No Sound Check to see that the AC adapter or car adapter is properly connected Do not use
17. ime elapsed etc Sizes range from NORMAL default BIG SMALL e Subtitle Background Background colours for subtitle text include Transparent default Grey YellowGreen White e Subtitle Font color Actual colour of the subtitle text including Red Blue Green White Black 9 4 PVR Configure Allows you to set parameters controlling the PVR function both for recording and playback under the Multimedia submenu e Record Device Tells the type of media format how much memory capacity is used up and how much recording Space remains on the inserted USB flash drive e Format Use the cursor controls to select this option to format the inserted USB stick Choose the format type FAT 32 recommended Remember that formatting the USB drive will remove all data currently stored on it 10 PVR FUNCTION The USB PVR function allows a user to record and playback TV programs Instant recording EPG recording and timer recording are available The TV can be in Standby mode and the EPG event programming will awaken the receiver in order to record or view the show that has been booked 10 1 Instant recording Press red REC button on the remote control to start instant recording during the transmission of a TV program The recording symbol will display on the top left quadrant of the LCD Press INFO to get further information about recording as it progresses Press STOP to halt the recording 10 2 EPG R
18. isplay electronic program guide only available under DTV mode Use EPG to set up PVR 20 recording functions using a USB stick for program 21 storage 22 9 LIST In DTV mode recalls the TV program list on screen Use up or down cursor to scroll 10 INFO Press to display channel and program information while watching TV shows 11 OK Confirm Select 12 CH A Channel selection cursor up 13 CH Channel selection cursor down 14 VOL Volume up cursor right 15 VOL 4 Volume down cursor left 16 AUDIO Sound track switch for audio language and mono or stereo listening 17 MENU Press to open main OSD menus 18 TV RADIO Press this button to switch between TV and Radio channels in DTV mode 19 EXIT Press to cancel a function or exit current sub menu and return to main menu or TV viewing 20 RED GREEN YELLOW BLUE Corresponding menu function see Section 9 21 P ADJ Picture adjustment only activates these functions in DTV mode and during USB playback BRIGHT CONTRAST COLOUR UP DOWN MIRROR 16 9 RESET Use the left or right cursor to adjust these picture settings 22 PICT Picture mode press for STANDARD SOFT VIVID LIGHT PERSONAL 23 SUBTITLE Press to turn ON OFF the available multilingual subtitles 24 SLEEP Selecting the switch off timer up to 120 minutes 25 4 4 Fast Rewind Note These transport controls are used durin
19. ith cable Larger magnetic base antenna with cable Remote control with C2025 type battery Mounting Bracket for TV with adhesive plate Lari CD COLOR DVB USg READER MONITOR S 8862A is supplied with a magnetic base car antenna with 1 2m lead Page 3 DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner 3 TV APPEARANCE 5 7 4 8 3 9 2 10 l 11 12 FIGURE 1 Front Panel 1 Power charge LED indicator No light Main switch is off no TV operation with or without power adapter connected No Light Main switch is on if battery is charged TV operation is possible ORANGE Main switch is on no TV operation but internal battery is charging and device is in standby mode GREEN Power on and battery charging with adapter connected RED Full charge reached in standby mode Press POWER button and light goes out TV comes on RED Flashing Shows battery capacity has dropped and needs recharging Note Charging function is not available in power off mode 2 Remote control IR receive window 3 POWER MODE Places the TV into Standby power Hold the button until the monitor turns off A simple quick press of this button will change the mode of the TV toggling between AV and DVB T modes 4 MENU Press to open main OSD This button activates different sub menus depending on the mode in which the TV is operating Use the cursor control buttons to move through the different sub menus and sele
20. mode press again to revert to Preview mode e n Photo and Movie playback full screen modes press the INFO button on the remote control to display a window on screen stating the essential track information e PVR mode will allow you to select and play supported format video or delete or rename these recorded video files stored on the USB 9 2 Photo Configure Allows you to set parameters controlling the slide show presentation in Photo playback mode under the Multimedia submenu e Slide time from 15 seconds to 85 seconds default 25 seconds per slide e Slide Mode Random default transition styles or a choice of 59 unique transition styles Random will randomize the transitions from one slide to the next among all 59 styles making for a more interesting slide presentation e Aspect Ratio Keep aspect ratio of slide photo default or Discard aspect ratio which means the photos will be forced to fit the screen aspect ratio This could result in a highly distorted image Page 10 DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner 9 3 Movie Configure Allows you to set parameters controlling the Movie playback under the Multimedia submenu e Aspect Ratio Discard default or Keep e Subtitle Specific Sets the size of the subtitle font that appears on the bottom edge of every movie during playback This subtitle carries information about the playback such as t
21. r near damp environment like bathtubs wash basins kitchens washtubs basements or swimming pools Do not expose your TV set to high humidity dust or oil smoke Do not throw or drop or knock this product Do not subject this device to strong vibrations Do not scrub this product with abrasive materials B Maintenance Disconnect all cables from this device before cleaning Wipe the enclosure screen and keys using soft cloth with a little mild detergent on it Do not use polishing chemicals any type of propellant or detergents like alcohol and benzene to clean your device Note Bright spots or dark spots may appear on the screen This is a normal phenomenon associated with the active matrix display technology and is not a sign of malfunction Page 2 DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner FEATURES Rechargeable battery operation about three hours operation on a full charge DVB T digital High Definition TV tuner with small magnetic base antenna with cable TFT 9 LCD screen with HD resolution External antenna for improved reception AV IN socket for composite video plus stereo audio input as a source AV Out to display whatever is playing on screen on an external screen i e daisy chain TVs together USB Playback and PVR function Plays photos movies music from USB Flash Memory Inside the box Car adapter 12V DC power adapter AV cable Small magnetic base antenna w
22. t an Installation Guide protocol The following three options will appear OSD LANGUAGE English is default COUNTRY Set according to you location Improper configuration may lead to signal reception failure CHANNEL SEARCH After choosing the language and country settings using the cursor arrow buttons select CHANNEL SEARCH and press OK The TV will automatically scan through the channel frequencies and store the working channels in memory Once the digital stations have been stored into memory you can commence viewing the TV programs of your choosing NOTE This same process will be initiated after a user activates a factory reset which will clear all stored channels and other settings If the television has no channels stored it will engage the Auto Search Page 6 DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner 7 DESCRIPTION OF REMOTE CONTROL BUTTONS Some functions here listed are described in Section 4 1 STANDBY power On Off button 2 MODE Press to switch between DTV AV 3 SEARCH Press and hold button to commence automatic search for TV channels MUTE Turn audio off and on 0 9 Enter number s corresponding to TV channel 6 amp Return button go back one operation or step within a menu Also switches between two channels in DTV modes bom e 000000 2 e oz o 7 FAV Use to call up favourite channels in DTV mode 11 to 15 see Section 9 17 8 EPG Press to d
23. ter and once entered you can set the age from 4 to 18 Factory default password is 888888 Default setting is OFF Make your choice and press OK to confirm Set password Use this to set or change the password number for access to the primary TV functions and to alter the Parental lock setting Factory default password is 688888 Input the old password and then a modified password and confirm the new one Please remember the password you have entered Restore Factory Default This will delete all stored channel frequencies from the TV memory and place all parameters back to the factory original settings including the password Use the cursor controls to select this option and press OK To proceed with the reset press OK again otherwise press EXIT Information Details of the Model SW Version and HW Version for this TV Software Update Install new software via USB stick See Section 11 for more detail Page 9 DYNALINK amp S 8862A 9 LCD Digital Portable Television With HD Tuner 9 USB FLASH DRIVE This TV via the USB socket is able to read and play many different file formats as summarised in the chart below OMM do edis aii qudd Ph IPES BMP PNG audio compressed format The device has been successfully tested using a 4GB USB stick inar mpar maa Note This TV is able to play video from media pause when the data stream is above 1000KBP S The USB socket of this device does not support multi me
Download Pdf Manuals
Related Search