USER MANUAL
Contents
1. Sound Mode There are five preset settings to choose from Standard Music Movie Sports and User Note Treble and Bass can only be adjusted in User mode Treble Adjust the relative intensity of higher pitched sounds Bass Adjust the relative intensity of lower pitched sounds Balance Adjust the balance of the left and right sound track or turn off the volume of the left or right sound track Auto Volume Control the volume of the program automatically Turn on the function by selecting Surround Sound Turn on off the surround sound function by selecting off on SPDIF MODE Select from the following options Off PCM and Auto 17 OSD Menu i 5 Q 5 Operation Recording Operation Maintenance and Service OSD Menu p E 5 Operation Recording Operation Maintenance and Service OSD Menu 4 TIME menu This menu allows the user to change the time settings of the unit Description Clock Use the lt and gt buttons to select the position and V and A buttons to set the time NOTE The time cannot be changed manually in DTV mode because the clock is synchronised with the broadcast signals received Off Time Press the OK button to enter the submenu to set the time and frequency for the TV to turn off automatically On Time Press the OK button to enter the submenu to set the time and frequency for the TV to turn on automatically2. OSD Menu The purpose of these precautions is to ensure user safety and prevent property damage Be sure to read and observe all safety precautions Se ION Es g 5 so It is the responsibility of the user to make sure all precautions and warnings are heeded and followed Recording Operation Maintenance and Service User Guidance OSD Menu S 9 ES g 5 so Recording Maintenance Information Basic Operation Operation and Service Installation 1 LL D DO NOT place containers with liquids such as vases drink cans bottles or small metallic objects on top of the unit If liquid enters the unit or any metal object falls into the unit it may result in a short circuit fire or electric shock 6 DO NOT place a burning candle burning incense or lighted cigarette on top of the unit DO NOT place the unit near any heat source such as a fire place or space heater e Doing so poses a serious risk of overheating and a possible fire outbreak S i Install the unit at an adequate distance from the wall to ensure sufficient ventilation Insufficient ventilation may result in the unit overheating which may cause a possible fire outbreak ventilated enclosure such as a cabinet e Doing so poses a serious risk _ of overheating and a possible fire outbreak DO NO
3. Description Press the MENU button once to enter CHANNEL setup menu as shown above Press OK to enter the submenu In the CHANNEL setup menu press the V A button to select the desired item Press the MENU button to return to the previous menu Press the EXIT button to exit E a o le Auto Scan Auto Scan Press OK to enter the auto scan option Select the desired Country and Tune Type Country ws iy using the lt gt toggle buttons then press OK to avc start scanning fecic F Move Select fear Exit i 5 Q 5 Operation NOTE If ATV DTV option is selected the first 50 of the scan will be for ATV tuning while the second half would be for DTV tuning If desired the user has the option to exit the tuning process midway by pressing the EXIT button Recording Operation Maintenance and Service 13 OSD Menu p E Operation Recording Operation Maintenance and Service OSD Menu DTV Manual Tuning Press the OK button to enter the DTV Manual Tuning menu DTV Manual Tuning Select a DIV channel and press OK to start searching NO SIGNAL Bad Mammal Gond BHREHEHRHREHRHEHEHRERB RE RR Eee ees a ea Quit ATV Manual Tuning Press the OK button to enter the ATV Manual Tuning ATV Manual Tuning menu Sa ae ca Current CH Select the channel you want to tune Color System Color Sound System Select a TV system f
4. When removing the batteries _ from the remote control make _ sure children do not swallow them Keep the batteries out of the reach of infants and children e If a child has swallowed battery seek medical attention _ immediately Do not display still images and partially still images on the LCD panel for more than 2 hours as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention reduce the degree of brightness and contrast of the screen when displaying a still image Watching the LCD TV in 4 3 format for a long period of time may leave traces of borders displayed on the left right and centre of the screen caused by the difference of light emission on the screen Playing a DVD or a game console may cause a similar effect to the screen Damages caused by the above effect are not covered by the Warranty Displaying still images from Video games and PC for longer than a certain period of time may produce partial after images To prevent this effect reduce the brightness and contrast when displaying still images User Guidance Information Basic Operation OSD Menu Se 9 E d Es g 5 so Recording Operation Maintenance and Service Important Safety Instructions Warnings and Precautions To prevent any injuries the following safety precautions should be observed in the installation use servicing and maintenance of this
5. Accessories Remote including power adaptors AV box TV tuners etc are warranted to be defect free for 1 year Replacement of spare parts under normal usage except cabinet front panel knob removable accessories battery consumable AC cord connecting cord and other accessories are warranted as specified in Warranty Periods Table and will be repaired or replaced at the sole judgement of TEAC The warranties hereby conferred do not extend to and exclude any cost associated with the installation deinstallationor re installation of a product be it in home or otherwise including costs related to the FINA Ld 4 D E JJ z Prev Page Next Page Prev Next Stop Music Playlist Press lt gt button to select the option on the table and press OK button to change Prev Next page Turn to previous next page of the text Prev Next Turn to previous next file Stop Stop auto turning pages Music Play pause the music program Playlist Display the playlist on the screen Info Display the information of the text To exit the multimedia and return to normal viewing press the INPUT button and select viewing input according to your personal choice 25 i 5 Q 5 Operation Recording Operation Maintenance and Service Multimedia Operation Supported Formats MOVIE The max bitrate is 6Mbps The max resolution is 720x576 pixels AVI Mono colour 16 colour 256 colour 16 bit 24 bit 32 bit Th
6. as well as the desired volume and channel Sleep Timer Set the time span before the unit goes to sleep from the following selections 10min 20min 30min 60min 90min 120min 180min 240min and off Auto Sleep Turn the automatic standby function on off When activated the unit will switch to standby if it has not received any signal input for an extended period of time Time Zone Select the time zone 18 OSD Menu 5 OPTION menu The option settings allows alterations to the language and regional settings OSD Language Audio Languages 15t Audio Languages 2nd Edi ME P Lst Subtitle Languages znd 050 Duration Description OSD Language Select the language option for the OSD menu Audio Language 1st 2nd can be selected in DTV mode Allows you to select first and second audio language Subtitle Language 1st 2nd can be selected in DTV mode Allows you to select first and second subtitle language OSD Duration Set the time of the menu display on screen for the following time durations 5s 10s 15s 20s 25s 30s 35s 40s Blue Screen Turn on off the blue screen Country Displays currently selected country It can be adjusted during Auto Tuning Auto Software update Your LCD TV has been tuned for optimum performance however from time to time we may release new unit software to improve the performance Turning on this option will allow the LCD TV to automatically detect and pop up a message when new so
7. cannot be used for playback Hard disk drives CD DVD Drives and other devices connected via USB cannot be used e This unit cannot copy or move files e Playable formats FAT12 FAT16 FAT32 Depending on the condition of the USB flash drive this unit might not be able to play the files on it or skipping might occur NTFS HFS and HFS formats are not supported and cannot be used Max number of playable folders 200 Max number of playable files 999 If the USB storage device contains more than 999 files or 200 folders this unit cannot play it back correctly This unit cannot play files that are larger than 2GB e Files with variable bit rates might not play correctly File information display e The display of this unit can only show single byte letters and numbers e f the file information contains Japanese Chinese or other double byte characters playback is possible but the name will not be shown correctly 21 im E Operation Recording Operation Maintenance and Service Multimedia Operation Basic Operation 1 Press the INPUT button on the remote control to display the input source menu select USB source by the lt gt buttons and press the OK button to enter the Multimedia menu as illustrated below Input Source Move ox Select Exr ouit 2 When a USB device is attached to the system you will find the name of the device displayed on the screen MAIN MENU SELECTION
8. equipment Before operating this equipment please read this manual completely and keep it nearby for future reference 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Clean only with a dry cloth 6 Do not block any of the ventilation openings Install in accordance with the manufacturer s instructions 7 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Basic Operation 8 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the power socket OSD Menu 9 Do not bend the power cord excessively Prevent the cord from being walked on or pinched by weights placed on it Se 9 ww ES g 5 so 10 Only use the attachments accessories specified by the manufacturer 11 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus us Recording Operation Maintenance and Service Important Safety Instructions 12 Unplug this apparat
9. may run on a different program that is not compatible with the unit USB Disk If a compatible USB drive is attached PASS will be displayed If the USB device is found to be faulty or incompatible with the unit FAIL will be displayed please refer to note above If no device is attached the option will appear grey Format The USB Storage device will need to be formatted before being used for Recording functions to ensure the USB device connected is been format in FAT32 file system and that there is sufficient storage space available for recording programs Once FORMAT is selected the following prompt will appear as shown in the figure Choose the file system type FAT32 is best for High Speed USB storage device High Speed FS is best for Low Speed USB storage devices File System Size DVR File System 4 m PF DVR File System Size 4 ALL NOTE 1 After formatting into FAT32 file system you SD104 Mins Will still be able to store and share other media Tua wo Wil files on the same USB storage device ees 2 Storage devices formatted in High Speed FS Mave T Select system can only be used to record video on this TV and cannot store other media files Time Shift Size After the USB storage device is formatted into FAT32 file system Time Shift cannot be altered During DVR File System Check the display will show that the whole storage device space will be used for Tim
10. power is On 2 Check that the batteries of the remote controller were loaded properly 3 Check to see if any obstacle exists between the LCD TV and the remote control then remove it if any 4 If the batteries have no power replace them with two new batteries Compression of video contents may cause distortion especially on fast moving pictures such as sports and action movies Low signal level can cause picture distortion This is not a TV issue Have the antenna assessed Please check if the USB is connected properly Please make sure USB disk is compatible and the multimedia data formats are supported see Specifications page 34 Specifications 1 USB2 0 See the table on next page WUXGA Maximum supported resolution 1366X768 60Hz 458x160x349mm 573x160x411mm 458x53x307mm 573x55x369mm 3 25kg 4 45kg 100x100mm 100x100mm M4X10 Input Connector AUDIO L R PC AUDIO HDMI R F Output Connector HEADPHONE come e Specifications are subject to change without notice Weight and dimensions are approximate 35 0 40 C ww Specifications Supported Formats MOVIE The max bitrate is 6Mbps The max resolution is 720x576 pixels AVI Mono colour 16 colour 256 colour 16 bit 24 bit 32 bit The max PHOTO resolution is 3000x3000 pixels min resolution is 100x100 pixels M
11. unit on 1 Connect the television unit to the antenna wall socket using a coax television cable Connect any other external devices that will provide video input to the television 2 Using the provided power adaptor connect the television unit to an available power source WARNING Make sure the power output from your power source matches the power input labelled on the television adapter 3 Press the POWER button on the remote control or on the television panel 4 he on screen television display should appear Selecting an input source The unit incorporates multiple input sources which can be selected via the INPUT button on the television panel or DV remote control The following steps explain the procedures involved 1 Press the INPUT button to enter the Input menu The screen will display the Input Source menu 2 Use the CH button on the TV set or V direction buttons to select the desired input source USB 3 Press OK to enter the selected source Zona eases aac NOTE Please make sure the device is connected before selecting the input source 11 OSD Menu Operation i 5 Q 5 Recording Operation Maintenance and Service Basic Operation Using the On Screen Display Menu The On Screen Display OSD menu acts as the Main Menu and aids the user in browsing through the different options properties available on the television unit Press the MENU button on the remote co
12. view a channel directly by keying in the specific channel number GO Return to the previous channel viewed CH FAV Displays Channel List and the Favourite Program List MENU Press to display the OSD menu EXIT Press to exit the OSD menu CURSOR KEYS A W lt gt OK Allows you to navigate through the on screen menus and adjust the system settings to your preference CH A Y Channel Program VOL lt gt Volume EPG To show the Electronic Program Guide DISPLAY Press to display the current mode s information Basic Operation D SETUP D MENU D TITLE SUBTITLE A B GOTO D SETUP D MENU D TITLE No function OSD Menu TV TXT CANCEL REVEAL REPEAT VOL Volume REPEAT Repeat playing the title or chapter DELETE Delete recorded programs from the Record List REC LIST Display Recorded List SCREEN 1 While playing music press this button to turn off the LCD TV screen i gt gt 2 While in HDMI input press this button to change between Video and PC mode 3 While in VGA PC input press to auto align screen HOLD SIZE SUBPAGE INDEX p 5 Q 5 Operation Recording Operation Maintenance and Service 10 Basic Operation The following section conveys the unit s general operation such as switching the unit on selecting the input source and using the automated channel search command Switching the unit on The following steps are a guide to switch the
13. LE23A84HD LE19A84HD LED IV USER MANUAL IMPORTANT WARRANTY INFORMATION INSIDE PLEASE READ Trademark of TEAC Corporation JAPAN www teac com au AC WARRANTY PROCEDURE v1 5 2 DEC 2011 Please read the owner s manual carefully and ensure that you have followed the correct installation and operating procedures 1 Please read this warranty card 2 Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service 3 If you require Warranty Service please contact the TEAC Customer Support Hotline at 1300 553 315 for assistance Please ensure that you have the model number serial number and purchase receipt ready when you call Please complete the section below and keep this information for your own records Owner s Name Owner s Address Postcode Model Name No Serial No Dealer s Name Dealer s Address Postcode Authorised Service Centres in Major Australian Cities NSW Queensland Western Australia 151 Arthur Street Unit 1 320 Curtin Ave West Unit 2 50 Pilbara Street Homebush West NSW 2140 Eagle Farm QLD 4009 Welshpool WA 6106 South Australia Victoria 11 Mcinnes Street 282 Normanby Road Ridleyton SA 5008 South Melbourne VIC 3205 Thank you for selecting a TEAC product If you should require assistance with your product regarding its setup or operation or if any difficulties arise please call us directly for advice between Monday to Friday at 8 30AM 6P
14. M AEST at the TEAC Customer Support Hotline 1300 553 315 teacservicesupport awa com au www teac com au T E AC WARRANTY INFORMATION v1 5 2 DEC 2011 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Warranty Terms amp Conditions 1 TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill Maintenance and cleaning i e laser head is not covered by this warranty The TEAC warranty only applies to TEAC products purchased used and serviced in Australia 2 The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates being the Australian Consumer Law Refund or replacement via your retailer is available for period of 14 days after purchase for goods that have been inspected and determined to have a major failure Refund and exchange is not applicable for change of mind 4 Subject to the terms herein this warranty effectively covers the equipment as specified in the Warranty Periods
15. OP button to exit Time shift and return to live TV broadcast 3 Scheduled Recordings Scheduled Recording is a function which allows the user to record future programs without physically being present to initiate the recording A schedule setup is made to mark recording dates and times of the broadcasted programs stated on the Electronic Program Guide EPG Recording would terminate at the end of the program When recording starts the control bar shown below will display Scheduled recording is explained in detail on the following page The name and number The current state of the program of the program The process of the program SHIFT TIME MAX SHIFT TIME 00 00 17 00 40 00 M l E Prev Next Pause Stop A B mark The current time 31 Recording Operation T F wh fs cc Recording Operation Electronic Program Guide EPG Press the EPG button to display the OSD menu as below Details information gt of selected program 07 Dec vera 1 YLE TV1 14 30 18 00 18 00 19 3 5 YLE FST ree Program list for the 8 YLE24 20 15 21 08 Tinkin otsikoissa s current channel S VAE Teeme sa Press direction 22 00 22 29 Rakkauksia 22 30 22 33 rets idrottare 2008 rdstas f buttons to navigate 22 35 23 54 Estradilia Aikamiehet 40 vuotta the lists ME cx Select 0 Prev Day Next Day uae Record Once the program of choice has been highlighted pr
16. PHOTO MUSIC MOVIE TEXT USB device list MAIN MENU ICON DISPLAY PHOTO MUSIC MOVIE TEXT Hints for operation Information and hints on USB device 3 Press lt gt buttons to select the type of media in the device you want to play from the following options PHOTO MUSIC MOVIE and TEXT Press V buttons to select the device and press OK button to enter Se D O 5 Return to Preview E PS device list p Up Folder DSCO02IS JPO 05 0020 0 5 A Nee E Pies 2 7 Ww Ae m em istee 2846 KBytes Up Folder 2008 04 01 Information 0 C00259 PG 0 C00277 PG 37907 DSC00397 PG 5 16 32 39 Lu WM preg Delete Current Fie AddiRemove af OK Add Remove to playlist 0SC00434 PG DSC00443 JPG DSCO0791 bg 08001242 T 6 3 of oa Z oO a Full screen gt Move Press lt gt A V buttons to browse through the files Press the OK button to select the file or access the folder then press button to play selected media in full screen To select or deselect all files in the folder press the green button on the remote In full screen mode you can access the option menu at the bottom of the screen by pressing the OK button and press W button to hide it Press 8 button to stop and exit the full screen program Maintenance and Service 22 Multimedia Operation To access photo audio video or text files from an external drive he right input has to be a
17. RE menu Picture display settings can be altered as desired The following options are adjustable Description Picture Mode There are four preset settings to choose from Standard Dynamic User and Mild Note Contrast Brightness Colour and Sharpness in the Picture Mode settings can only be adjusted and saved while in User Mode Contrast Adjust the difference between the brightest and darkest regions of the picture Brightness Adjust the overall brightness of the picture Colour Control the colour Sharpness Increase this setting to see Sharp edges in the picture decrease it for softer edges Tint Controls the tint NTSC mode only Colour Temperature Choose from Medium Cool User and Warm Red Controls the red colour of the picture Green Controls the green colour of the picture Blue Controls the blue colour of the picture Aspect Ratio Choose from 4 3 16 9 Zoom1 Zoom2 Panorama Note Different aspect ratios are available depending on the input source Noise Reduction Choose interference noise modes Off Low Middle High Screen PC mode only Press OK to enter the submenu to adjust the Horizontal Vertical position Size or Phase of the picture Over Scan HDMI mode only Choose from Video PC 16 OSD Menu 3 SOUND menu General sound settings can be adjusted according to personal preference with the following options Bass Balance Auto Volume Surround Sound Description
18. SED from the memory drive connected to the USB HDD port Follow the instructions below to enter the DVR menu and format the USB HDD Press the MENU button on the remote Under the CHANNEL tab select DVR File System and press OK Select disk drive to format Scroll down to Format and press OK Select FAT32 and press OK p The following sections explain each submenu that can be accessed through the DVR file system Select Disk If multiple USB flash drives are connected to the unit select a Select Disk drive location to record the files to USB 0 NOTE Disk 4 G Unit will always use the first partition C as a default record A ing partition If your hard disk drive contains more than one v Somer partition please make sure to use first partition for recording purposes Recording Operation T F wh fs cc 28 Recording Operation Check DVR File System Press OK button to check if your USB device is ready and compatible for DVR functions If the USB device is formatted and compatible with the unit it will display a SUCCESS message if the device is not compatible it will display FAIL NOTE Failure to identify the File System may be due to insufficient memory space in the flash drive or due to a faulty USB cable connecting the unit to the flash drive Try a USB device with a larger capacity or another USB cable Another possibility as stated before is that the USB device
19. T place the unit where _ itis exposed to rain excessive moisture or grease Doing so may result in fire electric shock malfunction or deformation Doing so may result in fire or explosion DO NOT use or store flammable or combustible materials near the unit DO NOT place the unit on an unstable _ surface such as a sloped table or any stand with a contact area smaller than the bottom surface of the unit stand Placing the unit on a flat stable surface can prevent accidents from happening Ignoring this precaution may result in the unit toppling over and causing injury DO NOT place the unit in a poorly Do not cover the unit with a tablecloth curtain or other material Insufficient ventilation may result in the unit overheating which may cause a possible fire outbreak The excessive heat can melt the insulation and expose live shock DO NOT run power cords near heat producing appliances such as radiators stoves or irons wires resulting in fire or electric A A Be sure to place the unit on a level surface The following precautions are divided into Warnings and Cautions Install the antenna away from high voltage power lines and communication cables Make sure itis installed securely _ If the antenn
20. Table below from the date of purchase TEAC PRODUCT WARRANTY PERIOD LED LCD TV 32 80 cm and above 1 Year In Home Service Pick up Available All other TEAC products 1 Year Carry in Service 5 In Home Service Pick up Service This service will only be provided as part of this warranty if all the following conditions are met a The product is indicated in the Warranty Period Table b The product is within the warranty period C The product is located within the normal service area of the local TEAC Authorised Service Centre If TEAC determines that the product is not repairable on site TEAC can complete the repair by taking the product to a TEAC Authorised Service Centre Carry in Service Where In Home service Pick up is not available the purchaser is required to send the product to the nearest TEAC Authorised Service Centre for repair In this event proof of purchase is required to support a warranty claim After the repair the product will be available for collection by or return to the purchaser at a fee upon request TEAC in home service can be made available at a fee upon request 6 A 12 month replacement warranty is applicable to all Accessories such as Remote Power Adaptors and Cables f TEAC will ensure to the best of its abilities that all required parts are made available for any required service repair 8 TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete prod
21. USIC Sample rate 8K 48K Bitrate 32K 320K Special note 1 The Media Unit can only support USB memory devices such as hard disk drives and flash drives and will not support multimedia devices such as mobile phones and cameras for recording purposes 2 Unit will only support hard disk drives with additional power supply maximum disk partition size of 400GB and a maximum capacity of 1 5TB For optimum performance it is highly recommended that a hard disk drive with an external power supply be used for larger capacities 3 The maximum number of files that each folder can contain is 5000 files 4 When using external USB it is suggested that high quality USB extension cables supported 480mHz be used to ensure smooth playing of video files 5 The television unit can only support audio formats of single and binary channels T F wh IE cc 36 TEAC TEAC CUSTOMER SUPPORT HOTLINE TCS 1300 553 315 Between Monday to Friday AEST 8 30AM to 6PM
22. a touches a power line contact with the antenna may result _in fire electric shock or serious injury gis Des Disconnect this device from power by turning the power off at the AC power outlet and unplugging the AC plug Warning Ignoring this precaution may result in death or serious injury Caution Ignoring this precaution may result in injury or property damage Use and Maintenance Although the LCD screen is made with high precision technology and 99 9996 or more of the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LCD screen This is a property of the LCD screen and is not a malfunction Wamings Disconnect the power cord from the power source during a thunderstorm Not doing so may result in fire or electric shock When not using the unit for long periods of time discon nect the power cord from the wall outlet If not cleaned clogged dust particles at ventilation holes could cause the unit to heat up and ignite when switched on which may result in a fire outbreak Always have two or more people dust on the power plug pins _ With a clean dry cloth at hand to lift or move the unit f the unit is dropped it could get damaged or otherwise cause injury DO NOT insert any metal objects such as a screwdriver paper clip or a bent wire into the v
23. anually on demand and also using Scheduled Recording NOTE e When DVR function is in progress DO NOT unplug the power or the external USB device at will e When DVR function is active the power indicator will blink with red and green colours consecutively Before the start of a program recording please make sure the external USB device is connected e Pre recording if the available storage space is low a warning message will appear before recording e While recording If available storage space becomes low the recording will be automati cally stopped MEE Ed SI DEBE Channel Edit Signal information Record Start Record List Recorded Mode Schedule List Feee Record Limit i 5 Q 5 Operation Recording Operation Maintenance and Service 2f Recording Operation Digital Video Recording DVR File System DVR File Syetem Attach a compatible USB device to the back panel of the unit Select Disk C From the CHANNEL menu enter the DVR File System to GES AALS SAL access recording options USB Disk Format NOTE Time Shift Size NOT all USB devices such as phones MP3 players cameras and the like are compatible with recording files Select The USB drive has to be formatted before any recording can be done WARNING Ensure that no valuable information is currently stored in the hard disk as the formatting process means that ALL DATA will be ERA
24. ccessed by pressing the INPUT button to select from a range of choices 1 Photo To display photos select files from the folder and press PLAY to view in full screen The image should appear on screen as illustrated below To play audio files while viewing photos select individual files to be added to the playlist before playing the picture files in full screen mode Once all music file selections have been made in music mode access the picture files again and press play to view pictures in full screen mode Select the music option in the menu bar below by using buttons to listen to the playlist while viewing the pictures Access the side bar playlist once in full screen mode by using the menu as illustrated below Individual picture files can be removed from the playlist one by one using the YELLOW button on the remote The playlist can be cleared using the GREEN button on the remote D ie J ZOOM IN ZOOM OUT lt ed Repeat 1 Music Playlist Info Rotate Rotate ZoomOut Zoom In Press lt gt button to select the option on the table and press OK button to change Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Music Play pause selected music you can only play or pause the music you have selected Playlist Display the playlist on the screen and you can select the photo by A V button and press OK button to select Press lt gt button to return to the options table Info Display the infor
25. e Shift recording but Scheduled amp Manual Recording will still take priority on space Speed Displays the speed of the attached USB device 29 Recording Operation T F wh fs cc Recording Operation ES schedule List DVR File System 1 Free Record Limit Select recording time from 1 hour to 6 hours Note 1 This applies only to manual instant recording 2 Recording will stop once it reaches the maximum set time 2 Manual Recording After the settings are completed on the DVR File System menu you can start recording by selecting Record Start in the menu and press OK button in DTV mode You can also start recording by press ing the REC button on the remote control Record buttons Record Press to start the recording mode PLAY PAUSE Press to start the time shift mode while watching DTV Record list Press to display the recording list B Stop Press to stop recording Recording When the REC button is pressed the screen will display the recording menu as below RECORDING TIME 00 00 09 MAX RECORDING TIME 0000 51 07 3k be e i i F Play FB Prev Next Pause Stop 1 YLE TV1 Sydamen asialla NOTE e Display the Recording infobar by pressing the EXIT button on the remote control press again to close e Press STOP button to stop recording e Press PLAY button to play the program you are recording from the beginning while the unit continues recording i
26. e max PHOTO resolution is 3000x3000 pixels min resolution is 100x100 pixels MUSIC Sample rate 8K 48K Bitrate 32K 320K Special note 1 the Media Unit can only support USB memory devices such as hard disk drives and flash drives and will not support multimedia devices such as mobile phones and cameras for recording purposes 2 Unit will only support hard disk drives with additional power supply maximum disk partition size of 400GB and a maximum capacity of 1 5TB For optimum performance it is highly recommended that a hard disk drive with an external power supply be used for larger capacities 3 The maximum number of files that each folder can contain is 5000 files 4 When using external USB it is suggested that high quality USB extension cables supported 480mHz be used to ensure smooth playing of video files 5 The television unit can only support audio formats of single and binary channels p 5 Q 5 Operation Recording Operation Maintenance and Service 26 Recording Operation Digital Video Recording DVR settings In DTV Mode only The DVR function allows this unit to record live digital TV DTV programs allowing for viewing on demand at any time This function supports DTV program recording Time shift and playback as described below DVR will only record when there is an external USB drive connected to the unit with sufficient memory space available Recording can be done both m
27. e system settings to your preference CH A Y Channel Program VOL lt gt Volume EPG To show the Electronic Program Guide DISPLAY Press to display the current mode s information D SETUP D MENU D TITLE SUBTITLE A B GOTO D SETUP D MENU D TITLE No function TV TXT CANCEL REVEAL REPEAT VOL Volume REPEAT Repeat playing the title or chapter DELETE Delete recorded programs from the Record List REC LIST Display Recorded List SCREEN 1 While playing music press this button to turn off the LCD TV screen eee eee 2 While in HDMI input press this button to change between Video and PC mode 3 While in VGA PC input press to auto align screen HOLD SIZE SUBPAGE INDEX Basic Operation OSD Menu i 5 Q 5 Operation Recording Operation Maintenance and Service Remote Control 5 POWER Turn the TV on back to Standby mode DIV USB INPUT AUDIO MUTE DTV USB Switch to DTV USB INPUT Display the input source menu AUDIO Select different audio languages subject to availability from broadcaster MUTE Press to mute the sound press again or press VOL to unmute PICTURE Press repeatedly to cycle through the available video picture modes SOUND Press to cycle through the different sound settings SLEEP Repeatedly press to scroll to preferred off time ASPECT Adjust picture size PICTURE SOUND SLEEP ASPECT NUMBER BUTTONS Choose and
28. entilation openings A V terminals Doing so poses a serious risk _ Of fire or electric shock When moving the unit be sure to turn off the unit and unplug the power cord from the wall outlet Moving the unit with the power cord connected to the outlet may cause damage to the cord resulting in fire or electric shock Wipe off any moisture dirt or Failure to do so may result in _ fire or electric shock DO NOT allow children to climb onto the unit The unit could topple over onto a child and result serious injury If you notice any unusual odors or smoke around the unit immediately disconnect the unit from the outlet and contact the Service center Failure to do so may result in fire or electric shock _ Always turn off the unit and unplug the power cord when _ cleaning the unit Use a soft dry _ cloth to clean the unit _ Never clean with irdustrial _ strength polish wax benzene paint thinner air freshener _ lubricant detergent or other such chemicals Also do not clean with a damp cloth DO NOT dismantle or modify the unit in any way Do not attempt to service the unit yourself Doing so may result in fire or electric shock If the unit requires repair contact the Service center Ka ca A Warnings
29. ess the REC button on the remote control This will bring you to Record Mode where you can set the start and end time of the recording Record Mode Recorded Mode El 655335 Setting the Record Mode Mode once The TV will record the program automatically according to the Start Time set time Minute 00 Hour 00 TITLE Display the name of the recording program A m MODE Select the record mode End Time Start Time Set the start recording time Minute 00 End Time Set the end recording time dps gi Date 2005 07 20 Month Jan Press OK button to save the setting and exit the menu ue rey Sana bad NOTE If channel locks or parental control locks are enabled the locked programmes and channels can be recorded viewed and played back on this TV using password access Key in your current password when the password prompt pops up While recording is in progress for a locked channel you will still need to key in the password to watch that channel This does not interrupt the recording process Recording Operation To view the Schedule List press MENU under the CHANNEL tab scroll down to Schedule List and press OK to view the schedule of recording T F wh fs cc 32 Recording Operation Schedule List e t ee t t wA Gg The Schedule List can be viewed by accessing it through the OSD menu by pressing the MENU button on the remote control NOTE e Unit will only record one program at a ti
30. ftware is available for download Alternatively software can also be downloaded from TEAC s website at http www teac com au and installed via the USB input on the LCD TV Restore Factory Default Press OK button to restore factory default settings Note Restore Factory Default will erase all channels and user settings OSD Menu i 5 Q 5 Operation Modet OAD Version Software Version Used Time Customer Support Hotline 1300 553 315 Recording Operation Emait teacser vicesupport awa com au i rum ED sie d Homepage http www teac com au HDMI CEC Turn on off HDMI CEC function This option is only available in HDMI Input Mode AutoTurn off Enable both the TV and a compatible HDMI device to turn off together Backlight Adjust the backlight System Info Display the TV system information and customer support information Maintenance and Service 19 OSD Menu 6 LOCK menu This option allows parents to block channels and programs using a password NOTE The default password is 0000 If you have forgotten your current password the master password is 8899 Please take note of this Enable Locks Set Password Block Channel Parental Guidance Description Enable Locks Turn on off the Lock Channel function Note You are required to enter a password to access this menu Default password is 0000 Set Password You can set your desired password If the password was changed prev
31. he LCD TV NOTE For more detailed instructions please refer to your after market wall mounting instruction book 100 100 Thread hole size M4 x 10 depth TV mounting screw size on the TV 6 Names of each part Front View N j EI v J S 55 E i o E E 1 J E d S O Q e 9 7 t A Led Indicator gt E INPUT Display the input source menu keep clear MENU Display exit the OSD menu Aliv CH Scan through channels al VOL Adjust the volume POWER Turn on standby the TV set OSD Menu Se are 3 Es 5 so Recording Operation Maintenance and Service Names of each part Back View R in VIDEO L in Coax Basic Operation p e Uo O0 0090 Power USB HDMI1 VGA PC IN H igne POWER Connect to the AC power adaptor USB Connect USB storage devices hard disk drives HDMI1 2 Connect to the HDMI output of external devices like DVD players with a HDMI cable VGA For PC video input Connect to the VGA RGB plug on the PC PC IN Connect to the audio output terminal on the PC YPbPr Connect to the YPbPr video output sockets of external devices RF Connect an antenna or a 75 Ohm coaxial cable to receive a TV signal H phone out Connect to your headphones or othe
32. ic A Ua Pra EE ECC I E add UC REIS 18 SORTON MENU coi iino ode letta aaa davon mucus PUR IM scene 19 SM EOS GTI 20 Multimedia Operation Mu timedit ONETAN od it itae deut Met ic MM Gate sun CMM 21 26 Recording Operation HMM 27 33 Maintenance and Service NE NER cee en arate OC MPO NM e NE 34 SDS CIN CANONS de reu 35 36 Power Supply ME DO NOT touch the power plug with wet hands Doing so may result in electric shock DO NOT bend the power cord excessively or place heavy objects on it Doing so may result in fire or electric shock When disconnecting the power cord from an AC outlet always grasp it by the plug Pulling on the cord can damage the internal wire and may result in a fire DO NOT use a damaged power cord or plug or a loose outlet Doing so may result in fire or electric shock Always unplug the unit before cleaning Not doing so may result in fire or electric shock DO NOT plug several devices Insert the power plug fully into into the same outlet the outlet congested outlet may cause A loose or improperly the outlet to overheat and start inserted power plug afire _ result in fire User Guidance Information Basic Operation
33. ing steps first f you still have the problem turn the power off and contact your dealer an authorized service center Problem The picture does not appear The picture appears too slowly after the power is turned on Screen is too bright or too dark Screen is too large or too small Stripes appear on the screen and it shakes The screen does not move Screen appears but there is no sound Remote control does not work Picture is distorted USB not playing Action Is the power plugged in Insert the power plug Press the power button on the remote control Like your computer the TV has to run a number of diagnostic and software checks before it can display any broadcast channels The picture should appear in approximately 15 seconds Perform brightness adjustment or contrast adjustment Adjust the aspect settings Keep any appliances that emit magnetic radiation away from the TV Press the PAUSE button Check if the Pause button is pressed on external equipment 1 Check if the MUTE function has been activated 2 Increase the sound level by pressing volume adjustment button 3 Check if sound terminal of external input is connected properly 4 Check if audio cables are connected properly 5 Select and check the other input If the sound still does not work and the other channels are the same after you have done as the above contact your dealer or an autorized service center 1 Check if main
34. iously you must enter the present password OSD Menu New Enter the new password Confirm Enter the new password Block Channle When a channel is locked you must enter your password to view the channel Use and V buttons to select the channel and press the GREEN button on the remote control to lock the channel Press the GREEN button a second time to unlock the channel p E 5 Operation i CH Name 2 YLE TV2 5 YLE FST 8 YLE24 9 YLE Teema 1 YLE PELI 2 YLEQ 5 YLEMONDO 8 YLE X3M 1 04 Recording Operation 0000000608 D i Snore S Smet Back and Service Parental Guidance Allows you to select the Parental Guidance mode Maintenance 20 Multimedia Operation USB Usage Precautions Never turn the unit off or disconnect a USB Storage Device Flash Drive when it is being accessed Doing so could damage the TV and the connected USB storage device e Do not use a device that has a maximum current consumption of 100 mA or more e Do not use a device that has security functions or other special functions e Do not use a device that is divided into two or more partitions e A USB hub cannot be used to connect USB devices to this unit USB storage devices that can be played on this unit e Only USB Storage Device Flash Memory maximum 16GB can be used Do NOT use a high capacity USB hard disk with this unit Some flash memory players that charge from USB terminals
35. ls Select a program press FAV button to mark or unmark the program as a favourite channel Signal Information Displays the signal information in DTV mode Record Start This option allows the user to record programs from the menu list Please refer to RECORDING OPERATIONS on Page 26 onwards to view detailed instructions Recorded List This option allows the user to view a list of recorded programs ready for viewing on the external memory Hard Disk Drive Record Mode This selection allows the user to view the details of scheduled programs and to opt for weekly or daily times of recording Schedule list The Schedule List displays a list of scheduled recordings for the future with time and date listings Free Record Limit Select recording time from 1 hour to 6 hours DVR file system The DVR function is only available for DTV If multiple external USB storage devices are connected to the unit there is an option to select the desired drive to record the desired programs Your device will need to be formatted before any recording is done NOTE Formatting will erase any existing data on the device Back up all existing data before formatting TEAC accepts no responsibility for any loss of data 15 OSD Menu i 5 Q 5 Operation Recording Operation Maintenance and Service OSD Menu p E 5 Operation Recording Operation Maintenance and Service OSD Menu 2 PICTU
36. mation of the photo Rotate Rotate the photo clockwise counter clockwise Zoom Out In Zoom out in the photo Move View Move the photo in Zoom in mode i 5 Q 5 Operation 2 Music To play audio files select individual files to be added to the playlist alternatively press the GREEN button to select all files in the folder Once all desired files are selected press PLAY Recording Operation Access the side bar playlist once in full screen mode as illustrated below by using the V buttons Individual files can be removed from the playlist one by one using the YELLOW button on the remote The playlist can be cleared using the GREEN button on the remote Maintenance and Service 23 Multimedia Operation C i aci MP3 Screen Mute Super Star ES ABCDEF mp3 ABCDEFGHIJK mp3 SHE gt 160K Sampling 44K 2003 Size 4257 KBytes Remove Remove all from playlist 00 00 10 00 03 37 4 2 gt RepeatNon Goto Time Press lt gt button to select the option on the table and press OK button to change Press button to search for music and press OK button to select Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Goto Time Start playing music from your desired time Press OK button to select Then input the exact time which you wish to play from Press OK to start playback Screen Mute Press the BLUE button to enter the Screen Mu
37. me If a recording is done with conflicting start and end times it will not register onto the schedule list Unit hold a maximum of 8 scheduled recordings D elete existing schedules to set up more schedule recordings Delete a scheduled recording by pressing the RED button on the remote control To view the Schedule List press MENU under the Channel tab scroll down to Schedule List and press OK to view the schedule of recording Recorded List After the recording has been done the stored programs can be viewed through a Recorded List by pressing the LIST button on the remote control To play the items press OK on the remote to select the recorded program To delete the program from the list press the RED button If Parental Control locks have been enabled some recorded programs Passe may be locked because of their rating according to the EPG You will be prompted to key in your current password before playback can BBC News start for these recordings JBC Programme Recorded list Display the Recorded List menu INFO Displays the information of the program you recorded RED button Delete the program you select Deale a INFO Select Record List 33 Recording Operation T F O wh fs cc T F O wh IE cc Troubleshooting Do not use other functions that are not mentioned in this user manual f a problem occurs with your LCD TV please take the follow
38. n the background Press Record List button to display the Recorded list you can play the program you selected You can record a program and view a recording simultaneously Recording Operation T F wh fs cc 30 Recording Operation Record in Progress d E Turn off the screen and continue recording Stop recording and power off Cancel Move Back RECORDING IN STANDBY MODE This unit is able to record while in Standby mode Start a recording then press the power button A pop up message as shown above will be displayed Select Turn off the screen and continue recording Or select Stop recording and power off While recording in standby mode unit will not output any picture or sound The power indicator will flash in green and red consecutively while recording is in progress during Standby mode Time Shift Time shift is an ideal way to temporarily pause live TV in case of a distraction such as a doorbell or a ringing telephone Once the distraction has passed playback can be resumed from the point where the TV program was paused Press the PLAY PAUSE button on the remote control to start the Time shift mode Press the PAUSE button again to resume playback NOTE Display the Time shift infobar by pressing EXIT button on the remote control press again to close Press the PLAY button to play the Time shifted program Press the ST
39. ntrol to access the OSD menu as shown below Main menu CHANNEL PICTURE SOUND TIME OPTION LOCK Submenu Channel menu for example Hint you should operate the OSD menu according to the hint OSD Menu Use the direction buttons to make a selection from the main menu CHANNEL PICTURE SOUND TIME OPTION or LOCK Press V button to enter the submenu system p E 5 Operation Once in the submenu use V buttons to select an item Press the OK button to access the selected item to make changes to the settings To return to the main menu press the MENU button To exit the menu display press the EXIT button Recording Operation NOTE e Some menu items can only be activated when the right INPUT selection has been made ie the CHANNEL selection can only be accessed under DTV and ATV input selections Operate the OSD menu according to the hints provided at the bottom of the screen Maintenance and Service 12 OSD Menu 1 CHANNEL Menu Available in ATV DTV Mode This menu selection contains scanning preferences either automatic or manual tuning Channel Signal Information Recording Start Recorded List Recorded Mode Schedule List Free Record Limit DVR File System Settings can be altered for individual channels Auto Scan DTV Manual Tuning ATV Manual Tuning Channel Edit Signal Information CHANNEL Record Start A E Midi Back Select Quit Yv
40. or Sound System searching Fine Tune Press lt gt button to fine tune a channel AFC Turn on off the auto frequency control function Search Press button to manual search NOTE Press the RED button to save any changes to the settings Channel Edit The Channel Edit menu offers the user to make personal changes to the program listings Various options are subjective to Analog TV and Digital TV programs Press the OK button to enter the Channel Edit menu from the CHANNEL menu as shown below 14 OSD Menu Delete Move Skip Rename FAV Select the channel to delete and press the RED button Delete will appear on the right of the program edit menu next to the channel Press the RED button again to confirm delete If you decide not to continue with the deletion press the menu button to quit Select the channel to be moved and press the YELLOW button Use the CH buttons to change the channel position Press the YELLOW button again to confirm the change Press the MENU button to save and exit Select a channel and press the BLUE button to mark the channel As long as the channel has a skip label it will be skipped when you search through the channels with the CH buttons Select an ATV channel and press the GREEN button to change the name of the channel with the lt gt direction buttons Press the GREEN button again to confirm the name NOTE You can only rename analogue channe
41. r Remote Control 2 x AAA Battery Quick Start Guide Contact Card Wall Mounting Information Stand and wall mounted optional Your LCD TV is able to accommodate wall mounting with the use of a wall mount bracket not supplied with LCD TV please contact your local hardware store and the mounting hole screw size M4X10 on the back of the unit We recommend removing the TV stand prior to mounting the TV on the wall Please refer to the figures and procedure below How to remove re install the stand Follow instructions below to remove the base of the TV c LAA lt i AA ae 1 Place the unit face down on a soft surface 2 Loosen and remove the 4 screws securing the stand to the TV per the diagram on right 3 Gently remove the stand 4 To reinstall the stand place the unit face down on a soft surface and reverse the above instructions NOTE Make sure the power is completely disconnected and unplugged before starting ey h 5 ee eA AHBRBBHHRHHRHRRHRRI RE LIS How to mount the LCD TV on the wall 1 After detaching the stand fasten 4 mounting screws thread size M5X10 NOT SUPPLIED Please contact your local hardware store into the 4 screw holes on the rear cover see the figure below 2 Fasten wall mounting bracket NOT SUPPLIED with LCD TV please contact your local hardware store with screws on the wall 3 Carefully check for the strength of the connection before releasing t
42. r audio equipment Coax Digital output to AV receiver VIDEO Connect to video output terminal of external devices R L in Connect to the audio output terminal of external devices shared with YPbPr OSD Menu Operation p E 5 Recording Operation Maintenance and Service Remote Control eFunctions of remote control buttons The remote control is using Infra Red IR Point it towards the front of the TV The remote control may not work correctly if it is operated out of range or out of angle POWER Turn the TV on back to Standby mode DTV USB INPUT X AUDIO MUTE DTV USB Switch to DTV USB INPUT Display the input source menu AUDIO Select different audio languages subject to availability from broadcaster MUTE Press to mute the sound press again or press VOL to unmute PICTURE Press repeatedly to cycle through the available video picture modes SOUND Press to cycle through the different sound settings SLEEP Repeatedly press to scroll to preferred off time ASPECT Adjust picture size PICTURE SOUND SLEEP ASPECT NUMBER BUTTONS Choose and view a channel directly by keying in the specific channel number GO Return to the previous channel viewed CH FAV Displays Channel List and the Favourite Program List MENU Press to display the OSD menu EXIT Press to exit the OSD menu CURSOR KEYS A W lt gt OK Allows you to navigate through the on screen menus and adjust th
43. ss Pll button to cancel Goto Time Playback a video from input time Zoom out in Zoom out in the movie screen Aspect Ratio Select the aspect ratio of the screen display Move View Move the photo in Zoom in mode 4 Display Text To play text files most files with the extension txt select individual files to be added to the playlist alternatively press the GREEN button to select all files in the folder Once all files are selected press play to view the text file in full screen mode see an example screen shot of text file view below Individual files can be removed from the playlist one by one using the YELLOW button on the remote The playlist can be cleared using the GREEN button on the remote Where In Home service Pick up is not available the purchaser is required to send the product to the nearest TEAC Authorised Service Centre for repair In this event a copy of this warranty card and a copy of your receipt of purchase must be enclosed to be a valid warranty Such equipment or part must be sent freight prepaid to your nearest TEAC Authorised Service Centre After the repair the product will be available for collection by or return to the purchaser at purchaser s cost The warranty does not cover freight or insurance In all cases of transit damage or lost a Claim must be filed against the carrier by the purchaser even if shipment is arranged by TEAC TEAC inhome service may also be available at a fee upon request
44. te mode press again to exit 3 Movie To play video files select individual files to be added to the playlist alternatively press the green button to select all files in the folder Once all files are selected press PLAY to view in full screen mode To access the side bar for the movie playlist once the movie is in play press OK to access the menu bar below as illustrated below and select playlist to select a different chapter or file by using the lt gt buttons Individual files can be removed from the playlist one by one using the YELLOW button on the remote The playlist can be cleared using the GREEN button on the remote p 5 Operation 00 00 00 90 50 00 Pl 7 p S Repeat 1 Set A E WALES nfo Slow Step GOTO Time Zoom In Recording Operation m Press lt gt button to select the option on the table and press OK button to change Maintenance and Service 24 Multimedia Operation Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Set A B Select and play the preferable frame of the program in a loop by setting A and B at the beginning and end and there will be a sign on the left of the screen press OK button again to cancel Playlist Display the playlist on the screen Info Display the information of the movie Slow Play the programs at slow speed press P button to cancel Step Step one frame at a time each time you press OK button pre
45. uct repairs within a reasonable period based on available resources and workload during the time when service is requested and performed 9 Refurbished parts may be used to repair the product In the case of a replacement the product may be replaced with a refurbished unit of the same type or if one is unavailable a similar refurbished model with equal or better features amp specifications 10 Please be advised that if the product presented for repair is capable of retaining user generated data the data may be lost during servicing Customers are strongly encouraged to back up all important information data before sending the product in for service repair 11 Service will be provided only during normal business hours and under safety conditions and circumstances TEAC and its authorised service agents can refuse any repair if safety in relation to OH amp S becomes a concern to its staff or authorised service agents personnel 12 The warranty is void and warranty claims may be refused subject to the Australian Consumer Law if a The product was not transported installed operated or maintained according to manufacturer instruction or b The product was abused damaged tampered altered or repaired by any unauthorised persons or c Product failure is due to accidents during use installation or transit power surges use of defective or incompatible external devices exposure to abnormal conditions such as excessive temperatures or h
46. umidity or entry of liquids objects or creatures into the product 13 Noone is authorised to assume any liability on behalf of TEAC or impose any obligation on it in connection with the sale of any equipment other than as stated in this warranty and outlined above 14 TEAC reserves the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers retailers 15 LCD dead pixel policy please contact TEAC Customer Support Hotline on 1300 553 315 for assistance Contents oafety Precautions POWERS U0 DIY pec E 1 FNS CAN ATOM esis sie sei rm 2 Doe Ch ANC um 3 Important on a exeunt it eu uu So ri 4 5 User Guidance Information Accessories Wall Mounting Information 6 Names of each part Front View MERE E I m UR 7 Names of each part Back VIEW Y a aTe a 8 Remote COMMU OM selena Er 9 10 Basic Operation PAS IS OD SPAIN EE T A T 11 12 OSD Menu To CGAININEL odessa tae eie ecu niue T La A LEN Aid ed 13 15 2 PICTUBEMOGfPU niet ats des acu in etapa ian ox oats aeu ebur te Sm IR 16 Bix SOUND 17 ds UMER tbc etu bsc l
47. us during lightning storms or when unused for long periods of time 13 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this unit This symbol indicates that there are important operation and maintenance instructions in the literature accompanying the appliance NOTE a To prevent damage which may result in fire or hazards the unit should not be exposed to rain or liquids b Do not place objects containing liquids such as vases on the unit If drinks or liquids have been spilled on the unit unplug the unit from the power source and refer to TEAC service personnel for assistance C Servicing of this unit should be conducted by qualified and certified TEAC service personnel d The manufacturer will not be held responsible for any damage caused by any modifications done on the product without authorisation from the manufacturer s authorised service agent Basic Operation OSD Menu Operation m Recording Operation Maintenance and Service User Guidance Information Basic Operation OSD Menu S 9 ww ES g 5 so Recording Operation Maintenance and Service Accessories e The configuration of the components may look different from the following illustration NK User s Guide AC power adapto
Download Pdf Manuals
Related Search