INSTALLATION MANUAL
Contents
1. V iItimate Solar INSTALLATION MANUAL SG 60 WATER HEATER 3 3 Techno Park Drive Williamstown North VIC Australia 3016 Phone 03 9397 3993 Fax 03 9397 3994 Email ultimate virginbroadband com au Web www ultimatesolar com au 1 NOTICE The same series number can be found on package user manual and the storage tank If there is no series number or the series number is damaged this product is probably Fraud Supply water in the evening or in the next morning when the solar water heater is Being used at the first time or has shined for a long time without water in the collector Doing so will avoid breakage of tubes by thermal shock During continuous snow in Winter please fill the water tank completely and empty the Tank once very two days without sunshine Consult or hire professionals in your area before and for installation The lightening Arrester should be considered in installation The system MUST BE MOUNTED FACING NORTH All exposed pipeline should be insulted properly to prevent heat loss and provide Freezing protection In the areas with ambient temperature under 5C electric Heating wire can be served as the solution of pipeline freezing Switch off power before operation Any modifications on the structures of water heater might lead to problems during service System controller combines auxiliary electric heater can be installed together wth the solar water heater 2 INSTALLATION 1 Connect re2. operation efficiency Generally parallel connection and in series Connection is suitable for the collectors MAKE SURE that the length of the inlet Pipeline is the same and should set check valve in the inlet pipeline You should Also set u pipe and air vent in the outlet pipeline the height is 100mm than collector To prevent tube breakage Pr ae SSeS Se bedea SS SSeS See eee ee Ve SRR Bes eRe Rese eo ag POSS SS SS SS2 5555555625 T2SENSOR aL ae ae TISENSOR Makeup Water Supply Choose suitable controller Choose suitable circular pump and accessories according to the circulation flow rate and Pump lift Connect the pipeline and check it The pipeline should be closed and not leaking The pipe outside should be insulation
3. flector and top reflector bar with screws M6x25 Top reflector bar 2 Connect front leg and back leg with screws M6x45 then connect diagonal bar 1 Diagonal bar 2 on front leg and back leg with screws M8x16 at last connect baseboard To front leg and back leg with screws M6x45 Back leg Diagonal bar j Diagonal bar 1 Front leg Baseboard 3 Connect diagonal bar of upright support with screws M6x25 and then connect The diagonal bar of upright support to back leg Diagonal bar of upright supporty N DP Diagonal bar of upright support 4 Connect reflector and top reflector bar to front leg with screws Mx16 lt Front leg Top reflector bar 5 Connect the bottom support to top reflector bar with screws M8x16 The bottom Support pu i The bottom N support 6 Connect tank bracket to top reflector with screws M8x16 Tank bracket 7 Loosen the screw cap of the 190mm water tank then put the water tank on the tank bracket And fasten the screw cap 8 Put some lubricant detergent on glass tubes then insert the glass tubes The bottom Support The 190mm water tank Glass tubes The bottom holder of the glass tubes 3 PLUMBING INSTRUCTION SOLAR COLLECTOR CONNECTION The connecting of the collectors to a collector array can be designed according to The location and position of the system Different ways of the connecting reflects The different
Download Pdf Manuals
Related Search