Home

USER MANUAL

1. How to mount the LED TV on the wall 1 After detaching the stand fasten 4 mounting screws thread size M6X8mm NOT SUPPLIED Please contact your local hardware store into the 4 screw holes on the rear cover see the figure below 2 Fasten wall mounting bracket NOT SUPPLIED with LED TV please contact your local hardware store with screws on the wall 3 Carefully check for the strength of the connection before releasing the LED TV NOTE For more detailed instructions please refer to your after market wall mounting instruction book 200mm F w fs T E 200mm Doll a P S i b il ls B I J AL i E poa i CA 2 o lt gt Thread hole size M6 x 8mm depth TV mounting screw size on the TV Fixing the stand 1 TV and stand parts First of all please check that you have all of the parts and that there is no visible damage If a part is missing or appears damaged please contact the TEAC Warranty Service Hotline at 1300 553 31 5 Before installing the stand please check that you have all of the parts and that there is no visible damage If a part is missing or appears d
2. 11 14 15 16 TEAC terms AND CONDITIONS dos Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill Maintenance and cleaning i e laser head is not covered by this warranty The TEAC warranty only applies to TEAC products purchased NEW from a TEAC Authorised Retailer in Australia This warranty only applies to the original purchaser and cannot be transferred The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates being the Australian Consumer Law Refund or replacement via your TEAC Authorised Retailer is available for a period of 14 days after purchase for goods that have been inspected and determined to have a major failure Refund and exchange is not applicable for change of mind Subject to the terms herein this warranty effectively covers TEAC products excluding products purchased for commercial purposes as specified in the Warranty Pe
3. DVD Operation CC TAE TI Dynamic This option is used to set the compression ratio in order to control the sound Volume contrast C Sm S Dolby Digital Setup Dynamic Set DRC To Full Preference Page AT G Subtitle la MENS offrench Way 7 Disc Menu ENG German Parental Spanish Password Default ese Preferred Audio Language Select to downmix multichannel audio soundtracks to stereo output Audio Choose a preferred language track to be played if it is available on the disc If it is not available the default language will be played 41 S e pra G be Q 2 le a gt A Maintenance and Service DVD Operation Subtitle Choose a preferred subtitle language to be used if it is available on the disc If it is not available the default E o Preference Page audio i Y AN language will be used Subtitle gt ENG English gt Disc Menu ENG French Parental German Password Default ortuguese Preferred Subtitle Language Disc Menu Choose a preferred menu language to be used if it is available on the disc If it is not available the default language will be used e 0 Preference Page sd Audio sue ai l AO English Parental French Password Default _ Preferred Menu Language S e h Q oa le A gt a Maintenance and Service 42 DVD Operation Parental When playing di
4. Green Controls the green colour of the picture Blue Controls the blue colour of the picture Aspect Ratio Choose from Full 4 3 Zoom1 Zoom2 Screen Mode 1 While playing music press this button to turn off the LED TV screen 2 While in HDMI input press this button to change between Video and PC mode 3 While in VGA PC intput press to auto align scree Advanced Settings Adjust advanced video features to fine tune the picture a AN 4 mo ZA fi o p E NR gt Advanced Settings Medium NR Set options to reduce video noise from Off Weak Medium Strong MPEG NR Set options to reduce MPEG noise from Off Weak Medium Strong Dynamic Contrast Medium Dynamic Contrast Available Dynamic Contrast from Off a s 10 Weak Medium Strong Backlight Adjust the backlight Move OK Select MENU Return EXIT Exit MPEG NR Medium Note Different aspect ratios are available depending on the input source 14 OSD Menu 2 SOUND menu General sound settings can be adjusted according to personal preference with the following options mad Os gt Le gr i Sound Mode Standard Treble A Bass ia Balance comerciar MU Surround Sound Off EQ Setting AVL Off SPDIF PCM 2 Move MENU Return EXIT Exit v Description Sound Mode There are five preset settings to choose from Standard Music Movie Sports and User Note Treble and Bass can only be adjusted in User mode Trebl
5. Scheduled Recording is a function which allows the user to record future programs without physically being present to initiate the recording A schedule setup is made to mark recording dates and times of the broadcasted programs stated on the Electronic Program Guide EPG Recording would terminate at the end of the program Scheduled recording can start while the TV is on the channel will switch automatically or on Standby Mode Please make sure that the connected USB device has enough data storage for recording If data space runs out the recording will stop automatically CAUTION DO NOT remove the USB drive while recording is in progress This may damage the drive Time Shift Time shift is an ideal way to temporarily pause live TV in case of a distraction such as a doorbell or a ringing telephone Once the distraction has passed playback can be resumed from the point where the TV program was paused Press the PLAY PAUSE button on the remote control to start the Time shift mode Press the PAUSE button again to resume playback NOTE e Display the Time shift infobar by pressing EXIT button on the remote control press again to close e Press the PLAY button to play the Time shifted program e Press the STOP button to exit Time shift and return to live TV broadcast Recording Operation c E ww y da O 3 le A gt a Available Time 07 18 57 07 19 28 Maintenance and Service 31 Recording Operation Ele
6. MEDIA Enter into media mode YyYanql OSD Menu D O 5 Operation ASPECT Adjust picture size SUBTITLE Select available subtitles in DTV and DVD mode ke MEDIA MON Audio Select different audio languages subject to availability from broadcaster DE SS D SETUP DVD system setup 5 Aspect Subtitle Audio D Setup A B During playback trigger A B looping playback by pressing once to park point A 9 g SS and again to mark point B Stop looping playback by pressing PLAY PAUSE or STOP O AB Golo D Menu Diitle eerie ex bates title chapter track ne eee ee play list Disc menu TEAC D TITLE DVD title 240602000542 DVD Operation Maintenance and Service 11 Basic Operation The following section conveys the unit s general operation such as switching the unit on selecting the input source and using the automated channel search command Switching the unit on The following steps are a guide to switch the unit on 1 Connect the television unit to the antenna wall socket using a coax television cable Connect any other external devices that will provide video input to the television 2 Connect the power cord to the power supply and flip the POWER Switch at the back of the TV to the ON position WARNING Make sure the power output from your power source matches the power input labelled on the television adapter 3 Press the button on the remote control or on the television panel 4 The o
7. PBC on when Fast Forward reaches the beginning of the next track it resumes normal play Freeze Frame Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs During CD HD CD WMA or Digital Audio disc JPEG playback press Pause 1 once to freeze playback Press Play button to resume normal playback c E ww y da O 2 le a gt a Maintenance and Service 35 DVD Operation Display Features This feature aids the user in viewing options readily available and is compatible with the following disc types DVD SVCD VCD CD HD CD WMA Digital Audio discs This display is available while the files on the disc are being played DVD Display feature When the DISPLAY button is pressed repeatedly while a DVD is being played the response will show as follows Disc Type Title Title being played Total number of titles Chapter Chapter being played Total number of chapter Time Elapsed time of disc playtime Language Language selection Number of optional languages Language Type Audio Type Subtitle Subtitle selection Number of optional languages Angle Angle being played Number of playing angles Disc Type Title Title being played T otal number of titles Chapter Chapter being played Total number of chapter Time Countdown of chapter time Disc Type Title Title being played T otal number of titles Chapter Chapter being played Total number of chapter Time Title e
8. agent OSD Menu Basic Operation Operation y O 5 DVD Operation Recording Operation Maintenance and Service Basic Operation OSD Menu D O 5 Operation DVD Operation Recording Operation Maintenance and Service Wall Mounting Information Stand and wall mounted optional Your LED TV is able to accommodate wall mounting with the use of a wall mount bracket not supplied with LED TV please contact your local hardware store and the mounting hole screw size M6X8mm on the back of the unit We recommend removing the TV stand prior to mounting the TV on the wall Please refer to the figures and procedure below How to remove re install the stand Follow the instructions below to remove the base of the TV 1 Place the unit face down on a soft surface 2 Loosen and remove the 4 screws securing the stand to the TV 3 Gently remove the stand 4 To reinstall the stand place the unit face down on a soft surface and reverse the above instructions NOTE Make sure the power is completely disconnected and unplugged before starting
9. cause a possible fire outbreak DO NOT place the unit in a poorly ventilated enclosure such as a cabinet e Doing so poses a serious risk _of overheating and a possible fire DO NOT place the unit where _ it is exposed to rain excessive _ moisture or grease e Doing so may result in fire electric shock malfunction _ or deformation Do not cover the unit with a tablecloth curtain or other material e Insufficient ventilation may result in the unit overheating which may cause a possible fire outbreak _ Doing so may result in fire or explosion e The excessive heat can melt the insulation and expose live _DO NOT use or store flammable or combustible materials near the unit DO NOT place the unit on an unstable _ surface such as a sloped table or any stand with a contact area smaller than the bottom surface of the unit stand e Placing the unit on a flat stable surface can prevent accidents from happening Ignoring this precaution may result in the Unit toppling over and causing injury DO NOT run power cords near _ heat producing appliances such as radiators stoves or irons wires resulting in fire or electric Be sure to place the unit on a level surface y AN T9 a Install the antenna away from high voltage
10. components may look different from the following illustration User s Guide User s Guide Remote Control 2 x AAA Battery Quick Start Guide Names of each part Basic Operation Front View OSD Menu D O 5 Operation DVD Insert a 12cm DVD CD with the label side facing towards the back 1980 SPIEMO apis jaqe yym OSIP H SU y Recording Operation LED Indicator Remote control window keep clear INPUT Display the input source menu MENU Display exit the OSD menu CH Scan through channels VOL Adjust the volume PLAY Play Pause DVD program EJECT Load eject DVD disc Turn on standby the TV set DVD Operation Maintenance and Service Names of each part Ou SWITCH le a TE E a O Basic Operation AC POWER IN OSD Menu O o yg O Ss Y Pb Pr VGA PC Audio COAX RF HDMI1 H phone Q AC POWER IN Connect to AC power supply SWITCH Turn on off the power supply Q Headphone Connect to your headphones or other audio equipment YPbPr Connect to the YPbPr video output sockets of external devices PC Audio Connect to the audio output terminal on the PC VGA For PC video input Connect to the VGA RGB plug on the PC COAX Digital output to AV receiver RF Connect an an
11. during use installation or transit power surges use of defective or incompatible external devices exposure to abnormal conditions such as excessive temperatures or humidity or entry of liquids objects or creatures into the product cockroach infestations or The customer is unable to provide proof of purchase of the product for verification or The serial number of the product is missing or has been tampered with Where any repairs or services required that are outside of the terms and conditions of this Warranty are requested by the customer or where a fault is determined to be outside of the terms and conditions of the Warranty during an In Home Service call the customer shall be charged for the cost of the repair and or the In Home service call fee No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it in connection with the sale of any equipment other than as stated in this warranty and outlined above TEAC and or its Authorised Service Centres reserve the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers retailers LCD dead pixel policy please contact TEAC at support teac com au for assistance Contents Safety Precautions POW ECE SUD A A E 1 Instalada a a 2 Usina Manten anciana cia 3 important Safety IASTUCIONS aiii A AAA AA A A A A di 4 5 User Guidance Information Wall Mounting tor Mal ai as 6 A A OO T Accessories Names of each
12. gt a Maintenance and Service 26 Multimedia Operation Supported Formats MOVIE The max bitrate is 6Mbps The max resolution is 720x576 pixels AVI Mono colour 16 colour 256 colour 16 bit 24 bit 32 bit The max PHOTO resolution is 3000x3000 pixels min resolution is 100x100 pixels MUSIC Sample rate 8K 48K Bitrate 32K 320K Special note 1 the Media Unit can only support USB memory devices such as hard disk drives and flash drives and will not support multimedia devices such as mobile phones and cameras for recording purposes 2 Unit will only support hard disk drives with additional power supply maximum disk partition size of 400GB and a maximum capacity of 1 5TB For optimum performance it is highly recommended that a hard disk drive with an external power supply be used for larger capacities 3 The maximum number of files that each folder can contain is 5000 files 4 When using external USB it is suggested that high quality USB extension cables supported 480mHz be used to ensure smooth playing of video files 5 The television unit can only support audio formats of single and binary channels Multimedia Operation Recording Operation c E ww y da O 2 le a gt a Maintenance and Service 21 Recording Operation Digital Video Recording DVR settings In DTV Mode only The PVR function allows this unit to record live digital TV DTV programs allowing for viewi
13. gt gt Fast forward Quick MENU Press D MENU to enter Quick Menu Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Preview Turn preview on or off Encode Type Select the encode type for the movie 25 Multimedia Operation Recording Operation c E ww y da O 2 le a gt a Maintenance and Service Multimedia Operation 4 Display Text To play text files most files with the extension txt select a file from the folder and press PLAY The Sorrows of Young Werther by JW von Goethe Translated by Thomas Carlyle and R D Boylan Edited by Nathen Haskell Dole The Sorrows of Young Werther g Werthe have carefully collected whatever have been able to learn of the story of poor Werther and here present il to you Knowing hank me for it To his spint and character you cannot refuse your admiration and love to his fate you will not deny your tears Press lt 4 gt to select options on the toolbar and press OK to change Press 0 9 to select specific pages Prev Next Turn to previous next file Press the EXIT button and select Back to return to the previous menu Quick Menu Press D MENU to enter Quick Menu Repeat Select the repeat mode from Repeat All Repeat 1 Off Background Music Enable or disable background music Encoding Type Change the type of encoding to suit different languages Multimedia Operation Recording Operation c E ww y da O 2 le A
14. part Front View ccooonnncoccnncccoconncnonnnocnnonocnononononnnonnnnnnnnnnnonnnnnnnnnrnnnnnnnnnnnenanenes 8 Names ofeach pan Back VIEW di 9 Remote CONTO luna 10 11 Basic Operation Basi ONO ae anton adidas A elo aroo iaa 12 13 OSD Menu PICTURE Meda das 14 ZAS UND MS iv 15 SC RANNEL Me suenos 16 18 AOC AP a a eae ata dha eecn a eee hoa 19 SETA reel ee nee A ee ene eee eee 20 21 Multimedia Operation MultiMedia OPE lallO Menane scat clase lis Ga a aN 22 27 Recording Operation o GING DST ANON srs Seiiatenccsseinecqassoscomeaweutagtantens oa saaeseoseni oars cueteueanaio mane ane siaumneisete amass am nwauaa aw aduanhosenemnacacionaameunenainioeca 28 32 DVD Operation DVD OO SY ATE ON asst dci 33 44 Maintenance and Service TNOUDIGSMOOUNG surero a E E aaqeateeesaitasuitaaauaeedeaasesereatoeagueades 45 5 PECIMMCA ION rra A A A AEA 46 47 Power Supply A Warning DO NOT touch the power DO NOT use a damaged DO NOT plug several devices Insert the power plug fully into plug with wet hands power cord or plug or a _ into the same outlet the outlet loose outlet 0 _ A congested outlet may cause A loose or improperly e Doing so may result in e Doing so may result in _ the outlet to overheat and stat inserted power plug electric shock fire or electric shock a fire may result in fire User Guidance Information Basic Operation DO NOT bend the power cord gt excessively or place heavy object
15. specifications 3 c E y fess O 2 le A gt a Maintenance and Service DVD Operation Basic Operation Press the Power button on the TV or the remote control then press the INPUT button to select DVD mode If there is no disc in the DVD player the screen will show NO DISC Insert a disc with the label facing the correct direction according to the picture next to the disc slot Do not touch the disc s reflective surface Hold the disc at the edges with your fingers and gently place the disc into the slot The player will automatically draw the disc into the player To eject the disc press the EJECT button on the TV or the EJECT 4 button on the remote control DVD Setup Mode e Setup Mode provides the menu for the configuration of General Setup Page Audio Setup Page Dolby Digital Setup Preference Page e Item selection in the Setup Menu is done by using the Navigation Arrows SETUP button and the OK button e Press the SETUP button first enter into SETUP menu then press the DIRECTION RIGHT button you can enter into the next Sub menu e Press the SETUP button again to exit the Setup Menu OSD Language This is used to select the OSD language lt S 5 General Setup F nage ae osD Lang Screen Sawer Bond miir eiiie T Last Memory ewan S ie rar be Q a le a gt a Maintenance and Service 38 DVD Operation Screen Saver Enable the screen saver
16. then press the button to play the selected media in full screen In full screen mode you can access playback controls at the bottom of the screen by pressing the OK button and press EXIT to hide it Press M to stop and exit the full screen program Recording Operation c E ww y da O 2 le a gt a Maintenance and Service 23 Multimedia Operation To access photo audio video or text files from an external drive first choose USB Input then select the type of media to be played to enter the folder file navigation screen 1 Photo To display photos select files from the folder and press PLAY to view in full screen The image should appear on screen as illustrated below To play background music during a photo display first enter the music playing menu and start music playback Ensure that Background Music is set to ON via the Quick Menu Next return to the Photo file navigation Start the photo display while the music continues to play Press 4 gt to select options on the toolbar and press OK to change OK Start playback pause photo viewing Previous Next Display the previous next photo Rotate Rotate the photo clockwise counter clockwise EXIT Press the EXIT button and select Back to return to the previous menu Quick Menu Press D MENU to enter Quick Menu Interval Time Adjust slideshow frames interval time Repeat Select repeat modes from Repeat All Repeat 1 Repeat None Sid
17. E 5 Operation If Lock is enabled Auto and Manual Scan are password protected Key in the correct password Default password 0000 HHE Auto Scan D w i aa Press OK to enter the auto scan option pa y es 32 Select the desired Country and Tune Type y m using the lt gt buttons then press OK to gt start scanning Auto Scan Country Australia NOTE Mode DTV Start IfATV DTV option is selected the first 50 of the scan will be for ATV tuning while the second half would be for DTV tuning If desired the user has the option to exit the tuning process midway by pressing the EXIT button a OK Select MENU Return EXIT Exit DVD Operation Maintenance and Service 16 OSD Menu Digital Manual Scan Press the OK button to enter the Digital Manual PA AS Scan menu Select a DTV channel and press OK to start Digital Scan a an Sore searching Start Frequency 585 50 MHz Frequency Press 4 buttons to select Frequency Strength 78 Auto or enter digital numbers Strength Displays the signal strength Note DTV is able to receive DVB T signal not 2 Move 4 Adjust 0 9 Input MENU Return EXIT Exit DVB T2 signal Analog Manual Scan Press the OK button to enter the Analog Manual m E ay Ta Scan menu Analog Scan Press 4 buttons to select frequency 7 A a Channel to Save Select a channel number Channel to Save Color Sound System Select a TV system for sound tar searchi
18. Schedule Record Display the list of scheduled recordings and reminders OAD Display a menu to check for new firmware available on broadcast Restore Factory Default Select to erase all custom settings and return to factory defaults If Lock is enabled this requires password access System Info Display system information 21 OSD Menu By D O 5 Operation DVD Operation Recording Operation Maintenance and Service Multimedia Operation USB Usage Precautions Never turn the unit off or disconnect a USB Storage Device Flash Drive when it is being accessed Doing so could damage the TV and the connected USB storage device e Do not use a device that has a maximum current consumption of 100 mA or more e Do not use a device that has security functions or other special functions e Do not use a device that is divided into two or more partitions e A USB hub cannot be used to connect USB devices to this unit USB storage devices that can be played on this unit e Only USB Storage Device Flash Memory maximum 16GB can be used Do NOT use a high capacity USB hard disk with this unit e Some flash memory players that charge from USB terminals cannot be used for playback e Hard disk drives CD DVD Drives and other devices connected via USB cannot be used e This unit cannot copy or move files e Playable formats FAT16 FAT32 Depending on the condition of the USB flash drive this unit might not be able t
19. TEAC LEV40GD3FHD LED IV WN D USER MANUAL IMPORTANT WARRANTY INFORMATION INSIDE PLEASE READ TEAC warranty PROCEDURE eae Please read the owner s manual carefully and ensure that you have followed the correct installation and operating procedures 1 Please read this warranty card 2 Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service 3 If you require Warranty Service please contact the TEAC Warranty Service Hotline at 1300 553 315 for assistance Please ensure that you have the model number serial number and purchase receipt ready when you call Please complete the section below and keep this information for your own records Owner s Name Owner s Address Postcode Model Name No Serial No Dealer s Name Dealer s Address Postcode Thank you for selecting a TEAC product If your TEAC product malfunctions please call us directly for warranty support between Monday to Friday at 8 30AM 5PM AEST at the TEAC Warranty Service Hotline 1300 553 315 For other enquiries please contact us at www teac com au When calling to receive warranty service please have 1 Your model and serial number 2 Proof of purchase 3 And your product in front of you NOTE You are required to provide a copy of your proof of purchase in order to have your claim processed Please read the Terms and Conditions for details of your warranty entitlement 10
20. amaged please contact customer service User Guidance Information Screws supplied Stand 4x ST4 x 12F 2 How to install the Stand Place the TV face down on a soft and flat surface blanket foam cloth etc to prevent any damage to the TV Put the stand to the neck of the TV set as shown below Basic Operation 1 Before you put on the stand please make sure the direction is correct as shown below 2 When you are putting on the stand please make sure the neck of the TV set is in the correct position and attached tightly If you do not attach the stand correctly it will make the TV unstable and may tip over OSD Menu an Hf I H a ia a e Ns H Operation D O 5 AMT HRT LV 1 When attaching the stand make sure the screws are attached tightly If the screws do not attach tightly it will lead the TV to be unstable or may even tip over 25 E o E 3 Warnings O a It can not be tilted to the front or back as b It can not be tilted to the right or left as shown below Doing so may damage the shown below Doing so may damage the stand stand Top View DVD Operation l l l l l l l l E Jl LT Maintenance and Service Accessories e The configuration of the
21. ast when displaying still images User Guidance Information Basic Operation OSD Menu D O 5 Operation DVD Operation Recording Operation Maintenance and Service Basic Operation OSD Menu D O 5 Recording Maintenance Operation Operation DVD Operation and Service Important Safety Instructions Warnings and Precautions To prevent any injuries the following safety precautions should be observed in the installation use servicing and maintenance of this equipment Before operating this equipment please read this manual completely and keep it nearby for future reference 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Clean only with a dry cloth 6 Do not block any of the ventilation openings Install in accordance with the manufacturer s instructions 7 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 8 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety When the provided plug does nat fit into your outlet consult an electrician for replacement of the power socket 9 Do not bend the powe
22. ctronic Program Guide EPG Press the EPG button to display the OSD menu as below 07 Dec 2005 17 35 10 PROGRAM GUIDE 07 Dec 2005 14 30 07 Dec 2005 18 00 Details information gt of selected program 002 YLE TV2 18 00 Program list for the 19 40 Itsenaisyyspaivan paraati Lahdessa current channel 20 15 Tanaan otsikoissa gt Press direction 21 10 Tohtori Ben Casey 22 00 Rakkauksia buttons to navigate the lists Reminder PrevDate NextDate Rec Record OK Display EXIT Exit Once the program of choice has been highlighted press the REC button on the remote control This will bring you to Record Mode where you can set the start and end time of the recording Schedule List Group 3 Sefing Stas iz 3 rot Recorded Mode Setting the Recorded Mode The TV will record the program automatically according to the ga Mode Once set time 7a a a So ne MODE Select the record mode io StartTime lt 200512077 P gt Channel Display the name of the recording program Ea eS l Adjust 3 Start Time Set the start time 9 A End Time Set the end time EMT Ext Press OK button to save the setting and exit the menu NOTE If channel locks or parental control locks are enabled the locked programmes and channels can be recorded viewed and played back on this TV using password access Key in your current password when the password prompt pops up While recording is in progr
23. e 1 The Media Unit can only support USB memory devices such as hard disk drives and flash drives and will not support multimedia devices such as mobile phones and cameras for recording purposes 2 Unit will only support hard disk drives with additional power supply maximum disk partition size of 400GB and a maximum capacity of 1 5TB For optinum performance it is highly recommended that a hard disk drive with an external power supply be used for larger capacities 3 The maximum number of files that each folder can contain is 5000 files 4 When using external USB it is suggested that high quality USB extension cables supported 480mHz be used to ensure smooth playing of video files 5 The television unit can only support audio formats of single and binary channels 0 o Oo T F co wf Es oS Sos 47 TEAC In the event of a product failure within the warranty period please call the TEAC Warranty Service Hotline 1300 553 315 Between Monday to Friday 8 30AM to 5PM AEST Please have your purchase receipt and the product s serial number ready For other enquiries and support please visit www teac com au
24. e Adjust the relative intensity of higher pitched sounds Bass Adjust the relative intensity of lower pitched sounds Balance Adjust the balance of the left and right sound track or turn off the volume of the left or right sound track Surround Sound Turn on off the surround sound function by selecting off on EQ Setting Adjuse the curve of 7 bands equalizer AVL Control the volume of the program automatically Turn on the function by selecting On SPDIF Select from the following options Off PCM and Auto Sound Type Select from Left Right Mixed Stereo 15 OSD Menu D O 5 Operation DVD Operation Recording Operation Maintenance and Service OSD Menu 3 CHANNEL Menu This menu selection contains scanning preferences either automatic or manual tuning Channel Auto Scan Manual Scan Channel Edit Signal Information Settings can be altered for individual channels lt NOTE Some menus are Ta e available only in DTV Mode while recording is not in progress Channel Auto Scan Manual Scan Channel Edit Favorite Manager Signal Information MENU Return EXIT Exit OSD Menu Description Press the MENU button once to enter CHANNEL setup menu as shown above Press OK to enter the submenu In the CHANNEL setup menu press the va buttons to select the desired item Press the MENU button to return to the previous menu Press the EXIT button to exit D 0
25. e OK gt button on the remote control to lock the channel Press the OK button a second time to unlock the channel Parental Rating Allows you to select the Program Rating threshold to lock programs by rating New Password You can set a custom password by keying it in twice Clear Lock Select this option to erase all password settings including resetting the password to default 0000 19 OSD Menu D O 5 Operation DVD Operation Recording Operation Maintenance and Service OSD Menu 5 Setup menu The option settings allows alterations to the language and regional settings PO Time Settings OSD Language English Restore Factory Default Audio Languages System Info Subtitle Teletext Blue Screen HDMI CEC Control DVR Settings OK Select MENU Return EXIT Exit E Move MENU Return EXIT Exit Description Time Settings Clock Use the 4 gt buttons to select the PA E ay 5 position and the wa buttons to set the time 0 Time Settings NOTE The time cannot be changed manually in Clock a DTV mode because the clock is synchronised Aen ne with the broadcast signals received Sleep Timer Time Auto Sleep Power on Timer Turn on off the power on timer Time Set the power on time A Aude ede Power On Source To select source ATV DTV Power On Channel To select power on channel Power Off Timer Turn on off the power off timer m a m thy Time Set the power of
26. en switched on which may result in a fire outbreak Always have two or more people _ dust on the power plug pins with a clean dry cloth at hand to lift or move the unit e If the unit is dropped it could get damaged or otherwise Cause injury DO NOT insert any metal objects such as a screwdriver paper clip or a bent wire into the ventilation openings or A V _ terminals Doing so poses a serious risk Of fire or electric shock When moving the unit be sure to turn off the unit and unplug the power cord from the wall outlet e Moving the unit with the power cord connected to the outlet may cause damage to the cord resulting in fire or electric shock Wipe off any moisture dirt or e Failure to do so may result in _ fire or electric shock DO NOT allow children to climb onto the unit e The unit could topple over onto a child and result in serious injury If you notice any unusual odors _ or smoke around the unit 1 immediately disconnect the unit from the outlet and contact the _ service center Failure to do so may result in fire or electric shock _ Always turn off the unit and unplug the power cord when cleaning the unit Use a soft dry _ cloth to clean the unit Never clean with irdustrial _ strength polish wax benzene paint thinner air freshener _ lubrica
27. eshow Effect Select the Sideshow Effect from Fade In Fade Out Background Music Play pause music You can only play or pause the music you have selected Multimedia Operation E 2 Music To play audio files select a file from the folder and press PLAY to start the music Recording Operation Information about the music file is displayed on the screen S e par G pa Q Q le a gt a Maintenance and Service 24 Multimedia Operation Press 4D to select the option on the table and press OK to change Press WA to search for music and press OK to select Press the EXIT button and select Back to return to the previous menu Quick Menu Press D MENU to enter Quick Menu Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Background Music Turn on off background music for musical photo text display Sort Sort the file list by File Size or File Name Screen Mute Press the BLUE button to switch off the screen display NOTE This is NOT Standby Turn the screen on with any button on the remote other than the STANDBY button 3 Movie To play video files select a file from the folder If Preview is turned on the video will start playing in a window on the side Press PLAY to start watching the video in full screen Press 4 gt to select options on the toolbar and press OK to change de Previous chapter gt gt Next chapter Il Play Pause program 44 Fast reverse
28. ess for a locked channel you will still need to key in the password to watch that channel This does not interrupt the recording process c E ww y da O 2 le a gt a Maintenance and Service 32 DVD Operation Preparation 1 Connect the unit to the power supply and press the button to switch the unit on 2 Press the INPUT button on the remote control to select DVD mode and press OK to select DVD mode 3 Gently insert the disc with the label side away from the television into the disc tray slot The disc will be drawn into the disc tray and loaded automatically 4 Press the EJECT button to eject the disc The disc cannot be drawn into the disc tray by pressing the EJECT button again The disc must be manually pushed into the tray until it is drawn in automatically o o NOTE DVD mode must be selected before inserting the disc The contents of each disc may vary as to how the disc was authored and what features are included Some discs have an autoplay function Some offer different modes such as Menu Play Sequence Play and other modes as illustrated below Menu Play Compatible with DVD SVCD or VCD2 0 2 Ifthe disc is a DVD a ROOT MENU will appear on the screen If it is SVCD or VCD 2 0 please press the Menu button to see the menu 3 When a DVD disc is loaded use the toggle buttons to highlight the menu item you would like to choose With SVCD or VCD 2 0 press the numeric button
29. ete REC program REC LIST Record List a A SS SCH LIST Display Scheduled Recordings list MENU A EXIT SCREEN 1 While playing music press this button to turn off the LED TV screen E VE 2 While in HDMI input press this button to change between Video and PC l mode 3 While in VGA PC input press to auto align screen Delete Reclist IMIS Screen OSD Menu MENU Press to display the OSD menu EXIT Press to exit the OSD menu CURSOR KEYS A V gt OK Allows you to navigate through the on screen menus and adjust the system settings to your preference EPG To show the Electronic Program Guide Operation y O 5 2s a al INFO Press to display the current mode s information E k e CH A V Channel Program E E gt VOL lt gt Volume Not available in DVD Input mode x MUTE Press to mute the sound press again or press VOL to unmute gt gt MEDIA e O Enter to DVD mode Aspect Subtile Audio D Setup 3D No function DVD Operation 240602000542 Maintenance and Service 10 Remote Control INPUT Picture Sound Sleep 3D Basic Operation Buttons for USB DVD operation REC Press to start recording the program in DTV mode Press REC to select the repeat mode in DVD and USB Mode Load eject DVD disc Stop program Previous chapter Next chapter Play Pause program 44 Fast reverse gt gt Fast forward
30. f time Multimedia Operation Time Dc OSD Time Lets you adjust the amount of time Power on Timer On E the On Screen Menu stays on the screen Time 00 00 00 i Power On Source DTV 282 before disappearing ona e Power Off Timer Oi 00 00 Sleep Timer Set the time span before the unit goes MILE to sleep from the following selections 5min 15min 30min 60min 90min 120min 240min and OFF 2 Move gt Adjust MENU Return EXIT Exit Auto Sleep Turn the automatic standby function on off When activated the unit will switch to standby if it has not received any signal input for an extended period of time 3 4 5 hours c E ww y da O 2 le a gt a Maintenance and Service 20 OSD Menu OSD Language Select the language option for the OSD menu Audio Languages can be selected in DIV mode Allows you to select first and second audio language Subtitle can be selected in DIV mode Allows you to select first and second subtitle language Teletext Adjust Teletext settings Only available under DTV and ATV source Blue Screen Turn on off the blue screen HDMI CEC Control Turn on off HDMI CEC Control DVR Settings Use the wa buttons to select the DVR Settings then press OK to enter For more about DVR Settings please see Recording Operation File Manager Display and maintain the list of recorded programs Device List Display the connected USB device with the Format option
31. g DVD playback you can input desired title numbers directly 2 During sequence playback of a SVCD or VCD disk press the numeric buttons to select tracks During Program Playback and when the playback control PBC is on you can only press Prev M4 Next MH button to select As for CD HD CD discs press Numeric buttons directly to select tracks When playing WMA Digital Audio disc JPEG discs press Numeric buttons to select different tracks on current track list Skipping Tracks c E ww y da O 2 le a gt Q Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 1 To skip forward to the beginning of the next title chapter track on a disc press Next PMH on the remote or the right side of the player 2 To skip backward to the beginning of the preceding title chapter track on a disc press Prev M4on the remote Maintenance and Service 34 DVD Operation Multispeed Fast Motion Play Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio discs 1 Press the Multispeed Fast Forward button on the remote during play to search through a disc Multispeed Fast Forward has four speeds x2 x4 x8 x16 x32 With each consecutive press of the button the search speed increases If you press the button five times it would resume normal play 2 During DVD playback normal play resumes when Fast Forward reaches the beginning of the next title chapter During SVCD or VCD play with
32. lapsed time Disc Type Title Title being played Total number of titles Chapter Chapter being played Total number of chapter Time Countdown of total time SVCD Display feature When the DISPLAY button is pressed repeatedly while a SVCD is being played the response will show as follows e Disc Type Track Track being played total tracks Mute PBC Repeat Mode Elapsed Time e Language Language being played Total Number of languages Language Type Audio Type Subtitle Subtitle being played Total number of subtitles VCD Display Feature When the DISPLAY button is pressed repeatedly while a VCD is being played the response will show as follows e Disc Type Track Playing track Total Number of tracks Mute Repeat Mode Elapsed Time E eS thea O 3 le A gt 2 CD HD CD WMA Digital Audio JPEG Discs Display Feature When the DISPLAY button is pressed repeatedly while a CD HD CD WMA or Digital Audio JPEG disc is being played the response will show as follows e Disc Type Track laying track number Total Number of tracks Mute Repeat Mode Elapsed Time Maintenance and Service 36 DVD Operation Using the Search Feature Compatible with DVD SVCD VCD CD HD CD discs Press the GOTO button on the remote control to bring up the search Display Feature menu Il Press the Arrow buttons to highlight the Title Chapter Track Number Time Elapsed options Ill Use the Numeric button
33. n screen television display should appear First Time Installation Basic Operation 1 The First Time Installation menu will appear on your screen 2 Select Type OSD Language Country Auto Scan Time Zone then press the OK button to start the tuning process This process will find all available channels and store them First Time Setup he Mode Setting OSD Menu Start Star Please select the type of use for this TV z ah QUO fapio ninpi ho i Home Use optimizes the picture recommended for normal home use and is energy efficient Store Demo optimises the picture for store display We strongly recommend you select Home use Move 4 Adjust MENU Retum EXIT Exit Operation y O 5 Mode Setting Start Please select the type of use for this TV Home Use optimizes the picture recommended for normal home use and is energy efficient Store Demo optimises the picture for store display We strongly recommend you select Home use Move lt gt Adjust MENU Retum EXIT Exit Recording Operation NOTE Home Mode is a power setting that is designed to suit home usage and the Energy Star Rating of this TV is based on Home Mode Home Mode is highly recommended for the best energy efficiency Shop Mode is a power setting that is designed to suit shop display Energy use is not optimised and picture settings may reset automatically DVD Operation Maintenance and Service 12 Basic Ope
34. ng AFC AFC Turn on off the auto frequency control function sd Star Press 4 gt buttons to manual search 2 Move lt gt Adjust 0 9 Input MENU Return EXIT Exit v NOTE Press the RED button to save any changes to the settings Channel Edit The Channel Edit menu offers the user to make personal changes to the program listings Various options are subjective to Analog TV and Digital TV programs Press the OK button to enter the Channel Edit menu from the CHANNEL menu as shown below If Lock is enabled Channel Edit is password gt protected Key in the correct password ra f yy a pa Default password 0000 S amp Channel Edit 001 YLE TV1 002 YLE TV2 005 YLE FST 008 YLE 24 009 YLE Teema 003 YLEN KLASSINEN 004 YLE FSR RARCAAA Hi Delete MMWSkip Move HM Rename Move gt Page MENU Return EXIT Exit 17 OSD Menu By D O 5 Operation DVD Operation Recording Operation Maintenance and Service OSD Menu Delete Select the channel to delete and press the RED button A confirmation message will pop up Choose Yes to confirm the deletion or No to cancel Select the channel to be moved and press the BLUE button Use the CH buttons to Move change the channel position Press the BLUE button again to confirm the change Press the MENU button to save and exit Skip Select a channel and press the GREEN button to mark the channel As long as the channel ha
35. ng on demand at any time This function supports DTV program recording Time shift and playback as described below DVR will only record when there is an external USB drive connected to the unit with sufficient memory space available Recording can be done both manually on demand and also using Scheduled Recording NOTE e When DVR function is in progress DO NOT unplug the power or the external USB device at will e When DVR function is active the power indicator will blink with red and green colours consecutively e Before the start of a program recording please make sure the external USB device is connected e Pre recording if the available storage space is low a warning message would appear before recording e While recording If available storage space becomes low the recording will be automati cally stopped This recoding function is only suitable for DVB T not suitable for DVB T2 or analog signal DVR Settings Cyl WOM VIDEOS Device List Scheduled Record Recording Operation c E ww y da O 2 le A gt a Maintenance and Service 28 Recording Operation File Manager Current Playing File info Channel Name Program Name Recorded Time 07 Dec 2005 17 35 Total Time 00 03 43 enta Rating None Red button Delete One program Green button Delete All programs Yellow button Replay the program Blue button Zoom In Out between full screen view and preview mode Af
36. nt detergent or other 1 such chemicals Also do not clean with a damp cloth DO NOT dismantle or modify the unit in any way Do not attempt to service the unit yourself e Doing so may result in fire or electric shock If the unit requires repair contact the _ service center BGO 3 A Warnings _ When removing the batteries from the remote control make _ sure children do not swallow _ them Keep the batteries out of _ the reach of infants and children e If a child has swallowed a battery seek medical attention _ immediately Do not display still images and partially still images on the LED panel for more than 2 hours as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention reduce the degree of brightness and contrast of the screen when displaying a still image Watching the LED TV in 4 3 format for a long period of time may leave traces of borders displayed on the left right and centre of the screen caused by the difference of light emission on the screen Playing a DVD or a game console may cause a similar effect to the screen Damages caused by the above effect are not covered by the Warranty Displaying still images from Video games and PC for longer than a certain period of time may produce partial after images To prevent this effect reduce the brightness and contr
37. o play the files on it or skipping might occur NTFS HFS and HFS formats are not supported and cannot be used Max number of playable folders 200 Max number of playable files 999 If the USB storage device contains more than 999 files or 200 folders this unit cannot play it back correctly This unit cannot play files that are larger than 2GB Files with variable bit rates might not play correctly Multimedia o Operation File information display e The display of this unit can only show single byte letters and numbers e If the file information contains Japanese Chinese or other double byte characters playback is possible but the name will not be shown correctly Recording Operation c E ww y da O 3 le A gt a Maintenance and Service 22 Multimedia Operation Basic Operation 1 Press the INPUT button on the remote control to display the input source menu and select USB with the wa buttons Press the OK button to enter the Multimedia menu as shown below SOURCE pA kw ATV AW YPbPr HDMI 1 HDMI 2 HDMI 3 PC USB DVD 2 Press 4D to select the type of media you want to play from the connected USB device as follows PHOTO MUSIC MOVIE and TEXT Press wa to select the device and press OK button to enter Return to device list Hints for operation Multimedia Operation Press wadp to browse through the files Press the OK button to select the file or access the folder
38. power lines and communication cables Make sure it is installed securely If the antenna touches a power line contact with the antenna may result 5 2 2 infi lectric shock i injury S Doing so poses a serious risk outbreak ahok in fire electric shock or serious injury of overheating and a possible fire E 0 Y outbreak 4 MEET AS or a A x BRD A la A ML DVD Operation The following precautions are divided into Warnings and Cautions Disconnect this device from power by turning the power off at the AC power outlet and unplugging the AC plug Warning Ignoring this precaution may result in death or serious injury Caution Ignoring this precaution may result in injury or property damage Maintenance and Service Use and Maintenance Although the LED screen is made with high precision technology and 99 99 or more of the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LED screen This is a property of the LED screen and is not a malfunction Warnings Disconnect the power cord from the power source during a thunderstorm e Not doing so may result in fire or electric shock When not using the unit for long periods of time discon nect the power cord from the wall outlet e If not cleaned clogged dust particles at ventilation holes could cause the unit to heat up and ignite wh
39. r cord excessively Prevent the cord from being walked on or pinched by weights placed on it 10 Only use the attachments accessories specified by the manufacturer 11 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus Ea Important Safety Instructions 12 Unplug this apparatus during lightning storms or when unused for long periods of time 13 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this unit This symbol indicates that there are important operation and maintenance instructions in the literature accompanying the appliance NOTE a To prevent damage which may result in fire or hazards the unit should not be exposed to rain or liquids b Do not place objects containing liquids such as vases on the unit If drinks or liquids have been spilled on the unit unplug the unit from the power source and refer to TEAC service personnel for assistance C Servicing of this unit should be conducted by qualified and certified TEAC service personnel d The manufacturer will not be held responsible for any damage caused by any modifications done on the product without authorisation from the manufacturer s authorised service
40. ration Selecting an input source SOURCE The unit incorporates multiple input sources which can be selected via the E INPUT button on the television panel or remote control The following ATV steps explain the procedures involved AV 1 Press the INPUT button to enter the Input menu The screen will YPbPr display the Input Source menu HDMI 1 HDMI 2 HDMI 3 PC USB DVD 2 Use the CH button on the TV set or A V direction buttons to select the desired input source 3 Press OK to enter the selected source NOTE Please make sure the device is connected before selecting the input source Using the On Screen Display Menu The On Screen Display OSD menu acts as the Main Menu and aids the user in browsing through the different options properties available on the television unit Press the MENU button on the remote control to access the OSD menu as shown below Basic Operation S 0 a Main menu 4 ON SOUND Picture CHANNEL srr i LOCK aa DE gt Picture menu l _ ke P a Saturation E Hue Color Temp Red D 6 Ce o 00 y 2 NO Hint you should operate the OSD menu according to the hint Use the lt gt direction buttons to make a selection from the main menu PICTURE SOUND CHANNEL LOCK or SETUP Press V button to enter the submenu system Once in the submenu use V A buttons to select an item Press the OK button to access the selected item to make changes to the settings To re
41. riods Table below from the date of purchase Commercial use products are covered for 12 months only Authorised Service Centre a ae SIZE TV WARRANTY PERIOD WARRANTY SERVICE TYPE excluding commercial use products from date of purchase 42 and above 12 months PA 42 and above 19 to 40 12 months Authorised Service Centre Service All other TEAC products 12 months Authorised Service Centre Service In Home Service Pick up Service This service will only be provided as part of this warranty if all the following conditions are met a The product is indicated in the Warranty Period Table b The product is within the warranty period c The product is located within the normal service area of the local TEAC Authorised Service Centre If TEAC determines that the product is not repairable on site TEAC can complete the repair by taking the product to a TEAC Authorised Service Centre Authorised Service Centre Service The purchaser is required to send the product at their own expense to the nearest TEAC Authorised Service Centre for repair In this event proof of purchase is required to support a warranty claim After the repair the product will be available for collection by or return to the purchaser at a fee upon request TEAC in home service can be made available at a fee upon request A 12 month replacement warranty is applicable to all Accessories such as Remotes Power Adapters and Cables TEAC will ensure to the best of it
42. s a skip label it will be skipped when you search through the channels with the CH buttons Rename Select a channel and press the YELLOW button then to change the name of the channel using CH buttons and Number buttons Favorite Manager Favorite Manager Fave OSD Menu D O 5 Operation First press V A button to highlight a desired channel Press the Red button to set it to the Favourite 1 group Press the Green button to set it to the Favourite 2 group Press the Yellow button to set it to the Favourite 3 group Press the Blue button to set it to the Favourite 4 group Signal Information Displays the signal information in DTV mode Recording Operation DVD Operation Maintenance and Service 18 OSD Menu 4 LOCK menu This option allows parents to block channels and programs using a password NOTE The default password is 0000 If you have forgotten your current password the master password is 8899 Please take note of this pa a E a es A A Lock System Enter Password Enable Channel Locks Parental Rating New Password Clear Lock MENU Return EXIT Exit Description Enable Turn on off the Lock Channel function Note You are required to enter a password to access this menu Default password is 0000 Channel Locks When a channel is locked you must enter your password to view the channel Use the wa buttons to select the channel and press th
43. s abilities that all required parts are made available for any required service repair TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product repairs within a reasonable period based on available resources and workload during the time when service is requested and performed Refurbished parts may be used to repair the product In the case of a replacement the product may be replaced with a refurbished unit of the same type or if one is unavailable a similar refurbished model with equal or better features and specifications Please be advised that if the product presented for repair is capable of retaining user generated data the data may be lost during servicing Customers are strongly encouraged to back up all important information data before sending the product in for service repair Service will be provided only during normal business hours and under safety conditions and circumstances TEAC and its authorised service agents can refuse any repair if safety in relation to OH amp S becomes a concern to its staff or authorised service agents personnel The warranty is void and warranty claims may be refused subject to the Australian Consumer Law if The product was not transported installed operated or maintained according to manufacturer instruction or The product was abused damaged tampered altered or repaired by any unauthorised persons or Product failure is due to accidents
44. s on it e Doing so may result in fire or electric shock OSD Menu y O 5 Operation When disconnecting the _ Always unplug the unit before De power cord from an AC Cleaning 3 2 A always grasp it by al desen The purpose of these precautions is to 5 O pd fire or electric shock ensure user safety and prevent property Ge e Pulling on the cord damage d the internal wire led Be sure to read and observe all safety and may result in a fire precautions It is the responsibility of the user to make sure all precautions and warnings are heeded and followed DVD Operation Maintenance and Service User Guidance Information Basic Operation y O 5 Operation Recording Operation Installation A gt DO NOT place containers with liquids such as vases drink cans bottles or small metallic objects on top of the unit e If liquid enters the unit or any metal object falls into the unit it may result in a short circuit fire or electric shock DO NOT place a burning candle burning incense or lit cigarette on top of the unit DO NOT place the unit near any heat source such as a fire place or space heater Install the unit at an adequate distance from the wall to ensure sufficient ventilation Insufficient ventilation may result in the unit overheating which may
45. s to enter the Title Chapter Track number or Time you would like to view in the title IV Press OK to resume playback To illustrate entering 01 23 56 on the Time Elapsed selection will start the playback from that time frame forwards NOTE a This feature does not work in Program Play mode b If PBC is on it will turn off automatically when Search Playback starts c When playing WMA MP3 JPEG discs Search Feature does not work Changing the Audio Soundtrack Language Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs This function varies in its purpose for different disc types Press the AUDIO button to display the current Soundtrack being played Audio Selection for SVCD or VCD There are five audio selections available Stereo L R L L R R L L Auto A D Detect and R R Auto A D Detect With each consecutive press of the button the audio selection cycles through these options For example if you press the button six times the audio selection cycles back to Stereo Audio Selection for CD HD CD WMA Digital Audio Discs There are three selections available Stereo L R L L and R R Audio Selection for DVD and SVCD When playing a DVD or SVCD disc press the AUDIO button to display the current audio language Press the button again to browse and select the next supported audio language NOTE Certain DVDs have limited language selections or none at all Subjective to manufacturer
46. s to select a track to play c E ww y da O 2 le a gt a Press OK or Play to start when highlighted Return to Menu when Playing When playing a DVD disc press the Menu button to return to the ROOT menu When playing a SVCD or VCD and Playback control PBC is on press the Menu or Return button to return to the disc menu Maintenance and Service 33 DVD Operation Title Play 1 DVD disc dependant only according to DVD manufacturer specifications During DVD playback press Title button to display the DVD title content and main menu Press the A V buttons to highlight the title you would like to choose and press OK you can also opt to press the numeric buttons 4 The DVD player begins with the chapter 1 of the chosen title Sequence Play 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 2 When a SVCD or VCD disc is loaded and playback control PBC is on press the MENU button once to switch PBC off The player can now playback in sequence mode To turn PBC back on press the MENU button again 3 When the disc is stopped press the Play button to start play back in Sequence mode This is for all compatible discs except VCD and SVCD Additional operations Selecting Tracks Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 1 When playing a DVD disc press the numeric buttons on the menu or title page to select tracks Durin
47. scs with parental lock function you may select an Age Control Grade according to disc rating and your own preference For example if PG is selected DVD Video disc rated higher than PG cannot be played e KID SAF e G e PG e PG13 e PGR e R e NC 17 e ADULT Preference Page Peet N EAU Subtitle Disc Menu 3 PG Parental Password Default _ Set Parental Control Password User can change the password that is required when the user wants to change the Age Control Grade in the Parental Lock function NOTE Default password is 123456 pa Preference x BAU Subtitle Disc Menu Parental Password Default S E ge G pun 9 Q O Change Password a Maintenance and Service 43 DVD Operation Old Password_ Confirm Default Reset the DVD settings to the original factory settings by choosing RESET and pressing the OK button TE gt lt a Preference Page ae A A A A Disc Menu Parental Pas sword Load Factory Setting S e h Q 2 le a gt a Maintenance and Service 44 Troubleshooting Do not use other functions that are not mentioned in this user manual lf a problem occurs with your LED TV please take the following steps first f you still have the problem turn the power off and contact your dealer or an authorized service center Problem The picture does not appear The picture appears too slowly after the power is
48. tenna or a 75 Ohm coaxial cable to receive a TV signal HDMI1 2 3 Connect to the HDMI output of external devices like DVD players with a HDMI cable USB Connect USB storage devices hard disk drives VIDEO Connect to video output terminal of external devices R L in Connect to the audio output terminal of external devices shared with YPbPr y O 5 Recording Operation Operation DVD Operation NOTE Before making or changing cable connections please make sure that power to the unit is completely disconnected by switching off the power supply and unplugging the power cable from the wall outlet Maintenance and Service Remote Control eFunctions of remote control buttons The remote control is using Infra Red IR Point it towards the front of the TV The remote control may not work correctly if it is operated out of range or out of angle 1 Turn the TV on back to Standby mode aa INPUT INPUT Display the input source menu Picture Sound Sleep 3D PICTURE Press repeatedly to cycle through the available video picture modes SOUND Press to cycle through the different sound settings SLEEP Repeatedly press to scroll to preferred off time NUMBER BUTTONS Choose channel directly Press number buttons to view 7 Cu 7A the channel EES E rd CO Return to the previous channel viewed gar 0 R CH FAV Displays Channel List and the Favourite Program List Basic Operation DELETE Del
49. ter the recording has been done the stored programs can be viewed through a Recorded List by pressing the LIST button on the remote control To play the items press OK on the remote to select the recorded program To delete the program from the list press the RED button Recording Operation c E ww y da O 2 le a gt a Maintenance and Service 29 Recording Operation Device List m p 4 levice Available Space File System Formal USB17 NOTE NOT all USB devices such as phones MP3 players cameras and the like are compatible with recording files Please use USB Flash Drives or external HDDs with a separate power supply The USB drive has to be formatted before any recording can be done to ensure that it is in the correct file system format and that there is enough data space for recording WARNING Ensure that no valuable information is currently stored in the hard disk as the formatting process means that ALL DATA will be ERASED from the memory drive connected to the USB HDD port TEAC does not take responsibility for lost data Recording Operation c E ww y da O 2 le A gt a Maintenance and Service 30 Recording Operation Schedule List ung List 7 Dec 2005 Wed 17 36 Channel Delete One Delete All Move Up Move Down K Select ENU Retum Exit CAI Red button Delete One scheduled program Green button Delete All scheduled programs
50. the screen saver image will appear when the player stops or the picture is frozen for a few minutes Screen saver will prevent image burn and screen damage e On Start the screen saver e Off Remove the screen saver IS o General Setup Page AE MN _ Screen Saver p Off Last Memory off Screen Sayer Last Memory The Last Memory function can memorize where disc playback was stopped and resume from there when the same disc is inserted again This function can memorize up to 4 discs and is dependent on the disc content Select On enable the function and Off to turn it off e On Start the memory e Off Remove the memory De i Ed General Setup Page ai LAN Screen Last Memory ofr ory r on Off A Set Last Memory State 39 S e h Q oa le a a Maintenance and Service DVD Operation e Speaker Setup In the Audio Setup page press W button to select the Speaker Setup option then press OK or gt button play into the Speaker Setup Page C 0t na Audio Setup Page ad oe PEA O Go To Audio Setup Page Downmix e LT RT Select to downmix multichannel audio soundtracks to LT RT channel output e Stereo Select to downmix multichannel audio soundtracks to stereo output E Speaker Setup Page 7 i j gt 1 a a S e h Q oa le A gt a Maintenance and Service 40
51. turn to the main menu press the MENU button To exit the menu display press the EXIT button NOTE e Some menu items can only be activated when the right INPUT selection has been made ie the CHANNEL selection can only be accessed under DTV and ATV input selections e Operate the OSD menu according to the hints provided at the bottom of the screen DVD Operation Maintenance and Service 13 OSD Menu Operation y O 5 Recording Operation DVD Operation Maintenance and Service OSD Menu 1 PICTURE menu Picture display settings can be altered as desired The following options are adjustable Picture Picture Mode SS andard Picture Brightness Contrast Sharpness Saturation Hue Color Temp Standard Red Ee Aspect Ratio Screen Mode Advanced Settings Description Picture Mode There are four preset settings to choose from Standard Dynamic Personal and Mild Note Custom settings are saved into Personal Mode Brightness Adjust the overall brightness of the picture Contrast Adjust the difference between the brightest and darkest regions of the picture Sharpness Increase this setting to see Sharp edges in the picture decrease it for softer edges Saturation Adjust the saturation of the color based on your own like Hue Controls the tint NTSC mode only Color Temp Choose from Stand Cool Personal and Warm Red Controls the red colour of the picture
52. turned on Screen is too bright or too dark Screen is too large or too small Stripes appear on the screen and it shakes The screen does not move Screen appears but there is no sound Remote control does not work Picture is distorted USB not playing Action Is the power plugged in Insert the power plug Press the power button on the remote control Like your computer the TV has to run a number of diagnostic and software checks before it can display any broadcast channels The picture should appear in approximately 15 seconds Perform brightness adjustment or contrast adjustment Adjust the aspect settings Keep any appliances that emit magnetic radiation away from the TV Press the PAUSE button Check if the Pause button is pressed on external equipment 1 Check if the MUTE function has been activated 2 Increase the sound level by pressing volume adjustment button 3 Check if sound terminal of external input is connected properly 4 Check if audio cables are connected properly 5 Select and check the other input If the sound still does not work and the other channels are the same after you have done as the above contact your dealer or an autorized service center 1 Check if main power is On 2 Check that the batteries of the remote controller were loaded properly 3 Check to see if any obstacle exists between the LED TV and the remote control then remove it if any 4 If the batteries ha
53. ve no power replace them with two new batteries Compression of video contents may cause distortion especially on fast moving pictures such as sports and action movies Low signal level can cause picture distortion This is not a TV issue Have the antenna assessed Please check if the USB is connected properly Please make sure USB disk is compatible and the multimedia data formats are supported see Specifications page 45 0 o 8 T F co q Y fs o S Ss Q O S y S O ww y 0 9 e m N 3 S a Specifications Input Connector 40 1920x1080 AUDIO L R PC AUDIO HDMI RF Output Connector HEADPHONE o 3 The HDMI support 1 3 the HDCP support 1 1 100 240V 50 60Hz 79W lt 0 5W PAL BG DK I SECAM BG DK 48 25 863 25 MHz 2x8W 75 ohm NTFS FAT32 Maximum supported hard disk size 400G USB2 0 See the table on next page WUXGA Maximum supported resolution 1920X1080 60Hz 927x218x586mm 927x87x544mm 7 9kg 200x200mm M6X8 0 40 C e Specifications are subject to change without notice Weight and dimensions are approximate Specifications Supported Formats MOVIE The max bitrate is 6Mbps The max resolution is 720x576 pixels AVI Mono colour 16 colour 256 colour 16 bit 24 bit 32 bit The max PHOTO resolution is 3000x3000 pixels min resolution is 100x100 pixels MUSIC Sample rate 8K 48K Bitrate 32K 320K Special not

USER MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents