USER MANUAL - Direct Pool Supplies
Contents
1. triphibian AUTOMATIC SWIMMING POOL FLOOR CLEANER HJ1009 BUMBEL BEE USER MANUAL Please refer to Poolrite com 1 Congratulations on the recent purchase of your Triphibian Bumbel Bee robotic pool cleaner the generation of pool cleaners A Important Precautions In order to prevent damage to the cleaner never power on the unit when it is outside of the swimming pool The power cord must be connected to leakage protective device and appropriate earthed Socket Do not operate the cleaner when people are in the pool Do not try to move the floats along the electric cable Leave them always in the original positions Before power on make sure the cable is fully released to avoid any winding which could affect the cleaner s performance or cause damage The filter bags should be cleaned every time you use the unit This will prevent the dirty filter bags affecting the normal operation of the cleaner The cleaner should be stored in a cool and ventilated place away from direct sunlight when not in use The power supply unit should be placed in a shaded area In order to avoid overheating and the potential damage of components never cover the power supply unit Only authorized after sales service personnel should open the cleaner s motor assembly and power supply unit otherwise the warranty will be void In order to avoid any accident damage the power supply unit should be steadily placed at a minimum distance2. 19 VI Trouble Shooting up Stuck on main drain outlet of the aida Extended Extended operation Release cable Release cable manually 0 Power supply unit Place power supply in proper position so positioned apuaan cleaner can reach all area Nozzle in incorrect direction in incorrect direction Adjust nozzle to correct direction nozzle to correct direction Adjust the nozzle to lead to bigger movin Cleaner does not Customised pool shape s 9 reach all pool area eine Pool filter system and pump Turn off pool filter system operation Cable not long enough in Release additional cable pool Check the power cord is Plug in the power cord and cable line connected correctly Cleaner does not Damaged during Contact local vendor work transportation Cleaner does not match Contact local vendor local rated voltage 20 Vil Packing List Power supply unit HJ1009 In carton Vill Warranty Against Defects Product Details The Triphibian Bumbel Bee is manufactured to the highest possible standards using the most current technologies In the unlikely event that a problem occurs resulting from faulty manufacture or materials this product is covered under warranty Details of Company Providing Warranty Warranty for the Bumbel Bee is provided by Poolrite Equipment 415 Creek Road Mt Gravatt QLD 4122 Phone 07 3323 6555 Email info poolrite com au Obliga
3. of at least 3 5m from the pool edge Do not use the cleaner beyond the working environment conditions stated in this manual Do not uncover the protective film which is on the operating panel Turn off the filtering system of your pool when this cleaner is in use Note 1 Putting into or lifting out from pool with the cleaner bottom toward the wall to avoid any possible scratch to the pool surface 2 Please store the cleaner in a flat place the cleaner body should not touch any hard article to avoid possible damage 3 Do not press into or lift out the filter cartridge when installing or removing to avoid any damage to the chassis Do not lift both sides of the filter cartridge Do not push sides of the cartridge at the same time at the same time Contents si CCELI 3 ITA LL 3 a icm ua Mete APUD 3 IV Cleaner Structure end inco rmn end bo dE P 4 V Operation Instructions e nnn 5 VI Trouble x A PUGS P 16 Packing P 16 VIII P 17 Introduction The Bumbel Bee automatic swimmin
4. 1 7 3216 8112 F 61 7 3343 9600 E qld poolrite com au New South Wales 6 Forsyth Close Wetherill Park NSW 2164 P 61 2 9729 0166 F 4 61 2 9729 2759 E nsw poolrite com au Victoria 1 Endeavour Way Braeside Vic 3195 P 61 3 9558 1770 61 3 9558 1779 E vic poolrite com au Western Australia 2 32 Mumford PLace Balcatta WA 6021 P 61 8 9240 7748 61 8 9240 7797 E wa poolrite com au North Queensland 36 Hugh Ryan Drive Garbutt QLD 4814 P 61 7 4779 4880 F 61 7 4779 6714 E nqld poolrite com au
5. 3 Recommended nozzle direction 1 Direction at which cleaner moves faster Pool distance oketch map in 10M ES EI B 4M 6M 3M 10M LIN K 4M 6M 3M 10M 12 2 Direction at which cleaner moves slower Pool distance oketch map 4M 6M 8 10M pO 4m 6M 3M 10M 3 Pool with slope floor Pool distance Sketch map Select according to pool size 13 Select according to pool Size Note The above are recommended settings and operator can select a nozzle direction based on above principle and actual pool situation 5 4 Methods of putting the cleaner into pool Hold a position of the cable by one hand be sure that the cable from hand to cleaner will let the cleaner immerse into the water but above the floor hold the cleaner handle by the other hand to put the cleaner into water slowly Fig 5 8 Keep holding the cable to fill the cleaner with water and sink into pool floor Fig 5 9 Fig 5 10 By following the above methods this will help avoid the unit turning upside down 14 5 5 Cleaning the filter bag Release the retaining ring and open the cleaner P 2 Retaining ring Fig 5 11 Press the buckle to one side as well as lift the filter cartridge 9 es 1 va T wo l a OX 2 Ng gt Hy 2 x 7 S Y X 1 gt AY Fig 5 12 Take out the filter cartridge 15 Open the small buckle and
6. 5 0 15 30 45 60 75 90 Symbol of B Fig 5 6 Moving at fast speed Adjust the symbol of e 0 15 30 45 60 75 90 Position of symbol Fig 5 7 10 Operator can select the nozzle position for different pools for example choose slow speed which leads to large moving radius by putting the symbol points at 45 cleaner moves toward left or points at 75 cleaner moves toward right 5 3 1 3 Settings of nozzle In most cases put both of the nozzles at same direction will fit for any shape of pool A radius path and a direct path will happen by alternation if one nozzle is at 30 and the other is at 60 which will lead to full coverage of the pool and is helpful for the release of any possible cable twist 5 3 1 4 Setting of distance Choose a pool distance on the operating panel based on your pool size Suggest to select a longer distance if you put the nozzle at direction of low speed or there is slope in your pool for example the pool width is 6m then suggest to choose 8m or 10m if the cleaner moves in low program 5 3 1 5 Setting for pools with slope Put the nozzle at a position of fast speed so as to climb slope by enhancing water flow of the cleaner See scheme of moving at fast speed Note Full coverage is not guaranteed for some customised pool shapes while you can adjust the nozzle direction to reduce the moving curvature radius this may cause the cable to twist more often 11 5 3
7. asonable wear and tear e Faults confirmed after examination to be caused by any of the following o Incorrect water chemistry o Operation of the system subsequent to detection of a fault o Use of non genuine spare parts e Faults arising from abnormal use lack of care extreme exposure to the elements or harmful substances insect vermin infestation negligence and or Acts of God or any other factors beyond the control of Poolrite Equipment or its authorised Poolrite Professionals 22 Obligation of the Purchaser In the event of a product fault that is covered under the terms of this Warranty the purchaser must in the first instance contact the nearest authorised Poolrite Professional for assistance or Poolrite Equipment on 1300 855 894 or visit www poolrite com To claim warranty on goods that require return to Poolrite Equipment or an authorised Poolrite Professional the purchaser must return the goods freight paid Australian Consumer Law This Warranty is in addition to any requirement under the Australian Consumer Law PLEASE CONTACT YOUR LOCAL DELAER FOR ANY WARRANTY ISSUES Approval amp Compliance The Triphibian Bumbel Bee conforms to AS NZS 3190 2002 and AS NZS 3112 2004 and its Electrical Certification number is SAA080143EA 23 poolrite com Head Office 415Creek Rd Mt Gravatt QLD 4122 P 61 7 3323 6555 61 7 3323 E qld poolrite com au Queensland 4 429 Creek Rd Mt Gravatt QLD 4122 6
8. g pool floor cleaner is a new type of highly efficient swimming pool cleaning equipment Through its advanced computer controlled program it can clean the pool floor automatically without draining pool water At the same time it filters the pool water and gets rid of suspended particles and sediments For safe operation the cleaner works on 24V direct current Please read this instruction manual carefully before use ll Safety 1 Position requirement of power supply unit Refer to item 9 and 11 in Important Precautions 2 Requirement of power Refer to item 3 in Important Precautions Before connecting the cleaner to power please check that the local voltage and frequency hertz correspond to that of the power supply unit Ill Specifications Rated input voltage and frequency 220V 50Hz Output Voltage DC24V Rated input and output power 150W 120W Working cycle 1h 1 5h 2h 2 5h Cable length 13m Maximum cleaning area 150m Filtering capacity 15m h Filtering capability 150um Water temperature of use 10 C 35 C 2 ND 2 Io dee OU MM 0 Creeping speed 15 18m min 11 IP Grade Cleaner IP68 Power supply unit IPX4 12 Working temperature 10 C 40 C 13 Pool depth 2 5m 14 Climb slope up to 25 C IV Cleaner Structure Optional Fig 4 1 Assemble the cleaner according to above structure Note Optional part is used for pools with slope floor suggest to remove it for flat flo
9. or 7 V Operation Instruction 5 1 Cable connection 5 1 1 Plug the cable line into the socket on the power supply unit note make sure to plug it in the correct direction and position and fasten the nuts on both sides of the plug Match point Fig 5 1 5 1 2 Connect the plug with power Fig 5 2 5 2 Panel operation 9 4 Fig 5 3 Chart 5 1 Buttons amp indicator lights instructions 2 RUNTME Auto running time selection bution 0000000 3 stop Son To move the cleaner to certain 4 FWD REW Manual forward backward button location Cleaner starts running in 5 AUTO RUN Automatic working button automatic program Automatic working time indicator light 7 Poowiatnindicatoriom 5 3 Function and adjustment of nozzle There are two nozzles on the cleaner as shown in Fig 5 4 one of them opens while the other closes Water flows out through the opening nozzle to thrust the cleaner to move forward Operator can adjust the nozzle direction through rotating it by which to control the moving path of the cleaner 5 3 1 Setting of nozzle speed and moving path 5 3 1 1 In general there will be better cleaning effect under a slower moving speed There is less cable twists occur when cleaner moves in a larger radius and below instruction is helpful for a proper setting 5 3 1 2 Overlay of the cleaner s moving paths by different position of the nozzle Fig 5
10. take off the filter bag to wash and clean gt S IN Fig 5 14 Reinstall the filter cartridge Put on the filter bag Insert one side of the filter cartridge into the buckle N N N X W A Fig 5 15 Fig 5 16 16 5 6 Replacing filter bag Please use new filter bag in case broken as structure bellow 5 7 Helpful tips I Unplug power connection immediately after use Do not do it with wet hand or bear feet ii The cleaner should not touch pool walls while lifting out to avoid scratching the pool surface or any damage to the cleaner iii Before lifting out from pool and placing on the pool edge suspend the cleaner above water surface for 10 15 seconds to release the water left inside the cleaner body IV Hold the cleaner handle to lift it out from pool and never pull the cable 17 5 8 Installation of Cable Floaters The floaters packaged in the polybag are for preventing the cleaner flipping over on round edged pools The floaters should be locked on the cable up to 3pcs according to the pool 1 Plastic Floater Plastic Floater locked 2 Installation of Plastic Floaters Plastic Floater opened J a RT Pent Le ER TIE N CE area aso j Position limit of floater m Me X Es x bi N E quet A J as CO m x P Db 4 y ed 2401 1 09 28 18 Install floater up to 3pcs according to the round A edge shape Install the floater down to the Robot
11. tion of Poolrite Equipment Manufacturer Warranty Should examination by Poolrite Equipment confirm to its satisfaction that the Bumbel Bee product has failed due to faulty manufacture or materials Poolrite Equipment warrants the Bumbel Bee for the following periods from the date of original purchase 1 YEAR or 900 HOURS 21 This warranty is applicable to workmanship and or materials Poolrite Equipment or an authorised Poolrite Professional will repair or replace at no charge all parts which display faulty workmanship and or materials Poolrite Equipment does not accept any responsibility for loss damage or injury to persons or property arising from warranty related defects or installation of equipment Unless with the express prior written approval of Poolrite Equipment any repair or replacement shall be provided only by Poolrite Equipment or its authorised Poolrite Professionals This Warranty shall not extend to any expenditure otherwise incurred by the original purchaser Warranty Limitations This Warranty extends only to e he Bumbel Bee when o operated and maintained strictly in accordance with Poolrite Equipments instructions and o installed correctly in accordance with Poolrite Equipment s instructions detailed in the user manual and o found to be without product alterations or modifications of any nature whatsoever Warranty Exclusions This Warranty excludes e Faults confirmed after examination to be caused by re
Download Pdf Manuals
Related Search