User's Manual - Security Camera Shop
Contents
1. can execute the playback at any time Uniplayer Pro is included in the CD DVD and you can play them with other PCs with ease 6 5 3 Network e By using network from remote site the user can transfer the video and audio data from DVR HDD to user s PC for back up 6 6 Software Upgrade 1 Copy the F W file into USB memory stick and insert it into the USB port on the front of the DVR 2 Reboot the DVR and then the menu screen comes up as image A 1 3 Click OK button to upgrade Click CANCEL button to cancel 4 When upgrading the process rate is shown as image A 2 DVR UPGRADE 1 0 DVR UPGRADE 1 0 F W VER 3 1 1 2 RAMDISK UPGRADING 7 image A 1 image A 2 5 When message for upgrade completed is shown remove the USB memory stick and Click OK button 6 After rebooting upgrading completes 6 7 Client Program 6 7 1 RAMS PRO This program enables you to monitor the live image and search and play the data on the DVR by connecting the DVR through network remotely Clients can back up the data with this program S W can be upgraded with this program Active RAMS PRO and click the button and then the management page for the DVR lists Create a group in connect and enter NAME ADDRESS PORT ID PASSWORD of the DVR And click ADD button to save Default value is as follow PORT 7000 ID ADMIN PASSWORD 111111 6 7 2 Uniplayer PRO This program enables you to play back the data recorded on RAMS PRO and captur2. USB mouse controlling for easy DVR operation with front input location advantage 5 Rear Panel Functions 5 1 POWER INPUT This port is for powering on Free Voltage 100 240VAC 50hz 60hz 5 2 POWER SWITCH This is the switch for POWER ON OFF 5 3 Video Output MAIN This port is for VIDEO OUT and supports CVBS VIDEO OUT and 1EA is provided SPOT This port is for SPOT VIDEO OUT and supports CVBS VIDEO OUT and 3EA is provided 5 4 Video Input IN This port is for VIDEO INPUT and supports CVBS VIDEO input OUT This port is for LOOP OUT of VIDEO INPUT It can be used for VIDEO INPUT on other DVRs and channels 5 5 Alarm Output 4EA is provided When an event takes place contact output runs at certain time set and continues for some time set from setting values There are 2 ways of contact output which are NO and NC NO normal OPEN When alarm is activated NO port is connected to COM port while disconnected in normal condition NC normal CLOSED When alarm is activated NC port is disconnected to COM port while connected in normal condition 5 6 Audio In out 1 of each INPUT 16CH 1 16 8CH 1 8 and OUTPUT is supported through EXTENSION PORT 5 7 Alarm Input ALARM IN can be connected to 16 sensors 8 sensors for CH8 of 2 ways such as NO NC And it also can set the connecting system with mode choice and input channel on menu 5 8 HD It enables high resolution output of main image to be done t
3. this device which are not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Caution Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type Warranty will be made void if the product is disassembled or manipulated by the user 1 2 Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specif
4. time DVR turns into locking status Afterward any key touch will call up the password input dialog box Key lock will be released only when you input the correct password FRZ Freeze This is to pause the display screen on live mode Pressing this key button one more time lets you go back to previous mode PTZ Pan Tilt Zoom This key button allows you to enter Pan Tilt Zoom Focus mode Pressing this key button one more time lets you go back to previous live display mode ZOOM This is to be used to zoom in or zoom out the specific display area on live mode SEARCH This is to search the video data files that are recorded on HDD MULTI The user can utilize this key to set split channels from 1 to 8 1 to 16 When the key is pressed It shows 1 4 9 13 and 16 split channel display in sequential order And it happens on both live and playback modes SEQ SEQUENCE This is to see all channels in sequential order where the video input data is detected on live mode CAMERA_SEQUENCE setting value decides channels to be split and shown Split screen 1 4 9 13 mode let the screen split in sequential order By pressing SEQ button one time it is converted to PAGE SEQUENCE Pressing it again CAM SEQUENCE 4 5 Numeric button This button is to be used for inputting network IP address password on dialog box display and channel selection on live mode or playback mode 4 6 Direction selection button UP On menu status thi
5. Key Functions eeo eeeceeceeceee 2Qeoeeoeoeoeeeee 4 1 DVD RW This enables you to back up with ease 4 2 Button for Recording Playback RECORD This key button initiates the forced recording except the continuous recording mode Pressing this key button makes all live video channels start recording and pressing it one more time stops the recording R PLAY Reversed Play This is to initiate the reversed playback during forward playback On PTZ control mode this key button is to be used to lower the controlling speed PAUSE This key button freezes the playback mode until it s pressed again PLAY This is a playback start button and it initiates the playback of pre selected channel starting file and or audio when it s pressed during live mode On live mode PAUSE status this button resumes the playback In case of PTZ controlling mode it can be used to increase the controlling speed On still image viewing menu it is also being used for image back up EXIT This key button allows you to stop the playback while playing MENU MENU comes up for any functions on any channels on play back live mode 4 3 LED Display POWER Green light is on the system is on stand by mode REC Red light flickers on recording mode NET Green light flickers when the Network is connected 4 4 Function button LOCK This is to prevent any unwanted system manipulation by unauthorized personnel Pressing this key one
6. User s Manual Digital Hard Disk Recorder Table of Contents 1 Warning Safety Instruction cniin orense e e ee E p EE EE EE EE E E a EE AT 1 FIs Warning t2 35 etcetera hte Se a hg tan Ge a eee ee See A R aed 1 1 2 Safety Instructions eeni re E Sa ge iat ee ee A eee ie A a elie 2 Di SPSCUIC ALON acs sche Sse eg cs enh heed Se ah sep neg ea Sestak Seed hae Dee Gentes ee AL psd oe 2 By ACCESSOLIES ecgseicuss e i Soe COI ance ee eh ea aap ERE Dasa hae aN Teta EE E eh a ete ee NS a AS 4 4 Front Key Functions cccisncccvescesceesdevenseechsicnsbences dunce ssbeeouevech ingen bees RE TERE E E O EE 4 3 Rear Panel Functions nsa heh anhalt eet ieee ate hes whee ie aes 6 G2 Basic Operation miiir n oes oieee cases Hee E EA S pesca oh bale EE S E S E E E E 7 6I Power ON OFF a eee e roa E ara aE rE rae ae EEES EEE E EEE A E E E EE EE E eae eh ees 7 6 2 RECOrdiNg nonen re connoted ie o EEE EE o E E E e deeds o Ea EE EAE EE SS 8 6 3 Playback es lt i tess roec e ore Sha ests stele O deta cus ch E R ES A a E E N e e E he 8 0 4 Sear eee E E sue E E E A EE O EE a EE E E E E ES 8 Gs BaCki Ups EE EE E E E E 9 6 6 Softwate Upgrade ioiei o eia i a EE EE S EEEE EE EEE R ERE TORE A O EO ecuaet 9 6 7 Cli nt Progam ceir ae Pesca ach o e CE OEE na AAEE S veces Ooa chine seuss subse desea OEE EE A ER 9 Te Basic ID Password siooni a aoa a e E Ae E E EEEa EEO A ese doe ER TE SEESE 10 1 Warning Safety Instruction 1 1 Warning Warning Please follow
7. anguage Power Source perating Temperature Weight HD VGA CVBS 1EA SPOT 3EA H 264 1280x1024 50hz 60hz 1440x900 60hz 1920x 1080p 50hz 60hz 1920x10801 NTSC 1280x1024 50hz 60hz 1440x900 60hz 1920x 1080p 50hz 60hz 1920x 1080i PAL 720x480 720x240 360x240 NTSC 720x576 720x288 360x288 PAL 4 Levels Low Normal High Highest 240 fps NTSC 200 fps PAL 240 fps NTSC 200 fps PAL 240 fps NTSC 200 fps PAL 480 fps NTSC 400 fps PAL 480 fps NTSC 400 fps PAL 480 fps NTSC 400 fps PAL 1 2 3 4 5 6 7 5 10 15 30 NTSC 10 Steps 1 2 3 4 5 7 5 12 5 25 PAL 9 Steps Schedule Event Alarm Motion Video loss Detection Manual Calendar Event Alarm Motion Video loss Detection x1 x2 x4 x8 x16 Forward Backward 8 NO NC Selectable 16 NO NC Selectable 4 NO NC Relay In 8ch Out Ich 10 100 1000 Base T Static DHCP E mail DDNS 22x18 NTSC 22X18 PAL 22x18 NTSC 22x18 PAL 5 Level Sensitivity 1EA SMART Function Hard status RS 485 RS 232 Console Reserved Free Voltage 100 240VAC 50Hz 60Hz 60W 5T 40C 6Kg without HDD e Above specification features of the product are subject to change without prior notice 3 Accessories DVR e Power Cable e AUDIO IN OUT CONNECTOR IEA e DVR assembly and other screws e User s Manual e Remote Controller Option e Software CD RAMS PRO Uniplayer PRO FULL Manual 4 Front
8. ce you select the hour minute all channels on this time frame will start playing back Event Search By pressing Search button 4 different Search modes come up Select event menu and set event search condition to ON OFF and select LOG list and then the list of the events occurred appears Then select and play them Overlapped List By pressing Search button 4 different Search modes come up Select Overlapped List out of the 4 modes and the list of the overlapped data caused by changing the time appears Then select and play them 6 5 Back up 6 5 1 DVD RW By installing DVD RW DRIVER you can back up the video recorded for a certain period of time from HDD into CD ROM DVD ROM Select DVD RW as a TARGET and select backup time file channel and click WRITE and then DVR starts to back up Selecting ESTIMATE leads to calculating the capacity of the backup file 6 5 2 USB Memory Stick By connecting USB memory stick into USB port you can back up the data manually The user can back up the video data from HDD to USB device by using System setup gt Backup menu e After connecting USB memory stick into USB port select USB as a target and go through this step select backup time file channel and click WRITE and then DVR starts to back up Selecting ESTIMATE leads to calculating the capacity of the backup file e By keeping SimplePlayer program in USB memory stick where the backup video data is located the user
9. ed Backup data can be played back as well 6 7 3 Mobile viewer This program enables you to monitor live video and the status of DVR by using mobile devices like PDA or Smart Phone that support wireless internet connection i RAMS PRO This program enables you to monitor live video and the status of DVR by using i Phone a RAMS PRO This program enables you to monitor live video and the status of DVR by using Android phone 7 Basic ID Password You can register the users up as the following provided accounts for the DVR ADMIN1 ADMIN2 USERI USER6 You can register the users up as the following provided accounts for the CLIENT ADMIN1 ADMIN2 USER1 USER6 For the first time setup only ADMIN account has the following default password The other users accounts are to be activated only when you set up each user s password in advance ID ADMIN e Password 111111 10
10. hrough HD port Maximum 1920 1080P 5 9 VGA This port exports the same video output signal under VGA signal standard DSUB 15 Connector 5 10 RS 232 RS 232 SERIAL TYPE This enables you to control the external controller through RS 232 SERIAL 5 11 RS 485 RS 485 SERIAL TYPE This enables you to control the external controller through RS 485 SERIAL And it also enables you to control PTZ 5 12 E SATA E SATA connector is supported for EXTERNAL HDD extension 5 13 ETHERNET 10 100 1000 Mbps RJ 45 connector 6 Basic Operation 6 1 Power ON OFF 6 1 1 Power ON When power cable is connected and power switch on the back panel of the DVR is on the power LED light turns to red showing the DVR is on stand by mode and ready for power on The capacity of the HDD might change the boot time The boot time depends on the capacity of the HDD While booting a bar moves showing its progress When DVR booting process is completed OSD On Screen Display menu is displayed on screen At the same time you can hear the buzzer sound alerting that DVR booting process is completed Now the user can manipulate the DVR at his convenience 6 1 2 Power OFF When powering off the DVR system please press SHUT DOWN on system set up menu Then you will see the password input dialog box pop up for your password input Default 111111 to turn off the DVR system After entering your password the message about the completed shutting dow
11. ied by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus 16 The mains plug is used as the disconnect device The disconnect device shall remain readily operable DAD MABWNe 2 Specification Sch DVR Tecn DVR Image System NTSC PAL AUTO selectable Multi tasking Quadplex 6CH Composite 16CH Loop through BNC Video Channel 8CH Composite 8CH Loop through BNC Video Output Video Compression Display Resolution Recording Resolution Recording Quality Max Display Speed Max Recording Speed Max Playback Speed Time Laps Recording Interval fps Recording Mode Playback Search __ Playback Speed Sensor Input Alarm Output Relay Audio In Out Network Private Function _ Motion Detection ESATA PORT Hard Status PTZ Control Serial Port L
12. instruction to prevent any kind of damage or loss If you do not follow this instruction it might bring severe damage or loss The symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the unit The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons CAUTION seine DO NOT OPEN To prevent electric shocks and CAUTION TOC SHOCK DO NOT REMOVE risk of fire hazards do NOT e SERVICEABLE PARTS INSIDE use other than specified power VICING UALI FIED SERVICE PERSONNEL Source Warning This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at its own expense Caution Any changes or modifications in construction of
13. lected channel playback starting point and audio playback option 6 3 2 Audio Playback In case of running the recorded video data file with audio link included select the channel with the mouse and click RIGHT button and then the menu for audio appears And select AUDIO ON and click PLAY BACK Then audio plays back automatically When using the key on the front panel press OK button and select the channel and press OK button again then then the menu for audio appears After this the steps for play back is same as above 6 4 Search DVR provides 4 types of Search Modes 6 4 1 Search Mod Quick Search Enter YY YY MM DD Calendar Search For easy search of recorded data DVR provides the calendar search format Event Search This shows the recorded data list generated by ALARM MOTION VIDEO LOSS Overlapped List This shows the overlapped data caused by changing the time 6 4 2 Search Method Quick Search Press SEARCH button and then the 4 search modes come up Select TIME out of the 4 modes and enter YYYY MM DD and time Press OK button and the recorded data on all channels for the selected time play back at once Calendar Search By pressing Search button 4 different Search modes come up Out of these 4 modes please select Calendar search menu Calendar search selection calls up the Year Month Day window Once you select the Year Month Day then the hour minute window comes up On
14. n the system will be shown and switch off the power switch on the back panel of the DVR 6 1 3 Date Time Setup This is to input the date time of DVR system After changing the date time of DVR you must press OK key button on date time menu to activate the date time application 6 1 4 Password This is to change the user s ID and password for the DVR system 6 1 5 Network Setup Select the appropriate network type from the network setup menu Select the network type among STATIC DHCP DDNS 6 2 Recording 6 2 1 Recording Menu Setup Details are to be selected from Recording Setup menu Firstly select the resolution Selectable resolutions are 3 different choices i e NTSC 720x480 D1 720x240 Half D1 360x240 CIF and PAL 720x576 D1 720x288 Half D1 360x288 CIF Then audio recording selection and recording quality per channel is to be set Recording qualities are 4 optional choices i e NORMAL LOW HIGH HIGHEST In this category the user can make the choice per individual channel or per all channel at his own convenience And finally recording condition is selectable See Full manual 3 2 Recording set up menu for the details 6 2 2Recording Condition Setup You can set values for REC1 REC2 REC3 See Full manual 3 2 Recording set up menu for the details 6 3 Playback 6 3 1 Direct Playback by using PLAY button When pressing PLAY button DVR starts the playback according to the playback setting condition of se
15. s key button can be used to select the detailed item by moving the cursor upward On PTZ controlling status this key button can be used to move the camera upward On playback mode this key allows you to switch the channel DOWN On menu status this key button can be used to select the detailed item by moving the cursor downward On PTZ controlling status this key button can be used to move the camera downward On playback mode this key allows you to switch the channel LEFT On menu status this key button can be used to change the setting value On PTZ controlling status this key button can be used to move the camera left direction On playback mode this key allows you to lower the playback speed RIGHT On menu status this key button can be used to change the setting value On PTZ controlling status this key button can be used to move the camera right direction On playback mode this key allows you to increase the playback speed OK On menu status this key is used to confirm and execute the selected function 4 7 IR Reception This is to accept the IR data from the remote controller 4 8 Jog Shuttle Jog This is to see the image recorded carefully in the forward reverse direction Shuttle The user can run speedy playback by using jog shuttle in the forward reverse direction 4 9 Front USB port This USB port is to be used to back up the video data or captured still image from HDD Also this USB port supports
Download Pdf Manuals
Related Search