Home

User Manual of Personal Tracker SPT10G DIY Model

1. 3 457 or 0418123 457 Note If you are not programming any telephone number in Phone_Number2 Fill in C to clear the existing Phone_Number2 Phone_Number3 Maximum length is 16 characters including the character if needed Example 61 418123 458 or 0418123 458 Note If you are not programming any telephone number in Phone_Number2 Fill in C to clear the existing Phone_Number2 Low _Battery_Setting This parameter is to enable the Low Battery Level Report to send an SMS to your phone 0 Disabled means no SMS report will be sent to the pre set Phone_Number1 1 Enabled means a Low Batt report will be sent to the pre set Phone_Number1 via SMS Time_Zone_Setting Set up the local time for MyKidsGPS The format is HHMM The original setting in MyKidsGPS is the GMT time England time Example 1000 set up the local time for Melbourne Sydney Brisbane 0930 set up the local time for Adelaide 0800 set up the local time for Perth Device_Name You can use this parameter to assign a preferred name for MyKidsGPS and it will appear on each SMS report The maximum length is 10 characters which can be a mix of numbers and the English alphabet Example Mum s GPS If the SMS message setting is successful the sender will receive an SMS confirmation on their mobile phone from MyKidsGPS as below SOK CFG New_Password Phone_Number1 Phone_Number2 Phone_Number3 Low_Battery_Sett ing Time_Zone_Set
2. MyKidsGPS Tracking System User Manual 1 How It Works MyKidsGPS is a GPS GSM tracking device which reports real time geographic information by sending an SMS to your mobile phone GPS PWR GSM LED Mini USB Connector Power Switch SOS Button By making a phone call from a 3G phone the MyKidsGPS will answer then immediately will hang up and send back GPS location information as well as a Google Map link via an SMS text message EA szoooocasc Step 2 Step 3 Receive SMS Click on SMS Link To View Map For Privacy the MyKidsGPS will only accept calls from pre programmed numbers Your phone must have Caller ID switched on otherwise the MyKidsGPS will not respond see Section 4 on programming By clicking on the Google Map link your 3G phone will open Google Maps on the screen to display the location of the device 2 Functionality of MyKidsGPS MyKidsGPS provides the following functions Real Time Location report via SMS by an authorized mobile phone call Emergency SOS Alert to a maximum of three authorized phone numbers via SMS Movement report to a maximum of three authorized phone numbers via SMS Low Battery Level report to a pre set phone number 3 How to set up and program MyKidsGPS 1 Unscrew the rear battery cover of the IPT123 remove the battery and insert a prepaid sim card without sim pin lock Then re insert the battery and replace the cover and screw 2 Turn onthe M
3. re OFF when in this mode The MykKidsGPS starts to detect the any movement 180 seconds after this mode is enabled No action will be taken within the 180 seconds even if movement is detected This delay of 180 seconds is designed to prevent any false alarms If movement is detected by the MyKidsGPS the 3 LEDs on the MyKidsGPS will blink simultaneously 1 second ON and 1 second OFF 30 times for a total of 60 seconds After 60 seconds the MyKidsGPS will send out an SMS Alert To Disarm the movement alert quickly press the SOS button 3 times within 2 seconds The Moving Report SMS is as follows Example Moving Mums GPS 2010 04 16 13 11 22 Lat 37 68506 Lon 145 07221 Spd 0Km h Sat 8 http maps google com maps q 37 68506 145 07221 8 How to enable the Low Battery Level report for MyKidsGPS 1 Set the Low_Battery_Setting to 1 in the SMS configuration message 2 Only Phone_Number1 will receive the Low Batt report if the Low Battery Level event occurs 3 The Low Batt report sample is as follows Example Low Batt Mums GPS 2010 04 16 13 11 22 Lat 37 68506 Lon 145 07221 Spd 0Km h Sat 8 http maps google com maps q 37 68506 145 07221 9 The Automatic Power Saving Function MyKidsGPS will go to Power Saving mode when there is no movement detected for 5 minutes in order to save power and extend operation time The Automatic Power Saving function is enabled when MyKidsGPS configura
4. receive the following SMS from MyKidsGPS SOK CFG 0000 0418123456 1 1000 Mums GPS 5 How Track The MyKidsGPS 1 2 3 4 Make a phone call from your mobile phone to MyKidsGPS MyKidsGPS will hang up the phone call automatically after one ring tone MyKidsGPS will send an SMS message back to the caller s 3G phone with the following message Example Location Mums GPS 2010 04 16 13 11 22 Lat 37 68506 Lon 145 07221 Spd 0Km h Sat 8 http maps google com maps q 37 68506 145 07221 Enable the web link Google Map link as above to show the location map on the 3G phone Industrial Dr Industrial Dr Industrial D Industrial Dr 6 How to enable the Emergency SOS SMS for MyKidsGPS 1 2 3 Press and hold the IPT123 SOS button for 3 seconds The 3 LEDs of MyKidsGPS will blink simultaneously for 5 seconds which indicates that the Emergency SMS message is being sent to the pre set phone number s The 3G phone s with the authorized phone number s will receive the Emergency report via SMS Example Emergency Mums GPS 2010 04 16 13 11 22 Lat 37 68506 Lon 145 07221 Spd 0Km h Sat 8 http maps google com maps q 37 68506 145 07221 7 How to enable the Movement report on the MyKidsGPS 1 2 Quickly press the SOS button 3 times within 2 seconds The power LED on the MykKidsGPS will blink twice every 5 seconds and keep blinking in this manner In the meantime the GPS and GSM LEDs a
5. ting Device_Name Example 1 SMS set up message 0000 CFG 1234 0418123456 0418123457 0418123458 1 1000 Mums GPS SMS confirmation message SOK CFG 1234 0418123456 0418123457 0418123458 1 1000 Mums GPS Note If there is only one phone number to be set in MyKidsGPS a sample SMS message would be 0000 CFG 1234 0418123456 1 1000 Mums GPS If there is only two phone numbers to be set in MyKidsGPS a sample SMS message would be 0000 CFG 1234 0418123456 0418123457 1 1000 Mums GPS If any parameter or format is incorrect MyKidsGPS will return the error message with all of the original settings as the following format SERR CFG New_Password Phone_Number1 Phone_Number2 Phone_Number3 Low_Battery_Set ting Time_Zone_Setting Device_Name Note If the SMS set up message contains an incorrect password MyKidsGPS will ignore this SMS set up message and not respond with any error message back to the sender 4 How to query the setting of MyKidsGPS The current settings in MyKidsGPS can be queried by sending the following SMS message to the MyKidsGPS Current_Password CFG The MyKidsGPS will respond with the following SMS message back to the sender 1 2 3 SOK CFG New_Password Phone_Number1 Phone_Number2 Phone_Number3 Low_Battery_Setting Time_Zone_Setting Device_Name Example If the original setting is 0000 0418123456 1 1000 Mums GPS And a query is sent via SMS to MyKidsGPS 0000 CFG Sender will
6. tion setting is completed In the Power Saving mode the last location information will be stored in the unit Any phone call or movement will wake MyKidsGPS up immediately and restore its normal operation 10 The LED Indication Status GPS LED 1 Quick blinking 2 blinks every 1 second No GPS Signal Take the device outdoors 2 Slow blinking 1 blink every 3 seconds GPS OK 3 OFF Power off or in Moving Detection mode or in Power Saving mode PWR LED e Quick blinking 2 blinks every 1 second System is initializing or system error has occurred e Slow single blinking 1 1 blink every 2 seconds MyKidsGPS is charging e Slow single blinking 2 1 blink every 3 seconds System is ready e Very slow single blinking 1 blink every 6 seconds In Power Saving mode e Slow double blinking 2 blinks every 5 seconds Moving Detection mode is enabled e OFF Power off e Solid ON MyKidsGPS is fully charged GSM LED 1 Quick blinking 2 blinks every 1 second Searching for GSM Mobile Phone network 2 Slow blinking 1 blink every 3 seconds GSM is ready and connected to the network 3 OFF Power Off or in Moving Detection mode or in Power Saving mode
7. yKidsGPS via the small on off switch on the side of the device 3 The MyKidsGPS is programmed by sending an SMS message from your mobile phone to the MyKidsGPS The SMS message format for the set up is as follows make sure there are no spaces in the SMS Current_Password CFG New_Password Phone_Number1 Phone_Number2 Phone_Number3 Low_Battery_Setting Time_ Zone Setting Device_Name Parameter definition Current_Password The password is setto 0000 from factory If this password is incorrect then MyKidsGPS will not accept the settings and no error message will be returned to the sender s phone number via an SMS If you change your password from 0000 please remember it otherwise you will need to return the device to Intellitrac for resetting CFG This parameter is programming the MyKidsGPS to enable the tracking reporting function it can not be changed New_Password Numeric characters only Minimum length is 4 digits and maximum is 10 digits Please do not forget your password Phone_Number1 The MyKidsGPS will accept incoming calls from this number Maximum length is 16 characters including the character if needed Example 61 418123456 or 0418123 456 Note Phone_Number1 is necessary in the SMS message to enable the use of the MyKidsGPS Phone_Number2 The MyKidsGPS will also accept incoming calls from this number Maximum length is 16 characters including the character if needed Example 61 418 12

User Manual of Personal Tracker SPT10G DIY Model

Contents

Download Pdf Manuals

Related Search

Related Contents