User Manual - Assa Abloy
Contents
1. 6 Unlocking the door from the inside Down the lever while pressing the Safe handle button Down the lever while pressing the Safe handle button sN 0 MOH 7 Enabling disabling Safe handle GATEMAN YDM3109 protects from any break in attempts through the Safe handle button Factory default Enabled status Enabled status Disabling Safe handle Enabling Safe handle A Caution Safe handle button Take out the hexagon wrench which is docked in the battery cover The hexagon wrench Take out the hexagon wrench which is docked in the battery cover The hexagon wrench AR Disabled status button Turn the fixing bolt on the side of the inner lever to the right while pressing the Safe handle button Turn the fixing bolt on 3 the side of the inner lever to the left until the Safe handle button pops out Be careful not losing the fixing bolt when you loosen it to set the feature on 18 Egressing when the Safe handle egress button is on O 6 Down the lever while pressing the i Example Safe handle egress button vL vo A Caution The locking bolt would not be retracted in case of not pressing the button When the fire detection sensor is on the feature is still on so the user must follow the usual procedure to open the door sN 0 MOH 8 Automat2. Remote control You can use a remote control by installing the applicable Remote control module This option may not be available depending on your country or local dealer Smart Pad Keypad displays functional operation with lighting Basic Operation Please do remember below operation 1 Card Key Registration 4 Unlocking the door from the outside 7 Volume control Contact Card key a E k AG gt Press T button Contact all the keys Press Q button Wake up the lock with the palm touch enter the R p you wish to register security code and retouch the lock with the palm Mute Volume Button m Jq on one by one E l ale if Normal Volume Button E 4 1 2 Security Code Loud Volume Button Caa 2 Security Code Registration Oo 1 2 3 ince d 7 Automatic Manual Lock Mode 8 Turning off the alarm Automatic Lock Mode Press button Enter the security code Press button Press rl Button zG Contact the card key on card key reader or 6 12digits A 2 a z Manual Lock Mode Enter the security code or 3 Locking the door from the outside Press yj Button The automatic Lock Sensor detects the door Forced Locking Press and hold button for 5 seconds closing and locks the door within 5 seconds or i Forced Lock Mode from inside Touch the keypad with palm for locking the 9 Emergency
3. E Battery life stand alone This product uses 4 1 5V p alkaline AA batteries which can be used approximately 10 months on the condition of 10 times open close cycles per day E Battery replacement O warning Replace all 4 batteries when the low battery warning melody rings and the LED turns red Use authentic alkaline batteries The LED turn red Caution Always check and directions when inserting batteries 1 5V AA size alkaline battery 1 1 actual size When a low battery warning melody rings Use the authentic alkaline batteries It is a user s responsibility for damage caused by using unauthentic batteries Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions 2 Battery life may vary due to temperature moisture frequency of use and the quality of the batteries used batteries L Do not mix new and sN 0 MOH 25 26 14 Displaying operation status Smart Pad Battery Replacement warning W Z Battery Icon lights on Dead Bolt locking motion warning ral Locking Icon lights on Wrong try Lock out warning 7A M77 If incorrect security codes or unregistered card keys are attempted 5 times in a row it will lock out for about 3 minutes with the blinking LED 3 TY 2 12 1 minute 1 minute passed passed Wrong try Lo
4. door with your card key e The numbers of registered cards are shown on the keypad Touch the keypad with the palm Contact card key Registration button the card will not be registered 2 Registering Security Code A Caution Keep the door open while you register the security code to prevent yourself from accidentally getting locked out E Note 6 digits 12 digits Set a code of 6 12 digits using the number buttons 000000 000000000000 The old code is automatically deleted when registering a new code O 2 4 Press i Enter your security i Press if Check your security Registration button code Registration button code 20 Ena Once registration is completed make it sure to open the lock with your new security code Open Battery Cover and Enter the code you wish The registration is Press Registration to register 6 12 digits completed with a pi bi button bing sound A If it takes too long over 7 seconds to enter the code after pressing A lt gt and lt gt buttons can not be used When registering the Opening the door with your security code it shows Touch with the palm keypad Enter security code gt Touch with the palm keypad what the user has just for security codes registered in order register security code button the code will not be registered sN 0 MOH 3 L
5. power supply door in M Manual Lock Mode UNLOCK gt UNLOCK 9V Battery can be G used to supply 5 3 Forced Lock Mode from outside electricity to the unit He D Manual Lock Mode Press M Button With the Contact Contact palm 5 seconds 3 seconds after put security code CONTENTS Specifications aaa 08 Identification of Product 09 How to use 1 Registering Card Keys o o ccccscssccuesssens 1 2 Registering Security Code 0 0 B 3 Locking the door from the outside 14 4 Unlocking the door from the outside 15 5 Locking the door from the inside 17 6 Unlocking the door from the inside 17 7 Enabling disabling Safe handle 18 8 Automatic Manual Lock Mode 20 9 Forced Lock Mode 21 10 Break in Damage alarm ooo 22 11 Wrong try Lock out oe 23 12 Volume control 24 13 Battery use amp Replacement 25 14 Displaying operation status Smart Pad 26 Option 1 Remote control module 2 Remote control Cautions 1 Emergency power supply 00 0 0 2 Lost card key n 3 Product malfunction a 4 Emergency mechanical key override Chinese Manual x HP 27 28 30 31 31 32 Specifications Parts Specifications Remarks Front Front Body 68 6 W x 306 6 H x 27 D 70 6 mm Zinc die casting Operating temperature 15 55 C 5 131 F Back
6. time you use it so that there is no risk of hacking It is non directional and the operational range is up to 10 20m Caution The operational range may vary depending on the installation environment Re registration automatically deletes the previous registered remote control Registering remote control O 2 4 O Press Registration Press Press O 15 if Butonilocatodionithic Press i Check remote Registration button buttons WEL MOLT Registration button control operation control with a pin Co ZO Cie You can register up to 5 remote controls consecutively In order to i register consecutively press Registration button W on eaeh remote control a with 10 second intervals Press open or y 5 Remote control makes a close button to 93 beep when it is properly check the registered operation 28 Deleting remote control registration O 2 O Press I Press 7 5 l Press I l Deleting remote control Registration button buttons Registration button registration Remote control registration C apy LLG 40O Ean i 42 gt 38 4 5 6 gt 8 9 8 is cancelled with a di ri ri ASN ring sound How to use the remote control Locking the door D Unlocking the door Changing the batteries Press close button and the door Press open button and the door Open up
7. Educate your Handle the unit with care Excessive force careless handling may cause product damage Do not use an inappropriate tool that can cause damage or malfunc tion of the product children about the proper use of the product whenever you leave your house especially in the manual lock mode Make sure the door is securely locked Make sure the distance l between the doorand Be careful not to have an unauthorized user know your security code Change your code periodically door frame is not widened more than 5mm 5mm Do not use water and any type of solvent such as gasoline or benzene as they can cause damage to electronic circuit deterioration and or paint peel off part clean and dry Dust off dirt smoothly with a soft cloth 177 Dry cloth Keep card key reader Do not have your card key lost or stolen E Immediate re registration of all remaining keys is required to invalidate the lost key e HO Remove all of the batteries before installing or removing a remote control module Overview m Proximity card identification You can use your ISO 14443 A type RFID card such as credit card or pass card as your card key Triple access You can unlock the door by the card the secur
8. Main Body 72 8 W x 306 6 H x 37 0 D 80 8 Flame Retardant ABS Zinc D C Lever Zinc die casting Card Keys 4EA Up to 40 keys sold separately Battery 4EA 1 5V AA alkaline batteries Operating voltage 4 5 6 V Last up to 10 months 10 times used a day Lock case Steel and SUS304 Option Remote Control Wireless Optional Battery life may vary depending on temperature moisture levels frequency of use and the quality of the batteries Please make sure that all parts are included when purchasing the product X Optional products may not be available depending on your country or local dealer E Basic Contents H Option 4 Card keys Emergency keys Screws Installation Template 4 Batteries Users Manual ag Front Front Body Back Main Body Lock case Remote control Remote control module 08 Identification of Product 1 Front Front Body install on the outside of the door Card Key Reader Dead Bolt Jam Lamp Lock case Battery Change Lamp x Pull down Emergency Cover Latch Bolt Lever Jonpoid JO UONe IYNUEP Automatic Locking Sensor Emergency Power Supply Terminal 9V Emergency battery Optional Dead Bolt Emergency Cover 09 Keypad 10 Key CC 10 1 5V AA Alkaline Batteries 4EA Slot for Remote control Battery Cover module Option Auto Manual Lock butt
9. YDM 3109 Yale Digital door locks User Manual Keep this manual safe for future reference GATEMAN X The functions and design of this product can be changed without notice for quality improvement Xx Chinese manual is from 33 page HXH ABM An ASSA ABLOY Group brand ASSA ABLOY Ver PMU 0904 01 02 Please read the following before using your Yale GATEMAN product This product is designed and manufactured to assure personal safety Improper use can result in personal damage or property loss Please observe the procedures for installation use and servicing Yale GATEMAN is a precision electronic device All safety and operating instructions should be read before the product is operated Refer all servicing to qualified service personnel Servicing is required when the product is damaged or to be re installed Check your installation conditions with the local service provider before installation as your door prep might be different from the standard this lock conforms with The products warranty does not cover defects or damages arising from the door defects improper installation lack of or improper maintenance improper storage shipping and handling ordinary wear and tear misuse abuse accident unauthorized service or use with unauthorized service parts Disassembly rework and reverse engineering are prohibited without a written approval of Yale except for a normal installation of the product The trade
10. ck out warning starts 3 3 minutes 2 2 minutes remaining remaining 1 minute remaining External Internal forced locking Starting from the left column the LED comes on from left to right to left for twice Break in Damage warning The LED keeps coming on to the clockwise when a break in or damage is happened Alarm lasts for 30 minutes Security Code registration When registering the security code it shows what the user has just registered in order Right In case of registering 1 2 3 4 5 and 6 Card Key registration When registering the card keys Keypad displays the number of registered card keys Right 3 is on 3 keys have been registered aly AA Option 1 Remote control module Remote control module should be installed in advance to use remote control Open battery cover and insert the module into the slot Proper functioning of the module can be checked by operating a remote control Installing remote control module Q 2 Remote control module Required for the use of remote control O Put batteries back Confirming i Open battery Insert remote control cover and remove i module into the slot i in Check all batteries directions uondo 27 2 Remote control The remote control is an FSK Frequency Shift Keying type that uses a Floating ID encoding system which changes the wireless code each
11. e right PIN code by the the palm fake PIN Fake PIN code Right PIN code code or Right PIN code Fake PIN code Caution Please slightly A touch the exterior e This feature is not working when the lock is keypad locked down due to wrong try lock out delay A Caution Touch the O Confirming keypad with the l palm or press button 1 4 ogo vom 7 Pihi 7 The lock is unlocked with melody Pi bi bing Please slightly touch the exterior keypad or press button to finish e When any incorrect PIN codes are inputted five times in a row it turns the lock down for three minutes e When this function is on the user cannot use the fake PIN code function until any normal verification through key card fingerprint PIN code or opening the lock from inside is made So the user is encouraged to use the right PIN code without any fake number to verify the lock iy Note Use the fake PIN code feature whenever there is any chance of exposing the right PIN code to others 5 Locking the door from the inside When set on automatic lock mode the automatic lock sensor detects z the door closing and locks the door Automatic automatically within 5 seconds lock mode D Within 5 seconds Dyin 7 Use manual thumb turn on the back body Manual lock mode
12. ed or anybody C IF SX breaks in by force while the door is locked Hla Turning off the alarm Choose one of the four options below Press and hold Press Unlock Registration button button on the remote for 5 seconds control Enter your security Contact your card key code 1 2 3 or 1 3 o ze A o A N N 22 11 Wrong try Lock out No keypad function is available during this wrong try lock out delay The break in and damage alarm work regardless of this function Lock out 3 minutes e If incorrect security codes or unregistered card keys are attempted 5 times in a row it will lock out for about 3 minutes with the ra blinking LED bd gt 35251 5 times The lighting digit on the keypad is showing remaining time e The system will resume the operation Resuming automatically after 3 minutes of lock out If you press Registration button on the back body or down the lever while pressing the Safe handle egress button it resumes the operation it asp 0 MOH 12 Volume control This function can control the operating sounds so that the door can be opened and closed without disturbing others silent Mode E Setting the volume Button on 0 K iy Oo _ 1 2 Normal Mode d Setting the volume Button on 1 Loud Mode o1 2 Setting the volume Button on 2 q lt A 13 Battery use amp Replacement
13. ic Manual Lock Mode Automatic locking sensor which detects the door closing and automatically locks the door in 5 seconds Automatic lock mode is a factory default setting Setting it on Push up the Button F Eis gt automatic lock 4 Tht Mode mode Manual Mode Automatic Mode Setting it on Push down the Button 4 Es gt O manual lock on 47 Mode mode Automatic Mode Manual Mode 20 9 Forced Lock Mode External forced lock mode v Q 2 Setting Contact card key if Confirming external forced Lock external forced lock Contact the card key on s External forced lock card key reader for 5 seconds until you hear 3 beeps mode is set on with mode on with Garces Ay Di ri ric sound the card key 1 4 hi 5 seconds pik Zpix pix O 2 O Setting Touch the keypad if Enter the i Ve a L ternal with the palm security code hear 3 beeps forced lock 1208 ey mode on with 4 ae the security T a code i Internal forced lock mode When internal forced lock mode is on the keypad is not functioning A warning beep sound will go off if anyone attempts to verify by the security code or the card from outside sN 0 MOH Confirming external forced Lock External forced lock mode is completed with Di ri ric sound Date UNLOCK LOCK Turn the mode TT 21 10 Break in Damage alarm 80dB alarm goes off when the lock is damag
14. ity code or the mechanical key at your convenience You do not need to worry about accidental lockouts by losing or forgetting the key Easy re registration of keys If you lose a key you can invalidate the lost key by re registering all other keys You can register up to 40 card keys to add users m Anti collision Contacting multiple cards does not cause error to the lock The card key reader will recognize the card key among a pack of cards Easy and simple operation One touch operation allows every user including children and senior the simplest use m Automatic locking Just closing the door will automatically lock the door Manual operation is also available Break in Damage alarm 80dB alarm will go off if anyone attempts to damage the lock or forces the door open Safe handle Protects from any break in attempts through the safe handle m Verification with the palm The security code is verified by palm touching to randomize any fingerprint residues on the keypad so protect from exposing it Emergency power supply When the batteries are completely discharged you can easily supply emergency power to the lock with the 9V battery Volume control You can change the volume The break in alarm still operates even if the silent mode is on Forced lock mode Internal forced lock prevents anyone to unlock from the outside and external forced lock makes only manual thumbturn available to open the lock from the inside
15. marks trade names designs copyright patents and other proprietary right used on or embodied in the product and this manual shall remain the exclusive property of the manufacturer cannot be copied or used in any form without the written authorization by Yale Visit our website www yalelock com for more information on the products The information in this manual is subject to change without notice inconvenience Children should be well educated for the operating instruction Keep this INSTRUCTIONS manual in a convenient place so that you can refer to it when necessary IMPORTANT SAFETY Please read the following safety instructions to prevent any accident property damage and A Caution must be followed to protect yourself and your property Y Note explains product functions and features SO prohibited amp must observe Yale GATEMAN digital Clean only with dry Do not attempt to When you move door lock is a precision cloth Do not use water S disassemble the unit contact your local electronic device that can cause damage by yourself That can Nate Service personnel to the electronic circuit cause an electronic for re installation shock and product Check the service damage charge with your service provider A Caution
16. ocking the door from the outside X Please check Automatic Manual Lock Mode Automatic lock mode Manual lock mode A Caution The automatic lock sensor detects the door closing and locks the door automatically within 5 seconds The door locks when touch the keypad with the palm gt Within 5 seconds As the automatic lock function does not work in manual lock mode make sure to check that the door is securely locked when leaving the premises 14 4 Unlocking the door from the outside O 2 Unlocking Contact card key L Confirming the door open the door with card A key 7 y Security Touch the keypad Enter your Touch the keypad Confirming the I with the palm again code with the palm security code or press button door open Normal or N BR A ogo n Confirming the lock unlocked with a pi bi bing sound f d my The keypad cannot be operable in case of wearing the glove e Using the palm or pressing button do the same function after entering the security code Note If the card key does not work properly please contact the card key after touching the keypad with the palm 93Sf 0 MOH Opening the lock by the fake PIN code e This explains how to open the lock with the fake PIN code Q 2 Opening Touch the Press any number fake PIN the lock keypad with 9 code and th
17. oes not work call for after sales service Reset Button suoine gt 31
18. on Registration button Volume Control Switch Lever Safe handle button Manual thumb turn Internal Forced Lock Switch 3 How to Use 1 Registering Card Keys A Caution Keep the door open while you register card key to prevent yourself from accidentally getting locked out g5 2 ly z Note P Contact your local dealer for additional card keys 4 card keys are provided at purchase and you can register up to 40 card keys Additional maximum Basic 4 keys BG 40 ISO 14443 A type RFID card can be registered as your card key If you lose your current card key re register all the remaining keys to invalidate the lost key A All card keys should be registered at a time 11 O 2 4 Press i Contact all the card keys i Press i Check the key ou wish to register on the Registration button card key eadar one by one Registration button operation 40 Eie FO Eie Pik 7 Open Battery Cover and If you hear a pik sound the The registration is Opening the door with Press Registration card keys are registered completed with a pi bi your card key Contact button If you hear a ti to ti to sound bing sound your card key to card the card key had been already key reader registered A If it takes too long over 7 seconds to contact a card key after pressing Opening the
19. the battery cover at the back of the will lock within 2 3 seconds will unlock within 2 3 seconds remote control and change the batteries uondo 29 30 Cautions 1 Emergency power supply In case the batteries are completely discharged 9V battery can be used to supply electricity to the unit Unlock with the card key or security code while contacting a 9V battery just like the below instruction Discharged batteries should be replaced right away O 2 4 O Discharged Holding a 9V Security code use Change Confirming battery ll Batteries if A bee EE z RN gt a Open the E i a door Touch the keypad with the palm Enter the security code and retouch the keypad or press button Check out if a card key and security code work properly after replacing all batteries Replace all of the batteries 2 Lost card key If you lose your card rest of card keys must be re registered to invalidate missing one x Lost card key Re registering card key Caution Enter the security code in case you lose the card key or you are not carrying it X It is a user s liability to break the lock because the user did not register any security code 3 Product malfunction Press reset button located in the left of emergency power terminal with a pin and try again with the key or the security code If it still d
Download Pdf Manuals
Related Search