MNTZ36PP Parapet Mount Bracket User's Manual
Contents
1. HEX BOLT 16x20 SUS 8 ANCHOR 1 4 SUS g SCREW PH M4x8 SUS i M RUBBER GASKET SILICON Ll SEAL TAPE 12mm LF PH MS M3x10 SUS a a MNTZ36PP Parapet Mount Bracket ATTENTION Make sure the o rings are attached to the mounting screws and dome cover torx screws to prevent water ingress Installing the camera into the camera adapter Connect the cables inside the camera adapter Loosen the dome cover torx screws 3ea and remove the dome cover from the camera base 3 Mount the camera base to the 1 holes in the camera adapter using the M4x12 screws 4ea supplied with the camera with o rings attached Attach the dome cover to the camera base using the dome cover torx screws Sea with o rings attached Camera Adapter Hole 1 4EA Camera Base O Rings 4EA M4x12 Screws 4EA N Dome Cover O Rings 3EA N D Torx Screws 3EA 42. MNTZ36PP Parapet Mount Bracket a Compatible with Digimerge Camera Models DPZ36W023 DPZ36W030 o Usage Cautions and Warnings Product Characteristics This product has been designed to be used in the installation of speed dome cameras This product has been Please read through the User Manual and all safety instructions prior to use fabricated using strong corrosion free aluminum alloy material e All the safety and operating instructions should be read before installing Follow all operating instructions Installation must be performed by a trained professional Prior To Installation Do not use the product with cameras other than the recommended models Avoid installing the mounting onto an unstable structure such as a gypsum wall panel Install the mounting onto a strong structure The mounting has to be installed onto a firm and stable location that can such as a concrete wall steel beam etc Use concrete screws with plugs or other installation tools when installing the mount onto support the weight of the camera and mount Ensure all parts are completely secured a concrete structure Make sure that all the screw parts are metallic Do not use the product for other purposes Avoid screwing too close to the edge of a piece of wood when screwing into a wooden structure Installation Drill a hole in the surface for the cables and run the cables through the cable hole PIRE GONER Drill 8 anchor holes in the surface according to t
3. he hole PH MS M310 SUS a VD pattern in the parapet plate 3 Insert the anchors 8ea Run the cable through the PIPE SOCKET parapet plate and use the 14 hex bolts 8ea to fasten the parapet plate to the surface Feed the cable through the pipe and set the pipe on the parapet plate using the 16x20 hex bolts 2ea 8 Feed the cable down through the pipe socket Wrap seal RUBBER GASKET r tape around the pipe socket Attach the pipe cover to the pipe using the PH M3x10 screws 2ea Insert the rubber gasket between the camera adapter and the adapter flange and connect the adapter flange to Sous the camera adapter using the PH M4x8 screws 4ea Run aia the cables through the camera adapter assembly and screw the camera adapter assembly onto the pipe MS PH Max8 ANCHOR 1 4 BEA k SUS 4EA socket PEX BOLT 1 4 Install the camera into the camera adapter PARAPET PLATE see instructions on back of sheet NOTE Camera installation requires the M4x12 mounting screws supplied with the camera Make sure the o rings are attached to the mounting screws and dome cover torx screws to prevent water ingress Description Dimensions Aluminum amp Steel body 680 Unit 5 8Kg q Maximum load 20Kg SEAL TAPE ADAPTER FLANGE CAMERA ADAPTER 7 3 wy Accessories ee ay m HEX BOLT 1 4 PARAPET
Download Pdf Manuals
Related Search