RSDNT UserManual GasCooktops 70 90
Contents
1. gt Apply the sealing strip provided around the edge of the appliance and remove the protective covering Note It s important not to leave a gap in the sealing strip whilst at the same time ensuring that no sections overlap IMPORTANT Don t use a silicone sealant to seal the appliance against the benchtop This will make it difficult to remove the cooktop in the future should it require servicing gt With the cooktop still upside down place the clamps supplied over the holes that match the size of the screws There are a set of screw holes in each corner of the cooktop Slightly tighten each screw through the clamp so that the clamp is attached to the cooktop but loose enough that you can still adjust it s position gt Now carefully turn the cooktop back over and gently lower it into the cut out Ontheunderside of the cooktop adjust the clamps into a position that is suitable to secure it to your benchtop Now you can fully tighten the screws to secure the cooktop into position C SCREW B CLAMP INALTO USER MANUAL PAGE 10 INSTALLATION INSTRUCTIONS IMPORTANT This appliance must be installed by a licenced and authorised person and in compliance with the current standards IMPORTANT This hob is supplied to run on natural gas only and cannot be used on any other type of gas without modification Refer to the LPG conversion section within this manual A regulator is required and supplied with the Cook2. ICGW71 GAS USER ICGW708 COOKTOP MANUAL ICGW91 ICGW9OS INALT rl INALTO Dear Customer F USER MANUAL PAGE 02 Congratulations on purchasing your new gas cooktop The Inalto brand is proudly distributed within Australia by Residentia Group Pty Ltd Please refer to the warranty card at the rear of this manual for information regarding your product s parts and labour warranty or visit us online at www residentiagroup com au At Residentia Group we are customer obsessed and our Support Team are there to ensure you get the most out of your appliance Should you want to learn more about recommended cooking temperatures the various features of your cooktop and importantly taking care of your appliance when cleaning our Support Team are here to help You can use our online Support Centre at anytime by visiting http support residentiagroup com au or you can contact us via phone by dialling 1300 11 HELP 4357 It is important that you read through the following use and care manual thoroughly to familiarise yourself with the installation and operation requirements of your appliance to ensure optimum performance Again thank you for choosing an Inalto appliance and we look forward to being of service to you Kind Regards The Residentia Team Residentia T 1300 11 4357 Residentia Group E info residentiagroup com au PO Box 581 W residentiagroup com au Stanhope Gardens ACN 600 546 656 NSW Australia 27
3. 760MM NOT ALLOWED RECOMMENDED gt This appliance has been designed for use within a kitchen Important The cooktop must not be installed in a bathroom or shower room This appliance is classified as Class 3 and therefore is to be built into a kitchen unit depending on size or 600mm deep worktop providing the following minimum distances are allowed gt The minimum clearance from a combustible surface shall be a 200 mm horizontal distance from the periphery of any gas burner AS 5601 Where the horizontal clearance is less than 200mm that vertical surface must be protected by a non combustible material for 150mm above the cooktop surface across the entire length depth width indicated below The 150mm protected surface may be ceramic tiles or another approved non combustible material LA gt For the installation of your rangehood a minimum safety clearance of at least 760 mm above the burner cap must be maintained For any flammable objects i e utensil rails wall cabinets shelves etc a minimum clearance of at least 760 mm above the burner cap must be maintained between them and the cooktop below PAGE 09 INSTALLING THE COOKTOP Cut a hole in your benchtop that corresponds with the relevant cut out size for your Inalto Cooktop model Refer to the Your Inalto Cooktop section of this user manual IMPORTANT You must have a gap of at least 30mm between the underside of the cooktop and any surface below
4. If it does then remove the control knob and make further adjustments to the gas flow testing it again once the adjustment has been made gt Repeat this process for each one of the gas taps gt When converting from Natural Gas to ULP gas ensure that the NG regulator is removed and replaced with the Test Point Assembly A gas regulator suitable for a supply pressure of 2 75kPa should be at the inlet to the appliance Replace the old data plate with one which is suitable for the type of gas for which the appliance has been regulated IMPORTANT Where this appliance is installed in marine craft or in caravans it shall not be used as a space heater PAGE 15 GAS TAP MAINTENANCE IMPORTANT The installation must be carried out by a suitably qualified and licensed gas fitter and in accordance with the current standards WARNING Before carrying out any maintenance operations always isolate the cooktop from the electricity and gas supplies If a gas tap becomes stiff to operate then you should proceed as follows gt Remove the control knobs pan supports burners hob fixing screws and clamps Remove the hob from the worktop and remove any underside protective covers Disconnect the fixings holding the tap to the fascia panel and separate the assembly Then clean the cone and seating with a cloth dampened with solvent Lightly smear the cone with high temperature grease reassemble into position and rota
5. 68 PAGE 03 PAGE CONTENT 04 SAFETY INSTRUCTIONS 06 YOUR INALTO COOKTOP OS INSTALLATION INSTRUCTIONS 18 CLEANING amp MAINTENANCE 19 TECHNICAL DATA 20 WARRANTY INFORMATION 22 PURCHASE DETAILS 23 NOTES INALTO USER MANUAL PAGE 04 SAFETY INSTRUCTIONS IMPORTANT Your safety is of the utmost importance to Please make sure that you read this instruction booklet before attempting to install or use the appliance If you are unsure of any of the information contained in this booklet please contact the Retailer where you purchased your unit from The appliance should only be installed and connected by a suitably qualified and authorised person strictly in accordance with the manufacturer s instructions Please see the specific section of this user manual that refers to installation IMPORTANT The gas supply to the cooktop must be cut off before any adjustments or maintenance work is undertaken WARNING When using this product basic precautions should always be taken including the following gt The appliance is designed for domestic household use and for the cooking and frying of domestic foodstuffs P Care should be taken to ensure that the units and work surfaces that you build the appliance into meet with the relevant standards gt Not for use in Marine craft caravans or mobile homes The adjacent furniture and all materials used in the installation must be abl
6. PECIFICATIONS Connection points diagram left 1 Front of cooktop 2 Gas connection point 3 Electrical connection point Above ICGW91 ICGW9OS Above ICGW71 ICGW70S MODEL PRODUCT DIMENSIONS CUT OUT DIMENSIONS WxD CONNECTION POINT LOCATIONS WxDxH DIAGRAMS ABOVE ICGW71 700mm 510mm 40mm 560mm x 480mm Gas XXmm from left XXmm from rear Electrical XXmm from right XXmm from rear ICGW70S 700mm 510mm 40mm 560mm x 480mm Gas XXmm from left XXmm from rear Electrical XXmm from right XXmm from rear ICGW91 860mm 510mm 40mm 850mm x 480mm Gas XXmm from left XXmm from rear Electrical XXmm from right XXmm from rear ICG W90S 860mm 510mm 40mm 830mm x 480mm Gas XXmm from left XXmm from rear Electrical XXmm from right XXmm from rear MODEL BURNERS NG OTHER 1 x14 4 MJ h triple crown wok burner Front control operation 1x10 8 MJ h rapid burner Automatic ignition ICGW71 2 x 6 5 MJ h semi rapid burners Heavy duty cast iron pan stands 1x 3 6 MJ h auxiliary burner Flame failure safety device on each burner 1 x14 4 MJ h triple crown wok burner Side control operation ICGW7OS 1x10 8 MJ h rapid burner Automatic ignition 2 x 6 5 MJ h semi rapid burners Heavy duty cast iron pan stands 1x 3 6 MJ h auxiliary burner Flame failure safety device on each burner 1 x14 4 MJ h triple crown wok burner Front control operation ICGW91 1x10 8 MJ h rapid burner Automatic ig
7. ates at a point 800 mm to 850 mm above the floor and in the region outside the width of the appliance to a distance of 250 mm T a SS 800 L 250 Width of 259 UN M Inlet connection region for flexible hose appllance After connecting to gas check for leaks using soapy solution never a naked flame Gas pressure may be checked by test point located on regulator or LPG test point adaptor Adjust regulator to the required pressure as shown on data plate check burner ignition amp and the flame is burning correctly If after installation and checking the appliance operation the hotplate is not working correctly contact the Residentia Support team on 1300 11 4357 for assistance Fit the duplicate data plate supplied in separate bag on a surface adjacent to the hotplate for example the inside of the cupboard door so it is clearly visible for any service technician Vv y vv INALTO USER MANUAL PAGE 12 INSTALLATION INSTRUCTIONS CHECKING THE GAS SUPPLY 1 2 3 Check the manometer zero point is correct Connect the manometer to the cooktop pressure point located on the regulator Turn on the gas supply and electricity and try to ignite the gas burner Note It will take additional time to light the gas for the first time as air needs to be purged from the pipes With the appliance operating check the outlet pressure gt When all burners of the appliance are operating at maximum When
8. b c d e f g h IN THIS WARRANTY acceptable quality as referred to in clause 10 of this warranty has the same meaning referred to in the ACL ACL means Trade Practices Amendment Australian Consumer Law Act No 2 2010 Appliance means any Residentia Group product purchased by you accompanied by this document ASR means Residentia Group authorised service representative Residentia Group means Residentia Group Pty Ltd of 20 Yaltara Avenue Bundoora Victoria 3083 ACN 600 546 656 in respect of Appliances purchased in Australia major failure as referred to in clause 10 of this warranty has the same meaning referred to in the ACL and includes a situation when an Appliance cannot be repaired or it is uneconomic for Residentia Group at its discretion to repair an Appliance during the Warranty Period Warranty Period means i where the Appliance is used for personal domestic or household use i e normal single family use as set out in the instruction manual the Appliance is warranted against manufacturing defects for 24 months following the date of original purchase of the Appliance you means the purchaser of the Appliance not having purchased the Appliance for re sale and your has a corresponding meaning This warranty only applies to Appliances purchased and used in Australia and is in addition to and does not exclude restrict or modify in any way any
9. ce where present This hob is not fitted with a device for discharging the products of combustion Ensure that the ventilation rules and regulations are followed The walls behind and near the hob should be resistant to heat steam and condensation PAGE 11 GAS CONNECTION Install in accordance with relevant gas standards and or codes of practice applicable Connect the elbow fitting to the appliance gas manifold connection and check that seals between the elbow and manifold connection are in place and in good condition gt For Natural gas connect the natural gas appliance regulator pictured below with integral test point using approved gas thread tape or compound to the elbow fitting gt For Universal LPG connect the brass test point adaptor pictured below using approved gas thread tape or compound to the elbow fitting Natural Gas Regulator Brass test point adaptor Ensure the supply connection point test point and natural gas regulator adjustment screw for Natural gas installation are accessible for testing and or adjustment with the hotplate in the installed position Where a flexible hose assembly is used ensure it is approved to AS NZS 1869 Class B or D and the maximum length is 1 5m Any hose assembly used must be restrained from accidental contact with the flue outlet of an under bench oven This hose assembly shall be suitable for connection to a fixed consumer piping outlet located as follows gt Hotpl
10. d then it must be replaced by an appropriate replacement which can be obtained from Residentia Group or an authorised service agent INALTO USER MANUAL PAGE 16 INSTALLATION INSTRUCTIONS The mains supply cable should be replaced in accordance with the following instructions and by suitably qualified and licenced person Vv vv Ww Nw Switch the appliance off at your mains supply Open the box of the supply board Unscrew the clamp fixing the cable Replace the cable with one of the same length and in accordance with the specification given above The green yellow earth wire must be connected to the terminal marked It must be about 10 mm longer than the live and neutral wires The blue neutral wire must be connected to the terminal marked with letter N the live wire must be connected to the terminal marked with letter L POWER CABLE 240V PAGE 17 CLEANING amp MAINTENANCE By ensuring proper cleaning and maintenance of your Inalto cooktop you can ensure that it will have a long and fault free operation WARNING Do not start cleaning the cooktop until it has completely cooled gt Typically you should only ever need to clean your cooktop with warm soapy water or light cleaning products to assist with the removal of fat or oil emulsions such as general cleaning sprays Your cooktop should be cleaned after every use After cleaning the burners you should ensure they are dried prop
11. e to withstand a minimum temperature of 65 C above the ambient temperature of the room it is located in whilst in use gt Certain types of vinyl or laminate kitchen cabinetry are particularly prone to heat damage or discolouration at temperatures above the guidelines given gt Any damage caused by the cooktop being installed in contravention of this temperature limit will be the liability of the owner gt Your new cooktop is guaranteed against electrical or mechanical defects subject to certain exclusions that are noted in the Warranty Terms and Conditions at the rear of this user manual The foregoing does not affect your statutory rights gt The use of this cooktop for any other purpose or in any other environment without the express agreement of Residentia Group will invalidate any warranty or liability claim gt You should not use this appliance to store items on or as a work surface gt No modifications to the appliance are permitted by Residentia Group gt You should not store or place flammable or highly flammable liquids materials on top of or near the appliance Items made from aluminium plastic or plastic film should also be kept away from the appliance as they may fuse to the surface gt Repairs may only be carried out by authorised service agents gt Your Inalto cooktop is not to be used by children or persons with reduced physical sensory or mental capabilities or lack of experience and knowled
12. ed under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure INALTO USER MANUAL PAGE 22 NOTES PAGE 25 Residentia
13. erly before replacing on the cooktop Avoid any harsh scourer pads or steel wool as these can scratch the stainless steel vvv OPERATION IN CASE OF EMERGENCY In the event of an emergency you should gt Switch off all cooktop controls gt Switch the gas off at the isolation switch or at the gas meter gt Call the Residentia Support Team on 1300 11 HELP 4357 Some minor faults can be fixed by referring to the instructions given in the Troubleshooting section below There is also a self help section online at http www residentiagroup com au TROUBLESHOOTING IMPORTANT If your appliance appears to be operating incorrectly then you should disconnect it from your mains gas and electrical supply and then contact the Residentia Group Support team on 1300 11 HELP 4357 WARNING DO NOT ATTEMPT TO REPAIR THE COOKTOP YOURSELF Please note that if an engineer is asked to attend whilst the product is under warranty and finds that the problem is not the result of an appliance fault then you may be liable for the cost of the call out charge The appliance must be accessible for the engineer to perform any necessary repair If your appliance is installed in such a way that an engineer is concerned that damage will be caused to the appliance or your kitchen then they will not complete a repair This includes situations where appliances have been tiled in or sealed in with sealant Please refer to the conditions of that appear on the war
14. es that the cooktop is built using certified materials and requires the appliance to be installed in accordance with the standards currently in force This cooktop should only be used by a trained person and for domestic purposes only UNPACKING During transportation protective packaging was used to protect the appliance against any damage After unpacking please dispose of all elements of packaging in a way that will not cause damage to the environment All materials used for packaging the appliance are environmentally friendly they are 100 recyclable and are marked with the appropriate symbol gt During unpacking the packaging materials polythene bags polystyrene pieces etc should be kept out of reach of children DISPOSAL OF THE APPLIANCE Old appliances should not simply be disposed of with normal household waste but should be delivered to a collection and recycling centre for electric and electronic equipment A symbol shown on the product the instruction manual or the packaging shows that it is suitable for recycling Materials used inside the appliance are recyclable and are labelled with information concerning this By recycling materials or other parts from used devices you are making a significant contribution to the protection of our environment Information on appropriate disposal centres for used devices can be provided by your local authority INALTO USER MANUAL PAGE 06 YOUR INALTO COOKTOP S
15. ge unless they have been given supervision or instruction gt Any film or stickers that are present on the cooktop when it is delivered should be removed before use gt Care should be used when utilising the cooktop otherwise there is a risk of burns being caused gt You should not allow the electrical connection cables to come into contact with the cooktop surface when it is hot or any hot cookware gt Iffat and oil overheats then it can ignite extremely quickly For this reason when cooking with fat and oil the appliance should not be left unattended Make sure that all of the cooking zones are switched off after use Cleaning of the cooktop should be carried out on a regular basis once the cooktop has cooled down Great care should be taken whilst using this appliance and when following the cleaning procedure You should not use a steam jet or any other high pressure cleaning equipment to clean the appliance vY vV vy Yy PAGE 05 DECLARATION OF CONFORMITY This appliance complies with the following European Directives 2006 95 CE General regulations Low tension 2009 142 CE Concerning gas appliances 1935 2004 CE 90 128 EEC This appliance is suitable to come in contact with food 2004 108 CE Electromagnetic compatibility AS4551 Domestic gas cooking appliances Low voltage 73 23 Safety standards EN 60335 1 EN30 1 1 AS NZS 3350 1 3350 2 6 The manufacturer declar
16. nition 2 x 6 5 MJ h semi rapid burners Heavy duty cast iron pan stands 1x 3 6 MJ h auxiliary burner Flame failure safety device on each burner 1 x14 4 MJ h triple crown wok burner Front control operation ICGW90S 1x 10 8 MJ h rapid burner Automatic ignition 2 x 6 5 MJ h semi rapid burners Heavy duty cast iron pan stands 1x 3 6 MJ h auxiliary burner Flame failure safety device on each burner COOKTOP COMPONENTS Your Inalto cooktop is supplied with gt LPG conversion jets optional use gt Regulator gt Sealing strip PAGE 07 CONTROLS The following symbols will appear on the control panel next to each control knob O gt gt Gas off Large flame maximum setting 6 Small flame minimum setting The minimum setting is at the end of the anti clockwise rotation of the control knob All operation positions must be selected between the maximum and minimum position Never select a knob position between the maximum and off position m burner indicator The symbol above indicates which gas burner the knob operates AUTOMATIC IGNITION WITH FLAME FAILURE SAFETY DEVICE Your Inalto cooktop is fitted with a flame failure safety device on each burner which is designed to stop the flow of gas to the burner head in the event of the flame going out To ignite a burner gt Press in the control knob of the burner that you wish to light and turn it anti clockwise to the maximum position gt Ifyou keep the con
17. non excludable statutory warranties in Australia During the Warranty Period Residentia Group or its ASR will at no extra charge if your Appliance is readily accessible for service without special equipment and subject to these terms and conditions repair or replace any parts which it considers to be defective Residentia Group or its ASR may use remanufactured parts to repair your Appliance You agree that any replaced Appliances or parts become the property of Residentia Group This warranty does not apply to light globes batteries filters or similar perishable parts Parts and Appliances not supplied by Residentia Group are not covered by this warranty PAGE 21 5 You Will bear the cost of transportation travel and 10 For Appliances and services provided by Residentia delivery of the Appliance to and from Residentia Group in Australia the Appliances come with a Group or its ASR If you reside outside of the service guarantee by Residentia Group that cannot be area you will bear the cost of excluded under the Australian Consumer Law a travel of an authorised representative You are entitled to a replacement or refund for a b transportation and delivery of the Appliance to and major failure and for compensation for any other from Residentia Group or its ASR in all instances reasonably foreseeable loss or damage You are also unless the Appliance is transported by Residentia entitled to have the Appliance repaired or replaced Gro
18. proper or inappropriate operation d telephone the numbers shown below vii insect or vermin infestation 13 You accept that if you make a warranty claim viii failure to comply with any additional instructions Residentia Group and its ASR may exchange supplied with the Appliance information in relation to you to enable Residentia b the Appliance is modified without authority from Group to meet its obligations under this warranty Residentia Group in writing c the Appliance s serial number or warranty seal has IMPORTANT been removed or defaced Before calling for service please ensure that the steps in d the Appliance was serviced or repaired by anyone point 12 have been followed other than Residentia Group an authorised repairer or ASR Telephone contacts 8 This warranty the contract to which it relates and the Service Please call 1300 11 HELP 4357 relationship between you and Residentia Group are gt Spare Parts Please call 1300 11 SPARE 7727 governed by the law applicable where the Appliance was purchased 9 To the extent permitted by law Residentia Group excludes all warranties and liabilities other than as contained in this document including liability for any loss or damage whether direct or indirect arising from your purchase use or non use of the Appliance The Australian Consumer Law requires the inclusion of the following statement with this warranty Our goods come with guarantees that cannot be exclud
19. ranty card at the rear of this user manual INALTO USER MANUAL PAGE 18 TECHNICAL DATA ELECTRICAL DETAILS Rated Voltage 220 240 Vac 50 60 Hz Supply Connection 3A Max Rated Inputs 0 8 W Mains Supply Lead 3 core x O 75mm2 Type RR F lt HAR gt marked GAS TYPE AND OPERATING Connection Rp 1 2 ISO R7 PRESSURE Type Natural Gas 1 0 KPa ULPG 2 75 KPa PAGE 19 RECEIPT PURCHASE DETAILS For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice The rating plate of your hob is located on the underneath of the appliance Therefore please fit the duplicate data plates or label on the outside of the cupboard to sure that the label can be easily seen during operation STORE DETAILS STORE NAME ADDRESS TELEPHONE PURCHASE DATE PRODUCT DETAILS MODEL NO SERIAL NO Note Your serial number can be found on the underside of the cooktop INALTO USER MANUAL PAGE 20 WARRANTY INFORMATION WARRANTY TERMS CONDITIONS COOKING APPLIANCES BUILT IN OVENS COOKTOPS This document sets out the terms and conditions of the product warranties for Residentia Group Appliances It is an important document Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance 1 a
20. screw the injector B and replace it with the stipulated injector for the new gas supply see table below GENERAL INJECTORS TABLE KIND OF GAS NOZZLE BURNERS MM NATURAL Wok Rapid Semi rapid Auxiliary MACS Wok BUTANE Rapid PROPANE Semi rapid Auxiliary gt Reassemble all the burners carefully in particular you should make sure that the flame spreader is correctly placed on the burner IMPORTANT The minimum flow adjustment process must be completed before the appliance is next used INALTO USER MANUAL PAGE 14 INSTALLATION INSTRUCTIONS MINIMUM FLOW ADJUSTMENT FOR COOKTOP GAS TAPS IMPORTANT All work must be carried out by a registered gas fitter and in accordance with the current standards WARNING Always isolate the cooktop from the electricity and gas supply before changing the injectors and or adjusting the minimum flow of the burners gt Switch the burner on and set the knob at the minimum position gt Remove the knob from the tap and place a small bladed screwdriver in the centre of the tap shaft gt Unscrew the adjusting screw in order to increase the gas flow or tighten the adjusting screw to decrease the gas flow gt The correct adjustment is obtained when the flame has a length of about 3 4 mm gt For ULP gas the adjusting screw must be tightly screwed in gt Refit the control knob gt Make sure that the flame does not go out by quickly turning from maximum flow to minimum flow
21. t pans can be used on a gas burner gt Always place the pan on the pan support supplied with the cooktop Do not place a pan directly on top of the burner gt Remember when purchasing new pans that manufacturers usually refer to the diameter at the top of the pan in their documentation D Usea lid whenever possible to minimise heat loss gt When using a wok make sure that the base does not touch the burner A distance of 1 cm should be maintained between the burner and the base of the wok pan above it Warning Place pots and pans flat on the cooktop trivets to ensure they do not tip over Slight tilting cannot always be avoided INALTO USER MANUAL PAGE 08 INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS It s important to carefully read the following installation instructions before beginning the installation of your cooktop IMPORTANT The installation must be carried out by a suitably qualified and authorised person in accordance with the current version of the following AS NZS5601 1 Gas Installations current edition NZS 5261 Code of Practice for the Installation of Gas Burning Appliances and Equipment New Zealand Local gas fitting regulations AS NZS 3000 Electrical Installations Wiring Rules Building codes Installation Instructions vvwvvwvvvv POSITIONING The adjacent cabinetry and wall materials must be able to withstand a minimum temperature rise of 65 C above the ambient temperature of the room
22. te a few times Remove the cone again and remove any excess grease making sure that the gas ducts are not obstructed with grease Carefully reassemble the components and perform a gas soundness test If it becomes necessary to replace a gas tap then you should proceed as follows gt Remove the control knobs pan supports burners hob fixing screws and clamps gt Remove the hob from the worktop and remove any underside protective covers gt Disconnect the fixings holding the tap to the fascia panel and separate the assembly gt Disconnect the gas pipe from the gas tap and then disassemble them from the gas rail by removing the fixing screws gt When fitting a new tap ensure that a new gasket is used gt Reconnect the gas tap perform a gas soundness test and then reassemble the hob ELECTRICAL CONNECTION IMPORTANT The installation must be carried out by a suitably qualified and licensed person and in accordance with the latest edition of the AS NZS 3000 Wiring Regulations and in compliance with the instructions outlined within this user manual WARNING 240 Volts Disconnect power before servicing the cooktop Before connecting the appliance make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage gt gt Cable type HO5 RRF 3 core x 0 75 mm Type RR F lt HAR gt marked The mains supply cable is supplied with this product If the mains supply cable is damage
23. the smallest burner of the appliance is operating at minimum gt Under these conditions the outlet pressure should not vary from the nominal outlet pressure of 1 00kPa by more than 0 20kPa If the regulator appears to not be performing satisfactorily then check the following points 1 If the outlet pressure is consistently too low then the inlet pressure may be too low and adjustment of an upstream regulator may be needed or an upstream regulator or valve with insufficient flow capacity may be present in the gas supply line If this is suspected then it may be necessary to repeat the checks whilst measuring both the inlet and outlet pressure to determine if the inlet pressure is in the range 1 13 5kPa Check that the regulator has been fitted to the gas supply line in the correct orientation the arrow on the base of the body indicates the direction of gas flow Once these checks have been completed if the regulator still fails to perform in a satisfactory manner it should be replaced Please contact the Residentia Support Team on 1300 11 4357 PAGE 13 GAS ADJUSTMENT CONVERSION TO LPG IMPORTANT The conversion work must be carried out by a registered gas fitter and in accordance with the current standards WARNING Always isolate the cooktop from the electricity supply before changing the injectors and or adjusting the minimum flow of the burners gt Remove the pan stands burners and flame spreaders A gt Un
24. top for natural gas Conversion for use on LPG and other gases must only be undertaken by a qualified and authorised person For information on the use of other gases please contact the Customer Care department Test point adaptor is required for LPG The hob must be installed by a qualified and authorised person in accordance with the current edition of the AS NZS5601 1 Gas Installations Failure to install the appliance correctly could invalidate guarantee and lead to prosecution under the regulations quoted above VENTILATION REQUIREMENTS gt gt The room containing the hob should have an air supply in accordance with AS NZS5601 1 Gas Installations The room must have opening windows or equivalent some rooms may also require a permanent vent It will require an air vent of 300 mm per MJ h effective area to outside or 600 mm per MJ h effective area to adjacent room See total gas consumption in MJ h on the appliance rating plate If there are any other fuel burning appliances in the same room the standardAS NZS5601 1 Gas Installations should be consulted to determine air vent requirements Ensure that the room containing the hob is well ventilated keep natural ventilation holes or install a mechanical ventilation device mechanical cooker hood Prolonged intensive use of the appliance may call for additional ventilation either by the opening of a window or by increasing the level of the mechanical ventilation devi
25. trol knob depressed the automatic ignition for the burner will operate gt You should hold down the control knob for 10 seconds after the flame on the burner has lit gt After this 10 second interval turn the control knob to your required setting between the maximum and minimum setting symbols gt To switch the burner off turn the control knob fully clockwise to the gas off position gt Incase of power failure the burners can be lit by carefully using a match SUITABLE PANS gt Refer to the chart below and ensure that the pan diameter falls within the minimum and maximum diameters given for the burner to you using A pan base which is too small will be unstable on the pan support If the pan diameter is too large flames can spread out to the sides and damage or burn the worktop wall claddings or surrounding units and also parts of the cooktop The manufacturer cannot be held liable for this type of damage Min pan base diameter in cm Max diameter at top of pan in cm Wok burner D Wide shallow pans are preferable to tall narrow ones They will heat up faster gt Select pans which are suitable for the burner they are to be used on In general use larger diameter pans on the large burners and smaller diameter pans on the small burners D Pans with thick bases are preferable as these distribute heat more evenly With thin bases there is a danger of food overheating in places Stir the food frequently gt Any heat resistan
26. up or its ASR the Appliance is transported at the if the Appliance fails to be of acceptable quality and owner s cost and risk while in transit to and from the failure does not amount to a major failure The Residentia Group or its ASR benefits to you given by this warranty are in addition 6 Proof of purchase is required before you can make a to your other rights and remedies under a law in claim under this warranty relation to the Appliances or services to which the 7 You may not make a claim under this warranty unless warranty relates the defect claimed is due to faulty or defective parts 11 At all times during the Warranty Period Residentia or workmanship Residentia Group is not liable in the Group shall at its discretion determine whether following situations which are not exhaustive repair replacement or refund will apply if an a the Appliance is damaged by Appliance has a valid warranty claim applicable to it i accident 12 To enquire about claiming under this warranty please ii misuse or abuse including failure to properly follow these steps maintain or service a carefully check the operating instructions user iii normal wear and tear manual and the terms of this warranty iv power surges electrical storm damage or b have the model and serial number of the Appliance incorrect power supply available v incomplete or improper installation c have the proof of purchase e g an invoice available vi incorrect im
Download Pdf Manuals
Related Search