Home

UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual

image

Contents

1. set the following parameters e Mask On Off e Color Blue Pink Yellow Cyan Coffee White Red Green e H Start Start of horizontal position 0 to 500 e H End End of horizontal position 0 to 500 e V Start Start of vertical position 0 to 280 e V End End of vertical position 0 to 280 e Return Press Enter to return to the previous menu e Exit amp Save Exits the menu and returns to live mode Saves changes made Press Enter to return to the previous menu Exits the menu and returns to live mode Saves changes made Picture adjustment menu Set the camera image characteristics such as brightness contrast sharpness hue and saturation called Gain here of the picture Select the Pict Adjust option from the Main menu to enter the Picture menu Figure 11 Picture adjustment menu S PICTURE MENU BRIGHTNESS MUTT CONTRAST Tinn SHARPNESS mime HUE MUTT GAIN 10 RETURN 4 EXIT amp SAVE Reset camera Use this function to restore the camera parameters to the factory defaults values Select the Reset option from the Main menu to restore factory default values Specifications Model UVD 6120VE 2 P UVD 6120VE 2 N Lens type Varifocal 2 8 to 10 mm Power supply 24 VAC 12 VDC Current 250 mA Max 400 mA heater on 12 UltraView UVD 6120VE 2 Digital WOR Dome Camera User Manual Model UVD 6120VE 2 P UVD 6120VE 2 N Power consumption 3W Max 9 6 W heater on Operating temperature 30 to 50 22
2. the dome camera will then continue to display all colors correctly even when the color temperature of the scene changes such as from daylight to fluorescent lighting for example Select the W B Mode option from the Main menu to enter the WB Mode menu Figure 8 AE WDR BLC menu S WE MODE MENU ATW OFF MANUAL R Gain OUTDOOR INDOOR ANTI CR RETURN WJ EXIT amp SAVE Table 4 AE WDR BLC menu Menu item ATW Manual Outdoor Indoor Anti CR Return Exit amp Save Description The auto track white balance ATW function automatically adjusts the WB in real time as the lighting conditions change It can be used for both indoor and outdoor locations Manually fix the white balance by adjusting the blue and red gain parameters Only use this function when there is steady light Values can be adjusted between 5 and 5 Select this option to optimize the WB for outdoor sunlit applications The ATW compensates for high color temperature such as daylight Select this option to optimize the WB for indoor applications The ATW compensates for low color temperature such as incandescent lighting The anti color rolling mode function minimizes the color changes over long periods caused by very small differences between the flicker frequency of non inverter fluorescent lights and the drive frequency of the image sensor devices Press Enter to return to the previous menu Exits the menu and returns to live mode Save
3. to 122 F Weight 1130 g 2 49 Ibs Dimensions 5 22 in 133 mm UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual wu yS ww TS ul eTe LULU SOT Ul TT Ul GGT Menu Map ID Display General Minor DNR Lens Type WDR BLC Set AE WRD BLC AGC Max Flicker ATW Manual WB Mode Outdoor Indoor Auto Day D N Mode Night Ext Label Frame Label 1 abel Color un i Motion Det mg sr 2 H Start La Detect T Label 3 E H end Main Label4 v Start Menu V End Mask 1 Mask 2 Mask On Off Privacy Mask 3 Color Mask 4 H Start H End V Start V End Brightness Picture Contrast Sharpness Hue Gain Reset Exit amp Save 14 UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual
4. twist 3 axis grimbal rotating platform so that it is easy to adjust the camera orientation See Figure 3 on page 6 UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual 5 Figure 3 Camera adjustment Platform horizontal adjustment 0 to 180 TT Platform vertical adjustment 0 to 90 4 ka F aay P Rotor horizontal adjustment 0 to 350 ha kj F k F E koai To adjust the lens See Figure 3 above 1 To adjust the horizontal angle of the platform up to 180 degrees turn the platform 2 To adjust the horizontal angle of the rotor up to 350 degrees turn the rotor on the platform 3 To adjust the vertical angle of the platform up to 90 degrees turn the platform Adjust the focus and zoom Figure 4 Zoom and focus adjustment Zoom ring thumbscrew Focus ring thumbscrew To adjust the camera zoom and focus 1 Loosen the zoom ring thumbscrew and turn the zoom ring to set the desired zoom Tighten the thumbscrew 2 Loosen the focus ring thumbscrew and turn the focus ring to set the desired focus Tighten the thumbscrew 6 UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual Programming Access the Main menu The Main menu provides access to the camera configuration options The on screen display OSD is only available in English Program the camera by attaching a standard video monitor to the system Figure 5 The Main menu S MAIN MENU GENERAL m AE WDR BL
5. values then camera may switch between Day and Night mode repeatedly Manually select Day mode only The camera can only be in Day mode Manually select Night mode only The camera can only be in Night mode Externally triggered D N Press Enter to return to the previous menu Exits the menu and returns to live mode Saves changes made Motion alarm menu A motion detection alarm is an alarm that is triggered when the camera detects a motion You can define up to four areas on screen where the motion can be detected as well as the level of sensitivity to motion Select the Motion option from the Main menu to enter the Motion menu Figure 9 Motion menus E MOTION MENU MOTION DET MD DETECT TH RETURN EXIT amp SAVE S LABEL SELECT S LABEL SETUP ENABLE u LABEL 1 SETUP LABEL FRAME ON mi l LABEL 2 SETUP LABEL COLOR RED LABEL 3 SETUP H START TE LABEL SETUP 4 H END mr 6 V START me VEND mor 14 RETURN RETURN J EXIT amp SAVE J EXIT amp SAVE UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual Table 6 Motion alarm menu Menu item Description Motion Detec When enabled you can set up four motion detection areas Labels on screen For each label set the following parameters e Label frame On Off e Label color Blue Pink Yellow Cyan Coffee White Red Green e H Start Start of horizontal position 0 to 23 e H End End of horizontal position 0 to 23 e V Start Start of vertical posit
6. C m WB MODE D N MODE MOTION l PRIVACY PICT ADJUST RESET CAMERA EXIT amp SAVE To access the menus 1 Press the OSD control pad to access the Main menu and its submenus Push the pad up down left and right to move between menu options Press the OSD control pad Enter to select an option When in a sub menu select Return to return to the previous menu sa me ll ee To exit the Main menu move the cursor to Exit at the bottom of the screen and press Enter All changes are saved General menu Select the General option from the Main menu to enter the General menu Figure 6 The General menu S GENERAL MENU ID DISPLAY OFF MIRROR OFF DNR ON 4 RETURN J EXIT amp SAVE J Table 2 General menu Parameter Description ID display Displays the camera ID on screen Default option is Off Mirror Flips the camera image so that it is correctly orientated for viewing UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual Parameter DNR Return Exit amp Save Description Default option is Off Digital noise reduction DNR improves the image quality in low light levels When enabled select the Y and C filter strength Press Return to return to the previous menu or Exit amp Save to save changes and return to live mode Default option is On Press Enter to return to the previous menu Exits the menu and returns to live mode Saves changes made AE WDR BLC menu Select the AE WDR BLC optio
7. P to process video signals The camera includes a microcontroller to provide high quality images with high color reproduction and sharp pictures Package Contents The package contains the following Dome camera Monitor output cable Mounting screws wall anchors and hex wrench Power terminal Ceiling drilling holes template Note Use the video output BNC and power jack for normal system operation Use the monitor output cable for installation and maintenance Features The camera includes the following features EXview HAD II hole accumulated diode technology with 480 000 pixels NTSC 570 000 PAL Use of LSI large scale integration digital processors to produce 650 lines of horizontal resolution Smart digital control automatic BLC backlight compensation Digital wide dynamic range WDR Advanced auto exposure system for both fixed iris and auto iris lenses to optimize the amount of light Internal synchronization Eight privacy mask areas to protect privacy concerns Advanced OSD onscreen display control Signal to noise ratio better than 52 dB Long life and high reliability Isolated switching power 12 VDC and 24 VAC User guidelines Program the camera settings as much as possible before mounting the camera Take appropriate safety precautions while completing programming after installation UltraView UVD 6120VE 2 Digital WOR Dome Camera User Manual e Always use a 12 VDC or 24 VAC UL listed Class 2 power s
8. a a interlogix A UTC Fire amp Security Company UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual P N 1072553A REV 1 0 ISS 18JUN12 Copyright Trademarks and patents Manufacturer Certification FCC compliance ACMA compliance European Union directives Contact information 2012 UTC Fire amp Security All rights reserved The TruVision and Interlogix names and logo are trademarks of UTC Fire amp Security Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products UTC Fire amp Security Americas Corporation Inc 2955 Red Hill Avenue Costa Mesa CA 92626 5923 USA Authorized EU manufacturing representative UTC Fire amp Security B V Kelvinstraat 7 6003 DH Weert The Netherlands CE Gv u31 Class A This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
9. correct the interference at his own expense Notice This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures 12004 108 EC EMC directive Hereby UTC Fire amp Security declares that this device is in compliance or with the essential requirements and other relevant provisions of Directive 2004 108 EC 2002 96 EC WEEE directive Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union For proper recycling return this product to your local supplier upon the purchase of equivalent new equipment or dispose of it at designated collection points For more information see www recyclethis info For contact information see www uitcfireandsecurity com or www utcfssecurityproducts eu Content Product overview 2 Package Contents 2 Features 2 User guidelines 2 Product description 3 OSD control pad 3 Installation 5 Mount the camera 5 Connect the cables 5 Adjust the lens 5 Adjust the focus and zoom 6 Programming 7 Access the Main menu 7 General menu 7 AE WDR BLC menu 8 WB mode menu 9 D N mode menu 9 Motion alarm menu 10 Privacy menu 11 Picture adjustment menu 12 Reset camera 12 Specifications 12 Dimensions 13 Menu Map 14 UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual Product overview The UVD 6120VE 2 XX camera uses a digital signal processor DS
10. ion 0 to 23 e V End End of vertical position 0 to 23 e Return Press Enter to return to the previous menu e Exit amp Save Exits the menu and returns to live mode Saves changes made Defines the motion or face threshold MD Detect Th Select a value between 0 and 127 A lower value means detection is more sensitive Return Press Enter to return to the previous menu Exit amp Save Exits the menu and returns to live mode Saves changes made Privacy menu Privacy masks let you conceal sensitive areas Such as neighboring windows to protect them from view on the monitor screen and in the recorded video The masking appears as a blank colored area on screen You can create up to 4 privacy masks Select the Privacy option from the Main menu to enter the Privacy menu Figure 10 Privacy mask menus vi DE MASK MENU MASK ON OFF OFF COLOR WHITE H START NA H END NA f PRIVACY MENU V START NA MASK 1 SETUP V END NA MASK 2 SETUP MASK 3 SETUP MASK 4 SETUP RETURN EXIT amp SAVE J 3 r 1 1 MASK MENU RETURN 4 MASK ON OFF ON EXIT amp SAVE i COLOR WHITE H START mm NA H END nm NA V START mm NA V END mn NA RETURN 4 EAT amp SAVE A UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual 11 Table 7 Privacy menu Menu item Mask 1 Setup Mask 2 Setup Mask 3 Setup Mask 4 Setup Return Exit amp Save Description When enabled you can set up four privacy mask areas on screen For each mask
11. l pad to display the Setup menu If the Elei selected item has its own menu press the control pad to enter a submenu Press the control pad for 2 seconds to save all settings and exit the Setup menu 4 UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual Installation Please check the package contents and make sure that the device in the package is in good condition and all the assembly parts are included To install the camera you will need to prepare the mounting surface mount the camera make cable connections adjust the lens and then secure the dome cover securely Note Before installing please ensure that the mounting surface is strong enough to withstand three times the weight of the camera If the mounting surface is not strong enough the camera may fall and cause serious damage Mount the camera Use the ceiling drilling holes template and mark the holes on the ceiling with a pen Attach the plate with fasteners to the ceiling and then attach the camera body to the plate To mount the camera attach the camera to the mounting surface using the appropriate fasteners Connect the cables To connect the cables 1 Connect a coaxial cable from the camera s BNC connector to a CCTV monitor or video recording device 2 Connect the 12 VDC or 24 VAC power supply to the power jack of the camera Caution Check for polarity when using a 12 VDC power supply Adjust the lens The camera is mounted on a pan tilt
12. n from the Main menu to enter the AE menu Figure 7 The AE WDR BLC menu S AE MENU LENS TYPE DC WDR BLC SET OFF AGM MAX mm 120 FLICKER OFF RETURN 4 EXIT amp SAVE Table 3 AE WDR BLC menu Menu item Lens type WDR BLC set AGC max Flicker Return Exit amp Save Description Defines the lens type used with the camera Select Fixed or DC If DC is enabled select the DC level and shutter speed from the options shown Wide dynamic range WDR allows you to see details of objects in shadows or details of objects in bright areas of frames that have high contrast between light and dark areas such as the headlights of a passing car Backlight compensation BLC function improves image quality when the background illumination is high It prevents the object in the center from appearing too dark Options are e Off e WDR Set the luminance level Low Middle High e BLC fix set the BLC level between 1 and 30 and the BLC window Defines the automatic gain control AGM Select a value between 0 and 160 This feature to prevent the strobing effect under certain lighting conditions shutter speeds Default option is Off Press Enter to return to the previous menu Exits the menu and returns to live mode Saves changes made UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual WB mode menu White balance WB tells the dome camera what the color white looks like Based on this information
13. s changes made D N mode menu This camera function controls when the dome camera switches to day or night mode The dome camera produces high quality color video during the day or when light levels are high At night or when light levels are low the camera switches monochrome and removes the infrared filter to improve IR sensitivity Select the D N Mode option from the Main menu to enter the D N mode menu UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual 9 Table 5 D N mode menu Menu item Auto Day Night Ext Return Exit amp Save Description When set to Auto Day Night mode the camera produces high quality color video during the day or when light levels are high It then switches to monochrome and removes the infrared filter to improve IR sensitivity at night or when light levels are low Set following parameters Day Night Set the threshold level on how dark it should be before switching from Day to Night mode Lower Higher value makes the camera switched from Day to Night at lower higher illumination Night Day Set the threshold level on how light it should be before switching from Night to Day mode Delay seconds This is the time in seconds before Day lt gt Night switches A long delay response would be used for example to avoid switching from Night to Day mode when car headlights pass in front of the camera CAUTION If there is a minimal difference between the Day Night and Night Day
14. upply to power the camera e Do not use the camera over the temperature range specifications 22 to 122 F 30 to 50 C e If the light source where the camera is installed experiences rapid wide variations in lighting the camera may not operate as intended WARNING To reduce the risk of fire or electronic shock do not expose the camera to rain or moisture and do not remove the cover or back Product description Figure 1 Camera description fy Camera body OSD control pad System heater 2 Ss VDA Fl S if 4 pr F if rf j wa ff ae 7 z p HF a ray al ae aaae POWE jack pir A F Monitor output cable Video monitor output Video output BNC 1 Monitor output BNC 2 Monitor output RCA OSD control pad The onscreen display OSD control pad Figure 3 is a five direction pad that provides the ability to manually control the camera functions Table 1 below lists the OSD control pad functions and describes their use UltraView UVD 6120VE 2 Digital WDR Dome Camera User Manual 3 Figure 2 OSD control pad OSD control pad Table 1 OSD control pad functions Pad directions Description Up Moves the cursor upward to select an item Left Moves the cursor left to select or adjust the options of the selected item Riaht Moves the cursor to the right to select or adjust the options of the g selected item Down Moves the cursor downward to select an item Press the center of the contro

Download Pdf Manuals

image

Related Search

Related Contents

  BT-DRF-02 DE - WATTS ELECTRONICS  DuraVision FDS1903 取扱説明書  

Copyright © All rights reserved.
Failed to retrieve file