Day & Night Digital Camera User' Manual - E
Contents
1. LC NightView w D Gamma Correct ync Mode ens Mount Video Output Audio Output ower Consumption 3 CS C with Ring 1 0Vp p 75 Ohm sync negative polarity Optional ower supply Low Voltage DC12V AC24V Main Voltage 90 240VAC 10 C 50 C Rh95 MAX 121 X62 X 60 mm Two 14 20 UNC bot and top Dimension Camera Mount All data subject to change without notice 1 50 PAL second to 1 100 000 second according to the luminance conditions of the scene ES OFF The shutter speed is fixed at 1 60 NTSC 1 50 PAL second Set ES off when auto iris lens is used or flicker is observed under a very bright fluorescent lamp Otherwise turn ES on for optimum performance 4 NightView NightView ON NightView extends the low light performance of the camera The camera increases sensitivity automatically at low illumination The camera automatically switch from color to high sensitive B W at night NOR A nature and low noise picture is obtained under low light 5 Synchronization Select LINE LOCK to synchronize with the power supply frequency Select INTERNAL for use with internal synchronization selected with DC supply 6 White Balace ATW Auto tracking white balance allows the camera to constantly adjust for optimal color reproduction AWB Automatic white balance control is prorided between 2700K to 10 000K and fixes it 7 Iris level adjustment To adjust the brightness of the image when2. operating instructions should be retained for future reference Head Warning All warnings on the product and in the operating instructions should be paid attention to Follow instructions All operating and user instructions should be followed Cleaning Unplug this product from the outlet before cleaning water amp Moisture Do not use this product near water such as bath tub wash bowl kitchen sink laundry tub do not use it in a wet basement or near a swimming pool Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed on or against them Pay particular attention to cords at plugs convenience receptacles and the point where they exit from the product Lightning For added protection for these products during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet Object amp Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or Short out parts that could result in a fire or electric shock never spill liquid of anyth king on the product mu a Installation Instructions Remove the cover cap from the top of lens mount i The camera is equipped with a standard CS mount For C mount lens an optional C to CS adapter ring must be used 3 Screw the lens firmly onto the lens mount Power input A Low voltage Connect the A
3. C 24V or DC12V Power source to the power input terminals positive wire for DC any supply wire for AC negative wire for DC other supply wire for AC safety ground voltage from any supply wire should be less than 50V Mains voltage Connect this power cord to an electrical outlet of 110VAC 220VAC 60Hz 50Hz 5 Connect the video output of the camera to a monitor or other video device through a 75 type coaxial cable with BNC female connector at camera end 6 Once the image appears on the monitor adjust the focus and diaphragm of the lens to obtain the best picture VI A oo mf ow 7 If the subject is not in focus adjust as following a Set the focus ring of the lens to infinity position b Take picture of subject at a distance more than 20mm away from the camera c Loosen the lens mount fixing screw located at bottom of the front panel by using the L wrench supplied d Turn the lens and the mount together so the subject is in focus e Make sure the lens mount fixes screw firmly again E Special Feature 1 Auto Iris lens For this camera please use auto lens wire the cable of lens to Mini Plug according to the following table Auto iris Lens Connector Pint Pin2 Pin3 Pin4 Video drive 12V NC VD IRIS GND Direct drive damp damp ODrv Drv Vl occur If so each time you switch the monitor to another camera the video picture will be unsynchronized for a short period rolling picture By
4. Day amp Night Digital Camera User Manual Features This camera adopt high sensitive color Sony EX View HAD CCD provides high resolution high sensitivity and high contrast picture ensure good identification in all circumstances Thecamera provides automatic mode changeover by sensing day or night conditions It can change color mode in the day condition to optimal color and B W mode in night condition for clear identification Auto Electronic Shutter and Automatic Gain Control Automatic White Balance Back Light Compensation Use Auto iris lens of standard 4 pin connector User friendly back focus adjustment Automatic synchronization to local mains with AC power Low voltage and mains voltage models The camera can be supplied with either low voltage or AC powered Ver 4 48 C 05XEB I Servicing Do not attempt to service this product yourself as removing covers expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Damage requiring service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the products have been exposed to rain or water d if the products haven s operated normally by following the instructions e lf the products have been dropped or damaged in any par
5. a DC iris lens is used 8 V phase adjustment only functional when the camera is AC powered When more cameras are connected to different AC power groups and share the same monitor video recorder etc AC phase differences may IX Type number overview ee E E ee 12VDC 24VAC 50HZ 12VDC 24VAC 60HZ AC90V 240V 50HZ AC90V 240V 60HZ EJ Dimension Outline 121mm Bottom view
6. era to humidity and dust If camera is mounted outdoor camera housing is required 2 Handle with care This camera consists of sensitive high precision parts Do not disassemble it or place it on an unstable base 3 Do not touch the surface of CCD sensor by hand directly When the camera is notin use put the cover cap on the lens mount 4 This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company I i The exclamation mark within a triangle is intended to alert the user to EJ Parts and Purpose Descriptions 1 3 1 Use one of the screw holes to mount the camera 2 The camera is equipped with a standard CS mount For C mount lens an optional C to CS adapter ring must be used 3 Back focus locking screw must be released before adjusting the back focus 4 Power input 5 Video signal output 75 Q impedance 6 Audio signal output optional Accessories amp Q L Wrench Auto Iris connector adapter ring V 5 Never face the camera toward the sun 6 Use Auto iris lens or N D filter or set large F number of manual lens when in high light intensity in order to protect the sensitive CCD sensor EJ important Safety Instructions Read instruction All safety and operating instructions should be read before the product is operated Retain instruction The safety and
7. means of the V phase adjustment you can synchronize the came EA venses The camera is provided with a standard CS mount Therefore a wide range of lenses can be used For example a _ fixediris lenses b manual iris lenses c DC auto iris lenses d Video auto iris lenses Notes 1 For indoor use you can use a fixed iris lens For outdoor applicatio a DC or Video auto iris lens is recommended 2 Try to avoid bright light sources in the camera s field of view when use a fixed iris lens They may cause smear in the picture When you use a DC or Video auto iris lens the smear will be reduc 3 When you use a DC or Video iris lens itis recommended to set the Auto Electronic Shutter ES switch to the OFF position 4 When an C CS mount adapter optional is used C mount lenses c also be applied EJ Technical Specifications g Adjustment Figure 1 IRIS switch Set this switch to DC when using a DC iris lens Set this switch to VIDEO when using a Video iris lens Set the ES switch to NOR when a DC or Video iris lens is used 2 Back Light Compensation When BLC is turned on the AGC ES and IRIS operating point is determined by averaging over the center area instead of entire field of view so that a dimly lit back grounds from brightly lit BLC should not be used unless it is needed to compensate for back light 3 Electronic Shutter ES ON Continuously adjust the shutter speed from 1 60 NTSC
8. t f When the product exhibits distinct change in performance Any of above situation indicates a need for service Replacement parts when replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part unauthorized substitutions may result in fire electric shock or other hazards Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the products is in proper operating condition Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat N SAFETY PRECAUTIONS Warning To prevent fire or shock hazard do not expose camera or monitor to rain or moisture intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The lightning flash with arrowhead symbol within a triangle is To reduce the risk of electric shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service sock poNoTorN personnel the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance ER Warning A 1 Do not expose the cam
Download Pdf Manuals
Related Search