Quick User Guide Suzo nr: 177-0700
Contents
1. solid red or flashing red is shown on stacker 2 The display above will be shown Press SPLIT 3 Re feed the UNFIT and suspect notes from stacker 2 3a If you have not re fed the notes within 5 seconds this display will appear Press NO to continue the SPLIT The Nvision will re show display number 3 5 Remove the UNFIT notes from stacker pocket 1 and the suspect note from stacker pocket 2 4 The notes have now been SPLIT Authentic but UNFIT notes will physically be in stacker 1 but shown on stacker 2 of the display Suspect notes will physically be in stacker 2 but shown as CULL on the display Press CLOSE 6 Continue the count or END the current batch If END is pressed the display will show READY FOR NEW BATCH Additional Notes Feature These features are only available on machines fitted with Fitness Detection TP10613010 Rev 02 Copyright 2009 by Talaris Ltd Basingstoke UK Page 2 of 2 Talaris House Crockford Lane Chineham Business Park Basingstoke Hampshire RG24 8QZ England Telephone 44 0 1256 368000 Fax 44 0 1256 368001 www talaris com2. Suzo nr 177 0700 Model Nvision Virtual Pocket Processing 1 Display Control Panel Process Selection Function Selection Zero Returns you to standard Scroll arrow Scrolling through display note authentication keys options 1 Fitness Turns fitness sorting on User Change operator or or off password Turns authentication off Prog Save load delete programs 3 BRF1 Turns on and off the Banknote Recycling Framework process System Configuration or Version information Facing the notes Batch totals Orientation of the notes Details of count Issue Issue splitting of the Det Switching on off notes detectors and adjusting detector sensitivity Piece counting paper Clear information 8 Currency Selecting a currency Start Stop Manual start stop key Denom Selecting a Function keys Selecting functions from denomination the display Note Once in the BRF process no other processes can be selected You must have BRF switched off to run the other processes 3 Powering up the Machine Connect the mains lead to the socket on the rear of the machine Plug the machine s power lead into a mains socket and switch on the mains supply Switch on the machine s on off switch The machine will power up and complete a self test routine while the Nvision logo is being displayed This may take about 20 seconds At this time the lights on each stacker pocket will flash from red to green Next select operator or
3. e FIT notes from stacker pocket 1 and the UNFIT notes from stacker pocket 2 AUTO ADD CULLS automatically adds the notes from the CULL display on a Solid Green light Quick User Guide alaris A former De La Rue company 6 Front Note Path Access V Stacker 2 release latches Location posts slots Fig 2 Fig 1 To gain access to the note path at the front of the machine un clip the left and right hand side latches on the underside of stacker pocket 2 Fig 1 Now pull the stacker assembly slowly out towards you It will rest on top of stacker pocket 1 Fig 2 Note diverter Fig 3 You now have access to the note path belts sensors diverter and rollers Fig 3 If you have to remove a note that is stuck behind the diverter you will also have to lower the moveable plate at the rear of the machine Then hand wind the belts backwards and remove the note from the rear To return the stacker assembly back into position carefully lift it up and make sure you locate the stacker assembly slots onto the two posts on each side of the machine Then gently push it back in until you hear it click and lock into position Fig 2 8 BRF1 Virtual Pocket Process Below are typical count display shots for a solid red or flashing red indicator light STACKER 1 SOLID GREEN STACKER 2 SOLID OR FLASHING RED 2 Remove the FIT notes from stacker 1 Remove the UNFIT and suspect notes from stacker 2 1 If after feeding notes and a
4. mation on all the different process and functions selections see sections 4 and 5 of the Nvision User Guide Note For display messages and error codes See section 8 Display Messages and Error Codes on page 65 of the Nvision User Guide Page 1 of 2 Talaris House Crockford Lane Chineham Business Park Basingstoke Hampshire RG24 8QZ England Telephone 44 0 1256 368000 Fax 44 0 1256 368001 www talaris com Model Nvision Virtual Pocket Processing 5 Rear Note Path Access Moveable Plate release latches Transport path Fig 2 Feed guide assembly Fig 1 Fig 3 First remove the rear cover to gain access to the rear note path Carefully press in both of the green moveable plate latches and slowly pull the assembly back towards you Fig 1 and Fig 2 Care point You should always support this assembly as you lower it due to its weight You now have access to any notes which may have got stuck in the rear transport path If the notes are stuck between the feed rollers and the feed guide release the green feed guide clip and the feed guide will pivot down Fig 3 After the notes have been removed re secure the feed guide with the green clip and lift and lock the moveable plate back into place using the green latches Please make sure both latches are secure 7 BRF Sorting Banknote Recycling Framework Place a bundle of single or mixed denomination notes on the feed hopper the machine will start coun
5. reen moveable plate latches and slowly pull the assembly back towards you Fig 1 Care point You should always support this assembly as you lower it due to its weight Next release the green feed guide clip and the feed guide will pivot down Fig 2 Now you can pull the feed gap adjuster nut towards the centre of the machine and rotate the nut in the required direction Fig 3 The feed gap number selected must have the white arrow pointing towards it The default setting for the note feed gap is 3 New or mint notes may require a slightly smaller gap to count than average notes i e 2 Old notes may require a slightly larger gap than average notes i e 4 The higher the setting i e 4 the larger the gap Adjust then re check the feed 4 Stacker Pocket Indicator Lights The stacker pocket indicator lights by the side of each stacker pocket will tell you what type of event has happened in each pocket A solid green light is for a correct and authenticated count stacker 1 It can also apply to stacker 2 depending on the process you are using A flashing green indicates an authenticated count but has a note of the wrong denominational value in that count Not applicable in the BRF Process A solid red light is for an un recognisable note or is for an invalid count A flashing red light indicates a note that has failed an authentication check stacker 2 Note For further infor
6. supervisor mode by using the scroll key then enter your password if set or press OK F1 to go to the count display The machine will then automatically be configured to the operating settings that were previously saved for that user Note If the display comes up with a warning check that the metal tab on the top left hand side of the rear cover has activated the safety switch correctly See section 2 2 Machine Overview Rear View on page 4 of the Nvision User Guide TP10613010 Rev 02 Quick User Guide This Quick User Guide explains the more frequently used features of the Nvision note sorter However the features available will vary depending on the machine type and the detector packages fitted Features that are only available on specific models will be identified with a number added to the feature name these are explained on page 2 of this guide Copyright 2009 by Talaris Ltd Basingstoke UK alaris A former De La Rue company 2 Feed Gap Adjustment Moveable Plate release Pull back and rotate latches Fig 1 Feed guide release clip Fig 2 Feed gap adjustment is required for the following reasons e The counting of new or mint condition notes e The counting thin or poor condition notes e The counting of average condition notes The adjuster nut is graduated with numbers Remove the rear cover to adjust the feed gap on the machine Carefully press in both of the g
7. t and authenticate the notes It will also separate the BRF FIT notes into stacker pocket 1 and UNFIT genuine notes suspect counterfeit notes and unrecognised banknotes into stacker pocket 2 If stacker pocket 2 only contains unfit genuine notes the indicator light will be a solid green Refer to section 9 If a suspect counterfeit note is in with unfit notes in stacker pocket 2 the indicator light will flash red Refer to section 8 If a unrecognised note is in with the unfit notes in stacker pocket 2 the indicator light will be a solid red Refer to section 8 ee eae eee eee 2 Soidgreen onune unirnos vs 2 soare Contains unrecognised noie no 2 Flashing red Suspect counterietnote No Sod green Genuine and fitnote ys Sod green Genuine unfit note afer Spit Yes Solid red Transport error re feed No notes Post processing of notes in stacker 2 To find out why the notes were rejected to stacker pocket 2 refer to section 3 2 1 stacker pocket indicator lights in the user guide 9 BRF Virtual Pocket Process Below are typical count display shots for solid green indication light on stacker 2 STACKER 1 SOLID GREEN STACKER 2 SOLID GREEN 2 The operator can now CONTINUE the count REMOVE stacker 2 notes from the total or END that current batch If END is pressed the display will show READY FOR NEW BATCH 1 If after feeding the notes and a solid green light is shown on stacker 1 amp 2 Remove th
Download Pdf Manuals
Related Search