Home

Owners Manual

1. lt EVRIS HIDE Introduction With undisputed expertise in the reproduction of sound Tannoy maintains its strong position in the residential and professional markets through constant development of its core technologies The company s patented Dual Concentric point source constant directivity wide dispersion drive unit has been consistently reassessed and updated to incorporate the very latest materials and acoustic developments Over recent years Tannoy has been at the forefront of developing loudspeakers with extended bandwidth performance resulting in a range of speakers that provide enhanced reproduction With upper frequencies in excess of 50kHz Tannoy WideBand speakers deliver an increased immediacy airiness and impact making music sound more natural and true to life Tannoy s highly experienced engineering team have integrated into their active loudspeaker designs leading edge digital and electronic technologies in the form of digital sound processors The amalgamation of these core strengths has led to the development of Tannoy iDP Interactive Digital Programming Technology and its first application in the Eyris loudspeaker range An Eyris iDP home theatre speaker system offers perfect matching to the listening environment through its built in room equalisation capability As a 5 1 A V system this would comprise five fully active loudspeakers and a subwoofer each containing powerful amplification and digital sound pr
2. TANNOY lt YRIS HDE Owners Manual lt YRIS HIDE CD Go G 00 Go N IN NS IN N N Or O Go N O SO SO CO NY ON A ON O Aj GO 3 A Go GO QO G WO OO eol IN Important Safety Instructions Quick Set Up Guide Introduction Eyris iDP System Installation IMPORTANT Concept amp Design Philosophy Unpacking Visual Checks Speaker Placement Master amp Slave Concept Rear Panel Description Operational Overview IDP Display amp Setup Procedure Set Ups Set Up When The Loudspeakers are connected Parameter Description Bass Management Set Up Menu Parameters Available for Eyris 3 iDP amp Eyris DCC iDP Parameters Available for TS212 iDP Subwoofer Parameter Categories Technical Specifications Eyris 3 iDP Technical Specifications Eyris DCC iDP Technical Specifications TS212 iDP Subwoofer Performance Data Dimensions Appendix IDP Display Messages System Delays Preset List IDP Cables Declaration of Conformity Warranty lt EVRIS DP IMPORTANT SAFETY INSTRUCTIONS The lightning flash with an arrowhead symbol within an The exclamation point within an equilateral triangle is equilateral triangle is intended to alert the user to the intended to alert the user to the presence of important presence of uninsulated dangerous voltage within the operating and maintenance servicing
3. oy ds MO CARD ov s 24 MASTER MASTER MASTER C System Ch RJ 45 cable Signal Cable SLAVE i e ALL MASTERS REQUIRE OPTIONAL DIGITAL I O CARD e ALL AUDIO CONNECTIONS TO THE DIGITAL I O CARD 6 1 DIGITAL 192 kHz Channels RIRs I O CARD 2 Ja ay mi MASTER RJ 45 cable Signd Cable SLAVE ALL MASTERS REQUIRE OPTIONAL DIGITAL I O CARD ALL AUDIO CONNECTIONS TO THE DIGITAL I O CARD DP EYRIS HIDE 7 1 ANALOG Channels 1 15 R tpe iboe AZ MASTER MASTER MASTER L C st s System Ctrl MASTER a4 RJ 45 cable Signal cae RS Connecting 2 Subs SLAVE RS 7 1 DIGITAL AES SIGNAL Channels LIT I O CARD y 2 2 2 MASTER MASTER EN ca Ctrl re gt C SUB SLAVE anni RJ 45 cable A ALL MASTER MONITORS REQUIRE INSTALLED DIGITAL je VO CARDS CONNECT AUDIO TO THE I O CARDS DIGITAL IN 2 CONNECTION TOP XLR Connecting 3 Subs System Ctrl SLAVE SLAVE SLAVE i L SUB C SUB sus i SLAVE SLAVE i L LS RS 7 1 DIGITAL 192 kHz Channels T E MO CARD k T oy e oy js MASTER MASTER MASTER L C E E System Ctl yo it H I MASTER MESE a a ad evssoneese RJ 45 ccble Signal cate RS e ALL MASTERS REQUIRE OPTIONAL DIGITAL I O CARD e ALL AUDIO CONNECTIONS TO THE DIGITAL VO CARD 5 1 DIG 6 MASTER AES SIGNAL C SUB i anna RJ 45 cable i Sgnal Cable SLAVE SLAVE
4. Controller by leaving I O CARD 4 q u akta out the TC Link button on the rear panel EX K The Centre speaker receives audio for both centre amp LFE channels J S via the AES input connectors input 2 for Centre amp input 3 for Sub The LFE subwoofer is fed via the RJ 45 connection from the left speaker oo RJ45 Network connections from the Centre speaker to the Left amp Right speakers are required The Left speaker receives audio for both Left amp LS channels via the AES input connector input 2 for Left amp input 3 for LS s The LS speaker is fed via the RJ 45 connection from the Left monitor The CS speaker is fed via the RJ 45 connector from the LS speaker Audio for the CS speaker is fed to input 2 NB Sth Masters menune omonat Dinrar vo caso The Right speaker receives audio for both Right amp RS channels via the AES input connector input 2 for Left amp input 3 for RS The RS speaker is fed via the RJ 45 connection from the Left speaker Clock MUST be sent on the AES connection feeding the Centre LFE channels or on BNC When no Bass management is selected only the LFE signal will be sent to the subwoofer When Bass managemert is selected low frequency content from the 5 main channels is extracted and sent to the subwoofer where it is summed with the LFE channel Only LF Centre RF LS and RS contribute to the bass management signal Control system AMX Crestron etc or PC
5. Please confirm current specifications for critical applications with your supplier EVRIS DP Tannoy Loudspeakers are designed and manufactured in Great Britain by Tannoy Ltd Rosehall Industrial Estate Coatbridge North Lanarkshire ML5 4TF SCOTLAND Telephone 44 0 1236 420199 Fax 44 0 1236 428230 Tannoy North America Inc Suite 1 335 Gage Avenue Kitchener Ontario CANADA N2M 5E1 Telephone 519 745 1158 Fax 519 745 2364 Check periodically for the latest manual revision that will always available for download from www tannoy com The revision number of this manual is located below Issue 1 Software Version 1 15 Part No 6281 0397 TANNOY O GH 11 December 2003 HEAR BELIEVE
6. Select between the following reset options The Reset functions are accessed by holding the ENTER key on the System Controller while powering up Clear Speaker Settings All global and local parameters in connected loudspeakers are reset Preset and network settings are not affected Reset All Settings This is a factory reset procedure that deletes all global and local parameter settings as well as preset and network settings The following reset procedure is found in the Setup menu Clear Setup for entire network Select this reset procedure to clear all network settings 7 Select Setup You must define which type of setup you have Empty Custom Stereo Analog Stereo Digital Stereo 192kHz Surround Analog Surround Digital Surround 192kHz 5 1 dig 6 Master 8 Select Loudspeaker Tasks Select first loudspeaker and press Enter Pink noise will be generated in one of the monitors in the setup Set Loudspeaker Tasks Choose the matching task for the position from where the pink noise is generated for example Master L Front Press Exit when complete lt EVRIS SDR Parameter Description Basic operation in all menus when navigating the menus via the LCD display Use ARROW keys to select value or submenu Use ENTER to enter menus or for confirmation and to activate Use EXIT to step to a higher level or to decline an operation Values are marked with an when they can be altered via the A
7. and sent to the subwoofer where it is summed with the LFE channel Only L Centre R LS and RS contribute to the bass management signal Control system AMX Crestron etc or PC iP can be connected to any spare TC Link out connection I REMEMBER To set a master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out position 7 1 Digital Set up 7 1 DIGITAL AES SIGNAL The diagram shows how to connect a 7 1 SDDS digital set up Channels 1715 I O CARD a 2 The Centre loudspeaker is set as the System Controller by leaving out Tec a arm the TC Link button on the rear panel Ey System Ctl RJ45 Network connections for the system should be connected Y E in the following way E i g pn Centre output to L input L output to LS input E ES Centre output to R input SL output SR input E L output Sub input R output to RS input Y SLAVE The Centre speaker receives audio for both centre LFE channels ee RJ 45 cable via the AES input connector input 2 The L speaker receives audio for both L amp LS channels via the NB FASER ER S ERLEBEN E E AES input connector input 2 DIGITAL IN 2 CONNECTION TOP XLR Sub output to SL input The SL speaker receives audio for both SL amp SR channels via the AES input connector input 2 The R speaker receives audio for both RF amp RS channels via the AES input connector
8. automatically set to 50 dB for the loudspeaker not recognized in the network as 96 kHz L Front The indicates that the loudspeaker you are looking at is the System Controller gt gt A Input Lo lt lt This message is displayed in analog setups only and indicates that the Input level has been detected to be between 60dB and 20dB for a period longer than 3 minutes This is an indication to increase the Analog Input Gain Analog Input gain range 9dBu 15dBu 21dBu or 27 dBu gt gt A Input Hi lt lt This message is displayed in analog setups only and indicates that an Input level near 0dB is detected peaks 2 sec Above 1 dB This is a warning and you should turn down the Analog input gain Analog Input gain range 9dBu 15dBu 21dBu or 27 dBu gt gt PSU error lt lt Displayed if the power supplies fails The power will be turned off and the monitor will operate Contact TANNOY Service Department lt Locked gt Displayed when a parameter is locked by the PC IP installer software and cannot be changed Parameter lock can only be unlocked with the PC IP software Standby Displayed when no Input signal has been detected for the time specified in the Utility Menu below 65 dB The Amplifier is turned off Standby mode is released as soon a signal level above 65dB has been detected gt gt Power save lt lt Displayed when no signal has been detected on all loudspeakers on the network fo
9. feeding the Centre LFE channels or on BNC When no Bass management is selected only the LFE signal will be sent to the subwooter When Bass management is selected low frequency content from the 5 main channels is extracted and sent to the subwoofer where it is summed with the LFE channel Control system AMX Crestron etc or PC iP can be connected to any spare TC Link out connection REMEMBER To set a master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out position 6 1 Analog Set up RJ 45 cable Signal Cable The diagram shows how to connect a 6 1 analog set up The Centre speaker is set as the System Controller by leaving out 6 1 ANALOG the TC Link button on the rear panel _6 1 ANALOG The Centre speaker receives audio for both centre input 1 amp LFE Channels en NE channels input 2 via the analog input connectors The LFE ot te hr subwoofer is fed via the RJ 45 connection from the left speaker MASTER MASTER MASTER RJ45 Network connections from the Centre speaker to the Left amp ur ES 1 Right speakers are required The Left speaker receives audio for both Left input 1 amp LS channels input 2 via the analog input connectors The LS speaker x siave is fed via the RJ 45 connection from the Left speaker C SUB The CS loudspeaker is fed via the RJ 45 connector from the LS loud a RJ 4S cable speaker A
10. give you a good stereo image To get best results from your new Tannoy Eyris iDP loudspeakers it is worthwhile spending a little time finding the optimum set up configuration Begin by angling the speakers towards your chosen listening position usually this is on the centre line of the room so that when seated you can just see the inner side panel of each speaker The front of the loudspeaker should not be obstructed in any way The loudspeakers should be located between 1 5 to 4 5 metres 5ft to 15ft apart with the listening position set slightly further away than the speakers are apart Avoid positioning the loudspeakers in corners of the room as this will have a negative effect on performance With the speaker in its listening position rock the loudspeaker gently from side to side so that the spikes find their way through the weave of the carpet and on to the solid surface below Once fine adjustments have been made to the spikes to level the loudspeaker and ensure stability tighten the lock nuts firmly but without using undue force lt EVRIS HIDE Master amp Slave Concept Two types of hardware exist for each Eyris DC3 iDP with the exception of the DCC iDP Master only and the TS212 iDP subwoofer Slave only Master A Master unit is able to Receive digital audio on AES EBU connections two channels Receive analog audio two channels Send and receive audio and control data via the proprietory
11. input 2 When no Bass management is selected only the LFE signal will be sent to the subwoofer When Bass management is selected low frequency content from the 5 main channels is extracted and sent to the subwoofer where it is summed with the LFE channel Only LF Centre RF LS and RS contribute to the bass management signal Control system AMX Crestron etc or PC iP can be connected to any spare TC Link out connection REMEMBER To set a master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out position lt EVRIS HIDE 7 1 Digital 192kHz Set up The diagram shows how to connect a 7 1 192kHz set up 5 1 Dig 6 Master The Centre loudspeaker is set as the System Controller by leaving out 7 1 DIGITAL 192 kHz the TC Link button on the rear panel RJ45 Network connections for the system should be connected in the war alle alts sj following way MASTER MASTER MASTER Centre output to L input Centre output to R input L output Sub input ay ye Sub output to SL input MASTER x u SLAVE L output to LS input al ES SL output SR input R output to RS input y The Centre speaker receives audio for both centre amp LFE channels o Wi ona coro SLAVE via the AES input connectors input 2 for Centre amp input 3 for Sub Mo Signal Coble US The L speaker receives audio for both L amp LS channels via the AES inpu
12. instructions in the product s enclosure that may be of sufficient magnitude literature accompanying the product to constitute a risk of electric shock to persons Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over NO 00 Y O 01 N 13 Unplug this apparatus du
13. nz ie Hot Cable type 110 Ohm Pin3 gt Pin3 Cold Connector type XLR Serial to Cat 5 cable This cable is included with PC IP This is a proprietary cable with integral Electronics For use with IDP Systems only USB to COM 9pin This cable is NOT included with PC IP Use this type of converter along with the Cat5 to Serial cable described above if your computer has a USB connection only and no serial port lt EVRIS HIDE Declaration Of Conformity C Details of the Apparatus The following apparatus is are manufactured in the United Kingdom by Tannoy Ltd of Rosehall Industrial estate Coatbridge Scotland ML5 4TF and TC Electronic A S Sindalsvej 34 8240 Risskov Denmark The following equipment is marked with the CE label and conform s to the protection requirements of the European Electromagnetic Compatibility Standards and Directives The apparatus is designed and constructed such that electromagnetic disturbances generated do not exceed levels allowing radio and telecommunications equipment and other apparatus to operate as intended and the apparatus has an adequate level of intrinsic immunity to electromagnetic disturbance to enable operation as specified and intended Eyris 3 iDP Eyris DCC TS212 iDP The equipment listed above is covered by this certificate and marked with the CE label contorms with following standards EN 60065 IEC 60065 EN 55103 EN 55020 EN 61000 3 2
14. position gt lt EVRIS HIDE 5 1 Analog Set up The diagram shows how to connect a 5 1 analog set up The Centre loudspeaker is set as the System Controller by leaving out the TC Link button on the rear panel The Centre loudspeaker receives audio for both centre input 1 amp Channels LFE channels input 2 via the analog input connectors The LFE yr e ihe subwoofer is fed via the RJ 45 connection from the left loudspeaker P aFRJ45 Network connections from the Centre speakers to the Left amp EN US Right speakers are required O The Left speaker receives audio for both Left input 1 amp LS nn channels input 2 via the analog input connectors The LS loudspeaker is fed via the RJ 45 connection from the Left speaker The Right speaker receives audio for both Right input 1 amp RS channels input 2 via the analog input connectors The RS speaker _ kona Cable is fed via the RJ 45 connection from the Right speaker vo E 9 When no Bass management is selected only the LFE signal will be L OS e de sent to the subwoofer o When Bass management is selected low frequency content from the 5 main channels is extracted and sent to the subwoofer where it is summed with the LFE channel 9 Control system AMX Crestron etc or PC IP can be connected to any spare TC Link out connection REMEMBER To set a master loudspeaker as the system controller the TC Link butto
15. select 1500 W PWM amp 96 kHz except when slaved to digital input or Word clock Input 96 88 2 64 48 44 1 or 32 kHz optional 192kHz 2 x RJ45 proprietary TC LINK gt 113 dB typ unweighted BW 20 20kHz lt 105 dB typ O 1 kHz 3 dBFS lt 120 dB 20 Hz to 20 kHz 24 bit Dual bit delta sigma sampling at 4 1 5 6 6 1 6 1 MHz EVRIS HIDE Performance Data 1m on axis Ok 40k m Hz Eyris 3 DP Anechoic Frequency Response Im dB 1m on axis E l BEL ee ID A E U T T Ok 40k Id Hz Eyris DCC Anechoic Frequency Response Im DDC iDP e Uy a TM HNOLOGY EN RIS Cre Ne Er a 240 0 _ w lt 196 0 m I 600 0 253 5 E3 IDPY i 1022 5 I 51 0 240 0 Dimensions EVRIS HIDE Y 3 O J a a N NO U Q gt U us Q gt UN N o Ne A 498 0 L J LJ L J L J 490 0 520 0 lt YRIS HIDE iDP Display Messages The following is an explanation of Error Messages etc may appear on a Master loudspeaker Display I as 96 kHz Centre The indicates that the loudspeaker is not connected to the network The volume is then
16. Band SuperTweeter Continuing the frequency response to 50kHz the pod mounted SuperTweeter uses a specially developed dome with a rare earth magnet The SuperTweeter is time aligned to the Dual Concentric over a wide horizontal dispersion using custom DSP generated filters The crossover frequency is very high at 20kHz well away from the mid frequency band where sensitive stereo location information is concentrated Listening at 1 meter on axis with the high frequency horn the precise point where the signals synchronize the SuperTweeter is undetectable as a separate source High efficiency compact Switched Mode Power Supply SMPS For saving on power consumption and to insure optimal performance disregarding the quality of the mains voltage the unit is equipped with a high efficiency compact Switched Mode Power Supply SMPS Using switched technology both in amplifiers and power supply can reduces the heatsink size to about one third the size it would be with a regular power supply and class AB amplifiers lt EVRIS HIDE Unpacking amp Visual Checks To unpack the loudspeakers from their boxes remove tape from the top then fold the flaps right back before inverting the carton and contents Lift the carton clear of the contents then remove all inner packaging lt is strongly recommended that you store all the packaging to allow protected transportation in future WARNING WHEN UPACKING THE EYRIS iDP MODELS NOTE THAT T
17. C Sur L SUB R SUB L Choin R Chain L Inner R Inner 175212 IDP Pink Noise Off On Calib 0 0dB Rel Lev 5 0dB LFE LP On Off LFE Gain O to 14dB Polarity 0 180deg Phase 0 180deg Eyris E3 DP amp Eyris DCC iDP Pink Noise OF On Calib 0 0dB Rel Lev 5 0dB Position Neutral press Wall ENTER Corner Bass 0 0dB Treble 0 0dB lt EVRIS HIDE iDP Display amp Set Up Procedure lt ENTER gt key lt CURSOR UP DOWN gt keys The ENTER key has two main functions These keys are used for navigating and adjusting e To enter the menus currently displayed parameter values e To set the displayed parameter in Edit mode When a parameter can be edited via the CURSOR keys a The previous page illustrates how to navigate through x is set as the first character in front of the parameter parameters using the DP display lt EXIT key gt The EXIT key is used to exit the current display and go to previous menu level Setting up Introduction To make your setup operate as intended correct cabling is essential Choose one of the described setups and connect exactly as illustrated The following section is a Quick guide to get your system up and running Setup including Subwoofer To activate the subwoofer please choose an appropriate X over frequency in the Bass Management menu lt EVRIS HIDE Set ups General Set up Procedure Decide which Set up you are going to build Connect the Eyri
18. EN 61000 3 3 Signed Position Date Safety requirements for mains operated electronic and related apparatus for household and similar general use Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment Sound and television broadcast receivers and associated equipment Immunity characteristics Limits and methods of measurement Limits for harmonic current emissions equipment input current lt 16A per phase Limitation of voltage fluctuations and flicker in low voltage supply systems for equipment with rated current lt 16A Z Engineering Director Professionol Products Tannoy Professional 23 11 2003 For Tannoy Ltd lt YRIS HIDE Warranty No maintenance of the Eyris iDP Loudspeakers is necessary All components are guaranteed for a period of one year from the date of manufacture subject to the absence of or evidence of misuse overload or accidental damage For further information please contact your dealer or the distributor in your country If you cannot locate your distributor please contact Customer Services Tannoy Ltd Coatbridge Strathclyde ML5 4TF T 44 0 1236 420199 F 44 0 1236 428230 DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUS AUTHORISATION This warranty in no way affects your statutory rights Our policy commits us to incorporating improvements to our products through continuous research and development
19. F Separate 600 PWM amp Tweeter amp SuperTweeter 300 PWM amp 96 96 88 2 64 48 44 1 or 32 kHz optional 192kHz XLR 2 channels AES EBU in 3 x RJ45 proprietary TC LINK AES EBU 24 bit BNC 750 0 6 to 10 Vpp 2 x 16 character dot matrix Menu system four buttons XLR balanced pin 2 pin 3 10 3 k Balanced unbalanced 9 15 21 27 dBu gt 113 dB typ unweighted BW 20 20kHz lt 105 dB typ O 1 kHz 3 dBFS lt 120 dB 20 Hz to 20 kHz 24 bit Dual bit delta sigma sampling at 4 1 5 6 6 1 6 1 MHz 2 x RJ45 proprietary TC LINK lt EVRIS HIDE Technical Specifications TS212 iDP Subwoofer amp iDP Remote System System TS212 DP Frequency Response Max SPL 1m Crossover Frequency Drive units Cabinet Volume LF Alignment Dimensions H x W x D Cabinet Construction Total weight Electronic System Mains Voltage Power Consumption Amplifier System Sample Rates Internal External Digital Section Master only I O connectors Dynamic Range THD N Cross talk A to D Conversion Active Subwoofer 25Hz 150Hz 3dB 124dB continuous Set in Bass Management DSP Generated 2 x 300mm 12 Aluminium Cone 45 Litres Infinite baffle 520mm x 471mm x 497mm 20 2 x 185 8 x 195 8 Gray suede paint finish on top with silver insert Black Fabric on sides MDF Black anodised aluminium back plate 51kg 112 2lbs 100 to 240Vac 50 60Hz auto
20. HE SuperTweeter IS MOUNTED IN THE EXTRUSION ON TOP OF THE CABINET TAKE CARE NOT TO TOUCH THE TWEETER DOME ITSELF AS IRREPARABLE DAMAGE WILL OCCUR PROTECTIVE TWEETER GRILLES ARE FACTORY FITTED TO PROTECT THE DELICATE DOME THEY ARE HELD IN PLACE BY MAGNETISM WITH AN ADDITIONAL CARD RETAINER SECURING THIS MESH GRILLE IN PLACE DURING TRANSIT PLEASE REMOVE THIS CARD DURING THE INSTALLATION PROCESS FLOOR STANDING MODELS The metal plinth designed to extend the footprint of the E3 iDP to aid stability and provide an efficient acoustic coupling with the floor are in a separately packed accessory kit To fit these lay the speaker down gently on its back and align the four holes of the plinth in a metal foot the threaded inserts located in the base of the E3 iDP Insert the bolt supplied noting the correct positioning of the two washers and tighten firmly ensuring there is no unwanted movement Eyris iDP floor standing models perform best with carpet piercing spikes fitted These are supplied along with lock nuts and should be inserted into the threaded holes in the base of the metal plinth Level the speaker and then tighten the lock nuts firmly but without using undue force Spike locating cups are provided in the accessory pack and these may be used to protect sensitive floor surfaces lt EVRIS HIDE Speaker Placement Where do you aim the speakers to give you the smoothest and most consistent sound How far apart do you place them to
21. RROW keys Main Display The Main Display indicates the position of the loudspeaker when set up and the set volume for the loudspeaker A symbol indicates that this specific Master Unit has been set up to act as System Controller Bass Management Bass management is possible in Standard Stereo with 1 Sub Standard Stereo with 2 Subs All surround modes The Eyris iDP loudspeakers utilize 2nd order Hi Pass filters to attenuate frequencies below the set crossover frequency The TS212 iDP Subwoofer utilises 4th order Low Pass filter to attenuate frequencies above the set crossover frequency Press ENTER to access the Select Mode Off Bass Management is not activated Only the LFE channel is distributed to the Sub Available Crossover Frequencies Menu Name Eyris Filter Sub AN Order Sub 2nd Order LFE Sub X Over 50 Hz 50Hz 50Hz 50Hz X Over 80 Hz 80Hz 80Hz 80Hz No Extension 50 Hz Off 50Hz 50Hz Extension 80 Hz Off 80Hz 80Hz THX S m 80 Hz 80Hz Off PC iP Via the DP PC iP installer package optional software for the advanced installer an advanced Bass Management mode Is available In this mode a greater number of frequencies can be chosen and all filters Eyris HPF Sub4th order and Sub2nd order can be controlled to suit demanding amp critical setups lt EVRIS HIDE Bass Management The bass management system is designed to subtract the bass contents of all main channels and reproduce this by t
22. SDR Technical Specifications Eyris DCC iDP System Master amp Slaves System Eyris DCC iDP Frequency Response Low Frequency Alignment 6dB 37Hz Crossover Frequency Drive units Super Tweeter Dual Concentric high frequency Dual Concentric low frequency Low frequency Cabinet Volume LF Alignment Dimensions H x W x D Cabinet Construction Finish Total weight Electronic System Mains Voltage Power Consumption Amplifier System Sample Rates Internal External Digital Section Master only I O connectors Formats Word Clock Input Display Operation Analogue Section Master only Input connectors Impedance Selectable Full Scale Input level Dynamic Range THD N Cross talk A to D Conversion Slaves Only I O connector s 4 Way Semi Active Loudspeaker 43Hz 50kHz 1 5dB 250Hz Passive 1 7kHz DSP Generated 16kHz Passive 25mm 1 25 micron titanium dome neodymium magnet system 25mm 1 25 micron titanium dome neodymium magnet system 175mm 7 cast chassis shielded 175mm 7 cast chassis shielded 29 Litres Bass Reflex 278 5 x 600 x 240mm Add 51 mm to height with Plinth 11 x 235 8 x 9 16 Add 2 to height with Plinth 18mm MDF internally cross braced enclosure 30mm front baffle Sycamore American Walnut or Black Ash 26 5kg 58 31 Ibs 100 to 240Vac 50 60Hz auto select 45W s Full Power IEC 60065 LF amp LL
23. TC LINK connection Master Loudspeaker To Set a Master Loudspeaker as the System Controller the TC LINK button on the rear panel must be left in the out position Only one of the Master units must be setup as the System Controller This is achieved by leaving out the TC LINK button on the rear panel See below Setting up a system is carried out from the System Controller monitor unless you have the PC iP programme this includes set up task setting and calibration of all connected loudspeakers The Master unit distributes Audio and control data to the respective Slave units connected System Controller Master or Slave To set up a Master unit to be either System Controller or Master Slave the LINK button on the rear panel must be set up correctly Out The loudspeaker operates as a System Controller In The loudspeaker operates as either a regular Master with digital or analog Inputs are or as a Slave unit Inputs amp Outputs The Master unit contains AES EBU and Analog Input connectors and three Link connectors carrying both audio and control data to connected Slave units Connectors 1 x AES EBU XLR 2 x Analog inputs 2 x Link RJ45 connectors 1 x Link Input RJ45 connector 1 x Word Clock BNC sync OUT 2 OR REMOTE OUT 4 OR REMOTE Master Monitor Network Connections Option slot The analog input module can be removed and replaced with an AES Digital Input card giving the option of sending all six
24. cess sub menus Setup Press ENTER to access select mode Select mode is indicated by Press ENTER to confirm choice k Empty Custom Stereo Analog Stereo Digital Stereo 192kHz Surround Analog Surround Digital Surround 192kHz 5 1 dig 6 Master Set Loudspeaker Task For the System Controller Master loudspeaker to identify and operate all loudspeakers in the setup each loudspeaker must be given one of the following tasks indicating function and position No Task L SUB L Front R SUB R Front LS Chain Centre RS Chain C SUB L Inner L Sur R Inner R Sur C Sur Press ENTER to access task options Use ARROW keys to select task Press ENTER to confirm selected task External Clock Press ENTER to access sub menus BNC Sync On The loudspeaker attempts to lock on the Word Clock BNC BNC Sync Off The loudspeaker will attempt to lock on the AES Input Calibrate Loudspeaker Press ENTER Select loudspeaker to calibrate using the ARROW keys Press ENTER lt EVRIS HIDE Parameters available for Eyris E3 iDP and Eyris DCC iDP Pink Noise Calibrate Rel Lev Room Position Bass Treble On Off Level calibration of the selected loudspeaker Range dB to 6dB Relative preset volume for the selected loudspeaker relative to the calibrated and global volume Range 40dB to OdB Neutral Wall Corner Bass adjustment for the selected monitor Range dB to dB Treble adjust
25. channels in a 5 1 setup to one single Master monitor From there the signal is distributed to 4 slave loudspeakers and Sub via the TC LINK RJ 45 connections creating a fully digital 5 1 setup The AES Digital input card is also required for other digital surround setups See the Setups section of this manual lt EVRIS HIDE Slave Loudspeaker amp TS212 iDP Subwoofer The slave unit is able receives and distributes audio and control data via the proprietary TC LINK connection The Slave and Sub units contain one RJ45 Input connector and one Link connector Via the RJ45 input connector the Slave unit is supplied with audio and control data from the Master unit Audio signal from the source is fed to the master loudspeaker only and the signal is distributed to the connected slave units through a proprietary networking protocol A master loudspeaker acts exactly the same as a Slave loudspeaker when its TC Link button is set to the IN position hence it is used for audio inputs only gr The network system enables all connected loudspeakers in a setup whether in a stereo or surround format always to be corresponding Control of the entire system is possible from one point on the network Master or Slave providing great flexibility in terms of control OUT 4 OR REMOTE Slave Monitor Network Connections Initializing the Network After connecting the units and powering up for the first time the Master unit scans the setup i
26. d OOOO EMC This equipment has been tested and found to comply with the limits for a Class B Digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in residential installations This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on The user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Caution You are cautioned that any change or modifications not expressly approved in this manual could void your authority to operate this equipment For the customers in Canada This Class B Digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations ICES 003 Cet appareil num rique de la classe B respecte toutes les exigences du Reg
27. d with the LFE channel Control system AMX Crestron etc or PC iP can be connected to any spare TC Link out connection I REMEMBER To set a master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out position lt YRIS HIDE 5 1 Digital 192kHz Set up The diagram shows how to connect a 5 1 digital set up at 192khz All Master loudspeakers require installed digital MO cards AES signal is fed to inputs 2 amp 3 of these cards 5 1 DIGITAL 192 kHz The Centre speaker is set as the System Controller by leaving Gnana a out the TC Link button on the rear panel Jocar 2 2 ts The Centre speaker receives audio for both centre amp LFE channels via the AES input connectors input 2 for Centre amp input 3 for Sub The LFE subwoofer is fed via the RJ 45 connection from the left speaker slave RJ45 Network connections from the Centre speaker to the Left amp Right speakers are required The Left speaker receives audio for both Left amp LS channels via the E AES input connector input 2 for Left amp input 3 for LS The LS E I speaker is fed via the RJ 45 connection from the Left speaker ES The Right speaker receives audio for both Right amp RS channels via the AES input connector input 2 for Left amp input 3 for RS The RS ET speaker is fed via the RJ 45 connection from the Left speaker y Clock MUST be sent on the AES connection
28. er as the system controller the TC Link button on the rear panel MUST be in the out position Connecting Three Subs Three subs can be connected to any of the above Set Ups When no Bass management is selected no signal will be sent to the subwoofers When Bass management is selected low frequency content from the left channel is extracted and sent to the left subwoofer Low frequency content from the right channel is extracted and sent to the right subwoofer Low frequency content from the centre channel is extracted and sent to the centre subwoofer System Cr Control system AMX Crestron etc or PC iP can be connected to E y y v i SLAVE SLAVE SLAVE i any spare TC Link out connection _ SLAVE SLAVE REMEMBER To set a master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out position Ls RS lt lt EVRIS HIDE SETUP when the loudspeakers are connected The following is a simple operational setup guide which is carried out after the loudspeakers are connected The assumption is made that you will be navigating the menus via the LCD display on the master loudspeaker If you are using the PC IP advanced installers package then refer to the user manual included with this package 1 Connect the loudspeakers The loudspeakers must be connected exactly as shown in the previous illustrated set up diagrams Turn on the pow
29. er on each loudspeaker Set one loudspeaker as the System Controller Only one master loudspeaker in the network can be set as the System Controller Refer to the setup diagrams to determine which loudspeaker this should be To set the master loudspeaker as the system controller make sure the TC LINK button on the rear panel is in the out position All other master loudspeakers in the setup must be set to operate as slaves this is done by pressing the TC Link button to the in position If you are changing the operational mode of the loudspeaker you will be asked to confirm Mode changed set as slave or Mode changed set as sys Controller Confirm by pressing the Enter key on the Master Display The gain setting is the first item in the main menu The default setting in the main menu after switching on menu is 50dB You may have to increase this value slightly in order to hear the pink noise when setting the monitor tasks see 8 Setting Bass Management The next item in the main menu is Bass Management Select the required Mode Off X over 50Hz X over 80Hz X over Ext 50Hz X over Ext 80Hz X over THX 80Hz In stereo setups with subwoofers the subs will only operate when the Bass Management is activated Set up Menu Go to Setup Menu and press Enter lt YRIS HIDE 6 Reset Procedure Three different levels of Reset exist For the three Reset levels all connected loudspeakers will be affected
30. he use of a subwoofer IDP systems provide a number of possible crossover frequencies that can be determined by the user Important iDP parameters to consider when using Bass Management LFE Low Pass Filter Switches on off a very steep 7th order low pass filter at 120 Hz LFE Gain Range 6 to 8dB The LFE channel can be boosted or cut using this parameter Polarity Range O or 180 If the Subwoofer is correctly placed setting the Polarity parameter at 180 should result in a full Phase cancellation at the set cross over frequency If this is not the case the Phase parameter described below should be adjusted Phase Range O to 180 Phase Introduction The integration of the TS212 IDP subwoofer with the Eyris IDP loudspeakers requires on site tuning for best results Apart from level calibration and choosing a Bass Management Crossover X over frequency the issue of phase alignment remains For this purpose the TS212 subwoofer has a 0 180 degree phase adjustment in 5 degree steps and a Phase Reverse function The optimal setting of these parameters will depend on several factors 1 Room acoustics 2 Placement of monitors and listening position 3 Choice of crossover frequency Phase settings are automatically saved and linked to the currently selected Crossover frequency Phase settings are Global settings and are therefore are not saved with individual presets lt EVRIS SDR Setup Menu Press ENTER to ac
31. iP can be connected to any spare TC Link out connection REMEMBER To set a master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out position sassanasan RJ 45 cable Signal Cable lt YRIS HIDE 7 1 Analog Set up The diagram shows how to connect a 7 1 SDDS analog set up The Centre speaker is set as the System Controller by leaving 7 1 ANALOG out the TC Link button on the rear panel Channels 0 5 m RJ45 Network connections for the system should be connected bdo abide me in the following way MASTER MASTER MASTER Centre output to L input Centre output to R input e alba T L output Sub input en ai hg L output to LS input SL output SR input R output to RS input L The Centre speaker receives audio for both centre input 1 8 M o RJ AS cable LFE channels input 2 via the analog input connectors Sa e The L speaker receives audio for both LF input 1 amp LS channels input 2 via the analog input connectors The SL speaker receives audio for both SL input 1 amp SR channels input 2 via the analog input connectors The R speaker receives audio for both R input 1 amp RS channels input 2 via the analog input connectors When no Bass management is selected only the LFE signal will be sent to the subwoofer When Bass management is selected low frequency content from the 5 main channels is extracted
32. io for the Left and Right channels are connected to the speakers eee PO Digital IN No 2 connection on the MO card Bund Carle Audio for the LS and RS channels are connected to the speakers Digital IN No 3connection on the 1 0 card RJ45 Network connections from the Centre speaker to the Left LS amp subwoofer are required Network connections from the Left to Right and LS to RS are required When no Bass management is selected only the LFE signal will be sent to the subwoofer When Bass management is selected low frequency content from the 5 main channels is extracted and sent to the subwoofer where it is summed with the LFE channel Control system AMX Crestron etc or PC iP can be connected to any spare TC Link out connection REMEMBER To set a master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out position lt YRIS HIDE Connecting Two Subs Two Subs con be connected to any of the above Set Ups When no Bass management is selected no signal will be sent to the subwoofers Connecting When Bass management is selected low frequency content from the 2 Subs left channel is extracted and sent to the left subwoofer Low frequency content from the right channel is extracted and sent to the right subwoofer Control system AMX Crestron etc or PC iP can be connected to any spare TC Link out connection REMEMBER To set a master loudspeak
33. lement sur le mat riel brouilleur du Canada This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada lt YRIS HIDE QUICK SETUP GUIDE Below is a quick guide on how to connect different variations of setups Connections must be made exactly as illustrated Detailed descriptions of the setups can be found on pages 16 23 Channels E Channels L E n y p ub pe MASTER L L System Ctrl System Ctrl RJ 45 cable Signal ce BE 120 w RJ 45 cable Signal Cable AES SIGNAL Channels RIRS Channels yyer A LAA yocar ya MASTER MASTER ce c gt e Fe System Ctl i i System Ctrl i RJ 45 cable signal Ccble RJ 45 cable i SLAVE i Signd Cable i i E ALL MASTER MONITORS REQUIRE INSTALLED DIGITAL N B VO CARDS CONNECT AUDIO TO THE I O CARDS DIGITAL IN 2 CONNECTION TOP XLR 6 1 ANALOG Channels Ris ipe i r ie AES SIGNAL Channels MO CARD MASTER MASTER System Ch i SLAVE i C SUB i RJ 45 cable Signal Cable RJ 45 cable u SLAVE MASTER sIavE u u N l es u s 3 l u ALL MASTER MONITORS REQUIRE INSTALLED DIGITAL N B VO CARDS CONNECT AUDIO TO THE I O CARDS gt DIGITAL IN 2 CONNECTION TOP XLR Channels AES SIGNAL DIGITAL IN MASTER RJ 45 cable Signal Cable 5 1 DIGITAL O 192 kHz Channels RIRS
34. ls via the analog input connectors The Right loudspeaker and Sub receive audio and control 5 via the output RJ45 TC Link connections on the Left system controller loudspeaker animki RJ 45 cable When no Bass management is selected no signal nee will be sent to the subwoofer When Bass management is selected low frequency content from the left and right channels is extracted and sent to the subwoofer Control system AMX Crestron etc or PC iP can be connected to any spare TC Link out connection I REMEMBER To set q master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out position lt EVRIS HIDE Analog Stereo Set up With Stereo Subs The diagram shows how to connect a stereo set up with two subwoofers The Left speaker is set as the System Controller by leaving out the TC Link button on the rear panel The Left master speaker receives both the left and right input signals Channels Z E via the analog input connectors RAL The Right speaker and Sub receive audio and control via the output Zn RJ45 TC Link connections on the Left system controller loudspeaker When no Bass management is selected no signal will be sent to the subwoofers SLAVE When Bass management is selected low frequency content from the left channel is extracted and sent to the left subwoofer Low frequency content from the right channel is extrac
35. ment for the selected monitor Range 6dB to dB Parameters available for TS212 iDP Subwoofer Pink Noise Calibrate Rel Lev LFE Low Pass LFE Gain Polarity Phase I On Off Level calibration of the selected monitor Range 18dB to 6dB Relative preset volume for the selected subwoofer relative to the calibrated and global volume Range 40dB to OdB Low pass filter on the LFE channel attenuating frequencies above 120Hz With this parameter you can boost the acoustic gain of the LFE channel Range dB to 8dB If the Subwoofer is correctly placed setting the Phase Reverse parameter at 180 should result in a full Phase cancellation at the set Crossover frequency If this is not the case the Delay parameter should be adjusted Range O or180 To time compensate if the Sub is not placed according to the ITU 775 recommendations There are individual Phase settings for each of the Bass Management Crossover frequencies Once set these are stored as Global settings Range O t0180 lt EVRIS HIDE Parameter Categories Global Parameters These parameters apply to the entire system Global parameters stored with presets Boss Management O Mute Status Global parameters NOT stored with presets Ref Levels Analog Input Sensitivity Selected Setup BNC Sync Local Parameters These parameters apply to individual Eyris Loudspeakers Local parameters stored with presets X Cur
36. n on the rear panel MUST be in the out position 5 1 Digital Set up The diagram shows how to connect a 5 1 digital set up All Master loudspeakers require installed digital I O cards AES signal is fed to input 2 of these cards AES SIGNAL The Centre loudspeaker is set as the System Controller by leaving out Channels Bere Er the TC Link button on the rear panel oca 2 The loudspeaker receives audio for both centre amp LFE channels W a A nm via the AES input connector input 2 The LFE subwoofer is fed via Ey the RJ 45 connection from the left speaker RJ45 Network connections from the Centre speaker to the Left amp a Right speakers are required E The Left loudspeaker receives audio for both Left amp LS channels via the rl RJ 45 cable AES input connector input 2 The LS speaker is fed via the RJ 45 oan connection from the Left speaker SLAVE The Right speaker receives audio for both Right amp RS channels via the AES input connector input 2 The RS speaker is fed via the v ALL MASTER MONITORS REQUIRE INSTALLED DIGITAL RJ 45 connection from the Left spea ker O CARDS CONNECT AUDIO TO THE I O CARDS DIGITAL IN 2 CONNECTION TOP XL R When no Bass management is selected only the LFE signal will be sent to the subwoofer When Bass managemert is selected low frequency content from the 5 main channels is extracted and sent to the subwoofer where it is summe
37. n order to determine the number of loudspeakers connected Each loudspeaker is recognized via a unique serial number but can be renamed according to task After the initial scanning of the set up the Master unit will be re scanning the setup every 5 seconds in order to determine any change Eyris iDP PC iP Optional software dedicated tor the Advanced Installer In addition to the common parameters the PC iP software offers Parametric EQ and various Parameter Lock functions lt YRIS HIDE Master Monitor E b ROFESSION AL MONI DUNG a SIF 4 TANNOY lt DP VOLTAGE SELECTOR AFS FBU DIGITA IN 10 WV AG 50 60 ASW 120 MOV AG 50H 15W O CE US J gt Q 12X 14V TSIA G1 d120V ar Slave Monitor Subwoofer Ek EV aii ENE RS IROFESSIONAL MONI ORING SYSTEM TANNOY lt i ipDr VOLTAGE SELECTO IQ IV AC 5D 6G bp 4W 1D ADV AC Wi 45W System controller slave switch In the out position the monitor operates as a System Controller There can only be one system Controller in a setup In the in position the monitor operates as a regular master or a slave unit RJ45 link connectors for downstream slave units remote and PC control Analogue Inputs AES EBU Digital Input World Clock BNC Sync Power Input 100 240v and Power ON Off Switch RJ45 Link Connections for downstream slave units remote and PC control Power Input 100 240v and power ON Off Switch Optional Digital 1 0 Ca
38. nalogue Section Master only Input connectors Impedance Selectable Full Scale Input level Dynamic Range THD N Cross talk A to D Conversion Slaves Only I O connector s 4 Way Semi Active Loudspeaker 40Hz 50kHz 1 5dB 34 Hz 250Hz Passive 1 7kHz DSP Generated 16kHz Passive 25mm 1 25 micron titanium dome neodymium magnet system high frequency 25mm 1 25 micron titanium dome neodymium magnet system 175mm 7 cast chassis shielded 175mm 7 cast chassis shielded 22 Litres Bass Reflex 1022 5 x 196 x 240mm Add 51 mm to height with Plinth AO 4 x 73 4 x 97 16 Add 2 to height with Plinth 18mm MDF internally cross braced enclosure 30mm front baffle Sycamore American Walnut or Black Ash 24 5kg 53 91 Ibs 100 to 240Vac 50 60Hz auto select 45W s Full Power IEC 60065 LF amp LLF Separate 600 PWM amp Tweeter amp SuperTweeter 300 PWM amp 96 96 88 2 64 48 44 1 or 32 kHz optional 192kHz XLR 2 channels AES EBU in 3 x RJ45 proprietary TC LINK AES EBU 24 bit BNC 750 0 6 to 10 Vpp 2 x 16 character dot matrix Menu system four buttons XLR balanced pin 2 pin 3 10 3 k Balanced unbalanced 9 15 21 27 dBu gt 113 dB typ unweighted BW 20 20kHz lt 105 dB typ O 1 kHz 3 dBFS lt 120 dB 20 Hz to 20 kHz 24 bit Dual bit delta sigma sampling at 4 1 5 6 6 1 6 1 MHz 2 x RJ45 proprietary TC LINK lt EVRIS
39. ner Once the acoustic parameters and the control functions are established the user pre set configurations will be implemented by the installation engineer to facilitate recall of up to 18 different sound character profiles to suit differing source materials i e movie stereo hi fi 2 1 radio etc All these system parameters pre sets are controllable via the LCD display on the Master Eyris loudspeakers and various other integrated control systems Crestron AMX Pronto etc lt EVRIS HIDE Concept amp Design Philosophy The following is an introduction to the concept behind the Eyris iDP system Detailed setup guides and explanations of all of the parameter functions can be found in later sections of this manual Eyris iDP Loudspeakers offer the following advantages over conventional loudspeakers System integration and networking preset recall central control Flexibility adjustment of processing parameters to the room personal preference etc Extreme precision Precise alignment of individual monitors at the factory Improved audio quality from intelligent algorithms and precision custom filters Direct Digital Reference Digital Input Setting new standards for quality in high end audio the Tannoy Eyris iDP represents a new generation of active loudspeakers featuring wide bandwidth technology By linking the Tannoy Dual Concentric driver with a Tannoy WideBand SuperTweeter in an acti
40. ns from the Centre speaker to the Left amp Right speakers are required i siave The Left speaker receives audio for both Left amp LS channels via x ra the AES input connector input 2 The LS speaker is fed via the a RJ 45 connection from the Left speaker The CS speaker is fed via the RJ 45 connector from the LS loudspeaker Audio for the CS speaker is fed to input 2 The Right speaker receives audio for both Right amp RS channels EA po IRB via the AES input connector input 2 The RS speaker is fed via NB cen Abi ee Das the RJ 45 connection from the Left speaker O When no Bass management is selected only the LFE signal will be sent to the subwoofer o When Bass management is selected low frequency content from the 5 main channels is extracted and sent to the subwoofer where it is summed with the LFE channel Only LF Centre RF LS and RS contribute to the bass management signal Control system AMX Crestron etc or PC iP can be connected to any spare TC Link out connection REMEMBER To set a master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out position 6 1 Digital 192kHz Set up The diagram shows how to connect a 6 1 digital set up at 192khz All Master loudspeakers require installed digital I O cards 6 1 DIGITAL 192 kHz AES signal is fed to inputs 2 amp 3 of these cards Channels sia Rb E The Centre speaker is set as the System
41. ocessors Each loudspeaker can be individually optimised taking into account its precise location within the room and independently profiled to the room s acoustic properties There are of course many other system configuration permutations a comprehensive selection of which is fully described in this owner s manual along with detailed parameter descriptions and background information Eyris iDP System Installation IMPORTANT Connecting the Eyris iDP loudspeaker system correctly is essential therefore please refer to the Eyris iDP users manual before going any further lt essential that your Eyris iDP home theatre speaker system is installed and set up by a professional installer An acreditted Tannoy iDP system installation engineer will utilise the sophisticated Eyris DP PC iP software package a comprehensive editor amp interface tool designed for the Eyris iDP loudspeaker system to commission the entire system configuration for the room in which it is to be used This Eyris PC iP package allows parametric EQ facilities for specific room acoustic optimisation secure lockout of vital preset parameters subwoofer delay adjustments bass management and many other features All of these control functions are integral to the Eyris iDP system no external equalisers or delay units are required This makes the Ellipse PC iP package an essential tool for the professional Residential Audio and Home Theatre system desig
42. r the time specified in the Utility Menu Power is turned off Exit this mode by pressing any key on system controller lt EVRIS SDR System Delays Sample Rate Digital Input Analog Input AES or WC Converter Samples m seconds cm Samples m seconds in kHz kHz input Rate Converter Rate In Analog Input mode without WC Input selected the system runs on the Master loudspeakers own 96kHz clock Preset Display Name 1 thru 15 Empty or User Preset Presets 1 15 are empty until you choose to store a custom preset after which it will display User Preset Preset Level dB aa Factory Presets Typical applications L C R Ls Rs SUB LFE Bass M X Over Neutral All parameters neutral a good starting point i Off BassMgt 50Hz Music video and Stereo 5 1 5 3 and 6 1 i 50Hz BassMgt 80Hz Music video and Stereo 5 1 5 3 and 6 1 i 80Hz BassMgt Ext 50Hz Music video and Stereo 5 1 5 3 and 6 1 i BossMot Ext 50Hz EVRIS HIDE Cables Below is a guide to the cables used in IDP set up s TC LINK Standard Cat 5 cables Maximum Cable Length 15 meters Cable type Shielded Ethernet Cable Category 5 Connector type RJ45 This connection carries Digital audio 24 bit and network control information Penre gt Pande Brown White Brown Green White Blue Blue White Green Orange White Orange A DE i bm N MI AES EBU Standard cables Pin pin Ground Moximum Coble Length 100 m
43. rd DIGITALIN 2 With this card installed in the master monitor Analogue input slot a 5 1 Digital 6 Master setup becomes an option Three if AES EBU connections 6ch can then be fed to one master monitor and distributed DIGITALIN 3 downstream See the setups section for further information EVRIS Parameter structure accessible via the Eyris Loudspeaker set as System Controller Empty 999002 L Front Stereo Analog Stereo Digital Stereo 192 kHz Volume 50 0 dB Surround Analog Surround Digital Surround 192 kHz 5 1 dig 6 master Select Mode Off a X over 50Hz ENTER X over 80Hz X over Ext 50Hz X over 80Hz X over THX 80Hz Bass Management X over Off 4 b Select Eyris Master xxxx Select clock BNC Input On BNC Input Off External clock BNC Sync xxx A Sensitivity A Input vi 9dBu 15dBu 21dBu 27dBu Select Eyris Master xxxx x Clear setup for A Accept to clear ENTER YA entire network ENTER network setup Recall Present ENTER Select preset Preset locations Recall Presem X ENTER 1 User User 1 to 15 Factory 16 to 19 v Storing locations are 1 to 15 N w Min bh 1 User User Duration before Standby a y Duration before Powersave A dp 1 DP 8 TM TECHNOLOGY Select Task No task L Front R Front Centre C SUB L Sur R Sur
44. ring lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Warning To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture This apparatus must be earthed Use a three wire grounding type line cord like the one supplied with the product Be advised that different operating voltages require the use of different types of line cord and attachment plugs Check the voltage in your area and use the correct type See table below ee Voltoge Line plug according to standard 110 125V UL817 and CSA C22 2 no 42 220 230V CEE 7 page VII SR section 107 2 D1 IEC 83 page CA 240V BS 1363 of 1984 Specification for 13A fused plugs and switched and un switched socket outlets Service There are no user serviceable parts inside Qualified personnel must perform all service Servicing is required when The unit has been damaged in any way such as when the power supply cord or plug is damaged The unit has been exposed to rain or moisture or liquid has been spilled into the unit Objects have fallen into the unit The unit does not work properly The unit has been droppe
45. s iDP loudspeakers exactly as shown on the following pages Power up all loudspeakers Set one of the Master loudspeakers as the System Controller as shown on the Set up diagrams Leaving the TC LINK button on the rear panel on the OUT position does this NOTE There can be only ONE System Controller in a setup After power up the System scans all connected loudspeakers every 5 seconds Set tasks for all loudspeakers from the System Controller unless you have DP Soft or PC iP O Enter Setup menu by pressing ENTER ARROW DOWN ENTER Select the setup type you are using Press ENTER again and the System will generate Pink Noise in one of the monitors Select appropriate task for the loudspeaker currently fed with Pink Noise using the ARROW keys and press ENTER to confirm Continue allocating tasks for all loudspeakers in the system Y our Eyris iDP system is now set up ready for calibration and fine tuning Ellipse DP PC iP has it s own dedicated user manual Analog Stereo Set up With Mono Sub s The diagram shows how to connect a stereo set up with one subwoofer If you are using a standard stereo set up no subwoofer then simply omit the subwoofer Channels L F Ly ve The Left loudspeaker is set as the System Controller by ae leaving out the TC Link button on the rear panel O The Left master loudspeaker receives both the left and System Ch right input signa
46. t connectors input 2 for LF amp input 3 for LS B kusam ame ro me Birras un sano J The SL speaker receives audio for both Ll amp RI channels via the AES A input connectors input 2 for LI amp input 3 for RI The R speaker receives audio for both R amp RS channels via the AES input connectors input 2 for RF amp input 3 for RS When no Bass management is selected only the LFE signal will be sent to the subwoofer When Bass management is selected low frequency content from the 5 main channels is extracted and sent to the subwoofer where it is summed with the LFE channel Only L Centre R LS and RS contribute to the bass management signal Control system AMX Crestron etc or PC iP can be connected to any spare TC Link out connection REMEMBER To set a master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out position The diagram shows how to connect a 5 1 digital set up using a single 3 1 DIG 6 MASTER master unit The set up requires one master loudspeaker with the Digital Te AES SIGNAL AESNEBU input card installed four slave loudspeakers and one subwoofer The Centre speaker is set as the System Controller by leaving out the TC Link button on the rear panel The Centre speaker receives all six channels on the three AES EBU connections 4 Audio for the Centre and LFE channels are connected to the speakers Digital IN connector Aud
47. ted and sent to the right subwoofer ol 1 1 spral Cabo Control system AMX Crestron etc or PC iP can be connected to any spare TC Link out connection REMEMBER To set a master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out position Stereo Digital Set up With Mono Sub s The diagram shows how to connect a digital stereo set up with one subwoofer If you are using a standard stereo set up no subwoofer then simply omit the subwoofer The Left speaker is set as the System Controller by leaving out the Channels AES SIGNAL TC Link button on the rear panel DIGMALIN Y The Left loudspeaker receives both the left and right input signals via ES racional ss the AES input ES I The right speaker and Sub receive audio and control via the output RJ45 TC Link connections on the Left system controller loudspeaker SLAVE When no Bass management is selected no signal will be sent to the subwooter When Bass management is selected low frequency content trom the left and right aga coe channels is extracted and sent to the subwoofer Control system AMX Crestron etc or PC iP can be connected to any spare TC Link out connection If using stereo subs connect in the same way as 2 2 analog REMEMBER To set a master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out
48. udio for the CS loudspeaker is fed to analog input connector 1 meal The Right loudspeaker receives audio for both Right input 1 amp RS E ES s channels input 2 via the analog input connectors The RS loudspeaker is fed via the RJ 45 connection from the Right speaker When no Bass management is selected only the LFE signal will be sent to the subwoofer When Bass managemert is selected low frequency content from the 5 main channels is extracted and sent to the subwoofer where it is summed with the LFE channel Only LF Centre RF LS and RS contribute to the bass management signal Control system AMX Crestron etc or PC iP can be connected to any spare TC Link out connection REMEMBER To set a master loudspeaker as the system controller the TC Link button on the rear panel MUST be in the out position lt EVRIS SDR 6 1 Digital Set up The diagram shows how to connect a 6 1 digital set up All Master loudspeakers require installed digital I O cards AES signal is fed to input 2 of these cards The Centre speaker is set as the System Controller by leaving out MR Channels C IFE the TC Link button on the rear panel n j y I O CARD 2 2 2 O The Centre speaker receives audio for both centre 8 LFE channels MASTER MASTER MASTER via the AES input connector input 2 The LFE subwoofer is fed ur N 1 3 via the RJ 45 connection from the left speaker KJ RJ45 Network connectio
49. ve Parametric EQ setting set via optional PC iP LFE Gain subs LFE Low Pass subs Rel Level Local parameters NOT stored with presets Bass and Treble Delay Lock status set via optional PC IP Room position Calibration Level Tasks Phase Subs Polarity Subs 0 Recall Press ENTER and use ARROW keys to select presets Press ENTER to recall load the selected preset If no user preset are stored on locations 1 to 4 presets 16 to 19 are loaded instead Complete preset list is available on page 52 Store O Press ENTER and select storage location using the ARROW keys O Press ENTER again to store Storage location can be 1 15 Parameter can be locked via the optional PC iP Installers software When trying to change values on a locked parameter the LCD display reads Locked lt EVRIS HIDE Technical Specifications Eyris 3 iDP System Master amp Slaves System Ellipse 8 iDP Frequency Response Low Frequency Alignment 6dB Crossover Frequency Drive units SuperTweeter Dual Concentric Dual Concentric low frequency Low frequency Cabinet Volume LF Alignment Dimensions H x W x D Cabinet Construction Finish Total weight Electronic System Mains Voltage Power Consumption Amplifier System Sample Rates Internal External Digital Section Master only I O connectors Formats Word Clock Input Display Operation A
50. ve system carrying on the consistent frequency response and dispersion up to and beyond 40kHz a true wide bandwidth loudspeaker system has been created for use with contemporary high rate digital audio TANNOY DUAL CONCENTRIC Tannoy Dual Concentric drivers have been incorporated into the Eyris iDP RANGE Intensive research and development has produced an all new version of this proven technology that builds upon the legendary performance of this exclusive Tannoy driver design The time coherent point source and constant directivity nature of the dispersion characteristics inherent in the Dual makes it an accepted industry standard in studio monitoring By exceeding the rigorous demands of the recording and mastering environment Tannoy can ensure that playback performance in the home whether in two channel stereo or multi channel home cinema mode is strictly controlled to accurately reflect the sound engineers artistry In nature all sounds emanate from a single point in space The high frequency unit of the Dual centrally mounted in the throat of the main mid bass driver is so positioned as to acoustically replicate this single point source delivering an incredibly natural sound with an incredibly wide imaging sweet spot that creates an expansive soundstage with remarkably focused placement of vocals and instrumentation This class leading performance is further enhanced by the inclusion of a pod mounted Tannoy SuperTweeter TANNOY Wide

Owners Manual

Contents

Download Pdf Manuals

Related Search

Related Contents