Home

User Guide - mytiviar.nl

1. Time shifting temporarily records the current programme Using this feature users can pause and resume a live programme and even scan through it back ward or forward For example simply pause or skip backward in the current live programme to replay missed crucial scenes when answering a phone call when having gone to the bathroom or when wondering what a character in a drama just mumbled Before using this feature make sure that TimeShift Start is set to Auto or Manual under Settings gt Configuration gt Recording Option For details see Recording Preferences on page 38 Pause the live programme Press the pause button Hl Press it again to resume Skip backward or forward Press the play button to display the progress bar Press the left or right navigation button Repeatedly pressing the yellow button RECORDING TV 37 changes the skip interval from 10 seconds to 10 minutes Jump to the beginning of the time shift recording Press the previous button Kd Return to the live programme Press the stop button W 5 3 Playing Recordings Press the playlist button 4 to access the recordings stored on removable stor age devices For details see Playing Recordings and Videos on page 42 Note TV recordings cannot be played by any receiver other than the receiver that made them 5 4 Recording Preferences Open the Settings gt Configuration gt Recording Option menu e Alarm Confirm Message With th
2. apps may be unavailable or restricted depending on the country so this guide does not cover every app provided by this receiver Customizing the Apps Screen Users can rearrange app icons Place the focus on an icon and press the red but ton Move the icon to a new location using the navigation buttons and then press the OK button to fix it in place Put frequently used apps in the bottom line for faster access INTRODUCTION 13 2 Installation Install the digital TV receiver limited by the specifications shown in the table below Maximum power consumption 24W when in operation 0 5 W when in standby mode Size 220 mm x 35 mm x 145 mm Weight 0 6 kg Operating temperature 0 45 C 32 113 F Storage temperature 10 70 C 14 158 F On the rear this digital TV receiver has several connectors A satellite dish connector AV connectors for a TV and an AV receiver USB ports for removable storage devices An Ethernet port for internet connection A remote control extender connector o E is RS 232C Luu CISlot 1 O Smart Card Slot USB E Je LNBIN our Va The RS 232C port may be used only by an engineer for installation or service 14 2 1 Safety Precautions To avoid hazards and to keep the performance of the digital TV receiver at its best obey the following instructions e Do n
3. Setting Choose Config Mode and determine whether to scan for all available channels or a specific channel Specify the de tails such as port and predetermined intermediate frequency 3 2 Using a Motorized Dish While a fixed dish usually only picks up one satellite a motorized dish can pick up multiple satellites SCANNING FOR CHANNELS 21 There are two control methods for motorized dishes DiSEqC 1 2 and USALS With DiSEqC 1 2 the user must manually operate the dish to locate satellites one by one The digital TV receiver stores each satellite position for later use With US ALS the receiver can pinpoint all visible satellites through calculations using the dish coordinates and the built in database of satellite positions Using DiSEqC 1 2 Open the Settings gt Installation gt Positioner Setting menu Set Positioner to DiSEqC 1 2 and then repeat these steps for every desired satellite 1 Choose Go to Reference from Positioner Command for the dish to return to the reference point at the highest point in its arc The dish s movement accuracy may decrease over long term use To correct movement errors choose Re Calculate from Positioner Command Choose Satellite and choose a target satellite 3 Choose Frequency and select any available transponder 22 Choose Go to Stored Position from Positioner Command to rotate the dish so that it faces the target satellite Place the focus on Move and press
4. System Information menu to check the cur rent version of the receiver Online software updates may be available depending on the country Open the apps screen select Download and then select Software Upgrade Selecting the server name displays a list of available updates Select one or more items and press the red button to download and install them 58 PREFERENCE SETTINGS Appendix A Legal Notices A 1 Copyright The intellectual property found herein belongs to the manufacturer of this product No part ofthis document may be distributed or reproduced in any form or by any means without prior written permission from the manufacturer A 2 Warranty The manufacturer warrants that with normal use and maintenance the product will be free of faults and defects in design and material during the warranty period A 3 Trademarks i The terms HDMI and HDMI High Definition Multime HIGH DEFINITION MULTIMEDIA INTERFACE dia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries 59 DOLBY Manufactured under license from Dolby Laboratories DIGITAL PLUS Dolby and the double D symbol are trademarks of Dolby Laboratories A 4 Correct Disposal of This Product This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or
5. Text it ri Fads NOUTUDG a ee Eee Se Playing MI EOS ae Mkr ia a dah ate 173 FROG ais a Raed Sg So EE Ben Be RE By Ane TAE TVE a ede AA dl ale de cag bo eee Be ale Wet Feds RA a Baits ie e di aed 20 IMPOR ieee So a a a Gee ed Goes Bae Tee 7A Torrent Player ar Ge wd ere nic aa ae Re ee Be 78 Weather ati iris da RIOR as GAY RI AAPP A ad ae tr ro TApps Server Settings s i5 sace d iea aa 8 Preference Settings 8 1 Language Settings did ee Re E a Using Different Fonts oo ooo oo 8 2 Network Settings o e o Proxy Server Settings sa ia Be Sn eee BN Ga DDNSSe ttiNGS a a Be 83 Clock Settings 2 45 sack wa ni bk ane eee bad 8 4 Audio and Video Settings o 00 8 5 On Screen Display Settings o 8 6 Parental Control erica a a eo ac 8 7 Maintaining the Digital TV Receiver Sharing Channel Data oo o eee 8 8 Updating the Digital TV Receiver o A Legal Notices AA Copyrights meiak e aa a r aa daa oO a Ad Waranty sargen ess e ob oe a are e A3 Mademarks mor a A CONTENTS 46 46 46 47 47 48 48 48 49 49 50 50 51 51 52 52 53 53 53 54 54 54 55 55 56 56 57 58 58 59 59 59 59 A A Correct Disposal of This Product 60 CONTENTS 1 Introduction 1 1 Features Beyond simply receiving satellite signals this digital TV receiver has many
6. are not in the chosen category 28 WATCHING TV Logical channel number Some channels have their own channel numbers and others don t With this option enabled the receiver uses the proper num bers Channels that don t have proper numbers are numbered from 1000 With this option disabled channels are numbered in the order in which they are found HD service grouping With this option enabled HD channels are grouped at the top of the channel list 4 2 TVProgramme Guide Program Guide 20 14 03 Jun 2013 Mon 05 40 20 Jun 06 20 20 Jun Thu Newsline delivers the latest news business and weather every hour with stories and analysis from Japan the rest of Asia and around the world 05 50 Channel 234 NHK World Premium NEWSLINE MW SPORTS JAPAN 235 HIB 7 Share p Police killed at Mexi A dictator s wor 236 Star Sports Tennis Djokovic begins Sandusky to appeal abuse c 237 Arirang Arab U S health care ruling due Thursday U Kashmir 238 GEOME China s Ai Weiwei paints bleak pi Bali bomber se China Tropical Stor 239 FASHION TV Sandusky to appeal convictions Sa T Pentagon o Korea Music 240 ZEE STUDIO NEW Wildfires burn across Colo Survey 70 of teens hide o EPG Toggle EPG OK CH Timer 1 1 Day Event Search MHW Epg FAV EPG Option The TV programme guide EPG provides schedule information for current and upcoming TV programmes Before using the
7. con venient and advanced features e This receiver has two slots for CA modules and pay TV cards See Watching Pay Channels on page 31 Users can use removable storage devices to record TV programmes It is pos sible to schedule this receiver to record not only a single TV programme but also every episode of a series using the programme guide See Recording TV on page 36 e Users can pause and resume a live programme See Time Shifting on page 37 e This receiver can play many kinds of media files including photos music and videos See Playing Media Files on page 40 e This receiver can play media files from other devices such as computers and network attached storages See Playing Media files from Other Devices on page 44 e This receiver provides a variety of apps including YouTube See The Apps Screen on page 12 1 2 Accessories The following accessories are included with the digital TV receiver Batteries Power adapter HDMI cable Quick guide The accessories below are separately sold D Wi Fi Dongle TV mount bracket Remote control extender y fa Ge Jack to RCA cable Use the Wi Fi dongle to connect the receiver to a wireless network See Network Connection on page 17 8 INTRODUCTION 1 3 The Remote Control Use the remote control to control the digital TV receiver Before using make sure that batteries are installed correctly e lato o Ep 535
8. human EE health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sus tainable reuse of material resources Household users should contact either the retailer where they pur chased this product or their local government office for details of where and how they can dispose this product for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal 60 LEGAL NOTICES This product is under continuous development Due to changes or improve ments some descriptions and illustrations in this guide may differ slightly from the actual product 2014 06
9. into it Insert the flash drive into one of the receiver s USB ports A dialog box appears with the list of files that are recognized can be installed If no dialog box appears use the Back Up app s Data download from USB storage Open the Settings gt Configuration gt Language Setting menu User Font File Choose a font to use it for text display User Font Language Choose a language to use the font for it 53 User Font Size Correction Adjust the font size To clear all user installed fonts press the red button 8 2 Network Settings A wired network connection is required to perform internet tasks Using media apps such as Weather and Free TV e Accessing a computer to play media files stored on it e Acquiring software updates Open the Settings gt Installation gt Network Setting menu It may be more convenient to set the router for dynamic IP addresses so that the receiver can automatically connect to the network Turn on DHCP if DHCP is enabled on the router If DHCP is not available specify the network details including IP address and gateway Proxy Server Settings If a proxy server is used for internet connections the settings for the proxy server must be configured properly Open the Settings gt Installation gt Network Set ting menu and choose Proxy Server Specify the proxy server s details includ ing port number and user account DDNS Settings A DDNS account allows the receiver to c
10. programme guide make sure that the clock is set correctly under Settings gt Configuration gt Time Setting Press the EPG button to open the programme guide Use the navigation buttons to browse the channel timeline Skip backward or forward by a day Press the red button or the green button Change the timeline view Pressing the EPG button alternates the timeline view between channel based view and time based view Change the time unit Press the FAV button and set EPG Time scale shorter or longer WATCHING TV 29 View a programme s information Press the INFO button on a programme entry Schedule a programme to watch Select a programme entry and choose Play Schedule a programme to record Select a programme entry and choose either Once Record or Series Record For details see Scheduling TV Recordings Using the Programme Guide on page 36 Cancel a scheduled event Select a programme entry that is scheduled to watch or record Search for programmes Press the yellow button Choose Search event name and enter search criteria It is also possible to search by programme genre Choose Content Code and choose a genre Programme Guide Preferences While most TV stations provide programme information for only a couple of days in each transponder some TV stations such as Canal and Sky use a dedicated transponder to provide programme information for 7 or more days Press the blue button and determine which type of programme guid
11. skip interval from 10 seconds to 10 minutes Skip to a specific point Press the play button B to display the progress bar and then enter a number Play fast forward or backward Press the forward button gt gt or the back button 44 Repeatedly pressing theses buttons changes the playback speed Skip to the previous or next recording or video Press the previous button Kd or the next button PI Add a bookmark to a recording When playing a recording users can add book marks to the recording for easier navigation Press the red button to place a vertical marking bar at the current point on the progress bar Bookmarks are preserved with the recording for later use Note L Only TV recordings can be bookmarked 42 PLAYING MEDIA FILES Jump to a bookmark Press the green button Remove a bookmark Jump to a bookmark using the green button and then press the red button to remove the bookmark Change subtitle display When a video is playing press the MENU button and change subtitle display options such as letter size and colour For details on how to add font files see Using Different Fonts on page 53 Note L SMI and SRT subtitle formats are only supported by the receiver 6 4 Viewing Photos View the previous or next photo Press the left or right navigation button Start slideshow Press the red button To pause and resume the slideshow use the pause button Hl Slideshow Preferences On
12. the left or right navigation button to finely drive the dish east or west for the best signal The dish rotates con tinuously as long as either of these buttons is held down Choose Store Satellite Position from Positioner Command to save the dish s current position for the target satellite SCANNING FOR CHANNELS It may be useful to set limits to the movement scope of the dish for easier ma nipulation Repeat these steps two times to set a limit position for the east and the west 1 Choose Go to Reference from Positioner Command for the dish to return to the reference point 2 Placethefocus on Move and press the left or right navigation button to drive the dish 3 Choose Set East soft Limit or Set West soft Limit from Positioner Com mand to save the dish s current position to use it as a limit position Choosing Disable soft Limits from Positioner Command clears these limit po sitions Using USALS Open the Settings gt Installation gt Positioner Setting menu Set Positioner to USALS and then specify these items correctly e Dish Longitude Enter the longitude where the dish is located Dish Latitude Enter the latitude where the dish is located Give the dish a test run to see if it works properly Repeat these steps for every desired satellite 1 Choose Go to Reference from Positioner Command for the dish to return to the reference point 2 Choose Satellite and choose a target satellite 3 Choo
13. the photo list screen press the green button Slide Time Adjust the slideshow speed Repetition Determine whether or not to repeat slideshows Title Determine whether or not to display file names Downscale Determine whether or not to display a reduced size Set Save and Exit to Yes to finish 6 5 Playing Music Select one or more songs using the red button and then press the OK button to play them PLAYING MEDIA FILES 43 Skip to the previous or next song Press the previous button or the next button PI Shuffle or repeat playback Press the red button Repeatedly pressing the red button changes the play mode CRI Songs are randomly played A Songs are played only once CAD all songs are repeated 1 The current song is only repeated Add songs to the current playlist Press the green button Select more songs using the red or green button and then press the yellow button Remove a song from the current playlist Place the focus on a song entry and press the yellow button 6 6 Playing Media files from Other Devices This receiver can play media files from computers or other DLNA enabled devices such as TVs and tablets connected to the receiver via a network For example when a computer and the receiver is connected to the same network the receiver accesses the computer to play the computer s media files or vice versa Accessing Other Devices Open the apps screen and select T Air The f
14. the speed of a storage device Choose Current Device select a storage device and then press the green button Open the file list of a storage device for playback Choose Current Device se lect a storage device and then select Play List 40 Remove a removable storage device from the receiver Choose Current Device and select a removable storage device Press the red button and then confirm to remove it Check a storage device Choose Current Device select a storage device and then choose Storage Check If any faults are found they are automatically re paired Access a shared folder on a computer Choose Current Device and select Net work Drive Choose Network Setting choose Folder and then specify the path to the folder A good example of shared folder paths is 192 168 1 25 media View the state of the user available memory Choose Current Device and se lect User 6 2 Managing Files Press the playlist button 4 to access the removable storage devices connected to the receiver Display only files of a specific type The chosen file type is displayed on the top left ofthe screen Press the left or right navigation buttons to see files of a differ ent type To display all files regardless of file type choose Play List Imported Files stands for videos except TV recordings View files on another storage devices Press the playlist button 4 and choose a different storage device Sort files Press the yellow button and cho
15. webpage Press the yellow button Zooming out a webpage Press the blue button 46 Navigating Webpages A pointer is available to help users navigate webpages Use the navigation but tons to move the pointer To see another webpage move the pointer over a link and press the OK button Enter a web address Press the MENU button select the web address field and then enter a web address using the on screen keyboard Refresh a webpage Press the MENU button and select the refresh icon Halt a webpage from downloading Press the MENU button and select the stop icon X Move between the series of webpages that have already been viewed Press the MENU button and select the back icon or the forward icon gt View the web browsing history Press the RECALL button to display the list of recently visited webpage Select a webpage to open it Bookmarks Bookmark the current webpage Press the FAV button and press the red button Open a bookmarked webpage Press the FAV button to display the list of book marked webpages Alternatively press the MENU button and select the book mark icon Select a bookmark to open it Delete a bookmark Press the FAV button and place the focus on a bookmark Press the yellow button and confirm to delete it Edit a bookmark Press the FAV button and place the focus on a bookmark Press the blue button and edit the web address using the on screen keyboard Set the current webpage as home p
16. Edit Services Select a channel and modify its attributes such as channel name for example Add channels to a favourites group Press the blue button select Set Favorites and then press the green button to display the list of favourites groups Choose a favourites group then select one or more channels Whenever a channel is selected it appears in the favourites group on the middle of the screen To select a different favourites group press the green button and select a favourites group Remove channels from a favourites group Press the blue button select Set Fa vorites and then press the green button to display the list of favourites groups Choose a favourites group then select one or more channels from the favourites group Add a favourites group Press the blue button select Set Favorites and then press the green button to display the list of favourites groups Press the yellow button and enter a group name using the on screen keyboard Rename a favourites group Press the blue button select Set Favorites and then press the green button to display the list of favourites groups Place the 34 WATCHING TV focus on a favourites group and press the green button Enter a new name using the on screen keyboard Rearrange favourites groups Press the blue button select Set Favorites and then press the green button to display the list of favourites groups Place the focus on a favourites group press the FAV button and then move
17. O O gt Sivas ZN E Ka 3 e Coss Pe Yoh ears gt Bs a Seog eet o jets es lella 0 T E m INTRODUCTION 9 Turn the digital TV receiver on or off V Format Switch the display format 4 3 16 9 See Audio and Video Set tings on page 55 Resolution Change the picture resolution O Use the numeric buttons to enter numbers O Subtitle Display subtitles See Displaying Subtitles on page 31 O Teletext Display teletext pages See Viewing Teletext on page 31 Info Display information about the current programme O Recall Display the list of recently viewed channels Use these navigation buttons to navigate the menus and interactive screens OK Select an item In addition use this button to display the channel list See Channel List on page 28 Menu Display apps See The Apps Screen on page 12 In addition use this button to return to the higher menu level P Exit Return to the previous screen or close the current list or dialog box FAV Display the list of favourite channels EPG Display the programme guide See TV Programme Guide on page 29 Play List Display the list of files stored in a removable storage device See Playing Media Files on page 40 Use these volume buttons to adjust the volume X Mute the sound B Use these channel buttons to change channels These colour buttons perform different functions d
18. Player Select a computer to connect it to Torrent Player If this is the first connection enter the number displayed on the receiver s screen into uTorrent s dialog box Selecting a media category displays a list of files of the same type that are cur rently managed by uTorrent Select a media category and then select a file to play it The Torrent category displays the torrents list Selecting a torrent shows all the files contained in it Select a file to play it Note L It is not possible to play files that are not completely downloaded 7 8 Weather Use the Weather app to get weather forecasts for thousands of places around the world Add a city Press the green button and enter search criteria using the on screen keyboard Select a city from search results Press the blue button and select Delete history list Select one or more cities using the red button press the OK button and then confirm to delete them Set a city as start point Place the focus on a city entry and press the FAV button Apps 51 7 9 TApps Users can download and install various apps provided by this receiver s manu facturer Download new apps Open the apps screen and select T Apps A list appears showing new available apps Select one or more apps using the OK button and press the red button to start downloading Play an app Open the apps screen and select T Apps Place the focus on an app and press the green button Delete an ap
19. Press the green button Specify the TV radio s details in cluding name and web address Select Add when finished Note The web address must include http and indicate the media itself not the webpage that contains it Edit a radio station Place the focus on a radio station entry and press the yellow button Change the details and select OK to finish Delete a radio station Place the focus on a radio station entry press the blue button and then confirm to delete it 7 6 TV Portal TV Portal is a web portal run by this receiver s manufacturer that brings to gether web content dedicated for consumer electronics from diverse websites There are multiple web categories including news and multimedia Use the navigation buttons to navigate the web categories and the OK button to select an item Press the RECALL or EXIT button to return to the previous screen Note L Web categories and items in each category may change 50 APPS 7 7 Torrent Player Many people use uTorrent a peer to peer file sharing program to share media files Torrent Player can communicate with uTorrent on a computer to play media files downloaded by uTorrent Before using Torrent Player make sure that uTorrent is installed on a computer on the same network as the receiver Start Torrent Player and a list appears showing computers on which uTorrent is running and computers that have been connected to Torrent
20. Press the yellow button and enter search criteria using the on screen keyboard Lock or unlock channels Press the blue button and select Lock Unlock Ser vices Select one or more channels Whenever a channel is selected it appears WATCHING TV 33 in the list of locked channels on the middle of the screen Selecting a channel from the list of locked channels unlocks it Rearrange channels Press the blue button and select Move Services Select one or more channels Place the focus on a channel entry to move the selected channels above it and then press the green button If the Logical channel num ber option is active however channels are impossible to move For information of this option see Channel List Preferences on page 28 Delete channels from the channel list Press the blue button and select Delete Services Select one or more channels Press the green button and then confirm to delete them Hide channels from the channel list Press the blue button and select Skip Ser vices Select one or more channels Whenever a channel is selected it appears in the list of hidden channels on the middle of the screen Selecting a channel from the list of hidden channels makes it visible Add a new channel Press the blue button select Edit Services and then press the green button Specify the channel details including frequency and channel name Select Yes when finished Modify a channel s attributes Press the blue button and select
21. Programme Guide 0 Programme Guide Preferences 4 3 ControllingAudio 0 0 0 00 44 Displaying Subtitles lt sy cece ae ee ae ek 4 5 Viewing Teletext oo ooo 4 6 Watching Pay Channels o 4 7 Watching Subchannels o o oo oo 4 8 Setting Up Timers i rien ia das Wake Up Timer at ica is a Sl Timers 0d as Saving Energy i ei a air o o Ee os 4 9 Managing Channels AMO HbbTV a cot hs de AA E Eve A 5 Recording TV 5 1 5 2 5 3 5 4 Recording TV Programmes o o ooo ooo Scheduling TV Recordings Using the Programme Guide Manually Scheduling TV Recordings TiMESSIINO 4 6 ics at Oe eo a id Playing Recordings is aci e domes wht iat Recording Preferences o o o ooo ooo 6 Playing Media Files 6 1 6 2 6 3 6 4 6 5 6 6 Managing Storage Devices o oo Managing Files cauca rai Playing Recordings and Videos VIEWING Photos s a id dt ds Slideshow Preferences o o o o ooo Playing MUSIC aa a a R Playing Media files from Other Devices Accessing Other Devices o o o o ooo o Allowing Other Devices to Access the Receiver CONTENTS 7 Apps Fil Webzeal ss RR BEES aes Viewing a Webpage o o oo ooo o Navigating Webpages o ooo e eee eee BOOKMATkS Ts cies matarae arte bods bd a ohh in Entering
22. See Scanning for Channels on page 20 INTRODUCTION 11 1 5 The Apps Screen 1001 TRACE URBAN INTER HD Fri 28 Mar 2014 63 5 F 17 5 C Seoul South Korea 20 23 Bee Be Network Storage CH Edit TV Sche Download Back Up X Bros g Km iF Li ebzea T Apps i iRadio Torrent Reservat TV Portal YouTube Pressing the Menu button displays app icons at the bottom of the screen To view more apps press the up navigation button To access the customary menus select Settings Some apps allow users to quickly access frequently used setting menus and functions e Back Up See Maintaining the Digital TV Receiver on page 57 CH Edit See Managing Channels on page 33 Download See Updating the Digital TV Receiver on page 58 TV Schedule See TV Programme Guide on page 29 TAir See Accessing Other Devices on page 44 T Server See Allowing Other Devices to Access the Receiver on page 45 e Movie See Playing Media Files on page 40 e Music See Playing Media Files on page 40 Network See Network Settings on page 54 Photos See Playing Media Files on page 40 Recordings See Playing Media Files on page 40 Reservation See Manually Scheduling TV Recordings on page 37 Storage See Managing Storage Devices on page 40 12 INTRODUCTION e YouTube See YouTube on page 48 For other apps see Apps on page 46 Note While some apps such as Calendar are easy to use other internet based
23. Tivior mini User Guide Contents 1 Introduction Ml AS e aro as a Gite a es e rra cock T see 1 2 ACCOSSONIES asi a ra a ee dh 1 3 The Remote Control oo o WA Getting Started vicio a a rs a ee eS 1 5 The Apps Screem so 36 4 2 6d Bee A doe win 0 ee a Customizing the Apps Screen 2 0 eee ee ee Installation 2 1 SafetyPrecautions es saosa a s aea aone ee ee ee 2 2 Satellite Dish Connection sssaaa 23 TV Connections 5 4 20 a ewe A ee ee we ee ee t HDMI CONDECION 200 A Composite Video Connection oo oo eee 24 AV Receiver Connection o o 2 5 Network Connection o e 2 6 Mounting the Receiverona TV o oo Scanning for Channels 3 1 Satellite Dish Settings o o eee eee ENB SCEUINOS so a ia ie Unicable Settings ss aaa cr A ed 3 2 Using a Motorized Dish o oo Using DISEGC 1 2 Sac 34 sae Mae ee ee ee SR ee es USING USALS os cia si Sol aw hae ee a 3 3 Scanning for Satellite TV Channels Scanning for Every Channel o o ooo oo Scanning a Specific Transponder o o ooo oo 0 ee Scanning for One Channel o o ooo oo 11 12 13 14 15 15 16 16 16 17 17 18 20 20 20 21 21 22 23 23 24 25 25 4 Watching TV 41 Ghannel Lista e628 eco ots Wee Gg eek Channel List Preferences 4 2 TV
24. age Press the FAV button and press the green button Open the home page Press the MENU button and select the home page icon fr Apps 47 Entering Text Switch to a different language keyboard Press the MENU button and select the keyboard icon E44 A list appears showing available keyboard layouts Choose a keyboard layout and then choose a keyboard language Restart the Webzeal to put the chosen keyboard into use Switch between the numeric keypad and the normal keyboard Press the MENU and press the green button Enter text into a field When the pointer is over a text field pressing the OK button displays available typing actions Choose Input Text and enter text using the on screen keyboard 7 2 YouTube Use the YouTube app to watch videos from the YouTube website View videos in a specific category Press the green button and choose a cat egory Search for videos Press the yellow button and enter search criteria using the on screen keyboard Download a video Place the focus on a video entry and press the record button O View the list of downloaded videos Press the red button Playing Videos Select a video from the list of videos to play it Note Some videos may not play properly depending on how they are encoded View in full screen Press the OK button To exit full screen press it again 48 Apps Pause and resume playback Press the pause button Hl and pres
25. ailable with the current channel Press the Teletext button to display the teletext page Each teletext page has a page number Enter a page number to view a different teletext page 4 6 Watching Pay Channels Pay channels are encrypted to prevent non subscribers from watching them Make sure to buy the correct pay TV card and CA module if necessary to watch pay channels that are available This receiver has two slots on the left side of the rear The upper slot accommod ates CA moduels and the lower slot accommodates Conax pay TV cards WATCHING TV 31 To watch Conax scrambled pay channels insert a Conax pay TV card into the card slot To watch non Conax channels insert a pay TV card into a CA module and then insert the CA module into the CAM slot To view the information about the pay TV card open the Settings gt Utilities gt CAS menu Select the slot in which the pay TV card or CA module is installed 4 7 Watching Subchannels Particular channels such as sports channels or film channels may have subchan nels multi feed For example a film channel may use subchannels to air a single film with regular minutes long intervals at the same time The subchannel symbol highlighted on the programme information dialog box indicates that the current channel has multiple subchannels Press the blue button and a list appears showing available independent programmes Select a programme to watch it 4 8 Setting Up T
26. an 16 9 pictures blow up to fit the height of the 4 3 screen with the sides cut off HDMI Dolby Digital Determine whether or not to pass through Dolby au dio via HDMI when available e Dolby Digital Default Determine whether or not to use Dolby audio when available PREFERENCE SETTINGS 55 e Sound Mode Generally an audio track has two sound channels Determine which sound channel to use by default Audio Sync Delay If the sound and picture don t match up adjust this until they match e Eco Power Mode See Saving Energy on page 33 8 5 On Screen Display Settings Open the Settings gt Configuration gt Display Setting menu e Info Box Position Specify how much to raise or lower the position of the programme information dialog box Info Box Display Time Specify how long to display the programme inform ation dialog box when changing channels Volume Bar Display Time Specify how long to display the volume bar when adjusting the volume e Zapping Mode Determine what to display when changing channels With this set to Black Screen the receiver displays nothing With this set to Freeze the receiver displays the last still picture of the previous channel Up Down Key Determine for what to use the up and down navigation but tons when watching a channel With this set to Simple Service List the sim plified channel list is displayed With this set to HD Service Change a chan nel change is made between HD chann
27. ay appear on the dialog box to indicate what the cur rent channel and programme features e This is a pay channel See Watching Pay Channels on page 31 El Teletext pages are available See Viewing Teletext on page 31 EJ Subtitles are available See Displaying Subtitles on page 31 KI Dolby audio is available See Audio and Video Settings on page 55 e HD This is an HD channel See Audio and Video Settings on page 55 Subchannels are available See Watching Subchannels on page 32 El The receiver is currently connected to the network Use the up and down navigation buttons to view information about the previ ous and following programmes and use the left and right navigation buttons to view information about programmes on other channels To view more in formation about the current programme press the INFO button again When a channel number other than the current channel is displayed pressing the OK button switches to the channel Pressing the FAV button displays the list of channel groups including favourites groups After a group is chosen users can change only between the channels that belong to the group 27 4 1 Channel List Use the channel listto change channels more easily Pressthe OK button to open the channel list Switch to a specific channel Place the focus on a channel entry using the nav igation or numeric buttons and then press the OK button Skip through a channel list Use the up an
28. d LNB also called universal LNB generates two alternative frequencies to re ceive a wider band of satellite frequencies e LNB 22 kHz Either turn this on or off to pick up a higher or lower frequency band 20 DiSEqC Switch If one or more typical DiSEqC switches are used this option must be set properly Specify which of the DiSEqC ports is connected to the intended dish On this screen users can change satellite and transponder data Rename a satellite Choose Satellite and select a satellite Press the red button and then enter a new name using the on screen keyboard Edit a satellite s longitude Choose Satellite and select a satellite Press the green button and then modify the longitude Clear all transponders of a satellite Choose Satellite and select a satellite Press the yellow button and then confirm to clear them Add a transponder Place the focus on Frequency and press the green button Specify the frequency symbol rate and polarization Edit a transponder Choose Frequency and select a transponder Press the yel low button and then modify the transponder s details Delete a transponder Choose Frequency and select a transponder Press the red button and then confirm to delete it Unicable Settings If the user s house is equipped with a single cable router configure unicable set tings properly Open the Settings gt Installation gt Dish Setting menu Set LNB Type to Unic able and then choose Unicable
29. d down navigation buttons or altern atively the Page up and Page down buttons Display specific channels Press the red button to sort or filter the channel list A list of channel categories is displayed in the middle of the screen Repeatedly pressing the red button displays different channel categories Choose a channel category and then a subcategory Add a channel to favourites groups Place the focus on a channel entry and press the green button A list appears showing multiple favourites groups Se lect one or more groups and then press the EXIT button to finish View a favourites group s channels Press the FAV button and choose a favour ites group Search for channels Press the yellow button and enter search criteria using the on screen keyboard Channel List Preferences Press the blue button and set these options properly e Service preview With this enabled selecting a channel entry displays the channel s picture in the inset window on the upper right of the screen Select itonce more to switch to the channel With this option disabled selecting a channel entry immediately switches to the channel Keep viewing service when exit With this disabled pressing the EXIT but ton switches to the channel that was focused on With this option enabled pressing the EXIT button closes the channel list without changing channels View only filtered list With this enabled choosing a channel category fil ters out channels that
30. e guide and press the OK button on a programme entry scheduled to air later Either choose Once Record to record the programme only once or choose Series Record to record its every episode At the scheduled time the receiver turns on if it is off and begins recording the programme Even if the receiver is set to turn off before the time that the record ing is supposed to finish the receiver does not turn off until recording is done 36 Manually Scheduling TV Recordings Manual scheduling of programmes is sometimes needed because the pro gramme guide is not always consistent with the actual broadcasting time There may be changes in broadcast schedules or delays due to other programming Open the apps screen and select Reservation Add a recording event Press the green button Specify the program details including channel and start time To display the programme at the scheduled time without recording set Type to Play With Alarm Confirm Message enabled a message appears to notify that the event will start in 5 minutes Select Yes when finished View recording events by date Press the yellow button to open the calendar Select a date to view its recording events Edit a recording event Place the focus on an event entry press the OK button Delete a recording event Place the focus on an event entry press the red but ton and then confirm to delete it To clear all events at once press the blue button 5 2 Time Shifting
31. e to use It takes a rather longer time for the receiver to get programme information from the MediaHighway programme guide due to the large amount of information Users can set the receiver to access the MediaHighway programme guide when the receiver turns on to save time Press the FAV button and set Start MHW Epg Automatically to On Note The MediaHighway programme guide may be not available depending on the country 4 3 Controlling Audio When watching a channel press the yellow button to control audio using these options 30 WATCHING TV e Audio Track ATV programme may provide audio in two or more languages Choose a different audio language if available Sound Mode Generally an audio track has two sound channels Determine which sound channel to use Sound Level The volume may vary depending on channel Use this to make the volume even at every channel With this set to High for example the volume is automatically adjusted to the level that is higher 30 than the cur rent channel s 4 4 Displaying Subtitles When the subtitle symbol _ is highlighted on the programme information dia log box it indicates that subtitles are available in one or more languages for the current programme Press the Subtitle button and choose a subtitle language to display subtitles 4 5 Viewing Teletext The teletext symbol E highlighted on the programme information dialog box indicates that teletext pages are av
32. els With this set to Service Change a channel change is made HbbTV On Off Enable this option to make HbbTV services available 8 6 Parental Control TV programmes are rated according to their level of violence nudity and restric ted language It is possible to set the receiver to block programmes rated a cer tain class or higher to prevent children from watching them It is also possible to lock specific apps so that children or others can t access them Users must enter the passcode to watch a blocked programme or access a locked app 56 PREFERENCE SETTINGS Open the Settings gt Configuration menu choose Parental Control menu and then enter the passcode e Censorship Specify a programme rating Change PIN code Change the passcode The default is 0000 System With this set to Lock the passcode is required when turning on the receiver e Installation With this set to Lock the passcode is required when accessing the Installation menu e Configuration With this set to Lock the passcode is required when access ing the Configuraton menu e Edit Services With this selected the passcode is required when accessing the CH Edit app T Apps With this set to Lock the passcode is required when accessing the T Apps app e Play List With this set to Lock the passcode is required when pressing the playlist button to access a removable storage device 8 7 Maintaining the Digital TV Receiver The internal flash memor
33. epending on what the receiver is currently doing Use these buttons to control recording and playback See Recording TV on page 36 and Playing Media Files on page 40 A Use these buttons to scroll lists E TV Radio Switch between TV channels and radio stations E SLEEP Adjust the sleep timer See Sleep Timer on page 33 v This button performs different functions depending on what the re ceiver is currently doing 10 INTRODUCTION E These buttons are no use 1 4 Getting Started Install the digital TV receiver properly referring to Installation on page 14 Plug the power adapter into a power outlet and insert the connector into the power socket on the rear of the receiver Then press the power button on the remote control to turn on the receiver When turning on the receiver for the first time the initial setup process automat ically starts Follow the on screen instructions to finish the process At each step either make a choice or skip the step 1 Choose a language for the user interface 2 Configure the network settings See Network Connection on page 17 and Network Settings on page 54 3 Install add ons to internet based apps such as Free TV and Radio when an internet connection is available Additionally determine whether to re store the receiver using the stored settings and channels if there is any backup data 4 Set the clock See Clock Settings on page 55 5 Scan for TV channels
34. ile list screen appears with the list of detected devices Select a device and then select a file to play it For details on how to play videos see Playing Recordings and Videos on page 42 for music see Playing Music on page 43 and for viewing photos see Viewing Photos on page 43 44 PLAYING MEDIA FILES Allowing Other Devices to Access the Receiver Open the apps screen select T Server and then select Start When Start Type is set to Auto other devices can access the receiver at any time when the receiver is on PLAYING MEDIA FILES 45 7 Apps Press the MENU button to open the apps screen Most apps require an internet connection for proper operation 7 1 Webzeal Use the Webzeal app to surf the Internet Note The Webzeal cannot play flash video which is heavily used on the web Pressing the MENU button displays a toolbar including a web address field and several icons at the bottom of the screen Viewing a Webpage Webzeal takes up the lower part of the screen so that users can watch live TV on the upper part Adjust the vertical view size Press the red button or alternatively press the MENU button and select the vertical view icon Repeatedly pressing the red button changes the view size from full screen to half and then to quarter Adjust the horizontal view size Press the green button or alternatively press the MENU button and select the horizontal view icon Zooming in a
35. imers Wake Up Timer This receiver can be set to turn on at a specific time and tune in to a specific channel Open the Settings gt Configuration gt Time Setting menu Determine 32 WATCHING TV how frequently to run the wake up timer by setting Wake Up Mode to anything otherthan Off According to this setting specify the date days of the week time and channel Sleep Timer This receiver can be set to turn off at a specific time Open the Settings gt Config uration gt Time Setting menu Determine how frequently to run the sleep timer by setting Sleep Mode to anything other than Off According to this setting specify the date days of the week and time Saving Energy Two standby modes are available Open the Settings gt Configuration gt A V Output Setting menu Enable the Eco Power Mode option to reduce power con sumption significantly With this option enabled the receiver consumes the least amount of power only for the remote control operation while in standby mode With this option disabled the receiver only shuts offthe audio and video outputs when going into standby mode Even with this option disabled pressing the power button on the remote control twice in quick succession puts the receiver into the aforementioned standby mode 4 9 Managing Channels Open the apps screen and select CH Edit Sort channels Repeatedly pressing the red button sorts channels by a different category Search for channels
36. is enabled a message appears to notify users that a scheduled recording event will begin in 5 minutes Recording Stop Message With this disabled pressing the stop button Ml stops the current recording immediately without asking for confirmation e Extra Recording Time Before Start It may be good to begin recording a few minutes earlier than the scheduled start time to avoid missing the beginning of a programme Specify how much earlier the receiver should begin record ing Extra Recording Time After Finish It may be good to finish recording a few minutes later than the scheduled end time to avoid missing the end of a pro gramme Specify how much later the receiver should finish recording e TimeShift Start With this set to Auto the receiver begins time shift record ing whenever changing channels With this set to Manual pressing the pause 38 RECORDING TV button Hl begins time shift recording With this set to Off time shifting is disabled TimeShift Duration Specify the maximum duration for time shift record ing For example if this is set to 30 minutes only the last 30 minutes of the programme are temporarily preserved for playback Playback Position Jump When playing a recording users can use the left and right navigation buttons to skip backward and forward Specify the amount of time to skip at a time With this set to Auto it varies from 10 seconds to 4 minutes depending on running time Playback Numeric Func
37. it to a new location Delete a favourites group Press the blue button select Set Favorites and then press the green button to display the list of favourites groups Place the focus on a favourites group press the blue button and then confirm to delete it 4 10 HbbTV HbbTV combines TV services delivered via broadcast with services delivered via broadband HbbTV services include video on demand interactive advertising voting games social networking programme related services and more When watching a channel a rounding circle may appear in the upper right corner of the screen to indicate that HbbTV services are available Press the red button to access the channel s HbbTV services via the Internet Note The receiver must be connected to the Internet to use HbbTV services HbbTV services may not be available depending on the TV station WATCHING TV 35 5 Recording TV This digital TV receiver can record TV programmes onto a removable hard drive or flash drive However flash drives are not recommended for recording Connect a removable hard drive to one of the receiver s USB ports For details on how to manage removable storage devices see Managing Storage Devices on page 40 5 1 Recording TV Programmes Press the record button to instantly begin recording the current programme Scheduling TV Recordings Using the Programme Guide Use the programme guide to schedule TV recordings Open the programm
38. mps or 18 INSTALLATION displays Directing light at the extender may interfere with remote control signal transmission INSTALLATION 19 3 Scanning for Channels A broadcast satellite s channels are called transponders A transponder gath ers signals over a range of uplink frequencies and retransmits them on a differ ent set of downlink frequencies to receivers on Earth Multiple TV channels are broadcast through a transponder A transponder has three main components frequency symbol rate and polarization 3 1 Satellite Dish Settings LNB Settings A group of satellite dish settings must be properly configured for each desired satellite before performing a channel scan Open the Settings gt Installation gt Dish Setting menu There are two signal bars on the lower part of the screen The signal level bar indicates how strong the signal is and the signal quality bar indicates how easy it is to pick up To view an enlarged signal bar display press the blue button Configure the following settings properly using the signal bars e Satellite Choose a target satellite from the list of satellites e Frequency Choose a target transponder from the list of transponders LNB Power An LNB must be supplied with power to operate Turn this on to supply the LNB with power if it doesn t have its own power supply LNB Type Specify what type of LNB is used LNB Frequency Specify what frequency the LNB generates A dual ban
39. orm a channel scan This may be useful when installing a new satellite dish To activate this function press the green button and then confirm to use it Scanning for Every Channel Several methods are available for scanning for every channel Set Search Mode to Auto With this method the receiver uses its numerous database of transponders when scanning for channels Set Search Mode to Blind Transponders occasionally change so the re ceiver may happen to miss some channels when scanning for channels using the transponder database With this method the receiver scans all potential 24 SCANNING FOR CHANNELS transponders using every possible combination oftransponder elements not to miss any channel in a scan However it takes much longer time Set Search Mode to Fast Scan Particular satellite TV service providers man age dedicated transponders to provide up to date transponder information With this method the receiver uses that sort of transponder for faster and more precise scanning Choose Select Operator and select a satellite TV ser vice provider Set Search Mode to Canal Digital Nordic With this method the receiver scans only for Canal Digital channels Make sure that the common options are properly configured before selecting Start Search to start a channel scan Scanning a Specific Transponder Generally one transponder carries multiple TV channels To scan a specific transponder for the channels it carries se
40. ose a category Create a folder Press the blue button and select New Folder Rename a file or folder Place the focus on a file or folder press the blue button and then select Rename Enter a new name using the on screen keyboard Move files or folders into another folder Select one or more files or folders using the red button and press the blue button Select Move to Folder and choose a subfolder or the upper folder Copy files or folders onto another storage device Select one or more files or folders using the red button and press the blue button Select Copy to Device and choose a different storage device PLAYING MEDIA FILES 41 Delete files or folders Select one or more files or folders using the red button and press the blue button Select Delete and confirm to delete them 6 3 Playing Recordings and Videos Select one or more recordings or videos using the red button and then press the OK button to play them Note L Some videos may not play properly depending on how they are encoded Pressing the play button displays the progress bar Use the progress bar to navigate through the video To hide the progress bar press the play button gt again Pause and resume playback Press the pause button lll and press it again to resume Skip backward or forward Press the left or right navigation button To continu ously skip press and hold these buttons Repeatedly pressing the yellow button changes the
41. ot block ventilation openings on the receiver When installing the receiver in a cabinet make sure to leave a space of at least 10 centimetres around the receiver for cooling Do not place the receiver in direct sunlight and close to heat emitting devices that can interfere with cooling Do not expose the receiver to water and moisture to prevent fire and electric shock Use only accessories provided or specified by the manufacturer Use dry cloth to clean the receiver CAUTION Never open the receiver casing under any cir RISK OF ELECTRIC SHOCK A m BO NOTOFEN cumstances or the warranty will be void WARNING SHOCK HAZARD DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR Repair tasks must be done only by qualified per sons with expertise 2 2 Satellite Dish Connection Connect the cable from the satellite dish to LNB IN INSTALLATION 15 2 3 TV Connections This digital TV receiver has two video connectors for use by a TV HDMI Composite video Use the HDMI connector to connect the receiver to a TV for the best picture qual ity If the TV has no available HDMI connector use the composite video con nector HDMI connection A ir Connect the receiver s HDMI output connectors to the TV s HDMI input con nector using an HDMI cable Note Some HDMI cables and TVs may not be compatible with the receiver due to differing HDMI specifications Composi
42. p Open the apps screen and select T Apps Place the focus on an app and press the yellow button T Apps Server Settings The T Apps server s web address may need to be reconfigured properly For in formation about the T Apps server contact the local distributor Open the apps screen select T Apps and then press the blue button Use the other color buttons to enter the server address ID and password respectively 52 APPS 8 Preference Settings 8 1 Language Settings Open the Settings gt Configuration gt Language Setting menu e Menu Language Determine what language to use for the interface Audio Language A TV programme may provide audio in two or more lan guages Determine what audio language to use by default Audio Language 2 Determine what audio language to use as an alternative when the default language is not available Subtitle Language A TV programme may provide subtitles in one or more languages Determine what subtitle language to use by default Subtitle Language 2 Determine what subtitle language to use as an altern ative when the default language is not available Teletext Language A TV channel may provide teletext pages in one or more languages Determine what teletext language to use by default Using Different Fonts Users can install truetype font files on the receiver to use them with subtitles and displays Create a folder named plugin font on a flash drive and copy font files
43. reate a web address that points to the user s local network so anyone can access the receiver from anywhere in the world If a DDNS account is available configure the DDNS settings properly Open the Settings gt Installation gt Network Setting menu and press the red button Spe cify the DDNS account s details including web address and user account 54 PREFERENCE SETTINGS 8 3 Clock Settings Open the Settings gt Configuration gt Time Setting menu e Local Offset Specify the time zone where the receiver is located e Daylight Saving To apply daylight saving time specify the country where the receiver is located e Clock Mode Determine which to use between 12 hour and 24 hour clock formats For Wake Up Mode and Sleep Mode see Setting Up Timers on page 32 8 4 Audio and Video Settings Open the Settings gt Configuration gt A V Output Setting menu TV Type Determine which TV standard to use TV Aspect Ratio Determine which aspect ratio to use by default e Display Resolution Determine which resolution to use by default Tech nically 1080p is better than 1080i but the difference is only slight to most people Display Format Determine how to display 4 3 pictures on the 16 9 screen or vice versa Pillar Box 4 3 pictures fit the height of the 16 9 screen with black bars on the sides e Full 4 3 pictures blow up to fit the width of the 16 9 screen with the top and bottom edges cut off Pan Sc
44. s the play but ton to resume Skip backward or forward Press the back button 44 or the forward button gt gt 7 3 Free TV Free TV allows users to view videos from a variety of video sharing web ser vices such as Dailymotion Users can either view videos online or download them for later enjoyment 7 4 TV Use TV to watch internet TVs Tune in to a TV station Select a TV station View in full screen Press the green button To exit full screen press it again Add a TV station Press the red button Specify the TV station s details including name and web address and then select Add to finish Note The web address must include http and indicate the media itself not the webpage that contains it Edit a TV station Place the focus on a TV station entry and press the blue button Change the details and select OK to finish Delete a TV station Place the focus on a TV station entry and press the blue button Select Delete and confirm to delete it Search for TV stations Press the yellow button and enter search criteria using the on screen keyboard View information about a TV station Place the focus on a TV station entry and press the Info button APPS 49 7 5 iRadiot Use Radio to listen to internet radios Tune in to a radio station Select a radio station View radio stations in a specific category Press the red button and choose a category Add a radio station
45. se Frequency and select any available transponder 4 Choose Go to to rotate the dish so that it faces the target satellite 3 3 Scanning for Satellite TV Channels Open the Settings gt Installation gt Service Search menu Three methods are available to scan for satellite TV channels SCANNING FOR CHANNELS 23 Scanning all available transponders for every channel Scanning for multiple channels that a specific transponder carries e Scanning for a specific one of multiple channels that a specific transponder carries Some option items are used in common in more than one scanning method as follows Satellite Choose a target satellite from the list of satellites Search Type Determine which types of channels to scan for e All Service Scan for all available radio and TV channels FTA Only Scan only for free radio and TV channels TV Only Scan only for free and pay TV channels e Network Search A transponder usually has information about other transponders provided by the same satellite TV service provider It is better to turn on this option so that the receiver uses broadcast network information for faster and more precise scanning When any dish settings need to be reconfigured select Dish Setting or Posi tioner Setting to jump to the relevant menu To return to this menu select Ser vice Search Particular LNBs have an indicator light to show if the signal strength is good enough for the receiver to perf
46. t Search Mode to Manual Users need to get several details about a target transponder Frequency Choose a target transponder from the list of transponders Symbol rate Specify the transponder s symbol rate e Polarity Specify the transponder s polarization Make sure that the common options are properly configured before selecting Start Search to start a channel scan Scanning for One Channel To scan for only one specific channel set Search Mode to Advanced Each satel lite TV channel has unique packet IDs used to distinguish between channels In addition to the information about a target transponder users need to know what packet IDs a target channel uses e Video PID Specify the channel s video packet ID e Audio PID Specify the channel s audio packet ID SCANNING FOR CHANNELS 25 PCR PID Specify the channel s PCR programme clock reference packet ID This is usually identical to video PID If the video PID setting doesn t work try 8191 Make sure that the common options are properly configured before selecting Start Search to start a channel scan 26 SCANNING FOR CHANNELS 4 Watching TV Use the channel buttons or the numeric buttons to change channels When changing channels a dialog box appears showing information about the cur rent programme on the current channel such as programme title and running time Pressing the INFO button also displays the programme information dialog box The following symbols m
47. te Video Connection o i 16 INSTALLATION Insert a jack to RCA cable s jack into the A V OUT socket on the receiver then insert the RCA plugs on the other end into the TV s composite video and audio input sockets Make sure to match the connectors colours properly Note Composite video connectors cannot carry HD video 2 4 AV Receiver Connection EA Use an AV receiver for better audio quality Connect the receiver s SPDIF con nector to the AV receiver s digital audio input connector using an optical audio cable 2 5 Network Connection Connect the receiver to the wired or wireless network If a network cable is avail able connect the receiver s LAN port to the router using a network cable A If no network cable is available use the Wi Fi dongle for wireless network con nections When the receiver is off plug the Wi Fi dongle into one of the USB ports on the rear of the receiver INSTALLATION 17 A 2 Y For details on how to configure the network settings see Network Settings on page 54 2 6 Mounting the Receiver on a TV If necessary mount the receiver on the TV to save space Install the TV mount bracket on the back of the TV and then attach the receiver to the bracket as illustrated by the drawings above 4 NA Connect the remote control extender to the IR Rec socket on the receiver Make sure that the extender does not face directly into light sources such as la
48. tion When playing a recording users can use the numeric buttons to skip to a specific point With this set to Percentage Move the unit for user entered numbers is percentage For example to skip to the 35 percent point of the recording enter 35 With this set to Commercial skip users can enter 0 to 9 and the unit is minute For example to skip for ward 5 minutes enter 5 To skip backward 1 minute enter 0 TimeShift Device Determine which storage device to use for time shift re cording by default e Record Device Determine which storage device to use for recording by de fault RECORDING TV 39 6 Playing Media Files This digital TV receiver can play not only TV recordings but also many kinds of media files including photos music and videos Connect a removable hard drive or flash drive to one of the receiver s USB ports A 6 1 Managing Storage Devices To manage removable storage devices connected to the receiver open the apps screen and select Storage View a storage device s state Choose Current Device and select a storage device Format a storage device Storage devices must be formatted in FAT32 or NTFS for use with this receiver Choose Current Device and select a storage device Choose Format choose File System and then choose a file system Select Format and then confirm to start formatting Note Only a 32 gigabyte or smaller flash drive can be formatted in FAT32 Test
49. y is used for maintaining the preference settings and channel data Open the Settings gt Installation gt System Recovery menu Use these to reset the digital TV receiver e System restore to factory default Reset all settings to factory defaults and clear all channels e Reset configuration data Reset all settings to factory defaults e Reset service data Clear all channels Use these to back up and restore the receiver System restore to stored position Restore the receiver using the stored settings and channels Store system data Back up all settings and channels PREFERENCE SETTINGS 57 e Delete stored position Clear all stored settings and channels Sharing Channel Data Itis possible to share the receiver s settings and channel data with other receivers of the same kind using a flash drive Connect a flash drive to one of the receiver s USB ports Open the apps screen and select Back Up Transfer All System data to USB storage Export all settings and channel data to the flash drive Transfer Service data to USB storage Export all channel data to the flash drive Data download from USB storage Import settings and channel data from the flash drive 8 8 Updating the Digital TV Receiver Software updates for this digital TV receiver become available from time to time Software updates may improve the receiver s performance or deal with any out standing issues Open the Settings gt Installation gt

User Guide - mytiviar.nl

Contents

Download Pdf Manuals

Related Search

Related Contents