Home

EuroScope User Guide for version 3.0a

1. 2 A lt A A A Altitude Esp _ GMMWw_CTR 128 80 V Accept HO GMME_CTR 125 1 V Accept HO Auto Alt 16000 8000 18000 16000 17000 11000 10000 12000 200 7000 200 7000 200 7000 200 7000 200 7000 Callsign RAM123 RAMB55 BAW512 BAW 781 KLM322 AF714 IBE846 TAP811 RAM457 RAM158 RAMEBSS AF519 KLM721 NNNNNNNNDNO DNO QDO wo 8 ee ON FE eet e et TS 116
2. VOR NDB FIX or airport name gt xX It closes the active chat gt wait It adds a new entry to the wait or TODO list The short message will be displayed on top of the screen with the callsign of the selected aircraft The long message is optional and will be displayed in the status line if you click on the short message To delete an item from the list just doubleclick it Syntax wait lt short message gt lt long message gt lt click on aircraft gt gt wall A supervisor only command It sends a broadcast message Syntax wall lt a free text message gt gt wallop This function sends a message to all supervisors Syntax wallop lt a free text message gt 93 Available functions Functions are quite similar to aliases There are some kind of string patterns that will be replaced by the system The real difference is that in one hand their names are fixed coming from the code not from a file on the other hand the result depends on the current session rather than a fixed value A function may stand on its own or may have parameters Parameters can come from anywhere even it can be a result of another function or can be am alias parameter Functions are evaluated in the command line and in the ATIS message lines And since version 2 8h the letter by letter voice ATIS elements also use them Aliases are not forgotten but as they are extracted by typing in the command line the functions in them will be eval
3. gt Aircraft type switchable The same as above but can be switched on off in tagged up TAG gt Aircraft type category combined It is a combination of the type and the category separated by a slash Use it if you would like to hide show them at once gt Aircraft type category combined switchable The same as above but can be switched on off in tagged up TAG gt Altitude The actual altitude of the aircraft Over the set transition level it displays the value in three digits e g 310 050 below the transition level it assignes an A for altitude and displays two or three numbers e g A55 A06 A110 The A can be switched off via the General Settings dialog gt Assigned departure order When the plane is assigned to be departed soon it receives a departure order number This number is displayed in the item it is rarely used in the TAG itself but on the advanced aircraft lists gt Assigned heading Assigned heading is an attribute of the aircraft It indicates the heading given to it by the controller It can be set in EuroScope but not published via the network so far If no heading is assigned then a Static string AHDG is displayed Otherwise an H plus the heading in three digits e g H110 This item can also display the content of the scratch pad in case the content is a waypoint along the route in the flight plan from 2 8h version any valid waypoint e g VEBOS gt Assigned heading if set The same as ab
4. gt Tower 100 NM gt Approach Departure 200 NM gt Center 600 NM gt Flight Service Station 1500 NM Supervisors are allowed to set 600 NM range independently from the actual facility Important when joining to a simulator session as a client as trainee the connection mode has to be Direct to VATSIM just like with a normal connection and the simulator host has to be selected from the server list or its IP address can be typed directly Proxy connection Proxy connection Server Start Proxy Server Status The proxy connection is originally defined to allow multiple instances of EuroScope to be started in the same machine and share the VATSIM connection between them On the other hand the implementation is general so there is no restriction to one computer The proxy connection needs two parties to be set up one server and one client To start a server just press the Start Proxy Server That will start listening the 6810 port in the local machine and accept incoming connections To connect to a proxy server from another instance of EuroScope select the To VATSIM via proxy connection type change the server if different from localhost and connect When connecting to a proxy server the secondary client does not need any authentication setup as it uses all the data from the primary client The primary client then can be connected to VATSIM and both clients will work with the same rights with t
5. AIRAC AIRWAY txt gt Load VATSIM Server IP addresses ipaddr txt file exported from Servinfo gt About EuroScope current version of EuroScope The name of the currently displayed sector layout is shown here if you open more than one asr files and switch between them with F7 then the name of the actual one will here Clicking on this item will let you manually select another already opened layout The name of the currently selected aircraft will appear here Your system time is shown in UTC zulu time 39 OTHER SETTINGS This is the main settings menu for deeper changes in your program gt Save profile To save the current configuration in the current profile file gt Save profile as To save the current configuration in another profile file with another name gt Auto load last profile on startup if this menu item is checked EuroScope will load the lastly used profile file on next startup gt Auto save profile on exit if this menu item is checked EuroScope will save the current profile file when exiting gt Save all settings to save parameters that are not saved in the asr file call this item it is really important to realize that no settings are saved automatically by EuroScope you should always call this menu item to change your settings permanently for later sessions gt Save all settings as save your settings with a new name gt Load all settings replace your settings with pr
6. Do not display aircraft below Apply Do not display aircraft above Leader line g w minutes z Tag family Matias built in gt Do not display aircrafts below ft Filters all targets below the a E Airports given altitude in feets a value of 0 means filter is OFF 4 ae gt Do not display aircrafts above ft Filters all targets above the sa given altitude in feets a value of 0 means filter is OFF E High airways oe gt Leader line MINUTES MILES Set leader line to predict uL ULE02 C ULE02 TMA 0 uLeos E uLe06 O uLe10 ULG16 C ULE16 TMA E ULe17 C UL617 TMA aircraft s position in given minutes or nautical miles Minutes or NM can take up values between 1 10 or No leader line gt Tag family Select presaved TAG settings from the list Default TAG is the one used in the Matias system at Budapest ACC APP E uLe19 2 uLe20 gt Check boxes explained below Check boxes Now this is a real novelty of EuroScope by ticking you can not only switch all VORs NDBs etc s on off but by going into the tree you can switch on off practically all individual items on the radar screen Data of course should previously have to be set up in the sct and ese files Using this hierarchy tree it is quite easy to switch items on off in groups Clicking on the VOR check box all the items below this one follow its state and will be switched on or off accord
7. assignment It would look quite awful if multiple screens powered by different sectorfiles show completely different areas you are controlling and different active handoff areas to the neighbor controllers Active Sectorfile Actually the above statement is still true we can have only one sectorfile that is used to extract these data In this way even it is allowed to load several sectorfiles there is one among them that is used more than the others This is the so called Active Sectorfile When you start EuroScope it loads the last time active sectorfile before loading any ASR files If there is no information about the last active file or it does not exist the you will be prompted for the 30 sectorfile Whenever you load a new sectorfile using the Open SCT Load sectorfile command it becomes the active immediately One of the most visible information used from the sectorfile is the projection center point This point is where the display of the latitude longitude coordinates are to most precise You can easily notice that when you load a new sectorfile the projection parameters of your screen might be changed and your active radar screen is stretched When you load a sectorfile then all already loaded ASR files referencing this sectorfile will be refreshed automatically But the ones not referencing it will not be changed at all Therefore if you are loading a sectorfile that is not referenced by the currently visible ASR then it is quite no
8. functions aliases to extract information from the system necessary for the ATIS We specifically added new functions and aliases for the ATIS maker gt Satisairport The ICAO code of the airport you are serving with voice ATIS Actually the content of the ATIS airport edit filed gt Sarrrwy lt ICAO code gt This function lists all the runway names separated by commas that are flagged as active for arrivel in the Active Airports Runways gt Sdeprwy lt ICAO code gt The same for the departure airports gt Smetar lt ICAO code gt The long METAR of the selected airport gt Satiscode The current ATIS info set above The controls to be used gt ATIS maker URL edit As said above you can enter the full parameterized URL to here It will be saved along your settings gt Extracted URL edit It is just a debugging tool When you press the Test URL button then EuroScope extracts the aliases and functions from the base URL The result will be shown here in a worm it is sent to the Internet In this way you can check if all the parameters are correct and how to fix invalid calls missing parameters gt Test URL button When you press this button the original URL is extracted and the result is sent to the Internet When EuroScope receives the answer it is copied back to the Text ATIS and multiple record ATIS edit control There you have the chance to test or modify before it goes to the voice channel This button w
9. go from 0 to 100 several times then the installation is ready if EuroScope Installation Complete EuroScope has been successfully installed Click Close to exit Press the close button and go to the Start menu and under Programs you will find EuroScope current version Just start and enjoy using it If it is the first time you have installed EuroScope be sure to follow Quick start page instructions Another Important Note For Previous Release Users It seems that the in some cases the new installer is unable to overwrite the font set that was installed before That will cause some symbols missing in the new release If you experience this then go to the Windows Fonts folder Manually delete the EuroScope ttf file Then run the installer again In that case it will ask if you would like to repair or remove EuroScope from the system ie EuroScope Welcome to the EuroScope Setup Wizard Select whether you want to repair or remove EuroScope Repair EuroScope Remove EuroScope Cancel Select the repair It will now copy the right font to the fonts folder 2 1 Where My Settings Are Saved About Settings I have to regret that the saving of the different settings and setups are not really straightforward in EuroScope Please forgive me if something is not really logical or you would put some information to another place 11 The Profile Files The profile files are created to store all installation or workst
10. gt RFL this popup menu will open another popup menu that allows you to change the requested flight level altitude Important When making a simulation session alone or for a candidate setting the cleared level via the popup menu will drive the Simulated aircraft to the specified altitude 10 Exit altitude FL from the sector the coordinated altitude or flight level at the next coordination point If no such point defined then the final cruising altitude See the pictures again from the sector exit point description In the first picture no approach is online Therefore the next coordination point is the FIR exit point MOPUG The coordination altitude is FL310 there When approach is online then the coordination point is ERLOS and the coordination altitude is FL170 54 MAHIVER e B738 v MAHIVOD a B738 v AVS MOPUG N269 MOPUG o A75 ERLOS N269 MOPUG 340 318 349 176 ERLOS 19 22 ERLOS 19 23 IPL 19 49 PMIPUG 19 41 11 Assigned speed the speed assigned to the aircraft If no speed is assigned then a static string ASP If has an assigned IAS then a letter S then the assigned speed If a Mach number is set then a M then the assigned Mach With a left click you can open a popup list with the available values from 120 400 With a right click the Mach values are popped up from 0 60 to 1 00 Select the one to be used To clear it select the item with Assigned speed Mach number is propagated to other contro
11. in brackets it is not displayed if the assigned and the current squawk equals The last line contains some information about the selected aircraft the origin and the destination 3 3 7 The Command Line Prompt aD Ihbp LHBP_APP STU fon 129 700 Miklos Monoki Hungray 2006 08 06 v5 The bottom bar is called the command line As already mentioned it functions as text input bar Anything you type using your keyboard will appear down here To send a message to your 50 primary frequency hit the primary frequency send key you defined in you General Settings to send not ENTER To send text messages or give in commands use ENTER further details under Working with keyboard The right side of this bar is an info bar Clicking on screen items e g aircraft controller ATIS etc you can get detailed information On the left side the callsign of the currently selected aircraft is displayed You can deselect the aircraft with the ESc key 3 4 TAGS Default MATIAS TAGs An aircraft is shown on the screen as a radar target and an associated TAG that shows the controller relevant information on the aircraft s situation and flight EuroScope comes with the default and unchangeable Matias TAG family It really closely simulates the version used by the real Hungarian ANS s system MATIAS contains a very rich set of relevant information and is rather similar to what is also used in other real world workstations e g on Eurocat model
12. the end of each runway input until the next commented out line It will ignore short lines like empty commented out lines Once done you can copy all the lines by pressing CTRL A and then CTRL C Why do pilots not receive my message intended to be sent on my primary frequency Most probably you are not sending it to your primary frequency The reason being that primary frequency works a little different in EuroScope You should configure a PRIM FREQ key primary frequency send key in OTHER SET gt General settings by default it is num numeric star using which you may send the message directly to your primary frequency no matter if a chat was open or anything like that So bear it in mind send it with PRIM FREQ key ENTER works only in case your primary frequency chat window is selected We highly recommend to use the PRIM FREQ key always as it does not have any prerequisites 110 I have tried some VRC commands and I could not get them working in EuroScope It might be that some commands are either different or not yet implemented We have received a few requests from users asking for functions similar to those in VRC We hope to have them programmed into the next release Can we expect further development of EuroScope Yes definitely EuroScope will be developed further by its author Gergely Csernak With the help of users an initial wishlist has been created and each request bug report can be checked in our
13. 123 770 BEG LYBA CTR EUE Eurocontrol East 135 300 EE C EURE FSS EURE FSS 0200 0277 N050 54 1 002 E019 49 4 2 216 N042 40 42 169 E022 28 7 307 103 The airspace section The airspace section is the section containing information about the sectors in the delegated area and auxiliary boundary information To understand the Airspace section one has to understand the functions of Euroscope well It has a first section prefix with SECTORLINE which defines actual broken line that is common for only two lateral sectors Then the sector is built by two or more of these lines and then additional boundary information is added such as COP Coordination Points Please also take a look to the Tutorial section that describes some steps how to define the sectors The sectorline subsection Each sectorline piece is usually comprised of three sections The first line section is prefixed with SECTORLINE then separator and the name of that respective sectorline SECTORLINE MOPUG LHCC Then the declaration of that respective sectorline continues with an optional section prefixed with DISPLAY It is used to declare when that respective border will be highlighted More exactly what sectors must be covered discretely by different controllers for that line to be highlighted DISPLAY MGT MGT BUD The prefix is DISPLAY with the separator The next item is the condition for the sector you are covering In this case for this line to be ta
14. 23 LOWW V ARNEM UL620 BIRKA UZ21 OMELO UL620 KOPIT UM748 RUTOL SFPMAH1501 A 1 B738 430 GCTS 1730 1730 340 LHBP 1 20 2 0 LOWW V KORAL UG5 ESS UN871 VJF UN851 MHN UM603 ALG UL5 VALMA UL865 ANC UM986 KOPRY UY53 VEBOS SFPAZA525 A I MD87 430 LHBP 1730 1730 360 LIMC 1 20 2 0 LIRF V BAKOT UY52 SUNIS 0114 GRZ UP976 DETSA UM984 LUSIL Route description After the flight plan you should place a route description The route is a point by point list of the route the plane should follow It should not contain any information just the list of the waypoints SROUTE lt callsign gt lt point by point route gt lt delay gt lt pilot minimum delay gt lt pilot maximum delay gt lt descend to waypoint gt lt descend to altitude gt The delay here is a time in minutes the aircraft will be added to the simulation This is an optional parameter If you omit a O will be used that means join immediately The delay calculated on Simulation time only When the whole simulation is paused then the delay time is not counted The pilot minimum and maximum delay drives how fast the pilot will respond to an order For every order you make in the simulation the aircraft will respond and start following it by random seconds of time between the minimum and the maximum value The minimum is 0 the maximum is 30 seconds If you omit these parameters then a minimum 12 and maximum 17 seconds will be used that were measured by real time controllers as average resp
15. EuroScope too this type of scratch pad text will be recognized as assigned rate 55 When the aircraft is directed to a waypoint using the popup list from sector exit point then the name of the point will be visible here Important When making a simulation session alone or for a candidate setting the assigned heading will drive the simulated aircraft to the specified heading In this case it is really important to be able to turn the aircraft to the left or to the right For that the list contains the values from 360 degrees to 360 degrees from the actual heading 14 Text message the scratch pad Note that if the scratch pad is recognized by EuroScope then the scratch pad remains empty and the appropriate other item is changed On the other hand if the scratch pad is not empty a static letter I is displayed over the first line The length of the scratch pad is limited to 60 chars only but for compatibility reasons only the first 5 is propagated to ASRC and VRC clients while EuroScope clients will receive the whole length By clicking on the scratch pad area in the TAG the message itself can be edited there Tagged The tagged TAG is similar to the detailed but contains less information The following items are not visible at all gt assigned speed gt assigned rate gt assigned heading only if heading is assigned but if a direct to waypoint is specified then it is visible gt scratch pad There are also items tha
16. It draws a wide white line from the center of the radar screen to the aircraft specified as parameter The line remains on the screen for 5 seconds Syntax find lt aircraft callsign gt 89 find lt click on a TAG or AC in the list gt find lt ASEL to use selected aircraft gt gt ff fn fv fa fc fw These commands are changing the display settings from the command line The commands changes the display of the following element types in the same order FIX NDB VOR Airport Low airways High airways All works in a way that looks for all the parameter names tests if any of the components are displayed or not If any is displayed then the command hides them otherwise it displays some of them The following components are tested and displayed using this command FIX symbol and name NDB symbol name and frequency VOR symbol name and frequency Airport symbol and name Airways name and line gt fpquery A supervisor only command It sends an information request to the servers to query the controller who modified the flight plan of the selected aircraft The answer will come back as message to the server chat window The command needs a selected aircraft Syntax fpquery lt aircraft callsign gt fpquery lt click on a TAG or AC in the list gt fpquery lt ASEL to use selected aircraft gt gt getfp It sends a request to the server to retrieve the flight plan of the selected aircraft
17. It means that whenever a voice is transmitted over the primary voice channel the secondary is muted In the following dialog you can change and test your hardware 22 Voice hardware test and setup Devices Primary input hardware SiR Reta elisa Olesen T Primary output hardware Wave SoundMAX Digital Audio w Secondary input hardware Wave SoundMAX Digital Audio Secondary output hardware Wawe SoundMAX Digital Audio v I Bass filter Squelch During find squelch mode the local codec measures noise on the mic When done it sets the mic s squelch level to not transmit that noise The user must be quiet during the test or the squelch will be set way too high Primary squelch 1339 7 Find squelch mode Secondary squelch 322 7 Find squelch mode Mike test During the mic test the local codec measures input from the mic When done it returns a result code diagnosing possible problems such as the mic being too loud or quiet This routine requires that you do the squelch test first to get normal results Primary test result Test Secondary test Test Transfer buttons Primary PTT key Right Ctrl Secondary PTT key Right Shift gt Primary and secondary input hardware combo Use this combo to select the primary and secondary microphone to be used They might be the Same but can be different gt Primary and secondary output hardware combo Use this combo to select the primary and secondary
18. Messages gt Sector definition DAOO TWR SECTOR is missing in line xxxx This message appears when you make a reference to a sector in a DISPLAY SECTORLINE instruction and you have forgotten to define the corresponding sector gt Sectorline name not found in line xxxx This message appears if you make a reference to a sectorline and that you omit to define the corresponding sectorline gt Invalid line name in sector BORDER DAOO TWR SECTOR DAOO_TWR_ SCL in line xxxx This message appears if you make a reference to a sectorline in the BORDER line of a sector definition and that you omit to define the corresponding sectorline gt Invalid COORD in line xxxx This error message is generally due to a syntax error comma instead of colon May occur when you paste directly the coordinates copied after a distance command and if you forget to replace the comma by acolon To avoid it it s better to use the sline command gt Invalid keyword in line xxxx This error message occurs if you type a keyword that EuroScope does not recognize It happens also if you have an empty line with a space character TIP For finding quickly the error line one good idea is to load the ese file in Excel or in any other editor that displays the line numbers and it s easy to jump directly to it 3 13 Short term conflict alert settings dialog In this dialog you can setup in which situation a conflict alert should be displayed and also an warning sound to
19. So in VRC you can display GEO lines or not but always as a whole If you load a normal ASRC VRC sector file in Euroscope you see that V Show squawk C aircraft Ok Show squawk STBY aircraft p Number of history dots 5 CE Do not display aircraft below 0 ft Apply Do not display aircraft above 4 ft Leader line 5 y miles Tag family Matias builtin VORs C NDEs E Airports Runways izes C ARTCC high boundary Stars Sids Low airways High airways ARTCC boundary C ARTCC low boundary Geo GEO You can display GEO lines or not in the same manner than with VRC But EuroScope allows us to define sub categories in GEO lines by adding a category name at the beginning of each normal GEO line like the one below DTKA airport N036 58 51 798 E008 51 32 509 NO36 58 50 305 E008 51 32 422 white 14 And when all lines have been modified that s done very easily with Excel the Display Dialog appears like that IY Show squawk C aircraft OK F Show squawk STBY aircraft Cancel Number of history dots 5 Ca Do not display aircraft below 0 ft Apply Do not display aircraft above 0 ft Leader line 5 M miles v Tag family Matias built in Stars as CO Sids C Low airways High airways ARTCC boundary C ARTCC low boundary Geo Coastline DAAE airport DAAG airport DAAT airport DABE airport DABC airport DAQ
20. Use it if somehow you feel that the FP is not updated correctly Syntax getfp lt aircraft callsign gt getfp lt click on a TAG or AC in the list gt getfp lt ASEL to use selected aircraft gt gt inf A supervisor only command It sends an information request to the selected controller or aircraft The answer will come back as private message Syntax inf lt controller or aircraft callsign gt inf lt click on a TAG or AC in the list gt inf lt ASEL to use selected aircraft gt gt kill A supervisor only command It sends sends a disconnect message to the selected controller or aircraft and disconnects him her from the network immediately Syntax kill lt controller or aircraft callsign gt lt a free text reason message gt If the kill message is active then clicking on a TAG will copy the callsign to the command line but never executes the command automatically Only an explicit ENTER will do that gt msg It sends a private message to the selected pilot or controller Syntax msg lt controller or aircraft callsign gt lt free text gt gt nobreak Request for relief is withdrawn It changes the status of the controller back to normal Syntax break gt nobusy It clears the busy status 90 gt novis It clears the visibility centers and sets only the default one Note that it is not an immediate function as there is no way the call back you visibility centers from the server It
21. again These buttons are for the same runways as the JLS buttons You can press one of the buttons to initiate a takeoff There are some rules to be able to take and aircraft off The distance to the threshold defined must be less than 0 5 NM and must be in from of the aircraft The angle difference between the aircraft threshold line and the runway heading must be between 5 degrees gt Remove AC button it needs a selected AC This button deletes the selected aircraft from the simulation gt Heading slider and display it needs a selected AC Using this slider you can turn the aircraft to the left or to the right When the aircraft heading is the one that is desired the slider will always be in the middle So this slider is never absolute but always relative Move it to the right to force the aircraft turning right and left for left A click to the right or left side makes a 5 degree turn request while you can move to any heading with dragging the slider When you have the aircraft list selected the F1 directs a 5 degrees left the F2 a 5 degrees right turn Right to the slider there is a read only edit box It contains the actual and the requested heading Between them a gt or lt indicating the turn direction gt IAS combo slider and display it needs a selected AC Using this slider you can change the speed of the aircraft Every aircraft has a built in logic what IAS it will use The speed is directly connected to the altitude
22. and ATIS lines gt TAGS section The user defined TAG families gt SIL SEL DEP sections The definition of the advanced AC lists ASR Files The asr file keeps reference to your current Display Dialog settings It describes what items are to be displayed from the sectorfile It also contains some screen dependent settings data too Once again without the complete description some notes about the lines inside gt SECTORFILE The path of your current sector file this ASR is used for When you open an ASR it will look if the sectorfile is loaded or not If not then it loads the appropriate one gt SECTORTITLE Just a quick access to the title to show in the popup list gt SHOWC value if 1 if checked or O if unchecked Show squawk C aircraft option gt SHOWSB Show squawk STBY aircraft option gt BELOW xxxxx The value if you choose not to display aircrafts below xxxxx feet altitude your floor level Zero indicates no filter at all gt ABOVE Xxxxx The value if you choose not to display aircrafts above xxxxx feet altitude your ceiling level Zero indicates no filter at all 13 gt LEADER The length of the leader line Positive values are interpreted as NM negaive as MIN gt SHOWLEADER Indicates if the leader line should be shown as default or not gt HISTORYDOTS The number of history trails appearing for each aircraft gt TAGFAMILY The name of the tag family used generaly MATI
23. and simulator host IP addresses are read from ipaddr txt when joining to a simulator session simply the host IP has to be typed gt Status once successfully connected Connected to VATSIM is shown Understanding the rest of this section might require further explanation gt ATIS line 2 4 Since VATSIM limits the number of lines used for ATIS only 3 additional lines are available your voice channel is counted ATIS line 1 The same aliases can be used as in ASRC altim ICAO etc gt Load servers update your server list PROFILES gt Save profile This is something really cool You can save various profiles which store your callsign facility range setting and ATIS information So next time you come controlling it will take a second to connect you just click the callsign you wish to be as shown in the picture below Important The changes in the profiles are not saved automatically You should explicitly call the Save all settings function to store the profiles for your next session gt Delete profile delete selected profile gt Range set your radar surveillance range from 1NM to 600NM but remember the limits DEL GND 10NM TWR 30NM APP DEP 100NM CTR FSS 300 600NM EuroScope limits the maximum possible range setting based on the facility and the rating you are specifying These data are still higher than the values above gt Observer 300 NM gt Clearence Delivery 100 NM Ground 100 NM
24. are the followings 51 gt transfer initiates a handoff to the controller next to your sector gt manual transfer pops up another list with all the available controllers select one from the list and a handoff is initiated to him her gt release simple drops the aircraft When another controller has initiated a handoff to you then another popup menu is available the first picture displays the initiated handoff Tak M H 6 1 FP E T z F ie M i t assume FT B T T i H it t AS5lt INIT Need KEROP LWSE refyusellT N2265 KEROP LWSkK 2 0 BYR ASP ARC eso wid ASP ARC 4HDG TAT AHDG THT gt assume accept handoff gt refuse refuse handoff 2 Sector indicator indicates the current or the next sector controller When you are not tracking the aircraft it simply indicates the controller who is tracking it means no controller owns it If no owner of the aircraft at all then a left click here starts tracking it MAH21 0 BFS Ml AMTS132 AP B738 M 37t MOPUG N4 5 MOPUG LCLE a64 ERLOS N254 MOPUG OEKM TE e ee 350 170 ASP ARC When you are tracking the aircraft it indicates the controller of the next sector If no online controller who is controlling the next sector then a will appear here By right button click the controller short ID can be changed to the primary frequency EuroScope will change the ID to frequency automatically when the aircraft is within 3 minutes to the borderline You have th
25. are available gt unlimited in that case there is no limit to the number of lines in the list window The lists shrinks or expands according to the number of aircrafts gt maximum nn in that case the window has a variable size according to the number of aircrafts and expands only to the maximal size indicated by the nn parameter gt fix nn in that case the window has a fixed length and displays the nn first items By clicking on the header of a column in each list the order of the aircrafts in the list can be changed This can be saved in the setting file The second button allows you to define which item must be displayed in the strip window Full details are described below The third button allows you to display the Strip List Columns Setup Dialog and to customize the display Full explanation is given at the end of this page The Sector Inbound List The Sector Inbound List keeps track of all aircrafts that will enter your sector but are not currently inside This strip is mostly read only You can use that list only for ongoing coordination as described in Controller To Controller Communication The default order of this list is by the estimated sector entry time Ue PSSR ATYPWTCCOPN ETM PEL ETA ADEPWFRADESCOPX ETX XFL STAR E M TONDOT2 88 368 15 41 LTBAW I EHAMBEGLA12 19 368 12 86 178 I L 0 2ga j IPUGI2 2 As default the following fields are available in that list gt RUNW Assigned runway C S Airc
26. be played The short term conflict alert detector divides the world into three sectors vertically gt The first sector is from the ground until the bottom of the lower altitude area In this are there are no conflict alert detection at all gt Between the bottom of the lower altitude area and the bottom of the higher level area Conflicts in this area are detected using the values from the Lower altitude box gt From the bottom of the higher level area and up Conflicts in this area are detected using the values from the Higher level box 82 The values you should specify for both areas are the same Short Term Genii Aiert Settings Disies gt Bottom of the area The lower level altitude of the area The oo ere oi settings are used above this value FF Show lower aude sTCA gt Show STCA Indicates to detect conflicts at all or not oaea cs a m Switching them off no conflict alerts are ever fired TO E gt If vertical separation is less than The minimum vertical o a separation for the alert If the separation exactly the number specified 7 Show higher level STA no alerts will be fired Sees gt If horizontal separation is less than The minimum horizontal separation for the alert It is advised to be higher than the separation minimum to allow the controller to react to the alert 3 14 Extended centerline setup Let us start fro a picture with the result before going into details how you can conf
27. below 3 4 1 TAG editor TAG families In EuroScope the TAGs are not fixed at all It is up to the user what he she would like to see on the radar screen To define your own TAG displays you should add and edit TAG families You should define each member of the family then you can assign the whole family to the layout settings ASR files TAG family is a set of four TAG definitions Each must be completely defined before using the family The members are as follows gt Untagged This is used for aircrafts that are not considered by the controller This type should be as compact as possible but should contain information enough to provide safe separation In EuroScope a doubleclick on the TAG will tag it up or down gt Tagged This is the normal TAG used for aircraft tracked or considered It contains far more information therefore needs a little bit more space Yo can not tag down TAGs that are tracked by you or a handoff initiated to you All the rest can be down In the real life Matias system even the concerned aircraft TAG can not be moved to down but as we have a smaller screen I let it be switched on or off So if you are a real fun of Matias never let it go down gt Detailed This is something really unique in EuroScope Even if the Tagged up TAGs can contain more information still has something that is not necessary always but handy to have it very fast For that 57 a Detailed TAG member is invented When you are mo
28. below where you can overwrite them Record content edit 24 It is a free text that describes the content of your record It is up to you what you write here but in some cases it will be part of your text atis gt File name edit The name of the file to save the recorded voice If the file extension is wav then it will not be modified otherwise a atis extension will be appended automatically gt New button If you press this button a new record description will be added to the list Both the record content and the file name should not be empty to create a new item It is not necessary for the record content to be unique but file name should not be repeated gt Delete button It simply deletes the selected item from the records list It also deletes the file associated gt Modify button It changes the selected item in the record list by the content of the edit boxes gt Start recording Stop recording button When you have an item selected in the record list just press the Start recording button to record the message or part of it When the recording is in progress then the title of the button changes to Stop recording To stop the recording press it again If the dialog is reopened and the record file exists then this button is disable to avoid accidental overwrite of you records In this case press the Unlock to enable rerecording gt Unlock button This button is used to enable rerecording of files See the previous bu
29. bug tracking system http www euroscope hu Mantis view_all_bug_page php How can I group FREETEXT items I see it is grouped in Default group now I would prefer to toggle them in several groups Default group appears when a line of FREETEXT is not named in the ESE file or the there is a typo Here is an example of the proper format N062 13 09 998 E028 03 56 002 VFR fixes VUORI NO060 19 02 300 E024 57 18 000 EFHK taxiways Z LATITUDE LONGITUDE GROUP FREETEXT How can I get in contact with the author to report bugs ask for help etc Best way is to use the support forum where not only the author but member of the support team and many users might lend a helping hand Feel free to participate in the discussions at lt a http forums vatsim net viewforum php f 71 In what time interval does EuroScope update simulated traffic in offline mode or for traffic outside radar range The position update for simulated aircraft fully offline or outside visual range is executed in every 60 seconds The planes are grouped and updated by this groups to avoid 1000 position update in a Single second The VATSIM statistics data is downloaded in every 10 minutes If it is older than 20 minutes then it is not used 9 Tutorial Introduction To This Tutorial In that tutorial I am going to explain in details the important things to take in account for building an ese file The complete ese file can be downloaded a
30. but a 20 KTS is added randomly The JAS combo defines how the speed will be assigned to the aircraft gt IAS free It means that the aircraft will define its speed as described above gt IAS In this case the speed will be exactly the one defined by the slider gt IAS IAS gt The same as above but it leaves the speed only when the free speed is higher The slider work the same way as heading But here the position of the button is absolute You can vary the speed between 120 and 320 KTS A click to the slider makes a 10 KTS change You also can use the F3 and F4 buttons to change the speed After the slider you can see the actual and the desired speed Between them a and v indicates accelerating or slowing gt Altitude slider and display it needs a selected AC Using this slider you can drive the requested altitude of the aircraft Remember that we do not simulate air pressure All the simulation works as there were standard pressure all the way Therefore all altitude values can be defined in feet The slider itself works the very same way as heading slider but it is once again a fixed position Slider that works between O and 41000 feet A click to the slider makes a 500 feet change You also can use the F5 and F6 buttons to change the altitude After the slider you can see the actual and the desired altitude value Between them a and v Signs indicate if the aircraft is climbing or descending All aircraft will follow a pr
31. device name gt output hardware the primary speaker headphone device name gt output _hardware2 the secondary speaker headphone device name gt PPPT the primary push to talk button code gt SPPT the secondary push to talk button code gt squelch the value measured on primary mike gt squelch2 the value measured on secondary mike Important note As you see from the above list your last session user name and password is in the profile file And they are there without any encryption Therefore be very careful and DO NOT give send share your profiles to anyone else Settings Files This file contains several different kinds of settings You can open them with a text editor to learn more since there are many parameters most of them being self explanatory We are not going to specify every single line in this file just some words about the groups gt settings All lines beginning with m_ are the general settings You can change them via the Quick Set menu or one of the settings dialogs I suppose the names here are really readable gt SYMBOLOGY section Here you can find the values from the display settings dialog It describes what colors sizes line styles to be used for the map display gt VOICE section Your ground to air voice communication setup The registered voice connections are saved here gt PROFILE section The login profiles from the connect dialog It contains the callsign facility range
32. edit box The addition is that for every single character modification the route is compiled from the string and the extracted point by point route is displayed in the list control below There you can see all waypoints the airway to that waypoint and a comment about the airway usage If the aircraft is flying then the estimated time of arrival is also calculated for every point along the route There are two other buttons that works immediately and not when saving the dialog gt Set squawk It assigns the squawk value to the aircraft If the field is empty the a new squawk is generated based on the controller position gt Set temp alt It sets the temporary altitude 81 3 12 Message dialog The dialog i System is starting up D Loading symbology settings from D EuroScope Settings txt file O Loa ing sectorfile from D EuroScope Hungary_ 05 10_ v58 sct file s z z eooo eae This dialog shows you whenever an error occurs on loading leah E oe rere some necessary files or data It will automatically appear er CR ESR Ee HCE when loading a file fails but it is also available through the AIRAC Cycle 0613 21 DEC 2006 17JAN 2007 Rev 1 D Downloading http vatsim metacraft com satnet data txt mM e n u Ot h e r S etti n g S gt M e ssa g e d i a l O g In this example loading the sector file has failed the window popped up after starting EuroScope Some Common Error
33. every sector It works the very same way as Defau t except that it uses an alternate ownership hierarchy If the selected alternate name is not defined for a sector then the Default will be used instead gt A position It is also possible to assign a sector directly to a controller In this case if the controller is online he she will own the sector but if off line there will be no alternate owner The controls can be used as follows gt Sector list It displays the actual assignment One can select one or more sectors from the list The combo box bellow will follow the ownership name of the selected sectors If different rules are assigned then there will be no selection there gt Change ownership combo Using this combo it is possible to change the ownership role The combo box contains the Default the Alternate role names and after them all Position definitions from the ESE file The selected value will be assigned to all sectors gt Select all To select all sectors from the list gt Select none To deselect all sectors from the list gt Save Using this button you can save the ownership setup to a text file This file can be published e g for a flyin and reloaded later gt Load To load a previously saved configuration 4 Working with keyboard While EuroScope can be used by simple mouse clicking still there are a lot of things where keyboard makes our life much easier As they can speed up the work there are se
34. finds a matching one all other SECTORs are not tested at all This property can be used to create overlapping SECTORs but in that case you must be sure that the smaller one is the first in the list That is the reason why we have in the SECTOR part the airports then the five inner FIRs then the neighboring FIRs Note the SECTORs for GMMM_CTR and North_ Africa Control are not defined There is no need to do it since they are deduced from the hierarchy of the other sectors EuroScope deduces the area of the bigger sectors by looking at the hierarchy in the OWNER instructions and by adding or substracting sectors accordingly And here is how your scope looks like when GMMM_CTR is on line as well as GMMM_WEST_CTR and GMMM_East_CTR Note the two simulated controllers in the Simulator training dialog and how they appear in the controller list in the top right corner of the screen The two areas of GMMM_West_CTR and GMMM_East_CTR have been substracted to the GMMM_CTR whole area black active zone when these two controllers went on line Note the red lines of handoff between the different zones Note also the simulated aircrafts of the scenario file around Casablanca airport 115 satan OMMM_CTR ZE 25 500 C ser CMMM 23 51 15 SET set 4 cta GMMM_cT saf EMG Roof sep c fien ws 35a sl 17A 17L Resum Direct ll Restart Route a Se a ee Newt Skip Ac status Pause Go Takeoff Eai Eas Ka 17L Femovear F
35. followed by the lower altitude limit in feet 34500 then the upper altitude limit in feet 66000 The next line is prefixed by OWNER and defines which controller will be recognized ad controlling that respective sector and their priority After the separator will follow a list of position identifiers from the Positions section The first has most priority and the last the least priority For example if MGT position is identified as online by the Positions table the MGT sector will be assigned to it If not it will move on to the next position verify it and if it is open the sector will be assigned to the BPT sector This line also defines which sector you will be controlling when you are online as a specific position The alternate owner line ALTOWNER makes it possible to define an alternate order of the sector ownership The alternate rules can be selected at the Sector ownership setup Its syntax is the same as the OWNER line but needs a name in front Next follows the Border sector in which you define which borderlines make up the sector Make sure a borderline and the next borderline have the end start points common so it will be able to create a continuous border Also make sure that it is a closed border that is that the last line ends at the start point of the first line The order of the sectors in the file is extremely important EuroScope will check if an airplane is inside a sector in the order defined in the file Therefore
36. headphone or speaker to be used They might be the same but can be different gt Bass filter check box If checked the built in bass filter is enabled Sometimes it sounds better easier to understand if only higher frequency voice is transmitted But check it out yourself gt Find squelch mode buttons When you press the button keep silence for about 5 seconds During that EuroScope tests the background noise of your system You should test your system squelch value before using voice connection gt Test buttons After pressing the mike Test button speak normally for about 5 seconds During this period EuroScope tests the difference between your silent and normal speaking voice level You might test to change the volume level of your mike based on the test result gt Set buttons The Push To Talk buttons are used to transmit voice to the connected voice channels It is not necessary but highly recommended to set different buttons for primary and secondary voice transmit 2 3 Voice ATIS Voice ATIS makes it possible for the pilot to listen to the actual information of the departure or arrival airport also on voice rather than just reading it in few lines they used to receive when tuning in to a controller s frequency This is a major step to bring the simulation closer to real life EuroScope is supporting this feature from the beginning To enable a second voice channel connection that can be tuned by pilots you need a second VATSI
37. in EuroScope and at the time of writing this documentation EuroScope is the only controller that are prepared for it Unfortunately it has a back draw that you can not use this when the other party did not use EuroScope In this case some features are still available but not all To realize who is able to use the coordination features look at the controller lists 68 FO ATG SOU a X All controllers who are ready to answer is flagged by a gt gt sign You can expect answers from them to your coordination requests There are three different scenario when you can use ongoing coordination gt Exit point altitude coordination when you are tracking an aircraft and you would like to suggest a different point or altitude to the controller of the next sector gt Entry point altitude coordination when you are expecting an aircraft to enter to your sector and you would like to suggest a different point or altitude to the controller who is currently tracking it gt Bypass coordination when you are expecting an aircraft to enter to your sector but for a too short time and you are aware that it will does not require any instruction from you then simple offer a handoff to the controller after you to the current owner From the above list it is visible that the first two cases are always in pairs If you would like to coordinate the exit point altitude the it is a coordination of the entry point altitude for the next controller And opposi
38. in simulator section Logging and playback To save your current session and play it back later is just as easy with EuroScope as pressing two buttons Logging and playback Logfile F EuroScopeLogs EuroS cope2008031 2 txt Browse Start logging Playback ier Whenever you have an active session direct or simulation simple select a file name in the Logfile edit and press Start logging From that moment all data around your session is saved to the selected file Even your primary voice communication is saved to a file with the same name and an additional vvl extension When finished just press Stop logging Important Your authentication information is never stored in the file so that you can send it to others without publishing your password But everything else is stored there so all your private chat communications can be played back later If you have a saved session just select connection mode Playback log file and select the file name to the Playback edit box When you press the Connect button the file will be played immediately With the speed buttons you can make the playback faster You can pause and restart the playback with the Pause and Stop buttons The voice data is stored in the logfile in 30 seconds splits Whenever a new split is to be played it is copied to a new file and its playback is started So that when the speed of the playback is not normal the voice will be played at normal speed but par
39. like the normal way to join to the VATSIM but type your trainers IP address as the server You can also collect IP addresses and write down to the ipaddr txt to have them in the list Connect dialog Select connection mode DiecttoVATSIM VAT SIM connection Callsign LHEPAPP Facility Approach Departure gt Real name Adam Orban Rating Contoller Certificate 905953 Server FEAE Password pee Status Hit Connect set up you voice connection for a non used channel like pracite_Ihbp Also be sure to setup your primary frequency and connect to the voice channel Be sure that the frequency of the voice channel is the same like the corresponding ATC facility you are going to practice If you forgot to set it up you could not use the features of the EuroScope connected to this setting The self training mode 96 There is not too much to setup for a self training mode As in this case you are alone you do not need ad voice server connection But to identify the station you are controlling select the appropriate voice description and set your primary frequency In this case the name of the voice communication will be used as your callsing Therefore if you would like to use all the features of EuroScope select the right primary frequency The traffic control panel When you start the simulator session the main control panel pops up The simulator is running as far as this dialog is opened When you close it the se
40. list Here in this list you can see nearly all the information about the all the aircraft Most of the columns are really self explanatory Probably the second column St needs some comment It shows the aircraft status weather it is P paused or S simulated For a faster selection the list contains a hidden first column Here only the numbers from the callsign is stored The list box can search for its first column data when you type letters or numbers In the picture abouve if the list box is on focus and you type 2254 the SWR2254 will be selected After that you can use the buttons F1 and F6 for fast drive 6 Tower View The tower view feature is inspired by the similar possibility of VRC by Ross Carlson But actually the implementation is totally different in EuroScope Due to the built in simulator there is already a small FSD server inside EuroScope This server can be also used to be connected by an FSD pilot client like SB3 or FSInn Using this idea the tower view implemented in EuroScope is based on the FSD protocol rather than an FS multiplayer connect After some test and support request we decided to us FSInn http www mcdu com en index php as the FSD client for EuroScope tower view There are some reasons why FSInn was selected and SB3 is dropped gt FSInn can be used in other networks not only on VATSIM Because of that it did not need any kind of modifications to connect to the built in FSD server On the other hand SB2 tests if
41. on converging tracks would require further attention in order to keep the separation between them With this you can predict what the minimum distance between these planes would be and when exactly this situation would happen 42 LHBP 30007KT Q1027 LBP VRBOZKT Q1027 SHORT METAR SEND SCREEN TO NEXT DESKTOP MINIMIZE TO TASKBAR ol fe MAXIMIZE RESTORE WINDOW 3 3 2 Basic Lists The Controller List To display the short metar of an airport press F2 type the ICAO code of the airport and hit ENTER this is equivalent to command QD XXXxX in the text input If a new METAR is received from the server it will be shown in orange to draw your attention By cliking on it acknowledging it the color will change to white and also the complete metar is displayed in the status bar If the place is long enough to show the full metar string then it will be displayed instead of the short version If you have to display more station data at one time you may run out of space for them actually it is not a too big area In this case with a right click you can loop over the displayed metar data A doubleclick will remove the clicked metar just as F2 and ICAO code This button is hidden unless you have a multi monitor system Users with 2 monitors can send the screen to the other monitor using this button The standard Windows minimize to taskbar button This is once again the standard maximize restore Windows button But a l
42. on line Ground positions Displays ATIS stations on line ATIS positions Displays OBS stations on line Observers positions Displays unidentified stations on line Non identified positions conomapoan For each position the following items are displayed in the Controller list 1 Ground to ground communication status 2 Ongoing coordination flag indicating that the controller uses radar client that is ready for ongoing coordination 3 The position identifier as defined in the ese file 4 The complete callsign The color of the controller means gt yellow normally gt pink when leaving shortly gt white when no position update in the last 30 seconds and they are assumed to be disconnected With a left single click on any position in the list a detailed data is copied to the message area With a doubleclick you can open a chat window with the controller With a right click a special popup menu appears that shows the following items gt Listen to frequency using this item a normal voice connection to the controller s frequency is added to the voice dialog where only voice receiving is selected In addition you can set transmission manually gt Leave frequency to quickly disconnect from the controllers main frequency channel Get ATIS this item calls for the actual ATIS of the controller the answer will be shown as private message in the chat area gt Intercom it starts a bilateral com
43. owner will be called for coordination gt The controller who is tracking the AC has the right to change the next controller Clicking on the sector indicator item he can select the appropriate controller from the menu If the next controller is forced in this way EuroScope will start coordinating with that controller independently from the sectors detected Entry Point Altitude Coordination Let us now see the very same example from the approach point of view ae ae ee ane e ae Ea ae FE ATG SOU a PSSR ATYPWTCCOPN ETN PEL ETA ADEPWFRADESCOPX ETA XFL STAR SI ASSE BU LHCC_CTR MAHS8S 1888 BFS6 M VEBOS 28 25 176 LEMDW I LHBPCOFX 360 VYEBOSSR BU 1eea8 or BA ST TAL Fha NEEDS ae M TEE 3 EU B7367 M 258 WEBOS N AA LHEF Saf 17i Now approach sees the arriving traffic that is currently tracked by CTR For some reason it would be better for approach to ask CTR to send the plane direct to BP437 point rather than VEBOS and also he wants it to descend to 4000ft altitude First he opens the COPN point popup list on the TAG or on the sector entry list whatever is the easiest and requests BP437 E EA OUR a a A RUNN CY PS5R ATYP WTC KFT KFT UPS S A ADEPWFRADESCOPX ETX XFL STAR SI ASSR BU LHCC CTR Silo MAHSE 3 lege B736 M GRZ a MPS LEMO I Ol 388 VEBOSSR BU 1888 GOTSE eet OLATI UyY5s VWEBOS UYS8 BP44a VEBOS3R BP439 VYEBOSSR BP438 VEBOS 3R Era y iT FL1S0800 BF437 VEBOSSR B
44. positions with EuroScope the controller s work becomes much easier it will be discussed below in details You may ask how does Euroscope know all this The programming is surely very sophisticated but the division and handling of sectors is always the competency of VACCs and controllers So once they are agreed on and most VACCs have been smartly using airspaces it has to be loaded to the software so that it knows all the vertical and horizontal sector information Since other VATSIM controller clients did not have this airspace handling capacity technically these sector definitions are put in a separate ESE file So EuroScope uses two files to determine your sector 1 the earlier used SCT files and 2 the new ESE files This may sound complicated but don t get scared it is a one time issue or only at AIRAC changes and in fact it makes life easier The philosophy of EuroScope is to integrate all airspace information of a VACC into one SCT and ESE file if you switch controlled sector in your VACC a different airspace is lit up and you don t have to reload SCT files Therefore VACCs are expected to take care of updating the sector information so that controllers can use them easily The complete definition can be found in the Airspace section of the ESE files description page Please consult it how you can define your sectors You can define any number of sectors for one sectorfile Each sector may have a hierarchy list that defi
45. reduce the size of the TAG gt Ground speed without N The ground speed of the aircraft just the numbers gt Ground speed without N switchable Same as the previous but can be switched off by the controller to reduce the size of the TAG gt Ground status The status of the aircraft in the departure sequence The following values can be selected and displayed here gt PUSH when pushback is approved gt TAXI when the plane is taxiing gt DEPA when the plane is about to be departing gt Handoff target ID 60 The ID of the controller who has is targeted by a handoff request This item is used rarely now as the Sector indicator does this work also gt Hijack indicator If the aircraft is squawking 7500 then a static HIJ string Otherwise empty It is inside the code even this squawk is not permitted on VATSIM gt Manual coordination flag A telephone symbol that indicates when something needs to be coordinated with an adjacent controller who uses a client that does not support the ongoing coordination feature gt Next line It is a special item It never displays anything but starts a new line in the TAG TAGs are always left justified gt Next line if not empty The same as the previous but it starts a new line only if the current line is not empty Using this you can be sure that no empty lines are displayed in the TAG gt Non RVSM indicator When an IFR plane that does not indicate RVS equip
46. route and active runways gt Callsign The callsign of the aircraft It is never empty and most cases used as primary main item see later gt CLAM warning The stand alone Cleared Route Adherence Monitoring warning A static CLAM string when the pilot does not follow the altitude restrictions gt Clearence received flag It indicates if the plane has received the clearence flag or not gt Collision alert indicator This item is normally empty But if short term conflict alert is switched on and there are two aircraft too close to each other then a CA is displayed by this item gt Communication type The type of the communication the aircraft is able The well known t or r will be displayed Note that v is never displayed by EuroScope as voice is the main form of communication in VATSIM If the plane is voiceable two SPACE chars are displayed to have a place to popup the communication type menu If the type can not be extracted from the remark field a is shown gt Communication type reduced The same as the above but voice communication is really empty there In that case it will not be possible to popup the selection menu from this item We suggest using it on the tagged type but not in the detailed gt Compound warning item This item combines the following warning flags in this priority order gt Emergency indicator 59 gt Radio failure indicator gt Hijack indicator gt Collision alert gt Squa
47. same way as and exit or entry point coordination Once he has accepted the new next controller is displayed in the sector indicator item F L1 906000 3 4 General settings General settings dialog General settings dialog Keys OK M J Aircraft select key Num i i Cancel Primary Frequency send key Num Squawk options WTC symbols Squawk interval 2600 2677 Light L Medium VFR squawk 7000 V Assign random squawks Heavy H 4380 Display options Display airspace lines V Show route when accepting Show CLAM warnings V Display FIX name at route points Lock show route when accepting M Show RAM warnings Display ETA at route points V Rotate texts along the route Never close FREQ chat Miscellaneous options Assume aircraft onthe ground as STBY V Use calculated heading V Show 4 for altitudes Allow concerned aircraft tag down Auto Proxy connections V Show 500 Ft items For non VFR Allow assumed aircraft tag down Keep scratch pad content after direct Inhibit auto Flight strip push on handoff Automaticaly display METAR of active airports Use hovering TAG For key commands vV Auto messages For TEXT aircraft Set active APT by owned sectors Capitalize FP fields and scratch pad v v Coordination options T Do not use accepted coordination color M Put incoming coordinations to first place Do not use refused coordination color Allow direct beyond COPX point Who is online URL http va
48. squawk code sending by the aircraft As it is never empty it is once gain a good item to be primary gt Squawk error indicator This item is normally empty But if the squawk sending by the aircraft differs from the assigned Squawk it displays an A then the assigned squawk E g A2602 gt Squawk callsign This item shows the squawk of an aircraft unless it is tracked Then it changes to the callsign of the aircraft This is very handy to create tiny compact TAGs gt Static string It is up to the designer If you need a static string in the TAG you can add an item like this and specify the text itself EuroScope does nothing with it just displays gt Temporary altitude 62 The assigned temporary altitude If not set then the assigned final altitude is displayed Above transition level it is displayed with 3 digits e g 170 050 below the transition level it is displayed with an A followed by two or three digits e g A50 A100 gt Temporary altitude if set Same as above but hidden if no temporary altitude is set gt Temporary if different from sector exit The temporary altitude if set and if different from the sector exit Otherwise it is empty gt Tracking controller ID It is the ID of the controller who is currently tracking the aircraft It is no more used since the Sector indicator is developed gt TSSR text It is a simple static text but built in For non squawking aircraft display gt Two letter as
49. squawking IDENT then this special 4 legged icon with text saying SPI Special Position Identification indicates its position timeout When there is no position update for 30 seconds the sign of the aircraft changes to Also referred to as coasting targets no primary radar sign When an aircraft is out of the radar range visibility range but its position and flight plan is available from VATSIM Statistics WEB site EuroScope is able to simulate its predicted position Its sign is a diamond 37 3 3 Radar screen Layout of the screen We might divide the screen into 3 sections gt Menu bar the upper menu bar is fixed yet some of its items might be turned on off gt Main screen the main screen is the operational part of the radar screen Thus its layout can be modified to your own taste gt Command line the lower command line is used as text input and single click info bar Menu bar On top of the screen you can find The Menu Bar O sT FL comect 3 199 998 A Ser LHBP_APP_31 22 06 07 Ser ser OG NOT 100 e GND UNL HEHU Main Screen When mentioning main screen we have to think about the radar screen itself We are not going to go into details concerning radar screen in this section rather focus on parts of the screen which are not related to the radar itself The documentation of those elements are divided into the separate functions of the main screen s elements gt The Basic Lis
50. successful connection to the network without any problem However if you miss them you will not be able to use all the features of EuroScope gt Outgoing connection When you are connecting directly to the VATSIM or any simulated session hosted by EuroScope you will go out on port 6809 You should allow outgoing connection on this port to reach external servers gt Built in simulator When you are hosting a simulator session then EuroScope binds the 6809 and waits for incoming connections In that case you should open this port to enable incoming calls When you are behind a router you should forward this port to your workstation Note The tower view feature uses this port too If you are to run the Flight Simulator on another machine you need to open this port gt Ground to air voice communication When you are joining to a voice room the connection is made via UDP port 3291 This port should be opened for outgoing connections When you are accepting landline voice calls you will use this port as well gt Ground to ground voice communication When you initiate a landline voice call and the remote controller accepts it then the remote computer will try to reach your computer UDP port Therefore to be able to initiate landline calls you should open UDP port 3291 for incoming requests When you are behind a router you should forward this port to your workstation gt Proxy server Normally you use the proxy server for internal commun
51. that were copied to your computer by the installer It includes the original settings the ICAO airlines and airports files and also the FSNavigator database files It also deletes the ASR files that were provided for the LHCC sectorrfile If you have saved any configuration to these files or updated them manually or downloaded a newer AIRAC database then be sure to SAVE THEM to another place before running the installer Installation Installation of EuroScope is really easy Just download the MSI file from any of the sites and run it Then follow the instructions of the installer Well the only thing you should specify is the folder you would like to put the files The main download site is the home of Euroscope This server is located in Hungary Thanks to Ross Carlson and Metacraft Internet Services we have two mirror sites They are both located in Dallas Texas Mirror sites my not be available until the installers are copied there After selecting Install the installer will download the package installer and run it Download from EuroScope home server http euroscope hu install EuroScopeSetup msi or gt Download from Mirror 1 http vatsim metacraft com es_mirror EuroScopeSetup msi or Download from Mirror 2 http es_mirror metacraft com EuroScopeSetup msi Prerequisites The installer requires that you have NET framework 2 0 installed on you computer The MSI will prompt for if you do not have Installation Proce
52. the center point of the display Syntax dcenter lt object gt Where object can be anything vor ndb fix or coordinate The coordinate can be defined by clicking in an empty place by mouse gt distance available as toolbar icon The distance command shows distance between two objects or points on the radar screen When this command is active then pressing the mouse button on a TAG or on an AC in the list its callsign goes to the command line as parameter If you click to a position where nothing can be found than the coordinates are copied to the command line If the first parameter is specified then moving the mouse displays the distance data from the selected point to the cursor If the first selected object is an aircraft and the second is not then the distance and the time needed for the distance will be displayed Otherwise only the distance Syntax distance lt objectl gt lt object2 gt distance lt objectl gt lt angle gt lt distance gt Where object can be anything aircraft vor ndb fix or coordinate In the second place not only an object but an angle distance pair also can be entered In this case it will be calculated as relative to the first The distance data is also displayed on top of the screen To remove a distance line make a doubleclick on this text line gt distance2 The same as before but displays the heading data too gt find Using this command you can find an aircraft on the radar screen
53. the first match will be used and the rest is not tested at all You can use this behavior and create overlapping sectors But be sure that the Smaller is earlier in the list ACTIVE LROP 08R As default all sectors are active and are used in your session However you may define sectors that are not always used just in some runway configuration After the ACTIVE keyword you should define the airport and runway and this sector will be used only is the specified runway of the specified airport is active for arrival or departure An example is the Traffic Director in Hungary He has the role to move the planes from downwind to the final and used only on real busy events Because of its role he controls at the arrival end of the active runway But as the runways have two ends we defined two Traffic Director sector but only one of them should be used in one session GUEST APP LROP LROP The GUEST line is a formal way to handle exceptions to the general roles After the keyword you Should define a position a departure airport or a for all airports and a destination airport or a for all airports When an aircraft is flying in this sector and its current owner is the controller defined in this line and the departure and the destination airport match the flight plan then the sector owner will be the current controller This may be a special solution to a normal situation over Slovak airspace Normally this area is controlled by Prague but the a
54. the server has a valid VATSIM ID and do not connect to other places nor to EuroScope gt When I asked for technical assistance for the feature Benjamin Fells immediately responded to me and advised my all the information I needed Unfortunately I have not receive even a negative answer from the SB3 team if we can work together Prepare EuroScope For Tower View Actually you should not do anything in EuroScope side It automatically asks fro the plane information that is necessary for the correct display It is asked even if no tower view is started All this information is also sent to the LOG files It makes it possible to enable the tower view feature on online sessions and on playback sessions too In this way you really do not have to do anything Just connect to VATSIM for an online session or start a playback session In both cases EuroScope automatically starts the built in FSD server and waits for an incoming connection from FSInn When the connection is established all plane information is sent to the FS client Prepare FSInn Fro Tower View Be sure to download and install the following products from MDCU gt FSCopilot 1 6 http www mcdu com redirect php id 58 gt FSInn 1 2 http www mcdu com redirect php id 57 gt The appropriate VIP package for you FS 100 In Flight Simulator start the Copilot Inn Control Panel menu Click on the SET button and navigate to the Network settings There are 5 slots first is V
55. the way it founds them in this list gt Tag item type combo With this combo you can change the selected item in the list gt Value editor This editor is available only if a free text item is selected In this case you can write the string itsef to here gt Primary item check box The primary item plays an important role in the TAG definition The line from the aircraft position will point to the center of this item If the primary item is not visible then no way to connect the TAG 66 with the aircraft position and you will be lost So select an item the is always visible squawk callsign TSSR etc Of course only one primary item can be defined for one TAG It mark is an M letter in the Flags column gt Need separator before check box This check box indicates the a space will be added before this item if the current line is not empty so far That makes it a little bit easier to have some spacing between items gt Left and right button function combo With these combo boxes you can define the function you would like to have when clicking on the item It is available only for detailed TAGs gt OK button Nothing to say Saves your edit and closes the dialog Some tests are executed before saving the TAGs and you may receive error message if something is wrong e g no primary item selected for a TAG gt Cancel button It closes the dialog and discards all changes yo have made gt Add new family button It in
56. to the ESE file see below Only one little information was missing from the original sectorfile that was not worth putting into the extension file That is the airport code of the runway items in the RUNWAY section But to be able to put the runway names into the hierarchy we needed the name of the airport to be defined too Therefore it is put to the end of the line like this The original line looks like this RUNWAY 13L 31R 130 310 NO47 26 43 520 E019 15 27 180 N047 25 22 620 E019 17 37 880 Modified line RUNWAY 13L 31R 130 310 N047 26 43 520 E019 15 27 180 N047 25 22 620 E019 17 37 880 LHBP Ferihegy That can be a free text not necessarily the airport code This string will be used in the Display settings dialog and also it will collect the runways of the same name airport into one subtree As we tested this extension will not cause any harm for ASRC and VRC users ESE file description What is the EuroScope Sector file Extension Look for it in the ESE files description section 101 Scenario file The Scenario file section belongs to the built in simulator 7 1 ESE files description ESE SDK documentation The standard sector file and position file does not provide enough functionality so a new format has been developed called ESE This file includes information about controller positions callsings and frequencies in the POSITIONS section standard departure and arrival routing in the SIDSTAR S section additional sta
57. used instead From this point only the name of the lastly used profile file and two flags to indicate auto load and auto save of the last profile are stored in the registry The rest may be removed Going into details about the profile file As the data here came from the registry it is structured like the registry entries First the section name after that the key itself In the file the following information is stored gt Last Session section It contains data about your last EuroScope session They are one by one related to the filelds in the Connection Settings The only exception is the ATIS airport and letter that is used in Voice ATIS dialog gt atis airport the airport served by voice ATIS gt atis letter the last time used ATIS letter in your airport gt atis2 atis3 atis4 the text ATIS message lines numbered from 2 as the first is always your voive channel description gt callsign the connect callsign gt certificate your VATSIM ID gt connecttype a code how you connected last time gt facility the facility of the last session gt password the password entered Important your password is stored in this file without any encryption Due that you MUST NOT give your profile file to someone else gt playback the last playback file with full path name gt range the visual range of the last session gt rating your rating gt realname your real name gt scenario the last use sim
58. used by EuroScope in simulation mode for the simulated controllers 8 Eighth and ninth parameters Not used 9 Tenth parameter Start of code squawk range used for that position 10 Eleventh parameter End of code squawk range used for that position 9 2 SECTORLINE Definition Now we are going to define the different SECTORLINEs we will need in our area We will make difference between internal and external SECTORLINEs An internal SECTORLINE is a SECTORLINE located inside GMMM area An external one is located on GMMM periphery and is adjacent with a neighboring FIR So on the picture below you can see how we defined all these SECTORLINEs LPPC2 Casa_Oceanque 124 5 GMMN_GMMW Casa Ouest 128 8 GMMN_GMME Let us now see how a SECTORLINE is defined and take the example of the separation line between Casablanca Oceanic and Casablanca West 1 SECTORLINE GMMO GMMW SCL 2 DISPLAY GMMM O CTR SECT GMMM O CTR SECT GMMM W CTR SECT 3 DISPLAY GMMM W CTR SECT GMMM O CTR SECT GMMM W CTR SECT 4 COORD NO30 48 17 299 W014 13 33 264 113 5 COORD NO35 57 32 923 W009 39 27 732 1 The first line contains the name of the SECTORLINE We had it the suffix _SCL to identify it immediately when reading 2 The second line defines the conditions for this SECTORLINE to be displayed Its general format iS DISPLAY paraml param2 param3 where all parameters are SECTORs and NOT identifiers from the POSITIONS s
59. will be searched in the record content and the matching record file will be concatenated Therefore it is highly recommended to have record for every letter and every number Finally the created file starts playing back in an endless loop As the content of the edit box is compiled just when pressing the button you are free to edit not only the free text parts but the bracketed parts too But be careful to provide a string that matches one of the records If not you may receive several error messages like No matching record item On the other hand the content of the Text ATIS and multiple record ATIS will be used as text ATIS message just the s and s will be eliminated from it In this way in one editor you can build you voice and text ATIS in one single step The special controls once again gt Insert item button It copies the selected record item into the editor It will be placed to the actual cursor position If there is a selection then it will be deleted gt Start multiple record playback button It examines the content of the edit box concatenates the voice files and also starts the endless loop playback External ATIS Interpreter A really new innovation in the voice ATIS is that EuroScope enables external ATIS interpreter tools to be used To use such a tool you should specify a well parameterized URL that will be called from EuroScope The URL should be entered to the ATIS maker URL filed Here you can use all the
60. would like to use VATSIM voice servers during your simulation session you must authenticate yourself against the network To do that you should first login to VATSIM Direct to VATSIM mode In this way your identity will be checked and you will be able to connect to any VATSIM voice server We suggest to set up you voice connection for a non used channel like practice_Ihbp Then disconnect and start your simulator session When you disconnect your voice channel connection will remain for 30 seconds then disconnects But if during this period you start your simulator the voice channel connection will not be disconnected Connect dialog Select connection mode Start simulator server Direct to VAT SIM VAT SIM connection To VATSIM via prow Callsign LHEP_APUELETESII Eee ny Playback log file Real name Adam Orban Fating Certificate 905953 Server Password Status Then you have to set the scenario you want to use for this session Simulator server Scenario C Euroscope Scenario_LHEP tel Browse The scenario file contains the traffic for the simulation The structure of the file is described in the Scenario file page Jut hit Connect to start the server Important To allow the trainee to connect to your server you must open port 6809 for external access If you are behind a router you even have to forward this port to your computer The trainer candidate mode Candidate setup Set up your connection just
61. you it is possible to toggle the leader line of a given aircraft by right clicking on an empty section of the detailed tag Clicking with the right menu button a popup list appears that allows a quick setting of the leader lines You may set the type of leader line depending whether time or distance vector you prefer at the moment Also by clicking on the numbered button left click to increase right mouse button to decrease you can set an exact length for the vectors Toggle history trails for all aircraft Small dots symbolize the previous positions of the aircraft This tool comes handy when you would like to turn on the radar tags for aircraft that are squawking STBY This is just a reminder of the actual transition altitude for you Set the values with your left and right mouse buttons left click to increase right click to decrease Below FL100 the levels can be adjusted by 500 ft above FL100 by 1000 ft You may set an interval open or closed in which you want traffic to be displayed Default value is GND UNL which means that all traffic is shown on the radar A smart tool for measuring distance and time checking radials headings coordinates etc This button calls the distance command which can be followed by callsigns fixes etc Selecting the points can be done either by typing the points or by selecting them on the radar by a single mouse click Use separation tool if you are not sure whether two aircraft
62. 195 this aircraft never enters to my sector at all just to approach 34 DLH3446 LK 738 v 237 RUTOL N429 RUTOL LHBP 199 GB 21 93 DLH3446 I 199 SULUS UZ65 ODNEM UM748 RUTOL 738 EDDF LHBP A438 G429 LOW 346 V EDDF Frankfurt Rhein Main Germany LHBP Budapest Ferihegyi lt Hungary Notified an aircraft that is still far away but if follows the flight plan route will enter to your sector Note that approach has left therefore I am controlling that sector too DLH3446 738 380 RUTOLONSSPRRUTOL LHBP 348 19 NEMe2 48 I 349 SULUS UZ658 ODNEM UM748 RUTOL EDDF LHBP LOWW 340 Vi Frankfurt Rhein Main Germany LHBP Budapest Ferihegyi Hungary Coordinated in real world this is a very important state indicates that the neighbour controllers are agreed how the AC will be handed off As there are no such tools in VATSIM all Notified aircraft become Coordinated 15 minutes prior entering your sector 35 DLH3446 LK 738 w 245 RUTOL N433 RUTOL LHBP 245 199 AS WIOL 20 59 M540 20 54 RBP 225 M0 59 BP534 21 00 DLH3 446 3 245 SULUS UZ658 ODNEM UM748 RUTOL 738 EDDF LHBP A436 6433 LOW 346 Y EDDF Frankfurt Rhein Main Germany LHBP Budapest Ferihegyi Hungary DLH3446 LK 738 v 225 RUTOL N424 RUTOL LHBP 199 4 a Transfer to me initiated another controller initiated a handoff to me DLH3446 FT 738 vo_ 221 FAPS N422 RUTOL LHEP 1a 25 Assumed you
63. 2007 VATSIM controllers were presented with a ground breaking new ATC client the EuroScope A state of the art ATC software that combines features learned from real life radar software and years of online virtual controlling experience EuroScope set the standards of controlling environment to new heights The innovative display and handling of controlled airspaces fully customizable aircraft tags the projection and planning of flights and radar display details or the built in simulator are just a few of EuroScope s features without which more and more controllers could not imagine controlling anymore Over the last 6 months software designer Gergely Csernak continued development work on EuroScope based on feedback and wishes of users The new version 3 0 arrives now again to provide VATSIM controllers with brand new functions and advancements of existing features such as Advanced coordination functions with upstream and downstream controllers agree or disagree with altitude and cleared waypoint suggestions with just a click of the mouse Who controls which aircraft and where have never been as clear before Tower view mode see the aircrafts you control with the built in FsInn client Customizable SID STAR and Runway selection make the exact route of flights clear for yourself and downstream controllers New automated checks EuroScope will monitor the aircraft s adherence to cleared altitude and route CLAM RAM New shared
64. AS built in gt WINDOWAREA param1 param2 param3 param4 The geographic coordinates in degrees of the bottom left corner and of the top right corner of the scope It is important that even if you do not change any settings just zoom in and out and pan this value is most likely to be updated In this way it is quite normal that you will be prompted at nearly all ASR close to decide weather to save or cancel the update of the area gt individual sectorfile elements Then follows the list of all your checked items in the display dialog You can not save the SECTORLINE and SECTOR elements as they can be switched on just for debugging purposes and not for next session display Sector Files Sector files are the files which contain all information about the area you want to control EuroScope can use the same sector files as ASRC or VRC There are two places where you should or can modify them The first is the Runway section It is described in the Quick Start page too You should modify this to be able to display and use the runway data inside EuroScope Original RUNWAY 13L 31R 130 310 NO047 26 43 520 E019 15 27 180 N0O47 25 22 620 E019 17 37 880 Modified to RUNWAY 13L 31R 130 310 N0O47 26 43 520 E019 15 27 180 N047 25 22 620 E019 17 37 880 LHBP Ferihegy There is another option for the GEO section In a ASRC VRC sector file GEO lines appear like that NO036 58 51 798 E008 51 32 509 NO36 58 50 305 EH008 51 32 422 white
65. ATSIM but 4 are empty that can be configured Select a free one from there and fill in the fields General Network VAT SIM Tower Met Label Tower Server localhost Azores nice Net None Aw TS WL 75 VA mode FSFDT TS VA Mode UBL Peer To Peer H Aircraft ONICOM Channel UNICOM Freq 122 800 Yorce ATIS URL Connection Standby ZFSINNYJ The ID and the Password fields here are not important as you are already connected to VATSIM with EuroScope We suggest to use a name something like Tower or Tower View The only really important is to select the server If you are running FS on the same machine where EuroScope has been started just specify localhost here But you are free to start the tower view client on another computer in your local network The rest of the fields are once again not important When ready and EuroScope session is running online or playback just click on the newly named server and enjoy the view Notes gt If you disconnect from your EuroScope session the FSD server is also stopped You need to reconnect after the new session is started gt You should not use PAUSE or SLEW mode in FS as in these cases the display of the moving aircrafts are really jerky 7 Appendices Sectorfile modification EuroScope uses the very same sectorfile as ASRC or VRC If you have one just open it and use All the extended description of your sector all additions are put
66. EuroScope Y3 VATSIM RADAR SCOPE lt GERGELY CSERN K N EuroScope Users Guide For version 3 0a 15 03 2008 Table of contents About EuroScope 1 Quick start 1 1 Installation 2 1 Where My Settings Are Saved 2 Get connected 2 1 Connection settings 2 2 Voice communication setup 2 2 1 Voice hardware test and setup 2 3 Voice ATIS 2 4 Connection features 3 Going into details 3 1 Multiple Sectorfiles 3 2 Sectors and aircraft states 3 3 Radar screen 3 3 1 The Menu Bar 3 3 2 Basic Lists 3 3 3 Advanced Lists 3 3 4 Distance Separation Tools 3 3 5 The Chat Box 3 3 6 Flight Strip 3 3 7 The Command Line 3 4 TAGs 3 4 1 TAG editor 3 5 Controller To Controller Communication 3 4 General settings 3 7 Display settings 3 8 Symbology settings 3 9 Sounds setup 3 10 Active airports runways 3 11 Flight plan setting dialog 3 12 Message dialog 3 13 Short term conflict alert settings dialog 3 14 Extended centerline setup 3 15 Sector ownership setup o 11 16 16 20 22 23 29 29 30 31 38 38 43 46 48 49 50 50 51 57 67 74 77 79 80 80 81 82 82 83 84 4 Working with keyboard 5 Built in simulator 6 Tower View 7 Appendices 7 1 ESE files description 7 2 Scenario file 8 FAQ 9 Tutorial 9 1 POSITIONS Definition 9 2 SECTORLINE Definition 9 3 SECTOR Definition 85 95 100 101 102 106 108 111 112 113 114 About EuroScope In September
67. F436 WEBOSSR Enter name r A controller can open up the COPN coordination menus only if the plane is controlled by someone else and it is going to enter to his sector later Here you can see that there is no signal what controller will be called as an entry point coordination is requested from the current tracker of the plane Approach here selects BP437 and the value is signaled in both clients MEE BU Br367M 250 BF437 N OO LABP 300 170 APP view 72 MIASSaS AF BFSse6 H 258 BP 45H CHEF 350 178 h CTR view Now CTR has 90 seconds to respond Let us change the scenario a little bit Approach still has an option To start the altitude coordination before receiving the answer to the point request He simply open up the COPN altitude list and select a new requested altitude Then both requests will be shown in both clients simultaneously APP view MaHoSs AP B736 M 258 BR437 NOOR LHBP 350 B48 CTR view In this case CTR has the option to accept or refuse them with a single click Bypass Coordination This is a little bit different scenario It is not symmetric at all We have now a departure from LHBP The active runway is 13L for departure In this case the standard exit point for north bound departures BADOV at FL180 FS Secor hond LE ax FOATG S00 u ax AUN CS PS5R ATYPWTLCOPH ETN PEL ETA ADEPWFRADESCOPX ET SI ASSR BU LHCC CTR a LK LKAA CTR K ETIE LE B7362M GHE 125 BADOYE NOHO BaDOY EDHN ca
68. FL the actual altitude or flight level of the aircraft Below transition altitude an A letter is followed by two or three digits the altitude value in 100 feet A50 or AOS or A115 Above transition altitude the flight level is displayed with three digits 050 or 380 The actual altitude flight level value may be followed by an arrow pointing up or down The arrow indicates the altitude change direction climb or descent With right button click it toggles the route display of the aircraft 5 Sector exit point the next coordination point along the route The coordination points are defined in the EuroScope Sector Extension file see ESE files description If a controller owns both sectors of the coordination point then that one is ignored and the next one will be displayed In the first picture I am Budapest Radar and no approach is online Therefore the coordination point over ERLOS is not active as I control both sectors Only the FIR exit point MOPUG is effective But in the second picture Budapest Approach comes online Therefore coordination point ERLOS becomes active HAHAA BY3sa y PATA oo BSB AYS MOPUG Nebo MOPUG O A 75 ERLOS N269 MOPUG 3 40 314 3 40 170 ERLOS 19 22 RRLOS 19 23 MADR To 32 MAL 13 33 ROPUG 19 49 MOPUG 19 41 By a left click on this piece you can start an entry or exit point coordination with the previous or the next sector controller Detailed information about the ongoing coordination
69. FL200 and above are not marked with AP as NBC AP approach controls up to FL195 and a higher altitude will not drive the SLAF l i I AP plane to his sector at all In this way it does not need any coordination A35 The same is visible if the altitude is 3500ft or lower In this case 3g EuroScope detects a path from present position to BP437 that leaves E CTR sector before enters to APP sector as CTR bottom level is FL100 amha h Therefore no controller is indicated for coordination When the CTR selects the altitude it will start a coordination It is also indicated at approach like this MAH SoS B736 M 250 N ee LHEF 350 BF437 The way to accept refuse and change is the very same that was described at the next point coordination 71 Some notes gt If CTR decides that he do not want to coordinate but set the direct on his own discretion he can select the point name in the list by a right mouse click In that case it will set but not coordinated gt If the plane is still outside the visual range of the APP the coordination will be refused immediately and a generated message is sent to CTR LHBP_APP ES generated MAH583 is out of my range gt When you start an exit point altitude coordination EuroScope will connect the plane actual position with the requested new position with a straight line Along this line it will detect what sectors are crossed And the first that is outside the sectors of the current
70. Gs remain down You will see that moving the mouse over a TAG like tis will not get the detailed TAG Syntax seeall gt selcal It sends a SELCAL call for the selected aircraft You may enter code manually or allow EuroScope to detect it from the flight plan remark section When manually entered then no can be entered just the four letters without separators When the code is not explicitly specified then the remarks field is scanned for SEL or SELCAL strings and extracts the code from the following letters If EuroScope fails then an error message is displayed Syntax selcal lt CODE gt lt click on a TAG or AC in the list gt selcal lt CODE gt lt ASEL to use selected aircraft gt 92 gt sep available as toolbar icon It displays the separation data between two aircraft This function calculates the closest point of two converging aircraft current path It displays the minimum distance and the time they need to reach that point If the paths become diverging then the display shuts down automatically The separation data is also displayed on top of the screen and can be switched off by a doubleclick on that line sep lt aircraftl gt lt aircraft2 gt gt sline The most useful command for an ese file developer It collects successive geographic coordinate points in the clipboard in a ready to be pasted form in an ese file To use it type sline in the command bar and Enter Then LEFT click on every point you wan
71. Holopainen for collecting and converting all the aircraft data for EuroScope Tobias Reimann for creating a EuroScope extract function from his ICAO airlines database http vatdb tr media org All the beta testers Once again they helped me a lot to fix bugs implement the right functions you need for everyday controlling Credits For v2 9 Eric Bocaneanu Who always believed that we can make a client that can be accepted by VATSIM governors He made all the discussions advertisements to start the beta testing EuroScope He also helped me a lot in testing writing documentation and making suggestions gt Peter Selmeci Who created the initial WEB site redesigned my awful WEB pages He helped in testing writing and finalizing the documentation and also with lots of new ideas gt P ter Selmeci and Ivan Rado For the name EuroScope gt Attila Abraham and Adam Orban They made a really strong pressure on me to develop EuroScope to the good direction They also helped me a lot in testing gt Dani Vertesy To help me writing the documentations among others gt Ivan Nagy Who registered euroscope hu domain for me without any cost so far Todor Atanasov Who created the final WEB site Ross Carlson and Ben Supnik They helped me a lot how to make EuroScope VATSIM compatible I received immediate support when I had any technical question about the FSD protocol or VATSIM voice library Ross made the bet
72. I seconds to decide what to do with the request He can click on the 258 apti 9 CHEF Sag ay ARC desired new point to answer to the call S005 Change Accept To accept the coordination as it is When accepted AP Refuse To refuse the coordination at all When the coordination is refused the values are turning back in both sides to the original state And depending on the symbology and settings it is once again flagged by a different color oe Change When approach is ready for a shortcut but the offered e CERTES point is not the best for him he can select the Change option EP439 YEBDS3R Then a popup menu appears with the available other options BP438 VWEBOSSR Selecting an item here will start a new entry point coordination with EF437 VEBOSSR CTR BP 436 VEBOSSR ed VEBOSSR BPS3s4 VWEBOSSR EP533 VEBOSSR BPS32 VEBOSSR Entername hal OK we have completed the shortcut coordination But you can still some pictures above that even the new point is BP437 the coordination altitude remained FL170 that is far too high at that point When CTR realizes it it can offer a lower level altitude He can click on the sector exit altitude item coPxat L In the list there are the possible altitude values All are followed by the Ae oe ID of the controller that will be called for coordination You can see that A6OC APY FL170 is not flagged as it is the so far accepted value and it does not 15 CAF need any coordination
73. I used both rw liveatc net and rw bostonartcc net to indicate that you can use as many different voice servers as you like But remember that rw bostonartcc net is dedicated voice server for KBOS controllers Dialog controls gt Name edit In this control the actual name of the ground to air connection is displayed and can be modified The name is just a pure attribute not used for anything just for user information Therefore it can be completely free string like Budapest Radar or Ferihegy Tower But when you are offline and select a primary frequency it will be used as your login callsign And to be able to match the sectors associated with the callsign it is a good idea to use the same name as the desired real callsign E g LHCC_CTR LHBP_TWR It is not necessary to have unique names As it is just a list you can define the values as you wish 20 When you log in successfully with a callsign then EuroScope searches for the callsign here in the name fields and also the channel name fields Once a match is found then selects that voice communication setup as primary frequency and connects to the voice server automatically gt Frequency edit Here you can define the associated primary frequency The value entered here will be sent to the network if the definition is selected as primary frequency gt Server edit The name or the IP address of the voice server So far not possible to define ports gt Channel edit The voice channel
74. LS amp par 1 amp info atiscodeslyp 2 Extracted URL http vacchun hujtd esmetar php tlcond 100 1013 110 amp metar LHBP 201718202 20 Test URL Automatically generate new ATIS using the URL Close All the files necessary for the ATIS playback should be placed into one directory At the top of the dialog box you should specify the descriptor file This file contains all the information about the records you have and also defines the folder to be used If you start the system at the first time it is possible that you receive the error message that the atis descriptor file can not be opened In this case create an empty folder and create the descriptor file there The voice atis setup is an exemption to the not saving anything rule Any click in this dialog any change in any data will be saved immediately to the descriptor file The commonly usable controls gt Browse the descriptor file This button opens a file create dialog box to specify a new folder and descriptor file AS normally you will create new descriptor file this is a create file dialog And so it will warn you to avoid file overwrite if you select an existing file but it will open and read the content instead gt Records list The top list contains your records The amount of records you need depends on the way you would like to use the voice atis When you select an item in the list the record content and the file name will be copied to the edit boxes
75. M connection with its primary frequency set Before setting up a voice ATIS station make sure to read the relevant part of VATSIM s Code of Conduct or see the Member Policy change about duplicate connections at VATSIM forum This second connection is rather restricted You can not specify your callsign freely It is required to have lt airport ICAO code gt _ATIS eg LHBP_ATIS Because of that restriction you can not define the whole callsign only the airport code you are serving with voice ATIS 23 The _ATIS postfix will be added automatically by EuroScope see the Connection settings page When you select LHBP as the ATIS airport then your second VATSIM connection callsign will be LHBP_ATIS There is no way to alter this callsign and it is also required that the selected airport be defined in you sectorfile When you make a secondary ATIS connection you will probably see yourself back in the controller list as _ATIS To set the primary frequency of the secondary connection go to the Voice communication setup dialog and select the appropriate definition as ATIS frequency It will define the primary frequency and the voice server plus channel There is one more restriction the channel name must be the Same as you secondary callsign So if you are going to serve LHBP with voice ATIS then be sure to define a connection that has LHBP_ATIS as channel name As in the primary connection by selecting the ATIS frequency and voice server you are not yet
76. ORLINE n gt The vertical limits are in feet The identifiers are taken from the fourth parameter in the POSITIONS lines and are set in hierarchical order in the controller positions So we have the following hierarchy GND then TWR then APP then TMA if any then CTR then FSS 114 LPPC2 LPPC3 LECM1 ecm asa_Oceanique 124 5 GMMN_GMMW Casa Ouest 128 8 GMMN_GMME Casa_Est 125 1 GMMM_GMMS GCcc1 Let us take the example of Casablanca West We amp 8217 Il define the first line as following since this CTR is controlling from surface to FL600 SECTOR GMMM W CTR SECT 0 60000 OWNER GMMMW GMC AFN BORDER GMMW_GMMS SCL GMMN GMMW SCL LECM1 SCL LPPC3 SCL GMMO GMMW SCL GCCC3_ SCL In the second line we set Casablanca West Control then Casablanca Control then North Africa Control in that order in the OWNER instruction Then in the third line we start from the most southern point the separation point between GCCC2 and GCCC3 SECTORLINEs and we add all the SECTORLINEs in a counterclockwise manner it will work same if we use a clockwise manner So we have GMMW _GMMS_SCL GMMN_GMMW_SCL LECM1_SCL LPPC3_SCL GMMO_GMMW_SCL and GCCC3_SCL The loop is closed And we define all the other SECTORS in a same manner BUT BE CAREFUL All SECTORs MUST be defined from the smaller ones to the bigger ones since EuroScope is searching if an aircraft is inside a SECTOR in the order defined in the ese file As soon as he
77. Q airport DAUG airport DAUH airport DAU Airport DAUZ Airport DTKA airport GEO GMFO airport GMME airport RYSM Y Free Text bas So you can easily filter which kind of GEO lines appears on your screen and this avoids overwhelming screen with unuseful features NOTE When sector files have been customized for EuroScope they can t be used anymore with ASRC or VRC So before customizing a sector file for EuroScope don t forget to keep an original version for ASRC VRC users In fact the name is only needed in front of the first line of each subsection For example the following GEO section works fine GEO Red triangle N000 00 00 000 E000 00 00 000 NO00 00 00 000 E000 00 00 000 N060 00 00 000 E020 00 00 000 NO70 00 00 000 E030 00 00 000 redcolor NO70 00 00 000 E030 00 00 000 NO60 00 00 000 E030 00 00 000 redcolor N060 00 00 000 E030 00 00 000 NO60 00 00 000 E020 00 00 000 redcolor Yellow triangle NO00 00 00 000 E000 00 00 000 N000 00 00 000 E000 00 00 000 N062 00 00 000 E024 00 00 000 NO66 00 00 000 E028 00 00 000 yellowcolor N066 00 00 000 E028 00 00 000 NO62 00 00 000 E028 00 00 000 yellowcolor N062 00 00 000 E028 00 00 000 NO62 00 00 000 E024 00 00 000 yellowcolor In EuroScope you will get the two triangles selectable in the Display Settings This section will also work with ASRC and VRC The NO00 00 00 000 E000 00 00 000 coordinates in the lines where the names are would not be needed for ES but since both ASRC and
78. VRC seem to disregard those lines completely it s better to put coordinates in there that aren t something you want to display If you pout the name in front of each line works in ES but it will not work with the other clients But if you use the above way then the same SCT file could be used with the other clients without any problems Sector File Extension Files This section is here just to make this page complete The content of the sector file extension is described in the ESE Files Description page and also there is a Tutorial about how to build an ESE file from scratch 15 Runway Files The runway files are saved along the SCT files with the same names and the RWY extensions They are also TEXT files There you can find information about the acitve airports and runways of your last session when the SCT file was used as main sectorfile ACTIVE AIRPORT LHBP 1 ACTIVE AIRPORT LHBP 0 ACTIVE RUNWAY LHBP 31R 0 ACTIVE RUNWAY LHBP 31L 1 ACTIVE RUNWAY LHBP 31L 0 There are two different kind of lines here gt ACTIVE AIRPORT It describes if an airport was active in the last session The last 0 1 digit means if it was active for departure 1 or arrival 0 gt ACTIVE RUNWAY The same for runways It describes if a RWY of an airport was active in the last session Of course here you also have the airport name and the final number means the same 2 Get connected Connection settings To learn how to set up the conn
79. a test possible and updated my beta test members regularly Richard Stefan and Navigraph FMS Data Support They allowed me to pack the FMS data with the installer of EuroScope If you need to update the AIRAC cycle visit http www navigraph com for the latest release Always download the version for FSNavigator 4 X gt All beta test members They tested EuroScope in different environments and surely in different ways Many things that I would have never thought were discovered by them And they also helped me writing this documentation gt All VACCHUN members Who was not part of the beta test team still helped me a lot on testing VRC and ASRC compatibility questions 1 Quick start Installation The step by step instructions are available in the Installation page If You Have A Previous Release Installed It is very important that the new version saves all data in files instead of the registry When you first start the new release you have the chance to import the registry content into a file Please read the documentation about it in the Where My Settings Are Saved page What you see gt Sector file selection When you start EuroScope for the first time it will ask for the sectorfile to be used Select the appropriate for your position Use the one for LHBP if you do not have any other or simply use a sectorfile you have been using with ASRC or VRC gt Radar screen configuration Normally EuroScope saves your display se
80. able by pressing F8 This function changes the temporary altitude of an aircraft If no altitude data is specified then it clears the previously set temporary altitude Syntax qq lt altitude in 100 feets gt lt click on a TAG or AC in the list gt qq lt altitude in 100 feets gt lt ASEL to use selected aircraft gt 91 gt quit This function leaves the system Syntax quit gt qx available by pressing F4 It is used to drop track or initiate handoff to the next controller Important that a simple qx without any additional parameter will drop the target as in ASRC but initiates a handoff to the next controller defined by the sectors and the logged in controllers If you would like to handoff the aircraft to a specific controller then type the short normally two letter ID before defining the aircraft If an aircraft is displayed as tracked by someone but assumed that it is false type a ok after qx In this way EuroScope will clear the owner flag of the aircraft and asks the system if someone is tracking it If it is so then it wil return to tracked state in a second Syntax qx ok lt controller id gt lt click on a TAG or AC in the list gt qx ok lt controller id gt lt ASEL to use selected aircraft gt This command can be executed by pressing the F4 key when the mouse is over an opened TAG and therefore the detailed TAG is visible In this case it is executed immediately no ENTER or click on TAG is requ
81. ackets are shown Voice setup similar to VSCS in ASRC Select text voice frequencies for receiving transmitting Voice hardware setup PTT selection etc Primary frequency status is shown on the icon gt Headphones are orange receiving gt Microphone is orange transmitting gt Red cross the voice subsystem is not initialized mostly due that a second instance is started and no voice function is enabled Your primary frequency is displayed here To change it go to the voice communication setup It turns orange when you issue a break command for a position relief Your voice ATIS compiler can be found here Letter of the actual ATIS will be shown here Once your voice ATIS is running its frequency will be displayed on the right side of the ATIS designator gt Reopen your last opened sector layouts asr files gt Open open an existing asr file gt Close close the actual asr file gt Save save changes to the actual asr file gt Save As save the actual asr file with a different name gt New create a new asr file gt Load Sector File load your main sct ASRC sector file gt Load Aliases alias file txt same format as ASRC alias files gt Load ICAO Airlines data data file to decode ICAO airline codes ICAO_Airlines txt gt Load ICAO Airports data data file to decode ICAO airport codes ICAO_ Airports txt gt Load FSNavigator data FSNavigator data file for the actual
82. aft gt Open flight plan dialog 64 This function opens up the flight plan setting dialog box This function is always available even if someone else is tracking the aircraft But in that case you will not bale to save changes made in the plan gt Open ground status popup list This function pops up a list with the possible ground states PUSH TAXI DEPA to be assigned It has no real meaning to add this function other than the ground status item gt Open handoff popup menu This function pops up a menu that allows you to start tracking to drop track or initiate a handoff to another controller There are several cases when different items are displayed in this menu gt The plane has no owner In this case you can start tracking it by selecting Assume Here Refuse has no meaning gt A handoff is initiated to you In this case the menu contains items to Assume or to Refuse the handoff gt You are tracking the AC Then this popup menu the Drop track and the Manual handoff is always available Selecting the first item will drop the aircraft tracking while the second will pop up another list that contains all online controllers within range If the sector file extension is prepared and so the next sector can be detected and the controller is online then a simple Handoff menu item appears that will initiate a handoff to the controller calculated by EuroScope gt Open next controller popup list This function opens a list w
83. an do it using the QgQ F8 command or via the appropriate popup menu In EuroScope there are special values to clear an aircraft for ILS or visual approach which disable the CLAM warning 67 gt Final altitude assignment Different final cruising altitude assignment It is important to notice that the Qz F5 altitude assignment does not modify the flight plan It is published using controller to controller messages only gt Scratch pad string The free text area for adding notes up to 60 characters In addition to that the scratchpad is used more heavily inside EuroScope For more about it see the Non Standard Extensions page gt Squawk assignment The squawk assignment is somewhat different It is published between controller clients but the servers are also storing some information about it Flight Plan Amendment A little bit more advanced but the flight plan amendment is still just a data propagation There are two different ways to do that gt Simple FP editing You can change all parts of the flight plan using the Flight Plan Setting Dialog gt Automatic FP change In EuroScope there are new functions that are using the flight plan amendment gt SID STAR assignment When you assign a SID or STAR to an aircraft its flight plan route section is amended to hold the information about it It is visible to all controllers but EuroScope clients will interpret it automatically gt Departure arrival runway as
84. apae Faa Connect Close Playback Select connection Select connection mode Directto VATSIM VATSIM connection Directto VATSIM To YATSIM via proxy Start simulator server Callsign LHCC_CTF l Playback log file 1 First of all you have to select a connection mode gt Direct to VATSIM normally connect to VATSIM network To VATSIM via proxy connect to VATSIM using a proxy server gt Start simulator server be the host of a simulator session Playback log file playback a recorded ATC session The rest of the connect dialog is divided into these 4 sections VATSIM connection VATSIM connection Callsign lt Facility Approach Departure v Real name Gergely Csem k Rating Controler3 Certificate 904331 Server UK Password eea Status a ATIS line 2 Budapest Approach Load Servers ATIS line 3 LHBP ATIS on 132 37 Save Profile aTISine ote Profile Range d se This part of the window has fields that must sound familiar to you gt Callsign desired callsign PETER_OBS LHBP_TWR EURE_E_FSS etc gt Real name your full name as registered on VATSIM gt Certificate your VATSIM controller ID 6 digit numeric gt Password your secret password gt Facility category of ATC service you are to provide Observer Tower Center etc gt Rating your VATSIM controller rating Studenti Controller3 Supervisor etc 17 gt Server list of servers VATSIM
85. are controlling the aircraft Note the sector indicator already indicating that the next controller I will handoff the aircraft will be Ferihegy Tower abbreviation used is FT As the aircraft is within 3 minutes time to the next controller the sector indicator automatically changes to display the next DLH3446 118 10 738 v aie ceeniiece Luce controller frequency 734 925 Pa 36 Ney Ne AAS FAPS 7348 825 DLH3446 118 16 738v N 69 LHBP AAS FAFS A38 G25 Transfer from me initiated when I initiated a handoff to the next controller DLH3446 118 196 738 N269 LHBP Redundant when the aircraft is still inside your sector but the next controller is already tracking it Non concerned just to close the sequence as the aircraft leaves your sector and will not come back its state changes to Non concerned again The one we have started with Radar connection states There are three different ways an aircraft may be identified on the screen COPx L HEF 298 398 WAHS1s6 Tapy 166 i HIG AHG BAWA3I Afdt FAPS N 350 25 ASP v AGG THY1884 310 MOPUG N4451 310 2108 ASP ARC AHOG E 168 ASP ARC ee eee LHEF eet RE 25 yy rr Soo MOPUG LTBA squawk stand by If an aircraft is not squawking C then there is no sign at the aircraft position squawk C If an aircraft is squawking C then a rectangle indicates its position squawk ident If an aircraft is
86. ation dependent information They are not intending to be moved from one workstation to another as there are full paths video card size information there too The profile files are just plane textfiles it is quite common for EuroScope with the extension PRF You can put them to any place in your workstation The good thing about saving these data to a file instead of the registry is that you may have as many configurations as you need All profiles are completely independent from the others except if they are referencing to the same files The name of the profile file can also be used as a command line parameter for EuroScope In this way you can setup as many shortcuts desktop icons as you need and start the right configuration with a doubleclick If you are version 2 9a user then you may noticed that several data is stored in the registry under My Computer HKEY CURRENT USER Software Csernak Gergely EuroScope From version 3 0 all this information is moved to a profile file If you run version 3 0 for the first time while you have saved data in the registry EuroScope will detect and prompt to load the data saved in the registry EuroScope od 2 No last profile file name found in the registry Shall I load old profile data from the registry If you accept then it reds the old data from the registry Be sure to save your newly loaded profile to a file just after loading it from the registry If you decline then the default values will be
87. avior It can be done by assigning functions to TAG items Each TAG item may have a function associated with the left mouse button click or the right works for middle too mouse click The functions are available only on the detailed TAG You can assign the following functions gt Accept manual coordination This function needs to be assigned to the Manual coordination flag to confirm the manual coordination and hide the manual coordination flag itself gt Edit scratch pad string This function adds a text entry box to change the text in the scratch pad It is not available if someone else is tracking the aircraft gt Open assigned heading popup list 63 This function pops up a list with the possible heading values to be assigned It has no real meaning to add this function other than the assigned heading item This function is not available if someone else is tracking the aircraft gt Open assigned MACH popup list This function pops up a list with the possible mach numbers to be assigned It has no real meaning to add this function other than the assigned speed item This function is not available if someone else is tracking the aircraft gt Open assigned rate popup list This function pops up a list with the possible climb or descent rate values to be assigned It has no real meaning to add this function other than the assigned rate item This function is not available if someone else is tracking the aircraft gt Open ass
88. can be found in the Controller To Controller Communication page 6 Ground speed the ground speed of the aircraft The format is a letter N then the ground speed value By clicking on it with the right button you can toggle its display in the Tagged TAG 53 7 FIR exit point the coordination point along the route where the aircraft leaves the actual FIR The definition of the FIR exit point is similar to the sector exit point By clicking on it with the right button you can toggle its display in the Tagged TAG 8 Destination the ICAO code of the destination airport A left button click on this item opens the Flight plan setting dialog where you can amend the flight plan By clicking on it with the right button you can toggle its display in the Tagged TAG 9 Clared altitude FL the altitude or flight level cleared to be reached That is actually the temporary altitude in VATSIM A left click on this item opens a popup menu with a list of the altitudes and flight levels from ground to FL610 If the aircraft has cleared flight level then it will be selected Just select one and it will be assigned to the aircraft There are four special elements in this popup list CL APP select this items to indicate that the AC is cleared for ILS approach gt VAPP select this items to indicate that the AC is cleared for a visual approach gt this selection clears the temporary altitude setting the final as cleared
89. cleared for lower 75 gt Show RAM warnings RAM stands for Route Adherence Monitoring It is displayed when the AC is out of the 5 5 NM fixed value and no settings so far range of the route calculated by EuroScope Here are also some exceptions 1 RAM is not displayed on the ground 2 RAM is not displayed if the AC is cleared for approach 3 RAM is not displayed when a direct is set or has assigned heading gt Miscellaneous options gt Assume aircraft on the ground as STBY Simulate STBY mode for all aircraft on ground even if they are squawking C gt Allow concerned aircraft tag down Normally when an aircraft status is notified or coordinated you can not close its TAG down for more information about aircraft statuses look at the Sectors And Aircraft States page If you select this option you will be able to close the TAGs in this state gt Allow assumed aircraft tag down Normally you can not close down TAG that are tracked by you This option allows you to do it gt Use calculated headings If this option is checked then EuroScope will calculate the heading of the aircraft based on the actual and the previous points received In this case the leader line will show the actual track heading If this option is off then the true heading reported by the aircraft will be used to display the leader line In case of high winds that could be really different from the route gt Auto Proxy connections The Proxy Connectio
90. connected You should enable voice receive and transfer to the voice server That makes you connected and also starts the voice transfer when necessary Do not be afraid of receiving voice from the channel it is never connected to your speaker and will not disturb you Common setup Voice ATIS Setup Dialog ATIS files descriptor C Program Files EuroScope atis_demo ExampleatisFiles txt Browse Record content File name a 0 O wav 1 l way 10 10 way 13L 13L way 13R way 2 way 3 wav 31iL way 31R way 4 wav v Record content touchdown New File name touchdown waw Delete Start recording Start single record playback Modify Text ATIS and multiple record ATIS Insert item Listen playback LHBPinfoJA observation at 1820 ILS 31R or 31L parallel operation departure rwy 31L attention runway 16 is wet braking action good low visi RVR For runway 31 first pos more than 1500 meters transition level 110 wind variable 6 knots visibility 1400 meters SN clouds FEW 300 Feet SCT 1400 Feet BKN 2500 Feet temperature minus 1 dewpoint minus 3 degrees C QNH 1007 TEMPO visibility 3000 light SN Firstcontact 4 ATIS airport Ihbp i Get METAR LHBP 1718202 YRBO6KT 1400 R31L P1500 SN FEWO03 SCTO14 BKNO25 M0O1 M03 Q1007 TEMP Current ATIS info a Start multiple record playback ATIS maker URL rrrwy atisairporbadep tdeprwy atisairportj amp app I
91. craft gt squawk The squawk of the selected aircraft gt temp The temporary altitude of the selected aircraft gt time The actual GMT time in seconds without the Z sign gt type callsign The type of the selected aircraft gt uc anything It simply makes the parameter to be uppercase gt wind The wind component of the METAR of the selected station For availability see metar 5 Built in simulator EuroScope has a never seen before special feature the built in ATC simulator for the purpose of practice and training Here you don t need any connection for the VATSIM nor other servers just sit down and take the control over the traffic Also for the ATC training from now it is much more easier to set up a traffic and see how the candidate can deal with it Prepare you EuroScope for a simulator session share your IP with the student to let him be connected and do the training So simple 95 You can use the built in simulator in two different ways gt Trainer candidate mode gt Self training mode Starting a simulation session It does not matter what kind of session you are going to have you have to start the simulation session in the same way First of all you have to set the connection mode as Start simulator server In this mode your computer going to simulate a VATSIM server for you candidate or for yourself and this server can be accessed by the method described below Important If you
92. creen In the Radar Screen section you can read about the main screen the upper an lower display and of course the menus TAGs To learn what you can do with the TAGs in the standard Matias format just check the TAGs section If you would like to move forward and create own TAG content then check the TAG editor Controller To Controller Communications A complete list including the new ongoing coordination feature of the different communication ways between controllers are described at the Controller To Controller Communication page Display settings The Display settings section describes how you can set up what to be displayed on the radar screen Also how to save and restore them with a single click Additional display features The way you can customize what colors line styles font sizes etc is attributed to items on the radar screen is decribed in the Symbology Settings section Sounds setup Sounds setup is about different warning messages from EuroScope Non Standard Extensions Used In EuroScope We use some tricks to publish the unpublishable data Read more about it at Non Standard Extensions page 3 1 Multiple Sectorfiles In the first public release v2 9a only one sectorfile was allowed to be loaded into one session The cause of this restriction was that the sectorfile itself and more the extension contains information that is global for a session Such information is the sector hierarchy and the automatic sector
93. cw vatsim net data satnet data txt gt http vatsim metacraft com satnet data txt 3 7 Display settings Display settings dialog This is where you can customize the display settings EuroScope takes a big step forward from previous radar clients by allowing users to switch on off individual items on the radar screen You may want to have a clear view and switch off most navaids but you need a given VOR or a FIX you want to see a certain Runway or a centerline without having to see others making the screen confusing this is the setup dialog for you Earlier witty sct file creators used the SID STAR settings to add adjustable little practical details to the screen now with EuroScope there s no need for that anymore Open the Display Settings Dialog by clicking on the upper toolbar on OTHER SETTINGS gt Display settings Or Directly by clicking on the ia Altitude filter Display settings icon Important All the changes you make in this dialog last only in the current session Leaving EuroScope your modifications are forgotten To save them call Sector file gt Save menu 7 gt Show squawk C aircrafts Display or hide targets with squawk mode Charlie gt Show squawk stand by aircrafts Display or hide targets with Squawk stand by gt Show history trail Display or hide history trail points Display settings dialog Show squawk C aircraft Show squawk STBY aircraft Show history trail Cancel
94. d TAG selected item background if selected the specific item within the detailed tags won t be highlighted 3 9 Sounds setup Sound type Conflict Alert rowse To define audio notifications to certain events go to Other settings gt Sounds in the menu In a simple configuration window you can assign any wav files to the following actions gt Handoff request sound is played upon receiving a handoff request gt Handoff accept sound is played when handoff is accepted by another controller gt Conflict alert if the minimum separation is not kept conflict alert notification will be played Separation minima can be configured in the Short term conflict alert settings dialog gt Radio message audio notification of incoming messages on your primary frequency gt Private message audio notification of incoming private messages gt ATC message audio notification of messages on the ATC board gt Broadcast message audio notification of broadcast messages gt Landline request audio notification for incoming landline calls e g intercom gt Supervisor call audio nogification of incoming supervisor messages gt Connected sound is played when connection is established gt Disconnected sound is played upon disconnection gt Ongoing coordination request audio notification of incoming ongoing coordination requests gt Ongoing coordination accepted audio notification of accepted ongoing coo
95. d to that position will be assigned to you and you can see the offline simulated traffic arrival estimates gt ATIS Same as primary frequency but it defines the primary frequency information of your secondary ATIS connection for more go to the Voice ATIS dialog It is required by VATSIM that the channel name on the ATIS primary voice server must be the same as the callsign of your ATIS connection Therefore you can not select it before connecting your ATIS user to the servers gt RCV TXT Receive text messages By checking it you will receive text messages from this frequency You can not switch it off at primary Important When you are connecting to VATSIM via a proxy in the secondary client you Should set up the text receive in each client as they are independent from each other gt XMT TXT Transmit text messages Your text messages will be sent to all frequencies that are checked You can not switch it off at primary gt RCV VOI Receive voice It enables voice data to receive from this room This check box also stands for the connect and disconnect When you press EuroScope will start to connect you to the server In case of primary frequency after a successful connect the send voice will be enabled automatically In the place of the check box you can see the status of the voice channel It changes the symbol from X to OK when the connection is established and also indicates when voice is coming or sending via this channel W
96. e ENTER it will move the focus to the editor allowing you to edit the message immediately You can copy as many items from the records as you wish To go back to the list just press the TAB key When you are back in the list you can start typing the record content and the item will be selected You can also enter free text to the edit box that will be compiled letter by letter When you press the Start multiple record playback EuroScope gets the content of the edit field First it extracts and replaces all function calls In this way you can enter free texts like Saltim LHBP and before playback it will be changed to the actual value Then EuroScope extracts the pieces from the string When a piece in squared brackets are found then the part will be searched in the record content fields of the record list If one matches then the recorded file will be concatenated to the ATIS message If there is a number between brackets then EuroScope will tell this number not by digits but a well formed number Eg 1500 will result like 1 thousand and 5 hundred To be able to add all possible numbers EuroScope requires the following prerecorded files gt Numbers from 0 to 19 0 1 10 11 18 19 gt The ten numbers 20 30 80 90 Hundred and thousand hundred thousand gt and and 27 If the next part is not between nor brackets then it will be compiled letter by letter Every letter
97. e chance to override the next controller calculated by EuroScope Click with the left button on the sector indicator It opens a popup menu with the reachable controllers Select one from the list It will be assumed as next controller independently what sectors are next The overridden controller is flagged by accepted ongoing coordination color Select reset to allow EuroScope to detect the next controller based on route and sectors You also have the possibility to delete next controller by selecting UNICOM Nerte Toler 9 1 EDMM_CTR la 23 9238 EDWW CTR 123 228 EDWW E CTR 16 488E505 CTR 35 458 EURM CTR 126 158 LFMM_ CTR 27 128LK44 CTR 3 778LYB4 CTR 19 788EDBR N APP reset UNTCOM 3 Aircraft type the type of the aircraft coming from the flight plan 52 By clicking on it with the right button you can toggle its display in the Tagged TAG The type is followed by the aircraft category sign by default H or M or L or J and the communication type r or t or is here also Note that from version 3 0 EuroScope never displays the v as voice is the default communication form on VATSIM and we would like to save Spaces Only the different or unidentified types are flagged To set the communication type just click on the sign there are to spaces in the detailed TAG for v types that allows the mouse clicks Then a popup menu appears to select the right type Comm Yoice Text Receive 4 Actual altitude
98. e flight strip is displayed here The flight strip display is very similar to ASRC In the first column you can see gt callsign gt aircraft information based on the flight plan data gt flight plan A350 and current ground speed G345 The second column gt flight plan type I stands for IFR while v for VFR plans gt departure and destination airport you can see extended information about the airports in the bottom line gt alternate airport The third column gt cleared altitude flight level The fourth column gt final cruising altitude level The fifth column gt route the first two lines contain the flight plan route section gt remark the flight plan remark section The flight strip annotations columns In these three columns you can see the flight strip annotations For the annotation EuroScope uses the same 3x3 block layout that was invented in VRC To edit any of the annotations simply click to the place and edit the sting in place When editing an annotation you can use the TAB key to move between the 9 fields The fight strip can be pushed to the next controller using the ss Fl u command or by RIGHT click on the strip itself When you initiate a handoff to the next controller EuroScope automatically pushes the flight strip The last column gt assigned squawk the top line contains the assigned squawk it may be empty if no squawk is assigned by any controller so far gt actual squawk
99. e line is empty then it selects the next displayed chat window If the line is not empty then it extracts the function names from the command line and selects next parameter See later in the Aliases section gt ESC The escape button has three different meanings If the command line is not empty then it simply clears it If empty but has an aircraft selected then it deselects all aircraft This way you can send messages on your primary frequency to anyone even if you are unable to select him her If empty and no aircraft is selected then it closes the chat window You can open it again by a doubleclick on any chat name or initiating a new chat See command line functions gt Ctri Up arrow The Up key with Ctrl pressed gets the previous line from the CHAT window and puts it into the command line There you can reedit copy part of it to the clipboard etc gt Ctri Down arrow Like the previous but it goes to the next line gt Shift Up arrow The Up key with Shift pressed gets the previously entered command to the command line gt Shift Down arrow The Sown key with Shift pressed gets the next entered command to the command line gt Up arrow It scrolls the chat content one line down to see one more line on top Down arrow It scrolls the chat content one line up to see one more line on bottom Page Up It scrolls the chat content three lines down to see more lines on top Down arrow It scrolls the chat co
100. e sector definition of the ESE file gt Inhibit auto flight strip push on handoff If this box is checked the aircraft flight plan is not automatically pushed to the next controller It s up to the controller to push the flight plan using the SS controller ID command or with the popup menu on the flight strip gt Automatically display METAR of active airports The metar of active airports is automatically added to the Metar List if there are runways activated for those airports gt Captalize FP fields and scratch pad With this option enabled text in the flightplan and the scratch pad is capitalized 76 gt Coordination options gt Do not use accepted coordination color Indicates that accepted coordinations are to be displayed with normal color and does not need a highlight gt Do not use refused coordination color Indicates that refused coordinations are to be displayed with normal color and does not need a highlight gt Put incoming coordinations to first place Aircrafts with incoming coordination requests are moved to the top of the Advanced Lists gt Allow direct beyond COPX point If set then no coordination is initiated if a point is selected beyound the actual COPX gt Who is online URL Here you can specify the URL from where EuroScope can download VATSIM s data for the Show simulated traffic function Here are some servers gt http vatsim info servinfo satnet data txt gt http europe
101. ection So the SECTORLINE will be displayed IF you are controlling parami AND IF param2 AND param3 are controlled by two different controllers And in our case the GMMO_GMMW SECTORLINE will be displayed if you are controlling GMMM_O SECT and GMMM_O SECT and GMMM_W_SECT are controlled by two different controllers 3 The third line is the other condition for this line to be displayed and follows the same logic And since this SECTORLINE is a straight line we only need two coordinate points to define it 4 The fourth line contains the geographical coordinates of the separation point between GCCC4 and GCCC3 SECTORLINEs This is the starting point of the SECTORLINE 5 The fifth line contains the geographical coordinates of the separation point between LPPC2 and LPPC3 SECTORLINEs This is the ending point of the SECTORLINE All SECTORLINEs follow the same rules and are more or less complex according to their shape so GMMO_GMMW is a simple one with only two coordinate points and we can also have a SECTORLINE like DAAA1 which is defined by 26 coordinate points Note All SECTORLINEs can be defined in any order 9 3 SECTOR Definition Now we are going to see how SECTORs are defined A sector definition is as following SECTOR lt sector name gt lt lower altitude limit gt lt upper altitude limit gt OWNER lt ID 1 gt lt ID2 gt lt IDn gt BORDER lt SECTORLINE 1 gt lt SECTORLINE 2 gt lt SECT
102. ection parameters how to use the main connect dialog go to the Connection settings section Voice communication setup Detailed about the voice setup is in the Voice communication setup section Voice ATIS The Voice ATIS section describes how to set up your own voice atis station How to record an play the atis message Connection features Much more detailed why and how the connection works can be found in the Connection features section What ports are to be opened how to forward ports when behind a router 2 1 Connection settings Connect dialog By clicking on CONNECT in the menu bar the Connect dialog appears Definitely it seems more complex than the ones we have been using so far but shortly you will understand its advantages Pay close attention because this is one of the most important chapters of this guide 16 Connect dialog Select connection mode Direct to VATSIM v VATSIM connection Callsign Facility Center x Real name Gergely Csemak Rating Controller3 Certificate ID 904331 Server JEUROPE CE Password e Status 4 ATIS line 2 Budapest Radar Load Servers ATIS line 3 Online until 232 Save Profile ATIS line 4 Delete Profile Range __ bo ATIS airport HEP ATIS Facility Tower z ATIS Status ny Proxy connection Server Start Proxy Server Status Simulator server Scenario Logging and playback Logfile c EuroScope20070405 t4 Browse Star logging sess En fe pafa p
103. ector and position files section of the users guide But before jumping there via the link let me share some good news with you Sami Ylismaki created a tool which helps you in changing these lines http fishu kapsi fi fixrunways_zjx php Just paste all the values below runway into it and it will reformat the runways Once completed you ll only have to copy amp paste it back into the sector file It s a very simple utility completed in couple of minutes and made just for this In fact writing this post will take longer Should anyone else need help with similar reformatting the utility can be easily changed to accept different input formats as long as the airport is mentioned somewhere in conjuction with the runway data This is how it works The accepted format EVB NEW SMYRNA BEACH MUNI AIRPORT 02 20 000 000 N029 02 56 281 W080 56 59 021 N029 03 34 229 WO80 56 46 140 06 24 000 000 NO029 03 17 561 W080 57 28 789 NO29 03 41 101 W080 56 39 232 11 29 000 000 NO029 03 21 262 W080 57 13 460 N029 03 09 029 W080 56 26 830 The output 02 20 000 000 NO29 02 56 281 W080 56 59 021 N029 03 34 229 W080 56 46 140 EVB NEW SMYRNA BEACH MUNI 06 24 000 000 NO29 03 17 561 W080 57 28 789 NO29 03 41 101 W080 56 39 232 EVB NEW SMYRNA BEACH MUNI 11 29 000 000 NO29 03 21 262 W080 57 13 460 N029 03 09 029 W080 56 26 830 EVB NEW SMYRNA BEACH MUNI What it does Each commented out line will trigger it to memorize the line and it will be copied to
104. ectorline coordinates on the google map It is possible to copy and paste a single block and multiple sectorline blocks as long as the pasted sectorline blocks are preceded by SECTORLINE and each coordinate by COORD Pretty much straight forward copy amp pasting from an ese file I made this for my own use but figured some others might like to see the sectorlines on a map An example of the proper format to be copy pasted into the utility SECTORLINE RWY1 2 DISPLAY TERM1 TERM1 RWY1 COORD N047 25 46 561 E019 15 2 971 COORD N047 25 49 211 E019 15 6 575 109 SECTORLINE RWY1_ 3 DISPLAY RWY1 RWY1 TERM2 DISPLAY TERM2 RWY1 TERM2 COORD N047 25 49 211 E019 15 6 575 COORD N047 26 58 111 E019 13 14 847 It s possible to paste any number of such blocks and each will be drawn on the map Beware that the coordinates are not located on the map exactly in the same location as in Euroscope Other Issues My menubar does not show completely Well there are more ways to cure this problem 1 Increase your screen resolution 2 Turn off some menu items you might not need using the first icon in the menuber on the left I cannot select active airports and runways There is nothing listed in the dialog You forgot to make some minor changes in your SCT file That is adding the airport codes and names to the runways A short description of what to with SCT file is available in the Quick Start How to use existing s
105. ed in the upper left corner of the screen in the following format The first item is the first clicked point followed by the second clicked point then the heading of the line joining both points the inverse heading and the distance in nautical miles between them When the user clicks on the icon the distance command ins entered to the command line The user have the option to go down and write parameters manually Two parameters can be entered that can be anything fix ndb vor or airport name aircraft callsign or a geographical point in the following format N046 39 34 935 E020 24 14 512 The user also have an option to change the distance command to distance2 This command will show direction values at both ends of the line The Separation Tool S It is located on the right side of the main menu bar Use it if you think that two aircrafts are on convergent tracks and need special attention to avoid a conflict This tool indicates the minimum distance between both aircrafts and the time from now when this situation will occur It displays also for each aircraft a bold white line from current position until minimum approach position Here below both aircrafts are heading to LGAV The tag in the upper left corner is updated as both aircrafts situations evolve Here below is the tag result few minutes after 19 04 64 server at www vatsim net docs html ALL logins are tracked and identification 9 04 04 server numbers are reco
106. ed position Position can be vor ndb fix or airport 94 gt freq controller id If no parameter is given then it returns the primary frequency of the logged in controller actually the same as com If parameter is specified then it returns the primary frequency of the specified controller gt ftime minutes The actual GMT time plus the specified minutes Formatted to seconds gt ilc anything It simply makes the parameter to be lowercase gt metar station The complete METAR string of the station When you first call this function it may return an empty string It is because when the METAR is needed EuroScope asks for it from the servers but the evaluation is not suspended to wait for the result Therefore and empty string will come but next time as the METAR arrives it will be displayed correctly gt myrealname The real name of the controller Actually the name you specified in the login dialog gt oclock position It returns the relative bearing of the selected aircraft to the specified position based on the current heading of the selected aircraft Position can be vor ndb fix or airport gt radioname controller ID If no parameter is specified then returns the radio name of the active controller Otherwise it looks for the controller based on the short ID The radio names are defined in the POSITIONS section of the ESE file gt route The route string from the flight plan of the selected air
107. edefined standard descend or climb rate If you need a higher than that then press the Exp button to expedite When expediting the button changes to Norm to restore the normal rate When descending in expedite mode then the IAS will not be reduced gt Simulated controllers EuroScope can simulate two neighbor controllers to the trainee There are two set of controls to manipulate them gt Controller name Simple type the controller login name here gt Controller frequency Type the controller main frequency to here gt Login check Check this box to start simulating the controller When the controller is on you can not change the name and the frequency gt Accept HO Use this button to start tracking an aircraft by the simulated controller You can track untracked aircraft or accept handoff from the trainee 99 gt Auto check box This check box adds some extra automatic function They are handy when you are making a self training mode The following actions are automatic when the box is checked e When an AC has been landed it turns the transponder to stand by and removes itself from the list e 3 minutes into the sector then a handoff is initiated automatically e When a departing aircraft shows itself for the simulation it is assigned to the second controller Starts the takeoff roll and initiates a handoff e When an arriving aircraft shows itself for the simulation it is assigned to the first controller gt Aircraft
108. en empty gt Scratch pad filled indicator If the aircraft scratch pad is not empty a static I string Otherwise empty Do not forget that if the content of the scratch pad is a name of a waypoint then the scratch pad itself is considered as empty gt Scratch pad The content of the scratch pad if not empty Once again if the content of the scratch pad is a name of a waypoint then the scratch pad itself is considered as empty gt Scratch pad always Same as above but item is always visible If empty then a static TXT is shown 61 gt Sector entry point name The point name along the flight plan route of an aircraft where it should enter the sector The definition of the sector entry points is once again an extension to the original sector file gt Sector entry exit altitude The altitude where the aircraft should be as described by the standard procedures when entering or exiting the sector of the controller who is currently tracking If no such point is defined in the sector extension file then the final cruising altitude is displayed gt Sector entry exit point name The point name along the flight plan route of an aircraft where it should enter or leave the sector The definition of the sector entry exit points is once again an extension to the original sector file gt Sector exit level The flightlevel altitude at which the aircraft is supposed to leave the sector gt Sector exit point name The point name along t
109. ength of the base leg line it always starts at the other end of the vectoring line 83 How to display them In this dialog you only can setup how the extended centerline pieces are built up To display them you should go to the Display settings dialog There you can switch on and off individual runway centerline pieces Setup dialog v Show squawk C aircraft Show squawk STBY aircraft Do not display aircraft below O tt Do not display aircraft above O ft Squawk interval 2600 2677 Leader line 5 v miles v OK Cancel Apply Tag family Matias built in E LHEP Ferihegy 13L 31R O centerline name O extended centerline 1 O extended centerline 1 left ticks O extended centerline 1 right ticks O extended centerline 1 left vectoring O extended centerline 1 right vectoring O extended centerline 1 left base O extended centerline 1 right base extended centerline 2 DJ extended centerline 2 left ticks extended centerline 2 right ticks O extended centerline 2 left vectoring extended centerline 2 right vectoring O extended centerline 2 left base extended centerline 2 right base J LHBP Ferihegy 13R 31L Ci centerline O name O extended centerline 1 O extended centerline 1 left ticks O extended centerline 1 right ticks O extended centerline 1 left vectoring O extended centerline 1 right vectoring O extended centerline 1 left base The centerline and the name are the main items t
110. er the Sector Inbound List flight strip bay otherwise you can put that list anywhere you want on your screen gt Connect DEP to SEL bottom If checked locks Departure List flight strip bay under the Sector Exit List flight strip bay otherwise you can put that list anywhere you want on your screen gt Show text messages As we prefer voice communication we might miss important text messages coming on our primary frequency With this option we can display the incoming messages with time stamp on top of the radar screen with double clicking we can hide them and go to answer them gt Show STBY aircraft This tool comes handy when you would like to turn on the radar tags for aircraft that are squawking STBY gt Show simulated traffic Traffic falling out of your range are also simulated This way you can have information on flights that are not in your range yet If this option is on when you are not connected to the network you can see all aircrafts and controllers online based on VATSIM statistics data gt Play sounds Play sound files for certain events like handoff etc Configuration is possible in Other Options gt Sounds gt Show magnetic north up If this option is checked then the magnetic north will be displayed to the UP side of the monitor If unchecked then the true north gt Enable advanced proxy communication EuroScope is designed to be easily used in systems with two or more monitors and displays In
111. et of conditions for a LOA point to be recognized The first section defines the time of the COP you are declaring a sector COP or a FIR COP Use either the FIR_COPX or the COPX prefix Next follows a previous point departure airport rule You can put in there any preceding point you want to use to filter out that COP line Next is a departure runway rule Next is the fix it applies on rule Next is the next point or arrival airport rule Then is the arrival runway rule For any rules you want to bypass replace it with the character After the routing rules comes a display rule the preceding sector and the succeeding sector If these two sectors are controlled by the same controller then the COP code line will be bypassed Next are the LOA instructions either descend to or climb to altitude in feet Lastly the name of the COP is declared as you want it to be shown usually the name of the COP The COP lines have a priority from top to bottom So the topmost line that verifies all rules will be chosen even if lower is a more suitable line which should be chosen Therefore place the lines with most rules at the top and the lines with least rules at the bottom 7 2 Scenario file The file The scenario file is a pure TEXT file You can edit it with any text editor The file is processed line by line There are no sections in this file you can mix all kind of definition lines with the others The only exception is that the aircraft position
112. ets or clears the scratch pad text of an aircraft If no text is specified then it clears the previously set value In EuroScope there is no limit for the length of the scratch pad message but probably your TAG will look like awful But only the first 5 characters of the text will be published to the servers and to the neighbor controllers There is also a trick in EuroScope that if the scratch pad text is a waypoint name along the route from 2 8h any named point not only from route then it will change the calculated track of the aircraft as the next point is the specified The display of such scratch pad message is in the heading AHDG indicator in the TAG Syntax qs lt free text or waypoint name gt lt click on a TAG or AC in the list gt qs lt free text or waypoint name gt lt ASEL to use selected aircraft gt gt qt available by pressing F3 It accepts handoff initiated to me or starts tracking an untracked aircraft Syntax qt lt click on a TAG or AC in the list gt qt lt ASEL to use selected aircraft gt This command can be executed by pressing the F3 key when the mouse is over an opened TAG and therefore the detailed TAG is visible In this case it is executed immediately no ENTER or click on TAG is required gt qu available by pressing Shift F6 It simply deletes all displayed route line It is an easy way to switch off all airplane route display if you have shown too many Syntax qu gt qq avail
113. eviously saved ones gt General settings Some general settings such as ASEL and FREQ key current squawk range further details under General settings gt Display settings select what to be displayed on your radar screen further details under Display settings gt Symbology settings set the colors font sizes and line types used on the radar screen further details under Symbology settings gt TAG editor create your own radar tags labels using this editor further details under TAG editor gt Sounds audio notifications can be configured here further details under Sounds setup gt Voice voice communication setup same as the one available through the icon further details under Voice communication setup gt Active airports runways select airports to be concerned in your traffic prediction lists select active runways for displaying default procedures SID STAR and accurate distance calculation further details under Active airports runways gt Message dialog check if all needed files have been loaded from the right source further details under Message dialog gt Extended centerline setup EuroScope is able to draw enhanced runway centerlines on your radar screen Easy configuration neat result further details under Extended centerline setup To turn on runway centerline items go to Display settings gt Short term conflict alert setup you can setup when an alert is to be displayed further details u
114. example only EDDF Frankfurt is selected both DEP and ARR gt To select the active departure and arrival runways click the DEP and ARR columns for the given runway In this example departure runways 25L 25R and 18 and arrival runways 25L and 25R are selected for EDDF Frankfurt In addition to that for EDDK Cologne Bonn runway 24 is selected to allow Euroscope the calculation of the correct COPX points gt You can reduce the list to show only the active airports 3 11 Flight plan setting dialog Fight plan setting dialog fe FR VFR AP data T B735 F Destination EPKK Alternate EPWA Altitude FL370 Squawk 2010 Z Actual 2010 Z Temp alt EEE ED Most part of the dialog is really straightforward and needs not too much explanation It contains the most important pieces not all of them of a flight plan and makes it possible to be modified Just edit DAVAR the values you would like to modify then press OK to save or Cancel to NOVLO ew forget it You can open the flight plan dialog even if you are an SOGMO a observer or someone else is tracking the aircraft but in this case you BALUX mu 2 will not be able to save your modifications Remarks 4 VFPS OPR Awww SIMNETAIR COM REG SPLKC Comment Waypoint ETA UNIPA S5 M BS BS E A A E G E E amp m E e a I e a o a a a a a Probably the route section is a little bit more interesting then the others It is a simple text
115. fo fatiscodeslvp 2 Extracted URL http vacchun hujtd esmetar php tlcond 100 1013 110 amp metar LHBP 201718202 20 Test URL Automatically generate new ATIS using the URL Close To be able to use this mode first you should record all the possible pieces You can do it in the same way as you record the single records You should however remember that concatenating records recorded here in this dialog is not smooth enough There will be too much silence between the pieces To avoid that EuroScope can handle WAVE files The best way is to record and trim your message parts in an external WAVE editor There you can make more precise trimmings Then save and register the files in the record list Do not forget to add the wav extension to avoid the automatic extension assignment When using wave files the concatenation is far smoother and the result is really close to a single record playback Important At this moment only 7350 Hz sample rate 16 bits signed mono PCM files are accepted by EuroScope do not ask why It is not a big thing to convert the records to this format using any wave editor Once you have all the recorded pieces you need you can start building up your complete message from these To copy a recorded item just select it and press the Insert Item button or press ENTER That will copy the record content string to the Text ATIS and multiple record ATIS edit box and places it between squared brackets If you press th
116. ft List This floating bar displays the aircrafts which are relevant for your position active position Both the in range and the simulated planes are here Each line is colored depending on the aircraft state according to the definition in the datablock settings in symbology dialog A left click on a line selects the aircraft it can be used as a click on the TAG itself right click opens the flightplan editor ADOT Planes alx MoH vb4 D LHEF M H111 A LHEF 13 M4H9111 A LHEF ls MAH751 A LHBP 16 TE LS pal LGAY Bg low A A2 La mI K The first item is the aircraft callsign With a handoff request in progress a left click opens the handoff popup menu The second item can either be an A D or gt gt gt A indicates the aircraft is an arrival for one of the users active airports gt D indicates the same for departures gt gt gt indicates the aircraft s destination is outside your sector and the aircraft is going to leave or enter your sector The third item is the aircraft departure or destination airport The fourth item depends on the aircraft state For departures it is the assigned squawk for arrivals it is the distance remaining to the destination airport When the user is working an active sector which the aircraft is going to enter it is changed to the time left until entering the sector The list can be filtered by the header left letters gt A is for arrival planes gt D is for depa
117. g a file that EuroScope would like to use And looks like it is something you did not have before This error message should pop up when you load a SCT which does not have an ESE pair ESE is a sector extension file that works together with your SCT file This file is very complex detailed description is available ESE Files Description but you can build a simple version which of course does not provide full access to EuroScope s advanced features but at least you will have one You can use your old POF file for building your ESE file For further details check the Quick Start How to use existing sector and position files section of the users guide I try to save my color and line style settings without success Isn t it stored in the ASR files Symbology settings and TAG layouts are saved in your settings txt its name can be different but it has to be a TXT file and not in your ASR files Make sure you save symbology changes in the OTHER SET gt Save all settings I would like to build an ESE file is there any tool for making it For the time being making an ESE file is a bit inconvenient You may find it hard at first sight but the structure of it is well described in the ESE Files Description section of the manual Hopefully there will be some tools to make life easier The first one is a http fishu kapsi fi draw_ ese php sector visualization tool made by Sami Ylismaki which does the following It will display all pasted s
118. hat can I do if I would like to use more than one SCT file We recommend using one complex SCT file but if you prefer you may load two instances of EuroScope connect them via proxy and load two different SCT files in the two instances that way you can switch between the two radars using ALT TAB How can I create ASR files It is very simple Go to OTHER SET gt Display settings and select unselect items you need do not need until you are satisfied with the layout of the radar Now you will have to save it Go to OPEN SCT gt Save as and give your ASR a file name Then finally call a Save all settings in the OTHER SET menu To open these saved layouts go to OPEN SCT gt Open and remember you can load more than just one of these ASR files To switch between them use F7 When I load a new SCT it shows a blank screen What s the problem with my SCT file There is nothing wrong with it What happened is the following the ASR file currently in use does not belong to your newly loaded SCT file Your ASR file would like to show data not included in this SCT so it does not show anything useful For proper use of your new SCT file go to OPEN SCT gt Close to close your current ASR This will open a new ASR for your which you can configure Or if you already have an ASR for this sector load it via OPEN SCT gt Load I get an error saying Failed to open sectorfile extension in the message dialog Why is that You are missin
119. he flight plan route of an aircraft where it should leave the sector The definition of the sector exit points is once again an extension to the original sector file gt Sector exit time The estimated time over the sector exit point Be careful if you coordinate a point that is far from the sector border this value might be different from the actual sector exit time gt Sector indicator It is a compound item and can show several things If the aircraft is not tracked by you then is simply shows the current owner ID stands for a non tracked aircraft If the aircraft is tracked by you then it calculates which sector is the next along the route and displays the ID of the next controller if he she is online There can be also if no next sector is defined or the next sector is not controlled no controller online When the aircraft within three minutes time to the sector border the next controller ID is changed to the primary frequency E g AP BU NED 133 20 gt Sector indicator unchangable Same as above but can t be changed by the controller gt Sector planned entry level The flightlevel altitude at which the aircraft is going to enter the sector based on the flightplan gt Sector planned entry time The time at which the aircraft is over the planned entry point Be careful if you coordinate a point that is far from the sector border this value might be different from the actual sector entry time gt Squawk The
120. he same callisgn When you have a proxy connection the two clients are sending special messages to each other e g when you type something in one client command editor it will appear in the second as well when you select an 18 aircraft it will be selected in the other as well etc To disable this feature uncheck the Enable advanced proxy communication menu item When you start the second instance of EuroScope on the same machine the voice subsystem will not be initialized In the toolbar you will see that the voice dialog icon is flagged by two red lines That is because only one program can listen the appropriate UDP port The second instance will not be able to produce any voice related functionality and it is blocked by the code Therefore always use the firstly started instance for voice setup In the new release you also have an option for Automatic proxy connection This is really a handy tool When your first EuroScope instance starts then it will start the proxy server immediately The furthermore instances will find that the proxy is running and connect to it immediately When you regularly use multiple instances e g in a munltimonitor environment then it is really easy to connect them with this option Simulator server To host a simulator session select connection mode Start simulator server Simulator server Scenario JAProgram Files ASRC Scenario_LHSM_16 tet Browse For more detailed information see the Built
121. hen voice is being received or sent on the primary voice channel all secondary voice connections are muted That works quite well but notice that there may be certain situations when the communication ends but the program doesn t receive an end message on the primary voice channel In that case your secondary connections are muted To avoid this just press the secondary PTT for a while that will clear this flag and enable secondary communications You can always check here if there is communication being sent received on the headphone icon gt XMT VOI Transmit voice It specifies if voice should be sent to this channel when pressing the PTT button or not When you press the primary PTT then the voice is sent to the primary channel only When you press the secondary PTT then your voice will be sent to all secondary channels simultaneously 2 2 1 Voice hardware test and setup The voice hardware setup and test dialog is rarely used At the very first time just select what voice hardwares you would like to use test them and only come back here if something is changed in your system EuroScope has two independent voice hardware connections and each can be set up individually It is possible to use the same device for both setup but there is the possibility to use different e g send the primary voice to headphone while the secondary to the desktop speakers As it comes from the names the primary connection has a some priority over the secondary
122. hole list from the screen and use the radar to select the aircraft There is a new feature from version 2 8m the pilot delay In this way the simulated pilots will not follow your instructions immediately as you hit any of the control buttons but will wait for a configurable random amount of time That makes the simulation much more real You can tune the individual pilots how quickly they respond to an order On the dialog the new requests are shown immediately but in the plane status you can check if the pilot is already following it or not Let us see all controls one by one without grouping just from top to the bottom and from left to the right gt CTR edit It is a simple information display It shows the trainee controller If an external trainee is connecting then here you can see if the connection is successful gt SQ edit it needs a selected AC The actual squawk of the aircraft Simple type another value here and it will be changed gt EMG RDO buttons they need a selected AC These buttons are for fast squawk change Press EMG to set the squawk to 7700 and RDO to have 7600 gt StBy C buttons they need a selected AC Press them to change squawk to stand by or to C mode 97 gt ILS buttons they need a selected AC These buttons are forcing the aircraft to approach to the selected runway The number of runways can be used is limited to four In this picture you can see the default LHBP configuration He
123. ication only That does not need additional settings But if you wold like to allow controller from an external machine to be connected open the port 6810 for incoming requests When you are behind a router you should forward this port to your workstation gt Proxy client Once again normally you use it internally and you do not need additional settings But if you would like to join to an external proxy server open the port 6810 for outgoing requests gt VATSIM statistics data The statistics data is downloaded by normal HTTP request Therefore it needs port 80 to be open for outgoing requests Normally it should work if you have a proxy server But if the proxy needs an authentication EuroScope will fail so far 3 Going into details Multiple Sectorfile Usage The first public release 2 9a was unable to load more than one sectorfile at a time An improvement is that in the new release any number of sectorfiles can be loaded But as several things in 29 EuroScope depends on the sectorfile it is extremely important to understand which file is used for what It is described in the Multiple Sectorfiles page Sectors and aircraft states Before learning about how the software functions work some basic principles must be understood One of EuroScope s main features is how it handles the sectors you are controlling and how the aircrafts are classified by your sectors All this is described in the Sectors And Aircraft States page Radar s
124. igned speed popup list This function pops up a list with the possible speed IAS values to be assigned It has no real meaning to add this function other than the assigned speed item This function is not available if someone else is tracking the aircraft gt Open communication type popup Assigned to the communication type item this function allows you to change the communication type of the aircraft as you would do it using F9 This function is not available if someone else is tracking the aircraft gt Open COPN altitude coordination list This function is part of the ongoing coordination feature and allows you to coordinate an altitude at which an aircraft shall enter your sector from the previous controller This function is not available if the plane is not coming to your sector or if it has no owner gt Open COPN point coordination list This function is part of the ongoing coordination feature and allows you to coordinate a different routing an aircraft shall enter your sector with the previous controller This works similar to giving a direct the only difference is that the direct is a recommendation to the other controller that he accept or refuse This function is not available if the plane is not coming to your sector or if it has no owner gt Open COPN COPxX altitude coordination list This function is part of the ongoing coordination feature and allows you to coordinate an altitude at which an aircraft shall enter or e
125. igure the display The extended centerline setup dialog Extended centerline setup dialog Start DME 0 Length 20 fo Range ticks TEN Start DME 5 Interval 1 0 Tick length 0 6 Marker length 1 Interval iS Vectoring Centerline distance 7 Vectoring distance 3 vectoring angle 30 Base leg distance 5 Main centerline gt Start DME The offset in NM the main line of the centerline will be started gt Length The length of the main line of the centerline Note that the endpoint will be Start DME Length distance from the runway threshold Range ticks gt Start DME The first tick mark to be displayed distance in NM from the threshold The tick marks will be displayed from here until the end of the main line gt Interval after Start DME How often in NM a tick mark should be displayed gt Tick length The length of the tick marks ortogonally to the main line gt Marker length The length of the marker tick marks ortogonally to the main line gt Interval after Marker length How often in NM a marker tick mark should be displayed Vectoring lines gt Centerline distance The distance from the threshold of the end of the vectoring line in the main line where vectoring line touches the main line gt Vectoring distance The length of the vectoring line gt Vectoring angle The angle between the main line and the vectoring line gt Base leg distance The l
126. ill not start the playback gt Automatically generate new ATIS using the URL check box If you check this box and a new METAR for the ATIS airport arrives to EuroScope then it automatically stops the current playback increases the ATIS letter by one sends the URL with the new METAR data to the external interpreter fills the result to the Text ATIS and multiple record 28 ATIS and immediately start the multiple playback If you still has all the necessary prerecorded pieces then all works automatically without any touch of a control By the time this documentation was created there are two external tool that can be used gt The VACCHUN interpreter It is built by Attila Abraham You can find a complete set of wave files and also a complete reference manual in the atis_demo folder of your EuroScope installation Of course the wave files are limited to LHBP only but you are free to rerecord them to your area gt UNIAtis by Sami Ylismaki This is a really configurable ATIS interpreter Currently it supports full METAR decoding with the exception of remarks and every field can be customized to support a wide variety of formats It includes support for semi freely customized fields in the ATIS If you would like to join him and make your own area specification contact him via the forum of UNIAtis at http www uniatis net forum 2 4 Connection features Connection features There are just a few things to be set up to assure a
127. ined symbols for different aircraft categories The user can modify them if he is willing to gt Display options gt Display airspace lines Highlight sector border where adjacent sector is online gt Display FIX name at route points If that option is checked every FIX name in the route appears near the displayed route Otherwise not gt Display ETA at route points If that option is checked the expected time of arrival at every FIX name in the route appears near the displayed route Otherwise not gt Show route when accepting If that option is checked the route is immediately displayed upon handoff approval gt Lock show route when accepting When accepting a handoff the routing of the aircraft is locked visible gt Rotate text along the route If the route is closer to east west than to south north the route annotations are rotated by 90 degrees gt Show CLAM warnings CLAM stands for Cleared Level Adherence Monitoring It indicates that the pilot does not follow the cleared level It is shown if the plane is outside the 200 ft range of his temporary or final altitude and his vertical speed does not indicate that he is trying to reach it There are some exceptions 1 CLAM is not displayed on the ground 2 CLAM is not displayed if the AC is cleared for approach 3 CLAM is not displayed if no temporary altitude set and the plane is not tracked 4 CLAM is not displayed if AC is flying at final altitude but
128. information scratchpad texts new ground status flags will be displayed to all relevant controllers New lists Plan ahead and keep overview of your flights with the advanced sector inbound exit and departure lists display multiple METARs Easier voice and text ATIS setup Easier sector file development new functions to draw and handle sector lines LS Visual Approach flags New built in tag families Eurocat 2000 SATCAM etc a number of new keyboard shortcuts and many more you will be thrilled to discover Have you ever imagined you could control virtual flights as real as it gets Download the latest version of EuroScope and see for yourself Credits For v3 0 Without the help of several supporters EuroScope would never become a public VATSIM radar client Therefore I would like to thank this help to gt Attila Abraham He inspired me to work on the new features and most importantly the ongoing Coordination He always supplied me all the information that was necessary to have it as close to the real life system as possible And I have to say that among others Attila has the most rigorous eye on the functionality He also created a full featured ATIS interpreter Todor Atanasov Bernard Candela and Stephan Boerner They helped me a lot to finalize the documentation you are reading just now gt Sami Ylism ki for creating UNIAtis the customizable ATIS interpreter http www uniatis net forum Juha
129. ingly That is quite straightforward On the other hand sometimes there is a need to change the settings on items grouped by their type E g it is quite common that you would like to see all VOR s symbol and name but not the frequency With this hierarchy you should click every frequency member one by one that is really boring To speed up settings like this EuroScope offers the doubleclick function First select the item you would like to change e g VOR s frequency then set the state to the desired at one item Then make a doubleclick on that item and at once all items with the same name and level will follow it It still can take time to create your finest working environment but as a help EuroScope can remember your settings in the asr files that can be saved and loaded gt VORs switch ON OFF each symbol name frequency gt NDBs switch ON OFF each symbol name frequency gt Airports switch ON OFF each symbol name gt Runways switch ON OFF the following items centerline the runway name extended centerline 1 1st direction extended centerline left or right clicks ticks every 1 nm on extended centerline between 5 20 nm vectoring draws a 30 degrees interception track for a 10 nm final base draws a base leg track line leading to the interception tracks gt Fixes switch ON OFF each symbol name gt STARs switch ON OFF individual Stars or elements of the STARs section gt SIDs switch ON OFF individ
130. ired gt qy available by pressing Shift F4 It is used to drop track of the aircraft Syntax qy lt click on a TAG or AC in the list gt qy lt ASEL to use selected aircraft gt gt qz available by pressing F5 This function changes the final altitude of an aircraft Important that it does not change the flight plan just assigns a final altitude Syntax qz lt altitude in 100 feets gt lt click on a TAG or AC in the list gt qz lt altitude in 100 feets gt lt ASEL to use selected aircraft gt gt rcenter Use this command to override the default range center position The range position is claculated in EuroScope as follows The default value is the one defined in the sectorfile But if the login name first four letters match any airport name from the sectorfile then the airport will be the center of the visible range this way TWR positions with small range values will surely see what they need By defining another point you can change the center of your visual range anytime EuroScope needs some 10 15 seconds to publish the position and to update the visible elements Syntax rcenter lt object gt Where object can be anything vor ndb fix or coordinate The coordinate can be defined by clicking in an empty place by mouse gt seeall A supervisor only command It opens up all TAGs Be careful It just changes the display of the TAGs to be the same as they were up But it is only a display setting and the TA
131. ith the currently online active controllers which you can use to override the automatically selected next controller indicated in the Sector indicator item This function is not available if someone else is tracking the aircraft gt Open next points popup list This function opens the same point as the Open COPX point coordination list gt Open RWY setup popup list When the plane is on the ground at the departure airport then this function opens a popup list that contains the list of the available runways of the airport Otherwise the list contains the arrival airport runway list When you select an item here the FP is amended to hold information about the departure or arrival RWY gt Open SID setup popup list It opens a popup menu with the available departure routes If there is an assigned departure runway then the list contains the SIDs connected to the runway only When you select an item here the FP is amended to hold information about the departure route gt Open SQUAWK setup popup list It opens a popup that holds two items One is for automatic SQ assignment and another for manual In that case you can manually enter the SQ value gt Open STAR setup popup list It opens a popup menu with the available arrival routes If there is an assigned arrival runway then the list contains the STARs connected to the runway only When you select an item here the FP is amended to hold information about the arrival route gt Open tem
132. ittle bit limited behavior As EuroScope does not have a resizing frame around there is no meaning to make smaller than the screen So the only difference between maximized and restored state of the screen is that in maximized state even the taskbar is covered by the radar In restored state the taskbar is visible My experience shows that when the screen is maximized MSN will show your state busy but not in restored state Clicking here with the right button a popup menu appears that allows you to select the position of the window from a short list You can split the screen vertically to two half and horizontally to two half or three third The selected position is used only if EuroScope is not maximized Finish working EuroScope Most of the menu items can be activated with left mouse button as usual though there are some buttons where right mouse button might be used too FO ATG SOU a X 43 This floating bar can be set on any position on screen at user discretion It displays some information about the controllers in the area of your center The top bar allows you to filter which controller positions are displayed on screen by clicking on the buttons located in left part of the floating bar Displays FSS stations on line Flight Service Stations Displays CTR stations on line Center positions Displays APP stations on line Approach positions Displays TWR stations on line Tower positions Displays GND stations
133. ke this NO44 34 6 524 E026 06 27 632 LROP texts TORA D 26L 2490m A finished freetext section may look like this FREETEXT N044 34 37 952 E026 05 53 935 LROP taxiways W N044 34 34 336 E026 05 28 289 LROP taxiways 0 N044 34 6 524 E026 06 27 632 LROP texts TORA D 26L 2490m Terminal routing section This section contains the routing for the standard terminal procedures such as SID and STAR It also contains the rules for assignment of those procedures by runways in use and the route end point route start point This section must start with the following line SIDSSTARS without quotes The format of a routing line is lt type of route SID STAR gt lt airport of destination departure condition gt lt runway related to that route gt lt routing name gt lt route points gt The lines priority is from top to bottom The topmost line has most priority The first line that completes all conditions will be chosen as the correct routing The type of route can be SID or STAR and declares whether the next condition airport should be the departure or the arrival airport for that aircraft The airport is declared as the full ICAO code for that airport The next condition is the runway in use Declare a new line for each runway that uses that respective routing The name will 102 be the name of the SID STAR with the discrete identifier The route will be declared by any FIX VOR or NDB that makes part of the routing with spaces be
134. ken in account you must be covering MGT sector NOTE this sector is not from the POSITIONS section but from the SECTOR section which will be described next Next are two conditions for which two sectors must be covered discretely for this line to be highlighted In this case the sectors MGT and BUD must be covered by a different controller and you must be controlling sector MGT It is recommended to create more lines one for each case that should verify Then the actual line must be declared using coordinates Each coordinate point must be declared with the COORD prefix then followed by the LATITUDE and then the LONGITUDE COORD N047 59 23 032 E023 30 49 151 A new COORD line will be made for each point making up the respective SECTORLINE Make sure the end point of the SECTORLINE is common with the start point of the next SECTORLINE There is an easy way to create circle sectors without defining so many coordates that form a circle on the screen Just use the CIRCLE _SECTORLINE definition Using that you can make a circular sector around any object FIX VOR airport or a coordinate defined in the line In the first version it needs three parameters sector line name center point name radius In the second version it needs four parameters sector line name latitude longitude radius CIRCLE SECTORLINE LHBP_ APP LHBP 30 CIRCLE SECTORLINE LHBP_ APP N047 25 2 968 E019 21 31 221 30 Tips A SECTORLINE is a border line which is comm
135. llers via scratch pad text in a form SXXX or MXXX If the other controller uses EuroScope too this type of scratch pad text will be recognized as assigned speed YAFS71 E270 At YAFS71 EMS 720M SAR ARSI Seg ie J00 ARSI MG 7LQBARSIN EDDM 200 300 2 og F 300 300 were AKSIN TH pag ARSIN TA mg 69 TRE M 67 MA 66 M E YAF371 EM B734 M YAF371 EM B734 M 300 ARSIN N457 ARSIN ECOM 300 ARSIN N457 ARSIN EDOM 300 300 5260 ARC 300 300 M 7A ARC ARSIN TXT ARSIN TXT Important When making a simulation session alone or for a candidate setting the assigned speed will drive the simulated aircraft to the specified speed 12 Assigned rate of climb descend the assigned rate of climb or descend to the aircraft If no rate is assigned then a static string ARC otherwise a letter R then the assigned rate Similarly to the assigned speed you can select the rate values from the popup list Assigned rate is propagated to other controllers via scratch pad text in a form RXXXxX If the other controller uses EuroScope too this type of scratch pad text will be recognized as assigned rate 13 Assigned heading the assigned heading to the aircraft If no heading is assigned then a static string AHDG otherwise a letter H then the assigned heading Similarly to the assigned speed you can select the rate values from the popup list Assigned heading is propagated to other controllers via scratch pad text in a form HXXX If the other controller uses
136. ment in the plane type a static w is displayed Otherwise it is empty gt Not cleared or not reached temporary altitude This is the sector exit or if not given the final altitude If different from sector exit altitude the displayed by three digits 150 or 050 If same as sector exit but the aircraft is not at this level then an extra space is added to the beginning Otherwise empty gt Not cleared sector entry exit altitude It is a combined tag item If the plane is coming into your sector then sector entry level altitude is displayed If inside your sector then the sector exit level altitude If the sector entry exit level is not defined then the requested level is displayed here This item is changing the color on coordinated values gt Not reached temporary altitude It is the temporary or if not set the final altitude It is displayed only if it is different from the actual level altitude If it is reached then empty gt Radio failure indicator If the aircraft is squawking 7600 then a static RDO string Otherwise empty gt RAM warning If the aircraft is more than 5nm away from its calculated route the RAM warning is shown RAM is not shown if the plane is on the ground or cleared for approach has a direct to point or assigned heading And not shown for VFR plans gt RVSM indicator It indicates that the plane is equipped to be able to fly in RVSM airspace The symbol is strikethrough w If the plane is non RVSM able th
137. munication where your secondary input and output hardwares are used for transmission use your secondary PTT gt Override for the caller it works exactly like an intercom call transmits on the secondary output device with the secondary PTT for the receiving unit voice comes on his secondary output to transmit there is no need to press the PTT secondary voice input and the communication on the primary frequency is trasmitted to the other party gt Monitor listen to the selected controller s frequency without having the opportunity to transmit on the frequency gt Accept to accept an external ground to ground communication call gt Refuse to refuse an external ground to ground communication call gt Disconnect to close the active landline connection Note At one time only one ground to ground communication can be opened to a specific controller EuroScope uses the following ground to ground communication status indicators outgoing INTERCOM not accepted yet M incoming INTERCOM not accepted yet m successfully established INTERCOM connection outgoing OVERRIDE not accepted yet 44 W incoming OVERRIDE not accepted yet H outgoing OVERRIDE successfully established incoming OVERRIDE successfully established outgoing MONITOR not accepted yet incoming MONITOR not accepted yet outgoing MONITOR successfully established E incoming MONITOR successfully established The Aircra
138. must be timed out In that way it takes about 1 2 minutes to stop receiving position updates from the cleared area gt point To pointout and aircraft to a controller When an aircraft is pointed to you it is displayed in the AC list with an arrow then the name of the controller who pointed out the aircraft Syntax point lt controller ID gt lt click on a TAG or AC in the list gt point lt controller ID gt lt ASEL to use selected aircraft gt gt qb available by pressing F9 It sets the squawk code manually or automatically or the communication type of an aircraft If no additional parameter then an automatic squawk value is assigned The available squawk range is coming from the POSITION definition part of the ESE file see ESE files description If a 4 letter valid squawk is specified than that value will be assigned If V R or T letter is defined that it sets the communication type to voice receive only or text respectively Syntax qb lt V or R or T gt lt click on a TAG or AC in the list gt qb lt V or R or T gt lt ASEL to use selected aircraft gt qb lt valid squawk gt lt click on a TAG or AC in the list gt qb lt valid squawk gt lt ASEL to use selected aircraft gt gt qd available by pressing F2 It toggles the display of the metar of the specified stations Syntax qd lt stationl gt lt station2 gt lt station3 gt gt qS available by pressing the INS key It s
139. must precede the flight plan and route description ILS runway definitions You can define four active runway for one session It can be defined as an ILS ILS lt runway name gt lt threshold latitude gt lt threshold longitude gt lt runway heading gt The name of the runway will be shown in the four buttons An example line ILS31R N047 25 24 615 E019 17 35 260 310 106 Holding definitions You can define as many number of holding patterns as you need The definition line is the following HOLDING lt 1x name gt lt inbound course gt lt direction gt Where fix name can be anything VOR NDB FIX from the sectorfile The direction can be 1 to indicate a right turn and 1 for a left turn Here are some examples HOLDING AGMAS 310 1 HOLDING MAMOS 130 1 HOLDING VEBOS 95 1 HOLDING TPS 160 1 Airport elevation It is a single line definition AIRPORT ALT lt altitude gt An example AIRPORT ALT 550 Controllers Definitions There can be two fake controllers in the simulation session They also can be configured in the scenario file CONTROLLER lt index gt lt callsign gt lt frequency gt An example CONTROLLER 1 LHCC CTR 133 2 CONTROLLER 2 LHBP TWR 118 1 Aircraft positions You can define as many number of aircraft as you need for the session Be care that simulating an aircraft needs probably more concentration than controlling them To define an aircraft you should define the starting posi
140. n is automatically activated If used on the primary instance the Proxy Server is activated any subsidiary instance is automatically connected to the primary instance on the same computer gt Keep scratch pad content after direct For VRC ans ASRC compatibility EuroScope deletes he scratch pad content after a direct is assigned and the point name is stored there With this option you can disable it and keep the original content This will cause that VRC and ASRC users will not see the assigned point gt Show A for altitudes Altitudes are preceded by A depending on the setting in The Menu Bar gt Show 500 ft items for non VFR If this option is set then in the altitude assignment popup lists below 1000 ft all 500 ft items are shown for all AC If disabled then for IFR planes only the 1000 ft items are displayed gt Use hovering TAG for key commands If that option is checked when the mouse is over a detailed TAG and the controller types any command that command is directly sent to the selected aircraft without any need to press the Enter key gt Auto messages for TEXT aircraft When this option is checked whenever something is set via the TAG menus then EuroScope generates a message to be sent via the frequency chat It is placed into the command editor but not sent automatically gt Set active APT by owned sectors This option automatically activates airports in the Active Airports Runways dialog if they are defined in th
141. n with another controller or not You see that until the VEBOS point I am free to give any direct as the plane will still go to VEBOS for the handoff But the points after VEBOS are marked with the ID of Budapest Approach AP These indicators mean that a direct needs a coordination with Approach he has to accept my offer BP 437 AP VEBOSSR BP e456 AP VEBOSSR BF430 AF VEBOS SE Cleardirect Enter name If I select th point BP437 a coordination request is sent to approach For me the new point name is displayed with different color And also the route plot is showing the desired new route ie a ea aaa Te G TTT Bes RUNWCSS ATYFWTC PSSR AFL CFL ADEF SID ADES ETA RFL FRWCOPX ETX XFL ASSR STAR SI s 4AF LHBP_APP 31h MAH563 E736 M 2642 258 258 LEMD LHBP 14 27 398 I WBP43714 28 178 2642 VEBOSSR A On the approach side the owner and the desired destination point is colored to indicate the incoming request There is also a configurable audio warning about it EFS gebr hend Let ak FOATG SOU x FRUNW C S PS5R ATYFWTCCOFN ETN PEL ETA ADEPWFRADES COPX ETX XFL STAR SI ASSR BUGuAGEPCTR 31 MAHS83 L208 E736 M EF437 28 88 176 LEHD 4 I LHEF COPX S60 VEBOSSR BU 12 Em T ou T ps F k10 F LJ SEF L13 MAHS amp 3 BU B736 M 250 BP437 N PA LHBP 380 179 70 If the plane itself is not inside the screen approach still can see the Serres colored values in the sector entry list This time the approach has 90 BA a 7 3G T
142. nal or cruise altitude gt FR Flight rule can be I V or S gt W RVSM indicator gt COPX Sector exit point name gt ETX Sector exit time gt XFL Sector exit level gt ASSR Assigned squawk number gt STAR Assigned STAR gt SI Sector indicator cant be modified The Departure List This strip displays all information about the aircrafts which are inside your sector and tracked by you You can modify some of these parameters by clicking on it In some cases a popup menu appears like in the detailed TAG and allows you to modify this parameter The default order of this list is by the estimated sector exit time LFS Depari e Let l mp DS0C7S ADEP ATYF WTC RUNW SID COPN CFL 485R ECOPX XFL ADES RFL FRW STS DLH2EN LHEF A320 M As default the following fields are available in that list gt DSQ Assigned departure order gt C S Aircraft callsign gt ADEP Departure airport gt ATYP Aircraft type gt WTC Aircraft category 47 gt RUNW Assigned runway gt SID Assigned SID gt COPN Sector entry point name gt CFL Aircraft temporary altitude gt ASSR Assigned squawk number gt E Clearance receive flag gt COPX Sector exit point name gt XFL Sector exit level gt ADES Destination airport gt RFL Final or cruise altitude gt FR Flight rule can be I V or S gt W RVSM indicator gt STS Ground status List Columns Setup Dialog This dialog allows to
143. name in the voice server Once again this field is scanned after a successful logon to set it as primary frequency if matching gt New button By pressing this button you can create a new entry to the ground to air communication list All the data will come from the edit controls therefore they must be filled in gt Modify button With this button you can change the description of one communication line This button is enabled only if no communication is selected at all You can not update a description if selected for anything gt Delete button It is used to delete one line from the descriptions It is enabled at the same time when Modify button is enabled gt Hardware setup button This button opens up the Voice hardware test and setup dialog box where you can setup the voice hardware configuration Before you try to do anything with voice be sure to go there to specify your hardware gt Voice ATIS setup As voice ATIS is closely related to this dialog it is available from here as well It will open the Voice ATIS dialog gt Connect mike to playback device check box It is a funny test tool It simply connects your primary and secondary mike input to the speakers When you press a PTT button and start talking your voice is extracted from the mike device and directed to the speaker immediately In this way you can listen back what you are talking And as it goes through all the encoding decoding phases you will listen back exactly
144. nder Short term conflict alert settings dialog gt Sector ownership setup jere you can set up how the sector assignment should work further details under Sector ownership setup gt Save chat to a file Save the content of your current chat into a text file gt Save chat to the clipboard Copy the entire text of your current chat to the clipboard 40 QUICK SETTINGS gt Show sector inbound list show flight strip with all aircrafts incoming to the sector gt Show sector exit list show flight strip with all aircrafts exiting from the sector gt Show departure list show flight strip with all aircrafts departing from this position gt Show controller list Show list of controllers also observers any connections with ATC clients gt Show aircraft list Show a list of predicted traffic that are to enter your airspace or have already entered it Show voice room list Indicate the names of those who are on your voice channel gt Show METAR list Display a floating bar showing all METAR requested if checked otherwise not gt Show ATIS letter in METAR list Display the ATIS letter in the METAR list if checked otherwise not gt Connect SIL to Top messages If checked locks Sector Inbound List flight strip bay under the incoming messages list otherwise you can put that list anywhere you want on your screen Connect SEL to SIL bottom If checked locks Sector Exit List flight strip bay und
145. nes which controller will control that individual sector In this way every logged in controller will be assigned by one or more sectors to be worked within These are completely dynamic in EuroScope When another controller logs in who has higher priority for a sector it will be reassigned immediately On the other way a leaving controller s sectors may be inherited by the online ones The hierarchy makes it possible to define the sector e g for a tower with the hierarchy list that assigns the sector first to the tower controller then to the appropriate approach and finally the control In this way if tower is online the sector belongs to him even if approach is online But if tower controller quits the sector will be assigned to the approach immediately The sectors owned by you and not owned by you are displayed with different background colors That way it is really easy to notice where you are controlling This feature probably helps best for the Euro Control position controllers who can see immediately when a FIR controller come online or leaves the system 32 Left picture In this picture I am controlling the Eurocontrol East sectors from Poland to Bulgaria No other controller is online and the whole area belongs to me Right picture Here you see that Praha came online Therefore his FIR no longer belongs to me Its color is changed And you also can notice the red line indicating an active handoff area where I should pass the aircraf
146. ntent three lines up to see more lines on bottom Note The primary and the secondary PTT buttons are disabled in the chat window If you select a key as PTT you will not be able to use it in the command line Aliases Alias files are the same that you used for ASRC You can load them as they are and if the functions are implemented in EuroScope as well then you can use them The general format of one alias line is lt alias name gt lt alias value gt Where alias name is the short name you would like to type and the value is what should be inserted into the command line as replacement The alias value string can contain several function calls see later parameters 1 2 9 and of course free text An alias value should not contain another alias name Well it can but it will not be extended The way you can use the aliases are completely different from ASRC It replaces the alias name to value as you type not only when you send it to somewhere Just type your message as you like Whenever a SPACE is pressed EuroScope tests the last word typed and if it starts with a DOT and matches any alias name it will replace the word immediately It is not necessary to start the alias at the beginning of the line it is not necessary to be at the end of the line Only to press a SPACE This idea makes it possible to see the extracted message before sending it 87 As the alias name is replaced immediately the parameter definition should work al
147. ntrollers on line to man the five positions and so Casablanca Control is controlling the five FIRs together In that case it is the first line with the 125 500 frequency which is used 9 1 POSITIONS Definition We are going to explain in details the different parameters of a POSITIONS line Example GMMM CTR CASABLANCA CONTROL OCEANIC 124 500 GMMMO C GMMO CTR 4201 4277 1 First parameter The first parameter is there only to remember you the usage of the line It can be anything and does not affect any function As you can see I used the same name for different lines 2 Second parameter The second parameter is the radio call sign generally the official radiotelephony call sign to be used with that station 3 Third parameter The primary frequency of the station 112 4 Fourth parameter The fourth parameter is the identifier It can be one character long or as long as you want We use a five characters length one to make reading easier 5 Fifth parameter This parameter is the character to be displayed in VRC or ASRC for identifying the controller EuroScope does not use it since the tracking controller is displayed in the detailed tag 6 Sixth parameter The first part of the call sign This parameter is used to identify the position 7 Seventh parameter The suffix of the call sign It is used in combination with the previous parameter So for the line of Casablanca Oceanic Control it will be GMMO_CTR That identifier is
148. o be displayed They are not related to the extended setup anyhow In the sectorfile there is only one definition of a runway even it can be used from both directions and therefore has two names In this picture you can see LHBP second runway 13L 13R To distinguish between the directions all extended centerline items are duplicated and named as extended centerline 1 or extended centerline 2 where 1 refers to the first end here 13L and 2 refers to the other end 31R of the runway As the picture on top of this page shows a 31 configuration only the 31R end of the runway extended lines are displayed It is also not necessary to display the ticks vectoring lines and base lines on both sides of the extended centerline That is quite useful when you display them in a parallel runway airport In the pictures you can see that in this case only the right side items are switched on for runway 31R while only the left side items for 31L If You are using the Show extended centerline for active arrival runways only option it is important to keep in mind that You need to setup all extended lines in the Display Settings regardless of which will be used in the specific situation When Euroscope automatically activates the centerlines for the arrival runways it uses the display settings On the other hand with this option activated ES will not show an extended centerline for an inactive runway even though it is setup here 3 15 Sector owne
149. o function in EuroScope that allows you to change the sectorfile reference of an ASR except the situation if the file does not exists If you need to modify it delete the reference using a notepad or rename the referenced sectorfile then you will be prompted 3 2 Sectors and aircraft states Sectors What is a sector A sector is a piece of airspace with a polygon boundary as lateral limits and with defined bottom and top altitudes levels as vertical limits The airspace controlled by the controller is his her sector e g LHBP_APP sector covers the Budapest TMA LHCC_CTR covers all Hungarian airspace or after a division LHCC_E_ CTR can cover the Eastern part of Hungary 31 NEW in Euroscope An important feature of Euroscope is that it can make the airspace you are controlling visually appear and on top of that since it Knows the vertical and horizontal limits of the airspace you own it can handle aircrafts differently Suppose you log in to control the Netherlands as EHAA_CTR the territory between the North Sea to the German and Belgian borders practically the FIR lights up Further suppose that heavy traffic makes it necessary to split up this sector and your colleague comes online as EHAA_W_CTR to deal with the London inbounds in the Western part that part of your earlier lit up will go blank since it is not owned by you anymore Another nice example is controlling multiple sector airspaces like the VATSIM Eurocontrol
150. o the selected location Location can be any object vor ndb fix airport controller callsign in that case the center of the visibility area is used or an aircraft callsign Sending the command without parameter will go back to the original center position the one before the previous center command Syntax center lt any object name gt center gt chat It opens a chat window to a specified controller or pilot Syntax chat lt controller or pilot callsign gt lt callsign2 gt lt callsign3 gt chat lt click on a TAG or AC in the list gt chat lt ASEL to use selected aircraft gt gt contactme available via the HOME button if command line is empty This command sends the Please contact me on XXX XXX private message to the selected aircraft Syntax contactme lt click on a TAG or AC in the list gt contactme lt ASEL to use selected aircraft gt This command can be executed by pressing the HOME key when the command line is empty and the mouse is over an opened TAG and therefore the detailed TAG is visible In this case it is executed immediately no ENTER or click on TAG is required gt dcenter Use this command to override the default latitude longitude aspect ratio center As default EuroScope calculates the length of one degree at the position defined in the sectorfile then uses it everywhere That could be quite incorrect if you are too far from the mercator By defining another point you can change
151. on with only two lateral sectors SECTORLINE BUDOP_LHCC DISPLAY BPT BPT BUD DISPLAY BPM BPM BUD COORD N046 37 12 101 E021 19 19 610 COORD N047 29 04 510 E022 00 35 050 COORD N047 57 13 950 E022 53 46 100 Translated this means the SECTORLINE has been assigned a name of BUDOP_LHCC It will be highlighted when condition you are controlling BPT AND BPT and BUD sectors are controlled by different controllers or you are controlling BPM AND BPM and BUD sectors are controlled by different controllers The sector line is created by two segments created by 3 coordinates points 104 You have the possibility to define the sectorline display away from the sectorline definition We found that sometimes it is far easier to define this when defining the sectors So whenever you need just add a DISPLAY _SECTORLINE entry after the sectorline definition Its syntax is the same as DISPLAY except that you have to define the sectorline name at the beginning DISPLAY SECTORLINE BUDOP_LHCC BPM BPM BUD The sector subsection This is the subsection where you define the limits of a sector and controller assignments priorities SECTOR MGT 34500 66000 OWNER MGT BPT NIT EUE ALTOWNER When no BPT MGT NIT EUE BORDER MOPUG LYBA LOMOS MOPUG MOPUG NERDI BUDOP_MOPUG MOPUG_ LHCC In the first line you declare the sector name and the vertical limits Prefixed by SECTOR followed by the separator then the assigned Sector Name MGT then
152. onse time The descend to waypoint and the descend to altitude parameters are used to setup an initial descent for the arrival planes That makes the trainer life easier as the initial values should not be set for every plane The planes with specified descend to values will reach the altitude at the given point Examples SROUTE MAH661 RUTOL BP523 MAMOS BP522 BP521 BP520 BP519 BP518 BP512 BP416 BP415 BP414 BP413 BP049 SROUTE MAH1501 VEBOS BP421 BP420 BP419 BP418 BP417 BP416 BP415 BP414 BP413 BP049 0 15 20 SROUTE AZA525 BP713 MNR BP612 BP610 BP614 BAKOT SIRDU SUNIS 10 5 10 SROUTE MAH663 RUTOL BP523 MAMOS BP522 BP521 BP520 BP519 BP518 BP512 BP416 BP415 BP414 BP413 BP049 10 5 10 RUTOL 19000 8 FA In section you will find the most frequently asked questions raised by users on our support forum We are planning to extend this list of questions from time to time Questions are grouped thematically ASR File ESE File SCT File POF File Can I use my old SCT and POF files in EuroScope Yes you can but you will need to make a few modifications to get them fully compatible with ES These changes are vital for the use of EuroScope s advanced features For further details check the Quick Start How to use existing sector and position files section of the users guide C Can I use more SCT files at a time 108 Yes since v3 0 EuroScope supports using more than one SCT file at a time For details check Multiple Sectorfiles W
153. ove but not shown if no heading is assigned 58 gt Assigned rate Assigned rate is an attribute of the aircraft It indicates the climb or descent rate give to it by the controller It can be set in EuroScope but not published via the network so far If no rate is assigned then a static string ARC is displayed If rate is assigned than an R followed by the signed rate value is visible e g R1500 gt Assigned rate if set The same as above but not shown if no rate is assigned gt Assigned runway The assigned departure or arrival runway The runway can be assigned by the controller but can be calculated by EuroScope from route SID STAR and active runways gt Assigned SID The assigned standard departure route The SID can be assigned by the controller but can be calculated by EuroScope from route and active runways gt Assigned speed Assigned speed is an attribute of the aircraft It indicates the speed give to it by the controller It can be set in EuroScope but not published via the network so far If no speed is assigned then a Static string ASP is displayed If rate is assigned than an S followed by the value is visible e g S160 gt Assigned speed if set The same as above but not shown if no speed is assigned gt Assigned squawk The squawk assigned by the controller gt Assigned STAR The assigned standard arrival route The STAR can be assigned by the controller but can be calculated by EuroScope from
154. p 370 168 F Liae As FL180 is below the top of approach sector the plane is not intend to leave the sector on the top to Budapest Radar but goes directly to Bratislava normally controlled by Praha But in case of RWY13 configuration it is quite probably that the plane climbs much faster then necessary and reaches FL180 well advance BADOV 73 a au When approach realizes it he start an altitude coordination 258 BU 248 BU 538 BU You can see in the popup list that up to FL190 Praha will be 228 BU contacted for coordination but at FL200 and above Budapest 418 BU Radar as in this case the plane will leave the sector on top Let ees us assume that approach stats an exit altitude coordination and 186 Budapest Radar accepts it TFACLEY 1 60 lky 1Sa Lk S Even Budapest accepted the coordination and allowed the plane to climb above FL180 up to FL250 the plane will just cross the section and will not spend there more than 1 or 2 minutes As F LISD there is not other traffic in the area and the plane does not need any command from Budapest Radar it is better to handoff to Praha from Approach skipping Budapest Therefore CTR opens a popup menu and sets Praha as next controller It start a coordination with APP NertcortoleT CTR starts the coordination 27 128LKa4 CTR 29 788 LHBP_app HN UNICOM area CTR point of view Ur mse fi Heee Bactoy ECHN Banw APP point of view F L1S0E APP can accept and refuse the
155. porary altitude popup list This function pops up a list with the possible temporary values to be assigned It has no real meaning to add this function other than the temporary altitude item This function is not available if someone else is tracking the aircraft gt Set clearance received flag This function sets or clears the clearance received flag It has no real meaning to add this function other than the clearance received item gt Toggle destination display This function switches on off the destination item display It has no real meaning to add this function other than the destination item 65 gt Toggle FIR exit point display This function switches on off the FIR exit point item display It has no real meaning to add this function other than the FIR exit point item gt Toggle ground speed display This function switches on off the ground speed item display It has no real meaning to add this function other than the ground speed item gt Toggle next sector ID freq display This function switches between the ID or the frequency of the next controller It has no real meaning to add this function other than the sector indicator item gt Toggle plane type display This function switches on off the plane type item display It has no real meaning to add this function other than the plane type item gt Toggle route draw This function switches on off the display of the calculated route track of the aircraft It also display
156. position can be anything used to help in identifying the line inside the ESE file Radio callsign shall be the official radiotelephony callsign that shall be used for that station Frequency shall be in full with as decimal separator The identifier is used in many places in the software and may be as short as one character and as long as required It is recommended to use a Standard length In ASRC VRC and FAA systems the length of that ID is 2 characters Prefix and suffix are the first and last parts of the callsign used to identify the position A code ranges are used to preset the assignment A code ranges from which the system will assign the codes for a specific position Optionally there can be some visibility centers defined for the position One center can be defined by two parameters latitude and longitude There can be maximum 4 visibility centers defined that is altogether 8 optional elements in the line Some examples of a finished Position section below POSITIONS ARGES TOP Bucharest Radar 121 170 AST A LRBB CTR 5401 5477 ARGES MID Bucharest Radar 124 250 ASM 1 LRBB CTR 5401 5477 NERDI TOP Bucharest Radar 122 020 NIT N LRBB CTR 5401 5477 NERDI _MID Bucharest Radar 125 150 NIM 4 LRBB CTR 5401 5477 BUCHAREST TMA Bucharest Approach 118 250 TMA LROP APP 5401 5477 OTOPENI S CTR Otopeni Tower 120 900 TOI S LROP TWR 5401 5477 LHCC Budapest Radar 133 200 BUD LHCC CTR LYBA Beograd Radar
157. r gt Stop ATIS playback It stops the current ATIS playback gt Listen playback check box If you check this box the the actual playback is sent to the secondary output In this way you can check what is sent to the voice server 25 Voice ATIS playback modes Before you start providing the voice ATIS you should decide which of the two methods you would like to use single or multiple record playback modes That makes completely different how you can should use the dialog Therefore there will be two descriptions even some buttons can be used for the same purpose Single record playback mode This mode is the easier more simple way to provide the voice atis In this mode you simply record your atis message into a file and EuroScope plays it back in a n endless loop A typical content of a single record playback mode looks like this Voice ATIS Setup Dialog ATIS files descriptor C Program Files EuroScope atis AtisFiles2 txt Browse Record content File name MyAtis MyAtis Record content MyAtis New File name MyAtis Delete Start recording Start single record playback Modify Text ATIS and multiple record ATIS Insert item Listen playback Ferihegy information 4 Departure RWY 31L and 31R arrival RWY 31R Wind 320 at 5 KT QNH altim LHBP ATIS airport hbp i Get METAR LHBP 1718202 YRBO6KT 1400 R31L P1500 SN FEWO03 SCTO14 BKNO25 MO1 MO03 Q1007 TEMP Current ATIS info A S
158. raft callsign gt PSSR Current squawk number gt ATYP Aircraft type gt WTC Aircraft category gt COPN Sector entry point name gt ETN Sector planned entry time gt PEL Sector planned entry level gt ETA Expected time of arrival gt ADEP Departure aerodrome 46 gt W RVSM indicator gt FR Flight rule can be I V or S gt ADES Destination airport gt COPX Sector exit point name gt ETX Sector exit time gt XFL Sector exit level gt STAR Assigned STAR gt SI Sector indicator cant be modified gt ASSR Assigned squawk number The Sector Exit List This list displays all information about the aircrafts which are inside your sector and tracked by you You can modify some of these parameters by clicking on it In some cases a popup menu appears like in the detailed TAG and allows you to modify this parameter The default order of this list is by the estimated sector exit time OFS Sector Extt Let RUNW CS ATYP WTC PSSR AFL CFL ADEF SID ADES ETA RFL FRYCOPS As default the following fields are available in that list gt RUNW Assigned runway gt C S Aircraft callsign gt ATYP Aircraft type gt WTC Aircraft category gt PSSR Current squawk number gt AFL Aircraft current altitude gt CFL Aircraft temporary altitude gt ADEP Departure airport gt SID Assigned SID gt ADES Destination airport gt ETA Expected time of arrival gt RFL Fi
159. rded 19 94 04 server Users must enter their real full first names and surnames when Logging 9 04 04 server onto any of the VATSIM net servers Rev 1 10 2 2342 On this picture you can see the message received from the server You will have the list of names above the box with whom you are in conversation with These names can be one of the followings gt callsigns pilot or controller to indicate private chats gt frequencies to see text messages come and sent gt server to see server messages welcome and other notifications gt ATC for ATC broadcast messages not that you can not write here directly just with the command gt Broadcast to see supervisor broadcast messages 49 gt SUP for supervisory request messages To change between them simply click on the name To collapse the chat bar press ESC and to close it double click the name whose chat you wish to close To jump to your primary frequency press PRIM FREQ button If you receive a new private message from a user then its callsign will turn blue in the list 3 3 6 Flight Strip An aircraft is shown on the screen as a radar target and an associated TAG that shows the 308 TISAK UL618 SUBES UL851 LNZ T161 DEGIN 308 v OPR SERBIAN AIR FORCE DF B734 BOEING 737 4098 medium landplane 2xjet simple RNAY Transponder with mode C LYBE Belgrade Surcin Yugoslavia EDDM M nchen Germany When you press the F6 button th
160. rdination requests gt Ongoing coordination refused audio notification of refused ongoing coordination requests gt Manual ongoing coordination audio notification of manual ongoing coordination gt New ATIS message sound is played whenever a new automated ATIS notification is received 3 10 Active airports runways Here you may select which airports are under your control thus what flights should be listed in the aircraft and departure list You can activate arrival and departure funcionality for each airport separately In the aircraft list every arrival or departing flights will be displayed in addition to aircrafts concerned by your sector If defined in the ESE file s sector definitions active airports will be set automatically dependent on the sectors under your control You can also set the runways in use regardless of the active airports The active runways are relevant for the SID and STAR prediction and optional also for the display of extended centerlines and the calculation of COPX points Optional the active airports with runways assigned can be automatically added to the metar list 80 Active airport runway selector dialog x DEP ARR RWY DEP ARR Airport 25L A Y 07RA 5R A F OFL E 36 18 A Hamburg 05 Hamburg 23 Hamburg 15 Hamburg zi Show active airports only Cancel gt To make an airport active click on the first two boxed columns next to the airport name In this
161. re are two parallel runways and both directions can be used in one session But if you have more runways to be simulated or more airports then you are limited to four runways in one session For the simulation only ILS approach is implemented but of course you can communicate with the trainee any kind of approach It drives the airplane only Yo can press the button anytime but if the aircraft is not in the right position it will not be accepted Right position means distance is between 3 and 30 NM heading in 30 degrees to the runway heading and must be below a 3 degree glide slope gt Resume Pause button It is a general button to stop and continue the simulation When you press the Resume button it starts simulating and changes the button title to Pause When you press the Pause button the simulation stops and the button changes to Resume gt Direct edit it needs a selected AC This edit box contains the name of the fix the aircraft if proceeding to You can simply edit and write any point name from the sectorfile to drive the plane toward that point gt Holding button it needs a selected AC Pressing this button the you can drive the aircraft following the holding pattern or leaving it The available holding patterns can be defined in the Scenario file page To enter an aircraft to a holding pattern it should proceed to the main point of the pattern Actually the point name should be in the Direct edit box When the aircraft is in
162. rmal that you notice no change in the display at all ASR Files Are Connected To Sectorfiles One change from 2 9a is that the ASR file itself holds a reference to the sectorfile see the Where My Settings Are Saved page for more about it When you first time load an ASR file that was created by 2 9a and therefore does not have the sectorfile reference will be connected to the active sectorfile automatically When you close the ASR you will be prompted to save this reference When you load an ASR file it looks for the referenced sectorfile If the sectorfile is loaded then nothing will happen it will use the already loaded information If the sectorfile is not loaded then EuroScope will load it automatically After the successful load you will be prompted if you wish to use the newly loaded sectorfile as active alx E 4 New sectorfile E EuroScopeFiles eureuir sct is loaded Do you J want to make it the active sectorfile When you load an ASR that references to a sectorfile that does not exist EuroScope will prompt you if you would like to use the active sectorfile or if you would like to browse for the file manually 5 x Eh E EuroScopeFiles Hungary _2007_05_10 v66 sct sectorfile not found Do you want to use the active sectorfile instead If you accept then the active sectorfile will be associated with the ASR If you refuse you have to browse and locate the sectorfile to be used with the ASR Actually there is n
163. rom fixes and airway names the whole flight plan will be extracted point by point ARAK 20 38 AUAGS4 B738 A91 PARAK N253 PARAK LOWW AUA9B4 I 336 LYBE SID TISAK UM173 PARAK UY56 GIGOR STAR LOWW B738 LYBE LOWW A456 6253 LOWW 336 Y7 LYBE Belgrade Surcin Yugoslavia LOWW Vienna Schwechat Austria It could happen that you or another controller gives a shortcut to a pilot It can be very easily set through the TAG Once the waypoint is defined the extracted route is also changed so does the distance to go calculation SIGOR 21799 AUAIS4 B7382W AS PARAK N253 PARAK LOWW 330 246 I 339 LYBE SID TISAK UM173 PARAK UY56 GIGOR STAR LOWW LYBE LOWW LOWW 336 V7 LYBE Belgrade Surcin Yugoslavia LOWW Vienna Schwechat Austria Aircraft states Now as we have this complete three dimensional flight route estimations EuroScope can compare them with the sector definitions The result of this comparison is that EuroScope is able to classify the aircrafts to the following categories Non concerned an aircraft that is not inside any of your sectors and based on the flight plan will never ever enter there Basically you will never control that aircraft This picture is really interesting I am controlling Budapest Radar Budapest approach is also online and DLH3446 is coming to LHBP But as the coordinated flight level at Budapest TMA entry point RUTOL is FL190 and approach is controlling up to FL
164. rrivals from Austria is passed to Budapest Radar even the route crosses this sector for a while and never enters to the sector of Budapest Radar but goes directly to the Approach So the Bratislava sector has a guest controller 105 Budapest Radar And all arrival traffic to LHBP will accept it and EuroScope will not show the frequency of Prague indicating a necessary handoff DEPAPT LHBP LHDC LHNY ARRAPT LHBP LHDC LHNY The DEPAPT and the ARRAPT can be used to activate airports for departure and for arrival depending on what sectors belong to you If there are airports defined for the sectors whenever you controlling sectors are changed the active airports data is updated And as a side effect the your METAR list might be changed also as they depend on the active airports The coordination point subsection This section defines the COP COordination Points used for coordination with adjacent sectors and ACCs Here you can also add LOA Letter of Agreement details and EuroScope will show you re the appropriate action based on the LOA for each radar track COPX DEP APT or FIX BEFORE DEP RWY FIX ARR APT or FIX AFTER ARR RWY FROM SECTOR TO SECTOR2 CLIMB TO XFL DESCEND TO XFL XNAME FIR COPX BUDOP LHBP BPM BUD 28000 BUDOP FIR COPX NARKA BPT BUD NARKA FIR COPX NARKA BUD BPT NARKA COPX NEPOT BPT NIT NEPOT COPX NEPOT NIT BPT NEPOT Each line defines a different s
165. rship setup Sector ownership setup dialog UKBY LUKK UKOV UKFY LRBB LTBB LBWR LBSR LGGG LWSS LAA LYBA LIBB LIMM LQSB LDZO LILA LHCC Lovy Sector name Ownership name Current owner Default Default EURE_FSS Default Default Default EURE_FSS Default Default EURE_FSS Default EURE_FSS EE EURE_F55 135 300 Default EURE_FSS Default EURE_FSS Default EURE_FSS Default Default Default EURE_FSS Default EURE_FSS Default EURE_FS5S Default LHCC_CTR Default LOVY CTR Select All Select None Save Load v Change ownership EE EURE_FS5 135 300 X Using this dialog one can change how the sector allocation works In the main list there are the sectors defined in the ESE file The first column is the sector name the second is the ownership rule name while the last is the callsign of the actual owner this is the situation of the dialog open moment and is not updated while the dialog is opened The most important idea one can change here is the ownership rule That drives EuroScope how it allocates the sectors to the controllers Each sector can have one of the following three roles for allocation Default The default role In this case the OWNER line of the sector definition defines the hierarchy of the controllers The first controller in the list will own the sector 84 gt An alternate ownership name If there are alternate ownership rules in the ESE file then it can be defined for
166. rtures gt O is for overflights gt T is for tracked planes The Metar List This floating bar displays the METAR stations requested by the controller The user requests a METAR by typing the F2 function key or by typing QD then the ICAO code of the requested station It appears in orange color in the menu bar and in the METAR floating bar in short METAR format Short format line DAAG vrbO03kt Q1029 Long format line DAAG 101030Z vrbO3kt 9999 FEWO20 14 04 Q1029 G Metars a 4 LHSM 14885ET 01029 If the user clicks on an orange METAR the change of the METAR is acknowledged the color changes from orange to blue and it is displayed in long METAR format in the right side of the command line 45 Using the C button on top left of the floating bar the user can acknowledge all METAR changes with one click Via Quick Settings You can add the current ATIS designator to the METAR lines The Voice List This floating bar displays information about pilots connected on the controller primary frequency Two buttons allows filtering of frequencies gt F Displays pilots connected on PRIM frequency gt A Displays pilots connected on ATIS frequency 3 3 3 Advanced Lists Summary Of This Page There are 3 different lists available in EuroScope All those lists have three small buttons located on the upper left corner of the list window The first left button defines the size of the list window The following options
167. rways High airways Fixes inl The settings are quite straight forward colors can be chosen from a a n T palette font size can be adjusted as required 5 values are also La accepted set line weight to a value of 0 10 and select line style i Noe from values of solid dash dot dash dot dash dot dot Datablock Me Fill VOR NDB FIX AIRPORT PLANE filling the symbols for the Chat VOR NDB Fix Airport and Plane M Transparent AC list background MV Transparent AC list selected item background MV Transparent detailed TAG background MV Transparent detailed TAG seleted item background gt Airports set attributes for symbol name gt Low airways set attributes for line name gt High airways set attributes for line name gt Fixes set attributes for symbol name gt Sids set line attributes for each Sid or elements of the SIDs section gt Stars set line attributes for each Star or elements of the STARs section gt ARTCC high boundary set line attributes for each high sector boundary gt ARTCC boundary set line attributes for each sector boundary gt ARTCC low boundary set line attributes for each low sector boundary gt Geo set line attributes for Geo data coastlines rivers lakes other lines of under the Geo section NOTE colors are defined in the sct file gt VORs set attributes for each symbol name frequency gt NDBs set attributes for each symbol name frequenc
168. s Still if you want to simulate a different system you are free to do so In EuroScope you always have the possibility to customize the outlook and or the behavior of TAG items See the TAG editor page Every TAG family have four different outlook types gt Detailed gt Tagged gt Untagged gt Unidentified Detailed The Detailed TAG comes visible when you move the mouse over a Tagged TAG At one time only one TAG can be detailed And this type has many functions connected to special parts of it 1 Callsign 2 SL Sector Indicator anor SWERE WEUBES M 8 ABP ga Ap ease 5 cathe l WGL We g i 6 Ground Speed my T FIR Exit Point COT 4_ Actual altitide FL MAH58 LOVV B73 gem AFL E COPX N367 FIR COPX LEND TE 8 ADES Destination 5 Sector Exit Point es ie TE RE k 9 Cleared altitude FL a a F ae 15 Blank area on the extended label 1d Assigned heading 12 Assigned rata of climb 10 Exit altitude FL from the sector 41 Assigned speed 1 Callsign It displays the callsign of the aircraft When you are tracking the aircraft there is a popup menu available with left button that allows you to transfer it Haden transfer Haide manual transfer manual transfer release release The first list comes up if there is a controller who is controlling the sector just after yours The second list is missing the transfer command when no next controller is detected The functions
169. s the estimated time of arrival to each point gt Track an aircraft This is a quick start tracking of untracked aircraft Editing the TAGs q J Eee i eae This dialog box helps you creating new or modifying existing TAGs Sn eee ER TAG families The built in Matias family can not be modified It is hard coded into EuroScope and will be rebuilt at every startup In reality when the system is up it works the very same way as a user defined family To create your own TAGs you always have to build a complete family When ready and saved you can select your family in the Display settings dialog and save it to the ASR file In this way the system will remember what TAGS to be used for what display layout The elements and functions of the editor dialog box gt TAG family combo In this combo you can switch between your TAG families It is also used to rename the current family You can also edit the name of the built in TAG but it will be ignored gt TAG type combo This combo is used to switch between the four types of the TAGS in the family You should define all types to be able to save the family gt The item list Major part of the dialog box is the item list defined for the specified family ans type If yo select an item here then its data is copied to the controls below and you can change the data there The order of the items is extremely important as EuroScope will display them in
170. s a handoff to the next controller if available instead of dropping target gt Shift F4 key It places the QY command to the command line to drop an aircraft Like contacme it also works on the aircraft that is under the cursor gt F5 key It simply places the QZ command to the command line to change the final altitude gt F6 key Without SHIFT it changes to the read only flight plan window that is displayed as a standard CHAT window By pressing SHIFT it places the QU command to the command line to draw the route of an aircraft It is very rarely used as this function works far better from the TAG gt Shift F6 key It places the QU command to the command line to draw the route of an aircraft It is very rarely used as this function works far better from the TAG gt F7 key If you are using more than one radar layouts at a time press this key to switch between them gt F8 key It simply places the QQ command to the command line to set or clear temporary altitude gt F9 key It places the QB command to the command line to set squawk code or communication type t v r For aircraft that is under the mouse it assigns the next available squawk automatically gt F11 key This key zooms in the radar screen This is a replacement of the mouse wheel zoom gt F12 key This key zooms out the radar screen This is a replacement of the mouse wheel zoom gt FREQ key as default the numeric STAR key First of all i
171. s the flightplan amendment dialog of an aircraft Syntax am lt click on a TAG or AC in the list gt am lt ASEL to use selected aircraft gt am lt aircraft callsign gt gt atis This function asks the ATIS information of a specified controller The answer will come as private chat message If no controller is specified then it wall send the query to the controller who s chat window is active Syntax atis lt conroller callsign gt gt break Request for relief It changes the status of the controller to leaving soon Syntax break gt busy Signal that you are really to busy for private chats In EuroScope there is only a one level simple busy status When set the followings are changed No sounds for ATC messages No sounds for Broadcast messages An automatic Sorry but I am busy I may not read your message answer for all incoming private messages And no sounds for them gt callsign This function allows you to change the ICAO_Airlines txt file from EuroScope Enter the name of the airliner then click on the TAG EuroScope will replace the original entry in the file Note that when you download a newer version of the ICAO_ Airlines txt your changes will be lost Syntax callsign lt airline name gt lt click on a TAG or AC in the list gt 88 callsign lt airline name gt lt ASEL to use selected aircraft gt gt center A supervisor only command It moves the center of the view t
172. sentation was invented where the atis message is built up from 26 prerecorded pieces It might sound a little bit more complicated at the beginning but when it becomes a routine it requires less time and more importantly less silence in the surrounding to setup your atis Voice ATIS Setup Dialog ATIS files descriptor C Program Files EuroScope atis_demo ExampleatisFiles txt Browse Record content File name A 0 O wav 1 l way 10 10 way 13L 13L way 13R way 2 Wwav 3 wav 3iL way 31R way 4 way NG Record content touchdown T File name touchdown waw Delete Start recording Start single record playback Modify Text ATIS and multiple record ATIS Insert item Listen playback LHBPinfo observation at 1820 IL5 31R or 31L parallel operation departure rwy 31L attention runway 16 is wet braking action good low visi RVR For runway 31 first pos more than 1500 meters transition level 110 wind variable 6 knots visibility 1400 meters SN clouds FEW 300 Feet SCT 1400 Feet BKN 2500 feet temperature minus 1 dewpoint minus 3 degrees C QNH 1007 TEMPO visibility 3000 light SN Firstcontact 4 ATIS airport Ihbp Get METAR LHBP 1716202 VRBO6KT 1400 R31L P1500 SN FEWOO3 SCTO14 BKNO25 MO1 MO3 Q1007 TEMP Current ATIS info a Start multiple record playback ATIS maker URL rrrwy Gatisairport amp dep deprivy atisaiport Bapp IL S8par 1 Bin
173. serts a completely empty family to the system You can use it if you want to start from a clean paper gt Copy family button It copies the content of the selected TAG family into a new name You can use it if you just want a family that is a little bit different from another gt Delete family button Stands for its name It deletes a family Of course the built in family can not be deleted gt Add item button It inserts a new item to the list If no selected item then it is placed as last If there is a selected then it will be placed just before the selected You can immediately start editing it by the bottom controls gt Delete item button It simply deletes the selected item from the list gt Item up button With it you can move your item one up in the list Sorry I was lazy to write the real drag and drop gt Item down button With it you can move your item one down in the list Sorry again I was lazy to write the real drag and drop 3 5 Controller To Controller Communication Basic Communication In this section you can find just a brief list of the communication types between controllers with a reference inside the documentation The basic communication is when you provide information that is available to all neighbor controllers In this cases you just spread out the data you have and you do not request any answer to them gt Temporary altitude assignment The cleared climb or descend flight level or altitude You c
174. signed speed Assigned speed is an attribute of the aircraft It indicates the speed that were given to it by the controller It is published by a special scratch pad string that can be interpreted by other EuroScope clients If no speed is assigned then a static string ASP is displayed If speed is assigned than an s followed by the first to digits of the value is visible e g 16 gt Two letter assigned speed if set Same as above but only visible if a speed is assigned gt Two letter ground speed The ground speed of the aircraft with only the first two digits indicated gt Two letter ground speed switchable Same as above but can be switched on off in tagged up TAG gt Vertical speed This is the actual vertical speed value It is displayed only if climb rate or descending rate is bigger than 100 f m It displays the absolute value without direction sign The value is the 100th of the actual rate displayed to zero decimal digit e g 1 100 f m 25 2500 f m Its value is really far from exact due to the random position updates coming from the planes gt Vertical speed indicator It is a small arrow to the UP or DOWN depending on the vertical speed It is displayed only if the climb rate or descending rate is bigger than 100 f m If you do not have the right EuroScope font installed you will see and in place of the arrow Functions on the TAG You are able to change not only the outlook of the TAG but also the beh
175. signment Similarly the runway assignment amends the route section like the one above And once again EuroScope clients can interpret the modified route automatically Look at the Non Standard Extensions page to see how EuroScope will change the route section of the flight plan when a runway or a SID STAR is assigned via the popup menus Advanced Communication We can say advanced communication when the two controllers are sending information to each other and in many cases they need an answer for their messages The following communications are here gt Handoff When you initiate handoff to the next controller he receives a message about it Then he has the possibility to accept or refuse it There are also two not really formalized communication form gt Chat area You can chat with all controllers Even with the ones that are out of your area gt Ground to ground voice Using the G2G voice communication you can talk to each other without disturbing the others Actually this form of communication is sometimes not really easy to set up The Ongoing Coordination The ongoing coordination is a new advanced feature in EuroScope It allows neighbor controller to offer accept refuse points and altitudes the plane is expected The coordination point may be just in the border of the sectors of the controllers but it is also possible to coordinate a point well ahead in the next sector The ongoing coordination is a brand new innovation
176. so differently As the name replaced EuroScope searches for the parameters When it founds the first one it become selected in the command line In this way you just simply type the parameter and the selected portion of the text will be replaced as it works in a normal edit box When you finish with the parameter just press the TAB key to search for the next parameter place to be selected When the TAB is pressed EuroScope first test if the same parameter is used in the alias again or not If used then it will replace that occurrence with the newly typed value too After that it tries to evaluate all the functions in the line once again In this way an alias parameter can be parameter of a function too See the next example The original alias is cont Contact radioname 1 on frequency freq 1 After typing cont and a space the command line will be extended to Contact radioname 1 on frequency freq 1 and the first 1 will be selected As you overwrite it with e g AP and press TAB key the line will be changed to Contact Budapest Approach on frequency 129 700 Using this method you should not memorize what parameters comes each after as you see the context before specifying the value One backward of the method is that it could not recognize if the Same parameter is in the line more than once So in that case one should specify the same value several times Command line functions In alphabetical order gt am This command open
177. ss Download the MSI installer When ready simply start it After some preparation seconds the installer Welcome screen appears ie EuroScope Welcome to the EuroScope Setup Wizard The installer will guide you through the steps required to install EuroScope on your computer WARNING This computer program is protected by copyright law and international treaties Unauthorized duplication or distribution of this program or any portion of it may result in severe civil or criminal penalties and will be prosecuted to the maximum extent possible under the law if EuroScope Select Installation Folder The installer will install EuroScope to the following folder To install in this folder click Next To install to a different folder enter it below or click Browse Folder D Program Files EuroScope Browse Disk Cost Install EuroScope for yourself or for anyone who uses this computer Everyone Justme Cancel lt Back Select the appropriate folder where you would like to place EuroScope and decide if the installation is for you or for every user of the computer Then press Next again to see the final confirmation screen ie EuroScope Confirm Installation The installer is ready to install EuroScope on your computer Click Next to start the installation Cancel lt Back 10 Simply press Next if you are sure to install EuroScope The rest is automatic The progress bar will
178. ssion is over Simulator training dialog CTR LHBP_APP SQ 2645 EMG RDO StBy ILS 31R 3L 13R 13L Resume Direct VEBOS Holding SWR2254 is following route Restart ote BP440 BP439 BP438 BP437 BP436 BP430 BP534 BP533 BP532 BP531 BP007 Next Skip Acstatus Pause Go Hendott Taxi Fasttaxi Takeoff 31R a 13R 1al Remove AC Heading 64 IAS free 270 Altitude Exp _ 14000 LHCC_CTR 133 2 LHBP_TWR 11811 E Callsign St Alt IAS GS Head WP Route MAH543 S 19000 315 400 134 RUTOL ERGOM BP540 TPS BP538 BP537 E MAH523 S 19000 306 389 103 ANEXA MOKSA BP440 BP439 BP438 BP437 SWR2254 S 14000 270 324 64 VEBOS BP440 BP439 BP438 BP437 BP436 MAH201 15000 298 361 309 ABONY AGMAS BP539 TPS BP538 BP537 E KAW 4283 5 18000 313 393 230 JBR AGMAS BP539 TPS BP538 BP537 E In the bottom area you can see the list of the aircraft currently simulating Most of the controls but Surely not all displays or acts on the currently selected aircraft They all become disabled if no aircraft is selected in the list below When you select a TAG in the radar screen it is also selected in the simulator dialog In this way you can follow the actions on the radar screen and just click sometimes in the controls This feature makes the self training mode possible In case you do not have a secondary monitor for the traffic control panel you can move out the w
179. t naz liemate nat Channel eure_fss lhbp_app lhbp_atis lhbp_d_app lhbp_d_qnd lhbp_del lhbp_gnd lhbp_twr lhbp_w_app lhec_ctr lhcc_e_ctr lhec_i_ctr thal hae Prim Atis RCY TXT XMT TXT RCV YOI XMT YOI Connected users Name LHBP_TWR ACCHUD2 904331 CEF 72E 954707 Frequency 199 998 KK_OBS 980871 Server w bostonartcc net Hardware setup SP RDE 930742 Channel LHBP_TWR Voice ATIS setup Close Connect mike to playback device The main part of the dialog is the list on top Every line here describes one ground to air voice connection and also its status The left four columns Name Frequency Voice server and Channel are the description part while there are six check box like items on the right Prim Atis RCV TXT XMT TXT RCV VOI and XMT VOI that can be used to indicate and to modify the actual status of the voice connection When you select an item from the list its detailed information will be displayed in the controls below where you can modify them By clicking on the check boxes you can change the actual status Important This dialog box never saves its modifications You must call an explicit Save all settings to save voice setup between sessions Also important If you run EuroScope for the first time then before using this dialog to setup your voice communication be sure to visit the Voice hardware test and setup dialog to define your mike speaker and push to talk buttons Note Here
180. t Item type the user can choose in the Tag item type popup menu which characteristic applies to the selected item gt Header name choosen abbreviation for the selected item gt Width the width of the column in characters gt Align to center this parameter can be set with the Align to center checkbox to align to center text in the column for the selected item gt Left button function this popup menu allows the user to choose in a list of preset actions to apply when the user left clicks on an item in the strip gt Right button function this popup menu allows the user to choose in a list of preset actions to apply when the user right clicks on an item in the strip The different buttons add item item up Item down and Delete item allows the user to add move up or down or delete an item in the dialog 3 3 4 Distance Separation Tools The Distance Tool al It is located on the right side of the main menu bar It allows to display the distance between two points These points can be an aircraft a VOR a NDB or even a single geographic point After clicking on the distance separation tool icon the user selects an aircraft by clicking on its TAG After clicking has been done a white line is following the mouse and displays a tag above it showing distance and heading from the first clicked point 48 If the user clicks on a second point the line remains displayed on screen and the resulting information is display
181. t can be switched to be displayed or to be hidden You can switch the following items by a right click gt aircraft type gt ground speed gt FIR exit point gt destination airport The altitude display is also different The logic behind is to display only the values that are different from the other ones In this way when all three eae values actual cleared temporary and coordinated final are the same then et er only the actual altitude is displayed 11 COPX NSE LTBS When the cleared temporary is not defined or equals to coordinated final then only the coordinated final is displayed And to be easily visible the ey See coordinated final altitude is not displayed at the beginning of the line but MAL 22 ECERS one letter to the right 11 COPK N317 13H ae And finally of course if all three are different or even if temporary and AHLIGA EE actual are the same then all three values are displayed 118 COPX 150 258 56 MAHI2 2 BPERiy Le CORN N317 LTES 11g 256 Untagged The untagged TAG is a really compressed with limited data available Only the squawk code and the altitude is visible And also the color of the TAG can be different Here the order is non concerned notified and redundant Unidentified The unidentified TAG is used when the aircraft is assumed to be flying at least it is supposed from the GS but not squawking C In this case you can see a static message TSSR and the ground speed
182. t http www vacc morocco org Tutorial_ GMMM ese if you want to try it with EuroScope The Moroccan Fir The Moroccan FIR is composed of five FIRs here described below with their respective frequencies I have chosen this FIR not only because I know it very well but mainly because of its composition which makes it a good example for a tutorial nLEMG nLXGB a a a o al nG TN a i i Casa Hord EE E 1 35 45 l o MTA PEHEN E IFA obMMW oian pGMFO Casa_Ouest ie 128 8 GMM gra aE e tei nGMF BHEE oO Try a Ae T ohiri H Fi oohMFI oGMFZ Casa_Est 125 1 oGhhs ae GPR e n GMMI jji a oD OF nGMMz oi Gtfehd P GAMO Casa Sud 126 7 GMM i G i r ol RF l l Oo GMa ooCFY oia ao f nGMAT DAOF no DAOG So we will define the controller positions as following gt GMMM CTR CASABLANCA CONTROL 125 500 GMC C GMMM CTR 4201 4277 gt GMMN CTR CASABLANCA CONTROL NORTH 125 600 GMMMN C GMMN CTR 4201 4277 gt GMMM CTR CASABLANCA CONTROL EAST 125 100 GMMME C GMME CTR 4201 4277 GMMM CTR CASASABLANCA CONTROL WEST 128 800 GMMMW C GMMW CTR 4201 4277 gt GMMM CTR CASASABLANCA CONTROL SOUTH 126 700 GMMMS C GMMS CTR 4201 4277 gt GMMM CTR CASABLANCA CONTROL OCEANIC 124 500 GMMMO C GMMO CTR 4201 4277 As you can see we have five FIRs and six lines in the POSITIONS for Casablanca This is because on VATSIM there are generally not enough co
183. t opens your primary frequency chat window If the command line is not empty e g a message to a pilot is written in there then it sends the command line content to the primary frequency addressing the message to the selected aircraft gt ASEL key as default the numeric PLUS key This is the aircraft selector key To use there should be some letters typed from the callsign Pressing this button the first callsign that matches the letters typed before will be selected You can press the key again to select the next match You can do it in a loop to see all callsigns matching gt HOME If the command line is not empty then it is the good old HOME key that moves the cursor to the beginning of the line But if the command line is empty then it places the contactme command to the editor Important if there is an aircraft which TAG is in detailed mode the mouse is over it then the command is executed immediately gt INS The insert button places the QS command to the command line to set or clear the scratch pad of an aircraft Like the HOME key it is executed immediately on the aircraft which has the mouse over its detailed TAG In this way you can clear the scratch pad fast Editing in the command line Some buttons do not have a real function connected to but simple changes the content of the command line in some way 86 gt TAB The TAB key has two different meanings depending on the content of the command line If th
184. t to be included in your definition When you have finished collecting points just RIGHT click to end the command You can now paste your resulting data everywhere you need to The data are formatted in a correct manner for direct insertion as COORD points gt showvis It displays the current visibility centers and radiuses Using it you can visualize the are of you range gt ss Push flight strip annotation It sends the flight strip annotation to another controller When you initiate a handoff it will be done automatically you do not need to use this command ss lt controller ID gt lt click on a TAG or AC in the list gt SS lt controller ID gt lt ASEL to use selected aircraft gt gt VIS vis1 vis2 viS3 vis4 These commands set the multiple visibility centers of the current session The vis command may have 1 4 parameters to set all visibility centers in one command The others may have only one Syntax vis lt center definition gt lt center definition gt lt center definition gt lt center definition gt visl lt center definition gt vis2 lt center definition gt vis3 lt center definition gt vis4 lt center definition gt The center definition can be one of the followings A comma separated latitude longitude pair The easiest way is to start the vis command then click on the screen The coorinate will be copied to the command line Angle distance pair An aircraft callsign
185. t tracking by me to the next controller We have now one more controller Wien Radar is online It does not change my sectors as Austria does not belong to Eurocontrol East But the red line indicating the active handoff area is visible Flight plan extraction We can say that EuroScope puts flight plan analysis into a new level It incorporates the FSNavigator database and uses all point and airway definition information to decide the exact route an aircraft will follow This requires pilots to file valid flight plans WAYPOINT AIRWAY WAYPOINT e g TORNO Y56 GIGOR for a LHBP LOWW flight EuroScope still can handles slightly invalid routings but on the other hand we must see that since the route section of the flight plan is a free text data it is simply impossible for a software to understand all that a pilot have filed if it is not a validated flightplan That way the extraction of the route data works is good for 90 of the flight plans but there are still ones that are completely misunderstood In these cases the controller can easily edit the routings 33 On top of the horizontal route data EuroScope extends it with a vertical profile For that all the coordination point see again in the ESE files description page descriptions are used and also a rough climb and descend rate calculator is implemented In this way a complete 3 dimensional flight route is calculated for each known aircraft In this picture you can see that just f
186. tart multiple record playback ATIS maker URL Extracted URL Test URL f Automatically generate new ATIS using the URL Close In the top side list box you may have several records but in this case only one atis record is necessary Just define a record by providing the description and the filename Press the New button if the list is empty to register a new record Then press the Start recording button tell your atis message When ready press the Stop recording and press Start single record playback to play your message in an endless loop That is all If you would like to change the message just press again the Start recording and tell your new message It is not necessary to stop the playback before you record your new message It can be done parallel When you have the new message stop the playback by pressing the Stop ATIS playback and start your new message play Special controls gt Start single record playback button It starts playing back the selected record in an endless loop gt Text ATIS and multiple record ATIS edit In this mode this edit box is just for a Text ATIS Simply type your ATIS message and it will be sent to the pilot who asks for it Multiple record playback mode I found that recording a complete atis message may take 20 30 seconds if you can do it at once without any error At peak times when you are alone in your sector you do not have so much time at all Therefore a new way of atis pre
187. te an entry point altitude coordination for you is az exit point altitude coordination for the current owner of the AC The last one is different not symmetrical at all Exit Point Altitude Coordination Probably the easiest way to describe the feature is to start with an example Sacer Eaitlet a ax FCOATGSOU ale ATF WTC PSSR AFL CFL ADEFSID ADES ETA RFL FRWCOPX ETX X S Doo CE In this first example you see that I am controlling the Hungarian FIR as LHCC_CTR and approach for LHBP is online too See the gt gt indicating that he is able to do the coordination I have a plane that is coming from the southwest and destination is LHBP In the TAG is is already indicating that the next controller will be Budapest Approach The route is plotted in the picture and it is visible that a real big turnaround is ahead the plane if he follows the route to VEBOS point that is the normal handoff point between CTR and APP and then follows the VEBOS3R transition to RWY 31R If the traffic allows it why not to give him a shortcut to a point that leads him to the base immediately 69 To start a coordination request with APP I popup the next points list from the TAG pn GOTAR C eire a e e OLATI yea l l l EROS UYS5S Here in the list you can now see the points along T BP 44g AP BP 439 f iP VEBOSSR VWEBOSSF BP4s8 i AP VEBOSSE the route and also a flag that indicates if a point is required a coordinatio
188. the holding pattern you can press the Holding button again to leave it In this case it gets back the next point from the route section and starts a direct to that point The holding pattern simulation is not the best at all You can expect some non standard movement When entering to the holding pattern the aircraft always proceeds direct to the main point When the aircraft passes the point start turning to the direction defined for the pattern does not matter which direction the aircraft came It turns until reaches 60 degrees angle to outbound leg of the pattern Then smoothly joins to the outbound leg When it reaches the end of the outbound leg it repeats the same for the main point To be honest the first turn can be very strange after that the pattern is followed not too badly gt Status string it needs a selected AC It contains a readable description how the aircraft movement is simulating It is really self explanatory gt Restart button Just press it to restart the whole scenario gt Route edit it needs a selected AC This editor contains the waypoints the aircraft will follow You can edit it manually if the trainee orders a shortcut or defines a whole new route When the aircraft reaches the next waypoint it selects the next from the route and the point is removed from the route gt Next button it needs a selected AC Press this button if you would like to move the aircraft to the waypoint next to the actual Surel
189. the user to customize the way strips are reacting when the user clicks on an item Sector Inbound List columns setup dialog ltem type Width Center Left button function Right button function Assigned runway 3 Open R Y setup popup list Open R Y setup popup list Callsign Open handoff popup menu Squawk Aircraft type Aircraft category Sector entry point name Open COPN point coordination list Open COPN point coordination list Sector planned entry time Sector planned entry level Altitude 7 5 4 3 5 5 4 Open COPN altitude coordination list Open COPN altitude coordination list 3 Destination ETA 5 4 1 2 4 5 5 4 7 2 Toggle route prediction points draw Toggle route draw Departure aerodrome RYSM indicator Flight rule 1 5 Destination airport Sector exit point name Sector exit time Open flight plan dialog box Open COPX point coordination list Sector exit level Assigned STAR Sector Indicator unchangable Assigned squawk Open COP altitude coordination list Open COP altitude coordination list Open STAR setup popup list Open STAR setup popup list Open next controller popup list NON NOOR ITANNAAAAAAs ANN Tag ltem type Sector exit point name v Header name COPX Width 5 M Align to center Left button Open COFX point coordination list Add Iter Item Up Right button Open COP point coordination list Delete ltem Item Down Cancel There are four colums in this dialog g
190. this case you should start two instances of ES and connect the second to the main program via proxy connection In this case both clients will be a full station using only a single VATSIM connection If advanced communication is enabled then several messages are sent between the clients e g the selected screen item the opened chat windows the entered message to the command line etc With the help of it you are able to write the command in one instance and click the aircraft in the second one and it will still work On the other hand when someone is connected to your proxy externally then it is not a good idea to see what he she is typing This flag is set automatically If a proxy connection is made to the localhost client then it is enabled otherwise disabled as default 41 ACTIVE AIRPORTS RUNWAYS LEADER LINE ON OFF LEADER LINE TYPE LENGTH HISTORY TRAILS 08 40 SHOW STBY AIRCRAFT TRANSITION ALTITUDE GND UNL ALTITUDE FILTER DISTANCE TOOL o5 uF SEPARATION TOOL Here you may select the airports to be concerned in your traffic prediction lists select active runways for displaying default procedures SID STAR and accurate distance calculation Clicking on the left side of the runway designator will select the airport in the right hand columns the departure and arrival runways can be ticked further details under Active airports runways Toggle the time distance vector for all displayed aircraft Mind
191. tic map elements such as FREETEXT and AIRSPACE section with the sector definition and auxiliary boundary information This file is in addition to other resource configuration files This file may be edited and created with any text editor and saved as a standard text file It must then be renamed to the file name of the sector file plus the ese extension And it also must be placed in the same folder where your sct file is as in EuroScope you can load the sct file only and the ese will be loaded automatically Freetext section This section provides additional map drawing elements It provides the ability to display any ASCII character on the radar video map The freetext section must be prefixed by this line FREETEXT without the quote marks Freetext definition lines have the following format lt latitude gt lt Longitude gt lt group name gt lt characters gt The separator between each element is the character The coordinates of latitude and longitude are prefixed by the letter of the hemisphere and then the geographical coordinate The format for the coordinate may be either the decimal format eg N013 32861 or in the degrees minutes seconds decimals format eg N013 19 43 327 You can group the free texts using the group name If you omit the group name then a Default group will be used The character section may use any number of ASCII characters except carriage return A finished line may look li
192. tion and altitude lt transponder flag gt lt callsign gt lt squawk code gt 1 lt latitude gt lt longitude gt amp ltaltitude gt 0 0 0 Where gt transponder flag can be N for normal or S for stand by transponder mode gt latitude and longitude can be the format found in the sectorfile or simple double values gt do not forget the static 1 at the 4th position and the three static 0 values at the end they are there for some technical reasons only Examples N MAH661 2622 1 N048 10 38 498 E018 10 36 537 15000 0 0 0 N MAH1501 2632 1 46 793880004674 17 795807317989 17000 312 4192376 450 N AZA525 2606 1 N047 26 41 961 E019 15 29 777 550 0 0 0 Flight plans Every aircraft position line should follow a flight plan line Do not change the order as EuroScope can save the flight plan only for aircraft with position The flight plan line looks like this 107 SFP lt callsign gt A lt flight plan type gt lt aircraft type gt lt true air speed gt lt origin airport gt lt departure time EST gt lt departure time ACT gt lt final cruising altitude gt lt destination air port gt lt HRS en route gt lt MINS en route gt lt HRS fuel gt lt MINS fuel gt lt alternate airport gt lt rema rks gt lt route gt Where flight plan type can be I or V Do not forget the static A from the second place I think that the rest stands for the content Examples SFPMAH661 A 1 B736 370 EHAM 1720 1720 390 LHBP 1 40 2
193. ts The lists similar to those already known from VRC gt The Advanced Lists More advanced lists containing all important information for the different states of flight gt The Distance Separation Tools gt The Chat Box gt The traditional Flight Strip as it is known from ASRC and VRC Command Line Prompt aD Ihbp LHBP_APP STU fon 129 700 Miklos Monoki Hungray_ 2006 08 06 v5 The bottom bar is called The Command Line 3 3 1 The Menu Bar Most of the menu items can be activated with left mouse button as usual though there are some buttons where right mouse button might be used too Turn on off some blocks of menu items like gt Show controller login name gt Show file name gt Show primary frequency gt Show ATIS frequency MENU ITEMS gt Show selected aircraft HE HU Show clock Show leader data Show transition altitude gt Show altitude filters Clicking here will take you to Connection Settings dialog The icons with orange border will show you the actual connection mode These 38 CONNECT DIALOG LHBP_APP SUP CONTROLLER LOGIN NAME a Bon ao E i VOICE COMMUNICATION SETUP PRIMARY FREQUENCY VOICE ATIS SETUP OFEN SCT SECTOR FILES LHBP_APP 31 ACTUAL SECTOR LAYOUT MAHE20 SELECTED AIRCRAFT 14 33 29 are VATSIM connection gt Playback logfile Simulator session During active connection the callsign and the your actual rating in br
194. ts of it will be missed The buttons are really self explanatory gt Play It starts playing a paused or stopped playback and also returns to a normal 1x playback after fast forward gt 2x 32x It increases the playback speed gt Pause It suspends the playback During the suspended playback the timeout checking is disabled even no position update is coming from the planes gt Stop It stops the playback and reverses the file pointer back to the beginning of the logfile gt 1 120 This is another fast forward tool Using it you can easily jump some minutes forward Be patient when jumping longer times EuroScope still executes all lines from the file and computes 19 all necessary data along with it In this way a one hour jump in a busy session may take a few minutes to skip Connect Disconnect Close Probably not necessary to write too much about these buttons 2 2 Voice communication setup The voice communication setup dialog All settings around voice communication can be setup using the following dialog Voice communication setup Frequency Voice server 135 300 129 700 132 370 119 500 131 900 134 550 121 900 122 970 133 200 130 570 126 950 IHMC TAD 1909F ann rw liveatc net rw liveatc net rw liveatc net nw liveatc net nw liveatc net nw bostonartcc net nw liveatc net nw bostonartcc net nw liveatc net rw liveatc net rw liveatc net nw liveatc net nw liveatc ne
195. tsim metacraft com satnet data txt 74 It is a very simple modal dialog to setup some non display related settings such as ASEL and FREQ keys and the actual squawk range gt Key options gt Aircraft select key Set button In front of the Set button you can read the actual name of the aircraft select button The default value is the numpad To change it press the Set button then the desired aircraft select button gt Primary frequency send key Set button In front of the Set button you can read the actual name of the primary frequency button The default value is the numpad To change it press the Set button then the desired aircraft select button gt Squawk options gt Squawk interval edits Here the actual squawk interval is displayed You also can override them here But if you change your position the actual squawk range will be reloaded from the positions section of the ESE file gt VFR squawk Here you can specify the VFR squawk Entering the VFR code here will remove the DUPE warning for VFR airplanes squawking that code gt Assign random squawks checkbox if this box is checked EuroScope assigns random Squawk numbers in the defined squawk range If it is unchecked EuroScope assigns squawk numbers from the beginning and incrementing in sequential order It checks if the next Squawk number is free and if so assigns it to the selected aircraft gt WTC symbols gt WTC four categories Here are predef
196. ttings to files with x ASR extensions When you start EuroScope it will load the lastly opene ASR file But if you start it for the first time then you surely do not have such file In this case the default settings will be applied to your first screen It will contain only only the VOR symbols airport names high airway lines and ARTCC boundaries Be sure to open the Display settings dialog to switch on and off the individual items modify the radar layout to your taste and save it into an ASR file for your next session If yo do not like the default coloring or line styles just go to the Symbology settings dialog and change gt VATSIM statistics data As you started EuroScope selected the sectorfile just wait for 10 30 seconds After that period of time the radar screen comes alive and displays controllers and planes just as you were online That is because EuroScope incorporates with VATSIM statistics data It downloads data about the online members and starts simulating them while you are offline But in this state you can start analyzing the traffic see who is online what is next on VATSIM Tip Open the Voice Settings dialog select any position as primary frequency and the radar screen will be displayed as you were online with that callsign of the voice connection name and frequency What You Hear Before going online you should go to the Voice Communication Setup dialog to define your voice connections furthermore to press the Hard
197. tton description gt METAR station edit Here you can ask for a METAR of a station Type the station name here gt Connect ATIS button This is a new button here in this dialog Originally it was on the Connect Dialog but we found it much more convenient to to all voice ATIS related work here in this form Therefore this button is used to make your secondary VATSIM connection to serve as Voice ATIS controller The button is enabled only in case you have a live direct connection to VATSIM The ATIS airport in fromt will be used for the callsign gt Disconnect ATIS button Use it to disconnect the ATIS controller It is available only when you are connected ATIS connect status Just next to the Disconnect ATIS button there is a status field It shows the actulal status of the voice ATIS connection gt Get METAR button This button gets the METAR of the selected station If it is the first time you use it then nothing will happen when you press it as it may take some seconds to receive the information back from the servers SO press i again in some seconds gt Current ATIS letter and and buttons The current ATIS letter is displayed in the toolbar of the main window By pressing th and buttons you can change it These buttons are also scan the Text ATIS and multiple record ATIS and if the current atis letter is found there in a separated place separated means space letter space then it will be replaced by the new lette
198. tween each route element An example of a routing below SIDSSTARS STAR LROP 08R TUSET2E TUSET BAREM MADIT OBELA OPW STAR LROP 08L TUSET2E TUSET AMETI ABATU DILAS OTL STAR LROP 26L TUSET3F TUSET FLR AMODA LEVTA OPE STAR LROP 26R TUSET3F TUSET FLR AMODA RARIT OTR STAR LROP 08R VALPA1LE VALPA FLR OBELA OPW STAR LROP 08L VALPA1LE VALPA FLR DILAS OTL STAR LROP 26L VALPA2F VALPA FLR AMODA LEVTA OPE STAR LROP 26R VALPA2F VALPA FLR AMODA RARIT OTR SID LROP 08R VALPA1A OPE BSE BSW MEGIK VALPA SID LROP 08L VALPA1A OTR BSE BSW MEGIK VALPA SID LROP 26L VALPA1C OPW FLR VALPA SID LROP 26R VALPA1C OTL FLR VALPA SID LROP 08R NILOV1A STJ NILOV SID LROP 08L NILOV1A STJ NILOV SID LROP 26L NILOV1C OPW NILOV SID LROP 26R NILOV1C OTL NILOV The positions section This section contains information about all recognized controller positions It is used to recognize what controller is what position using information from the callsign and the frequency This is a slightly modified POF file used before in ASRC and VRC Users may simply copy that file and modify it accordingly The format of the Position line is the following lt name of position gt lt radio callsign gt lt frequency gt lt identifier gt lt middle letter gt lt prefix gt lt suff1ix gt lt not used gt lt not used gt lt A code start of range gt lt code end of range gt lt VIS centerl latitude gt lt VIS centerl longitude gt The name of the
199. ual Sids elements of the SIDs section gt Low airways switch ON OFF each airway line name gt High airways switch ON OFF each airway line name gt ARTCC high boundary switch ON OFF sections of high sector boundary ARTCC boundary switch ON OFF sections of sector boundary gt ARTCC low boundary switch ON OFF sections of low sector boundary gt Geo switch ON OFF Geo data coastlines rivers lakes other lines of under the Geo section gt Free text switch ON OFF free text label items NEW in EuroScope text labels can be programmed on the radar screen e g for min sector altitudes or taxiway names In addition to allowing to switching the items ON OFF EuroScope also allows different attributes of each symbol color font size line width line type etc that users can set up this will be shown in details in the Symbology settings section 78 3 8 Symbology settings Similar to Display settings the settings in the symbology settings window gives a controller some new tools EuroScope allows to have different colors line width or fonts for every individual item on the radar screen Click on cc Symbology settings and the ollowing dialog will appear Symbology dialog E x Color E Fill VOR symbol ie Fill NDB symbol bakes ii P i I Fill FIX symbol Cancel Line weight z I FWaIRPORT symbol Seah Line style p Fill PLANE symbol Text alignment E Airports Low ai
200. uated there as well gt Saircraft The callsign of the selected aircraft gt Salt The temporary or the current altitude if no temporary is specified of the selected aircraft gt altim station The altitude pressure value from the METAR of the station For availability see metar gt Sarr The destination airport of the selected aircraft gt arrrwy airport ICAO code A comma separated list of the runways set as active for arrivals gt atccallsign handoffid The callsig of the specified controller If empty then the logged in controller callsign gt atisairport The ICAO code of the airport selected to be served with voice ATIS in the _Voice_ATIS_ dialog gt Satiscode The actual ATIS letter specified in the _Voice_ATIS_ dialog gt bear position It returns the bearing of the selected aircraft to the specified position Position can be vor ndb fix or airport gt calt The current altitude of the selected aircraft gt callsign The login callsign of the controller gt com coml1 The primary frequency of the controller It will return 199 998 if no primary frequency is selected S cruise The final cruise altitude of the selected aircraft gt dep The departure airport of the selected aircraft gt deprwy airport ICAO code A comma separated list of the runways set as active for departures gt dist position It returns the distance of the selected aircraft to the specifi
201. ulation scenario file with full path gt server the lastly connected VATSIM server gt Recent Files section It is a simple numbered list of your lastly used ASR files The files here will be displayed in the SCT menu gt Settings section In this section there are data about how your environment are set up What configuration files do be loadedand what hardware elements do you use gt aircraft full path to the ICAO Aircraft file gt airlines full path to the ICAO Airlines file gt airports full path to the ICAO Airports file 12 gt airways full path to the FSNavigator database gt alias full path to the alias file gt Asel Key the aircraft select key code gt Atis Folder full path to the voice ATIS description file gt Freq Key the primary frequency key code gt ipaddr full path to the VATSIM server descriptor file gt sector the main sectorfile as it is from the last session it may be better to put to the Last Session section gt Settings File full path to the settings file many installation independent data is stored there gt Sounds section Full path of the file names used for voice messages They are not self explanatory just numbered gt Voice section Here are the settings about your sound hardware configuration gt bass filter enable or disable bass filtering gt input_hardware the primary mike input device name gt input _hardware2 the secondary mike input
202. veral keyboard tricks Function keys and other key shortcuts This paragraph describes the meaning of several keyboard elements which behave differently than a simple text editor Many things come from ASRC so if you have ever used ASRC you will find them familiar However in some cases we changed the meaning of the key completely or made it work Slightly different gt Fi key As in EuroScope the TAG up and TAG down is available with a double click on the TAG this key has been freed up Its role is to accelerate issuing commands that are important yet not so often used When you first press the F1 key then F1 will appear in the command line Then there are some shortcuts Fi a changes to am Fi c changes to chat Fi d changes to distance Fi f changes to find Fi i changes to inf Fi k changes to kill Fi s changes to sep Fi u changes to SS Fi w changes to wait gt F2 key It simply places the QD command to the command line to display METAR information on selected stations gt F3 key It places the QT command to the command line to start tracking an aircraft or to accept handoff Like contacme it also works on the aircraft that is under the cursor making it very simple to accept handoffs gt F4 key 85 It places the QX command to the command line to drop an aircraft or initiate handoff Like contacme it also works on the aircraft that is under the cursor Important QX without parameter initiate
203. ving your mouse as you are over a Tagged up TAG it will change to Detailed and you will see even more information about the aircraft At one time only one TAG can be detailed And on a detailed TAG you can have several function connected to the part of the TAG gt Unidentified This is also unique This TAG is used whenever an aircraft is flying at least it is supposed from the GS but does not squawk C then this TAG will be displayed Of course if you select that you would like to see standby aircraft too then this mode is not used at all How a TAG is built up Every TAG in EuroScope is built up from TAG items The available TAG items are defined by the system All such item has a piece of code that calculates the actual string to be displayed every time There are items that always have content they are never empty but there can be ones that are sometimes empty display nothing There is a special item the Next line item that never displays anything but creates a new line So that the only thing that you should do is to make a list of these items and it will form a TAG that can be displayed The following TAG items are defined at this moment in EuroScope gt Aircraft category The weight turbulence category of the aircraft The actual symbols can be modified via the General Settings dialog gt Aircraft category with slash The same as the above one but starts with a letter gt Aircraft type The sort name of the aircraft type
204. ware setup button and configure your sound hardware with the Voice Hardware Test And Setup dialog Without that you will not be able to listen to or talk to anyone How To Use Existing Sector And Position Files To be able to use all of the features of EuroScope one have to create a sector file extension This is a real hard work and needs special knowledge of the area you are controlling within The ESE files Should be created by the appropriate staff members of your FIR We are ready to support all ESE file related questions via the support e mail But to be able to start quickly you should do the following modifications Edit the runway section in the SCT file Add the airport name or code to the end of each line Original RUNWAY 13L 31R 130 310 NO47 26 43 520 E 019 15 27 180 N0O47 25 22 620 E019 17 37 880 Modified to RUNWAY 13L 31R 130 310 N0O47 26 43 520 E019 15 27 180 N047 25 22 620 E019 17 37 880 LHBP Ferihegy To use your POF file simply rename it to the same name as your SCT file with the extension ESE eg You have myfir sct and mypos pof then rename the mypos pof to myfir ese Then add a new line to the beginning of the file POSITIONS In this way you will be able to use both the sector and the position file without hard modification 1 1 Installation If You Have A Previous Release Installed The installer of the new release will execute an uninstall of the previous version The uninstaller will delete all files
205. what others can hear from you gt Close Just to be complete gt Connected users list box This list box is filled with the users who are currently joined to the voice room of the selected line Your callsign will be flagged by an The check boxes In the top area there is a list control with all the ground to air communications definitions Every line contains six check boxes With them you can manage the status of your voice connections gt Prim as Primary frequency By clicking any of the check boxes in this row will select your primary frequency This frequency along with the voice channel definition will be populated via the network so pilots will ba able to find your voice using this data Important By selecting the primary frequency you are not being connected to the voice server You should do it manually 21 When you select your primary frequency the text send and receive check boxes are set automatically and you can not deselect them If another primary frequency was selected before it will be cleared You can deselect your primary frequency by clicking on the check box again it will not deselect the text send and receive flags The primary frequency description line is highlighted by yellow background even when not selected If you select your primary frequency when offline then EuroScope will assume that you are logged in as the name of the voice communication and with the frequency By that all the sectors define
206. wk error gt Duplicated squawk flag gt CLAM RAM warning gt Departure aerodrome The departure airport extracted from the flight plan gt Destination airport The destination airport extracted from the flight plan gt Destination airport switchable Same as the previous but can be switched off by the controller to reduce the size of the TAG gt Destination ETA Estimated time of arrival to destination airport gt Direct to point name If a direct is given to the specified aircraft then the name of the point can be displayed by this item gt Duplicated squawk If the assigned squawk is used by another aircraft then a static DUPE string Otherwise empty gt Emergency indicator If the aircraft is squawking 7700 then a static EMG string Otherwise empty gt Final altitude The final cursing level altitude defined by the flight plan and might be overwritten by the controller gt FIR exit point switchable Same as the previous but can be switched off by the controller to reduce the size of the TAG gt FIR exit point name The name of the next point from the flight plan route that is defined as FIR exit point in the sector file extension If no such point then it is empty gt Flight rule The flight plan route I V S gt Ground speed with N The ground speed of the aircraft with an N letter in front gt Ground speed with N switchable Same as the previous but can be switched off by the controller to
207. xit your sector with adjacent controllers You can use it to assign direct points within your sector If the plane has owner ans is going to come to your sector then it opens the COPN point list If you are tracking the AC the it opens the COPX point list In that list all points are masked if it is going to start a coordination and with which controller or not gt Open COPxX altitude coordination list This function is part of the ongoing coordination feature and allows you to coordinate an altitude at which an aircraft shall leave your sector with adjacent controllers This function is not available if someone else is tracking the aircraft gt Open COPX point coordination list This function is part of the ongoing coordination feature and allows you to coordinate a different routing an aircraft shall leave your sector on with adjacent controllers This works similar to giving a direct the only difference is that the direct is a recommendation to the other controller that he accept or refuse If you select the point with LEFT click it sets the direct or starts the coordination according with the flags Using the RIGHT button you can assign direct point beyond the sector exit gt Open final altitude popup list This function pops up a list with the possible final altitude values to be assigned It has no real meaning to add this function other than the final altitude item This function is not available if someone else is tracking the aircr
208. y gt Runways set attributes for each runway centerline extended centerline and name gt Datablock set attributes for aircraft datablocks tags that are non concerned notified assumed redundant information emergency and detailed background active item background gt Controller set attributes for controllers in modes normal breaking timeout gt Metar set attributes for normal modified timeout METAR info text gt Other set attributes for wait distance line distance values distance annotation separation leader find valid airway bad_ direction airway unconnected airway direct no airway route annotation freetext gt Transitions set attributes for individual transitions and transition grids gt Title set attributes for items on the title line such as datafile controller primfreq normal primfreq breaking clock gt Chat set attributes for items related to chat and chat windows such as text background name normal name unread gt Sector set attributes for sector line active sector background inactive sector background gt Transparent AC list background if selected the background of the aircraft coordination lists SIL SEL DEP is transparent 79 gt Transparent AC list selected item background if selected the currently selected aircraft won t be highlighted in the lists gt Transparent datailed TAG background if selected the background of detailed tags will be transparent gt Transparent dataile
209. y you can press several times if the desired point is later in the route gt Skip button it needs a selected AC This button deletes the next waypoint from the route string It does not change the actual course but makes a shortcut after it gt Pause button after the Ac status it needs a selected AC By pressing this button you can pause the movement of an individual aircraft gt Go button it needs a selected AC By pressing this button you can start a paused aircraft gt Handoff button it needs a selected AC This button initiates a handoff to the trainee To use the aircraft should be tracked by one of the simulated controllers 98 gt Taxi button it needs a selected AC The taxi button is a general purpose ground movement Simulation You can use it to simulate taxi pushback and line up instructions When you press the button you will have a rubber line following your mouse from the current aircraft position Press the left mouse any number of times to define all the points to follow on the ground When you are ready press the right button The aircraft will start taxiing immediately gt Fast taxi it needs a selected AC Sometimes we need the aircraft to go on the ground a little bit faster then the programmed taxi speeds e g when it is still on the runway and you need it to vacate In fast taxi mode it moves much faster gt Takeoff buttons it needs a selected AC Here you have the four runway buttons

EuroScope User Guide for version 3.0a

Contents

Download Pdf Manuals

Related Search

Related Contents