high pressure pump for airmix® and airless spraying
Contents
1. Z Kremlin Rexson HIGH PRESSURE PUMP FOR AIRMIX AND AIRLESS SPRAYING TROUBLESHOOTING TRANSLATION OF THE ORIGINAL MANUAL IMPORTANT Before assembly and start up please read and clearly understand all the documents relating to this equipment professional use only THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE KREMLIN REXSON 150 avenue de Stalingrad 93 245 STAINS CEDEX France 33 0 1 49 40 25 25 Fax 33 0 1 48 26 07 16 www kremlin rexson com KREMLIN REXSON N 578 029 110 UK 1106 CAUSE The pump does not start Priming trouble gt Airis always coming out from the spray gun gt Air or material does not come out from the spray gun The pump does not stop at once when shutting off the spray gun gt The pump stops only on down stroke gt The pump stops only on up stroke The pump does not reverse On intensive pump the lubricant into the cup is fastly coloured On FLOWMAX pump leakage of fluid at the bottom of the air motor Spraying trouble Decrease of material flow KREMLIN REXSON 1 SOLUTION Check the pump air supply Be sure that the spray gun is fully opened and air evacuated through this one Air intake at the fitting or at the suction rod Check the pump valves If a valve is sticked by dry paint it can be unsticked without disassemblying it Blow air pressure directly2. by suction fitting Check exhaust valve or valve seal Check suction valve or upper cartridge Check spring of the air motor reversing block Lubricate reversing block with HP 150 oil Check if there is pilot air depending on air motor model Check the upper packing tighten the cup or change seals if it is necessary Check bellow Refer to spray gun manual Refer to filter instruction manual N 578 029 110 UK 1106
Download Pdf Manuals
Related Search