Operating instructions
Contents
1. After the warm up time and before starting the waxing operation you should check the wax temperature by means of the digital thermometer REF 65002 Put the impression onto the immersion sieve immerse the impression into the wax and finally remove it again After a short cooling time you can take out the waxed impressions of the sieve Melting of duplicating gel for the manufacturing of negative molds The container is adequately filled with duplicating gel REF 40900 TIP For a fast and gentle melting we recommend reducing the duplicating gel into small pieces Switch on the device with the controlling thermostat to adjust the required temperature Slowly warm up the dupli cating gel up to 93 C 199 F and regularly check the temperature with the digital ther mometer REF 65002 Please take care that the duplicating gel does not overheat After melting homogeneously the duplicating gel it is cooled down by reducing the temperature at the controlling thermostat down to 45 C 48 C 113 F 116 6 F As soon as the duplicating gel has reached its temperature it can be filled into the invest ment form Please also adhere to the processing instructions for the duplicating gel Refill or exchange of the immersion wax or duplicating gel It may occur that the level of the immersion wax or gel becomes lower in the course of time Bear in mind to have a sufficient amount of immersion wax and or gel on stock You can al ways t2. technology and is easy to use For the temperature control of the immersion wax and or the duplicating gel we recom mend the digital thermometer REF 65002 as well as the appropriate support REF 65007 In addition to that we would also recommend the dipping sieve REF 65004 to immerse and remove the impressions in a comfortable way Safety regulations The electrical immersion unit and duplicating device is used to heat up dip ping waxes and or duplicating gel A use other than described in the operat ing instructions may lead to injuries of the operator or of third persons Fur thermore the device or other material assets may be damaged Therefore the device must be used in technically perfect condition only and the safety regulations must be strictly complied with Usage according to the regulations Protect the unit from dust Use the unit on dry working places only Qualified and trained persons must use the device only Use the unit in perfect conditions only Before putting the device into operation the user has to read the oper ating instructions and ask the manufacturer in case of questions Connect the device to permissible sockets only e Please adhere to the accepted safety regulations e Before switching on the unit make sure that the container is filled with immersion wax or duplicating gel please also adhere to the processing manual for each material to be worked with e Do not pull the
3. 5007 Diving sieve REF 65004 Operating instructions Assembling and connecting the unit The electrical wax immersion unit corresponds to the state of the art standards and to the acknowledged safety regulations nevertheless dangers can arise Please observe the follow ing before putting the unit into operation Unit must be operated by qualified persons only Observe the recognized industrial safety regulations Unit must be used in technically perfect condition only and in compliance with the user instructions Put the device horizontally and place it in its suitable working position Protect the unit against vibrations Check whether the unit is dry Check whether the device is in technically perfect condition especially the mains cable Depending on the required usage fill the container with immersion wax or duplicating gel It should be filled as much immersion wax so that the impressions are well covered Close the wax container with the stainless steel lid Plug in the mains cable 65005 VO1 Seite Page 10 von of 12 4 1 4 2 4 3 egger Working with the materials The unit is used to melt waxes or duplicating gels Never use the unit without filling the con tainer with duplicating gel or immersion wax Waxing of ear impression takings molds The container is adequately filled with immersion wax REF 41201 Turn on the unit via the thermostat and the required temperature see wax process instructions
4. egger Operating instructions Wax immersion unit and duplicating device REF 65005 230 V REF 65001 115 V wer ek Please read carefully the user instructions before working with the unit Keep the user instructions in a safe place for subsequent usage Important Information Warning a A 65005 VO1 Seite Page 7 von of 12 egger Index Page 1 General 9 2 Safety regulations 9 2 1 Usage according to the regulations 9 3 Installation 10 3 1 Scope of delivery 10 3 2 Technical data 10 3 3 Spare parts and accessories 10 3 4 Assembling and connecting the unit 10 4 Working with the materials 11 4 1 Waxing of ear impression taking molds 1 4 2 Melting of duplicating gel for the manufacturing of negative molds 11 4 3 Refill or exchange of the immersion wax or duplicating gel 11 5 Service After sales service Warranty 12 65005 VO1 Seite Page 8 von of 12 2 1 egger General The electrical wax immersion unit and duplicating device can be used for two different kinds of manufacturing of otoplastics and ITE shells a for the waxing of ear impression takings molds with high quality immersion wax REF 41201 b for the melting of duplicating gel REF 40900 for the manufacturing of negative molds The unit is equipped with a heating plate as well as a material hopper including a lid to pro tect the device against impurity The device was built according to state of the art
5. mains plug out off the socket at the mains cable e Should the mains cable be damaged it must be replaced at once De fective mains cables must not be used e The device must be repaired by the manufacturer only e The unit must be switched off during service and maintenance opera tions cleaning replacing of the immersion wax or duplicating gel Pull the mains plug before e Do not use any dissolvent when cleaning the device We generally rec ommend surface cleaners Art Nr 31601 ff Do not immerse the unit in liquids e Children must be kept away from the unit O If other spare poarts are used all guarantee and liability claims will become ex tinct 65005 VO1 Seite Page 9 von of 12 3 1 3 2 3 3 3 4 egger Installation Handling and Initial Operation Scope of delivery Please check whether the delivery is complete and whether all parts are free from transport damage Immediately inform us or the distributor about missing parts or transport damage Device consists of 1 heating plate 1 container with content of 0 9 liter 30 fl oz 1 lid 1 US adapter only with 115 V version 1 operating instructions Technical data Power supply 230 V 115V Connection mains plug Schuko German 115 V version with US adapter Power input 500 W Spare parts and accessories Lid for container REF 65011 Container REF 65013 Digital thermometer REF 65002 Support for thermometer REF 6
6. op up the material in the container with new one Note By melting the duplicating gel several times the material can become cloudy Before each maintenance the device must be separated from the mains supply Hot materials have to be cooled down otherwise danger of burning Move or transport the unit only in cooled condition 65005 VO1 Seite Page 11 von of 12 egger Service After sales service Warranty Warranty The warranty period for our devices starts with the date of delivery and is 12 months Ex cluded from the guarantee are modifications of the unit as well as all other parts of the unit which are subject to wear and tear In case of improper handling of the electrical wax immersion unit and duplicating device all liability and warranty claims will become extinct We will be pleased to be of assistance to you in case of damage or other malfunctions egger Otoplastik Labortechnik GmbH Please indicate the following data Aybthlweg 59 87439 Kempten Germany Phone 49 831 58113 60 Fax 49 831 58113 14 email sales egger labor de Internet www egger labor com Type of unit Electrical wax immersion and duplicating unit REF 65005 for 230 V REF 65001 for 115 V See label 65005 VO1 Seite Page 12 von of 12
Download Pdf Manuals
Related Search