lnstallation manual cateqorv AQ (aluminum mudguards)
Contents
1. Di HAAN METAALTECHNIEK BV Installation manual category AQ aluminum mudguards General This installation manual is intended for assembly of De Haan aluminum mudguards type coding AQ The mudguards are exclusively intended for use of category O1 and O2 vehicles Before installation and first use of the mudguard the installation instructions should be read carefully The installation must be carried out correctly and exclusively by a competent person Preparation Wear gloves at all times when handling the mudguard The mudguard has sharp edges Make sure you have the correct tools for assembly Take note of guidelines 91 226 EEC 2010 19 EU and mount the mudguards according to the requirements specified herein See http eur lex europa eu LexUriServ LexUriServ do uri OJ L 2010 072 0017 0037 NL PDF Mudguard installation to the side of a trailer All AO category mudguards have to be obtained with holes before use Drill at least 4 holes for assembly In case of a tandem mudguard one has to drill at least 5 holes We recommend using M8 screws and locknuts together with washers of 30 x 8 x 2mm Make sure these won t come loose due to vibration of the trailer mudguard Assembly tools are not included Mudguard installation using brackets Use at least two brackets with a width of minimum 30 mm The mudguard must be fixed both at the front and at the rear bracket with at least 2 screws Make sure these won t co2. ended for installation and use on category O1 and O2 trailers Declaration hereby declare that the above products comply with the guidelines and standards set out in this Declaration Date 16 of July 2013 Ingeborg de Haan Managing Director De Haan Metaaltechniek B V De Haan Metaaltechniek bv Visiting adress Amersfoortsestraat 68b 3769 AL Soesterberg Mailing address Postbox 18 3769 ZG Soesterberg Telephone 31 0 346 333300 E mail info de haan nl Website www de haan nl
3. me loose due to vibration of the trailer mudguard maintenance Depending on the method of installation the mudguard can carry up to 90kg The carried weight can be increased by combining side installation and installation with brackets The mudguard should be cleaned with clear water after contact with dirt or salt Never overlay a wet mudguard Never put any weight on the mudguard After some time the mudguard will shine less This is a natural process and does not affect the quality of the material The mudguard should be replaced when the original form is affected due to damage De Haan Metaaltechniek bv Visiting adress Amersfoortsestraat 68b 3769 AL Soesterberg Mailing address Postbox 18 3769 ZG Soesterberg Telephone 31 0 346 333300 E mail info de haan nl Website www de haan nl Diz HAAN METAALTECHNIEK BV Declaration of Conformity Manufacturer Name De Haan Metaaltechniek B V Address Amersfoortsestraat 68b 3769 AL Soesterberg The Netherlands Details Product name Mudguards Aluquintet Model numbers AQ Trade Name De Haan Metaaltechniek B V Tested guidelines and standards Guidelines e Splash water drain system 91 226 EEG 2010 19 EU Machine guidelines 2006 42 EG Standards e NEN EN 10346 2009 e NEN EN 10143 2006 e NEN EN ISO 12100 2010 o DIN 17162 Additional information e Risk assessment is carried out according to NEN EN ISO 12100 2010 Mudguards are int
Download Pdf Manuals
Related Search