USER MANUAL - Keene Electronics
Contents
1. Kramer Electronics will at its sole option provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty 1 Elect to repair or facilitate the repair of any defective parts within a reasonable period of time free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condition Kramer Electronics will also pay the shipping costs necessary to return this product once the repair is complete 2 Replace this product with a direct replacement or with a similar product deemed by Kramer Electronics to perform substantially the same function as the original product 3 Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty What Kramer Electronics will not do Under This Limited Warranty If this product is returned to Kramer Electronics or the authorized dealer from which it was purchased or any other party authorized to repair Kramer Electronics products this product must be insured during shipment with the insurance and shipping charges prepaid by you If this product is returned uninsured you assume all risks of loss or damage during shipment Kramer Electronics will not be responsible for any costs related to the removal or re installation of this product from or into any installation Kramer Elec2. connected to a ground terminal on the units at both ends use the ground terminal of the power supply connection if necessary For a TP cable exceeding a distance of 50m separate power supplies should be connected to the transmitter and to the receiver simultaneously Shielded Twisted Pair STP Unshielded Twisted Pair UTP We recommend that you use Shielded Twisted Pair STP cable and stress that the compliance to electromagnetic interference was tested using STP cable There are different levels of STP cable available and we advise you to use the best quality STP cable that you can afford Our non skew free cable Kramer BC STP is intended for analog signals where skewing is not an issue In cases where there is skewing our Unshielded Twisted Pair UTP skew free cable Kramer BC XTP may be advantageous and UTP cable might also be preferable for long range applications In any event when using UTP cable it is advisable to ensure that the cable is installed far away from electric cables motors and so on which are prone to create electrical interference 4 Your XGA Line Transmitter s Receiver This section defines the XGA Line Transmitter s Receiver e WP 110 XGA Line Transmitter see Section 4 1 e PT 120 XGA Line Receiver see Section 4 2 e TP 120 XGA Line Receiver see Section 4 3 4 1 Your WP 110 XGA Line Transmitter The WP 110 is available in three versions US Belgium and Germany and UK and most of
3. Europe excluding Belgium and Germany as defined in Figure 1 KRAMER wP 110 Version for Belgium and Germany KRAMER 0 wP 110 Version for UK and most of Europe Version for USA Figure 1 WP 110 XGA Line Transmitter KRAMER Ea WP 110 PT 120 TP 120 Your XGA Line Transmitter s Receiver Feature Function XGA IN 15 pin HD F Connect to the XGA source Connector GND PIN Connect to the Ground 12V DC PIN Connect to the connector for powering the unit LINE OUT RJ 45 Connects to the LINE IN RJ 45 connector on the PT 120 or Connector TP 120 XGA Line Receiver Use a UTP cable with CAT 5 connectors at both ends the PINOUT is defined in Figure 5 HS Switch Slide the switch to the left by default both switches are set to the right to change the HS horizontal sync polarity to NEG negative polarity down going syncs slide the switch to the right NORM to retain the polarity VS Switch Slide the switch to the left to change the VS vertical sync polarity to NEG negative polarity slide the switch to the right NORM to retain the polarity 4 2 Your PT 120 XGA Line Receiver Figure 2 defines the PT 120 XGA Line Receiver EQ LeveL ON 00 XGA OUTPUT 12V DC Function Connects to the LINE OUT RJ 45 connector on the WP 110 XGA Line Receiver Using a UTP cable with CAT 5 connectors at both ends the PINOUT is defined in Figure 5 Adjusts the ca
4. KRAMER ELECTRONICS LTD USER MANUAL MODELS WP 110 XGA Line Transmitter PT 1 20 XGA Line Receiver TP 1 20 XGA Line Receiver P N 2900 300180 Rev 1 Contents Introduction 2 Getting Started 2 1 Achieving the Best Performance 3 Overview 3 1 WP 110 XGA Line Transmitter 3 2 PT 120 XGA Line Receiver 3 3 TP 120 XGA Line Receiver 3 4 About the Power Connect Feature 3 5 Shielded Twisted Pair STP Unshielded Twisted Pair UTP 4 Your XGA Line Transmitter s Receiver 4 1 Your WP 110 XGA Line Transmitter 4 2 Your PT 120 XGA Line Receiver 4 3 Your TP 120 XGA Line Receiver 5 Using the XGA Line Transmitter s Receiver 5 1 Installing the WP 110 XGA Line Transmitter 5 2 Connecting the WP 110 to the TP 120 5 3 Wiring the CAT 5 LINE IN LINE OUT RJ 45 Connectors 6 Technical Specifications Figures Figure 1 WP 110 XGA Line Transmitter Figure 2 PT 120 XGA Line Receiver Figure 3 TP 120 XGA Line Receiver Figure 4 Connecting the WP 110 to a TP 120 Figure 5 CAT 5 PINOUT OO ODO ONDOD AAR UOUUOUUO NN lt x N mi ak OAOND Introduction Welcome to Kramer Electronics Since 1981 Kramer Electronics has been providing a world of unique creative and affordable solutions to the vast range of problems that confront the video audio presentation and broadcasting professional on a daily basis In recent years we have redesigned and upgraded most of our line making the best even better Ou
5. PLIED WARRANTIES ON THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR THE PARTICULAR PURPOSE SHALL APPLY AS PROVIDED UNDER APPLICABLE LAW Other Conditions This limited warranty gives you specific legal rights and you may have other rights which vary from country to country or state to state This limited warranty is void if i the label bearing the serial number of this product has been removed or defaced ii the product is not distributed by Kramer Electronics or iii this product is not purchased from an authorized Kramer Electronics reseller If you are unsure whether a reseller is an authorized Kramer Electronics reseller please visit our Web site at www kramerelectronics com or contact a Kramer Electronics office from the list at the end of this document Your rights under this limited warranty are not diminished if you do not complete and return the product registration form or complete and submit the online product registration form Kramer Electronics thanks you for purchasing a Kramer Electronics product We hope it will give you years of satisfaction For the latest information on our products and a list of Kramer distributors visit our Web site where updates to this user manual may be found We welcome your questions comments and feedback Web site www kramerelectronics com KRAMER E mail info kramerel com SAFETY WARNING Disconnect the unit from the power supply before opening and servicing
6. THE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS IS NOT RESPONSIBLE FOR DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UNDER ANY OTHER LEGAL THEORY Some countries districts or states do not allow the exclusion or limitation of relief special incidental consequential or indirect damages or the limitation of liability to specified amounts so the above limitations or exclusions may not apply to you Exclusive Remedy TO THE MAXIMUM EXTENT PERMITTED BY LAW THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES REMEDIES AND CONDITIONS WHETHER ORAL OR WRITTEN EXPRESS OR IMPLIED TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IF KRAMER ELECTRONICS CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW THEN ALL IMPLIED WARRANTIES COVERING THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY TO THIS PRODUCT AS PROVIDED UNDER APPICABLE LAW IF ANY PRODUCT TO WHICH THIS LIMITED WARRANTY APPLIES IS A CONSUMER PRODUCT UNDER THE MAGNUSON MOSS WARRANTY ACT 15 U S C A 2301 ET SEQ OR OTHER APPICABLE LAW THE FOREGOING DISCLAIMER OF IMPLIED WARRANTIES SHALL NOT APPLY TO YOU AND ALL IM
7. ble compensation equalization level Degradation and VGA XGA signal loss can result from using long cables due to stray capacitance sometimes leading to a total loss of sharpness in high resolution signals Adjusts the output signal level Use a screwdriver to carefully rotate the trimmer adjusting the appropriate level XGA OUTPUT 15 pin HD F Connect to the XGA acceptor Connector gt z5 pen 3 5 A r o o WP 110 PT 120 TP 120 Your XGA Line Transmitter s Receiver al 4 3 Your TP 120 XGA Line Receiver Figure 3 defines the TP 120 XGA Line Receiver XGA Line Receiver LINEN XGAQUT Figure 3 TP 120 XGA Line Receiver Feature Function Adjusts the cable compensation equalization level LEVEL Trimmer Adjusts the output signal level ON LED llluminates when receiving power 4 LINE IN RJ 45 Connector Connects to the LINE OUT RJ 45 connector on the WP 110 XGA Line Receiver XGA OUT 15 pin HD F Connector Connect to the XGA acceptor le 12V DC 12V DC connector for powering the unit WP 110 PT 120 TP 120 Your XGA Line Transmitter s Receiver 5 1 5 2 Using the XGA Line Transmitter s Receiver You can use the WP 110 XGA Line Transmitter and the TP 120 XGA Line Receiver to configure an XGA to twisted pair transmitter and receiver system Installing the WP 110 XGA Line Transmitter To install your WP 110 XGA Line Transmitter Connect the LINE OUT RJ 45 connector to the pre installed UTP wi
8. ce misuse abuse accident neglect exposure to excess moisture fire improper packing and shipping such claims must be presented to the carrier lightning power surges or other acts of nature This limited warranty does not cover any damage deterioration or malfunction resulting from the installation or removal of this product from any installation any unauthorized tampering with this product any repairs attempted by anyone unauthorized by Kramer Electronics to make such repairs or any other cause which does not relate directly to a defect in materials and or workmanship of this product This limited warranty does not cover cartons equipment enclosures cables or accessories used in conjunction with this product Without limiting any other exclusion herein Kramer Electronics does not warrant that the product covered hereby including without limitation the technology and or integrated circuit s included in the product will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used How Long Does this Coverage Last Seven years as of this printing please check our Web site for the most current and accurate warranty information Who is Covered Only the original purchaser of this product is covered under this limited warranty This limited warranty is not transferable to subsequent purchasers or owners of this product What Kramer Electronics will do
9. eature see Section 3 4 5 On the TP 120 using a screwdriver to carefully rotate the trimmer adjust the output signal level and or cable compensation equalization level if required 6 If necessary set the H SYNC and V SYNC switches on the underside of the WP 110 By default both switches are set for normal H SYNC and V SYNC polarity VGA LL oss Vy A SRN D gt Computer Display Graphics Source Figure 4 Connecting the WP 110 to a TP 120 WP 110 PT 120 TP 120 Using the XGA Line Transmitter s Receiver 5 3 Wiring the CAT 5 LINE IN LINE OUT RJ 45 Connectors This section defines the CAT 5 pinout using a straight pin to pin cable with RJ 45 connectors Note that the cable ground shielding must be connected soldered to the connector shield EIA TIA 568B Figure 5 CAT 5 PINOUT PIN Wire Color 4 Bue 6 Green rs Bom 12 45 78 36 WP 110 PT 120 TP 120 Using the XGA Line Transmitter s Receiver 6 Technical Specifications WP 110 PT 120 TP 120 INPUTS 1 VGA UXGA on a 1 RJ 45 LINE IN 1 RJ 45 LINE IN 15 pin HD connector connector connector OUTPUTS 1 RJ 45 LINE OUT 1 VGA UXGA ona 1 VGA UXGA ona connector 15 pin HD connector 15 pin HD connector MAX OUTPUT 1 5Vpp 1 4Vpp LEVEL RESOLUTION Up to UXGA DIFF GAIN 2 9 worst case for the transmitter receiver pair DIFF PHASE 0 3Deg worst case 2 K FACTOR lt 0 05 7 S N RATIO 69dB worst case CONTROLS Le
10. eiver The Kramer Pico TOOLS PT 120 is an XGA line receiver that receives a coded CAT 5 signal transmitted by the WP 110 decodes it and converts it to an XGA output In particular the PT 120 e Has an operating range of more than 300ft more than 100m using standard CAT 5 cable and the WP 110 e Includes EQ and level controls e Has the power connect feature and is 12V DC fed 3 3 3 4 3 5 TP 120 XGA Line Receiver The Kramer TOOLS TP 120 is an XGA line receiver that receives a coded CAT 5 signal transmitted by the WP 110 decodes it and converts it to an XGA output In particular the TP 120 e Has an operating range of more than 300ft more than 100m using standard CAT 5 cable and the WP 110 e Includes EQ and level controls e Has the power connect feature and is 12V DC fed About the Power Connect Feature The Power Connect feature applies as long as the cable can carry power This feature is available when using STP cable and the distance does not exceed 50m 164ft on standard CAT 5 cable For longer distances heavy gauge cable should be used TP cable is still suitable for the video audio transmission but not for feeding the power at these distances For units which are connected via RJ 45 connectors make sure that the shield of the STP cable is connected to the metal casing of the connectors on both ends of the cable For units which are connected via terminal block connectors the shield of the STP cable must be
11. ity cables Do not secure the cables in tight bundles or roll the slack into tight coils Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer WP 110 PT 120 or TP 120 away from moisture excessive sunlight and dust Caution No operator serviceable parts inside the unit Warning Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning Disconnect the power and unplug the unit from the wall before installing 3 3 1 3 2 Overview This section describes e A summary of the WP 110 XGA Line Transmitter see Section 3 1 e A summary of the PT 120 XGA Line Receiver see Section 3 2 e Asummary of the TP 120 XGA Line Receiver see Section 3 3 e The power connect feature see Section 3 4 e Using shielded twisted pair STP unshielded twisted pair UTP see Section 3 5 WP 110 XGA Line Transmitter The Kramer Wall Plate WP 110 is an XGA line transmitter that receives an XGA signal and transmits it over a CAT 5 cable to the PT 120 or TP 120 receiver The WP 110 is available in three versions one for USA one for Belgium and Germany and one for UK and most of Europe excluding Belgium and Germany In particular the WP 110 e Has a resolution of up to UXGA e Can use the simplest UTP CAT 5 cables however it benefits from better quality cables e Has the power connect feature and is 12V DC fed PT 120 XGA Line Rec
12. r 1 000 plus different models now appear in 11 groups that are clearly defined by function GROUP 1 Distribution Amplifiers GROUP 2 Switchers and Routers GROUP 3 Control Systems GROUP 4 Format Standards Converters GROUP 5 Range Extenders and Repeaters GROUP 6 Specialty AV Products GROUP 7 Scan Converters and Scalers GROUP 8 Cables and Connectors GROUP 9 Room Connectivity GROUP 10 Accessories and Rack Adapters and GROUP 11 Sierra Products Thank you for purchasing the Kramer wall plate WP 110 XGA Line Transmitter Kramer Pico TOOLS PT 120 XGA Line Receiver and or Kramer TOOLS TP 120 XGA Line Receiver which are ideal for e Presentation and multimedia applications e Long range graphics distribution for schools hospitals security and stores Introductior 2 Getting Started We recommend that you Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual Use Kramer high performance high resolution cables Go to http www kramerelectronics com to check for up to date user manuals application programs and to check if firmware upgrades are available where appropriate 2 1 Achieving the Best Performance To achieve the best performance Use only good quality connection cables to avoid interference deterioration in signal quality due to poor matching and elevated noise levels often associated with low qual
13. ring in the wall box opening that connects via UTP cabling to the LINE IN RJ 45 connector of the PT 120 or TP 120 Connect your 12V DC power supply to the POWER SUPPLY pins taking care that polarity is correct Connect the wire labeled to the 12V pin and the wire labeled to the GND pin Insert the WP 110 directly into the wall box opening and then mount the front panel securely using the screws Connect the XGA source to the XGA IN 15 pin HD F connector Connecting the WP 110 to the TP 120 To connect the WP 110 XGA Line Transmitter to the TP 120 XGA Line Receiver as the example in Figure 4 illustrates do the following 1 0 PT 120 On the WP 110 connect the XGA source for example the 15 pin HD output from a computer s graphics card to the XGA INPUT 15 pin HD F connector On the TP 120 connect the XGA OUT 15 pin HD F connector to the XGA acceptor for example a monitor Connect the LINE OUTPUT RJ 45 connector on the WP 110 to the LINE IN RJ 45 connector on the TP 120 via UTP cabling with a range of more than 300ft gt 100m On both the WP 110 and the TP 120 connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity The signal from the XGA source is transmitted via CAT 5 cable decoded Using the XGA Line Transmitter s Receiver and converted at the XGA OUT 15 pin HD F connector to the XGA acceptor For details of the power connect f
14. tronics will not be responsible for any costs related to any setting up this product any adjustment of user controls or any programming required for a specific installation of this product How to Obtain a Remedy under this Limited Warranty To obtain a remedy under this limited warranty you must contact either the authorized Kramer Electronics reseller from whom you purchased this product or the Kramer Electronics office nearest you For a list of authorized Kramer Electronics resellers and or Kramer Electronics authorized service providers please visit our web site at www kramerelectronics com or contact the Kramer Electronics office nearest you In order to pursue any remedy under this limited warranty you must possess an original dated receipt as proof of purchase from an authorized Kramer Electronics reseller If this product is returned under this limited warranty a return authorization number obtained from Kramer Electronics will be required You may also be directed to an authorized reseller or a person authorized by Kramer Electronics to repair the product If itis decided that this product should be returned directly to Kramer Electronics this product should be properly packed preferably in the original carton for shipping Cartons not bearing a return authorization number will be refused Limitation on Liability THE MAXIMUM LIABILITY OF KRAMER ELECTRONICS UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR
15. vel 7 7dB to Level 7 5dB to 3 1dB 130m 4 4dB 130m EQ 0dB to 25dB EQ 0dB to 33dB S50MHz 50MHz POWER 12V DC 230mA max 12V DC 260mA max 12V DC 230mA max SOURCE OPERATING TEMPERATURE 0 to 55 C 32 to 131 F STORAGE TEMPERATURE 45 to 72 C 49 to 162 F HUMIDITY 10 to 90 RHL non condensing DIMENSIONS USA 6 9cm x 3 8cm x 6cm x 6 5cm x 2 5cm 12cm x 7 5cm x 2 5cm 11 4cm 2 72 x 1 5 x 2 36 x 2 56 x 1 4 7 x 0 98 x 2 95 4 5 W D H W D H W D H Belgium and Germany 8cm x 3 8cm x 8cm 3 15 x 1 5 x 3 15 W D H UK and most of Europe excluding Germany and Belgium 8 6cm x 3 8cm x 8 6cm 3 39 x 1 5 x 3 39 W D H WEIGHT 0 14kg 0 31lbs approx 0 14kg 0 31lbs approx 0 3kg 0 66lbs approx ACCESSORIES Power supply OPTIONS 19 inch rack adapters The power source was measured using a pair of units transmitter and receiver Specifications are subject to change without notice at http www kramerelectronics com 0 Technical Specifications LIMITED WARRANTY The warranty obligations of Kramer Electronics for this product are limited to the terms set forth below Whatis Covered This limited warranty covers defects in materials and workmanship in this product What is Not Covered This limited warranty does not cover any damage deterioration or malfunction resulting from any alteration modification improper or unreasonable use or maintenan
Download Pdf Manuals
Related Search