EL Series Hardware User Manual
Contents
1. Communicating with IR security and authentication devices Using IR keyboard mouse and other pointing devices Caution Infrared LED Safety The infrared port located behind the dark window at the front side of the Xtreme PC is classified as a Class 1 LED Light Emitting Diode device according to International Standard IEC 825 1 EN60825 1 This device is not considered harmful but the following precautions are recommended EN If the product requires service contact an authorized Chip PC service center Do not attempt to make any adjustment of the product Avoid direct eye exposure to the infrared LED beam Be aware that the beam is invisible light and cannot be seen Do not attempt to view the infrared LED beam with any type of optical device 29 WWW chippc com 8 1 2 Using the Infrared Port To use the infrared option of the Xtreme PC device to communicate with another device equipped with an infrared port e g PDA Cellular phone etc place both devices such that their infrared ports are facing each other as described in the illustration below LA WU X 30 www chippc com 9 Regulatory Compliance This product has been tested and found to comply with the limits of the regulations needed to receive the following marks EMI EMC FCC Class B CE Mark VCCI Electrical Safety UL1950 cUL Listing CE Mark IEC EN 60950 This product is ENERGY STAR labeled and meets the ENERGY STAR guidelines for2. Attachment WWW chippc com 3 4 Connecting the Cables Connect the cables to their respective ports and connectors as described in the following pictures 3 4 1 Connectors on the Xtreme PC Right Side Keyboard Mouse Port Serial Port Parallel Port Port PS 2 PS 2 COM1 1 Connect the keyboard cable to the purple keyboard PS 2 type port Q A Caution Do not use AT keyboard adapters with the Xtreme PC as connector mechanical damaae mav occur as a result 2 Connect the mouse cable to the green mouse PS 2 type port 9 3 Optional Connect a peripheral device with a serial type connection e g a modem a PDA a bar code scanner a serial printer etc to the DB 9 RS 232 port Secure the connector with appropriate screws 4 Optional Connect a local printer or a peripheral device with a parallel type screws to the DB 25 parallel port Secure the connector with appropriate screws 12 WWW chippc com 3 4 2 Connectors on the Xtreme PC Back Side 5V DC Connector LAN Ethernet Display Connector Connector 10 100 BaseT 1 Connect gne end of a twisted pair 10 100 BaseT Ethernet cable into the LAN RJ 45 jack on the Xtreme PC Plug the network cable s other end into a network jack Once the Xtreme PC has a network connection the LEDs on the connector will be lit The green LED indicates link and the orange LED indicates activity Note In case the LEDs on the LAN connector are not lit check that t
3. Guam and U S Virgin Islands and Canada Export of the SOFTWARE from the United States is regulated under El controls of the Export Administration Regulations EAR 15 CFR 730 744 of the U S Commerce Department Bureau of Export Administration BXA A license is required to export the SOFTWARE outside the United States or Canada You agree that you will not directly or indirectly export or re export the SOFTWARE or portions thereof to any country other than Canada or to any person or entity subject to U S export restrictions without first obtaining a Commerce Department export license You warrant and represent that neither the BXA nor any other U S federal agency has suspended revoked or denied your export privileges 7 Note on Java Support 39 www chippc com 2222222 The SYSTEM SOFTWARE may contain support for programs written in Java Java technology is not fault tolerant and is not designed manufactured or intended for use or resale as on line control product in hazardous environments requiring fail safe performance such as in the operation of nuclear facilities aircraft navigation or communication systems air traffic control direct life support machines or weapons systems in which the failure of Java technology could lead directly to death personal injury or severe physical or environmental damage 8 Limited Warranty Limited Warranty MANUFACTURER warrants that the SOFTWARE will perform substantially in
4. H Sync Red Ground 14 V Sync s bie Ground 23 WWW chippc com 5 2 2 PS 2 Mouse connector a arean ENO Mouse Data 2 Ne 5 3 Ground CS e i 5 Mouse Clock e o Ne 5 2 3 PS 2 Keyboard Connector Pi Signal Minion Keyboard Data a INC 3 Gewd 4 We i B Keyboard Clock 8 m 5 2 4 DC Power Connector Center Shield Ground E Shield 5 2 5 LAN Connector Pin Signal UTP RJ 45 8 TX Be 7 4 isolated Ground B isolated Ground eRe 8 lsolated Ground m 24 www chippc com 5 2 6 Parallel Port Connector Optional Signal D Sub 25 A Lin as Ero ae int a8 Ground 19 Ground 20 Ground 21 Grou 22 Grou 23 Ground Busy 24 Ground 5 2 7 Serial Port Connector Optional Pin Sgna pSubs a Data Carrer Detect 2 Received Data 3 TenmitedDaa a Data Terminal Ready Ss Ground 6 Data SetReady 8 OeaToSen 8 ring indicator 5 2 8 Audio out Connector Optional LEN Audio Ground 2 Audio Out Right 3 Audio Out Left 25 WWW chippc com 5 2 9 Phone Line Connector Optional Pn Signa RI E vr 26 www chippc com 6 Smart Card Reader Writer Q card LED 6 1 1 General Xtreme PC can be ordered with a built in smart card reader writer The smart card option includes a slot and a LED When a readable and valid smart card i
5. accordance with the accompanying written materials for a period of ninety 90 days from the date of receipt Any implied warranties on the SOFTWARE are limited to ninety 90 days Some states jurisdictions do not allow limitations on duration of an implied warranty so the above limitation may not apply to you e Customer Remedies MANUFACTURER S and its suppliers entire liability and your exclusive remedy shall be at MANUFACTURER S option either a return of the price paid or b repair or replacement of the SOFTWARE that does not meet the above Limited Warranty and which is returned to MANUFACTURER with a copy of your receipt This Limited Warranty is void if failure of the SOFTWARE has resulted from accident abuse or misapplication Any replacement SOFTWARE will be warranted for the remainder of the original warranty period or thirty 30 days whichever is longer No Other Warranties EXCEPT AS EXPRESSLY PROVIDED IN THE LIMITED WARRANTY SECTION ABOVE THE SOFTWARE IS PROVIDED TO THE END USER AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTIES OF NON INFRINGEMENT MERCHANTABILITY AND OR FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK OF THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU 40 www chippc com No Liability for Consequential Damages MANUFACTURER OR MANUFACTURER S SUPPLIERS INCLUDING MS AND ITS SUPPLIERS SHALL NOT BE HELD TO ANY LIABILITY F
6. energy efficiency 9 1 Xtreme PC Requirements Compliance FCC Compliance The Xtreme PC meets Class B requirements IEC EN Compliance The Xtreme PC meets Class B requirements 9 2 FCC Statements 9 2 1 FCC Part 15 Class B This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This product generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that the interference will not occur in a particular installation If this product does cause harmful interference to radio or television reception which can be determined by turning the product OFF and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the product and receiver Connect the product into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced Radio TV technician for help 9 2 2 FCC Part 68 This equipment complies with Part 68 of the FCC rules On the bottom of this equipment is a label that contains among other information the FCC eq
7. and covers all hardware aspects of the product For information concerning software aspects please refer to the Xtreme PC Software User Manual 1 Safety Notices This section contains important safety notices Please read carefully as improper handling of the product may result in serious personal injury and or termination of warranty A Caution Never open the product s enclosure and never attempt to replace or fix any internal part Any attempt to repair the product install or replace components by an unauthorized person could expose that person to risk electrical shock and will cause the product warranty to be void A Caution To prevent possible electrical shock when installing the product do the following Make sure that the product power supply is disconnected before installing signal cables Any peripheral device the product might connect to must be connected to properly wired receptacles A Caution Never attempt to use a power supply other than the model supplied by the manufacturer and provided by Chip PC or an authorized service provider Connecting a different power supply may cause risk of electrical shock to the user or start a fire A Caution To completely remove electrical power from the product disconnect the wall mount power supply from the mains power socket Be aware that the ON STBY button does not disconnect electrical power from the product A Caution This product is desianed for indoor use only
8. in connection with Windows NT Server Terminal Server Edition you must possess 1 a Client Access License for Windows NT Server Terminal 3 www chippc com OA Server Edition and 2 an end user license for Windows NT Workstation or an end user license agreement for Windows NT Workstation for Windows based Terminal Devices please refer to the end user license agreement for Windows NT Server Terminal Server Edition for additional information MANUFACTURER may have included a Certificate of Authenticity for Windows NT Workstation for Windows based Terminal Devices with the SYSTEM In that case this EULA constitutes an end user license for the version of Windows NT Workstation for Windows based Terminal Devices indicated on such Certificate of Authenticity Back up Copy If MANUFACTURER has not included a back up copy of the SYSTEM SOFTWARE with the SYSTEM you may make a single back up copy of the SYSTEM SOFTWARE You may use the back up copy solely for archival purposes 2 Description of Other Rights and Limitations e Speech Handwriting Recognition If the SYSTEM SOFTWARE includes speech and or handwriting recognition component s you should understand that speech and handwriting recognition are inherently statistical processes that recognition errors are inherent in the processes that it is your responsibility to provide for handling such errors and to monitor the recognition processes and correct any errors Neither MANUF
9. thinprin m Infrared Port Optional Supports 9 6 kb s to 4 Mb s operation IrDA 1 1 Compliant Typical Link Distance gt 1 5 m Application Drivers support Cellular phone IrDA printers Notebook computers PDA Synch Safety IEC825 Class 1 Eye Safe Smart card Reader Writer Optional Supports Asynchronous protocols T 0 and T 1 in accordance with ISO 7816 Euro pay MasterCard and Visa EMV Supports synchronous cards Features Short circuit current limiting 6 KV ESD protection Protection against card take off during transaction Applications Employee access System administrator access Secured connections User Programmed FE CE a ss LISTED 1 Available only at specific models or as an option 2 Chip PC continually improves products as new technologies become available and therefore reserves the right to change specifications without prior notice 22 www chippc com 5 1 Xtreme PC EL Series Configurations The following table demonstrates the various configurations of the Xtreme PC EL family of products Options EL4100 EL4200 EL4400 EL4600 tora Disk On Chip Disk On Chip Disk On Chip Disk On Chip 3 8 MB 8 MB 16 MB 32 MB ea 10 100 BaseT 10 100 BaseT 10 100 BaseT 10 100 BaseT Audio out jack Serial 5 2 Connectors Pin Assignment 5 2 1 Display Connector Signal Signal TAS 15 5 NS 15 Li ER ET 3 Bue m Ground 5 Serres 13
10. ACTURER nor its suppliers shall be liable for any damages arising out of errors in the speech and handwriting recognition processes Limitations on Reverse Engineering Decompilation and Disassembly You may not reverse engineer decompile or disassemble the SYSTEM SOFTWARE except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation e Single SYSTEM The SYSTEM SOFTWARE is licensed with the SYSTEM as a single integrated product The SYSTEM SOFTWARE installed in Read Only Memory ROM of the SYSTEM may only be used as part of the SYSTEM e Single EULA The package for the SYSTEM SOFTWARE may contain multiple versions of this EULA such as multiple translations and or multiple media versions e g in the user documentation and in the software Even if you receive multiple versions of the EULA you are licensed to use only one 1 copy of the SYSTEM SOFTWARE e Rental You may not rent or lease the SOFTWARE e Software Transfer You may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the SYSTEM provided you retain no copies you transfer all of the SOFTWARE including all component parts the media any upgrades or backup copies this EULA and if applicable the Certificate s of Authenticity and the recipient agrees to the terms of this EULA If the SOFTWARE is an upgrade any transfer must include all prior versions of the SOF
11. C device A wall mount power supply A Plastic Base Attachment For attaching the device to any surface e g monitor A double sided adhesive pad Product Documentation User Manual Warranty Card etc 3 2 2 Unpacking the Xtreme PC To unpack your Xtreme PC open the box carefully remove the components and keep the packing materials in case you need to repack the device First open the box and remove the product documentation Hold the device and lift the platform on which the device is set Remove the device using a sliding motion directed forwards and upwards Beneath the platform you will find the wall mount power supply the Plastic Base Attachment and the double sided adhesive pad www chippc com 3 2 3 Identifying the Parts of the Xtreme PC Power Connector Spy Connector Network Link amp ActivityLEDs LAN Connector Speaker 10 100 BaseT RJ 45 Smart Card Status LED EON Optional Optional FRONT VIEW Smart Card Slot Optional Slots for sliding the product onto the Plastic Base Attachment Keyboard Mouse Parallel Port Connector Connector Connector DB25F PS 2 PS 2 Optional RIGHT SIDE VIE w Serial Port RS 232 Connector DB9M Optional Audio Out Infrared ON STBY Jack Port Button Optional Phone Line Connector RJ 11 Optional Lm UOT IR FL A N S LEFT SIDE VIEW Reset ON STBY Button LED Speaker 6 E N Bottom Vi
12. EL Series Hardware User Manual Rev A P N CDN ELEA H000 www chippc com Copyright Notice 2001 Chip PC Israel Ltd or its subsidiaries All rights reserved This manual and the software described herein in whole or in part may not be reproduced translated or reduced to any machine readable form without prior written approval CHIP PC SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING PERFORMANCE OR USE OF THIS MATERIAL The information and specifications in this document are subject to change without notice All correspondence regarding your Xtreme PC should include the product and purchase information For your convenience record the following in the space provided below Model Number e g EL 4410 Serial Number S N Purchase Date Place of Purchase Note Model Number and Serial Number appear on the label on the backside of the device U S GOVERNMENT RESTRICTED RIGHTS The Software and documentation are provided with RESTRICTED RIGHTS Use duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph c 1 11 of the Rights in Technical Data and Computer Software clause at DFARS 252 227 7013 or subparagraphs c 1 and 2 of the Commercial Computer Software Restricted Rights at 48 CFR 52 227 19 as applicable MANUFACTURER is Chip PC Inc Patents The p
13. L OR WRITTEN EXPRESSED OR IMPLIED THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE CHIP PC WARRANTY OBLIGATIONS AND BUYER S REMEDIES ARE EXCLUSIVELY STATED HEREIN CHIP PC LIABILITY WHETHER BASED ON CONTRACT TORT WARRANTY STRICT LIABILITY OR ANY OTHER THEORY SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS FOR THE CLAIM IN NO EVENT SHALL CHIP PC BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES CHIP PC SPECIFICALLY DOES NOT REPRESENT THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS WARRANTY OR MAKE A PRODUCT EXCHANGE WITHOUT RISK TO OR LOSS OF PROGRAMS OR DATA U S A State Laws oome states do not allow limitations on how long an implied warranty lasts or allow the exclusion or limitation of incidental or consequential damages so the above limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Limited Warranty Types Mail In Coverage The Customer will make the initial service request to the Chip PC Customer Service If Chip PC determines that a repair is required the Customer will receive instructions on returning the Product to Chip PC The customer will return the product in its original package or an equivalent The Customer will pay incoming freight charges and is responsible for any loss or damage to the Product while it is in transit Upon completion of the r
14. OR ANY DAMAGES SUFFERED OR INCURRED BY THE END USER INCLUDING BUT NOT LIMITED TO GENERAL SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAGES INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF BUSINESS INFORMATION AND THE LIKE ARISING FROM OR IN CONNECTION WITH THE DELIVERY USE OR PERFORMANCE OF THE SOFTWARE If you acquired this EULA in the United States this EULA is governed by the laws of the otate of Washington If you acquired this EULA in Canada this EULA is governed by the laws of the Province of Ontario Canada Each of the parties hereto irrevocably attorns to the jurisdiction of the courts of the Province of Ontario and further agrees to commence any litigation which may arise hereunder in the courts located in the Judicial District of York Province of Ontario If this EULA was acquired outside the United States then local law may apply Should you have any questions concerning this EULA please contact the MANUFACTURER of your SYSTEM U S GOVERNMENT RESTRICTED RIGHTS The SOFTWARE and documentation are provided with RESTRICTED RIGHTS Use duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph c 1 ii of the Rights in Technical Data and Computer Software clause at DFARS 252 227 7013 or subparagraphs c 1 and 2 of the Commercial Computer Software Restricted Rights at 48 CFR 52 227 19 as applicable MANUFACTURER is Microsoft Corporation One Micros
15. RINGEMENT AND FITNESS FOR ANY PARTICULAR PURPOSE CHIP PC DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE PRODUCT WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION WILL BE UNINTERRUPTED OR ERROR FREE 3 Limit of Liability UNDER NO CIRCUMSTANCES SHALL CHIPC PC BE LIABLE FOR LOSS OF DATA COST OF COVER OR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY THESE LIMITATIONS SHALL APPLY EVEN IF CHIP PC OR ITS RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND NOT WITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY PROVIDED HEREIN YOU AGREE THAT THESE ARE THE ONLY APPLICABLE TERMS OF 35 WWW chippc com AGREEMENT BETWEEN US COVERING SOFTWARE AND THAT THEY SUPERSEDE ANY OTHER COMMUNICATIONS ORAL OR WRITTEN BETWEEN US RELATING TO THE SOFTWARE 4 Export Restrictions You agree you will not export or transmit the SOFTWARE to any country to which export is restricted by applicable US law or regulation without the written approval of the appropriate US Government organization 5 U S Government Restricted Rights Applicable to the US Market Only The SOFTWARE is provided with RESTRICTED RIGHTS Use duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph c 1 ii of the Rights in Technological Data and computer software clause at DFARS 252 227 7013 or in subparagraphs c 1 and 2 of the Commercial Computer Softwar
16. SE WY50 WYSE Y60 Televideo TV1910 Televideo TV1920 ADDS As Hazeltine HZ1500 Tandem 6530 Hardware Options Infrared IR port ISO 7816 Smart card Reader Writer Internal 56k modem Game port adapter Biometric sensor www chippc com 21 www chippc com Internal 56k modem Optional Data Modem Compatibility ITU T V 90 K56flex V 34 V 32bis V 32 V 22 bis V 22 V 23 and V 21 Bell 212A and 103 V 42 LAPM and MNP 2 4 error correction V 42 bis and MNP 5 data compression V 250 ex V 25 ter and V 251 ex V 25 ter Annex A commands V 22 bis fast connect 2 commands Connector Standard phone line RJ 11 Jack World wide operation Complies to TBR21 and other country requirements Pre configured countries United States Japan United Kingdom France Germany owitzerland Australia Austria Belgium Brazil China Holland Denmark South Africa Sweden Malaysia Mexico Norway Greece India Ireland Israel Japan Spain Italy Poland Portugal Singapore Taiwan and Finland Regulatory Approval FCC Part 68 Canada CS 03 Issue 8 Disclaimer output speeds are less than the maximum possible E mi j fin z ft Powered 56k modems are capable of receiving data at speeds up to 56 kbps However due to FCC rules that restrict power maximum download speeds are limited to about 53 kbps Data transmitting limited to 33 6 kbps Actual speeds depend on many factors and are often www
17. TIONS This License Agreement is a legal agreement between you either an individual or a single entity and the manufacturer MANUFACTURER of the product which contains software and firmware product s installed on the product and or included in the package SOFTWARE By using the product on which software has been preinstalled installing copying or otherwise using the SOFTWARE you agree to be bound by the terms of this agreement 1 Grant of License Chip PC grants you a license to Use one copy of the SOFTWARE Use means storing loading installing executing or displaying the SOFTWARE You may use the SOFTWARE in or in conjunction with the Product as provided to you You may transfer ownership of the Product including the right to use the SOFTWARE to another party so long as that party agrees to accept these terms and conditions YOU MAY NOT USE COPY MODIFY TRANSLATE OR TRANSFER THE SOFTWARE OR MODIFICATION THEREOF IN WHOLE OR IN PART EXCEPT AS EXPRESSLY PROVIDED FOR IN THIS LICENSE YOU MAY NOT DECOMPILE REVERSE ENGINEER OR OTHERWISE DECODE OR ALTER THE SOFTWARE 2 Disclaimer of Warranty This SOFTWARE is provided AS IS and is delivered with no warranties either express or implied CHIP PC MAKES AND YOU RECEIVE NO WARRANTIES ON THE SOFTWARE EXPRESS IMPLIED OR STATUTORY OR IN ANY OTHER PROVISION OF THIS AGREEMENT OR COMMUNICATION WITH YOU AND CHIP PC DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY NON INF
18. TWARE e Termination Without prejudice to any other rights MANUFACTURER or MS may terminate this EULA if you fail to comply with the terms and conditions of this EULA In such event you must destroy all copies of the SOFTWARE and all of its component parts 38 WWW chippc com 3 Upgrades If the SYSTEM SOFTWARE and this EULA are provided separate from the SYSTEM by MANUFACTURER and the SYSTEM SOFTWARE is on a ROM chip CD ROM disk s or floppy disk s and labeled For ROM Upgrade Purposes Only ROM Upgrade you may install one copy of the ROM Upgrade onto the SYSTEM as a replacement copy for the SYSTEM SOFTWARE originally installed on the SYSTEM and use it in accordance with Section 1 of this EULA 4 Copyright All title and copyrights in and to the SOFTWARE including but not limited to any images photographs animations video audio music text and applets incorporated into the SOFTWARE the accompanying printed materials and any copies of the SOFTWARE are owned by MS or its suppliers including Microsoft Corporation You may not copy the printed materials accompanying the SOFTWARE All rights not specifically granted under this EULA are reserved by MS and its suppliers including Microsoft Corporation 5 Product Support Product support for the SOFTWARE is not provided by MS its parent corporation Microsoft Corporation or their affiliates or subsidiaries For product support please refer to MANUFACTURER s s
19. e Restricted Rights at 8 C F R 52 227 19 as applicable 6 Ownership The SOFTWARE is owned by Chip PC or its third party suppliers Your license confers no title or ownership in the Software and is not a sale of any rights in the SOFTWARE T Termination Chip PC may terminate your license upon notice for failure to comply with any of these License Terms Upon termination you must immediately destroy the SOFTWARE together with all copies adaptations and merged portions in any form 36 www chippc com 12 Microsoft EULA EULA for Microsoft Windows CE Operating System for Windows based Terminal Devices IMPORTANT READ CAREFULLY This End User License Agreement EULA is a legal agreement between you either a n individual or a single entity and the manufacturer NANUFACTURER of the special purpose computing device SYSTEM you acquired which includes certain Microsoft software product s installed on the SYSTEM and or included in the SYSTEM package SOFTWARE The SOFTWARE includes computer software the associated media any printed materials and any online or electronic documentation By installing copying or otherwise using the SOFTWARE you agree to be bound by the terms of this EULA If you do not agree to the terms of this EULA MANUFACTURER and Microsoft Licensing Inc MS are unwilling to license the SOFTWARE to you In such event you may not use or copy the SOFTWARE and you should promptly contact MANUFACTURER f
20. e that provides the user with a standard Windows interface while all applications are centrally run on a server s The Xtreme PC in the Windows based Terminal WBT mode of operation provides the following substantial benefits Centralized management High network and system security Standard yet flexible desktop user environments Minimum hardware breakdowns Easy maintenance and smooth upgrades The Xtreme PC is fully compatible with the following operating systems Windows 2000 Windows NT 4 Terminal Server Edition TSE All MetaFrame compatible Unix Operating Systems 2 2 Intended Audience This User Manual is primarily intended for IT staff and administrators though end users and others might find it helpful as well 2 3 Main Topics Overview This User Manual covers the following main topics Hardware setup including mounting options site preparation cable connections and the functionality of buttons and LEDs The use of Hardware Options smart card infrared port and internal 56K modem A Quick troubleshooting section of common problems which one may encounter during the hardware setup process see section 4 in this manual For troubleshooting one might also find the FAQ Frequently Asked Questions section at our web site helpful http www chippc com Our complementary Xtreme PC Software User Manual covers the following main topics Software setup and configuration of the device s s
21. ed to this product Operation with non certified peripherals is likely to result in interference to radio and TV reception 32 www chippc com 10 Limited Hardware Warranty Chip PC warrants that the Xtreme PC product you have purchased from Chip PC or from an authorized Chip PC reseller is free from defects in material and workmanship under normal use during the Limited Warranty period of 3 years The warranty period commences on the date of purchase Your sales receipt showing the date of purchase of the Xtreme PC is your proof of the date of purchase This warranty is not transferable to anyone who subsequently purchases the product from you This Limited Warranty does not include expandable parts Never open the product s enclosure and never attempt to replace or fix any internal part Any attempt to repair the product install or replace components by an unauthorized person could expose that person to risk electrical shock and will cause the product warranty to be void immediately Should the Xtreme PC products require service during the term of the Limited Warranty Chip PC would provide either mail in or carry in service Chip PC will repair or replace according to its own discretion the defective products or parts with new products or parts All exchanged parts and products replaced under this warranty will become the property of Chip PC TO OBTAIN SERVICE UNDER THIS LIMITED WARRANTY for mail in or carry in you must return the prod
22. epair Chip PC will return the Product to the Customer freight prepaid A copy of your Warranty Certificate must accompany the Product All non Chip PC Product accessories attachments modifications and all programs data and storage media must be removed from the Product before it is mailed in for service Chip PC shall not be responsible for items that are not removed Carry In Coverage The Customer will make the initial service request to the Chip PC Customer Service depending on the product covered If Chip PC determines that a repair is required the Customer must deliver the Product to a Chip PC Authorized Service Provider make arrangements and pay for the transport of Product to Customer after its repair A copy of the Customer s Warranty Certificate must accompany the Product All non Chip PC Product accessories attachments modifications and all programs data and storage media must be removed from the Product prior to taking Product to the Chip PC Authorized Service Provider Chip PC or Chip PC Authorized Service Provider shall not be responsible for items that are not removed or that are damaged before they are received by Chip PC or the Service Provider 34 www chippc com 11 Chip PC Software License Agreement IMPORTANT READ CAREFULLY BEFORE USING THIS PRODUCT WHICH CONTAINS CHIP PC SOFTWARE AND MAY CONTAIN OTHER CHIP PC INTELLECTUAL PROPERTY USING THIS PRODUCT INDICATES YOUR ACCEPTANCE OF THE FOLLOWING TERMS AND CONDI
23. er you have connected all peripherals and cables follow these steps to turn your Xtreme PC ON 1 Turn ON all peripherals connected to the system such as monitor amp printer 2 Press on the ON STBY Button The green ON STBY LED will blink as long as the system boots up Note If your system is configured to use a smart card to power on then insert the smart card into the slot in front of the system The smart card should be inserted correctly the circuit chip should be facing up and in front for the system to power up properly After inserting the smart card the system will boot up and the logon screen will be displayed See section 6 1 2 Using the Smart card 3 Once the system is up the ON STBY LED eo will be steady green The system loading screen will appear followed by one of the following The Connection Manager in case the Xtreme PC was automatically configured through DHCP server or has been configured in the past The Setup Wizard in case the Xtreme PC has never been configured and cannot receive all needed parameters through DHCP server or remote administration 14 www chippc com 3 5 2 Switching the System to STBY Mode When Xtreme PC is in Standby Mode it consumes less power however its network connection remains active and one can switch back to ON mode within a few seconds Once the System is ON follow these steps to switch the Xtreme PC to a Standby Mode T Log off from any open connection
24. ettings such as network definitions display keyboard and mouse properties and more Managing the Xtreme PC connections to server s through using the connection Manager and the ICA and RDP protocols 2 4 More Information Questions about the Xtreme PC should be directed to an authorized Chip PC service provider or the Technical Support Department of the distributor from which you purchased your Xtreme PC Please have all pertinent information available when requesting help 6 www chippc com OO including any error messages that may have appeared either on the Xtreme PC or on the server In case your distributor service provider fails to provide adequate support please turn directly to Chip PC s technical support through one of the following channels Address Motzkin 20 P O B 4 Tirat Carmel 39100 Israel Web site http www chippc com E mail support chippc com www chippc com 3 Hardware Setup 3 1 Site Preparation Before installing the Xtreme PC make sure that The site wiring is appropriate The site is away from devices that generate electrical noise electromagnetic interference heat vibration and such The environmental requirements of the Xtreme PC as defined in the product specifications are met see section 5 Hardware Specifications EL Family 3 2 Unpacking the Xtreme PC 3 2 1 Package Contents The Xtreme PC is typically shipped in a box containing the following items An Xtreme P
25. ew WWW chippc com 3 3 Mounting the Xtreme PC 3 3 1 Mounting Options The Xtreme PC can be positioned as a tabletop device or it can be mounted on the monitor or any other surface as described in the following pictures Note in case the Xtreme PC includes a smart card option make sure you have a comfortable access to the smart card slot on the front side of the product Tabletop Device Position Horizontal Mounting Position Vertical Mounting Position 10 WWW chippc com 3 3 2 Mounting Directions The Xtreme PC mounting process is described in the following pictures 1 2 3 4 5 6 T The Xtreme PC is shipped with a Plastic Base Attachment and a double sided adhesive pad If you wish to use the Plastic Base Attachment place it with the front side facing up as shown in the picture Now use the slots at the bottom part of the Xtreme PC to slide it onto the Plastic Base Attachment using a sliding motion starting with the products back end and moving forward Attach one side of the adhesive pad to the backside of the Plastic Base Attachment Attach the other side of the adhesive pad to the surface to which you wish to attach the Xtreme PC Make sure that the surface is clean and dry Once the Plastic Base Attachment with the Xtreme PC is firmly secured to the surface the product is ready for work In case you need to take the product in out 11 Plastic Base
26. he network cable you are using is a standard one and that it is properly connected to the device and to a network jack 2 Connect the power adapter DC cord into the 5V socket Q A Caution When connecting the power adapter DC cord make sure that the wall mount power supply is disconnected from the mains power socket to avoid the risk of electrical shock 3 Connect the monitor video cable to the CRT DB 15HD connector 4 Connect the monitor power cable to a power source and turn the monitor ON 5 Connect the wall mount power supply to the mains power socket Once the Xtreme PC receives power the ON STBY LED will be lit in steady red Note The ON STBY LED will change to steady green after pressing the ON STBY button once the system finished booting up In case a self test procedure has failed the ON STBY LED will remain steady red 13 WWW chippc com 3 4 3 Connectors on the Xtreme PC Left Side see image below 1 Connect earphones external speakers to the Audio Out jack see image below Q 2 Optional in case your Xtreme PC includes a built in modem connect one end of a telephone cable into the Modem RJ 11 port on the Xtreme PC Plug the telephone cable s other end into a telephone jack for more detail see section 7 Internal 56K Modem 3 5 Switching between the Xtreme PC ON STBY Modes o 0 RESET ON STBY ON STBY Audio Out Modem Port Push Push LED Jack RJ 11 Button Button 3 5 1 Turning the System ON Aft
27. lume mute control Status Lights LEDs ON STBY light Green Red LAN Connector LEDS Green Orange Smart card status Green Red Network 10 100 BaseT Auto sense Fast Ethernet RJ 45 connector TCP IP with DNS and DHCP Point to Point Protocol PPP SNMP support allows remote configuration of device settings reporting of device configuration and attached devices Operating System Microsoft Windows CE 3 0 kernel 20 Protocols Supported Microsoft RDP 5 Citrix ICA 6 SNMP Ill Chip PC Web Management Power Device input 5V DC 1 5A max Normal power consumption 3 5W Power consumption standby mode 3W Wall mount power supply input 100 240VAC 50 60 Hz input included Physical Characteristics Dimensions 80 W x158 D x34 H mm 3 15 W x 6 22 D x 1 34 H Weight 180 gr 6 oz Shipping weight 0 25 Kg 0 55 lbs with power supply Environmental Temperature range Operating 32 F 104 F 09C 409C Storage 32 F 140 F 0 C 60 C Humidity Operating 20 80 non condensing Storage 10 90 non condensing Altitude 0 20 000 ft Regulatory Compliance Safety UL 1950 cUL EN60 950 EMI EMC FCC Class B CE Mark EN55022B VCCI EPA ENERGY STAR Terminal Emulations Supported Optional DECVT52 DEC VT100 DEC VT300 7 bit DEC VT300 8 bit ANSI BBS SCO Console HP70092 IBM3270 3278 Models 3 4 5 6 2 E 3 E 4 E 5 E 3279 Models 2 3 4 5 3287 Model 1 IBM3151 IBM5250 WYSE WY50 WY
28. m 7 Internal 56K Modem 7 1 1 General Xtreme PC products can be ordered with pre installed internal 56k dial up modem This modem can be used as a primary communications means to the application server RAS ISP or as a fallback media A Caution If you have a modem option built into your Xtreme PC it may not work with multiple phone lines or a private branch exchange PBX cannot be connected to a coin operated telephone and does not work with party lines Some of these connections may result in excess electrical voltage and could cause a malfunction in the internal modem Check your telephone line type prior to connecting your phone line 7 1 2 To Connect a Telephone Line 1 Plug one end of the telephone cable into the Xtreme PC Modem port Be sure the cable clicks into place A Caution Be careful not to plug the cable into the LAN jack RJ 45 which has a similar appearance to the modem port phone line jack RJ 11 2 Plug the other end of the phone cable into a telephone jack If the supplied phone cable does not fit your telephone jack you may need to use an appropriate adapter 28 www chippc com 8 Infrared Port Infrared Port Ue 8 1 1 General Xtreme PC products can be ordered with pre installed infrared port This port can be used with appropriate software support for Synchronizing data and communicating with a PDA a cellular phone a laptop and the like Printing with Infrared printers
29. n Flow Chart oocccocccccconcccnconiccncccncoccnnncanonanons 17 QUICK TROUBLESHOOTING cosas cia 18 5 EL SPECIFICATIONS coococcocconconconconcononconnonrancnncnncnnncancancaronrnnrnnrnnranonrnnrnnrnaranos 20 5 1 Xtreme PC EL Series ConfiguratiONS ccoccccccconcococonococononnnnononnnonnnnononnnnanonanennncnnons 23 5 2 Connectors Pin Assignment coocccncccncncococcncconononcncncocononononnonononanonnnnanonnnonnnnaninanenannnnes 23 6 SMART CARD READER WRITER ener nennen nennen nnn nnn 27 T INTERNAL 56K MODEWM 1 eere nnne nnnm nennen nnn nnn 28 8 INFRARED PORT cT TE 29 9 REGULATORY COMPLIANCE eere nnne nnn 31 9 1 Xtreme PC Requirements Compliance occocccoccoccoccocnocconconionnnnocancnronnnonncancononcnnnos 31 e FS lalo Meninas rateros 31 I9 TECEN eue mm 32 9 MOOMICAMON Sed 32 q Canle e ene 32 9 6 Peripheral Devices irradia 32 10 LIMITED HARDWARE WARRANTY 0 csccscceesecesceeeseeeeceseeeeseeeeseneeeseneees 33 11 CHIP PC SOFTWARE LICENSE AGREEMENT ern 35 12 MICROSOFT EULA 1eeeeeeeeenenen nnn nnn nnn nh nana innen usa anna an 37 Welcome Congratulations on your purchase of the Xtreme PC The Xtreme PC combines flexible features in a small footprint and will provide the perfect computing solution suitable for you This User Manual contains the information you will need to set up the hardware of your Xtreme PC
30. oft Way Redmond WA 98052 6399 41
31. or Check whether the monitor is ON its LED should be steady green when ON fthe monitor is ON check the monitor brightness level Make sure that the display connector is properly plugged in Make sure that the mouse is properly plugged into the green PS 2 mouse port on the Xtreme PC side Check that the mouse and the keyboard connections were not switched such that the mouse in connected to the keyboard port Disconnect the DC power cable from the 5V socket Press the ON STBY button and hold it pressed for 5 seconds while reconnecting the DC power cable to the 5V socket Note The actions above will cause the Xtreme PC to return to its factory default settings with a low screen refresh rate that is probably supported by your monitor 18 www chippc com Problem During the Xtreme PC Power On Self Test an error message appears cannot print to the Local Printer connected to my Xtreme PC cannot make a network connection using the Connection Manager Solution Read the message and act according to its instructions For example if the message indicates a problem in the keyboard connection make sure that the keyboard is properly connected to the purple PS 2 keyboard port on the Xtreme PC side Make sure that the printer power cord is plugged into the proper outlet and is turned ON Check the cable connection from the printer to the Xtreme PC parallel serial port Make su
32. or instructions on return of the unused product s for a refund Software License The SOFTWARE is protected by copyright laws and international copyright treaties as well as other intellectual property laws and treaties The SOFTWARE is licensed not sold 1 Grant of License SOFTWARE includes software already installed on the SYSTEM SYSTEM SOFTWARE and if included in the SYSTEM package software contained on the CD ROM disk and or floppy disk s labeled Desktop Software for Microsoft Windows CE DESKTOP SOFTWARE This EULA grants you the following rights to the SOFTWARE e SYSTEM SOFTWARE You may use the SYSTEM SOFTWARE only as installed in the SYSTEM e DESKTOP SOFTWARE DESKTOP SOFTWARE might not be included with your SYSTEM lf DESKTOP SOFTWARE is included with your SYSTEM you may install and use the component s of the DESKTOP SOFTWARE in accordance with the terms of the end user license agreement provided with such component s In the absence of a separate end user license agreement for particular component s of the DESKTOP SOFTWARE you may install and use only one 1 copy of such component s on a single computer with which you use the SYSTEM Use of Windows CE Operating System for Windows based Terminal Devices with Microsoft Windows NT Server Terminal Server Edition If the SOFTWARE is Windows CE operating system for Windows based Terminal devices the following special provisions apply In order to use the SYSTEM
33. re that the printer is on line Make sure that the printer is properly configured in the application server s Print Manager and that the printer has not been Paused Check that the printer is properly loaded with paper Make sure you are using a standard LAN cable as the use of non standard LAN cables may result in a loose contact or network connection failure Make sure that the network cable is properly connected to the network connector on the back panel of the Xtreme PC Make sure that the other end of the cable is connected to a properly working network outlet Check with your network system administrator to ensure that the Xtreme PC is set up properly 19 www chippc com 5 EL Specifications CPU 167 MIPS Super H RISC processor Memory 16 64 MB SDRAM onboard Mass Storage M Systems 8 32MB Disk On Chip Display Color VGA SVGA XGA DB 15HD female connector Resolution up to 1024 x 768 Colors up to 16M Refresh rate up to 85 Hz 128 bit 2D graphics acceleration engine with 2MB display memory SDRAM Supports CRT and analog LCD monitor Input Output 2 Mini DIN PS 2 connectors for mouse and keyboard 1 Serial RS 232 Game port with DB 9 male connector 1 Bi directional ECP EPP 1 7 and 1 9 IEEE 1284 Parallel Port with DB 25 female connector supports local and network printer Infrared 4Mbps transceiver Audio Support Internal 1W amplifier and speaker 3 5 mm Stereo Audio Out jack Software vo
34. roduct s described herein are in a status of Patent s pending Trademarks Xtreme PC Chip PC and the Chip PC logo are either trademarks or registered trademarks of Chip PC ICA is a registered trademark and MetaFrame is a trademark of Citrix Systems Inc Microsoft Windows Windows CE Windows NT and Windows Terminal Server are registered trademarks of Microsoft Corporation Product names mentioned herein may be trademarks and or registered trademarks of their respective companies The Energy Star emblem does not represent endorsement of any product or service www chippc com Contents 1 SAFETY NOCES cusco ia 4 ti s Alo con edem 5 2 INTRODUC HON c 6 NEP uad ERI dA Emm 6 2 2 Intended Audience ococccoccccccocccocconconconconcnnconnnnonnnonnnnnnnnnnnnnnnnnnnnnnrnnrnnnnrnnnnnnannnnnnnnnnnnnnns 6 2 9 Nal TOPICS OVOLVIO Wins datsun MESI ans 6 24A ec aie antc illo a NTC NR 6 3 HARDWARE SETUP oononcocconconconcoconccononconconconcancnncanonancannaroncnnrancancnronrnnrnnrnnranonas 8 I S d Ve Dal ll Ol eara E e o o E E E E 8 222 Unpacking the tene c MM I 8 9 9 Mounting Ne Xireme PO eminente nicas 10 34 Connecting the 87 10 NETT 12 3 5 Switching between the Xtreme PC ON STBY Modes eese 14 3 6 Overview of a Connected Xtreme PC ooccocccocccoccocnoccconioconicoonooncononcnonncononnonnnnnnnanennonons 16 3 7 Summary Connection Disconnectio
35. rovides simple answers and solutions If you still encounter problems which you cannot resolve please turn to your authorized service provider or distributor for assistance Problem After connected the product s wall mount power supply to the mains socket the ON STBY LED is not lit at all When I press the ON STBY button the ON STBY LED remains steady red When I press the ON STBY button the ON STBY LED turns green but the monitor remains blank When turn the Xtreme PC ON the Connection Manager or Setup Wizard appear but the mouse is not working When turn the Xtreme PC ON the ON STBY LED turns green the monitor is ON but cannot the introductory screen only a clutter of colorful lines Note This problem might appear when the monitor does not support the Xtreme PC s screen refresh rate Solution Ensure that the DC cord is properly plugged into the 5V socket at the backside of the Xtreme PC Ensure that the wall mount power supply is properly plugged into a mains power socket Ensure that the Xtreme PC is plugged into a mains power socket that works properly Ifthe Xtreme PC needs a smart card to power on make sure that the smart card is inserted properly the smart card LED is lit in steady green after the card is inserted n case you checked the above and everything is OK your product might have a malfunction and you should turn to your authorized service provider distribut
36. s Press the ON STBY Button Q to switch the system to a STBY mode The ON STBY LED will turn from steady green to steady red and the monitor will be turned OFF Turn OFF the peripherals other than the monitor which was already turned OFF e g printer Note Pressing the ON STBY Button o successively will switch between the ON and STBY modes of the Xtreme PC 3 5 3 Unplugging the System If you are not going to use the system for a long period of time you should do the following 1 2 Log off from any open connection s Press the ON STBY Button to switch the system to a standby mode The ON STBY Leo will turn from steady green to steady red and the monitor will be turned OFF Unplug the system from the mains socket to avoid potential damage caused by voltage transients 15 www chippc com 3 5 4 Connecting to Peripherals when the System is ON STB Y In case you wish to connect your Xtreme PC to a peripheral device e g printer scanner etc through the Serial Parallel port and the product is in ON STBY you should do the following 1 First log off all open connections 2 Then disconnect the DC power cable from the 5V socket Note Installing peripherals without unplugging the Xtreme PC device may result in serious damage both to the device and the peripheral Unplugging the device ensures that there is no standby current on the system board Not doing so may damage your device 3 Now connect
37. s inserted into the slot the LED o is lit in steady green The smart card can be used for various applications The smart card technology enables the loading of a personalized desktop The smart card technology allows an extra level of system security by requiring both insertion of a secured memory smart card and a password The smart card technology enables web sales through local credit card transactions The smart card technology enables Application Service Providers to charge for software applications usage through monitoring the time and applications being used The smart card technology can be used to read write data to applications run on the server 6 1 2 Using the Smart Card 1 Powering the system ON with a smart card when the device is programmed to be activated with a smart card and used for security log on purposes Insert the smart card into the slot in front of the system The smart card should be inserted correctly the circuit chip should be facing up and in front for the system to power up properly After inserting the smart card the system will boot up and the logon screen will be displayed The smart card LED will be steady green as long as the smart card is inserted In case the smart card is damaged or not inserted properly the smart card LED will be lit in steady Red 2 Removing the smart card will cause the system to reboot as done when pressing the Reset Button 2f www chippc co
38. the peripheral device and turn it ON 4 Reconnect the DC power cable into the 5V socket and turn your Xtreme PC ON 3 5 5 RESET Button Pressing the RESET Button will cause the Xtreme PC to reboot execute self test procedures and return to its last configuration Note The RESET Button Q performs reset only to the Xtreme PC device and not to the server therefore if there is some problem at the server level Reset will not solve the problem 3 6 Overview of a Connected Xtreme PC The following picture demonstrates an Xtreme PC with cables connected to it e Printer y w Connection E s TOR Parallel Port v IR Serial Port Pp Connection ERN not in use in this example UR x A 4 Power Connection E S Keyboard Connection Mouse Connection Network Connectio Monitor Connection 16 www chippc com 3 7 Summary Connection Disconnection Flow Chart To Connect To Disconnect First position the Xtreme PC First turn everything OFF Attach all cables to the Xtreme PC Disconnect the wall mount power supply from the mains power socket y y Plug the wall mount power supply to a Remove all cables from the Xtreme PC mains power socket y y Turn the Xtreme PC ON You may now take the Xtreme PC with you 17 www chippc com 4 Quick Troubleshooting The following section describes common difficulties that may arise during the setup or use of your Xtreme PC and p
39. the trouble is causing harm to the telephone network the telephone company may request that you remove the equipment from the network until the problem is resolved Repair of this equipment should be made only be Chip PC or a Chip PC authorized service provider This equipment cannot be used on public coin service provided by the telephone company Connection to Party Line Service is subject to state and possible provincial tariffs Contact the state or provincial utility service commission public service commission or corporation commission for information 9 3 IEC EN Notice This product conforms to requirements of EN60950 This product conforms to requirements of EN55022 for Class B product 9 4 Modifications The Xtreme PC is especially designed for many years of continuous operation No maintenance or upgrade is possible for this product except for normal software configuration and loading that do not require to open the product s external enclosure Never open the product s enclosure and never attempt to replace any internal part Doing so might damage the product and will terminate the product warranty immediately 9 5 Cables Connections to this device must be made with shielded cables with metallic RFI EMI connector hoods in order to maintain compliance with FCC Rules and Regulations 9 6 Peripheral Devices Only peripherals input output devices printers etc certified to comply with the Class B limits might be attach
40. uct freight prepaid and insured or assume the risk of loss or damage during shipment in the original container or an equivalent to a Chip PC Service Center If the unit was not registered you should enclose a written receipt for the product showing the date of purchase distributor s or dealer s name from whom you purchased the product and both the model and serial number of the product Chip PC will pay the return ground shipping charge within the continental United States Limitations of Remedy THIS LIMITED WARRANTY COVERS repair or replacement at the discretion of Chip PC of the Xtreme PC device power supply mouse or Keyboard if purchased from Chip PC THIS LIMITED WARRANTY DOES NOT COVER losses or damages that occurred as a result of shipping improper installation or maintenance by anyone other than an authorized representative of Chip PC acts of God or accident misuse neglect or misapplication of the product installation of options or parts by anyone other than Chip PC exposure to extremes of temperature or humidity or improper electrical power Products returned to Chip PC for service in warranty and post warranty that are diagnosed as No Fault Found will be subject to a diagnostic fee 33 www chippc com The Limited Warranty will be void in case of mechanical damage to the product or in case that the warranty seal is broken THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES REMEDIES OR CONDITIONS WHETHER ORA
41. uivalence number REN for this equipment If requested this information must be provided to the telephone company This modem uses the RJ 11 telephone jack The REN is used to determine the quantity of devices which may be connected to the telephone line Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call In most but not all areas the sum of the RENs should not exceed five 5 0 To be certain of the number of devices that may be connected to the line as determined by the total RENs contact the telephone company to determine the maximum REN for the calling area If the terminal equipment causes harm to the telephone network the telephone company will notify you in advance that temporary discontinuance of service may be required But if advance notice is not practical the telephone company will notify the customer as soon as 31 www chippc com OS possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary The telephone company may make changes in its facilities equipment operations or procedures that could affect the operations of the equipment If this happens the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service If trouble is experienced with this equipment please contact Chip PC for repair and or warranty information If
42. upport number provided in the documentation for the SYSTEM Should you have any questions concerning this EULA or if you desire to contact MANUFACTURER for any other reason please refer to the address provided in the documentation for the SYSTEM 6 Export Restrictions You agree that you will not export or re export the SOFTWARE to any country person or entity subject to U S export restrictions You specifically agree not to export or re export the SOFTWARE i to any country to which the U S has embargoed or restricted the export of goods or services which as of March 1998 include but are not necessarily limited to Cuba Iran Iraq Libya North Korea Sudan and Syria or to any national of any such country wherever located who intends to transmit or transport the products back to such country ii to any person or entity who you know or have reason to know will utilize the SOFTWARE or portion thereof in the design development or production of nuclear chemical or biological weapons or iii to any person or entity who has been prohibited from participating in U S export transactions by any federal agency of the U S government If the SOFTWARE is labeled North America Only Version above on the Product Identification Card or on the SOFTWARE packaging or other written materials then the following applies The SOFTWARE is intended for distribution only in the United States its territories and possessions including Puerto Rico
43. www chippc com 1 1 Safety Instructions Please read the following safety instructions carefully before using the product E m Before cleaning disconnect the product from DC power Be sure not to expose the product to excessive humidity Be sure to install the product on a secure surface Place the DC power cord in such a way to avoid people stepping on it If the product is not used for a long period of time remove the product wall mount power supply from the mains socket If one of the following situations occurs be sure to get the product checked by a qualified service technician a The product s power supply is overheated damaged broken causes smoke or shortens the mains power socket b Liquid penetrates the product case c The product is exposed to excessive moisture d The product does not work well or you cannot get it to work according to the user s manual e The product has been dropped or mechanically damaged f The product has obvious signs of breakage or internal loose parts The product should be stored and used only in temperature and humidity controlled environments as defined in the product environmental specifications The wall mount power supply used with this product should be the model supplied by the manufacturer or an approved equivalent provided by Chip PC or an authorized service provider www chippc com 2 Introduction 2 1 Xtreme PC What is it The Xtreme PC is a desktop devic
Download Pdf Manuals
Related Search