User Manual pallettrailer 750kg braked 1
Contents
1. 3 White Massa 4 Green Direction right 5 Brown Light right 6 Red Braking lights 7 Black Light left 8 Grey Reversing light 9 Brown Blue 10 Brown Red 11 White Red 12 13 White Blac S 155 70R 12C 6 5 94 900 EUROL Hykrol ISO VG 22 68 24 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning Annex 2 Indications on the pallet trailer Type Constructionplate The pallet trailer fulfills the requirements of the Road Traffic Act 1994 and the National Road Traffic so type assembly plate should be applied This type construction plate contains the following information Omschrijving Gegevens aanhangwagen Description Information trailer Gegevens fabrikant Manufacturer Type Type Identificatienummer VIN nummer Bouwjaar Built year Maximaal totaalgewicht Maximum weight Gewicht as 1 Weight axle 1 Gewicht as 2 Weight axle 2 Gewicht as 3 Weight axle 3 Maximale koppeldruk Maximum weight coupling The Constructionplate is located on the drawbar on the right front leg The VIN number is located on the upper side of the right leg and drawbar consists of 17 characters 25 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning Annex 3 Warnings displayed on the trailer Pictogram Position Amount e Rails for liftingrack 4 left an2. as possible above the axis are e Load heavy objects as far as possible above the axle Lighter objects distribute evenly Distribute the load as evenly as possible over the left and right halves of the pallet trailer Point tax avoidance The load must always be properly secured Each country has its own regulations consult the applicable country regulations e Loading and unloading the pallet trailer must always be disconnected from the towing vehicle NOTE When raising or lowering the pallet trailer must be on the brake 17 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning Maximum load supportingwheel The static maximum load of the folding support wheel is 250kg The maximum load must not be exceeded Securing cargo A load must always surely anchored with suitable tools for this purpose for the cargo to the vehicle For securing the load you must use the standard provided tie rail Note The pallet trailer is designed calculated and tested for the loads as specified in the documents accompanying the pallet trailer and type construction plate which is mounted on the front of the pallet trailer Overloading can result in permanent damage for which we can not accept responsibility as the manufacturer Use for lashing only proper lashings or this purpose which comply with EN 12195 2 The maximum load of the tie rail mounted in the side edge 500 kilograms Noseweight The maximum permissib
3. is load on the pallettrailer standing it should be firmly put on the trailer under the rules of the highway code The user has to be aware of this and has these rules to follow Use can be made of the tie rails located on the left hand and right hand side of the pallettrailer e Check noseweight by looking at even distribution of the load e Connect the pallettrailer according to requirement 3 8 1 e Rotate the support wheel up and fix it The support wheel must always be parallel to the direction of travel support wheel should not obstruct brake rod e Check the coupling The coupling housing must be around the ball and completely secured Note the correct position gt gt lt lt see 3 8 1 e Attach the breakaway brake cable to the towing vehicle e Insert the lighting plug into the socket of the towing vehicle e Check the lights The lights should never be shielded obstructed by the load e Before starting remove any wheel lock and at a braked pallettrailer please be careful that the parking brake is not actuated e Ensure that all locking pins are locked and secure 19 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 4 Periodic maintenance The pallet trailer is in many ways to wear and should be checked as previously described for each use 3 7 For the parts a periodic monitoring should also take place Run the maintenance according to the schedule below Freq
4. 15 eU B E 16 3 8 4 The load of ENEE EE 17 3 8 4 Before driving off Driving ee e 19 4 Periodic maintenance tee EEN 20 RE 20 4 2 Coupling ER Ee 20 KC Bls LTE 21 ele Ee 21 PBC HSE SIS ve ieee A rs a Se een Sse ca had a A asl e ce ca lst a 22 BES ISAM EE 22 eel TATI e 22 5 1 Repair e Ee an le 22 4 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 0 t EE 22 5 1 2 Repairs Replacement of paria sese see edd 23 TES EEEE E E E E E HL 24 Annex 1 Additional technical information associated with manual 24 Annex 2 Indications on the pallet trailer eee eee 25 Annex 3 Warnings displayed on the trailer sees sees seene 26 5 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning Introduction This user documentation describes how to work with and periodic maintenance of the pallet 750kg braked trailer Operations to be carried out by personnel of manufacturers are not included in this documentation Note This documentation is part of the pallet trailer Keep this documentation carefully It contains information which also comes in handy later or necessary for example for repair and maintenance It is recommended to keep a copy at the pallettrailer and in the archives of your technical department Manufacturer can possibly make you an extra copy Upon transfer of the pallettrailer the documentation should be supplied In addition to provisio
5. CE User Manual Concerns pallettrailer 750kg braked Associated with Brand MCD Type SW7 5EG Year built 2013 This documentation has been translated from the Dutch version 01 2014 Translation errors are reserved no rights can be derived 2 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning Table of contents Tame o ee EE Tei sse Trae IB EEN tad Bahl ech ina A Rares Sia ch a as a de aa Ns ea a et tat aa A Ra ca htt Warranty and RE EE E EE BETEN ENER UE La EE D G Hl EE EE E SR Intermiaibrak EE Ld ele ei E gnac r RSS SETT RTA TT v 2 General a elase lT 221 MENACE USE machine TTT 2 2 Not permitted US6 sss EE EE Ee Eesen Pane ana dean taco Recall R DEN MMPOG HOM TTT 32 oafetyr leS eeh Eege tege E eege EEGEN ee ee Ee ee E Se Us Tse a L TT 3 5 Warnings affixed to the TEE 3 6 Substances dangerous to humans and environment sees eee ee eee eee eee ee 3 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 3 6 1 GTGT oc E E scctes encase ege ee edo oe ede 11 Ee Le GE 11 3 6 3 Protection of the environment sese ee ee ee ces eee eee 12 3 6 4 ele e TI 12 3 7 Check betore USE ugeet 12 EI ee E 12 3 7 S Be lase E 13 3 7 4 SMOCK reductio RE 13 3 7 9 Hydra licsinstallatioh EE 13 SE EE ESA 13 3 8 USG TCU e e EE 14 38 1 Gonnectand Ee Tee le i ee eet ee 14 3 8 2 Opern loading area azvi Pad ag E ETLE aT SREE
6. brake e Parking brake should be checked for proper operation 12 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 3 7 3 Lighting Lighting needs to work properly this implies that the following elements are operated using the pallettrailer Indication Color Amount Left Right Side Frontlight White 2 Left and right Frontside Standard lightning Red 2 Left and right Backside Licenseplate lights White 2 Left and right Backside Brake lights Red 2 Left and right Backside e Reversing lights White 1 Left and right Backside Fog lights Red 1 Right Backside Direction lights Orange Amber 2 Left and right Backside e Hazard lights Orange Amber 2 Left and right Backside Reflectors Orange Amber 4 Left and right 2 each side on the right and left These lights has to work in the same time The direction Lights has to work on the left and right side 3 7 4 Shock reduction Pallettrailer needs to be provided with an undamaged spring and shock absorber Both on the left and on the right hand side 3 7 5 Hydraulics installation e Hydraulic system must be intact and be in good condition e Oil level should be checked and refilled if necessary e Hydraulic Installation may only be operated with the supplied lifting handle 3 7 6 Chassis e Chassis and supporting parts must be undamaged and in good condition Warning Not following the instruction
7. d right Crushing hazard vertical sections 50x50mm e Right drawbar 1 C Neem voor gebruik kennis van de gebruiksdocumentatie Maximum trailer load CE marking 150x50mm Read instructions before use e Mudguard left and 2 right 40x20mm Tire pressure e Cross connection of 1 H H rails for liftingrack Laadruimte niet betreden 9 Don t enter the loading area 200x50mm GER De www pallettrailer com e Right drawbar 1 lil Read user manual before use Safety wie Safety om Safety dum Instructions in english Wear safety glasses Wear safety gloves Wear safety shoes Read user manual before use 200x50mm Warning All fitted to the vehicle warning and nameplates must always be legible Any damaged or not readable plates has to be substituted 26 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning
8. equipped with safety shoes and work gloves 3 3 Users The pallettrailer can be operated by any adult person who s aware of and following the safety and operating instructions described this documentation Special training is not required For driving the pallettrailer is obviously a relevant driving license required 3 3 1 Servicepersonel A special knowledge experience and or training is required Fore moving part knowledge and experience in the field of maintenance of motor vehicles is recuired The hydraulic part knowledge and experience in the field of maintenance of hydraulic systems is required 3 4 Workingspace In order to operate the pallet trailer 150 cm should be free around the pallettrailer 3 5 Warnings affixed to the trailer The warnings affixed to the pallet trailer shall be clearly legible If necessary renew the warnings The text of the warnings made are set out in Annex 3 The relevant risks are also detailed in the same Annex 3 6 Substances dangerous to humans and environment 3 6 1 General The following substances involved in the operation of the pallettrailer require special attention e Hydraulic oil e Tire 3 6 2 Storage Save hazardous substances always in a place that is not accessible to unauthorized persons There may be applicable for the storage of substances legal requirements Refer to the relevant authority for the regulations and required permits 11 Version date 01 2014 translatio
9. hecked for deformation cracks and corrosion every use and maintenance If there is deformation or cracks are present then don t use the pallet trailer in any case If there is corrosion this has to be removed and the zinc layer has to be restored by the use of zinc compound 4 6 Clean The pallet trailer can be hosed down with water We certainly do recommend this after the trailer was in contact with salt brine or acids The substance can permanently damage the zinc layer To stains on galvanized parts as good as possible you can ensure adequate air circulation during storage so that no water film may arise between the metal surfaces Always make sure that the electrical components do not come into contact with water or other liquids Warning Salt brine of acids may cause damage to the zinc coating causing corrosion Clean the pallet trailer properly if salt brine or acids are present on the pallet trailer 5 Other maintenance The operations described in this chapter may only be carried out by service personnel 5 1 Repair en maintenance 5 1 1 Care instructions After every 10 000 km but at least 1 time per year the pallettrailer has to be inspected The following points are important e Check bearings Check brakes and brake lining Check the hydraulic piping and components for leaks and damage Grease nipple s to lubricate upper cylinder ball Control lights Check tires The following parts are subject to wear and s
10. hould be specified as the value exceeded replaced e if the brake lining thickness lt 1 mm e tires when profile thickness lt 2 5mm 22 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 5 1 2 Repairs Replacement of parts During the warranty period repairs should only be carried out by manufacturer or their dealer All parts replaced must at least meet the specifications of the original parts All parts can be ordered from manufacturer The pallet trailer consists of standard components commercially available and specific components for this trailer produced especially Standard parts Preferably the original make If in doubt about the specifications Refer to manufacturer Specific components Replacement parts supplied only by the manufacturer may be used Warning Deviate from the above requirements may affect the safety of the pallettrailer Manufacturer or their dealer can not accept any liability 23 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning Annexes Annex 1 Additional technical information associated with manual Tightening torque wheel bolts M12x1 5 19 110 120 Optimale bandenspanning 155 70R 12C 6 5 94 900 Electrical installation Lighting is powered by the towing vehicle Wiring diagram 13 pin Weu TI Functie 1 Yellow Direction left 2 Blue Fog light
11. le ball pressure see the specifications of your towing or vehicle and the label of your pallet trailer must not be exceeded The ball pressure can increase or decrease the load further forward or backward sliding The optimum nose weight is close to the maximum vertical load With careless loading slip of crankdanger arises Adjust your speed to the road conditions and the load This applies in particular for bends Make sure that the wheels do not have side impact and that the tires are unbalanced Warning A negative pressure ball is strictly prohibited This means there is an upward force on your towbar 18 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 3 8 4 Before driving off Driving position To get ready for transport the pallettrailer needs to be charged in driving position This means that the trailer with and without a load is ready to be transported Behind a towing vehicle To bring the pallet trailer in driving position the following steps must be completed e forks need to be hoisted up e latches on the left and right side must be closed e The tailgate is closed and locked according to instructions 3 8 2 e The red valve on the pump should be opened making the latches on the left and right front fall into their trap position and the forks are supported by the tailgate Important Check if all latches are closed and supported into their trap position e If there
12. n from Dutch version copyright Metaal Centrum Dunning 3 6 3 Protection of the environment Dangers of environmental pollution are present in the form of e Hydraulic oil e Tire Dispose these substances according to local rules of environmental legislation 3 6 4 Dispose of the trailer If the pallet trailer is demolished the rules should be applicable at the place and at the time of the demolition Observed for waste disposal the oil present in the pallettrailer is to be considered as chemical waste and has to be processed that way This also applies to the tires In the spring brake energy is stored Dispose one must be aware that this energy is released in a safe manner Further in the pallet trailer only generally well known materials are used At the time of construction waste this opportunity existed and there were no special risks known to the persons responsible for the demolition See also section 3 6 3 Protecting the environment 3 7 Check before use The pallet trailer should be checked on the following points before each use 3 7 1 Tire e Tires must be undamaged and in good condition e Tirepressure should be as stated in annex 1 e Wheels must be mounted using five wheelbolts per wheel e Fenders and mudflaps need to be properly fitted to the designated locations 3 7 2 Coupling e Coupling must be undamaged and be in good condition e The red safetycable has to be undamaged and properly connected to the
13. ns in this document are also applicable legal rules for the use of pallettrailers such as vehicle registration license plate speed limits etc These legal requirements may vary from country to country and may be modified in the course of time Make sure you are informed Both user operator and service personnel must be aware of what is described in this manual and must follow the guidelines as described 6 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning Identification This document was originally written in Dutch by Metaal Centrum DUNNING located at Bremenweg 6 Groningen Registered at the Chamber of Commerce Northern Netherlands under number 54090504 Hereinafter referred to as manufacturer Warranty and Liability Warranty Unless otherwise agreed in writing by the warranty set out below The manufacturer shall provide warranty on chassis parts to the first user to 12 months after delivery unless otherwise required by law Defects in support wheel are outside the warranty assessment Defects in the cylinder are outside the warranty assessment Los of separate parts are outside the warranty assessment Defects must be reported before the expiration of the warranty from the manufacturer The warranty applies to defects e occur during normal use of the pallettrailer e caused by faulty construction or materials e caused by poor workmanship by the manufacturer The warrant
14. r or control changes in the assembly of the trailer changes in the original assembly of the pallettrailer The manufacturer is not liable if the customer all its obligations to the manufacturer financial or otherwise has not been met consequential damage caused by faults or defects in the pallettrailer for example damage to handle products business interruption delays etc 8 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 1 General specifications Brand MCD Type SW750EG Year build 2013 1 1 Technical specifications 1 1 1 Dimensions Dimensions pallettrailer 295 x 195cm Dimensions loadingspace 130 x 125cm 1 1 2 Weights Maximum weight 750kg Weight pallettrailer 360kg 1 1 3 Tire Tiresize 155 70 R12 Tire brand GT Maxmiller Carrying capacity 900kg per tire Bandendruk 6 5 bar 1 1 4 Internia brake Brand type KNOTT KF13C Maximum weight 1300kg 1 1 5 Hydraulics installation Maximum load cylinder 2500kg 300bar Maximum pressure slang 180bar Dispensing pump 25cc per stroke Capacity oil reservoir 2liters 9 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 2 General description The pallettrailer is intended for the transport of goods and must be towed by a towing vehicle The pallettrailer which these instructions relate suitable for transporting a total weight of up to 750kg The pallet
15. right Frontside Standard lightning Red 2 Left and right Backside Licenseplate lights White 2 Left and right Backside Brake lights Red 2 Left and right Backside Reversing lights White 1 Left and right Backside Fog lights Red 1 Right Backside Direction lights Orange Amber 2 Left and right Backside Hazard lights Orange Amber 2 Left and right Backside Reflectors Orange Amber 4 Left and right 2 each side on the right and left These lights has to work in the same time The direction Lights has to work on the left and right side Plug should be checked on dirt corrosion and damage 4 4 Hydraulics installation Hydraulic pump oil level Check the level of hydraulic oil and add oil as necessary The oil level should be measured in sagging position of the forks The sight glass should be filled Use oil as recommended in annex 1 The hydraulic hose should be checked for damage breakage and dryness periodically The hydraulic cylinder must be checked for damage and corrosion periodically Warning If the pallet trailer is going to be unused for a longer period eg one week it is recommended supplied wheel chocks to be used instead of the parkingbrake for parking Also forks should be fully lowered so that the cylinder is fully retracted thereby preventing corrosion of the cylinder rod 21 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 4 5 Chassis The chassis must be c
16. s above could cause damage and serious injury Before use check the items described 13 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 3 8 Use regulations 3 8 1 Connect and disconnect Drive only in gt gt lt lt area Connect Open the clutch housing by pressing the lock button on handle H and move the handle upwards Then put the opened coupling onto the ball on the hitch of the towing vehicle and release the handle The handle should now automatically slide back into the initial state Close and secure automatically Note the correct position gt gt lt lt see figure above Attach the breakaway brake cable see Figure 4 2 in and connect the plug to the towing vehicle Rotate the support wheel up and fix it parallel to the direction of travel support wheel should not obstruct brake rod Check the bal of the hitch is in the coupled condition no longer visible Disconnect Turn down the support wheel Disconnect the breakaway brake cable and the power cord from the towing vehicle Open to press the clutch housing the lock button on the handle H and then moving up Lift the trailer hitch of the towing vehicle Note when disconnecting on a slope In braked pallet trailer brake use or if present wheel lock Warning In case of damage or inability to perform one of the above instructions you shouldn t use the pallettrailer under any circumstances Note By disconnec
17. see 3 8 2 2 Open the latches on the left and right front 3 Open red valve on the pump 16 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 3 8 3 2 Lifting In order to raise the forks of the lifting device it is necessary to carry out the following steps 1 Open the loading area see 3 8 2 2 Open the latches on the left and right front 3 Make sure that the red valve of the pump is closed 4 Pump up the cylinder using the supplied pump handle Warning During the lowering and lifting is prohibited to be located in the loading area and the user should have sight on what s happening in the loading area at all times Warning To avoid damage and injury while lifting it s not allowed to have any contact with the pallettrailer than only with the pump Waring During the lowering and lifting the pallet trailer should be on it s handbrake 3 8 4 The load of the pallettrailer Maximum load The maximum load must not be exceeded The maximum load is equal to the empty weight of the trailer plus the pallet load Maximum load empty weight load capacity Empty weight the weight of the pallet trailer in running order ie with spare parts and tools belonging to the normal equipment but without the load Load capacity maximum load or the maximum payload Weight distribution For the best possible braking and handling the center of gravity of the load should be as short
18. ticular the working conditions This documentation does not describe additional security measures Fulfilled however the necessary information about the pallettrailer data Check with your government or security officer Activities that are described in Chapter 4 may only be carried out by appropriately qualified personnel 3 2 Safetyrules e Ensure that unauthorized persons such as children may not operate the pallettrailer if there is no supervision If there is no supervision the lifting handle must be removed e Only people who read the operating instructions and understood them may operate the pallettrailer e The lifting device should only be used if the pallettrailer is stationary with the handbrake on and is disconnected s Do not climb on the pallet trailer used when it s in use 10 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning Make sure there are no people in the loadingarea when loading Safety devices must not be removed or disabled Keep the work area clean and free of obstructions Provide adequate lighting conditions Beware of crushing between the chassis and the lifting device Exceeding the maximum load is not allowed see type construction plate Exceeding the maximum permissible ball pressure is not allowed see type construction plate Exceeding the maximum load of the tie rails is not allowed e When using the pallettrailer the operator must be
19. ting on a slope If slope in direction descends use the handbrake if present slope increases use the wheel lock present on the trailer 14 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 3 8 2 Open loading area The loadingarea of the trailer pallet can be accessed through the following steps 1 Unlock Unlock the tailgate by releasing the lock 2 Tilt Now that the tailgate is unlocked you can tilt the rear tailgate 1 4 turn upwards 3 Lift up in tilted position turn the rear up to the left side 4 Lock In vertical mode the tailgate has to slide around the safety pawl see figures shown below Warning The locking described in step 4 should be observed with care Improperly performing this operation can cause damage and injury The correct perform of this operation is the responsibility of the user Warning It is prohibited in all situations to enter the loading area 15 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning 3 8 3 Lift The lift is by means of a hydraulic system and is to be operated by the user of the pallettrailer The operator s position is located on the front of the pallettrailer The hoisting can be divided into 2 parts lower and lifting Pump handle holder W I 3 8 3 1 Lower To lower the forks of the lifting device it is necessary to carry out the following steps 1 Open the loading area
20. trailer is equipped with a lifting function with which goods can be lifted from the ground and then can be transported 2 1 Intended use machine The pallettrailer has to be towed by a towing vehicle with an approved towbar concerning the applicable standards The trailer includes a pallet lift function this means that the cargo can be moved upwards and downwards with the help of the installed hydraulic system and the devices attached thereto The pallettrailer should be used to uplift or lowering goods within the capabilities of the pallettrailer and transport of goods within the rules of the road traffic 2 2 Not permitted use Attention is drawn to the following applications for which the pallet trailer is not suitable e The transport of persons or livestock onto the pallet trailer e Use as a lifting device for both people and livestock 3 Safety 3 1 Introduction This pallet trailer is designed and constructed so that they can be used safely Maintain and this applies to the application the conditions and requirements as described in this documentation Reading the documentation and follow the instructions are so essential for anyone who s working with or on this pallettrailer If used it is the responsibility of the owner employer that these instructions are known and also used by the staff There may be additional security measures prescribed by the company or the country where the pallet trailer is in use This concerns in par
21. uence Item Special attention After the first use Wheel fastening Check wheel bolts and tighten if necessary Each time after the first ride after a wheel has been disconnected Wheel fastening Check wheel bolts and tighten if necessary Every 1500km once a year Internia brake Grease nipples lubricated with grease sliding parts with oil Every 10000km once a year Bearings brakes brake lining Serviced by an authorized dealer or trailer company Before each use See 3 7 4 1 Tires Check after the first ride of the wheel bolts are tightened enough if necessary retighten Follow the table with tightening torques as you find it in the appendix Repeat every time there is a wheel has been disconnected for example if a tire has been changed wheel bolts crosswise tightening 4 2 Coupling Internia brake All moving parts and bearings regular cleaning and greasing 20 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning Internia brake lubrication Lubricate with grease see figure below and the sliding parts with oil Handbrake Lubricating nipples Coupling Safety brake cable 4 3 Lighting Lighting needs to work properly this implies that the following elements are operated using the pallettrailer Indication Color Amount Left Right Side Frontlight White 2 Left and
22. y does not cover defects caused by e normal wear and tear e Improper or inappropriate use e use of consumables other than prescribed When faults occur under warranty the manufacturer shall e repair the defects e replace the parts The manufacturer is the owner of the replaced parts e choose another alternative solution if recovery is not reasonably possible The owner must give the manufacturer the opportunity to correct any deficiencies For in adjoining parts of the third party vendor warranty terms apply The warranty period may vary from what is shown above The manufacturer reserves the right to change the pallettrailer without notice When claiming warranty the user must follow this user manual and has to demonstrate that the rules are followed as described 7 Version date 01 2014 translation from Dutch version copyright Metaal Centrum Dunning Liability The manufacturer is not liable for unsafe situations accidents or damages that result from ignoring warnings or instructions as shown on the pallettrailer or this documentation for example incorrect or improper use or maintenance the use for other purposes or under conditions other than those specified in this documentation the use of parts other than specified repairs without the permission of the manufacturer changes to the pallet trailer These include changes in the control welding mechanical processing etc extensions to the pallettraile
Download Pdf Manuals
Related Search