DVR User Guide Table of contents
Contents
1. 2 1 2 Monitor installation 2 1 3 PTZ camera installation Connect the camera to CH1 CH4 camera in at back panel of DVR Note Please do not power on the DVR before the camera installation is finished Connect the video in of monitor to Video out of DVR Note Please connect the Speed dome camera D D to the DVR RS485 D D DVR User Guide 2 1 4 SPOT installation mm SPOT Of Video Out will only display the NE MOTION or ALARM triggered channel 2 2 Sensor and alarm installation 2 2 1 Alarm Input amp Output D1 D4 for Alarm Input GND 4 alarm input for connecting to external sensors Please refer to the pinout assignment which printed at back panel Relay Output NO NC COM The application of relay output is NO COM NC COM 2 2 2 Sensor installation Alarm will be triggered by one or more than one alarm Input s D1 D4 become short or open circuit with GND Internal circuit DVR User Guide 2 2 3 Relay output installation Alarm output can be NO Normal Open or NC POWER normal Close depending on the settings SUPPLY NO COM the NO and COM is open circuit and will become closed circuit when alarm is triggered NC COM the NC and COM is close circuit and will become open circuit when alarm is triggered 2 3 Network installation Connect the network RJ45 plug to Ethernet jack at back panel Ethernet Setup between ADSL an2. Viewer Search Backup O Player 1 DVR Edit ES OVR Delete DVR Name Confirm Name MAC IP Port Last Modified Tool No Data Select Add DVR to add DVR information DVR Name MAC Address ex000A00FF0199 without Add DVR information DVR NAME Enter the DVR name MAC ADDRESS Enter the DVR s MAC address DVR s MAC address can be found in DVR s SYSTEM MENU gt EXTERNAL DEVICE gt TCP IP SETUP gt IP SETUP IP Enter the current IP address for DVR PORT Enter the port number for DVR Note DVR NAME and MAC ADDRESS are required IP address and PORT number can be blank Press OK to save the settings My DVR List Click Web Viewer icon on the right side of ACT to operate Web Viewer You should add www j2kdvr com on Trusted Sites Tools gt Internet Options gt Security at first webviewer installation DVR Setup Transmitter Viewer Search Backup O Player E DVR Edit E DVR Delete DVR Name Conf rm Add DVR Logout MAC IP Port Last Modifies 00 04 01 23 45 67 2007871314 MEBs gg TRANSMITTER H 264 viewer BACKUP Backup record data in the remote site PLAYER Backup player DVR SETUP Setup DVR from remote site Edit and delete DVR information EDIT To edit the DVR information DELETE To delete the DVR information AQ DVR User Guide Appendix 1 System configuration Client PC Sensor Alarm IR remote controller Camera 1 4 ry ka ree INTERNET ET
3. Set up the recording picture quality Quality level Lowest Low Normal High Highest Data size of image in PAL system is a little bigger than NTSC system but the total recording time is same as NTSC system REMAIN SIZE Indicates HDD capacity remains by size GB Indicates total HDD capacity GB REMAIN TIME Indicates HDD capacity remains by time D days H hours M Minutes ae ae 4 3 2 SCHEDULE RECORD SCHEDULE SETUP OE EE ER ESE DEFAULT ESC Note If the DVR is set to MOTION RECORDING and the DVR keeps recording continuously or is not DVR User Guide Program the recording schedule for the whole year Set up the recording mode in different date time Mia E Alarm recording When there is an alarm triggered EJ E Motion recording when there is motion detected Continuous recording Entran M Motion recording Alarm recording ALL All blocks can be activated or deactivated 00 24 Hour To activate or cancel the hours SUN SAT To activate or cancel the day triggered as you expect please adjust the sensitivity settings and the motion mask setup in CONFIGURATION gt MOTION SETUP 4 4 CONFIGURATION CONFIGURATION HDD MANAGEMENT CAMERA SETUP MOTION SETUP ALARM SETUP SEE WA SE TUP TIME DATE SETUP PASSWORD SETUP BUZZER oe Lt ESC HDD MANAGEMENT HDD SETUP HDD Clear HDD INFORMATION CAMERA SETUP CAMERA TITLE CAMERA COLOR
4. Ej a TCP IP RS232 KE gt Printer eo o LA TA Pan e 19 SR TF Microphone P T Camera 1 4 W Speaker Main monitor Spot monitor Configuration of DDNS connection DDNS Server T v Access server y A Update IP IP LE Client PC DVR connect to DDNS server automatically and update the IP address The client accesses to DDNS server and requests IP address from DDNS server DDNS server replies the IP address and port number for DVR Client PC connects to DVR Appendix 2 Network setting a A NA 41 DVR User Guide A2 1 Network installation and setup A2 1 1 Connecting to internet through a Cable modem Dynamic IP DHCP Direct Connection Cable modem INTERNET Client PC SYSTEM MENU gt EXTERNAL DEVICE gt TP IP SETUP gt IP SETUP gt DHCP MODE Place the cursor at DHCP MODE and press ENTER to switch the DHCP MODE to AUTOMATIC Then move the cursor over DETECT IP and press ENTER to detect IP DVR will automatically get the IP ADDRESS SUBNET MASK and GATEWAY from the Cable Modem and shows the IP information on the DVR Press MENU and go back to the previous setup page TP IP SETUP Go to IP SETUP to set up the port number You can either use the default port number or assign a new one A2 1 2 Connecting to internet through ADSL First identify if you have Static IP or Dynamic IP service If you do not know ask your ISP
5. Enter the IP address of DVR PORT Enter the PORT of DVR ID Enter ID default ADMIN PW Enter the password Status Window Shows the current connection status 8 Screen display Signal channel Quad display selection PTZ control P T Z and Zoom In Out control for speed dome camera 6 AUDIO Audio ON OFF setup CONNECT DISCONNECT CONNECT Connect to DVR DISCONNECT Stop the connection with DVR O IP PORT ID PW IP Indicate the IP address of DVR PORT Indicate the PORT of DVR ID Default ADMIN PW Enter the password Screen display Signal channel Quad display selection 6 Status Window Shows the current connection status Recorded data display Displays starting time amp ending time of recorded data 6 Playback function 2822 Fast Rewind E Rewind Fast Forward Forward Search bar Click to search recorded video Search time Enter date and time to search video 6 CONNECT DISCONNECT CONNECT DISCONNECT with DVR DVR User Guide 6 5 Remote backup process O Backup Information IP Address Enter the IP address of DVR Network Port Enter the port of DVR User ID Enter ID default Admin User Password Enter password Save File Path Setup a path to save the backup file This function is active only when the connection is established Start Backup Time The starting time of file backup This function is active only when the connection is
6. 4 Without clearing HDD or running factory defaults after a new HDD is installed 5 When Overwrite function is set to OFF and HDD full 6 When Backup in process 7 When firmware update in process de DVR User Guide 3 5 Playback Network status eo 2007 07 07 PMO7 00 00 CA De 77 Disconnect Fea Network search OVERWRITE status icon gt FORWARD PLAY 4 BACKWARD PLAY Ol PAUSE gt gt FAST PLAY 44 BACKWARD PLAY RE EU ZT Ae Quad mode EEN 14 MOVE TO THE BEGINNING AUDIO STATUS 4 BACKWARD PLAY 1 AUDIO ON White AUDIO OFF GRAY MUTE D FASTEST PLAY FASTEST BACKWARD PLAY PI MOVE TO THE END 4 INCREASE PLAYBACK SPEED y DECREASE PLAYBACK SPEED A SEARCH STOP PLAY 3 5 1 Playback and Stop CREER MANE Left click Play icon to start playback Click Stop icon to stop playback Starting from the last playback time _ 2 3 9 2 Search mode 3 5 3 PERCENT SEARCH LIVE REITIDCIESEARSE a PLAYBACK SEARCH PERCENT SEARCH TIME DATE SEARCH EVENT SEARCH 3 5 4 DATE TIME SEARCH SEARCH PERCENT SEARCH TIME DATE SEARC EVENT SEARCH PERCENT SEARCH START 2007 SEP 07 PM 01 00 00 END 2007 SEP 09 PM 01 00 00 TARGET 2006 SEP 08 PM 01 00 00 PERCENT ae PLAY 020 ESC TIME DATE SEARCH PLAY L START 2007 SEP 07 PM 01 00 00 EN
7. E MOTION a CONTINUOUS Mi NONE a ALARM MOTION VONTINUOU ARMOR NONE Note DVR User Guide RECORD SCHEDULE SETUP Set up a recording mode ALARM ALARM recording MOTION MOTION recording CONTINONS CONTINUOUS recording ALM MOT ALARM MOTION recording NONE No schedule recording ALL All blocks set to activated or deactivated 00 24 Hour On Off setup for different hour SUN SAT On Off setup for different weekday lf the DVR is set to MOTION RECORDING but it keeps recording continuously or is not triggered as you expect Please check the sensitivity settings and the motion mask setup in CONFIGURATION gt MOTION SETUP lf the motion settings are too sensitive or not sensitive enough please adjust the sensitivity level and define a more suitable motion detection area Configuration Audio AUDIO SETUP I AUDIO CHANNEL CHANNEL 4 I INPUT VOLUME 15 a I OUTPUT VOLUMI 7 al 34 EXTRNAL AUDIO AUDIO CHANNEL Select the channel for audio recording ON OFF setup INPUT VOLUME Volume setup for microphone OUTPUT VOLUME Volume setup for speaker 6 3 Remote viewer operation 6 4 Remote search operation You may experience slower playback speed in WAN than in LAN due to the network loading limit During the remote playback under WAN you may not be able to see the effect of Fastfoward and Fast Rewind 35 DVR User Guide O IP PORT ID PW IP
8. Internet Service Provider If you have Static IP your ISP should provide you a static IP address which will never change even when you reboot your modem With Static IP Static IP Manual Direct Connection _ ADSL modem p Client PC SYSTEM MENU gt EXTERNAL DEVICE gt TP IP SETUP gt IP SETUP Enter the IP address gateway subnet mask provided by your ISP Then assign a port number to the DVR or you can use the default one as well If you find that you cannot enter or change any addresses check if DHCP is set to Automatic Press MENU to go back to the previous page TCP IP Setup and then enter IP SETUP Select DHCP MODE and press ENTER to switch DHCP to MANUAL 42 DVR User Guide With Static IP via Router static IP Manual ADSL modem Router 4Client PC In some very rare cases we found the DVR did not support certain Static IP Addresses If it happens add a Router to the network system The setup is the same as the next session With Dynamic IP Dynamic IP Manual ADSL modem Router INTERNET 4 Client PC For Dynamic IP address the IP address will be changed from time to time If you are using ADSL service with Dynamic IP you must add a Router in the network system unless your DSL MODEM has a built in Router EXTERNAL DEVICE gt TCP IP SETUP gt IP SETUP Enter the virtual IP address for the DVR and the IPs of gateway and subnet ma
9. SETUP MOTION SETUP SENSITIVITY DURATION DETECT CELL NUMBER ALARM SETUP Alarm mode N C or N O setup Alarm Output Duration setup INTERVAL SETUP Switching interval between Full screen and the PIP screen DATE TIME SETUP Date and time setup PASSWORD SETUP Password setup BUZZER SETUP Buzzer ON OFF setup 18 4 4 1 HDD MANAGEMENT HDD MANAGEMENT MODEL MAXTOR 6Y080L0 SERIAL 53243212 BLOCKS 3201 3036 LBA SIZE 160 GB PEEL ei OVERWRITE ENABLE FORMAT ESC 4 4 2 CAMERA SETUP CAMERASETUP CHANNEL TITLE CAMO1___ BRIGHTNESS 0 CONTRAST 0 STATURATION 0 HUE 0 D FAUT ALLEFAULF ESC 4 4 3 MOTION SETUP MOTION SETUP CHANNEL 1 SENSITIVITY 5 RE DURATION 05 anena SIZE 01 DEFAULT ALL DEFAULT ESC DVR User Guide HDD information display MODEL model No SERIAL serial No BLOCKS number of blocks SIZE Capacity SPEED data process speed FORMAT format HDD all record will be erased CHANNEL Select the camera to be adjusted TITLE TITLE camera name max 8 characters BRIGHTNESS Adjust image brightness 32 31 CONTRAST Adjust color contrast 32 31 SATURATION Adjust color saturation 32 31 HUE Adjust color hue 32 31 CHANNEL Select the channel to be adjusted SENSITIVITY Adjust motion detection sensitivity 1 LOW 7 VERY HIGH DURATION The recording period after last motion detected For example the du
10. address to the DDNS server automatically D day H hour M minute Use Mouse Wheel to change the value REGISTER Connect to DDNS server and register the DVR information to the server Click REGISTER to start the registration DDNS STATUS Display the current status of DDNS connection IP ADDRESS Display the current IP address recorded in the server IP PORT Display the current IP port recorded in the server REMAIN TIME Display the remaining time to report to the server LAST REGISTRATION DATE Display the time of the last registration 904 4 5 2 PAN TILT SETUP COMMAND SETUP CHANNEL 01 MODE PELCO D PTZ ID 001 BAUDRATE 2400 BPS CMD DELAY 1 MSEC COMMAND PAN TILT STOP LENGTH 16 CODE 00 00 00 00 00 00 00 00 00 00 00 00 00000000 DEFAULT ALL DEFAULT ESC SPEED SETUP PAN SPEED TILT SPEED ZOOM SPEED DEFAULT 4 5 3 MOUSE SETUP pe A ESC MOUSE SETUP SENSITIVITY DEFAULT WwW ESC DVR User Guide COMMAND SETUP CHANNEL Select video channel MODEL Select PTZ protocol PTZ ID PTZ ID setup BUADRATE Baud Rate setup for the connected PTZ camera CMD DELAY Set up the delay time to run the command COMMAND Display the COMMAND name Click to change COMMAND LENGTH Display the code length for the selected COMMAND CODE Display the code for the selected COMMAND SPEED SETUP PAN SPEED PAN speed setup TILT SPE
11. the record start End time of DVR Recorded End Time 2006 01 03 17 46 35 i a 3 Select Set Backup Time to setup the Ratt a a backup function Maximum Save File Size 30 gay MB 4 Click Apply to apply all setup Year Month Day Hour Minute 5 Select Start Backup to active the backup Start Backup Time zx B TE Fa TB sl a t User can stop anytime during Er ackup e End Backup Time a Ba ma Display the recorded start end time 8 Click on Find to setup the path for saving the backup file Setup the file size limitation of backup file 30 700MB Setup the start end time of backup O Current time display Status Window Display backup starting ending time and status 8 Screen display Signal channel Quad display selection Function keys OPEN Open the backup file EDIT Edit the backup video AVI SAVE To save as the AVI format EXIT Logout the program 6 Playback speed setting button Upper button faster 6 aasia key Lower button slower DELAY Adjusts playback interval The higher the slower 1 2 4 8 16 32 AUDIO Set Audio ON OFF Playback bar Click to search the recorded video Go to the beginning of recorded data and play Fast backward playback Backward playback 4 PAUSE Forward playback 7 Fast forward playback Go to the end of recorded data and play 377 DVR User Guide 6 6 1 Save AVI file Len OPEN 1 Click to open the ba
12. tin 30 DVR User Guide 0 3 Remote VIC WEF operation asi il odds 35 6 4 Remote search Operation cccccsccccscccceececeececeuececseccceeecueesesececeeeseneecaueessueceseesecgeessaeesesseeeneeens 35 6 5 Remote DACKUD PrOCS SS ainia naa ica 36 6 6 Backup player opera in A aloitwndeunssomart 37 6 7 DDNS Setup and IN o cd eck 39 Appendix 1 SYSTEM Contigua ia 41 Appendix 2 NetWork Se ItNO arica ia aa eii 41 A2 1 Network installation and Ud a 42 A22 ROOS eU a A E en N 44 Disclaimer m The product names mentioned in this manual are used as identifications only while the copyright of these names might belong to other companies m The product specs and information are for reference only and may be updated from time to time without notification DVR User Guide Caution m For you safety unplug the power before moving the DVR installing or replacing any parts or hard drive m Make sure all the power cable and wires are properly set up before using the DVR Contact your distributor immediately if there is any defect m To avoid a short circuit don t leave any unnecessary parts inside the DVR m Please avoid dramatic changes of the environment such as dust temperature and humidity Keep the DVR in a temperature ranging from 5 C 40 C m Keep the DVR in a well ventilated place and away from any heat generating objects Do not block the DVR s fan and vent Do not expose this unit to the sun directly MH lf yo
13. with PORT 8000 the router will forward the packets to its matching destination 192 168 1 53 and thus connect the client to the DVR 45
14. 4 Camera Video Input CAMERA IN video in for channel 1 4 5 Monitor SPOT Output MONITOR For video monitor SPOT For SPOT video monitor DVR User Guide 1 3 IR remote controller overview O Live view function control MODE 4 split display ZOOM To enlarge the display The selected area can be moved by the direction buttons FRZ Freeze the display SEQ Automatically change the display channel in sequence PIP Picture in Picture Press again to switach in between PIP mode and full screen mode FUNC Enter setup menu REC To activate Emergency Recording AUDIO AUDIO On Off 0 9 number Live display channel selection password entering MENU Enter setup menu Exit menu STAND ALONE DVR For value adjustment in setup menu 6 OK ENTER amp Direction keys Select or adjust options in setup menu Navigate the selected item in setup menu Play back Functions SEARCH Open the playback search window PLAY Play the recorded video directly PAUSE Pause playback REW Fast rewind press again to change the speed FF Fast forward press again to change the speed STEP Picture by picture playback SLOW Slow motion playback press again to change the speed O PTZ control Enter the PTZ camera speed dome camera control mode DVR User Guide CHAPAPTER 2 Installation 2 1 Camera and monitor installation 2 1 1 Camera installation a ci pr MS Ho
15. CONFIGURATION HDD MANAGEMENT DATE TIME SETUP CAMERA SETUP INTERVAL SETUP ALARM SETUP BUZZER SETUP PASSWORD SETUP EXTERNAL DEVICE TCP IP SETUP SPOT MONITOR SETUP PAN TILT SETUP AUDIO SETUP BACK UP Backup the selected video FIRMWARE UPGRADE Upgrade firmware by using CD RW or USB memory stick FACTORY DEFAULT Reset the DVR to factory defaults LANGUAGE Change the OSD MENU language RESLOUTION Change VGA resolution Default Resolution for VGA is 800x600 Options 640X480 60Hz 800X600 60Hz 1024X768 60Hz 1280X1224 60Hz 640X480 75Hz 800X600 75Hz 1024X768 75Hz 1280X1024 75Hz 10 4 2 2 SCREEN SETUP VERTICAL POSITION 24 HORIZONTAL POSITION 00 BORDER ENABLE ON BORDER COLOR WHITE DEFAULT ae 4 2 2 OSD SETUP OSD SETUP TOPOSDOFESET DEFAULT 4 3 RECORD RECORD SETUP SEAEGULE SETUP ESC 4 3 1 RECORD SETUP RECORD SETUP QUALITY HIGHEST REMAIN SIZE 1366 1606 REMAIN TIME D 05 H 00 M 35 DEFAULT ESC DVR User Guide VERTICAL POSITION Adjust the vertical position of display HORIZONTAL POSITION Adjust the horizontal position of display BORDER ENABLE Enable the display of border BORDER COLOR Adjust the color of border TOP OSD OFFSET sessnentnsss Adjust the location of Top OSD LT me wk PEL Men LORA RECORD SETUP Set up the recording picture quality SCHEDULE SETUP Program the recording schedule QUALITY
16. CTION FUNCTION ALARM GND ALARM D4 ALARM D3 ALARM D2 ALARM D1 Note Connect the D D of soeed dome camera to the D D of DVR 5 1 2 PTZ setup Different baud rate setting may be required for different PTZ camera speed dome Please refer to soeed dome camera user s manual for proper baud rate setup camera EXTERNAL DEVICE COMMAND SETUP MAIN MENU DISPLAY SETUP RECORD SETUP EXTERNAL DEVICE BA UF FIRMWARE UPGRADE FACTORY DEFAULT EXTERNAL DEVICE VU U wir AUDIO SETUP SPOT SETUP COMMAND SETUR LANGUAGE ENGLISH EXIT CHANNEL 01 MODE PELCO D PTZ ID 001 BAUDRATE 2400 BPS CMD DELAY 1MSEC COMMAND PAN TILT STOP LENGTH 16 CODE 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DEFAULT ALL DEFAULT ESC SYSTEM MENU gt EXTERNAL DEVICE gt PANTILT SETUP gt COMMAND SETUP MODEL Select protocol PTZ ID Enter the device ID BAUD RATE Baud rate setup CMD DELAY The delay time for next command Please refer to the PTZ camera user s manual for the suggested value 2 DVR User Guide 5 2 PTZ camera operation Left click PTZ icon to enter the PTZ control mode PAN TILT control Click these arrow keys to control Pain Tilt of connected PTZ camera ZOOM IN ZOOM OUT control ZOOM IN move moue cursor to ZOOM OUT move moue cursor to 28 DVR User Guide CHAPTER 6 S
17. D 2007 SEP 10 PM 01 00 00 TARGET 2006 SEP 09 PM 01 00 00 ESC sig DVR User Guide Click SEARCH icon to open the search window There are 3 modes for search PERCENT DATE TIME EVENT PERCENT SEARCH Search by the percentage of recording DATE TIME SEARCH Search by the assigned time and date EVENT SEARCH Search by event list Using Mouse wheel on percentage number to change recording percentage of the search bar Click on PLAY icon to confirm and start the playback START The starting date and time of recorded video It shows the starting date and time of the recording data END The ending date and time of recorded video It shows the ending date and time of the recorded video TARGET Enter the assigned date and time to start playback The targeted date and time can be adjusted by Mouse wheel Click PLAY icon to start playback 3 5 5 EVENT SEARCH EVENT SEARCH SEARCH TIME DATE CHANNEL EVENT PERCENT SEARCH TIME DATE SEARCH EVENT SEARCH ey tay They Se ay Sy 1 1 1 1 I 1 1 1 1 1 1 1 1 1 1 PAGE 000 000 3 5 6 Playback speed adjustment IE ESC DVR User Guide DATE TIME Shows the event date and time CH Video channel in No of happened event EVENT Shows the type of events Motion detection MOT Image lost LOS Alarm trigger ALM Max Event list recorded 1000 events Select events le
18. DVR User Guide Date 2007 11 16 VER 1 01 Table of contents MUNI OMY scare e ie tg ec E E AE E Ne lt eh a a ae tld 1 FIC ACC Re A de ne 2 A D on N ASEA A E a de ee 1 ia y ne re eer N S ne reer 2 CAR We cl A PTrOdUC TOVE VOW SR ad 3 ter Erontpaneclo Ve Wars 3 1 2 B ck panel OV MIN Sn ee cena a 3 1 3 IR remote controller OVErVICW cccccecceeeceeetseeteeececeecceceneceueceueceueceeetseeeseeteeteeeaeesseeseeeseeeteeeteeenaes 5 CHAPAPTER 2 Inst er a nn A t n de dope ann Dit D decide 6 2 Camera and monitor installato A lent tee 6 2 2 Sensor and aldim INStAN AON rita 7 23 NeIWOniAsta laico A diodo 8 A O oP nee me ee ee emer ee ee 8 Z MOUSE NMS tall UO satan setae taes cleat te ae Ne ue de Mb a tic saan ne de or 9 220 POWGT PIO IM Oia iaa 9 CHAP TERS BASIC OD RAIONE a ld men die ec 10 3IBDISplay cont guata 10 32 MOUS COMORES tee rere peter Renae enter red 10 9 91DISDIAY SCLUD MENU aaa 10 3 4 FACCONOING ICONS ANT SANUS resirnc atienda ii de st 11 A A A eee ae ae 12 GHAPTERA Se UD MENU enaa da 15 AO aU ty cio EN ici 15 A DIS PLANS EUR rd tela 16 A OI E 17 A CGONFRIGURA TON o le 18 LS ENIERNAE DEVIO Batata 22 O A Se en en D ieee 25 47 FIRMWARE UPORAD S dE eb add 26 LS FACTORY DEA a a ie 26 DES LANGUAGE ram rar been 26 CHAPTER S P 1Z Camera CONTO its 27 SP TIZ Camera Isa NL 27 S224 12 Cameraro Per aia daran 28 CHAPTER 6 Sofiware lnstalalO Nana ari 29 6 1 Install IRS Internet Relative Software se 29 a N heh ete et
19. ED TILT speed setup ZOOM SPEED ZOOM speed setup SENSITIVITY Mouse sensitivity setup The mouse cursor will move faster if the sensitivity is increased 24 4 5 4 AUDIO SETUP CHANNEL CH1 INPUT VOLUME 15 OUTPUT VOLUME Df DEFAULT ESC 4 5 5 SPOT SETUP SPOT SETUP SWITCH INTER VAL 03 SEC ALARM POP UP ON MOTION POP UP ON EVENT POP UP DURATION OS SEC DEFAULT ESC 4 6 BACK UP HDO START END 200 77 0 77 09 10 00 00 200 770 F07 01 00 00 USE MEDIA PARTITION START END SIZE MB gt MB CHECK USB BACK UP ESC DVR User Guide CHANNEL Select video channel links with audio The linked video channel will have audio in signal channel display and playback INPUT VOLUME Volume setup for microphone OUTPUT VOLUME Volume setup for speaker SWITCH INTERVAL Channel switching time Range 01 99 sec ALARM POP UP Switch to the channel with alarm triggered MOTION POP UP Switch to the channel with motion detection triggered EVENT POP UP DURATION The display will switch to the channel with EVENT triggered Before time up as duration setup the displayed channel will not be changed even there is any other EVENT triggered Range 01 99 sec HDD START Changeable date and time for the backup start date time END Display the automatically calculated ending date and time for the backup video USB MEDIA PARTITION Display partition information for USB disk SIZE C
20. ckup file and select ia single channel 2 Click SEES to save as AVI format NT CHANNEL Select a single channel FRAME RATE Set the frame rate CHANNEL fo SIZE Setup the file size limitation FRAMERATE fio START Start AVI SAVE SIZE IOME x STOP Stop AVI SAVE 6 6 2 EDIT TOOL O Blur Increase softness SAVE Saves video in rei tom tis ed te iclder where player is installed C WEB BACKUP O PRINT Print current video 38 DVR User Guide 6 7 DDNS setup and operation DDNS SERVER This DDNS service is free We constantly maintain the server and its data base Please note that the server may be m Forget password turned off without notice for maintainence Connect to DDNS SERVER http www j2kdvr com or http 59 124 143 151 by IE browser Select REGISTER to register a new account Add a new account by entering following information Group Add a new user name User Password Add user password Confirm Password Confirm the password E mail Add an Email address for the password reminders Enter group name and password to LOGIN DDNS function 39 DVR User Guide My DVR List Click Web Viewer icon on the right side of ACT to operate Web Viewer You should add www j2kdvr com on Trusted Sites Tools gt Internet Options gt Security at first webwewer installation DVR Setup Transmitter
21. connection type you wish to use aa Ci WAN Connection Type BLW 04G Internet IP Address Subnet Mask E Gateway 211 DNS Required q 168 E 2 fies es Mk IBANE le Static IP setup Select the mode in WAN connection Type Enter the static IP Address Subnet Mask Gateway DNS provided by your ISP Save the settings 44 DVR User Guide Pci WAN Connection Type PPPoE MAC Address 00 90 CC 6E 00 68 BLW 04G Select the Internet connection type you wish to use User Name tester Password FE Fixed IP Address Enable Disable IP Address pi po fe Bo Connect on Demand Max Idle Time F Min Keep Alive Redial Period Bo Sec PPPoE setup Select PPPoE in WAN connection Type Enter User Name and Password provided by your ISP The router will get the IP address upon connection In this example we get the IP address of 211 20 82 39 A2 2 2 Virtual server setup mc Virtual Server Redirect IP Address Enable lv T ls T lt ELW 04G 4 3 xl 192 168 1 192 168 1 192 168 1 19216841 192 1681 192 168 1 192 168 1 192 168 1 192 168 1120 TETTERE EE EENEN N UU O Y ae ee Enter Virtual Server setup Enter DVR s IP 192 168 1 53 and port number 8000 Enable the port and check both protocols of TCP and UDP Save the settings before leaving this page Once the routing table is setup when the client software connects to 211 20 82 39
22. ct DDNS to use IP address and port number that you already registered in DDNS server O MEMBER ID NAME Enter member ID which you registered in DDNS server Enter DVR name which you registered in DDNS server TEST CONNECTION DDNS SERVER connection test ADDRESS PORT Enter IP address manually Enter port number manually 6 ID PASSWORD Enter ID and password for DVR same as for DVR login Default ID admin Default password no password 6 2 2 DVR SETUP MANUAL E ADDRESS PORT NUMBER Bio _ M PASSWORD CLOSE Alarm Buzzer Interval Contiguration External ALARM SETUP 1 CHANNEL NUMBER CAMERA 1 ALARM TYPE nyc DURATION 5 5 30 DVR User Guide The functions listed below can be changed over network Alarm Buzzer Interval Record Configuration Record Schedule Audio MANUAL Enter IP address and port number of DVR manually ADDRESS Enter IP address of DVR manually PORT NUMBER Enter port number of DVR manually ID Enter DVR ID saved in DVR default admin PASSWORD Enter password saved in DVR default no password CLOSE Click CLOSE to exit CONFIGURATION ALARM CHANNEL NUMBER Select a sensor channel ALARM TYPE Set up the Alarm connection type NC Normal Close NO Normal Open DISABLE DURATION Set up a post alarm recording duration and the alarm output duration The duration se
23. d Cable is different For details please refer to Appendix 2 Network Setting Steps 1 Open the top cover 2 Place the SATA type HDD Note 1 Power off the DVR before HDD installation 2 Suggested brand name of HDD Maxtor Seagate and Hitachi 3 Max HDD storage 400GB is supported DVR User Guide 2 5 Mouse installation PS 2 port in back panel Note If PS 2 and USB mouse are both connected PS 2 mouse has higher priority 2 6 Power plugging Connect the power cord to the power adapter oso Then connect the DC power plug to the power jack at back panel of DVR DC 12V Caution RIG Only the original supplied power Y adaptor is allowed DVR User Guide CHAPTER 3 Basic Operation 3 1 Display configuration Network status F Elconnect EE Disconnect 2007 07 07 PMO7 00 00 EM Network search a a n n HE MAYENNE a HDD Full status 20D HDD space display Possible recording days Record status Emergency record RED Stop record White pecegececsesscecssssecescs RER EE Function CPP LP PPS le Emergency record MENU PTZ PIP Split mode 1 4 Fullscreen HH Quad mode Status icon 5 Audio ON White Ca Audio OFF Gray x Mute PTZ mode ZOOM SEQUENCE FREEZE Ca PIP mode SEDE gt PLAY ZOOM mode SEQUENCE mode FREEZE mode 3 2 Mouse control O Left button Exec
24. d will not be recorded Range 10 990 seconds 90 DVR User Guide 4 4 6 TIME DATE SETUP Please set up the system date and time before the DVR starts al recording The date and time can be adjusted by Mouse wheel DATE 2007 JUL 09 TIME 01 00 00 DATE FORMAT Asia American European HOUR FORMAT 24HOUR MONTH FORMAT English Numeric MONTHFORMAT ENGLISH DEFAULT ESC 1 We strongly suggest completing the following settings at the initial setup 1 Set up the DATE TIME and RUN all factory defaults 2 Format HDD setup MENU gt HDD MANAGEMENT gt FORMAT 2 DO NOT change the date and time after the recording starts It may corrupt the DVR data archive and causes playback error If change date and time is required after the recording starts please format HDD to avoid error 4 4 7 PASSWORD SETUP The password consists of 1 to 8 digits Click 0 9 icon to enter the aaa password Then click ENTER to confirm and enter the system USER ID ADMIN USER ID ie ae Display User ID CONFIRM o D HUGUES Birthe e aes eee Enter the current password NEW PW Enter the new password CONFIRM PW Enter the new password again for confirmation 4 4 8 BUZZER SETUP BUZZER SETUP KEY TONE Turn on off the beeping for any button is pressed KEY TONE ON VIDEO LOSS ON ALARM ACTIVE ON VIDEO LOSS di de Li or Turn on off the beeping for video loss warning DEFAULT ESC ALARM ACTIVE Tu
25. established End Backup Time The ending time of file backup This function is active only when the connection is established IP Address Recorded Start Time Recorded End Time aa EAN aes Network Port User 1D User Password Save File Path aT Start Backup Time fp003 00 00 00 09 00 End Backup Time Fo05 05 00 00 00 00 Message Fat DVR Server Connection Receive Rates Backup Rates M Receive bos Le Save Size Ezz suo ff Stat Backup Function setup Connect Test Connection test Unlock To get the recording start End time of DVR Set Backup Time Set the start end time size and path of file backup Start Backup Active the backup function The information of DVR Server Recording Start Time Display the recorded starting time Recorded End Time Display the recorded ending time Update Update the recorded time Backup Status Message display the backup status Receive Rate display the percentage of backup image received Backup Rate display the completed percentage of backup image received Receive bps display the bps of backup image received Save Size display the size of backup image saved 36 DVR User Guide Select Connect Test to test the status to Backup Information DVR connection Recorded Start Time 2 Select Unlock to get
26. ft click Change page mouse wheel rolling While playback click To speed up the playback y To slow down the playback 3 5 7 Adjust Playback speed by IR remote controller 14 While playback use remote control to adjust the playback speed 4 Move to the beginning Move to the end 4 Rewind gt Playback 4 Increase rewind speed Decrease playback speed DVR User Guide CHAPTER 4 Set Up Menu 4 1 Log In 4 1 1 DVR LOG IN Click MENU icon to enter setup menu Click 0 9 icon to enter the password Then click ENTER to confirm and enter setup menu ca IF RAT 1084 FFI Note Default user name ADMIN password blank No default password Press ENTER key directly to enter the setup menu Caution 1 It is strongly suggested to change the password after the initial setup Please keep records of your passwords Rebooting the DVR and resetting the factory defaults will not reset the password 2 Please contact your supplier for help if the password is forgotten 15 4 1 2 SYSTEM MENU MAIN MENU DISPLAY SETUP RECORD SETUP CONFIGURATION EXTERNAL DEVICE BACK UP FIRMWARE UPGRADE FACTORY DEFAULT LANGUAGE ENGLISH EXIT 4 2 DISPLAY SETUP 4 2 1 VGA SETUP VGASETUP RESOLUTION DEFAULT 1024 768 60HZ ESC DVR User Guide DISPLAY SETUP SCREEN SETUP OSD SETUP RECORD SETUP RECORD CONFIGURATION SCHEDULE SETUP
27. hangeable capacity used for video backup BACK UP Click on BACK UP to start the backup process The backup file will be saved in AM4 format Users need to install the program of BACKUP PLAYER to playback the backup file 25 4 7 FIRMWARE UPGRADE CHECK USB UPGRADE ESC AWARE UPGRADE DVR User Guide The firmware can be upgraded via USB pen drive CURRENT VER 90 46 VER 1 0 UPGRADE VER Enter the FIRMWARE UPGRADE menu for firmware upgrade process through USB port Through USB port Click CHECK USB then click UPGRADE The message POWER OFF AND POWER ON will be displayed when firmware process finished Please restart DVR by power off then power on 4 8 FACTORY DEFAULT Click on ON or OFF to change the setting ALL ON Click on DEFAULT to reload the Factory Default settings DISPLAY SETUP ON RECORD SETUP ON SCHEDULE SETUP ON CAMERA SETUP ON CONFIGURATION ON EXTRNAL DEVICE ON He HALT ESC 4 9 LANGUAGE 1 The password will not be changed by Factory Default 2 Running both Factory Default and FORMAT HDD process are suggested after a new HDD installed MAIN MENU LANGUAGE DISPLAY SETUP RECORD SETUP CONFIGURATION EXTERNAL DEVICE BACK UP FIRMWARE UPGRADE FACTORY DEFAULT LANGUAGE ENGLISH Change the OSD language 96 DVR User Guide CHAPTER 5 PTZ camera control 5 1 PTZ camera Installation 5 1 1 Connection Setup Fe gt Wwe VO FUN
28. market They may be very different in terms of configuration and operation Here is an example of how to set up a router For details please read your router s manual First connect a computer to the router for configuration In this example the DVR s IP is set to 192 168 1 53 and its port number is 8000 The router model is PCI BLW 04G Huaral PCi 4 Lanner aie Enter the router s setup and select Static IP or PPPoE BLW 04G bRoad Lannor smart Managor OnePage Selup Host Namo NICSRVER _ Required by some 15P5 Access Corte Domain Nome PTC SERVER Required by some 15P5 e Vitsol Sone Time Zane GMT 98 00 Singapore Tawa Rwsia DIAZ Hoz T Automatically adjust clock for daylight seing changes ere ee Private IP Address MAC Address 0 40 CC 6 00 67 a P AN i 152 ies fi j aya AT TE Device IP Address 3 Peat Subnet Mask 2552552550 Deraric Rul RN Wireless MAC address 90 90CC 01 12 30 EM y SSID prada SS SSID Broadcast EE Chonnel 6 Domain us WPA mandatory pisable BAtWPASetting WAN Connection Type Sax P Select the Internet connection type you wash to use TJ MAC Addroce 94 0 CC 6E 00 60 Internet IP Address ET 7 FE FF Subnet Wosk pss 337 fas fat Gateway pT ff fa fp DNS Required fe ST ft a f A LE 1 1 PIE 157 en pen A2 2 1 WAN connection type Static IP MAC Address 00 90 CC 6E 00 68 Select the Internet
29. nfrared Remote Controller Multi language English Spanish German France Chinese LCD Panel Diagonal 7 TFT Input TTL LVDS Display Resolution 800 x 400 LCD LCD Color Resolution 262K 6 bits LCD Pixel Pitch 0 1905mm H x 0 1905mm V LCD Brightness 220 cd m Temperature 41 F 104 F 5 C 40 C Humidity Under 90 Dimension 215mm W x 178mm D x 119mm H Weight 2 6 KG w o HDD Power Switching Power DC 12V 5Amp DVR User Guide CHAPTER 1 Product Overview 1 1 Front panel overview A USB BACKUP NS a amp 1 LCD paneal e Display image 2 IR Receiver amp LED Lamps e IR Remote Controller Receiver 3 LCD monitor power switch e Power on Power off LCD monitor 4 LED Lamps e DVR Status LED LCD LCD power POWER DVR Power LED HDD HDD access LED 5 USB backup e Connect PC for firmware upgrade e Connect USB memory stick or USB HDD for backup 1 2 Back panel overview 5 ALARM GND fam CAMERA IN WE 7 ALARM D4 8 D3 l 9 ALARM 10 MD1 1 RS485D 6 ALARM 2 RS485D RELAY COM RELAY NC D2 RELAY NO AUDIO VO FUNCTION DVR User Guide 1 Audio Input Output 6 PS 2 port 1 channel Audio Enter and 1 channel Audio For PS 2 Mouse connection output 7 Power input 2 Function DC power input DC12V RS485 for direct connection to PTZ cameras 4 sensor Inputs and 1 relay output 3 ETHERNET RJ45 for network connection 4 1
30. oftware Installation 6 1 Install IRS Internet Relative Software 1 Insert software CD 2 Click Install Internet Relative Software to start the installation 3 Select a Destination Folder then click on NEXT 4 After installation process is finished The new icon on PC DESKTOP will be added Double click the icon of CD Backup Player from Desktop to run the program 99 6 2 IRS Operation Q serue O ova setup 6 2 1 IRS SETUP DVR User Guide O ID amp IP Display current ID and IP address IRS SETUP IRS Integrated Remote Station setup DVR SETUP Changes DVR setting over network VIEWER Remote monitoring over network SEARCH Search and display the recorded video BACKUP Back up the recorded video from DVR to your PC PLAYER Play the backup video in your PC AM4 file 6 EXIT Exit IRS Integrated Remote Station O IP LIST List the saved DVR IP addresses REGSTERING SITE To register a new site UPDATE To update the connection information O DELETE To delete the saved DVR site 6 SAVE Save the selected IP address OK Select and exit IRS setup O CANCEL Exit IRS setup without any change TRS SETUP IP SETUP CONNECTION 2 TEST CONNECTION ADRES n 4 LOGIN iD cancer Sl DVR User Guide REGSTERING SITE O MANUAL DDNS Select Manual to Enter IP address and port number manually Sele
31. ration is set to 10 seconds and the motion last for 3 minutes The DVR records for 3 minutes and 10 seconds SIZE Select the CELL SIZE for Blocked Area RED DEFAULT 2 cells MOTION MASK RED block Transparent block no detection mouse left click detection mouse right click Motion can trigger relay output in motion record 19 4 4 4 ALARM SETUP ALARM SETUP CHANNEL 1 INPUT DISABLE DURATION 01 SE ALL DEFAULT DEFAULT ESC Note DVR User Guide CHANNEL Select the channel to be setup INPUT Set up the Alarm input format NORMAL CLOSE when the alarm is triggered alarm output becomes open circuit NORMAL OPEN when the alarm is triggered alarm output becomes close circuit DURATION For both post alarm recording duration and the alarm output duration 1 99 seconds Alarm output can be triggered by both alarm input and video loss Alarm output can not triggered by motion detection 4 4 5 INTERVAL SETUP INTERVAL SETUP SEQUENCE SCREEN PIP SCREEN EVENT UPDATE DEFAULT 01SEC 01 SEC 600 SEC ESC SEQUENCE SCREEN Interval setup for all channels sequential full screen display Range 1 99 seconds PIP SCREEN Picture in Picture the sub picture s sequence interval setup Range 1 99 seconds EVENT UPDATE In order to avoid the same event alarm motion and video loss recorded from time to time the event happens within the EVENT UPDATE perio
32. rn on off the beeping when alarm is triggered MOTION Turn on off the beeping when motion is detected 91 4 5 EXTRNAL DEVICE EXTERNAL DEVICE TCP IP SETUP PAN TILT SETUP MOUSE SETUP AUDIO SETUP SPOT SETUP 4 5 1 TCP IP SETUP P SETUP MAC ADDRESS 00 01 02 03 04 05 DHCP MODE MANUAL IP DETECT A E 9000 IP ADDRESS 192 168 001 160 GATEWAY 192 168 001 001 SUBNET 299 239 299 000 DEFAULT ESC DVR User Guide TCP IP SETUP TCP IP configuration PANTILT SETUP Speed Dome camera related setting MOUSE SETUP Mouse sensitivity setup AUDIO SETUP AUDIO input and output volume setup SPOT SETUP SPOT monitor setup IP SETUP MAC ADDRESS Display the DVR MAC address not editable DHCP MODE Automatic auto setting for IP Port IP Address Gateway and Subnet Manual Manually configure IP Port IP Address Gateway and Subnet IP PORT IP Port setting IP ADDRESS IP address setting GATEWAY GATEWAY setting SUBNET SUBNET MASK setting 22 DDNS SETUP DDNS ENABLE ON DNS SERVER 59 124 143 151 INTERVAL D 00 H 00 M 20 REGISTER DDNS STATUS IP ADDRESS De Te IPPORT 2 0 REMAIN TIME D 00 H 00 M 00 LAST REGISTRATION DATE DEFAULT ESC DVR User Guide DDNS SETUP DDNS ENABLE Turn ON OFF the DDNS function DNS SERVER Set up DNS Server IP address Use Mouse Wheel to change the value INTERVAL Set up the interval for the DVR reports its IP
33. sk Then assign a port number to the DVR or you can use the default port number as well If you cannot enter or change any addresses check if DHCP is set to Automatic Press MENU to go back to the previous page TCP IP Setup and then enter IP SETUP Select DHCP MODE and press ENTER to switch DHCP to MANUAL The Gateway IP is your router s IP address and the Subnet Mask should match the Subnet Mask IP of your router If there is other computer connected to the same router you can find out the Subnet Mask and Gateway information from the computers From the Start Menu of computer choose Run then type cmd to open a command prompt In this command prompt type ipconfig and press ENTER The IP configuration of this computer will be displayed The DVR should have the same IP configuration of Subnet Mask and Gateway as the computer In addition the first 3 segments of the local IP Address should be the same as well For example if the local IP address for computer is 192 168 1 100 the IP address for DVR should be 192 168 1 XXX After the setup is completed and the DVR can be accessed from Internet proceed to the DDNS setup Since you may get different IP addresses from time to time setting up the DDNS service allows you to log in from the remote by using domain name instead of using the IP addresses that are constantly changing 43 DVR User Guide A2 2 Router setup There is a wide selection of routers in the
34. tting is applied to both functions Alarm Buzzer Interval BUZZER SETUP KEY BEEP F ON VIDEO LOSS F ON ALARM ACTIVE F ON MOTION DETECT r OFF Contiquration Alarm Buzzer Interval External INTERVAL SETUP 1 SWITCHING INTERVAL VALUE FULL SCREEN 1 3 PIP SCREEN 1 y TEVENTRECORDTIME 1 EVENT UPDATE TIME 10 a Update Configuration Record Configuration Record Schedule RECORD CONFIG SETUP 1 QUALITY HIGH 1 HDD MANAGEMENT 1 OVERWRITE M OFF re DVR User Guide CONFIGURATION BUZZER KEY BEEP Turn on off the beeping while any key pressed VIDEO LOSE Turn on off the beeping for video lose ALARM ACTIVE Turn on off the beeping when any alarm is triggered MOTION DETET Turn on off the beeping when motion is detected CONFIGURATION INTERVAL FULL SCREEN Full screen sequential display Interval setup Range 1 99 SEC PIP SCREEN Picture in Picture the sub picture sequential display interval setup Range 1 99 SEC EVENT UPDATE TIME Within the period of EVENT UPDATE TIME the new event will not be recorded in event list RECORD RECORD SETUP QUALITY Set up the recording quality level OVERWRITE The earliest recorded data will be overwritten when HDD full If there are two hard drives connected the overwriting starts from Master drive Configuration Record Configuration Record Schedule SCHEDULE SETUP E ALARM
35. u are not sure of the installation and setup please consult the technicians E If there s any damage to this unit or the power supply don t fix it yourself Consult the technician or your supplier distributor Package E DVR Main unit x 1 Power Supply x 1 m Power Cable x 1 E Remote Controller x 1 E Manual x 1 E Software CD x 1 m Accessories x 1 mE Battery x 2 Please contact your supplier immediately if any of the above items is missing DVR User Guide Specifications Model 4 CH H 264 Stand Alone DVR Video I O Video input 4CH VIDEO IN 1 0 VP P gt 75OHM BNC TYPE ideo Video Output 2CH Monitor SPOT Audio input HCH AUDIO I O Audio Output 1 CH __ FULL 720 H x 480 V NTSC 720 H x 576 V PAL Display Resolution 1 74 360 H x 240 V NTSC 360 H x 288 V PAL Split Screen FULL 4 split ZOOM IN OUT Yes PIP Yes Monitoring Method Sequence Resolution CIF 352x240 PAL 352x288 Record Speed INTSC 120IPS PAL 100 IPS MAX Compression H 264 Storage Device LOWEST LOW NORMAL HIGH HIGHEST Storage Device SATAHDD x1 Protocol TCP IP Remote monitoring Remote live view backup and save backup to AVI Back up method Backup via IE browser USB back up PTZ Control RS485 supports PELCO D and other protocols USB port USB 2 0 for Backup Alarm Enter 4 Alarm Enters Record Playback rae Alarm Output 1 Programmable alarm output duration Control Device _ Mouse I
36. ute all of the functions by left click on icons Increase the setup value in the Menu mode O Right button Decrease the setup value in the Menu mode Setup menu On Off 8 Mouse wheel Increase or Decrease the setup value in the Menu mode Right click mouse button will display the setup menu m S007 0707 POF 0000 SE fe 200 Right click mouse button again to hide the setup menu 10 DVR User Guide 3 4 Recording icons and status HDD Full status HDD space display Possible recording days 2007 07 07 PMO7 00 00 CA E M 3 200 Record status Emergency record RED stop record White Function 0 Emergency record mm Stop Emergency record ML eee WAIVI U J meant TAW U l 3 Recording status el Recording Red dot Under Emergency recording mode Video recorded at max speed OlStop record White dot Not recording Emergency recording Click this icon will start Emergency recording mode m Stop emergency recording Click this icon will stop Emergency recording mode back to schedule recording mode If the power is cut off unexpectedly the DVR will automatically resume its recording schedule after the power is back on Under the following circumstances the system stops recording 1 No video inputs 2 No motion is detected while the record mode is set to MOTION 3 When the record schedule is set to Not Record
Download Pdf Manuals
Related Search