INSTALLATION MANUAL DK
Contents
1. the desk Secure the desk to the machine by the fixing bracket A left and the fixing bracket B right Fixing bracket A one screw A furnished with the desk Fixing bracket B one screw B furnished with the desk A093IXC071DA 10 Slide the drawers back into the paper feed cabi net and the desk 11 Move the machine and desk to the installation site Then adjust the two adjusters at the front to let the desk sit on the floor A093IXC072DA 12 Install the Fixing Legs at two locations in the front shown in the illustration six screw C s fur nished with the desk Note When mounting the finisher at the same time do not install the fixing leg or fixing leg cover at the left front side A CAUTION CD To reduce the risk of injury due to unsta ble equipment set stabilizers before use A093IXC073DA 13 Install the fixing leg covers two pieces at two 15 Install the fixing leg covers two pieces at two locations in the front shown in the illustration locations in the rear shown in the illustration Note Note e Insert the fixing leg covers in the direction e Insert the fixing leg covers in the direction shown by arrow until they click into position shown by arrow until they click into position Insert the protruded portions of the fixing leg e Insert the protruded portions of the fixing leg covers shown by the arrows into the fix2. 3DA Screw B black 3 x 8 mm 4040IXCO46DA Screw C 4 x 8 mm 4038IXC033DA cy A093 9553 00 5 Pull out the handles Ill Installation procedures 1 Turn off the machine 2 Remove the cord clamp and unplug the power cord from the machine one screw WY ASS SSS A02EIXC008DA Holding onto the transportation handles at the right and left of the machine place the machine ees onto the desk When placing the machine use the positioning pin in the rear of the desk to align the machine correctly with the desk Note e Make available collective manpower of an appropriate size for transporting the machine e When attaching the machine as the reference fit the machine with the corner A and B of the 3 Remove protective tape from the desk A093IXE076DA 4 If the cover is installed to the position shown in the illustration remove it one screw A02EIXCO09DA A093IXCO08DA A093IXE077DA Secure the desk to the machine by the fixing bracket A left and the fixing bracket C right Fixing bracket A one screw A furnished with the desk Fixing bracket C two screw A s furnished with the desk Note The fixing bracket C can be placed upside down 9 Ha 2 WN J o A093IXE078DA Slide out the second drawer from the paper feed cabinet and the drawer from
3. DK 504 vesk INSTALLATION MANUAL Applied Machines C353 C253 C203 C353P COLOR MFP Color B amp W 35 ppm 35 ppm 25 ppm 25 ppm 20 ppm 20 ppm COLOR PRT Color B amp W 35 ppm 35 ppm Product Code A02E Note Lifting the machine in an awkward position or transporting it in a poorly balanced position could Installation result in personal injury When transporting the manual machine assign an adequate number of persons to the job and ensure that each person can take a good position of not being excessively loaded 49801XC019DA mass approx 20 kg 44 Ib Accessory parts WARNING No Name After unpacking be sure to get rid of the D packaging materials and keep them out of Name 1 Fixing leg the reach of children Putting the head in the plastic bag involves danger of suffocation Note When removing the desk from its shipping carton do not hold onto the reinforcement bracket as a personal injury or a deformed frame could result 4348U020AB Fixing leg cover Reinforcement bracket 4348U099AB Fixing bracket A 4658U021AA Fixing bracket B A093IXC003DA A093IXE075DA Fixing bracket C Il When installing to C353P A093IXCOOADA This manual provides the illustration of the machine Screw A used as MFP However the same installation proce black dure is used for C353P 4 x 8 mm 4038IXC03
4. ing leg covers shown by the arrows into the fixing leg A093IXE062DA A093IXC074DA 14 Install the fixing legs at two locations in the rear 16 Plug the power cord into the machine and put shown in the illustration six screw C s furnished the cord clamp that has been removed in step 2 through the power cord to install it one screw with the desk CAUTION To reduce the risk of injury due to unsta ble equipment set stabilizers before use WON WON A02EIXE097DA A093IXE061DA
Download Pdf Manuals
Related Search