Home

GATE / MX2 USER MANUAL

1. GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 11 Print functions The MX2 software allows the user to print what is displayed in the analysis window the track window and the report window at any time In order to access the print functions click on the heading File on the main menu EET Wa demo_sxp a File Analisis Track View Options 7 New project Ctrl rey re TE Open project Ctrl 0 r IK jo ay pa Save project Ctrl 5 Save Project ag Close project a ae Update data folders CTAL G Trim session Convert SA file Impar rh AF Export Frint setup Pin 5 Print preview ee Mall HT I J J ly i ii j By clicking on the heading Print settings on the context menu which is opened the settings window is displayed From this window it is possible to select the elements to print and if necessary specify a title to insert at the top of the sheet Exit Print Setup Print Configuration Analysis Tracks Reports Select Title Font Title Load Loga Load Client Loga C Vertical Horizontal OF Annulla 7 GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved In the first tab on the window Print configuration it is possible to select a title which will be shown on each of the pri
2. mi l M iil fi j aie Wty Il Y Ral ue If the finish line and split points have been added to the track they will be visible in the Track Bar as grey lines which divide the track FINISH LINE SPLIT POINTS GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 2 Creating and managing projects The MX2 software uses project files to manage the set of data and settings used The session loaded the channels used and the display and track settings are specified in these files Through the project files it is possible to save the program mode in order to recall it later on This allows the user to ensure that the working environment used at the moment when the project was saved is always available The demonstration project loaded automatically the first time the MX2 software is run can be closed by clicking on the heading Close project from the File menu In this way the program no longer has an active project therefore the majority of the available options are disabled At this point it is possible to create a new project or alternatively open a project saved previously by clicking on the headings New project or Open project present in the File menu We ge gr ga j BA GN E he G J Save project Ctrl S Save project as Close project p Update data folders CTRL G d sceleration dt 00 18 80 d1
3. iyi POINT TO POINT MEASUREMENT IN METRES Oe GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 9 Track library The track library contains the list of all the courses available When it is accessed the user can operate on these courses setting the finish lines and the points where the split times are measured dividing the path into segments and selecting the course to apply to the session in use In order to display the Track Library Management window simply click on the corresponding button on the left hand navigation bar The left hand side of the Track Library Management window shows a graphic representation of the course with the finish line split points and segments if set See the following paragraphs for further information about these elements On the right hand side of the window on the other hand there is a list of the courses available and the buttons which allow the user to perform some simple operations on them for example copy create and delete These operations are also discussed in more detail in the following paragraphs Map rotation deg GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved Create new Create copy Delete Manage track library x Available tracks Adria 25p Ermo Jerez Nogaroll Vic Adria Calafat Jesolo OttobianoQls Albacete Cartagena L
4. M NO PROPERTIES Crea nuovo Apri da disco Apri da dispositive Chiudi setup attivo A amp E Rinomina al ra canale Copia canale This will synchronize the time on the device with the time on the computer to which it is connected Please note Remember that when some GET MD3 and MD4 series data acquisition products are synchronized with the time of the computer go into manual date time update mode SET DATE option Therefore check that this mode corresponds to your needs 5 3 4 Track library synchronization except for MD5W To synchronize the track library of the device with your computer click on Synchronize tracks located on the main toolbar or select Synchronize track library on the Setup menu File Setup Watch Dispositivo Synch ronize track E Invia setup a dispositive aA library lac Sincronizza orario d hri E ICON Sincronizza libreria piste Crea nuove Apri da disco Apri da dispositive Chiudi setup attivo amp Rinomina Ealibra canale Copia canale This will copy the track library from the computer to the device GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 5 3 5 Track library synchronization with MD5W To synchronize the track library of the MD5W with that of the computer proceed as follows e Ensure that the ANT key is properly inserted in the PC e Open the GATE Setup Manager e Click on th
5. GATE MX2 USER MANUAL By Athena Evolution Gate User Manual MX2 revision 03 Rel 20090128 Copyright 2008 GET by Athena Evolution All rights reserved Neither the content of this document nor any part of it may be printed transferred distributed or memorised in any form without the written consent of GET by Athena Evolution s r l GET reserves the right to amend the content of this manual without notice 1 oA TEN RECUR EMENT ements rer ee eee 6 2 DSTA IN aise cytes censure E E E T eueucusumessaesececn inc eseaseasetonene 6 2AM AUS Aver WS CANA OU Nestea cases cee geese Sec E E aaeaid seine antenna anne Sem secgeesa sane een saes eae acces 9 22 SONU CONS arses arses nae E trea empnrna teeta datbneae E E susmsnetecadamaneeent 9 3 GATE ees tare so sae capita cron etcaccee epnne E E ia aeee beets se se an aroagsaaceanede R 11 4 DOWNEOAD MANAGER sacs cats te se ese dg E EEE E a E eeedo ees 12 4 1 Downloading sessions from GET data logger ccccseccceeeeneeeeeeeeceeeeeeeeseeeeeeesueeeeeeeseeeseueeseeeseneeseeesaees 12 4 2 Download Manager Options cccccsecccceeecceeeeeseeeeceeeeeeeeesseeeeseueesseeeeseeeeseeeeeseaeeseaeesseeesneessueeeseeeetags 13 ALAN Downoad WOGAINCS cesera E O E 13 4 2 2 Custom directory for session download ccceccseeceeeeeceeeeeeeneeeceeeceueeseesseeesaeesueesueeseeesneeseeeseeeeseeesenes 14 A2 oa PEOC MOE eee ee ene e ee ee ee eee 15 4 2 4 Data analysis opening mode e cisccc
6. Serial HRR CAN channels FUL Input Capture channels One click on the None value disables the acquisition on the channel while one click on a different value sets the frequency to use for acquisition GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 5 2 3 Channel properties Other information can be entered in the channel properties screen such as name of the channel the number of decimal places and the units of measurement To modify these properties click on the desired field and then press the buf when available to view the choice of items to select or type it in directly from the keyboard 5 2 4 How to copy channel properties In special circumstances it may be useful to copy the property settings from one channel to another To copy select the source channel and then click on Copy channel in the Setup menu A dialog box will appear that allows you to select the target channel where you want to apply the properties of the source channel i Setup Manager File Watch Dispositivo Invia setup a dispositive Sincronizza oraria ee Decimal places None B Crea nuove Logging rate 4 Hz am da secih ene GEAR Apri da dispositive i Unit Chiudi setup attiva Rinomina Clona canale Calibra canale Copia le proprita in gree GEAR a AL Switch channels JAGPS channels FLL Input Capture channels T Nomi sequenziali A
7. The Update List button updates the list of the devices connected once one or more sessions have been selected it will be possible to press the Download button in order to download them onto the PC In both automatic mode and manual mode the download bar shows the current progress of session download The estimated memory duration gives an estimation of how many minutes of acquisition it is possible to do with the current setup and the current state of occupation of the memory of the device WARNING to download recorded session with MD5W CHRONO please refer to Data Download Kit 00080003 user manual GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 4 2 2 Custom directory for session download The first time Gate is installed when a new session is downloaded it is automatically saved in the Windows Documents folder The full path is as follows Current User Documents Get Device Name Date yyyymmdd Session name sxd If necessary it is possible to modify the directory where the sessions are saved by following this procedure e Access the Gate Download Manager options Select the heading Download File from the options on the left Certain properties appear on the right select yes in the box near the heading Use custom download path Click on the heading Custom download path and select the desired destination folder for session download Root Directory CrUse
8. Watch is a tool that lets you view the status of the GET data acquisition channels graphically To open the Watch window click on the corresponding button located on the left hand side toolbar in the Setup Manager program Watch ICON To return to the previous display click on the Setup icon located in the same side toolbar Setup ICON The Watch dialog box has a toolbar at the top with functions to start or stop Watch filter the channels displayed to search among the channels and set tabs cs ZERO CHANNEL SETTING Watch toolbar BUTTON ie Setup Manager Bie Setup Watch Dispositivo 15 x M RR Math I fy Aggiungi Tab Salva Profilo Q Imposta Z Offset gs Offset Offset Offset Offset calibra 0 000000 Calibra 0 Calibra 0 Calibra 0 Calibra 0 Calibra 0 0 Calibra Calibra CALIBRATION CHANNELS AVAILABLE LIST BUTTONS T Offset jigs Offset Me Offset Oset The list of channels available in the setup used is located under the toolbar 5 4 1 Quick search te The item Quick search found in the main toolbar of the Watch dialog box allows you to do a quick search of channels available in the lower part of the dialog box When you enter the whole or partial name of a channel in the appropriate field the list below is updated showing only channels with the name included in the text entered i Setup Manager Fle Se
9. zi oa D P in Gi G1 ee cot a oi 4 7 m H E oi c G D Mm T CHANNEL SAMPLING FREQUENCY COLUMN COLOUR FEATURE MIN AND MAX COLUMNS COLUMN Each channel is identified by a progressive number a name and an icon which refers to the type of channel The next selection controls indicated with Visible and Over enable or disable the display of channel graphs in the analysis window or overview window respectively while the Scale checkbox displays or hides the scale of channel values along the vertical axis of the analysis window The next control Color allows the user to assign a colour to the channel graph Simply click on the control and then on the down arrow in order to open the colour palette and choose the colour required Furthermore for each channel it is possible to read the minimum and maximum values in the Min and Max columns within the session selected and in the Hertz column the frequency at which it was sampled by the instrument GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 4 1 Ordering by name or by number By clicking on the column showing the number or name of the channel the list is automatically ordered by number or name respectively As the default setting the list has ordering by number nevertheless ordering by name may be useful if many channels are available for the session in use ala Te poney s DC
10. Setup will create the program s shortcuts in the following Start Menu folder To continue click Next IF pou would like to select a different folder click Browse Browse lt Back Cancel GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved Select where the connection icon to the Gate MX2 is to be positioned Continue by clicking Next if Setup GATE Select Additional Tasks Which additional tasks should be performed Select the additional tasks you would like Setup to perform while installing GATE then click Next Additional icons i Create a Quick Launch icon lt Back Cancel The summary screen below shows all the selections made until this point it is possible to go back to the previous pages in order to make any changes by clicking on Back To continue installation click on Install Setup GATE Ready to Install Setup i now ready to begin installing GATE on your computer Click Install to continue with the installation or click Back if you want to review or change any settings Destination location C Program FilessGATE Start Menu folder GATE Additional tasks Additional icons Create a desktop icon Create a Quick Launch icon ov Cancel During the installation the files being copied and the installation progress bar are displayed wait until the process has been completed GATE user manual rev 03
11. allows the user to modify the position and dimensions of the overview window e Unlock track bar allows the user to modify the position and dimensions of the track window GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved The second tab Colours and characters allows the user to set the colour and characters used by the MX2 software x Setup Analysis options Colors and fonts Scale font Table font Change Map tont Change Setup font Change Background color Foreground color os Grid color m Finish line color i Color manager Change OF Annulla F 6 8 8 Course window The default position of the course window is in the bottom right hand corner of the program window In this area the image of the course associated with the session in use is displayed By pressing the I button on the main toolbar it is possible to enter trajectory analysis mode This function allows the user to compare the trajectories of laps selected on the Browser Bar inside the course window Track Bar if only one lap has been selected a single line will be displayed GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved When the function is not activated all the trajectories of the loaded session are superimposed on each other In order to display the difference between the laps correctly it may be necessary to
12. 4861 52 d2 4282 62 dd 578 90 v1 49 w2 104 Trim session Convert SR file Export 7 Print setup CTRL S 2 n amp Print Ctrl P i g i I y Print preview j d i i j Nag j f el f y WW ner Head lw bal ld ha v By clicking on New project the software warns the user that he she is abandoning the open project confirm the operation by clicking YES requesting a position and a name for the new project which is being created After specifying a valid position and name an empty working space is created into which it is possible to load the sessions and apply the settings required le Analysis Track View Options Oe 7 7 7x 70 Sree 9 TEENETE It is possible to save the state of the project in use at any time by clicking on the heading Save project from the File menu If it is necessary to specify a different name from the one in use simply click on the heading Save project as still from the same menu In this way a new position and a new name to give to the file will be requested GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 3 Opening the sessions Once a new project has been created or an existing project opened it is possible to add laps by selecting the sessions to be used In order to select a session from those which are available it is necessary to open the browser bar from th
13. BUTTON SELECTION BUTTON Analysis Software Download Manager Setup Manager LEIR Analysis Download Setup The following buttons are present in the GATE window e Analysis Software by clicking Analysis Software there appears a list of softwares which can be used to analyse the data downloaded from the GET data acquisition devices In the current version of GATE it is possible to use MX2 for this purpose see chapter 6 0 of this manual e Download Manager by clicking Download Manager it is possible to access the section related to downloading the data acquired by the GET instrument The Download Manager can be configured according to specific user requirements see chapter 4 0 of this manual e Setup Manager by clicking Setup Manager it is possible to access the software which allows the configuration of your GET data acquisition device see chapter 5 0 of this manual GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 4 DOWNLOAD MANAGER wn The download manager allows the user to download the sessions acquired by the control unit onto the PC There are various download settings which allow the user to vary the ways in which the files are downloaded the analysis software is opened and internal control unit memory deletion is managed on the basis of individual requirements In order to access the Download Manager proceed as follows e Open Gate e Click o
14. CIN a S UID eg tier n A EEE EEE OEE E am E E EEE 24 5 1 4 Renaming the active SCtup ccccccecceccsseecseceeeeeeeneeeeeeesaeeneeesseeceeeeeeeeeeneeesseeseetaeeeeeeseessenteeenseesseesanenass 25 De Te OSIM ME ACV SCUD aerae a E E 25 5 1 6 Modify active setup properties cccccccsececsscceeeeceeeeeeeeceeeceeeesseeeseeeseueesaeeseeeeseeenseeeeaeesseeesaeenseeeneeesaeeeges 26 5 2 Ope ratons on channels sanencescwniecqusananchouacduiceoarmutwadenitdinadtaacesaicnsaidedansodndrmsnidacd nie aa Ea TEEN eaS EEDAN gni 26 2 SC AT ANES e E E 27 52 2 Channelin acguisition Settings sis ciuccem atecsinsin snesegnctiar cece a e aai aa aaa 27 5 2 3 Channel DOpErniCS seisseto dri saar EErEE EEEE a ar EIE OER an SEE 28 5 2 4 Howto CODY channel PrOpGNIGS siesena e E EE E E TaN 28 De G T a E E E E 28 5 3 COMMUNICATION with devices ccceecccceececeeeecseeeeceeeecaeeeaeeeeeueesseeesseeeeseusesseeeeseaeeseaeeeseeeseneessaeeeseneenens 29 591 sending ano TECeIVING INC SCID crecaicicsscecquscdiy sad a a EE SR 29 93 9 4 Sending ING aciyo CONMIGUT aO csrsyan EEEa a naaa aE 29 S99 Mme S VIN MOTI Za NOUN sssrin nrisidr o nEn a PNA EEEN R ORE NA SAE SNA Erap N ERIE SAES N 30 5 3 4 Track library synchronization except for MDSW cccccceccceceeeeeeeeeeeeeeeeeeeeseeeseeesueeeeeeseesaeeseeeseeeneeenaes 30 5 3 5 Track library synchronization with MDW ccceccceeeceeeeeeeeeeeseeeseeeeeeeeeesaeeceeeseeeseeeeeeeseeeeeseeeeeeeneeesaes 31 5
15. Ce BG E G w Ww EAZ 2t 24x JU SF Pt Fam 7 Engine Speed Acceleration 3 1 01 15 434 Lap 4 01 15 467 2 00 40 01 20 02 00 02 4 04 40 05 20 06 00 06 40 The measurement mode causes the channel value table to appear to the right of the analysis window see description in chapter 6 7 7 of this manual GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 7 3 Manual alignment If more that one lap has been added to the project it is possible to move an individual lap in order to align it with the others as required In order to do this it is necessary to use manual alignment which can be activated from the third button on the navigation bar or with the corresponding heading from the context menu which can be displayed with a right click on the analysis window This mode is only available in the position mode of the analysis window 5 File Analisi Pista Visualizza Opzioni al Ra FA jF G XK Zo Ge v Cia O ne as E 3 1 MANUAL ALIGNMENT BUTTON i MANUAL ALIGNMENT BUTTON IN THE CONTEXT MENU w Show scales w Show tables w Show linear map SHOW rhe ele renee cUra 03 00 Once manual alignment has been activated it is possible to move the graphs of the lap selected by simply clicking on the analysis window and dragging the mouse horizontally After aligning the lap click once more on the navigation bar button
16. Copyright 2008 GET by Athena Evolution srl All rights reserved 2 1 USB driver installation Once installation has been completed leaving the Install USB drivers box ticked and clicking on Finish the USB drivers necessary for the PC to communicate with the GET acquirers are installed At this point software installation is complete ie Setup GATE El E Completing the GATE Setup Wizard Setup has finished installing GATE on your computer The application may be launched by selecting the installed icons Click Finish to exit Setup M Install USB drivers C Solve USB conflicts PLEASE NOTE When installing the Ant drivers the program will request to confirm the installation of these by opening another dialog box Confirm installation by clicking on the Install button and wait for installation to be completed WARNING The Windows operating system may try to block the ANT driver installation therefore watch out for any windows also reduced to icons in the Windows bar that may block installation The Ant driver creates a virtual serial port COM inside the PC when the USB key is inserted The address can be seen in the Device Management box of Windows 2 2 Solving USB conflicts In order to solve any USB conflicts once installation has been completed it is possible to select the heading Solve USB conflicts Ensure that the heading Install USB drivers has not been selected but only Solve USB Conflicts in thi
17. Gate Mx2 img d 1 G20 GaN THe 00 6 7 5 Resetting the alignments The last heading in the context menu of the analysis window Reset alignments allows the user to erase all the alignments introduced previously in order to reset each graph to its original position GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 7 6 Positioning and moving the cursor Having entered the measurement mode a white vertical cursor appears automatically indicating the position on which the measurements are being carried out MX2 demo sxp _ BETES File Analisi Pista Visualizza Opzioni lej x A ee 1g Vi ya a BC BCS ea DO lE lx FTAA i Eee 3 1 3 2 POSITION CURSOR 15 434 Lap 4 01 15 467 00 40 01 20 02 00 In order to move the cursor along the acquisition it is possible to use the following methods e Click on any point of the graphs e Click on any point of the graphs and hold down the left hand mouse button to drag the cursor to the left and to the right Use the left and right arrows on the keyboard Hold down CTRL and use the left and right arrows on the keyboard to move the cursor more quickly GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 7 7 Cursor values values table Entering in measurement mode a table displaying the values of the graphs in the intersection positio
18. ON SEE CHAPTER 4 2 9 GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 4 2 Download Manager Options 4 2 1 Download Modalities The first time the software is installed the mode set for downloading is automatic This means that when Gate is running and a data acquisition device is connected to the PC the recorded sessions will automatically be downloaded in order to allow the user to analyse the contents In order to modify this option proceed as follows e Access the Gate Download Manager options e Select the heading Download File from the options on the left e Certain properties appear on the right for the heading Download Modality the option Automatic will be selected Select the option Manual Download Manager i x Options Root Directory Use custom dow Custom downlo Download Modality Erase after dow After download File Format Users ValerioF Documents Mo C Users ValerioF Desktop Manual na Open last session if Mee is m Driver Mame Session times Downloe These options are about downloading Files From devices Estimat In this way when a device is connected to the PC the files will not be downloaded automatically In order to import the files it will be possible to use the Download Manager display the files present in the memory of each device connected and select which sessions are to be downloaded onto the PC
19. a ETN ie TE sasa IT PEE saros I 6 4 2 Quick search a The Quick Search control is available in the top left hand corner of the channels window and allows the user to search quickly through the channels available in the list below Inserting the name of a channel or part of the name updates the list automatically leaving only those channels with the specified name visible QUICK SEARCH CHANNEL N COLUMN CHANNEL NAME COLUMN B Fie Analisi Pista Visualizza Dpzieni 7 I ACANA ALY 8 a Channels Bar Quick gta UL Analogl A Sef lt j GPJ a Ca AR Mah fx Engine e Soceleration Channel Visible Scale Over Color z Downe Up _ npt aa x Acceleration a 0 0 Acceleratior f Scocelerstinn F B r B amp cceleratine GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 4 3 Channel display filter The controls next to the Quick Search control allow the user to filter the channels based on their type By selecting one or more headings from those available Digital Analog Sys Gps Can Math the list is updated automatically leaving only those channels belonging to the categories specified visible CH FILTERS E File Analisi Pista Visualizza Opzioni 2 IEAI lee Pa it Channels Bar iw Quick Search Digital UL Anato Digital UL ie Sys lt i a re Cant RR Math fx Accelerator Socelera
20. abd dade E A E a SE AET 60 6 A Resetng the adlgimMmeM S siswsienvncc r oe aa a aa a A E 60 6 7 6 Positioning and MOVING INe CUISON ssaa a aa r a a aa 61 Pr Gursor values Values Table niare E E TE E nee 62 6 7 6 MElerencoCUrSON oaee a a r E A 63 69 DISDIAY ODUONS oeiee A a a a AE 64 6 8 1 Moving between session IADS cccceccceeeceecceeeceeeesseeeeececeueeseeeseeeeseeeseeeseaeessuessaeeseeeseeeseeesaueeneesaeeenaes 64 68 2 Selling the loaded laps urene E N a a a ra a 64 6 6 3 Companng Ne laps raai a a r a ubhenibanaess 65 0S4 ZOOMON TNE ANALYSIS WINDOW measina aa R E A lac eran e T E EE 65 0 8597 SeN ING X AXIS orni E a E E deans a E 67 6 8 6 Locking the visualization scale between tabS ccccccccecceeeeeee seca eeeeeeeeeeseeeseeeaeeeseeseeeeeeseeeseeeseeegeeneees 67 6 8 7 Changing thevisualizauon SeniNgS ceni naea a a a cantbel adsWeigeneeanstasbedieuuee 68 08 6 COUE WINGOW caai e a ar a E E 69 6 8 9 Zoom on the course WINDOW is i08 avevaneeniansatcouscsasdonuasenentunwel owes hen xdoaucavendaveaseceaet at vaeeteenaeibesais ou 70 Ors TORUP TOON r tsatitren deeat anes se E aalaaat E ona mane E E set aa cedc eka remade nsoateaannranoenees 71 09 PACK NOFA ees n E e E nse a E 72 GOT Selecting INS COUT SCS ticetaren aac iiueyartehstercaeduatta acrestettte ih a aubediivaitiedisdalidenholenaceuigniieeans 73 6 9 2 Applying the course to the loaded SESSIONS ccccsecceececeececececaeeeseeeceueeceesueeeaeesseeesacess
21. different ways e By pressing the shift key on the keyboard and by clicking on any point of the analysis window e Pressing R on the keyboard the reference cursor appears in the position of the mouse pointer Pressing R on the keyboard again hides the reference cursor By selecting the heading show hide second cursor from the context menu in the analysis window Repeating the operation hides the reference cursor In order to move the reference cursor all the methods mentioned for moving the main cursor are valid but in addition it is necessary to hold down the shift button on the keyboard MX2 demo sxp File Analysis Track View Options ox Ba OH DOD 0A R a G G GY w w za Z ot j 7x wo Gs P PL Bx iJ 7 Engin Sospension Speed Acceleration r TPS t4 04 15 74 t2 04 24 41 dt 00 08 67 d1 8151 17 d2 8403 72eeddn252 55 w1i 1 w2 3 p REFERENCE CURSOR 7 POSITION CURSOR i t F SHOW HIDE REFERENCE i iog E fi CURSOR r I v Show tables ANANA AAS v Show linear map a E Show hide reference cursor R Manual alignment Align to GPS position Reset alignments After activating the reference cursor an additional bar appears at the top of the analysis window This bar shows the data regarding time distance values of the channel selected in the values table and difference delta between the two cursors SELECTED CHANNEL POSITION CURSOR CHANNEL VALUE ON DISTA
22. first control at the top of the track library From this control it is possible to select which element to add or modify in the graphic representation of the course below Manage track library Bria Calafat Cartagena Castelletto Cellole Estoril Franciac franciacorl Franciacorta franciacortals GET GETI Hungara Imala Interlagos lzam0 Jerez GF Barcellona Binetto Jerez Jesolol7 Ledenoni Magione Malagrotta Misano GP Mizana SBE Misano MisanaQ Montagnana Montmelo Monza SBE Monza Mostl Mugello GP Mugello SBK Mugello Map rotation deg fo A ____ Create new Create copy Nogarol OttobianoQe Pannoniale Paul Ricard Pomposa Port Biol Port Giorgio Fijekall Silverstone Siracuza Valencia Gp Valencia SBE Valencia Vallelunga CI Vallelunga SBE Vallelunga Varanolls gt Delete Apply Once the heading Finish line has been selected in the drop down control in the top left hand corner it is possible to define the corresponding position on the course FL by clicking on the image of the track and dragging the mouse holding down the left hand button drawing a line with the required dimensions When the mouse button is released the finish line is positioned permanently Ensure that the finish line intersects the course otherwise the laps cannot be calculated It is advisable to create a stretch which is perpendicular to the direction of travel and has a sui
23. in the overview window By clicking on each of these tabs the corresponding lap will be loaded and the program interface will be updated with the corresponding data THA LAP TAB LAP TAB LAP CURRENTLY DISPLAYED IN THE ANALYSIS WINDOW 00 50 03 20 04 10 05 00 05 50 OG 40 GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 4 Displaying the channels After adding laps to the project it is possible to select the channels to be displayed in the analysis window In order to do this it is necessary to open the channels window by clicking on the corresponding symbol on the left hand navigation bar The first time the program is run the window is opened in the minimised format and therefore it is necessary to expand it by clicking on the arrow positioned in the top right hand corner of the window itself me Digital aX 2 K Sospension z E wl F Channels Bar ee iad EXPANSION BUTTON 6 fx Speed Shack_f O a3 Speed Fork_F z a JAA FORCELLA ule LAP l2 ion RPM pesos ua A pe Fp Vv 00 02 00 02 14 2 NSAT E The channels window is composed of two parts The top part offers options regarding searching and filtering the creation of mathematical channels and tab control These functions will be covered in detail in later paragraphs The bottom of the window on the other hand offers a list of available channels for the session selected GATE use
24. made Once the window has been closed with the Close button all the open sessions will use the new course Aao e a Create new Create copy Delete Map rotation deg jo A w 6 9 3 Creating deleting and copying the courses Using the track library it is possible to perform some simple operations on the courses in the list If the user wishes to modify the course in use without losing the original settings for example it is possible to create a new version of the course by pressing the Create New button In this way a new track with the name new_track will be created in the Tracks Present list This track will be a version with no finish line split points or segments of the course in use If on the other hand the user wishes to make a copy of an existing track simply select and press the Create Copy button The user will be required to specify a name for the new track Finally in order to delete a track simply select it and press the Delete button The track will be deleted from the track list and will be erased from the computer hard drive Create new Create copy Delete Map rotation deg jo soy GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 9 4 Setting the finish line As a session may be divided into laps it is necessary for the associated track to have a finish line In order to set a finish line on a previously selected track click on the
25. not assigned a colour and therefore remain blue identify a straight line It is important to note that for correct operation of the reports on the segments the finish line must be positioned on a blue stretch In order to delete a segment click on one of the ends of a stretch which marks it off then move it out of the line of the course so that it does not intersect it The segment will be deleted automatically In order to delete all the segments of the course ensure that the heading Segments is active in the control in the top left hand corner then press the Eraser button GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 9 7 Rotating and zooming in on the selected course In order to insert the finish line and split points precisely position them on the course then use the Zoom in button to enlarge the corresponding part of the track P S It is possible to correct the position of the stretch which has just been inserted if an enlargement of the part of the track on which the user is operating is available Use the Zoom out button to go back to the original dimensions The course rotation function allows the user to rotate the selected course by between O and 360 degrees in order to aid insertion of the finish line split points and segments A E gt Create new Create copy Delete Map rotation deg 0 roy tes Last of all the left and right arrow b
26. or on the heading on the context menu of the analysis window which can be activated with a right click above the channel graphs area to exit manual alignment mode GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 7 4 Alignment to a GPS point Alignment to a GPS point allows the user to align all the open laps in the project to a GPS point indicated on the selected lap In order to choose the GPS point to use for alignment it is first necessary to enter measuring mode by double clicking on the analysis window or by pressing the spacebar on the keyboard When the cursor is displayed on the window move it to the required point then open the context menu of the analysis window by right clicking in the channel graph area and select the heading Align to GPS position In this way all the laps will be aligned to the GPS point indicated by the cursor ALIGN TO GPS CONTEXT MENU ANALYSIS WINDOW IN POSITION MEASURE MODE MX2 demo sxp _ a File Analisi Pista Wisualizza Opzioni SEES ZA A 18 xi TARSA OQI C i Olz CQ CP lt A And lisa ZA Vd Vad 209 Vall Kad y o ee eC NN T 3 1 3 2 v Show scales v Show tables v Show linear map Show hide reference cursor A 15 434 Lap 4 01 15 467 04 40 05 20 06 00 06 4 aU cad Se E gt 7 T Start mA 2 y SANUOVOARCHIVIOS IES MX2 demo sxp CAUsers ValerioF Docu Wl Manuale
27. the fields marked with X to values set by the user in the fields marked with Y This combination of values defines that calibration of the channel By clicking on an X field and then clicking the Capture button on the top right corner of the Calibration dialog box the current value of the channel Y field is associated to the previously selected X field WARNING The direct acquisition procedure described above must be made with the GET data acquisition connected to a PC lf there is no data acquisition device connected to a computer you can enter the values in the X and Y fields manually using the keyboard NOTE consult the instruction booklet of the sensor being calibrated to know the XY values to enter in the appropriate fields e The Show in volts option if enabled shows the voltage of the channel expressed in volts 5 4 6 Setting the zero You can use the Set zero button to set the initial value for the selected channel The button can be selected only after you start Watch on the relevant channel and obviously connect your GET data acquisition to a computer 5 4 7 Offset settings You can use the offset the button to specify a value to be added or subtracted to the value read from the selected channel Use negative values to subtract the offset from the channel and positive values to add offset confirm the data entered with the OK button imposta offset X m Annulla GATE user manual rev 03 Copyright 2008 GE
28. to Data Download Kit 00080003 user manual GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 5 SETUP MANAGER Setup Manager is the software used to manage the setup of GET devices This allows you to set up the channels in acquisition and to communicate with the device to save or recover the configurations used jo Setup Manager File Setup Watch Device amp SAHA via Active Setup Setup Location NO PROPERTIES 1 Setup management oe Setup is a configuration file that tells the GET devices which channels to use during the acquisition phase what frequency to collect the data and other settings described in detail in the paragraphs the follow If the program is started from Gate no setup is loaded but if you start the program from Mx2 see chapter 6 0 and seq of this manual the setup associated with the session in use will open automatically GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 5 1 1 Creating a new setup To create a new setup just click on the New Setup button on the toolbar of the program or select Create new from the Setup menu located on the menu bar of the program SETUP MENU Sees ie Setup Manager File Watch Device OF te 2 ae 2a tt wD Od OCR a I a i NEW SETUP BUTTON A new window will open here you can choose the type of device that will use the setup tha
29. will appear the user is requested to specify which track he she actually wants to associate with the selected lap Once the course to be used has been selected simply click on OK in the window It is also possible to click on Create new in the window in order to create a new course useful if the track is not present in the data library Select track Current loaded track Mugello Current data File demo SELECTED COURSE OK BUTTON CREATE NEW TRACK BUTTON aD GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved For each heading the list containing all the laps added to the project summarises the information regarding the lap itself and the corresponding session in order to identify all the laps listed with precision and speed z tark Fg F C Documents and Settings vale DocumentiiGetiDemoidemo sxd o back_reg File name Track Date Time Car Dri Lap Laptime i Get demo 23 08 2007 12 25 00 06 211 Demo 01 17 290 i tracklib A inaani 01 15 907 lavoro 01 15 466 O115 434 5 Musica G My Games LAPS ADDED TO THE 01 15 455 My PSPS Files PROJECT F 5B nero 01 30 734 Nerovision 00 17 711 5 Presentazioni Corel telefono Ulead Burn Now H Menu Avvio Preferiti Isi Is nie j Magione 23 08 2007 12 25 Lap 0 00 08 21 je Magione 23 08 2007 12 25 Lap 01 15 907 iw g Ref For each lap added to the project a tab is also created
30. 0 0 000 Diff Time 7 1000 None Offset 3 fx Dit Space C loo loo Dit Spase 1000 None offset 4 fx SpeedFok O loo ooo SpeedFok 1000 f None Dtset 5 fx Speed Shock Im oo loo Speed Shock 4 000 l None Offset 6 a Speed Shock tT i loo fao Speed Shock_f 1000 Keria Offset CHANNEL REFERENCE LINES INSERTION WINDOW 50 100 AINA Aaya E T Am LLS CG is E E OOOO OOOO Iolo 7 Fe SpeedFokt TO looo 0 00 a Sp Channel reference 8 AA FORCELLA O 7 138 Tac fs almono IA az e fa References fo g 10 4 LAMBDA 11 06 1842 Jar E Reference 2 04 11 lt j LAP 121 RPM lo 23219 lie un Reference 3 13 TPs 19 110 lar 14 Ja NSAT 15 LATITUDE 16 3 LONGITUDE 17 Ja ANTALT 18 2 SPEEDG 19 2 TMGDEG 20 fx Lan time 12 12 L oD 247 2 278 8 ANTALT Offset lo 230 SOGKM Offset lo 359 TMGDEG Offset 00 00 000 01 30 716 Laptime l Offset 0 0 2452 5 Lapdistance Zz Offset _ fom fom cs fof fff Fo fff Fo iea AISA DIA AAA yA 121 fix Lap distance The reference values allow the user to have horizontal lines on the analysis window on a level with the assigned values These lines are mainly used as a reference when studying the channel graphs like for example a lambda probe it is possible to set the ideal lambda value and compare i
31. 2 Y2 osta 13 LAP 0 3 m losta 14 NSAT E 0 ETE 15 DISTANCE a 0 x4 v4 ae 16 BEACONUTM 0 x5 5 josta 17 TH20 E 0 000000 z ve sta 18 TAIR 0 000000 asta 19 RPMECU 0 000000 x v osta 20 SPDT 0 000000 x8 y8 josta asta 21 ERR ECU 0 v 9 asta 22 SER6 L 0 asta 23 SER7 E 0 x10 Y10 losta 24 SERS 0 asta 25 SERS 0 osta OK Annulla 26 SER10 0 ok Amua losta xi n ta 27 SFR11 4 GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved e Type of calibration allows you to choose the type of calibration to use in the channel selected A list of types of calibration appears when you click on the button with the left button of the mouse button Make the choice based on the type of channel you are working on e g for potentiometer sensors choose Linear The following types of calibration are available Type of calibration None No calibration The channel is not calibrated Linear It is a linear type of channel and only the two values X and Y are needed to define the characteristic The channel provides a stepped signal Up to ten levels can be defined Battery Voltage RPM Spark Channel is connected to a rom sensor on the spark plug cable enter the Coeff and Offset values based on your engine GEAR Channel related to the gear ratio number entered Enter the X speed and Y rmp values to identify the gear entered in the vehicle The value o
32. 3 6 Firmware update only for MDSW ccccccceecceeeeseeeeseeeceeeeeeeeseeeeeeeesee eee eeseeeesaeeseeeeeaeesueeseeeseeeeneeesaeeeges 31 SE E 2 9 ae ene omnes EEA E E E ee eee eee eee eee 32 AT 1 61 e E eee ee eee ee eee 32 oe a 6 e016 eo ee ee ee eee ere eee eee 33 A SAN VV ANC cect reece gees N access seesaw etn ees anaace apace coe sega eunecu sx eeequancdecoemeecse acca anentos 33 PAA SLO VV UGE nc aiesnnile catmsyra thins Sieanna E E ean wa Ube oacotee dncminded dune baba Eni amueaaaeEaeeaeanbuathstinien 33 oe ho a O72 6 211 0 anne ere eee ee eee en ee eee ne ee eee ee eee 34 AG SUING NS Ze IO a a ten cinata cae tenurveupt taeana in eas aurea Hie nant or emeeemiecon ualcas E E E eaten toutes 35 DH OR SSL SS TUS e ta anaataneenmcntonacer shainesgna damien ednoseubeliedaaunaie tongue etc aloa saben cugenannueienyetiantnndenmian 35 6 DOT E E E E E A E 36 C T MNO aea EEE E E E E E E E ASi 36 6 1 1 Analysis WINOOW i sictmnastooqucecneqactsgecuceontcenesdatacandesestettdansitnonutaeoecantaqecincrntccedonsitiantsenoutendnnastpoaedernn lt dbtgidurtont 37 oke Manm 91 0 9 2 e e S eee ee ee eee Se eee ee eee een ere ee 39 GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved Odes INAVIG ATO MOAN ta but ackta ts orcas caceudoe Maercsad E E O 39 6 14 OVErView WINdOW OVEFVIEW DAN 2 abe ies eiaa a yeshelmacs wat leh Sexnaac E a a a a Eaa 40 6 15 GOUISe WINGOW Tack Balcan
33. 3 Comparing the laps If more than one lap is added to the project the analysis window superimposes the graphs of different laps dividing them by channel In this way it is possible to analyse the values of the channels belonging to different laps instant by instant Use the alignment options described in the previous paragraph to move the individual graphs to the desired position then use the measurement mode to read the values of the channels in the position indicated by the cursor Engine Sospension Speed Acceleration 6 8 4 Zoom on the analysis window One of the options offered by the MX2 software is that of performing a zoom on the analysis window in order to enlarge a particular portion of the window or make a wider interval of time or space visible There are different methods for performing a zoom e Using the zoom in and zoom out buttons present on the toolbar e Using the mouse scrolling function e With the and keys on the numerical keypad on the keyboard e Using the Z key on the keyboard to zoom in and the A key on the keyboard to reset the zoom on the current lap y 24 The zoom on the current lap can also be reset using the designated button on the toolbar GR In measurement mode the zoom is performed at the position of the cursor so that it is always positioned in the centre of the analysis window In position mode on the other hand the zoom is performed using the part of the analysis window disp
34. 34 00 25 00 00 18720 100 23 182 IN THE SESSION Lap 7 00 17 711 Update Report SLOWEST LAP TIME IN THE SFSSION BEST SPLIT TIMES IN THE SESSION GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved If the report is created on more than one session the best split times referring to the individual session are displayed in light blue while the overall best split times of all the sessions displayed in the report are displayed in blue Split Time Ideal lap 01 12 227 SESSIOHE 1 Lap 0 00 1 3 892 Lap 1 02 03 405 Lap 2 01 05 380 Lap 3 01 10 418 Lap 4 01 10 962 Lap 5 01 13 397 Lap 6 01 22 543 Lap 7 01 06 789 Lap 8 01 00 408 SESSIOHE 2 Lap O 00 217 674 gal Lap 1 02 04 524 Lap 2 01 06 194 Lap 3 01 10 489 Lap 4 01 12 209 Lap 5 01 15 212 Lap 6 01 22 396 Lap 7 01 08 101 Ga Lap 8 01 00 304 O0 12 502 ele llr SPTE 00 14 686 SPT3 SPT4 O0 143 3412 43 O0 07 019 19 00 08 084 00 07 833 O0 14 479 SE 1 O0 08 096 00 14 02 1 Le 00 12 507 i O0O 08 099 791 00 08 897 00 473 900 3 00 06 2442 Oo oy Fo4 00 13 47 00 14 89 OO 0F S41 3 00 09 188 00 14 26 00 2 1 561 ee eee 00 13 15 00 12 566 00 44 309 1 O0 07 837 00 14 193 00 06 124 A further indicator given by the report window is
35. BUTTON Mogarol7 Vic Adria Ottobianolg Albacete FEE TEE Fannonial Albettone Castelletto Magione Paul Ricard alcaraz Cellole Malagrotta FPompo a Alcarazl Estoril Misano GP Port Giol Altavilla Franciac Misano SBE Port Giorgioll 4seen GP franciacore Misano Rijekal7 ssen SBE Franciacorta Misanolg Silverstone Assen franciacortall Montagnana Siracuza Barcel Gp GET Montmelo Valencia Gp Barcellona Gp GETI Monza SBK Valencia SBF Barcellona Hungara Monza Valencia E a OI FINISH LINE ERASED a SBK Biri ob erez lar Mugello Yaranous Ki Create new Create copy Delete Map rotation deg 0 6 9 5 Setting the split points P7 In order to position the lines where the split times are to be taken select the Split headings from 1 to 4 from the selection control available in the top left hand corner of the Track Library Management window then insert the corresponding stretches as shown in the previous paragraph In order to add the split points it is necessary to respect the order from 1 to 4 following the direction of travel around the track It is not necessary to insert all the split points Ensure that all the split points inserted intersect the course otherwise the split times will not be calculated correctly gt w q TE a SS elelo gt Available tracks Adria 2Sp Cellole Misano GP Port Giorgio Adria EMB2 Misano SBK Rijekal Albacete Estoril Misano08 Silverstone Albettone Fr
36. CHANNEL 4 f Speed Fork E E D O E aoo oo EEE TO FILTER E 5 A Speed Shock O O OL D IC oo 0 0 c M Enable fiter OC 6 fx Speed Shokt O O IO ma T IE loo ooo k 7 fulspeedrocr O O IO O loo Joo e _ _ _ c s Mron O o In Opi 136 e OR 100 advanced 9 MONO m IO O a m 17 42 10 44 LAMBDA v Iv E a 5 v 11 06 1842 ADA 100 R1 None Linear Offset 11 LAP Ch 1 iL C jo 7 LAP 1000 None Offset 121 RPM m jm E O m 0 23219 ict E RPM Offset 13 AA TPS E E m O O jas 1o ADI 10 Linear Offset 14 42 NSAT C C 0 a i j4 3 NSAT 4 None Offset 15 LaTITUDE O O I O 0O ja 43 LATITUDE 100 None Offset 16 Lonain O O O a DO h2 h2 LONGITUDE 100 None Offset ate e is k I m m flue Care Pavia a Daal r In order to apply a filter it is first necessary to enable it by clicking the Enable filter checkbox in the settings window which is opened Manage channel filter Fa W Enable fiter Cancel o o Eee Sune Advanced It is then possible to use the regulation bar below to indicate the percentage of filter application Clicking on Advanced displays the advanced settings From these options it is possible to set the type of filter to be used and the corresponding cutting frequency Manage channel filter X M Enable filter OK Cancel O 100 M Low pass ea I Hig
37. Copyright 2008 GET by Athena Evolution srl All rights reserved 4 2 10 Start acquisition with GET M7 AS To start an acquisition with GET M1 you should connect it to an USB port of your PC start the Download Manager software select it in the Devices and Sessions window and click on the Start Acquisition button Download Manager Ee Options Devices and sessions Riecevice D Serial Number 20062060226 Firmware version 1 333 Close Ant Down Report Download File Stark Acquis Delete all Stop Acquis Downloading Download path Estimated memory duration ha PLEASE NOTE for other features please refer to the M1 AS user manual 4 2 11 Stop acquisition with M1 AS To stop an acquisition with GET M1 you should connect it to an USB port of your PC start the Download Manager software select it in the Devices and Sessions window and click on the Stop Acquisition button Download Manager Fa Options Devices and sessions RaeCevice O Serial Number 20062060226 Firmware version 1 83 Close Ant Down Report Download File Stark Acquis Pelete all Stop Acquis Downloading Download path Estimated memory duration ha PLEASE NOTE for other features please refer to the M1 AS user manual GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 4 2 12 Download MD5W report To download reports from MD5W CHRONO please refer
38. ION Y CHANNELS J a y hal ON Y j A wie f We i W mW O Mi j R I y W Mwea J ah LARAN a bk AAN WA N TYY Iv ET MX2 demo sxp o x i File Analysis Track View Options E COENIN ON f Enge J sospens Speed Acceleration o TAB 3 SPEED AND ACCELERATION oF CHANNELS 3 5 08 If an individual lap is being analysed each channel is represented with a different colour graph If this is not the case and several laps are being analysed at the same time the graphs are represented with the colours of the corresponding laps The analysis window is also composed of the following elements e Y axis this shows the scale and the name of each channel displayed using the same colour as the graph e X axis this shows the scale of the time or the distances according to the settings e Lap bar this is composed of numbered rectangles indicating the number of laps available relative to the selected sessions The coloured rectangles indicate the part of the session displayed in the analysis window Each lap added to the analysis window has a rectangle of the same colour on the lap bar e Linear map can be viewed at the bottom of the analysis window under the x scale if segments have been associated with the course of the selected session the linear map displays the sequence of the segments relative to the area displayed in the analysis window Each segment is displayed with the correspondin
39. NCE REFERENCE CURSOR R acl CHANNEL VALUE ON POSITION CURSOR ho Speed Acceleration kE ITPS t1 04 15 74 t2 04 24 41 d00 08 67 d1 8151 17 d258403 72 dd 252 56 v15 1 CHANNEL VALUES POSITION CURSOR ABSOLUTE DIFF TIME DISTANCE DIFF REFERENCE CURSOR TIME DIFFERENCE DISTANCE GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 8 Display options This chapter describes the MX2 software display options 6 8 1 Moving between session laps Once the lap has been selected in the browser bar it is added to the project It is possible to move between the laps of the corresponding session by simply using the left and right arrows on the toolbar wait AB It should be noted that after changing the active lap the indicator of the laps added to the project located on the overview bar is updated automatically a demo sud Lap 4 01 15 434 eo a oaactina a i lat alena Eae Uf aila Pie oe demo sad Lap 5 01 15 45 i 06 00 06 40 07 20 Time 00 40 04 20 a 13 20 04 00 O40 6 8 2 Selecting the loaded laps A tab for each lap added to the project is present at the top of the overview window Selecting a tab from this window changes the active lap and the analysis window is updated automatically in order to display the corresponding data GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 8
40. T by Athena Evolution srl All rights reserved _ MX2 is the software which allows the user to analyse the data collected by the GET devices The first time the program is started up a demonstration project is automatically loaded This is useful in order to become familiar with the main functions available 6 1 Main window woe MAZ aemo 5 xp Fie Analisi Pista Visualizza Opzioni 7 O Six k S i 7 F ul F F F 7 J i Engine Speed Acceleration i rm l F I a I i j li i F i i A i j J T i if j a E Ehl ad Lal E 7 a O 4 10 O40 a 41 O 4 50 06 00 Tempo A a j j J P i E Tempo The image above shows the areas in the main MX2 window analysis window main toolbar navigation bar overview window course window moD MX2 has two different visualization modes the position mode useful for quick navigation through the laps of the session being analysed and the measurement mode As the default setting the software starts up in position mode To move from one mode to the other quickly simply double click on the analysis window or press the spacebar When MX2 is in measurement mode the channel value table to appear to the right of the analysis window see description in chapter 6 7 of this manual GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 1 1 An
41. TE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved Once a folder has been selected from the tree structure the sessions contained within it are listed in the control just to the right When a session is selected the laps available are listed in the control on the right while in the bottom left hand corner a preview of the course to which the session refers is displayed In the list of the available laps the lap number corresponding time and any notes are present for each heading The fastest lap of the session is shown in red PLEASE NOTE if no course are applied at the session will be display only lap 0 EST Wt prova sxp A File Analysis Track View Options 2 AT 52 br pile E doc_personali File name Track Date Time Car Dr Laptime Note 7 T donload lao 0008 21 ane ee 01 17 290 Oe rs 01 15 907 El MD4 ain m 20030101 01 15 466 eb 20087001 1 15 43 n 20081006 01 15455 d 20081022 01 30 734 fae wd 20081027 OMT 711 In order to add a lap to the project in use it is necessary to click on the corresponding checkbox In this way the lap is added to the list of laps in the project in the list present at the bottom of the browser bar In the same way in order to delete the lap from the project it is necessary to click on the checkbox of the lap again in order to erase the tick Once a lap has been selected the course selection window
42. a i SG Annulla ale Wianeter Std SOOO OOOO Se Cee qc e Type of calibration allows you to choose the type of calibration to use in the channel selected A list of types of calibration appears when you click on the button ith the left button of the mouse button Make the choice based on the type of channel you are working on e g for potentiometer sensors choose Linear The following types of calibration are available Type of calibration No calibration The channel is not calibrated Linear It is a linear type of channel and only the two values X and Y are needed to define the characteristic The channel provides a stepped signal Up to ten levels can be defined RPM Spark Channel is connected to a rom sensor on the spark plug cable enter the Coeff and Offset values based on your engine GEAR Channel related to the gear ratio number entered Enter the X speed and Y rmp values to identify the gear entered in the vehicle The value of speed varies according to the diameter of the tire used and the number of pulses per revolution sent by the sensor placed on the wheel Use the Calc Diameter function for sensors placed on the pinion a screen will open that will allow you to determine the values to enter to obtain a correct measurement of the speed GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved Fields X Y Allows the association of the values read by the sensors in
43. age used by Gate Setup Manager and MX2 The default language for Gate is English in order to change this option proceed as follows e Access the Gate Download Manager options e Select the heading General Options from the options on the left e Certain properties appear on the right for the heading Select language select the desired language e Any changes to the language will be applied the next time Gate is run The languages supported by the current version of the software are English and Italian Options Stark application Normally J Select language English m Mo i Detect languag Select the application language It needs to restart the application to switch language Close GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 4 2 7 Auto detection of the operating system language When Gate is run it is possible to select that the language used by the PC operating system is detected and if supported is used as the default language If the language is not found the default language used is English In order to activate this mode proceed as follows e Access the Gate Download Manager options e Select the heading General Options from the options on the left e Certain properties appear on the right for the heading Detect language at startup select yes Options Start application Mormally Select language English ad Detect languag Mo Select the a
44. ality The options available are Open last session if MX2 is not running this starts the MX2 software with the last session downloaded If MX2 results as being open from another session the data is imported from the acquisition device to the PC but it is not displayed for analysis Open last session also if MX2 is running this displays the last session downloaded from the acquisition device even if MX2 is already running The session is added to those which are being analysed at that moment Do nothing MX2 does not open after the automatic download of a session Open last session downloaded the next time you open MX2 this opens the last session loaded into the PC the next time MX2 is started GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 4 2 5 Name format of the saved file Using the following procedure it is possible to modify the name format with which the files downloaded from the data acquisition devices are saved onto disk e Access the Gate Download Manager options e Select the heading Download File from the options on the left e Certain properties appear on the right select the required option for the heading File Format The file save format setting can be displayed from the Devices and Sessions window of the Download Manager field displaying the sessions present on the acquisition device connected to the PC 4 2 6 Changing language he lt is possible to change the langu
45. alysis window The analysis window is the main area of the MX2 software This window shows the values of the acquired channels in a graph format lol x 3 File Analysis Track View Options 18 x FINISH LINE ft ti nA EER ad y v SPLIT TIME LAMBDA 04 00 04 04 04 08 04 12 04 16 04 20 04 24 04 28 4 32 4 36 04 40 04 44 3 04 52 56 05 00 05 04 z h demo sxd Lap 4 01 15 434 00 50 01 40 2 30 03 20 04 10 05 0 05 50 06 40 It is possible to add more channels to be displayed on the main window or to create tabs onto which to distribute all the channels to be analysed in the most suitable way In the demonstration project the Engine Suspension and Speed Acceleration tabs are displayed by clicking on each of these tabs it is possible to display the graphs of the corresponding channels in the analysis window ET K2 denon MEE Fie Analysis Track Yen Options lal x CB AS A CANAVAN jx l kad Paat i m TAB 1 ENGINE CHANNELS GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved T MX2 demo sxp 0 x i File Analysis Track View Options onzena AA 4 i O UE Se 7 7 j N Engine Sospension A Speed Acoleration aaa aaa z Lh ee ml i au Rar on ea ERN PA CATY Ji h oe we Mh I TR ET ma ii Pea i biia TY Giidi idaig i iaid biaa a et itka ankarat i ati i w Tp A RY TAB 2 SUSPENS
46. anciacorta Montagnana Siracusa alcaraz franciacorta08 Montmelo Valencia Gp Alcaraz0 GET Monza SBK Valencia SBK Assen GP GET2 Monza Valencia Assen SBK Hungaro Most0 Vallelunga CIV Barcellona Gp Imola Mugello GP Vallelunga SBK Binetto Interlagos Mugello SBK Vallelunga Brasilia lsam08 Mugello VYarano08 Brno GP Jerez GP new_track Vic Brno SBK Jerez Nogarol Brno Jesolo0 Ottobiano08 Calafat Ledenon PannoniaQ8 Cartagena Magione Paul Ricard Castelletto Malagrotta Pomposa Rotazione Crea nuova Crea copia Elimina 9 In order to delete a split point select it in the control in the top left hand corner then press the Eraser button as seen for erasing the Finish Line GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 9 6 Setting the segments The last heading of the previous selection control marked Segments allows the user to define the color sectors which will be displayed in the lower bar of the analysis window These are used to divide the course into distinct parts which can be displayed on the linear map on the analysis window and in the reports dealt with in the next chapter The segments are positioned in the same way seen before for the finish line and the split points For the segments though it is necessary to specify additional information such as the name and type After inserting all the stretches which mark the segments click on the Left curve usually red o
47. anges required FE er te 4X2 Idemo sxp eert that Pent dLa y Oey l OR f 7 a 3 4 HA jF j JR FU Ce E Engine Sospension JN Speed Acceleration a a a ee ee E 4 1 A GRAPH MANAGEMENT BUTTON X AXIS UNIT OF MEASURE SELECTION MENU 9 axis Time C Position Cancel ap D AA y 04 08 04 12 04 16 04 20 re 23 B 6 8 6 Locking the visualization scale between tabs In the analysis window the use of the zoom functions on the graphs has no effect on the zoom of the graphs present in different tabs from the one selected It is nevertheless possible to connect the zoom of all the tabs present in the analysis window so that the same level of zoom is applied to all the tabs In order to do this it is necessary to activate the Lock visualization scale between tabs option present on the View menu To restore the default setting click on the heading again in order to erase the tick 2 demo sxp _ File Analysis es dom rectangle id Yw F y Zomxin Num Zoom out Nur Show all Lock visualization scale between tabs a ease KS D metas Sospen Toolbar Setup bar v Track window gt Report window Gy Browse window vy Overview window Download window GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 8 7 Changing the visualization settings i In order to access the visualization s
48. btained number of decimal places and the formula to be used In particular in order to write the formula of the mathematical channel it is possible to use the quick links in the list present in the bottom left hand corner of the window Once the object has been specified Channel Constant Function Operator the list is automatically updated with the available elements By clicking on one of these elements a short description of the element selected is displayed in the checkbox to the right Double clicking on one of the elements in the list on the other hand updates the formula box inserting the element selected at the end GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved UNIT OF MEAS OF THE MATH CHANNEL DECIMAL PLACES OF THE MATH CHANNEL NAME OF THE MATH CHANNEL Configure mathnchannel Mame Acceleration Uden m z2 Frecision fi der SPEED 6 103 6 Channel Constant C Function Operator amp Al Execute the dernyvative of on an interval tin milliseconds oK Cancel OPERATORS OF SELECTION OF THE THE MATH OPERATORS OF THE CHANNEL MATH CHANNEL DESCRIPTION OF THE OPERATORS OF THE MATH CHANNEL Finally on clicking on OK the newly created mathematical channel is added to the list in the channels window 6 6 2 Modifying and deleting a mathematical channel By double clicking on the mathematical channels cr
49. cting this heading activates the window below where it is possible to choose the desired lap e Inthe Configure segments sectors box select one of the headings Sectors which represent the split times SP1 SP2 etc Segments which represent the stretches which the track has been divided into using the Segments function which can be accessed from track management see chapter 6 9 6 e Select the channel from which the report is to be taken in the Available channels area e Inthe Functions box select the type of function to be applied to the report Min restores the minimum value present in the chosen channel and in the selected acquisition stretch Max restores the maximum value present in the chosen channel and in the selected acquisition stretch Avg restores the average value of the selected channel In restores the value of the channel at the moment of entry into the selected acquisition stretch Out restores the value of the channel at the moment of exit from the selected acquisition stretch Delta restores the channel difference typically used for system channels such as Lap time Time the overall acquisition time Lap distance the length of the lap Distance the length of the whole acquisition In order to select these elements from the report creation window double click on the headings to add Each heading selected from the report creation window is displayed in bold and will appear on the report window summary Once the
50. dd offset confirm the data entered with the OK button Set offset i Cancel GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 6 Mathematical channels A mathematical channel is a channel which is obtained by applying the appropriate mathematical functions to one or more of the previously acquired channels It is possible for example to create the acceleration mathematical channel using the speed derivative 6 6 1 Creating a mathematical channel Clicking on the Add math button located at the top of the channels window displays the window for the creation of a new mathematical channel Channels Bar Quick Search Digital UL Anala My 3 GP 4 Can AR Mah fx Add Tob ab Add math Save profile Engine Sospension Speed Acceler Add math SSS N Channel Scale Aiii Max Int Henz Ref Fiter Calit Ortset d cO I C 0 fx Acceleration ig E onfigure math channel Marne New expression iden ooo Precision E Acceleration Acceleration acos AN TALT azin atan Cancel NEW MATHEMATICAL CHANNEL ima CREATION WINDOW 2 rx Sresdrok TT E felsetstea I E E r alioamua E E ufa demo sud Lap 4 01 15 424 From this window it is possible to set the name to be given to the new channel its unit of measurement the precision which is to be o
51. default position of the course window is in the bottom right hand corner of the program window In this area the image of the course associated with the session in use is displayed If more than one lap has been added to the current display the trajectory of the selected lap is shown in the course window The part of the lap displayed in the analysis window is shown in the course window with a white line beside the trajectory of the selected lap This line is only visible when not in trajectory analysis mode I button on the quick functions bar If MX2 is in mesurement mode see chapter 6 7 2 of this manual a circle shaped indicator with the colour of the lap selected will appear automatically This indicator is always found in the position corresponding to the position of the analysis window cursor by moving the cursor therefore the position indicator will move to the corresponding position on the course If the reference cursor is activated in the analysis window it is displayed in the course window with a red cross only if Mx2 is in measurement mode GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved T MX2 demo sxp E Fie Analysis Track View Options l 1 x mA oe Cs C3 C3 GY 2 l kasi l A kas LOLZ T r ANALYSIS CURSOR H il il i H lI I n My TLE NA Lt a ih i W WL Wy WU UW LU WL ul l jy N l vN i i i i REFERENCE CURSOR f
52. e analysis window For example with a lower limit equal to 0 Down and an upper limit equal to 50 Up the graph will be displayed in the bottom half of the analysis window whereas with a lower limit equal to 50 and an upper limit equal to 100 the graph will be displayed in the top half of the window It is also possible to display the graphs in the same area of the analysis window by giving common values to the Down and Up columns By setting for example 0 for all Down columns and 100 for all Up columns of the channels the graphs will take up all the vertical space of the analysis window Once the display limits have been set it is important to lock the channel so that its position and dimensions are not reset to the default program values E So a a ia N Channel Visible Scale Over Color Lock Downz Up Auto Min Max a File Analysis Track View Options _ 0 fx Acceleration E ps i 0 0 0 0 o A OOO ia op Za Cy Co QP ye oi _ fx Acceleration t m iw jO C s0 10 M 00 0 0 OB OAT 74 2 2 70 ad Pam Px ay 2 fx Dit Time 5E TO ooo 0 000 A Pc A Sere m aaimeka tanmen amp 3 fx Dit Sess AAT O O iC E oo 0 0 piteSpeedFok O O IEC La TH oo 0 00 Ba 5 fx SpeedShock O O ID on ID loo Joo r 8 fr S
53. e Synchronize tracks icon located on the main toolbar or select Synchronize track library in the Setup menu j Setup Manager File Setup Watch Dispositivo invia setup a dispositivo g jg Sincronizza orario Sincronizza libreria piste Crea nyowo Apri da disco Apr da dispositivo Chiudi setup attivo Synchronize track library ICON RAmomina Balba canale Copia canale e Activate the RADIO MODE function of your MD5W e Wait for the track update to finish numbers will appear in the lower part of the dialog box indicating the data transfer progress e Atthe end of downloading operations a message will appear stating that the operation was successful e Disconnect the ANT key from the USB port if you do not need to download other data NOTE for more information see the user manual for the data download kit code DK00080003 5 3 6 Firmware update only for MD5W To update the firmware of the device connect the device to the PC and click on the Firmware Update icon on the main toolbar A dialog box will appear asking the user to select the bin file containing the firmware to upload in the instrument Firmware Update ICON Start the radio connection and wait for the operation to finish NOTE for more information see the user manual for the data download kit code DK00080003 GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved sa oh ar
54. e coloured lap rectangles in the lap bar located above the analysis window Also in this case the graphs of the channels are displayed in the corresponding intervals and the current lap shown in the tab of overview window Is also changed if the rectangle is moved onto a different lap e by clicking on the analysis window and dragging the mouse to the right or to the left the graphs scroll to the side In this case the current lap shown in the tab of overview window is not change if the graphs are dragged onto a different lap esr a seas 5 x File Analysis Track View Options F a TR 7 18 x zA in m PD ey awry fo gt N dl 2 242x 70 amp fi Engine Speed Acceleration LAP BAR 1 eo om ir nan e i j Th a lL wy ht a iy ae Valiant Vr RIAT ia r 04 00 04 04 04 08 04 12 04 16 4 20 04 24 04 28 04 32 04 36 04 40 04 4 04 48 04 52 04 56 05 00 05 04 Flt demo sud Lap 4 01 15 434 OVERVIEW WINDOW 00 50 01 40 02 30 03 20 i 05 50 06 40 GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 7 2 Measurement mode The measurement mode is used to carry out measurement on the graphs which are displayed This mode can be activated with a double click on the analysis window or by pressing the spacebar on the keyboard MX2 demo sxp i l BETES a File Analisi Pista Visualizza Opzioni l x TARSA QI I oe
55. e left hand navigation bar If the window is opened in the minimised format expand it by clicking on the arrow positioned in the top right hand corner of the window itself Fie Analysis Track View Options Laptime 00 08 211 01 17 290 01 15 907 01 15 466 01 15 434 01 15 455 01 30 734 00 17 71 ap 3 01 15 466 A Ret h demo sud Lap 3 01 15 466 The left hand side of this window provides a tree structure showing the folders present on the computer hard disk As a default setting the sessions are downloaded from the devices into the Documents Get folder of the current Windows user creating a folder with the name of the device from which the data MD3 MD4 etc is downloaded and a subfolder with the date on which the data was created On the browser bar the main folder containing the various sessions is selected automatically in order to speed up selection operations T MX2 prova sxp lolx a File Analysis Track View Options 18 x 9 OAT Je eA PIA i E i browser Bar E o doc_personali File name Track Date Time Car Dr Lap Laptime B download Magione 23 08 2007 12 25 o0 0008211 Erg Get 1 on 17 290 gl L Demo E MD4 2 015307 TY J 20030101 j 73 01 15 466 y J 20081001 4 015434 1 20081006 5 01 15 455 a S 20081022 6 01 30 734 20081027 d 20081028 7 0017 711 d tracklib r EE s f GA
56. e outings L Available sectors 00 08 211 01 17 290 FL SPT 1 01 15 907 SPT 1 SPT 2 01 15 466 SPT 2 SPT 3 01 15 434 01 15 455 01 30 734 00 17 711 0 1 2 3 4 5 6 T Available channels Functions Available operations Acceleration Acceleration_f Diff Time avg Diff Space in out Speed Shock delta Speed Shock_f ai ae a H Cancel The controls at the top of the window allow the user to manage the tabs of the report window As with the analysis window see chapter 6 4 4 in this window it is also possible to divide the elements into different tabs in order to obtain a personalised display of the reports In order to select the tab on which to create the report click on the Current Tab selection control and choose the tab required if present otherwise it is necessary to create a new one The buttons immediately to the left New tab Delete tab Rename tab allow the user to create a new tab delete a previously created tab or change the name of an existing tab respectively The bottom of the window on the other hand allows the user to configure the report to be created To configure a report proceed as follows e Select one of the sessions in the Sessions present area Here all the sessions loaded in the analysis window are shown e In order to select the laps click on one of the headings in the Configure laps box All all the laps are selected Best the lap with the best time is selected Choose sele
57. eated with the method referred to previously the mathematical channel creation window is opened from which it is possible to modify the setting for the channel selected Once the necessary changes have been made click on OK to save them and return to the channel window In order to delete a mathematical channel simply select it from the channels window and press Del on the keyboard GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 7 Visualization modes From the analysis window it is possible to set two different visualization modes the position mode useful for quick navigation through the laps of the session being analysed and the measurement mode As the default setting the software starts up in position mode To move from one mode to the other quickly simply double click on the analysis window or press the spacebar 6 7 1 Position mode The position mode is used as the default mode when the MX2 software is run and allows the user to choose which of the graph areas to analyse quickly There are three different methods for moving the graphs inside the analysis window e by moving the selection square in the overview window displaying the graphs of the channels in the corresponding interval Note that when using this method the current lap shown in the tab of overview window is also changed if the selection square of the overview bar is moved onto a different lap e by moving th
58. ed press Ctrl C to copy the data to the Microsoft Windows clipboard The data selected is now available for any software To display the data using Microsoft Excel for example open the program select a cell and use the Paste function to paste in the data 6 10 6 Creating a report on the maximum and minimum channel value In order to display a report on the maximum and minimum values of the channels displayed in the analysis window in a certain interval select the corresponding button on the main toolbar the mouse pointer transforms into a magnifying glass 3 MX2 demo sxp a File Analysis Track View Options Ba OLOLLO CZ 1 CS TF Oe 0 OFFA S22 RI IeaAeaT iv GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved Click on the starting point of the desired interval in the analysis window and then holding down the left hand button drag the mouse to the final point of the interval to use and release the left hand button The context menu appears as shown below MX2 demo sxp a Fie Analysis Track View Options vx i Ce VC We NG JV U as AA 221x20 GB a4 i Ia e Gf Speed Acceleration rX i Et 04 00 04 04 Selecting the heading MaxMin creates a report on the maximum minimum and average values of the channels displayed relative to the interval selected Haxhin Time Range O4 17 936 04 42 239 4 109
59. edenon Fannonialg Albettone Castelletto Magione Paul Ricard alcaraz Cellole Malagrotta Fomposa Alcaraz Estoril Misano GP Port Giol Altavilla Franciac Misano SBE Port Giorgial 4ssen GP franciaco Misano Aijekall Assen SBE Franciacorta MisanoU Silverstone Assen franciacortale Montagnana Siracusa Barcel Gp GET Montmelo Valencia Gp Barcellona Gp GET Monza SBE Valencia SBE Barcellona Hungaro Monza Valencia Binetto Imola Most Vallelunga CM Brasilia Interlagos Mugello GF Vallelunga SBE Emo GP same Mugello SBE Vallelunga Erria SBE Jerez GP Mugello Yaranol fa ow _ oe 6 9 1 Selecting the courses Select the course required by left clicking on the relative name search through the Tracks Present list The course Is selected and the corresponding image is displayed automatically on the left hand side of the window Once a course has been selected it is possible to operate on it and save any changes made without necessarily having to apply the course to the sessions in use 6 9 2 Applying the course to the loaded sessions ta After loading one or more session into the project it may be necessary to change the track assigned by default in order to use a course with a different layout of the finish line and the points where split times are measured for example In order to assign a new course to the session in use it is necessary to select it from the track list then press Apply to apply the choice
60. eennieeneulauicns 86 S AT PUTING SO SSION A A EEE E E A E E A Suntmatosen 87 GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved Os 12 2 EX DOM TUNCUON asceicsiatcccistectata A A E aus saaancannt A 88 CZS CONVEMING Gil ORNE aaa a E E E 88 6 139 Removing Ne SOWA Ossenisse i a aa A a en ET 89 Dear Customer Thank you for choosing a product from the DATA ACQUISITION AND ANALYSIS SYSTEMS range from GET by Athena Evolution We are certain that our passion and experience can help you to express yourself successfully in all the competitions in which you intend to compete therefore we invite you to read this manual safe in the knowledge that it can help you make correct use of your new GATE MX2 software by Athena Evolution GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 1 SYSTEM REQUIREMENTS In order to install Gate on a personal computer ensure that the requirements shown in the table below are respected nina Reson Pentium III or equivalent Pentium 4 equivalent or higher Fam JE 2 INSTALLATION Before install GATE make sure that GET data logger or ANT key aren t connected at your PC USB ports In order to install Gate MX2 software run the GATE_ setup exe file by double clicking on the setup icon The guided procedure will begin 2008101 7 GATE_ setup exe GATE Setup GETOATA If the message shown in the figure below appea
61. eeseueenseesaeeenses 73 6 9 3 Creating deleting and copying the courses cccsecccceececeeeeeseeeeceeeeeseeeesaucesseeeesaueessueesseeeesaeeesseeeeseeeegas 73 6 9 4 Setting the finish line ac cdes wwcat acess hserasueiaeiwidlaveauecsiies batusatsednetdvtoiniaShoddach beara ladetaserdavbonacbuanayacns tres nEn stake sncenine 74 629 5 Sening TIS SONI DOMS case alte arate cy tren nade psec tena wi nade ead att AE 75 696 Seling Me SEGIMEMNIS ooire panir ra a E E E nace dea a NEE a 76 6 9 7 Rotating and zooming in on the selected COUISE ccceccceeceeeeeceeeeseeeceeeceeeeseeeseeeseeeseeeseeeeaeeeeeeeegnenens 77 698 Saving INE COUNS ius seahorse a E E anaes a ieee 77 OTO RODOM WINGO W cmene e E A E E E ctebapeten lacs 78 6 10 1Greatng a new repor srenisisrasiir aneii eeii eaii araa aAirr ai 79 6 10 2Updating an existing reDorkesiii a a E A 80 6 1053 BeSi SpIIL Times ENG eA D a A nanenonteaitees 80 6 10 4 Saving and loading a FED O Me scicess candvasien ceassenas sidenseanadateasacssncdvancdunads ver Wai daviedaucet widen aden dahawabesttadsnaitee tiene 82 OTO SEX DOMING Qala aoii e E Miku E A init Ravacl stow aei tied uaset wares 82 6 10 6Creating a report on the maximum and minimum Channel values ccseceeeeeeeeeceeeeeeeeseeeeaeeeeeeeeneesees 82 Baty Pon TUM CT ONS cdareckncniasguniuntioradeesteuats TE wines Gla esaliesiia tine cud ee iludd E pubtduuaOuntnaudsceelces 84 612 Advanced ODUONS aia tecciaerrtyrotasiacctaivii N daguh
62. ettings control window click on the designated button on the toolbar or click on the heading Settings from the Options menu ET WY demo sxp S File Analysis Track View Options 7 a rate te Setup tm a Engine 4 Sospension Speed Acceleration H w demo s p Bi a TEF y Analysis options Colors and fonts Show cursor info Show lap times BE M Show lap times on the overview I r Show split times l La 5 i ied Lr pall La J al Change measure table view Unlock overview bar Unlock track bar sons e 04 00 04 04 04 05 04 16 04 20 04 24 04 25 O42 04 36 04 40 FL 1 1 12 2 2 3 3 4 45 There are 2 tabs in the dialog window which appears the first Analysis options allows the user to set the following controls e Show horizontal cursor to display a horizontal line at the point of intersection between the cursors and the graphs in the analysis window e Show cursor info to display a numerical box which shows the value relative to the position of the cursor of the channel selected when measurement mode is active e Show lap times to display the time of each lap along the finish lines e Show lap times in the overview to display the time of each lap in the overview window e Show split times to display the vertical broken lines in the analysis window which identify the position of split times e Unlock overview bar
63. f speed varies according to the diameter of the tire used and the number of pulses per revolution sent by the sensor placed on the wheel Use the Calc Diameter function for sensors placed on the pinion a screen will open that will allow you to determine the values to enter to obtain a correct measurement of the speed e Fields X Y Allows the association of the values read by the sensors in the fields marked with X to values set by the user in the fields marked with Y This combination of values defines that calibration of the channel By clicking on an X field and then clicking the Capture button on the top right corner of the Calibration dialog box the current value of the channel Y field is associated to the previously selected X field WARNING The direct acquisition procedure described above must be made with the GET data acquisition connected to a PC If there is no data acquisition device connected to a computer you can enter the values in the X and Y fields manually using the keyboard NOTE consult the instruction booklet of the sensor being calibrated to know the XY values to enter in the appropriate fields e The Show in volts option if enabled shows the voltage of the channel expressed in volts 6 5 5 Applying an offset You can use the offset the button to specify a value to be added or subtracted to the value read from the selected channel Use negative values to subtract the offset from the channel and positive values to a
64. g colour and name The linear map can be activated deactivated using the M button or from the analysis window context menu e Finish lines these are represented with white numbered vertical lines and are only displayed if they have been inserted in the course in use e Split times these are represented by white vertical broken lines They are only displayed if the course in use contains split points and only if they have been enabled in the program options window GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 1 2 Main toolbar p The main toolbar is situated at the top of the program window and allows the user quick access to the most commonly used software functions olola ea AA The toolbar is composed as follows NAN A displays the previous lap B displays the next lap C sets the manual automatic alignment mode useful when comparing several laps D selects the X axis display scale E zoom in analysis window F zoom out analysis window G reset zoom on selected lap H zoom of the selected area or report of the maximum and minimum channel values of the selected area I sets the lap trajectory comparison mode trajectory analysis mode L enlarges the track loaded in the project M reduces the track loaded in the project N resets zoom 1 1 on the course O ruler tool useful for performing measurements in the course window P options window useful for c
65. ght 2008 GET by Athena Evolution srl All rights reserved 5 2 1 Selecting channels To select a channel from the list first click on the sign on one of the available categories The list of channels belonging to the category will appear Then click on one of the channels to see the properties on the right side of the dialog box j Setup Manager OO x File Setup Watch Dispositivo Logging rate Setup MD3 PRO A A Analog channels System channels lt i LAP lt j ALARM lt j GEAR UL Switch channels Ja GPS channels A Serial FR CAN channels TUL Input Capture channels 5 2 2 Channel in acquisition settings After selecting a channel you can indicate whether or not to enable the acquisition A channel in acquisition collects and saves data during the sessions conducted with GET devices To enable the acquisition of the selected channel click the left mouse button on Logging rate visible in the screen showing the channel properties on the right hand side Then click on thl button to see the list of acquisition frequencies available for the selected channel j Setup Manager File Setup Watch Dispositivo es cd e Decimal places Logging rate 10 Hz VEAT E Setup MD3 PRO BVA Analog channels Elie System channels FLL Switch channels el Sa GPS channels Gly
66. h pass 0 e l Band pass T Notch 0 0 GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved Once the OK button has been pressed a channel with the name of the original channel is created and the ending _f is added The new channel will be visible in the analysis window if the original channel was visible If this was not the case it must be selected manually ouik Search L Digital I yd a T awm uel iepenens IE FILTERED CHANNEL ORIGINAL CHANNEL sama Speed Shack_f 6 5 4 Calibration The calibration of a channel is an essential operation to convert the signals collected by the sensors into data understandable to the user The Calibration screen opens by clicking on the desired channel s Calibrate button with the left button of the mouse button see figure below ta Setup Manager iol x File Setup Watch Dispositivo lt gt Ss Quick Search Digital UL Analog AA System lt gt Gps Ma can 38 Math D fy Aggiungi Tab Salva Profilo F j Main Canale Watch Yalore Unita Barra Calibra Impost 9 1 ADI 0 Calibra Imposta 2 AD2 0 ate costa 3 AD3 a 0 Calibrazione XU asta ore C 0 max 16 105 ey oe 5 ADE E 0 16 165 min 16 106 eee 6 ADS re 0 ste gt ADS E 0 M Nostra in Vol 98 8 AD12 0 asta g VBAT 0 000000 asa 10 TEM E 0 000000 P 3 sta 11 Sw5 0 osta 12 SWE E 0 x
67. he relative split times is displayed ral am 1 ORES COT bOI ed amp Pe EN ce za ng wv Vv E A JE 7 GR GUE fal a P SENAN Split Time deal lap 07 15 06 i4 E iL on es E o on Lap time deta SPT2 SPT3 demo Lap 0 00 08 211 9 Lap 1 01 17 290 Eee Lap 2 01 15 907 oo 42 e28 oo 25 208 oo 42 A2a i g Lap 4 01 15 434 Naaa 00 18 586 00 18 00 Lap 5 071 15 455 00 13 33 12 O05 6 1 inal Lap 6 01 30 44 043 4 oo 25 870 00 18 73 i 00 33 sz Lap 7 00 17 71 1 The report is presented in the form of a table divided into sessions in which each line represents a lap and each column represents a sector or a segment CAUTION the first time the report screen is opened a table appears showing times relative to the first four laps of the loaded session only default layout In order to see the full report of the times refer to the next chapter in this manual and create a new report using the Lap Time channel GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 10 1 Creating a new report A In order to create a new report simply right click on the Report window and select the heading Report management The window for creating a new report is then displayed Current Tab Spit Time New tab Delete tab Rename tab Configure laps Configure segments sectors TAB MAN AG E Loaded outings fall 7 Sectors All CONTROLS Activ
68. headings required have been chosen click on OK and wait for the report to be created GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 10 2 Updating an existing report Once a report has been created using the procedure described in the previous paragraph it is possible to update the values table quickly by simply clicking the Update report button located at the top of the window N e a wo T a wo a E p se SPT1 SPT2 LAMBDA min SPT1 SPT2 LAMBDA max SPT2 SPT3 SPT2 SPT3 Lap time LAMBDA SPT2 SPT3 max Lap time min Updating an existing report can be useful when after modifying the settings of the course or the channels the user wishes to display the new summary maintaining the same report settings 6 10 3 Best split times and ideal lap j Creating a report using the Lap time channel the report window gives an indication of the best split times for each sector or segment according to the type of report created The best split times for the session can be recognised as they are displayed in blue Split Time Ideal lap 01 15 076 SPT1 SFT2 SPT2 SFTS Lap O 00 08 211 00 08 240 Lap 1 01 17 290 EBs 00 26 00 48 914 00 18 54 Lap 2 01 15 907 D0 13 626 00 25 808 00 48 529 Lap 401 15 466 00 13 276 00 25 745 00 43 142 00 18 86 00 18 00 MACA FASTEST LAP TIME ed Lap 6 01 20 7
69. ii E i ne ea e aa ia 40 62 Creating and managing projects arc a ce da E NE 42 63 OPENING Ihe Session oirn en a a saa cen aucasmenebaawin ra ogate aveanon cane ciate Daten weaude 43 6 4 Displaying the chanielS acsnedes Sores ace Stnacnas a a accutane I E A deeneacnactest 46 6 4 1 Ordering by Name Or DY NUIMDCE ivasteiactushertuanverscaandiaastsiicudatts a a a E 48 TERNE iets a AE E E E EA E EEE E AA E E A E EE AAA I EE A E E E T 48 64S Ghannelkdisplay Mier sia T a a TEA EE 49 6 44 Creating anew TaD re EN A daguaeemieemauaumiies 49 6o QperalionS OM PO OaE eee anata in et cr Nae re A 50 65 1 Lockand AUIOSCAle TURCHOMNS i usecuass sicer naii a aE E a E a TEINTE oe 50 6 5 2 Setting reference valie Scianun a EE A A waded eens 51 OSS ADDIVATI E e E E R R a E 52 62074 Gallon al OM oina a a dude a a a a A 53 6 5 5 AODIVING Al OMSET arera a r E EET EE E E 54 OO Maem A CNAME O a a A ouahbwontwandoe 55 6 6 1 Creating a mathematical channel wists avisiescisiccwcaneniastunivaleeRaasuiveeea avd suiind sana war Uaudabeaduddagu jeawiekdabenundavnntalcdeenlecniles 55 6 6 2 Modifying and deleting a mathematical ChANnell ccccecccseeeceeeeeeeeceeeceeeeseeeeseeeseeeeseeeseeeeaaeeeeeeeaeeesens 56 6 7 Visualization NODES arearen a a aa ruben a etic eaumenbadauas 57 O A POSON MOOG rann e tM elie ia Bashi a a a a a a E e 57 6 7 2 Measurement INO 6 eerueo e earen EE E E EER 58 Oa M O O a a a A E 59 62724 AliGhiment TO a GRS DOIN eiea n a E a a
70. in amp Canale Watch Valore Unita Barra Calibra Imp 17 T H20 v 30 000000 cooo Ei came hr g VBAT M 16 207568 y l Galore ctr 1 ADI E 0 Calibra E 2 AD2 0 Cae ii 4 AD4 ie 0 Calibra E 5 ADG A 0 Cae ii 7 ADS is 0 Cale i E ADS 0 Calor i 3 AD3 a 0 Cale 10 TEM m 0 000000 cama Lr 11 Chik n aes L 5 4 4 Stop Watch tua To stop the Watch on the channels previously set click again on the Watch icon or select Stop Watch from the Watch menu GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 5 4 5 Calibration a The calibration of a channel is an essential operation to convert the signals collected by the sensors into data understandable to the user The Calibration screen opens by clicking on the desired channels Calibrate button with the left button of the mouse button see figure below ig Setup Manager 10 x File Setup Watch Dispositivo lt gt sa Quick Search Digtal UL Analog A System lt a Gps Ja Can D AR Math T fx Aggiungi Tab Salva Profilo F y e Canale Watch Yalore Unita Barra Calibra Impost 1 ADI Calibra rapes 2 AD2 na late Calibrazione max 16 165 e posta 16 1654 min16 106 osta SSeS SSeS 0 0 000000 0 000000 x1 vl x2 Y2 x3 Y3 14 NSAT 15 DISTANCE 16 BEACONUTM 0 0 0 x4 Y4 0 x5 Y5 0 000000 P P 0 000000 0 000000 x v 0 000000 x8 y8 x9 Yg x10 Y10 gost
71. layed as reference GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved It is possible to zoom in on a specific area of the analysis window by clicking on the corresponding button on the toolbar then clicking on the graph and dragging the mouse horizontally in order to draw the selection rectangle for the zoom When the mouse button is released a context menu appears from which it is possible to choose the heading Zoom which allows the selected area to be enlarged or choose the heading MaxMin which generates a window with the maximum and minimum values of all the channels in the selected area ET MX2 demo sxp a File Analysis Track View Options TA y A 7 p D ZS Os Ze wy 9 Vv a S gt p gx GOS Fel i Ul AREA ZOOM BUTTON Zoom MaxMin CONTEXT MENU saannnooooneanannancensnsanannnseehaeesnanndehsadsnnd asl ssanasannedlsasniinase dank landsbaccesssannannsccossnnanndhh A1 0 O EREEREER t 04 00 04 04 GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 8 5 Setting the X axis It is possible to set the X axis of the analysis window in time or position mode In the first case the unit of measurement will be seconds while in the second case the unit of measurement will be metres To set the X axis select the Graph management button on the toolbar choose the option required then press OK to make the ch
72. lbar or select Open from device in the Setup menu Download Setup to device ICON File Setup Watch Dispositivo Invia setup a dispositivo me Sincronizza orario Sincronizza libreria piste Crea nuovo Apri da disco Apri da dispositivo ludi Setup attivo Logging rate g Rinomina Calibra canale Copia canale 5 3 2 Sending the active configuration The configuration file defines the default settings for some GET devices at the time of writing this manual file it applies only to the range of MD3 data acquisition To send the configuration file to a GET instrument select with the device connected Send configuration on the Device menu the software will open a dialog box asking which configuration file to use ie Setup Manager _ x File Setup Watch Dispositivo a Avvia Acquisizione ya D Ferma Acquisizione Invia Configurazione NO PROPERTIES Scarica Report GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 5 3 3 Time synchronization To synchronize the time of the device with that of the computer connect the device to the computer click on the Synchronize time icon located on the main toolbar or select Synchronize time on the Setup menu File Setup Watch Dispositivo Synch ronize a time ICON Invia setup a dispositivo Sincronizza orario ncronzza norena piste
73. n Download Manager Download Manager X Devices and sessions Device 0 Serial Number 20062060226 Firmware version 1 83 No driver 20 11 2008 15 30 12m 33s sxd No driver 20 11 2008 17 50 12m 49s sxd No driver 26 11 2008 16 51 9m 20s sxd No driver 01 12 2008 12 32 13m 39s sxd No driver 03 12 2008 17 44 37m 29s sxd Close Ant Downloading Download path Estimated memory duration NjA PLEASE NOTE we recommend to keep default settings 4 1 Downloading sessions from GET data logger If you would like to download a session acquired with your GET data logger except for MD5W CHRONO connect it to your PC USB port and wait until the software show the connection in Devices and session text box To download the sessions from MD5W CHRONO please refer to Data Download Kit 00080003 user manual By setting the Download Manager Options see chapter 4 2 you can activate manual or automatic download of the sessions acquired Download Manager X Options Devices and sessions No driver 20 11 2008 17 50 12m 49s sxd No driver 26 11 2008 16 51 9m 20s sxd No driver 01 12 2008 12 32 13m 39s sxd No driver 03 12 2008 17 44 37m 29s sxd Close Ant Down Report Downloading Download path Estimated memory duration NjA WARNING GET DATA LOGGER EXCEPT MD5W CHRONO WILL BE NOT RECOGNIZED IF RADIO STATUS OPTION IS
74. n This function will be found in the MX2 File menu ue Track view D tics i 7 E File Analysis Vv at 22 7 AAS 44 Eid pe ce k Trim Active Session Save a5 0 00 00 Start Time k 0 08 16 Stop Time i Export Lap j Start Lap i Start Stop W LLU T Stop Lap LW ee ne cma Once the window has opened select the position and the name of the new session file to be created by clicking Save as The file save dialog box will be opened Next at the bottom of the window select the interval of time or the laps to trimmed and used in the new session Click on Trim to begin the process of creating a new session Trim Active Session INTERVAL ae SELECTION CiUsers Documents Getiproval ssp Save a5 0 00 00 EE En StartiStop INTERVAL OF LAPS SELECTION BOX Export Lap jo H Start Lap START TRIM SESSION BUTTON fo Stop Lap The saved file can be analysed again by opening the session which has just been generated see chapter 5 3 of Cancel this manual E E Stop Time GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 12 2 Export functions A The data displayed in the form of graphs in the analysis window can be exported to a Txt or Xml file Clicking on the heading Export from the File menu opens the data export window m Save as Browse Available chan
75. n with the cursor appears on the right hand side of the screen O4 21 105 LAKE DA The first elements displayed indicate the value of the X axis time and distance which is being referred to for reading the values of the channels represented in the graphs Under this the boxes with the names and values of the channels are displayed each with its own colour in order to set the channel colour see chapter 6 4 of this manual and with the value assumed at the point where the position cursor is situated If more than one lap is being compared the channels will be grouped by name and will be displayed with the colour of the lap to which they correspond The channel which is being measured is indicated with a box with a white background it is possible to move observation between the channels in use using the up and down arrows on the keyboard or by left clicking the value of the channel to be chosen In order to resize the values table position the mouse pointer on the left hand edge of the table click using the left hand mouse button and drag it to the left or to the right according to the dimensions required GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 7 8 Reference cursor The reference cursor is an additional cursor which is used as a reference for displaying the data between two cursors The reference cursor is represented by a red vertical line and can be activated in three
76. nels Channel Export Hertz Output frequency limit Hz RPM TPS a SPEEDG Time interval Use current session time interval The top of this window is composed of the controls for selecting the file in which to save the data Clicking Browse opens a window in which it is possible to specify the path name and type of file for saving the data There are two types of file which can be exported Txt and Xml The first allows the user to view the data quickly while the second is useful as being a standard format it may later be imported for use by other software The part of the window immediately below on the other hand provides the controls for selecting the channels to export The channels available on the list are only those displayed on the current tab of the analysis window In order to enable a channel for export click on the corresponding selection control in the Export column so that a tick appears To ensure that the channel is not exported click on the same control to erase the tick The next column called Hertz provides an indication of the frequency at which the channels have been acquired sampling frequency In the next column called Output frequency limit Hz it is possible to specify a frequency limit at which each individual channel is exported This means that if for example a channel is sampled at 100Hz 100 times a second it is possible to set a f
77. ng item in the list of setups available GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 5 1 4 Renaming the active setup To change the name of the active setup click on Rename in the Setup menu and type in the new name Press the Enter key to save the new name j Setup Manager Fil Watch Dispositivo invia setup a dispositive Fee Sincronizza orario w be SUE ana Vehicle type STANDARD CAR Crea nuove Comment Apn da disco J Driver name Apo da dispositrya Chiudi setup attivo Vehicle name Rinomina aliiracanale Copia canale EAA Serial HRR CAN channels H U Input Capture channels 5 1 5 Closing the active setup To close the active setup and then delete it from the list of setups available click on Close active setup on the Setup menu If necessary you will be asked if you want to save the setup before closing it je Setup Manager File Setup Watch Dispositivo invia setup a dispositive j Sincronizza orario m e Vehicle type STANDARD CAR B Crea nuove Comment Fores EL da derz Driver name Apri da dispositive E Vehicle name Chiudi setup attivo Rinomina Eala canale Copia canale PIEP TE mA Caral GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 5 1 6 Modify active setup properties Some information on the vehicle and pilot can be associa
78. nnulla CHANNEL SELECTED TO COPY Parametri relativi ai canali selezionati P Gan message id esadecimale Calibra canale 2 After selecting the target channel press the OK button to apply the property 5 2 5 Calibration There is a Calibrate Channel button on bottom right hand side of the program See the relevant section in the Watch chapter for more information GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 5 3 Communication with devices After connecting a Get device to your computer you can start sending receiving operation of the setup and synchronization using the Setup Manager software 5 3 1 Sending and receiving the setup Once the setup and channels to enable the acquisition have been set up the setup must be sent to the device so that it can use the settings specified To send a setup to the device connect it to your computer and then click on the Send setup to the device icon located on the main toolbar or select Send setup to device on the Setup menu Send setup to device ICON j Setup Manager Sincronizza libreria piste Crea nuovo Apri da disco Apri da dispositive Chiudi setup attivo Logging rate 4 Hz GEAR Rinomina Calibra canale To modify the setup used by a device connect it to your computer and then download the setup by clicking on the Download device setup on the main too
79. nsion h Speed Acceleration N Thannel Visible Scale Over Color Lock Down Up Auto Min Max Input Herte Ref Fiter Calib Offse 4 0 tx Acceleration a E E E C7 0 0 0 0 Acceleration 1000 None Offsel 1 F MAmulanahinn FF M Im zx Im fan nn ji w Aecralaratinn F nnn Mana Nffsal Once the new tab has been added it is possible to continue assigning the channels bearing in mind that all the channels selected in the new tab will be visible in the tab with the corresponding name in the analysis window In order to delete a tab simply select it from the channels window and press the Del button on the keyboard GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 5 Operations on the channels This paragraph describes the functions available in the channels window 6 5 1 Lock and Autoscale functions By selecting the Autoscale check box the software automatically regulates the vertical dimension of the channel graph As the default option the autoscale is activated automatically when the channel is set to visible The Lock function on the other hand is used to lock the dimensions and position of the graph Y axis on the values set in the Down and Up columns These values can only be set when the channel lock has been performed and specify the vertical limits as a percentage of the positions which the graph assumes inside th
80. nted sheets In the subsequent tabs Analysis Tracks Report on the other hand it is possible to specify the elements to print and a subtitle relative to each of the elements In order to add an element to be printed select it from the list on the left by clicking over it with the left hand mouse button and press the gt gt button To delete from the elements to be printed select it from the list on the right and press the lt lt button A VNS Print Configuration Analysis Tracks Reports Print Configuretfon Analysis Tracks Repotts Print Configuration Analysis Tracks Reports Select Subtitle Select Subtitle elect Subtitle Subtitle Font Change Font Subtitle e z Subtitle Font Active Graphs Printed Graphs Active Tracks Printed Tracks Active Reports Printed Reports Engine Engine Current Track Current Track Split Time Split Time Sospension Speed Acceleration Annulla ADD DELETE ELEMENTS TO PRINT BUTTONS Once all the desired elements have been added press the OK button In this way the print preview is displayed automatically In order to navigate between the print preview pages use the Next page and Previous page buttons available at the top of the window Press the Print button to continue with printing or the Close button to close the preview MX2 demo sxp ME a File Analysis Track View Options 2 8 Oa Ziaayvae AA Ze a Print _Nex
81. onfiguring the MX2 options 6 1 3 Navigation bar p The default position of the navigation bar is on the left hand side of the program window The navigation bar is composed as follows A displays the browser window B displays the channel window C displays the report window D displays the course library E opens the Gate Setup Manager F opens the Gate Download Manager GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 1 4 Overview window overview bar The default position of the overview window is in the bottom left hand corner of the window This area provides an overview of the session used listing the available laps and displaying the graphs of the channels selected for the whole session LAP TAB LAP TAB LAP CORRECTLY DISPLAYED IN THE ANALYSIS WINDOW oo so0 orao 2 3 02 20 04 10 05 00 05 50 The part of the lap displayed in the analysis window is marked off by a rectangle with grey edges while the numerical value indicating the lap selected is highlighted in white By dragging the rectangle onto the overview window the corresponding area is displayed in the analysis window At the top of the overview window there is a series of tabs which represent the list of laps selected in the project in use It is possible to open the laps displayed here quickly by simply clicking on the corresponding tab 6 1 5 Course window Track Bar The
82. ove GATE and all of its components At the end of the software removal process a window is opened to inform the user that the program has been uninstalled successfully GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved
83. peed Shock tT mE wki IE oo oo 7 fx SpeedForkt OO O E we C 000 0 00 y s MAlronceus O O o IP Of fs amp 3 AA MONO O 0O O Bo CO 7 4 woja Lameoa O O E O ID mo 18 42 ey 11 lt LAP 0 0 jo O E e 7 12 UL RPM E jo E Cl O jo 23219 ome 0 ee Me Le es o 14 Ja NSAT Ic O OC mel ID g 15 a LATITUDE Oo io oO ro O a 43 16 a LONGITUDE E IC fim ii O hie fiz z lanat O O O Ar P 22 278 8 18 sreo M mM R o so M lo 230 ere tane ir mM im m rH In 106 04 00 04 04 FL 4 1 GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved Engine y Sospension Speed Acceleration i SS ee ee a i 6 5 2 Setting reference values The Ref function which can be activated by clicking on the boxes in the fourth to last column of the channels window allows the user to set up to three reference values for each channel Ref CT e FUNCTION FRCS COLUMN 2A ai ZA Vk hk P AB Kel ind i ET AA Channels Bar GENES Ost Quick Search Digtal UL Analog A Sys lt lt GPJ Ja Can AR Math fx Add Tab Addmath Sav profile N Channel Visible Scale Over Color Lock Down Up Auto Min Max Input Hertz Ref Filter Calib Offset _ 0 fx Acceleration a 0 0 0 0 Acceleration 1000 None Offset 1 Fx Acceleration t lv loo loo pE 1000 LP None Offset 2 fx Dit Time m 0 00
84. pplication language It needs to restart the application to switch language Close 4 2 8 Other options It is possible to set the mode with which Gate is run as a normal application the program appears on the monitor or in the icon tray the program runs and is automatically reduced to an icon in the bar in the bottom right hand corner near the clock The first time Gate is installed the normal mode is set If the user wishes to change this option proceed as follows e Access the Gate Download Manager options e Select the heading General Options from the options on the left e Certain properties appear on the right for the heading Start application select the heading n tray icon Options a ore OO Select language English ad Detect languag Moa Select the application language It needs to restart the application to switch language Close GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 4 2 9 MD5 Configuration options The MD5 Configuration window allow the user to modify the MD5W CHRONO communication options To modify these settings please refer to Data Download Kit 00080003 user manual WARNING SET RADIO STATUS OFF TO DOWNLOAD SESSIONS FROM GET DATA LOGGER EXCEPT MD5W CHRONO Options Device id Oo000 Dombadrie S MDS Configuration Om Port Auto On Com Port COMIS Insert the device id GATE user manual rev 03
85. proceeding as follows e Access the Gate Download Manager options e Select the heading Download from the options on the left e Certain properties appear on the right for the heading Erase after download select yes Options General Options Root Directory C Users alerioF i Documents i Update i Use custom dow Wo Download File 4 T I onfiquration Custom downlo Download Modality Automatic aad Erase after dow no After download Open last session if M2 is m File Format Driver Mame Session times i E Download Files From devices automatically or manually Close After the automatic download of all the sessions present on the acquisition device the memory will be erased PLEASE NOTE we recommend to keep default settings 4 2 4 Data analysis opening mode The first time Gate is installed each time a session is downloaded from a data acquisition device the MX2 analysis software opens automatically to allow it to be displayed and analysed CAUTION MX2 will not display any downloaded session if the Demo project is loaded In order to use the analysis software it is necessary to build a new project see chapter 6 2 of this manual This operating mode can be modified using the following procedure e Access the Gate Download Manager options e Select the heading Download File from the options on the left e Certain properties appear on the right including the heading After download mod
86. r Right curve buttons usually green then click on the corresponding stretches of track to assign the type Manage track library le Pleje b Available tracks Adria 25p Cellole Misano GP Port Giorgio Adri F Esm RIGHT CURVE AND LEFT Albettone CURVE BUTTONS alcaraz f Alcaraz Monza SBE Valencia SE 4zsen GP GET Monza Valencia Azsen SBK Hungaro Mosir Vallelunga C Barcellona Gp Imala Mugello GF Vallelunga SBE Binetto Interlagos Mugello SBE Vallelunga Brasilia same Mugello VaranoUe Emo GP Jerez GF nem track Vic Brno SBE Jerez Mogaroly Bria Jesolol OttobianoQ Calafat Ledenon Pannoniale Cartagena Magione Paul Ricard Castelletto Malagrotta Pomposa Create new Create copy Delete Map rotation deg fo Apply The type colour selected will be assigned to the stretch of track which is clicked on then the user will be requested to enter a name to identify the segment As the default option the segments are identified with a number whose value is increased from time to time but it is also possible to specify a personalised name by left clicking near the text box with the number on the left of the OK button Press OK to assign the name to the segment SEGMENT ia SETS OK BUTTON NAME BOX curva curve As the default setting the colour green is used for right curves the colour red for left curves while the stretches which are
87. r manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved PROGRESSIVE N AND VISIBLE FEATURE SCALE FEATURE CHANNEL NAME CHECKBOX CHECKBOX AA Sys lt a GPS oC i n E RR Math fx Add Tab Add math Save profile Channel Visible Scale folor Ref Filter Calib Offset Acceleration jie wi AI T None OFfset A 25 4 24 0 Acceleration 100 1 ffals ft oo Lock a 7 Pe corate t fieco PAA PAM fort twe foc Noe lor 3 Tx Diff Space Att i Z IE oe i Speed Fork Sospension Speed Acceleration Ef 0 frene ot Fa Speed Fork _F C Speed Fork _f Mone Offset NW ronceua a ao jameoa I aee 2 iv z z 16 one olalar I I IP 15 ene T FE re a e e r lft I IIH LS 21 fix Lap distance l DAE I zA Aa OVER FEATURE CHECKBOX io mi J J e oo mi 6 P1 pam Eo r Co fjue fe C Ih Linear OFFset one OFFset AP ea219 Icl1 RPM OFFset Di Pir Ln T og m i cL Ww I m mM a ear D4 m a E a 2 a a ae ri Mi iT piv ANTALT mJ eed fl oo Bo mo oe Ce J oo oo 30 None Offset one on None Offset 4976 0 Absolute distance 1000 None OFFset mir 4770000 0 9410 0 UTR Mone OFFset a AHRNE ERIE 01 30 73 Laptime Lapdistance 1000 Co sa Feat EN s
88. requency limit of 50Hz so that the values are exported at half the base frequency The control located at the bottom of the window called Time interval allows the user to specify whether to export the data relative to the whole session in use or whether to export only the data belonging to the display interval in the analysis window Once the file for export has been selected the channels have been set and the time interval has been chosen click on OK to begin the export procedure A message will be displayed when the procedure has finished 6 12 3 Converting an sxr file aS The sxr file conversion function allows the user to open a file with a sxraw extension GET acquisition device raw data format and to save it in the format compatible with the MX2 software This function normally takes place when the data is being downloaded from the instrument see chapter 4 2 of this manual and unless there are any particular conditions it is never requested from the user GATE user manual rev 03 8 8 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 13 Removing the software In order to remove the software from the computer first close the Gate and MX2 programs Press the Start button on the Windows menu select the headings All programs gt Gate gt Uninstall Gate The Gate Uninstall window is then opened To confirm removal of the software click on Yes GATE Uninstall r Are you sure you want to completely rem
89. rs click on Run Apri file Ayviso di protezione Impossible verificare l autore Eseguire il software Nome GATE er 2006101742006101 7 GATE_setup exe Autoe Autore sconosciuto TTT Tipo Applicazione Da SAPROGETTIAP20 GATE Wer 200810174200810 W Avvisa sempre prima di aprire questo file k SII file non dispone di una firma digitale valida che ne verifichi l autore X E seguire solo software proveniente da auton considerati attendibili Come determinare quale software eseguire GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved On the first installation page click on Next ff Setup GATE lel Fs Welcome to the GATE Setup Wizard This will install GATE on your computer It is recommended that you close all other applications before continuing Click Next to continue or Cancel to exit Setup Select Destination Location Where should GATE be installed M Setup will install GATE into the following folder To continue click Next If you would like to select a different folder click Browse C Program File G4TE Browse At least 29 7 MB of free disk space is required lt Back Cancel It is then possible to select a name for the folder which will appear in the Windows Start menu Continue by clicking Next Oo i Setup GATE TIOR Select Start Menu Folder Where should Setup place the program s shortcuts
90. rs ValerioF Documents Cerca cartella Use custom dow No EE fee elect the Folder M Custom downlo em Download Modality Manual m E Rete Sege eer dae Ilse H E Pannello di controllo a amp cestina After download Open last session if Msz is m ai Valetiok File Format Driver Name Session times i Pubblica El ia Disco locale 0 4 FF psy Access Denied Ds E e Unit DYD RW Es E G GET SERVER IDatihANTONID 5 4 Th LNB St Web personal sh x Custom path to download sessions E Close All the new sessions will be downloaded into the chosen folder In order to reset download into the folders generated automatically simply go back to the heading Use custom download path and click on no PLEASE NOTE we recommend to keep default settings GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 4 2 3 File deletion mode The first time Gate is installed when the sessions are downloaded onto the PC automatically the files are not automatically deleted from the memory of the data acquisition device In order to erase the memory of the device it is necessary to open the Download Manager select it in the Devices and Sessions list and click on Download All If the download is manual this is the only possible way of erasing the memory of the devices If Gate is set to automatic download see chapter 4 2 1 it is possible to set auto erase of the memory
91. s way by clicking on Finish the FTDI Clean Utility dialog window will be opened f Setup GATE Completing the GATE Setup Wizard Setup has finished installing GATE on your computer The application may be launched by selecting the installed icons Click Finish to exit Setup M Solve USB conflicts GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved In the dialog window click on Clean System without changing any of the fields ff FTDI Clean Utility 1 0 VID Hex FTDI PID Hex Status Ready The Information dialog window which appears after Clean System is pressed requests the user to disconnect all devices from the PB USB port do as requested and continue by clicking on OK Information Disconnect all FTOI devices fram the PE When confirmation is requested click on Yes to continue Confirm fou are about to uninstall all FTO drivers for VID Ox0403 and all PIDs Do you want to continue When deletion of the drivers is requested click on Yes It is now possible to install the USB driver by installing the GATE software again GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved Gate is the main program from which the applications for downloading and analysing data for the setup of acquisition devices and for selecting software settings are launched SELECTION BUTTON SELECTION
92. ssisicsuacudssantaaviwtiielerelcesaneceaessacedscaseuasadununtacnosa vee ecdabsncs saleedaneaeneaateetounts 15 4 2 5 Name format of the Saved fil cccccceeccceeecececseeceeeeceeeceueeeeeessueesseeteaeesseessusesseesseeeeaeesseeeseeetseeeneeeseess 16 4 26 Changing language sssrinin aena a epairen r EES E NEAR EE nA EE 16 4 2 7 Auto detection of the operating system language ccceeccceeeeeeeeceeeceeeecseeeaeesaeeeaeeessaeeseneeseeeseneeneeeeaees 17 Wa OOO E E E E A E E E N 17 4 2 9 MD5 Configuration Options cccccccccsseccceeecceececseeeeceececeueeseeueecsucesseeeseueessusesseeessusesseeeessusessueeeseneenens 18 4 2 10Start acquisition with GET WW AS iors cacetaceuacacs sauces ach aeeai a a ae aaa Ra ELin VAE iia 19 AA TSOP acquisition WIN MT AS ascsencontccatsonascrsitarnsivnets eeni a ea a dine EE Ra EE E aE EE ES 19 4 2 ie OW MO ACI MDSW CIO Olea setter nares aretneteon ease erases ontesivtstesnmasienecaiswaeie T EEn a aE EDAR 20 5 Be INP GE PR eee erecicte aoe ce oases E etic tase E mice sigan enscecussmasiedeuce cexesoeuieceocmecs 21 Onl Setup MiamMa Ce ICME scenes tescrnagasuhina cn E E E E EE E a acenal anit 21 5 1 1 Creating a NEW SCUID sasdecwxcascxeseccslsnncsnseixcensacouanatsdadtshetsedeestncduieaaen gaaeneletnudadantudsiiadudeendusteaaneciantceniesseecsinsals 22 5 122 Opening And Saving an existing SQUID ssndcevecabeiviacontivsdsectsinvetecudnscovenned abiiasashsbusmebovncdsdunedeucaseenieaudienswcbias 23 Dlo SUS
93. t to the actual value measured during acquisition Engine Speed Acceleration i Ean a SS a as E E a 4 1 4 3 REFERENCE LINE 04 00 04 04 04 28 4 32 04 48 05 00 05 04 05 08 Tempo 8 FL GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 5 3 Applying a filter The Filter function third to last column in the channels window allows the user to apply a filter to the channel under exam in order to aid reading in the event of disturbances to the acquired signal for example In order to enter the filter application window left click once on the box in the Filter column relative to the channel to filter 1 MX2 demo sxp E File Analisi Pista Visualizza Opzioni FILTER l y AIAL yA py Channels Bar Quick Search Ditam UL Anao AA Sys ge GPT a Can RR Math fx AddTab Addmath Sav profile Le N Channel Visible Scale Over Color Lock Down Up Auto Min Max Input Hertz Ref Filter Offset a 0 Dpi O IC IC C 188 0 0 Acceleration 1000 clo ry 1 fx Acceleration f m iB L m 0 0 2 0 Acceleration f 1000 None Oifee FILTER BOX ay 2 fx Dit Time O O O F 0o00 0 000 Dit Time 1000 None Offset OF amp 3 f Di Spce O JO IC E oo 0 0 Diff Coane tann Mona Miho
94. t you want to create Once you have selected the device press the Ok button to create the setup Select Device Device type Setup M1 Lite S Setup M1 Pro Setup MIDS LAF Setup MDS PRO Setup MDS SERIES Setup MD4 Setup MDS Setup VR Setup VR Ext The setup that you just created will appear in the top left part of the program where it shows the active set up Setup Manager Iof x File Setup Watch Device Yj aa Active ini Setup Location NO PROPERTIES y MDS SERI Setup MD3 SERIES Analog channels E A System channels TUL Switch channels Ja GPS channels A Serial FR CAN channels LL Input Capture channels ACTIVE DIALOG Calibrate Channel GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 5 1 2 Opening And saving an existing setup To open a previously created setup select the Open setup from disk icon on the toolbar of the program or select Open from disk from the Setup menu SETUP MENU jar Setup Manager By doing this a dialog box will be displayed where you can select the setup file that you want to open After selecting the file press the Ok button the setup is added to the list of setups available To save the setup active on your computer s hard disk select Save from the File menu or Save As in the same menu to save the setup with a ne
95. t_Page Previpade Single Page Zoom mielie Close Ke it LG GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved The print preview can also be reached through the heading Print preview from the File menu The heading Print from the same menu brings up the print window 4 4 a demo sxp a File Analysis Track Miew Options 7 New project Chrl h Open project Ctri 0 Save project Ctrl 5 Accelera Save pioet ae Close project Update data folders CTAL G Trim session Convert A file Impar Export Print setup CTAL S Print Ctrl P Cw A ae i ES Exit 6 12 Advanced options By clicking on the heading File from the main program menu it is possible to access certain advanced options through the headings Cut session Export Convert sxr file ERT H2 demo sxp a File Analysis Track View Options 7 New project Chrl h x Open project Chrl 0 Save project Crl 5 4 Seve pier as ja Close project Update data folders CTAL G Trim session Convert SA file Impatt Export Ctrl F Print preview E wit GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 12 1 Trimming a session If the user wishes to copy a part of the session in use and save it on a new session file it is necessary to use the Trim session functio
96. table length neither too short otherwise it does not divide all the laps nor too long otherwise it may intersect the lap at several points If on the other hand the finish line is already positioned and the user wishes to change its position slightly position the mouse pointer on the corresponding dash and drag the ends until reaching the desired position i elelo l Available tracks Adria 29 Adria Alba Albetto alcaraz COURSE ZOOM BUTTONS garol obiano08 nnonials ul Ricard mposa Alcaraz0 Estoril Misano GP Port Gio Altavilla Franciac Misano SBK Port GiorgioO Assen GP iacor0s Misa Rijekal Assen SBE Silverstone tee FINISH LINE FL Siracusa Barcel Gp Valencia Gp Barcellona Valencia SBK Barcellona nanga Aonga Valencia Binetto Imola Most0 Vallelunga CIV Brasilia Interlagos Mugello GP Vallelunga SBK Brno GP lsam08 Mugello SBK Vallelunga Brno SBK Jerez GP Mugello VYarano08 i gt Create new Create copy Delete Map rotation deg fo Arey GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved In order to delete the finish line ensure that the heading Finish Line is selected in the drop down control in the top left hand corner then press the Eraser button Manage track hbrary EJ sel je 2 2l Kim Available tracks Didia 2S D7 ERASER
97. ted to each setup To modify this information click on a setup so that the screen for changing the properties is loaded on the right side of the dialog box To change the type of vehicle click on the corresponding item and then click on the button Gia display a list of vehicles available Select the vehicle to use To edit other items on the list including the name of the pilot the name of the vehicle and comments click on each of these and type in the text to use i Setup Manager Of x File Setup Watch Device mo Cp Setup Location vehicle type AEROPLANE Comment AGUABIKE CROSS MOTORCYCLE Driver name Vehicle name OFFSHORE Setup MD3 PRO RALLY CAR AA Analog channels v STANDARD CAR AA System channels STANDARD MOTORCYCLE LIL Switch channels 72 GPS channels AA Serial FR CAN channels UL Input Capture channels VEHICLE TYPE E LE 4 Select the value in the combo box control P Hexadecimal can message id calibrate crane 5 2 Operations on channels The bottom left side of the program dialog box contains a list of channels available in active setup organized by type je Sebup Hanagei pH HIS PAO p av CHANNES AVAILABLE IN E Sich damnet ACTIVE SETUP T i GS channek i AR Eria E F COH chenal EAI beet Capire chann GATE user manual rev 03 Copyri
98. the ideal lap i e the lap which could have been achieved adding together the best split times The ideal lap is displayed in the top left hand corner of the report window GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 10 4 Saving and loading a report One of the options offered by the MX2 software is to save the reports created so that they can be loaded and displayed later on In order to save a report simply right click on the report window and select the heading Save layout The program will request a position and a name for the file to be saved In the same way in order to load a previously saved report simply select the heading Load layout from the same context menu and finally select the corresponding file Ideal lap 01 15 10 SPT1 5FT2 SPT2 5FTS Lap time demo Lap 0 00 08 211 00 08 2410 Lap 1 01 1 7 230 00 12 686 00 26 443 00 19 914 00 18 646 Lap 2 01 15 90 O04 S626 0025 808 00 45 6209 Lap 3 01 15 466 aaeei 00 17 847 OS can a eo Manage reports Load layout ill Lap 4 01 15 434 Save layout w 4ubosize cells 6 10 5 Exporting data Ka The data displayed in the report table can be copied so that it can be used with other programs In order to select the data to copy click on a cell in the table and holding down the left hand mouse button drag the mouse in order to select the required data interval Once the mouse button has been releas
99. tine 6 4 4 Creating a new tab yo The next control the Add Tab button allows the user to add a new tab to the analysis window The creation of a tab may be useful if the user wishes to organise the channels to be displayed into distinct spaces MX2 demo sxp File Analisi Pista Visualizza Opzioni ADD TAB N Channel Visible Scale Over Lock Down Up Auto Min Max Input Hertz Ref Filter Calib Offse_ 0 Tx Acceleration we Ci E L EA 0 0 0 0 Acceleration 1000 None Offsel 4 f Acealaratinn F Im EA Im E i rm nn nn Acealarsatinn F inn Mana Mffeal The demonstration project for example has three tabs Engine Suspension Speed Acceleration each of which contains the channels relating to it This division of channels basically allows a tidier and more detailed graphic display Selecting a tab from the analysis window in fact will only display the channels associated with it By clicking Add Tab the new tab will be created automatically in the analysis window and the channels window with the default name New In order to rename the tab simply double click on it using the left hand mouse button in the channels window and specify the new name f MX2 demo sxp TAB NAME File Analisi Pista Visualizza site 2 X Vis AARI J2 br a a A ya POT k Channels Bar i it ek Search Digtal UL Analog A Sys ge GP 5 Cant AR Math fx Add Tab Add math Save z Engine E Sospe
100. tup Watch Dispositiva GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 5 4 2 Channel filters The next part of the toolbar of the Watch dialog box allows you to filter the channels shown according to their type If you click on the items Digital Analog System Gaps Can Math the underlying list of channels will show only the type specified i Setup Manager File Setup Watch Dispositivo gt gt Quick Search Digtal UL Analog f System ge Gps 35 Math f Aggiungi Tab Salva Profilo 5 4 3 Start Watch To start Watch on one or more channels select them by clicking on the corresponding Watch check box in the list of available channels Click on the Start Watch icon on the toolbar or select Run Watch from the Watch menu File Setup Watch Dispositivo a Math fy Aggiungi Tab gt tae Utd iayyvy Digital UL Analog M A System lt a Gps P Ja Can A Yalore Unit Barra 9 v 0 000000 Calibra 17 TH M 0 000000 Calibra Start Watch ICON 1 ADI 0 Calibra 4 ADA 0 Calibra The bar in the boxes of the Bar column of the channels added to Watch displays status of the channels i Setup Manager File Setup Watch Dispositivo ED gt Quick Search Digital UL Analog P System lt a Gps P 2 Can TD RR Math T fx Aggiungi Tab Salva F lt gt Ma
101. uttons on the toolbar allow the user to select which lap of the session used to operate on useful when creating a new track in order to perform the operations described above on the best acquired course 4 6 9 8 Saving the course When modifying the settings for a course for example inserting segments or moving the finish line it is important to press the save button in order to memorise the new settings i Saving the new course does not imply that the new settings are used in the session in use In order to apply the changes to the session in use it is in fact necessary to press the Apply button A E gt l Create new Create copy Delete Map rotation deg fo a a e This double step allows the user to modify several courses selecting them one at a time from the list on the right without having to modify the course used by the project sessions GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 10 Report window The report window allows the user to display a summary of the times achieved in the laps of the loaded sessions In order to display the report window simply click on the corresponding button on the left hand navigation bar In the top of the window there is the button which updates a previously created report In the part immediately below that on the other hand the table summarising the times of the loaded session lap time and t
102. w name jig Setup Manager fs exact Tel Gann irae 1G saprete cmane GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 5 1 3 Selecting a setup You can create and open more than one setup at the same time All the setups used are listed at the top left of the program window Each item available in this list indicates the type of device compatible with the setup and the file path on your computer s hard drive only if the file was previously saved ACTIVE SETUP LIST OF SETUPS IN USE je Setup Manager File Setup Watch Device r t t na PIRETA KAZ Mictis Saa Setuplocation o Weil type STANDARD MOTORCYCLE 5 an a D3 PR 0 EE Driver name Vehicle name Yamaha R1 Setup MD3 PRO A Analog channels lt j System channels UL Switch channels Ja GPS channels A Serial FR CAN channels UL Input Capture channels Fe ee E Parameters related to the selected channels Hexadecimal can message id Calibrate channel However only the setup selected is considered an active setup The active setup is the setup that affects all of the settings applied to different channels and to the setup itself Please note that in the list of setups the one which is active is shown in blue To select a setup click on the correspondi
103. zoom in on the course window TRACK BAR WITH TRAJECTORY COMPARISON BETWEEN 2 LAPS 6 8 9 Zoom on the course window In order to display an enlargement of a specific part of the course it is possible to enter in measurement mode see point 6 7 2 and position the cursor near the point of the course which is to be zoomed in on It is then possible to use the Zoom in and Zoom out buttons on the main toolbar to enlarge or reduce the display of the track inside the window These zoom functions are particularly advisable during visualization in trajectory analysis mode when it is necessary to identify the differences between the trajectories of the laps added to the project LAP 2 TRAJECTORY LAP 1 TRAJECTORY GATE user manual rev 03 Copyright 2008 GET by Athena Evolution srl All rights reserved 6 8 10 Ruler tool The ruler tool which can be activated by pressing the second to last button on the main toolbar allows the user to measure the distance between two points inside the course window In order to use this tool click on the course window button to set an point from which to start measurement then hold down the left hand mouse button drag the pointer to the final point and release the button This operation produces a white segment with the indication of the distances between its 2 ends in metres IG El N tS S I ma a B RULER TOOL BUTTON EE

GATE / MX2 USER MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents