User Manual for FDU
Contents
1. Switch ON the power source The power LED on the FDU 2500 glows red indicating that the unit is powered and ready for use Connecting Extension Phone to FDOU 2500 Extension phone can be connected to FDU 2500 at RJ 11 interface using an RJ 11 cable FDU 2500 includes two RJ 11 interfaces Extension phone should be connected to the RJ 11 interface marked EXT iF Plug one end of the RJ 11 cable to the RJ 11 interface marked EXT on FDU 2500 2 Connect the other end of the RJ 11 cable to the RJ 11 interface of the phone Note You must have a phone unit and 2 wire RJ 11 cable to use this feature Phone is not supplied with the FDU 2500 unit O ab puar op 5 0b O Connecting Group 3 Fax Machine to FDU 2500 FDU 2500 can be used for sending and receiving fax messages when connected cable to the RJ 11 interface marked FAX on FDU 2500 to a Group 3 fax machine at the RJ 11 2 Connect the other end of the interface FDU 2500 includes two RJ 11 RJ 11 cable to the Group 3 interfaces Group 3 fax machine should fax machine be connected to the RJ 11 interface marked FAX 1 Plug one end of the RJ 11 Note Contact your service provider to check for Fax service on the SIM Card Connecting a PC to FDU 2500 through USB port You can use your FDU 2500 for interface of FDU 2500 connecting a PC through the USB interface on FDU 2500 1 Plug in one end of the2. e kan 5 f d g DD 47 il hy Le Le F Getting Started Satellite antenna and mounting adapter Receiving Making Calls GPS antenna with cable 25meter USB driver CD USB cable RJ 11cable and FDU 2500 User Manual Fax Message CC Installation Instructions After unpacking and ensuring that carefully If you encounter any difficulty FDU 2500 and all its accessories are in installation contact your service intact and present proceed with the provider for assistance installation Please read the instructions n a 2 2 7 amp fe 2 man s S gt Antenna Installation The FDOU 2500 antennas set consists connecting Satellite antenna to of the following components FDU 2500 25meter 1 Satellite Antenna with mounting 3 GPS Antenna with attached adapter coaxial cable for connecting 2 Satellite antenna cable for with FDU 2500 25meter gt Installing Satellite Antenna The satellite antenna is a rectangular angle The angle can be patch antenna and is supplied along adjusted using the angular with a mounting adapter The mounting information provided on the adapter also has an elevation angle mounting adapter Details will adjust function be provided in the antenna 1 Mount the antenna on to any suitable fixture mounting pole or wall on the rooftop using the mounting brackets and the bolts provided The antenna Should be facing skywards in the direction of the THURAYA satellite
3. USB To use USB interface install the USB driver for FOU 2500 in the PC USB cable to the USB port of your driver is included in a CD which is PC provided with the product 2 Connect the other end of the Note Contact your service provider to USB cable to the USB check for Data service on the SIM Card Docking Thuraya Terminal in FDU 2500 For successful operation of FDU 2500 Thuraya terminal must be in SAT Only mode and data link rate is set to 19200 Baud Note Ensure that the Dust cap behind the Thuraya terminal is removed before attempting to dock 1 Place Thuraya terminal with the display facing up 2 Gently lower the Thuraya terminal into the docking cradle provided on FDU 2500 coupling the antenna hole with the antenna connector Switch on FOU 2500 10 3 Thuraya terminal display will show Fixed Adapter for couple of seconds if the docking is done successfully There should be maximum Signal strength in the display otherwise inform the service provider Ensure full signal strength on the display Undocking Thuraya Terminal from FDU 2500 In FDU 2500 Locker device is installed for mechanical locking Thuraya terminal cant be undocked until the locker is unlocked First find the status of FDU 2500 Locker device If the Locker is locked unlock it and do the next steps 1 Allow the Thuraya terminal to complete all the ongoing functions 2 Switch off the power of FD
4. and should be at the installation guide book Fix the antenna in such a way that the connector at the base is accessible when mounted Connect the coaxial cable marked Satellite Antenna Cable to the antenna connector located at the base of the satellite antenna and tighten it properly by turning it clockwise Leave enough length for a small loop and secure the rest of the cable using the cable ties 4 Connect the other end of the satellite antenna cable to the satellite antenna connector marked SAT on the FDU 2500 by the side of the connectors op 2 ep is cS e av 5 ie 5 Adjust the azimuth and the elevation angle of the antenna according to where you are Details will be provided in the antenna installation guide book so as to ensure the highest signal quality hb indicated on the LCD display Installing GPS Antenna The GPS antenna comes with attached coaxial cable for connecting with the FOU 2500 unit 1 Find an appropriate location on the rooftop to mount the antenna Make sure the antenna have a clear view of the sky Maintain a separation of about 0 5 to 1 m eter between GPS and Satellite antenna 2 Mark locations of the screw holders on the surface roof top for fixing the antenna External Accessories FDU 2500 needs to have external accessories for full functionality Please make sure that you have the following 1 Thuraya terminal with activ
5. powering up FDU 2500 Using FDU 2500 as a wall mounted unit FDU 2500 can be fixed on the wall by using the bracket Slots for brackets are basically provided Slots for brackets are provided on the FDU Mounting FDU 2500 on the wall i Find an appropriate location on the wall for placing the FDU 2500 as a mounted unit PA Place the bracket on the fixing location and mark the location of screw hole 3 Place a suitable nails length on the wall for mounting FDU 2500 4 Handset holder Change the direction of Handset holder to a wall mounted unit Connecting Satellite Antenna 1 Connect the coupler at the free end of the coaxial satellite antenna cable with the connector marked SAT on FDU 2500 gi Hook FDU 2500 to the bracket on the wall 2 Tighten the connector by turning it clockwise Tyd rN Ue Bin E oe Connecting GPS Antenna iv Connect the coupler at the free end of the coaxial GPS antenna cable to the connector marked GPS on the FDU 2500 2 Tighten the connector by turning it clockwise Connecting FDU 2500 to Power Supply Adapter Plug the Power Supply Adapter connector into the DC IN connector on FOU 2500 Use the other end of the Power Supply Adapter to connect FDU 2500 to the main power source 1 Connect the dc plug of AC DC power adapter to FDU 2500 and AC power cord to AC DC adapter 2 Connect AC power to the external power source 3
6. tet ett tte tee eet eet teen eee tee eee e te ene nee cee ee eens nee cee eee ee aeenes 21 Warnings eeeeeeseeeeereerererrerresrreereereesrrerreeerenreeerrerreerreereereees 21 Care and maintenance ee E eee Re ee E E E TETEE 2 Common Problems omeni es isuri cee nee ete see Ra E S 29 LED Indications teetreeeeesereeeeeeeeserssereecrsseesecrsorsseeseeeseesseceeersseesecrsersees 29 Warranty eeeeeeeeesseeerereeseeeerreesrressressrreesrererrreerrerrrrenrerrnrrererrenereerrree es 24 Ca Introduction FDU 2500 provides additional flexibility and convenience to your use of the Thuraya terminal Please note that Thuraya terminals are available separately from the local service provider FDU 2500 and its accessories are designed and manufactured to meet Thuraya s superior specifications and world class quality standards FDU 2500 enhances the capabilities of the Thuraya terminal to meet your communication requirements inside home and office The Thuraya terminal when used with FOU 2500 becomes a communication center providing voice fax and data communication The built in battery charger in FDU 2500 makes it possible for you to charge your Thuraya terminal while locked in the FDU Attention Do not connect FDU 2500 with other products such as PSTN or general telephone line O eo Introduction Package Contents tm FOU 2500 Package consists of the following Package Contents E 2 2 ep G Cc
7. the dial tone 3 Dial the destination number on the Extension phone keypad 4 Press on the Extension phone keypad as the last digit Note To make the call from the Extension phone you must dial as the last digit after the destination number In this case Thuraya terminal will call 5 seconds later and in the case of dialing xas a last digit Thuraya terminal will call instantly handset gt Ending a Private Call 1 Place the Auxiliary handset on FDU 2500 a fe 3 SS D amp q D am Transferring Calls Calls can be transferred between the Speakerphone Auxiliary handset and Extension phone once the call has been established gt Speakerphone to Auxiliary conference call to privacy mode 1 Pick up the Auxiliary handset The call will be routed to the auxiliary handset gt Auxiliary handset to Speakerphone privacy mode to conference call 1 Press the Speakerphone button on FOU 2500 2 Ensure speaker phone LED blinking then place the Volume Control You can control the volume of the Speakerphone auxiliary handset and ringer tone using the Volume Up and Volume Down buttons on FOU 2500 gt Adjusting auxiliary handset volume 1 Pick up the Auxiliary handset 2 Press the Volume Up Volume Down button repeatedly to increase decrease the auxiliary handset volume as required gt Adjusting speakerphone volume 1 Switch ON the speakerphone 2 Press the Volume Up Volu
8. 500 turns Green Speakerphone LED is flashing Incoming call indication is illuminated button is illuminated 23 a C 2 O a LU a Warranty Limited Warranty FDU 2500 This Limited Warranty is provided to the original purchaser of FDU 2500 This Limited Warranty is non transferable in nature Warranty Coverage and Service APSI warrants all new FDU 2500 terminals to be free from defects in material and workmanship under normal use and wear for a period of one year 1 year from the date of purchase If under normal use the product becomes defective in materials or workmanship and is returned to an APSI Authorized Service Center during the warranty period the product will be repaired or replaced at no charge to the purchaser The purchaser shall be required to provide reasonable proof of the date of purchase of the Product Repair or replacement of the Product is subject to APSI System Design s sole and exclusive option Reconditioned replacement components parts units or materials may be used if the Product is repaired or replaced Cost incurred in the removal de installation or reinstallation of the Product are not covered This Limited Warranty will be void in its entirety if the Product is serviced by anyone other than APSI or an APSI Authorized Service Center The User s sole and exclusive remedy shall be repair or replacement of the Product APSI neither assumes nor authorizes any A
9. Pa Table of contents Introduction Meee 3 Package ContentSs etsesseseeeeeseresereeresresseseeessseseresereeseossereoeeeesereeereeeeere 4 Installation InstructionS isieeeeseeeeeeeeeeeeessseeessesessesseseeesesseseesesesesesereseeese 5 Antenna Installationcr ccc crr cere re rete eee renee teen cee cee cence cee ees 5 Installing Satellite Antennaccrccrccer creer ce ctr e eee e cette en cee cee cee eee cee eee 5 Installing GPS ANtennacrrrrr crc crr cere tee eee eee ee eee cee ee cee ees 6 External Accessorjes corcrr terre terete teen een e eee cee n ee cee eee cee nee nes 6 Getting Started srr cr rrr crete cet cee eee cee e ee eee cee cee cence cee cee neces nee cee cee eee nee T7 Connection INTELfACE sr srr rrr rere eee ee ee eee tee eee teen ee cee ees 7 Setting up FDU 2500 rtssesssssessoresereesereesereeoseseseesorersereeserese 8 Using FDOU 2500 asa desktop UNI tecc cre creer e cee eect cee cee cence ees 8 Using FDU 2500 as a wall mounted UNitrrrrrr rere rete teens 8 Mounting FDU 2500 ON the Wallerrcrr cre cc erect tere ete e cee eee ee tee ees 8 Connecting Satellite Antennacrrccr cer re rect cece e reece cee cee cee c ee eee 8 Connecting GPS ANtennacrrrrr cre rrr cere ree rete eee ee eee eee ee cee ces 9 Connecting FOU 2500 to Power Supply Adapter essees 9 Connecting Extension Phone to FDU 2500 satssnsssseeecner ste gJ Connecting Group 3 Fax Machine to FDU Z2500 sersesssses essere 10 Connecting a PC fto FOU 2500 Through USB popietes isss 10 Docki
10. SB or DTE interface of FDU 2500 gt Important For sending receiving fax through PC you must have appropriate fax software installed in your PC Note While sending fax through PC connected at the USB or DTE interface the fax software should be configured in the class 2 0 mode gt Receiving Fax 1 Dock Thuraya terminal in FDU 2500 2 Connect the PC to the USB or DTE interface of FOU 2500 3 Switch ON FDU 2500 Activate the fax software 5 If there is no group 3 fax machine present at the RJ 11 16 interface of FDU incoming fax calls will be received by the PC connected at the USB or DTE interface gt Sending Fax 1 Dock Thuraya terminal in FDU 2500 2 Connect the PC to the USB or DTE interface of FDU 2500 3 Switch ON FDU 2500 Invoke the PC fax software 5 While configuring the fax software select fine as a resolution 6 Enter the destination number E g 12345678 7 Select the document file to be sent 8 Use the appropriate option in the fax software to send the fax Note No need to dial 32 after the destination number while using fax on the PC Receiving Sending Data Calls Use FDU 2500 for receiving and making data calls You can do this through a PC connected at the USB or DTE interface To receive make data calls by a PC appropriate data communication software should be installed in the PC Receiving Data Calls The PC connected through USB or DTE int
11. U 2500 3 Press the Eject button Releasing Thuraya terminal 11 5 fe 3 S D amp q D am M Receiving Making Calls You can receive and make calls using FDU 2500 Make sure that all these conditions are met before Making Receiving a call 1 FDU 2500 is switched ON 2 Thuraya terminal is switched ON 3 SIM card is valid 4 The connections are done properly as given in this manual 5 Thuraya terminal is in SAT only mode and data link rate is set to 19200 Baud 6 Turaya terminal is docked in FDU 2500 and shows Fixed Adapter for few of seconds and then show the GPS location It may not show if GPS location is gt Receiving Calls The incoming calls to FOU 2500 is indicated by 1 Ringing tone in the speakerphone and extension phone 2 Flashing of the Speakerphone LED on the top of FDU 2500 You can accept incoming calls at the Speakerphone Auxiliary handset or Extension phone Note The Speakerphone LED will remain ON if 12 displayed 7 Adequate satellite signal strength that is shown in the Thuraya terminal display gt Important When FDU 2500 is switched on it would take upto ten seconds to reach the normal working condition FDU 2500 is functional only when Thuraya terminal is docked For all operations Thuraya terminal should be docked into FDU 2500 FDU works only in the Thuraya satellite mode Therefore the setting in the menu of the Th
12. cessary arrange for service E FDU 2500 should be switched ON indicated by Fixed Adapter message on Thuraya terminal for few seconds and power charging LED on FDOU 2500 E Connections are not proper and firm Unable to make receive Check the PIN Code calls Dial through Thuraya terminal if OK then check the RJ 11 connection f Extension Phone is not working try with Auxiliary Handset of FDU 2500 and confirm it s working If you can make a call with the auxiliary handset of FOU 2500 then check Extension phone else call the service provider The auxiliary handset not Check whether the auxiliary handset is working connected properly Speakerphone not working Make sure that the speakerphone is ON Select appropriate volume level 22 Unable to send receive Check the PIN Code fax through RJ 11 Check and make sure that the RJ 11 interface is connected properly Check whether the fax machine is switched ON Check whether the fax machine is functional Unable to Send Receive Make sure that you have appropriate PC Fax fax through PC software installed in your system for receiving fax through PC Check parameters on the fax software that you are USING Unable to receive the Make sure that the group 3 fax is in the auto fax through RJ 11 response mode Y LED Indications FDU 2500 is Red FDU 2500 Is Red Thuraya terminal battery is charging FDU 2
13. e SIM card n Personal Computer PC for Data transfer and PC Fax 3 Drill holes of adequate depth on the surface 4 Keep the antenna in place so that the drilled holes and the screw holders are matched 5 Fix the antenna securely using the screws provided 6 Connect the free end of the attached cable to the GPS antenna connector marked GPS on the FDU 2500 3 Group 3 Fax machine for sending receiving Fax FAX software for PC Fax oe Extension phone Note The RJ 11 cable should be 2 wire inner at both ends Pa Getting Started FDU 2500 is intended to be used as a desktop or wall mounted phone while the Thuraya terminal is docked Slots are provided at the base of the unit to allow FDU 2500 to be hooked securely to a wall Interfaces for connecting external equipments such as Group 3 fax machine and PC are provided at the back side of the unit Connection Interface SAT ANT GPS ANT USE JACK POWER JACK EXT PHONE FAX PHONE CTE LOCKER DEVICE EJECT BUTTON O aD T ep E 09 So POWER LED BATTERY LED MUTE BUTTON SPEAKER BUTTON VOLUME DOWN VOLUME LP MIG Ke an prar ep 5 09 O gt Setting uo FDU 2500 Using FDU 2500 as a desktop unit To use FDU 2500 as a desktop unit find an appropriate location on your desktop where you can easily access the unit Make sure that you have an electrical outlet nearby for
14. er earing the beep which indicates that the PIN Code is successfully disabled gt How to Change the PIN Code 1 Connect the extension phone to RJ 11 interface marked EXT on the FDU 2500 Pick up the extension phone handset 2 Press gt Old Code gt x New Code 4 digit gt x ex 1234 5678 3 Hang up the phone after hearing the beep which indicates that the PIN Code is successfully changed gt How to make a call Calling Methods with PIN Code disabled Voice Call EXT interface Telephone Number FAX Call FAX interface FAX Number gt gt 82 gt gt Start Button PC FAX S W FAX Number Data Call USB interface Running PC S W Data Call Number DTE interface Running PC S W Data Call Number FAX interface Running PC S W Data Call Number gt gt 31 gt Code Locking Function Calling Methods with PIN Code enabled Voice Call EXT interface PIN Code gt Telephone Number gt FAX Call FAX interface PIN Code gt FAX Number gt gt 32 gt gt Start Button PC FAX S W FAX Number Data Call USB interface Running PC S W Data Call Number DTE interface Running PC S W Data Call Number FAX interface Running PC S W PIN Code gt Data Call Number gt gt 31 gt 19 n the case of Forgetting the PIN Code If you forget the PIN Code that you set should remember the PIN Code you set up you should reset your FDU 2500 by up and wr
15. erface to FDU 2500 To receive a data call on the PC appropriate data communication software should be running e g Hyper terminal default program available on Windows OS 1 Dock Thuraya terminal in FDU 2500 2 Connect PC through USB or DTE interface 3 Switch ON FDU 2500 gt Sending Data from PC 1 Dock Thuraya terminal in FDU 2500 2 Switch ON FOU 2500 3 Invoke the data communication software in your PC 4 Dial the destination number as shown below Note The baud rate of PC data communication software should be set up the 19200bps Baud rate of PC data communication software should be set to 19200bps both in sender and recipient s PC 4 Invoke the data communication software 5 You will hear a special signal tone in Thuraya terminal when a data call is coming through 6 The data will be received by the communication software Look up the S W guide book for the specific explanation E g ATDT 12345678 5 Select the data file to be sent 6 Use appropriate options in the data communication software to send the file now Look up the S W guide book for the specific explanation P Charging Thuraya Terminal Battery FDU 2500 comes with a built in battery charger for charging the Thuraya terminal When the Thuraya terminal is docked and the Power Supply is switched ON the 17 FDU will start charging the battery The charging status will be indicated by the red LED on top of FDU 2500 Once t
16. f FOU 2500 For sending fax through PC your PC should have appropriate PC Fax Software installed Receiving Sending Fax through Fax machine gt Receiving Fax 1 Dock Thuraya FDU 2500 2 Switch ON FDU 2500 3 Switch on group 3 fax machine that is connected to the RJ 11 interface marked FAX on the terminal in FDU 2500 Note A ring tone in the fax machine indicates an incoming fax call gt Sending Fax 1 Dock the Thuraya terminal in 15 FDU 2500 2 Switch on the group 3 fax machine connected at the RJ 11 interface of FOU 2500 and place the fax sheet on the fax machine 3 Switch ON FDU 2500 4 Dial the destination number followed by 5 Dial the Data connection speed number with a call type number followed by 6 Press Fax start button a N o D x E g 12345678 32 then FAX Start button The fax will be sent now You must press the fax start button after entering the second gt Important The two digits dialed between the two s indicate the following First digit 1 2 or 3 will indicate the fax connection speed 1 indicates 2 4 Kops speed 2 indicates 4 8 Kops speed 3 indicates 9 6 Kbps speed Second digit 1 or 2 will indicate the call type 1 indicates data call 2 indicates fax call amp Receiving Sending Fax through PC You can send receive fax through a PC connected to the U
17. he Thuraya terminal is fully charged the DEICROGIIR gt ab Har 40 i z E ab BATT LED will turn to green Pa Code Locking Function Extension phone is used for code locking function which is supported by FDU 2500 This code locking function is operated by entering passwords This function is not for Thuraya terminal connection but for FDU 2500 which has the code locking function How to set up the Code Locking Function The PIN Code of FOU 2500 is set to 0000 as a default gt How to enter the PIN Code 1 Connect the extension phone to RJ 11 interface marked EXT on the FOU 2500 Pick up the extension phone handset 2 Press 0000 gt gt New Code 4 digit gt ex 0000 1234 3 Hang up the phone after hearing the beep which indicates that the PIN Code is successfully changed gt Enable PIN Code Locking Function 1 Connect the extension phone to RJ 11 interface marked EXT on the FDU 2500 Pick up the extension phone handset 2 Press User Code gt x ex 1234x 3 Hang up the phone after hearing the beep which indicates that the PIN Code 18 is successfully enabled gt Disable PIN Code Locking Function 1 Connect the extension phone to RJ 11 interface marked EXT on the FDU 2500 Pick up the extension phone handset 2 Press User Code gt x ex x 1234 3 Hang up the phone aft
18. ife of design and craftsmanship and should be electronic devices damage batteries 2 treated with care The following and warp or melt certain plastics S suggestions will helo you to fulfill any 2 warranty obligations and allow you to Do not attempt to open it Mishandling of D enjoy this product for many years the device may damage it 2 fe Do not use or store FDU 2500 in dusty E dirty areas Do not drop apply pressure or shake it Rough handling can break internal circuit Do not store it in hot areas High boards 21 Do not use chemicals cleaning solvents or strong detergents to clean it Wipe it smoothly with a soft cloth Do not paint it Paint can clog the device s moving parts and prevent oroper operation Use only the supplied or an approved replacement antenna Unauthorized antennas modifications or attachments Common Problems a Thuraya terminal is undocked properly m Thuraya terminal not in SAT Only mode m Thuraya terminal is switched OFF m There is no enough satellite signal strength indicated in Thuraya terminal display There should be minimum two bars present Otherwise adjust the antenna properly m The SIM card is invalid could damage the phone and may violate regulations regarding radio devices If the phone battery charger or any accessory does not function properly take it to your nearest Authorized Service Center The personnel there will assist you and if ne
19. ite it down in a safe place visiting the service center So you r supplementary Services There are a host of supplementary Set these functions using Thuraya services supported by the Thuraya terminal terminal which are also supported by FDU 2500 20 C Troubleshooting Warnings gt Servicing an authorized service provider FDU 2500 does not contain consumer serviceable components You are gt General advised not to carry out any kind of troubleshooting In case you face any E Do not place the FDU 2500 in problems contact the nearest service a wet area center Only authorized service person a Do not expose FDU 2500 to can repair the equipment temperatures greater than 55 Celsius or less than 0 Celsius gt Antenna E Do not expose FDU 2500 to Use only the antenna and cable that has moisture dust etc been specifically designed for your E Avoid placing FDU 2500 close FDU 2500 Unauthorized antenna cable to open flames or any source and cable length modifications or of heat attachments could damage FDU 2500 Do not expose FDU 2500 to and may violate the relevant regulations direct sunlight causing loss of performance and radio Do not disassemble FOU 2500 frequency RF energy above the this will void your warranty gt recommended limits If your FDU 2500 s Ro antenna gets damaged please take it to D S Q 5 m Care and maintenance op FDU 2500 is a product of superior temperatures can shorten the l
20. me Down button repeatedly to increase decrease the speakerphone volume as required Auxiliary handset on the cradle gt Speakerphone to Extension 1 Pick up the Extension phone handset gt Extension phone to Speakerphone 1 Press the Speakerphone buttonon FDU 2500 2 Ensure speaker phone LED blinking then place the extension phone on the cradle gt Adjusting ringer tone volume 1 Switch ON FDU 2500 2 Press the Volume Up Volume Down button repeatedly to increase decrease the ringer tone volume as required You can listen to the tone as you do this and can adjust the volume as required Muting Microphone during Speakerphone Call You can mute the microphone during a Speakerphone call by pressing the Mute button You will be able to hear the caller at the other end but he she will not be able to hear you Note Whenever a call is muted the red mute LED on FDU 2500 will glow steadily gt Muting a speakerphone call To mute a Speakerphone call 1 Press the Mute button on FDU 2500 once Note If you pick up the Auxiliary handset now the call automatically will be unmuted and routed to auxiliary handset gt To unmute the call 1 Press the Mute button again C Receiving Sending Fax Message You can use FDU 2500 for receiving and sending fax messages This can be done either by a group 3 fax machine connected to the RJ 11 interface or through a PC connected at the USB or DTE interface o
21. ng Thuraya Terminal in FDU 2500 sssemanssassiertascaeress 10 Unaocking Tnuraya Terminal Trom FDU 2500 rsereresee oeeeneeys 11 Receiving Making CallScrrccr ccc cre cere cette cence cee cee cee ences cee cee cee eee cee ene cee 12 Important eee er eee ee ee eee eee eee eee eee eee ee eee ee eee eee ee ee ee ee eee 12 Receiving Callg seeerereeseesereesoresssreseereserseoresoreesorereereseereeeresere 12 Making Callg eo 13 Ending fel Ie 13 Transferring Callg corre cre ce crete eect tee cee cee ence eens cen e ee eee cee cen neeneeees 14 Volume Control MRR 14 Muting Microphone during Speakerphone Call sessseereseeseeseereens 15 Receiving Sending Fax Message Coe eee eee reece eee eee cee eee eee eee cee eee eee esses eenees 15 Receiving Sending Fax through Fax machine srr 15 Receiving Sending Fax through i Qe 16 Receiving Sending Data Calls TE Oe A EEL RR ee I ee Re S 17 Receiving Data Calls ELEELE TTSA e T TEET ETET 17 Sending Data from PC URIK EKEEEKESK EAE AREN AERAN ols ase inG Siete dreds aieleaie ERENER T Charging the Thuraya Terminal Battery E E E E E T Code Locking Function ere E ee ee E E eae eee 18 HOW tO Sel UD The OOS IOCKING TUNE TION eienenn st eeki 18 How to make a call ETE LEE EEE LTO AA e E E EET 19 In the case of Forgetting the PIN Code DEEANN IAS AAEREN othe laters ude Siete eters 20 Supplementary Services crrrerecrceecee cet eeestecee teense cence eee nee eee ee eens eee cence a ees 20 Troubleshooting crrreetee
22. uraya terminal s system preference must be set to SAT only for details refer to Thuraya terminal user manual the call was not attended gt Accepting Calls from the Auxiliary Handset 1 Pick up the Auxiliary handset gt Accepting Calls from the Speakerphone 1 Press the Speakerphone butt on gt Accepting Calls from Extension Phone 1 Pick up the handset of the Extension phone gt Making Calls You can use the FDU 2500 for making outgoing calls Make sure that FDU 2500 is activated before proceeding with the call gt Calling from the Speakerphone Calls from Speakerphone can be made by 1 Dial the destination number using Thuraya terminal keypad 2 Press Call button on Thuraya Terminal gt Calling from the Auxiliary Handset Calls from Auxiliary handset can be made by any of the following method Method 1 1 Pick up the Auxiliary handset 2 Wait for the dial tone 3 Dial the destination number using the Thuraya terminal keypad 4 Press call button on Thuraya terminal Ending Calls gt Ending a Speakerphone Call 1 Press the Speakerphone butt on gt Ending Calls From Extension Phone 1 Place the Extension phone 13 Method 2 1 Dial the destination number using Thuraya terminal keypad while the Auxiliary handset is on the cradle 2 Pick up the Auxiliary handset gt Calling from the Extension 1 Pick up the handset of the Extension phone 2 Wait for
23. uthorized Service Center or any other person or entity to assume any other obligation or liability beyond that which has been specified in this Limited Warranty Limitation of Liability All liability and obligations of APSI under this Limited Warranty shall terminate on the completion of the warranty period of one year calculated from the date of purchase of the Product by the original purchaser The purchaser shall fill in the warranty card attached in the User Manual and get it duly stamped and signed by the Dealer as proof of purchase This limited warranty sets forth the entire responsibility of APSI with respect to the product There are no other liabilities of APSI arising from the sale of the Product whether based on warranty contract negligence or any other theories of liability This Warranty does not cover the following APSI will not be responsible for products or accessories not manufactured or provided by APSI APSI will not take responsibility for the failures caused by misuse accident alteration or neglect removal or repair neglect or failure to follow instructions as to installation and maintenance fire flood or other natural calamities APSI will not guarantee the performance of the Product when used in combination with other products or equipment 24
Download Pdf Manuals
Related Search