B series DVR User's installation and operation Manual
Contents
1. 4 The region shelter or channel protection is set 5 The user has no surveillance authority 6 The real time image of the hard disk recording machine itself is not clear 15 Network connection is not stable Possible reasons 1 Network is not stable 2 IP address conflict 3 MAC address is conflict 4 The net card of the DVR Is bad 16 There is something wrong with the USB backup or writing to a CD Possible reasons 1 The rewritable CD drive and the hard disk share the same data lines 2 The data file is too large stop recording and backup 3 The data exceeds the backup storage limit 4 The backup equipment is not compatible 5 The backup equipment is damaged 17 The keyboard cannot control the DVR 54 EVOLVE Detective Possible reasons 1 The serial port of the DVR is not set correctly 2 The address is not correct 3 When multiple transformers are connected the power supply is not large enough Please give each transformer an individual power supply 4 The distance is too far 18 The remote control is not working Possible reasons 1 The remote control address is not correct 2 The remote control distance is too far or the angle is too large 3 The batteries are low on power 4 The remote control IR on the front panel of the DVR is damaged 19 The storage time is not enough Possible reasons 1 The hard disk capacity is too small 2 The hard disk is damaged 202. EVOLVE Detective MENU A en INSTRUCTION MANUAL EVOLVE Detective Welcome This manual is designed to be a reference tool for the installation and operation of your system you can find information about the DVR features and functions as well as a detailed explanation of the menu trees Before installation and operation please read the following safeguards and warnings carefully Important Safeguards and Warnings Do not place heavy objects on the DVR Do not let any liquids spill onto or into the DVR Please ensure fans and vent openings are not blocked and that the unit is placed in an area with adequate air circulation Do not try to disassemble or replace components other than the installation of the hard disk drive Environment Please place and use the DVR in an area that can maintain a temperature range of 0 C to 40 C 32 F to 104 F Avoid placing the DVR in direct sunlight and keep away from any heat source Do not install the DVR in a damp environment Do not use the DVR in a smoky or dusty environment Please ensure that the DVR is placed on a level and stable workplace Please install it in a well ventilated area and please keep all vents clean and clear Use only the AC adapter included with your DVR and within the voltage ratings noted on the adapter EVOLVE Detective Directory tajo Ble i ol amd Ta ideo Veo A me emcee RET P NE ann REE eee FREE Ott ta E oer oe ane eee 1 te PROC
3. Left Deflate Right Deflate Picture 4 17 Output Adjust 4 6 Advanced Configure advanced parameters Alarm Set Version Motion Detect Mobile Monitor Auto Maintain and Network 4 6 1 Alarm Set Alarm functions include HDD Loss Disk No Space Show Video Loss Mail Video Blind and Alarm Management 36 EVOLVE Detective HDD Loss Disk No Space Show Video Loss oFF OFF ON Video Blind Alarm Management Picture 4 18 Alarm Set According to your configured parameters when an event occurs the device will alert you by displaying a message sounding a buzzer and or sending an email 4 6 1 1 Mail If the alarm is turned on an email regarding alarm information will be sent to all appointed addresses Enable EVOLVE Detective Picture 4 19 Email SMTP server Email server address It could be an IP address or domain name Domain name can Port Email server port number be translated only if the correct DNS is configured SSL Requires Secure Socket Layer protocol to login User Name Email server user name Password Input users corresponding password Sender Alarm notice sender s email address Receiver Email address of appointed receivers when the alarm is turned on You can set a maximum of three receivers Title The name you assign for the alarm notification that is sent 4 6 1 2 Video Blind When the video image is obscured by the environment such as exc
4. Log In User default mele save system stal2011 8 11 08 14 save system stal2011 8 11 14 34 Remove Cancel 44 EVOLVE Detective Picture4 26 LOG logout Quit the menu and password is required for next entry shutdown Quit the system Power off DVR reboot Quit the system Reboot system 4 6 6 PTZ Configure Channel CH1 CH2 Parity None v Address Picture 4 27 PTZ Configuration Channel Choose the dome camera input channel Protocol Choose the corresponding dome protocol PELCOD as an example Baud rate Choose the corresponding dome baud rate length You can control the PTZ and division Default 115200 Data bits Include 5 8 options Default 8 Stop bits Include 2 options Default 1 Parity Includes odd check even check sign check blank check Default void Address Set as the corresponding dome address Default 1 Note The address must be consistent with the dome address Note Clicking the Default button will replace all configurations with default settings 45 EVOLVE Detective 4 6 7 Network Network setup includes Static IP DHCP PPPoE DDNS UPNP ETC Static IP Type StaticIP_ A Media Port Web Port IP Address 192 168 1 234 subnet Mask 255 255 255 O Gateway 192 168 1 1 Primary DNS O 0 0 Secondary DNS Picture4 28 Network Type select Static IP mode TCP Media port Default 34567 HTTP Web port Default 8
5. M channel number time hour capacity in an hour M hour The recording time formula is Recording time hour overall capacity M Capacity in an hour M hour channel number The DVR introduces the H 264 compression technology lts dynamic range is very large so the hard disk capacity calculation is based on the estimation values of each channel creating files in an hour Example For one 500G HDD real time CIF for recording it will keep recording for about 25 days HDD spaces per channel are 200M H if 4channels real time CIF at 24hours recording uninterrupted it can last 500G 200M H 24H 4ch 26 days 59 EVOLVE Detective Appendix 4 Technical Specifications Main processor High performance embedded microprocessor Operation system Embedded LINUX operation system System resource synchronous multi channel recording synchronous multi channel System sub code stream synchronous multi channel playback synchronous network operation Operation interface 16 bit true color graphical menu interface mouse operation supportive Interface display 1 4image display 1 4 8 9 image display 1 4 8 9 16 image display Video standard PAL 625line 50 f s NTSC 525 line 60 f s Surveillance image PAL D1 704x576 NTSC D1 704x480 Video quality Playback image PAL D1 704x576 NTSC D1 704 480 quality Recording speed 100 120fps D1 200 240fps CIP 400 480fps CIF 50 60fps D1 Motion
6. 1 Record Set the recording parameters in the surveillance channel The system is set to 24 hours consecutive recording with the initial startup You can modify by entering main menu gt record gt record to set Note There must be at least one read write hard disk installed for this to function refer to chapter 4 4 Channel E JE m lk O Tio L ha No al Resolution T Frame Rate T o ETENE T EIEI T EIEI Quality Audio Ol a te apa a MiS REE i O oO am El i O O ae i KI O T T E O TI T E3 i 7 al a REC Mode Record Conf REC Size 5 Region Cover Picture 4 1 Record 24 EVOLVE Detective Channel Choose the corresponding channel number to set the channel Choose the All option to set every channel Resolution Set the resolution D1 HD1 CIF QCIF for each channel file CIF is default value Frame Rate Set the frame rate of each channel 25 is default value 0 to 30 for NTSC Quality Set the quality of each video channel Good is default value worst worse general good better or best Audio Set the audio status of each channel ON is default value REC Size Set the time length of each video file 60 minutes is default value 1 to 120 min REC Mode Refer to chapter 4 3 2 Region Cover Refer to chapter 4 3 3 Note Pressing the Default button will replace all configured settings to default settings 4 3 2 Record C
7. ESS ead duc EEN ENTER EEN 24 Aa TIR EC OA itera hao he e yg rianennannmanaranncinenerntensmenue tat stu 24 Ae RECORTO ONT cessa r ene Aen ee oc eet ee AS 25 A 3 3 TRCGION GOV AC PEE PP A Se EAE 26 BSI SE e a a EE E EN 27 AS SYSTEM SEUD A 28 AOA AOU O a A EET EET 28 A EET 29 AK SE ACCOUN RER RRISERERSERERER ERE REE RE ERE e e agro soot nen nate 30 AD A GUILDS 34 PA ee ee ec ee eee 35 e O Ne Lp O O PERRO SS A 36 AS A eS ERP NPT 36 ALMA A iia 37 EVOLVE Detective AG Aue VOGO BINO vere ie ies AA a 38 Ae Tto Alavi Management crni tt ba 39 AO PINE FS IO sti 39 AGS MOUOM DOCCT aa 40 72 So AO LE A EE O el AP A Pe SE BER eE 42 AA ae Rate oe eae hos oe sre anamnese oe eats 45 e oe 46 SPA Grand Maine Nae pt A eeteuamsaaectweauecnen eSse See ee 51 A A ee isew ese eso se ores ete 51 9 2 M nen E esn a 55 ADENO T MCMOIE COMTOLOPErAU ON tii SEER O E ER N 57 ADDOCNGIX 2 Mouse operatoron aor nonn r R AARTE 58 Appendix s Hard disk Capability calculat On sericea RRR eee 59 Appendix 4 Technical SpecificatiONS ccccococoocccccnnnccnnccononncnnnnnnnononnnnncnnnnonononnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnas 60 EVOLVE Detective 1 Production Introduction 1 1 Product overview This series DVR is designed especially for security purposes which makes it an outstanding digital surveillance product It introduces an embedded LINUX operating system which is more stable It introduces the standard H 264mp video compressed
8. Line scan button Preset border Tour Interval Picture 3 15 Boundary Scan Setup 2 Boundary Scan Calls Click the Page Shift button refer to Picture 3 10 to enter the PTZ control menu as shown in Picture 3 12 Input the number of the Boundary scan in the value blank and click the Auto Scan button the PTZ will begin working using the Boundary setup Click the Stop button to stop the scan 5 Horizontal Rotating Click the Horizontal Rotating button and the PTZ will rotate horizontally relative to the original position of the camera Click the Stop button to stop 6 Rotate Click on the horizontal Rotating button and the PTZ will turn around 7 Reset Click PTZ restart and all data clears to 0 8 Page Switch Click Page Switch button refer to Picture 3 10 and enter setting auxiliary function refer to Picture 3 16 The Auxiliary number corresponds to the auxiliary switch on the decoder 19 EVOLVE Detective Direct Aux Ope Cight Aux Num Oper Cancel Picture 3 16 Auxiliary Function Control Direct Auxiliary Operation Choose auxiliary equipment select Open or Close button or switch control Auxiliary Number The operation of the corresponding auxiliary switch according to the PTZ agreement Page Switch Click the Page Switch button and return to PTZ Main Menu refer to Picture 3 10 the menu itself can be controlled by the menu control buttons 3 3 5 Tour setup Set the patrol displ
9. The downloaded files cannot play Possible reasons 1 There is no media player 2 There is no DX8 1 software or higher edition There is no DivX503 Bundle exe file to play AVI video files The DivX503 Bundle exe and ffdshow 2004 1012 exe files must be installed in the Windows XP system 21 cannot remember the advanced code or network code in the local menu operation Please contact your local IP service 5 2 Maintenance 1 Please ensure the system is grounded to prevent video or audio signal interference and the DVR from static or inductive electricity 2 Donot disconnect the video signal line RS 232 port or RS 485 port with the power on 55 EVOLVE Detective 3 Do not connect a TV to the local video output port VOUT of DVR It will damage the video output circuit Do not turn the power switch off directly Please use the shutdown function in the menu or click the turn off button in the panel to protect the hard disk Please keep the DVR away from heat resource Please keep the DVR ventilated for better heat radiation Please check the system and maintain regularly 56 EVOLVE Detective Appendix 1 Remote control operation Multi window Split screens button button ME Numeric button Code input number input channel switch Direction button Up Down Left Right and Enter Menu button Record Playback Control recording playback control 6 Record mode Enter short menu as
10. any files already backed up can be played back individually Cancel Picture 3 8 detect storage device Detect Detect the storage device connected to the DVR such as hard drive or USB drive Erasure Choose the file to delete and click erase to delete the file Stop Stop the backup Backup Click backup button and a dialog box will open You can choose the backup file according to the type channel and time 12 EVOLVE Detective Type Al Channel 1 Start Time 2011 08 11 00 00 00 End Time B 2011 08 11 15 35 19 04 O Channel File Name 01 2011 08 11 00 00 00 01 00 00 R h264 5150 2 01 2011 08 11 01 00 00 02 00 00 R h264 5106 3 01 2011 08 11 02 00 00 03 00 00 R h264 5138 4 01 2011 08 11 03 00 00 04 00 00 R h264 5154 Required Remailning 50 08 MB 1 66 GB Picture 3 9 recording backup Remove Clear file information Add Show file information meeting the set file attributes Start Pause Click the play button to start the backup and click the pause button to stop the backup Cancel During backup you can exit the page layout to carry out other functions Playback control Refer to the following sheet for more information ETSE SCIE o0 m m m m l eo CORA AI CORA EII i Next file e Circulation a BE BEEN Table 3 2 Playback control key Note Frame by frame playback is only performed in the pause playback state 13 EVOLVE Detective Hint You can display the function b
11. connected to low impedance earphones speakers or other audio output equipments through a power amplifier If the speakers and microphone cannot be isolated feedback often occurs The following are some suggestions to help correct this issue 1 Use a higher quality microphone 2 Adjust the speaker volume to be under the threshold that produces the feedback 3 Use materials that will absorb the sound and reduce reflection of the sound 4 Adjust the layout of the speaker and microphone 2 7 PTZ connections 1 PTZ decoder connections 1 The grounding of a PTZ decoder and DVR must be shared otherwise the common mode voltage 5 EVOLVE Detective could result in PTZ control failure shielded twisted pair cable is recommended 2 Avoid high voltage connections and use surge protectors 3 When connecting use 1200 resistance paralleled to ensure the signal quality 4 The 485 AB lines of DVR cannot be connected with other 485 output equipment that is paralleled 5 The voltage between the AB lines of the decoder must be less than 5V 2 Front equipment grounding note Incorrect grounding can result in damage to the unit 3 PTZ input type unlimited Parameter 4851 A 4851 B 485communication interface which is connected with the recording control equipments such as the decoder 2 8 Speed dome connections 1 Connect the 485 lines of the speed dome with the DVR 485 interface 2 Connect the video line to the DVR video inp
12. format and G711A audio compressed format which ensures the highest quality image low error coding ratio and single frame playing It utilizes TCP IP network technology which achieves the strongest network communication and telecommunication ability This DVR can be used individually or online as part of your safety surveillance network and with the included professional network video surveillance software it can help you to maintain a strong communication and telecommunication network 1 2 Main functions Real time surveillance Analog interface and VGA interface VGA interface is equipped selectively Surveillance function through monitor or display Data Storage User selected motion activated hard drive sleep and wake functions to extend storage capacity and extend life span Special storage format which insures data safety Compression Real time compression by individual hard drive which insures the audio and video signal synchronization and stability Backup Through SATA and USB interface and also through Internet download Playback Individual real time video recording as well as search playback network surveillance recording check and downloading EVOLVE Detective Multi playback mode Internet operating Internet surveillance in the real time PTZ control Recording check and real time playback Communication interface RS485 interface for PTZ control Standard Ethernet network interface with RJ
13. record mode button Input the number of DVR to control Search record files to playback 57 EVOLVE Detective Appendix 2 Mouse operation The USB ports support mouse operations NOTE Units with front and rear mouse USB ports can only utilize one port at a time if a USB device is connected to one of the ports the other is automatically deactivated The bottom rear USB port is designated for USB backup drives Bo a Double click one item in the file list to playback the video Double left click Double click the playback video to zoom in or out Double click the channel to make it display full screen Double click again to resume the multi window display Left click Choose the associated function in the menu Open the desktop shortcut menu in a preview state Right click Current shortcut menu in the main menu Add or subtract number in the number setting Press middle Switch the items in the combo box button Page up or down in the list Choose the widget or move the item in the widget Set the motion detect area Drag mouse Set the cover area 58 EVOLVE Detective Appendix 3 Hard disk capability calculation Verify the following when installing the hard drive in the DVR for the first time 1 Hard disk capacity There is no limit for recording machine We recommend 120G 250G sizes to keep better stability 2 Overall capacity option The hard disk capacity formula is Overall capacity
14. 0 IP address Set the IP address Default 192 168 1 10 Subnet mask Set the subnet mask code Default 255 255 255 0 Gateway Set the default gateway Default 192 168 1 1 DNS setup Domain Name Server It translates the domain name into an IP address The IP address is given by network provider The address must be set and the system rebooted to become effective DHCP Get the IP address from the router automatically 46 EVOLVE Detective Type DHCP Media Port 34567 Web Port 80 Primary DNS O 0 secondary DNS 0 0 Picture4 29 DHCP Typel select DHCP IP mode TCP Media port Default 34567 HTTP Web port Default 80 DNS setup Domain Name Server It translates the domain name into IP address The IP address is given by the network provider The address must be set and the system rebooted to become effective 47 EVOLVE Detective PPPoE Type Media Port Web Port User Name Password Primary DNS 202 118 232 108 Secondary DNS Picture 4 30 PPPOE Inout the user name and password that ISP Internet service provider provides After saving reboot your system to become effective Then the DVR will build a network connection based on the PPPoE The IP address will change into a dynamic IP address after the above operation is successful Operation After the PPPoE dialup is successful the IP address IP address is obtain and entered as the current IP address and then u
15. 1 Main menu navigation recording look up recording play video file storage Set the recording configuration recording type recording Record time section HDD Set appointed hard disk as read write disc read only disc or redundant disc clear data resume date and so on Set system time data format and so on Account Modify user team or password Add user or team Delete management user or team management Set channel name video time color setting preview time configuration GUI display preview channel record status alarm status and so on Set resolution video standard tour time and output adjust Video and so on Return last lever menu send email or Show Message when alarm happening Display software version and build date Advanced System Set motion detect alarm channel sensitivity area linkage Motion parameters defending time section screen hint recording detection PTZ patrol Mobile Monitor Mobile Monitor Setup Automatic Set automatic reboot system system upgrade default maintenance settings log and so on 23 EVOLVE Detective PTZ Set channel PTZ protocol address baud rate date bit stop configuration bit and check Network Set basic network parameters DHCP PPPOE DDNS configuration parameter Return last lever menu et Exit main menu and display Monitor 4 2 Search Playback Refer to chapter 3 3 3 4 3 Record 4 3
16. 45 jack intelligent operations USB Mouse and backup copy paste functions 2 Open package check and cable connections 2 1 DVR package contents Please verify that there is not visible damage to the DVR and then verify the following e 4 channel H 264 DVR e AC Power Supply e Remote Control requires 2 AAA batteries not included e USB Optical Mouse e 4 Screws to Mount HDD e Installation CD e User Manual e Quick Guide 2 2 Hard disk installation Install SATA hard disk drives before completing the initial software setup The below images are just used to show how to install hard disk The DVR in the photos is not the DVR in the package EVOLVE Detective 1 Remove case screws 2 Remove cover 4 Connect SATA data cables 5 Install SATA power cables 6 Replace cover 7 Replace screws 2 3 Front panel IM OA ESC DVR Af 67 Digital kideo Aecorder 1 i 2 34 58 E 839 ot Gu 45 16 47 491920 21 1 IR remote receiver 2 Power indicator light 3 Previous file 1 4 HDD indicator light 5 Next file 2 6 PTZ 8 7 Slow play 3 8 HDD Info 9 9 Fast play 4 10 Backward pause 5 11 Record 0 12 Play Pause 6 13 Function switch 14 Search video 7 15 USB 16 ESC 17 Left 18 Up 19 Down 20 Menu Enter 21 Right EVOLVE Detective 2 4 Rear panel T 4 O 1 2 345 89 10 1 Video input 2 BNC output 3 audio input 4 audio output 5 USB Mouse 6 Network 7 P
17. EVOLVE Detective Auto Reboot System Every Tuesday 7 at 01 00 system Upgrade Default Settings Logout Picture 4 23 Auto maintain Upgrade Upgrade Position TT Upgrade fe SF Picture 4 25 Upgrade Upgrade Position Choose USB interface Upgrade file Choose the file which needs upgraded Note After Upgrade operation the DVR will reboot Default Settings The system restore to the default setup You can choose the items according to the menu 43 EVOLVE Detective Please select setting entries that you want to default Select all E General L Encode Record Conf CJ Alarm Set E O NetWork O NetService O GUI Display CO RS232 Account E O Picture 4 24 Restore Log Look up system log according to the set mode Log information includes system operation configuration operation data management alarm affair recording operation user management and file management ETC Set the time section to look up and click the look up button The log information will display as a list one page equals 128 items Click Page up or Page down button to search log and click Remove button to clear that log information Type Al r Start Time 2011 08 11 00 00 00 End Time 2011 08 12 00 00 00 dedos 2011 08 11 07 40 37 2011 08 11 07 58 04 2011 08 11 07 58 04 2011 08 11 14 34 30 2011 08 11 14 36 34 Log In User default Log save system stal2011 8 11 07 48
18. Point Settings Tour lines are connected by multiple preset points to set the preset points Step1 as shown In Picture 3 10 the Directional keys will turn the PTZ to any desired location and then click the Set button to enter that location Picture 3 13 Step 2 click the Tour button enter that value into the Tour Line and Preset Points blanks then click Add Preset Points button to complete the settings you can also add and delete Tour lines which have been previously set up Step 3 repeat steps1 and step 2 until all of the preset designated Tour points have been entered Remove Preset Input preset value in the blank click Remove Preset button to remove the preset points Remove Tour Line Input the number of the Tour line click Del Tour button to remove the Tour line setting 16 EVOLVE Detective Function Preset f Conn o Interval 3 Border ada Posi Del Preset Cruise Line Blank Picture 3 13 Tour between Points Settings 2 Call up Tour lines between Points Click the Page Switch button refer to Picture 3 10 to enter the PTZ control menu as shown in Picture3 12 Input the number of the tour line in the value blank then click Tour between Points button PTZ will begin to function according to the tour lines that are set Click the Stop button to stop touring 2 Scan The PTZ will work using the preset pattern line repeatedly 1 Scan setup Step1 As shown in Picture 3 10 clic
19. UCUOVSIVIS We etrrercn a a 1 WEM UNG LOIN ie lt a FESTE EEN SER SEE SENE JERES eenaeanaes 1 2 Open package check and cable connections ccccccsssseececcceeeececcceeeseeececauseeeeeseeauseceesssaageeeesssaaseeeess 2 Za DMA Da cade EO AES tata 2 22 Hara dl SK IAS MAIN AAA AAA 2 2 OUI amp lt a a a E 3 2 FAC AM AUN Stans as 4 PSP Ol CONMEMORAR 4 2 6 Audio and video input and output connections ssssseeeerree rr LEE ELLLER 5 2071 WIGEO INDUMCONMECHOMNS iii co 5 2 6 2 Video output connections and OPTIONS ooccccccccccncoconcnconancnnnonancnnnnoncnncononcnnnonanennnnnnnnnonanens 5 PA SBS AUO SINAN OU erii e eae bees 5 2 0 4 AUQIO SAA OU oa 5 2 DO Ca ome CONNECCION ni ii ran MEM ett ie feat ear eter enter near eed 6 9 BaSe OD CF AMO sears AA tala Cet Deel Duds ls tas REESE dit id 7 SEEREN ENE EET Pe nn 7 32 SY A e e oO E saaneaeseaesencencesesaaeseeecasancectecaseernatoe 8 DESK SONIC HAR MENU eiii E 8 A es ele ee ee ee ee 9 3 9 2 RECO MY Tore SERENE SES REESE RESEN ENES SEERE ERE RR 10 390 9 Se af CHEP AND ASKE oz EEN ee ee eee eee ee 10 O 14 3 3 9 TOU UN A A AA AAA A A ES 20 HSN oy Nilo AJUS inet amenesne nee einen eer emer eer anette ree eee ee eee ena ter at ee Deen ene ee nee 21 A A ORO ERES 21 A A reieiacseeseies oes eteee ees 22 ZA MaMe NU is aaa a aa a ee tt tte he ee 23 la Fe Ul na LE ale ae ANT e HS TI 9 en reer E AO 23 A2 SCAN GIVI AND AEK en 24 PDN 0 0 ESPE PAPA riders PIS tin CO tatoos SENER ESS
20. as reached the set sensitivity parameter the camera mask function will activate Channel Switch OFF r OFF QFF r OFF Region Cover MN Sy Sey RE Picture 4 3 Region Cover Channel Choose the corresponding channel number to set the channel Choose the all option to set every channel 26 EVOLVE Detective Switch You can select ON or OFF status for each channel Region Cover When this channel status as ON click Set and enter the area to be set The area has 4 regions and you can move the cursor to set the areas Note Pressing the Default button will result in all configured settings being replaced by the default settings 4 4 HDD Manage Configure and manage the hard disk The menu displays current hard disk information hard disk number input port type status and overall capability The operation include setup the write read disk read only disk redundant disk hard disk format resume default Choose the hard disk and click the right function button to execute Note Read Write Disk The equipment can write or read data Read only Disk The equipment can read data but cannot write data Redundant Disk Double backup the video files in the write read disk SAT 1 2 HDD Full Overwrite Type Capacity eft Capacit status 2 1 RRead Write 1 36 TB 1 36 TB Normal Format Disk Picture4 4 HDD Manage Format Disk Format the HDD which you selected and all data will lost Rec
21. ay There are two methods for you to play the video files contained in the hard disk 1 Using the desktop shortcut menu 2 Main menu gt System setup gt Video You can choose the single window four window nine window or sixteen window patrol display for a single display interval Set the patrol switch interval The set range is 5 120 seconds S Means turn off on the patrol 20 EVOLVE Detective 3 5 6 Audio Adjust Adjust volume regulate parameters You can use the desktop shortcut menu Volume regulate 100 Picture 3 17 Audio Adjust Volume regulate You can set the volume regulate value from 0 to 100 Advanced Will allow volume control for each channel E J al LJ y Select all U Channel Picture 3 18 Audio matches Channel You can match any or all channels which you want to adjust but only one audio channel output is valid at a time 3 3 7 Logout Logout by shutting down the system or by rebooting You can use the desktop shortcut to enter main menu 21 EVOLVE Detective Logout Shutdown Reboot Picture 3 19 Logout Reboot the system logout Quit the menu Requires password to logon shutdown Quit the system Power Off the DVR reboot Quit the system Reboot the system 3 3 8 Window switch Preview in a single window four windows eight windows nine windows sixteen windows according to your choice 99 EVOLVE Detective 4 Main menu 4
22. detect detect 4 8x8 detection areas multiple sensitivity Audio Bidrectional Talk Support Recording mode manual gt alarm gt motion detect gt timing 60 EVOLVE Detective And Playback Any channels playback multiple channels playback Playback ee mode Time searching calendar searching affair searching channel searching information searching Space Occupation Audio 28 8MB H_ Video 25 450MB H Storage And Recording storage Hard disk network backup Backup mode Network USB flash USB movable HDD USB DVD RW Video input 4 BNC 8 BNC 16 BNC Port Video Video output 1 BNC 1 VGA Working temperature she 10 90 61
23. eptable as separation points within the string Legal characters include letters numbers underlining dash and periods 2 There is no limit with the user and user groups You can add or delete the user groups according to user requirements The factory setup includes user admin You can set the groups as you wish The user can appoint the administrator in the group 3 The user responsibilities include group user The group and user names cannot be the same Each user can only belong to one group 3 User Name Groug Status Modify User admin GUI user Normal 3 default user Default User Modify Pwd Modify Group Add User Add Group Delete User Delete Group Cancel Picture 4 9 Account Modify User Modify the existing user attributes Modify Group Modify the existing team attributes Modify PWD Modify the user password You can set 1 6 bit passwords Blanks cannot be used at the beginning or end of the character string but is acceptable as separation points within the string Note The user who possesses the administrator user control can modify his her own or other user s passwords 31 EVOLVE Detective User Name Old New conim C Picture 4 10 Modify Password Add user Add a user in the team and set the user s accountability Enter the menu interface and input the user name and password Choose the team and choose the area of accountability area that can be used by multiple users a
24. ere is something wrong with the PTZ 2 The settings connection or the installation of the PTZ decoder is incorrect 3 The connections are not correct 4 The DVR PTZ settings are incorrect 5 The protocols of the PTZ decoder and the DVR are not matched 6 The address of the PTZ decoder and the DVR are not matched 7 When multiple decoders are connected the far port of the PTZ decoder line A B must connect to a 120 Q resistance to reduce the reflection otherwise the PTZ control is not stable 8 The distance is too far The motion detect function is not working Possible reasons 1 The time range setting is incorrect 2 The motion detect area setting is incorrect 3 The sensitivity is too low 4 Limited by some hardware version I cannot login via web or CMS Possible reasons are as followed 53 EVOLVE Detective 1 The systems are Windows 98 or ME Update to Windows 2000 SP4 or higher version ActiveX is disabled N 3 The driver version must be higher than dx8 1 Update the display card driver 4 Network connection failure 5 Network setting issues 6 Invalid password or user name 7 The CMS does not match the DVR program version 14 The image is not clear or there is no image in network preview state or video file playback state Possible reasons 1 Network is not stable 2 The user machine resources are limited 3 Choose the play in team mode in the network setup of DVR
25. essive brightness or reaching the set sensitive parameters the camera mask function is turned on and the linked function Such as send email show message or buzzer is turned on Channel Status CH1 CH2 CH3 CH4 O a O 7 iii a mmm Ta mm EIEI ENE iii a m7 a m m Jl O TI TI EI O O T Sensitivity Send Email Show Message Picture 4 20 Video Blind 38 EVOLVE Detective 4 6 1 3 Alarm Management Buzzer OFF Picture 4 21 Alarm Management Delay Set the record time When an event HDD Loss Disk No Space Video Loss and Video Blind occurs Buzzer You can set the Buzzer status as ON or OFF 4 6 2 Version Displays basic information regarding the system such as hardware information software edition and issue data ETC 39 EVOLVE Detective Record Channel 4 Extra Channel 0 Alarm In Alarm Output O System V 2 62 RO7 Build Date 2011 07 29 14 44 30 SerialNo 000102030408 otatus 963 Picture 4 19 Version 4 6 3 Motion Detect When the system detects a motion signal that reaches the set sensitivity point the motion detect alarm activates and the linked function such as Send email show message or buzzer is turned on Channel otatus Sensitivity Region Delay Show Message OFF send Email OFF Buzzer OFF Picture 4 20 Motion Detect 40 EVOLVE Detective Channel Choose the set motion detect channel Status Ind
26. fy power switch is ON 3 Power supply may be damaged 4 The program update is incorrect 5 The hard disk is damaged or the hard disk cables are broken or not connected 6 The front panel array is damaged 7 The main board of the DVR is damaged 2 The DVR reboots automatically or stops working after a few minutes Possible reasons 1 The input voltage is not stable or too low 2 The hard disk is damaged or the hard disk cables are broken or not connected 3 Video signal is not stable 4 Too much dust or poor environment conditions 5 The DVR hardware is damaged 3 System cannot detect hard disk Possible reasons 1 The hard disk power supply line is not connected 2 The cables of the hard disk are damaged or not connected properly 3 The hard disk is damaged 4 The SATA port of main board is damaged 4 There are no video outputs in single channel multiple channels or all channels Possible reasons 1 The software program and drivers may need to be updated 2 The image brightness is set to 0 Please restore the default settings 51 EVOLVE Detective 3 There is no video input signal or the signal is too weak 4 The channel protection or the screen protection is set 5 The DVR hardware is damaged 5 Real time image problems such as the image color or the brightness distortion Possible reasons 1 When using the BNC output the option between the N mode or PAL mode is incorrect and the image becomes black and whi
27. icates if the motion detect function is on or off Sensitivity Choose six sensitivity options Region Click setup and enter the setup area The area is divided into an 8x8 grid Green block is the current cursor area yellow blocks are the dynamic detect defensive area and black blocks are the unfenced areas You can set the area by dragging the mouse to draw the area Picture 4 21 Region Delay Delay a few moments and stop when the alarm state is turned off The range is 10 300 seconds Delay When alarm is over recording will last 10 300sec and then stop Show message The alarm information dialog box will open in the local host computer screen Send EMAIL Means sending an email to user when the motion detect alarm is activated Note Set in the Net Service to send email Buzzer Buzzer alarm will sound twice when the motion detect alarm is activated 4 6 4 Mobile Monitor To monitor the system by mobile device please make a router mapping of this port and use CMS to monitor and operate it by protocol 41 EVOLVE Detective Enable M4 Port 34599 Picture 4 22 Mobile Monitor Enable Select it to activate function Port The port used for mobile monitoring which you need to make a router mapping of if want to monitor by mobile device 4 6 5 Auto Maintain The user can set parameters to include Auto reboots time System Upgrade Default Settings Log Log out Shut down reboot ETC 42
28. k the Set button Step2 Click Pattern button as shown in Picture 3 14 input the scanning values in the Pattern value blanks Step3 Click Begin button and you can set the following items Zoom Focus Aperture Direction and so on refer to Picture 3 10 Click Set button and you will be returned to the PZT configure window refer to Picture 3 14 Step4 Click End button to complete setup and then click the right mouse button to exit 17 EVOLVE Detective Scan value blank Function Pattern 1 Scan Button P res el gt Tour Interval Patrol No Pattern Border End Picture 3 14 Pattern Setup 2 Pattern Calls Referring to Picture 3 10 click Page Shift button then enter PTZ control menu as shown in Picture 3 12 Input the pattern number of the scan into the value blank then click the Auto Scan button the PTZ will begin working using the Pattern lines Click the Stop button to stop 4 Boundary Scan 1 Boundary Pattern setup Step1 Click the left Directional button to turn the PTZ to set a direction refer to Picture 3 10 and click the Set button then select the Left Boundary button refer to Picture 3 15 Step2 Click the right Directional button to turn PTZ to set an opposite direction refer to Picture 3 10 and click the Set button then select the right boundary button refer to Picture 3 15 Step3 The left and right boundary setup is completed 18 EVOLVE Detective Function Pattern
29. onf Channel ES REC Mode Schedule O Manual O Stop Week Thu r Regular Detect Alarm Period 1 00 00 24 00 Period 2 00 00 24 00 0 Period 3 0 00 24 00 Period 4 00 00 24 00 Picture 4 2 Record Conf Channel Choose the corresponding channel number to set the channel Choose the all option to set the entire channels REC Mode Set video state Schedule Manual and Stop Schedule Record according to the set video type common detection or alarm and time section 25 EVOLVE Detective Manual Click the manual button and the corresponding channel will begin recording regardless of its setting Stop Click the stop button and the corresponding channel stops recording regardless of its setting Period Set the time for normal recording recording will start only within the set range Record type Set the recording type Regular detection or alarm Regular Performs regular recording in the set time section The video file type is R Detect Activates the motion detect camera mask or video loss signal When this alarm is set as the initial recording method the detection recording state is on The video file type is M Alarm When alarm is set as the initial recording method the detection recording state is on Note Refer to chapter4 6 3 to set corresponding motion detect function 4 3 3 Region Cover When the video image is affected by low light level or h
30. over restores HDD to default status 97 EVOLVE Detective 4 5 System setup Set the system parameters such as Language Date Time Account GUI Display Video and Exit 4 5 1 Language Language ENGLISH Picture4 5 System Language Language You can select the language you want to use 28 EVOLVE Detective 4 5 2 Date Time System Time 2011 08 11 16 32 43 Date Format YYYY MM O Date Separator Time Format 24 HOUR r DST Picture4 6 Date Time System time Set the system data and time Date format Choose the data format YMD MDY DMY Date Separator Choose list separator of the data format Time Format Choose time format 24 hour and 12 hour format DST Choose Daylight Savings Time option 29 EVOLVE Detective System Time 2011 08 11 16 33 07 Date Format YYYY MM Cl Date Separator 7 Time Format 24 HOUR DST O Day of Week Date Start End Picture 4 7 DST week System Time 2011 08 11 16 33 29 Date Format YYYY MM 7 Date Separator 7 Time Format 24 HOUR v DST Day of Week Date Start is 01 01 01 01 End s 01 01 01 Picture 4 8 DST date 4 5 3 Account Manage the user account Note 1 The character length is 8 bytes at most for the user and user group names Blanks cannot be 30 EVOLVE Detective used at the beginning or end of the character string but is acc
31. ower Switch 8 RS485 9 Power supply 10 VGA output NOTE if the rear USB mouse port is used then the front USB port becomes non functional 2 5 Port Connection Overview 2500 BB Cameras Audio Output Mouse 7 VIDEO y y VIDEO QU AE 5 VGA peal e AQ E E sW N Lod CINE TE i USB Port OWS Audio Input her s VGA Monitor TV Monitor PTZ Camera outer 7 fit ju Ja Ja ju E Network User Network User Network User Network User Network User Picture 2 1 Connection Diagram EVOLVE Detective 2 6 Audio and video input and output connections 2 6 1 Video input connections The video input ports utilize a BNC connector plug with an input signal of NTSC BNC 1 0Vp p 750 The video lines should be firmly connected to avoid signal interference and possible oxidation at the connection 2 6 2 Video output connections and options The video output is divided into NTSC BNC 1 0Vp p 750 and VGA selective configuration Please note the following regarding the display used for monitoring 1 Do not leave the display on for long periods of time 2 Stay away from any electromagnetic interference 2 6 3 Audio signal input Audio port is a BNC connector The audio signal line should be firmly connected to avoid signal interference and possible oxidation at the connection 2 6 4 Audio signal output Normally the output parameter of DVR audio signal is greater than 200mv 1KQ BNC which can be
32. r the password again For your system security please modify your password after first login 3 3 Desktop shortcut menu In preview mode you can right click your mouse to get a desktop shortcut menu The menu includes main menu record mode Search PTZ control Start Tour Volume regulate Logout view is for 1 4 8 9 16 channel screens EVOLVE Detective Main Menu Record Mode search PT Control start Tour Yolume regulate Logout View 1 View 4 A DE at om S 3 A qa Picture 3 3 Shortcut Menu 3 3 1 Main menu When you login the system main menu is shown as below Advanced Picture3 4 Main Menu HDD Man age EVOLVE Detective 3 3 2 Record Mode 113 3 iT 7 Please check current channel status o means it is not in recording status e means it is in recording status You can use the desktop shortcut menu or click main menu gt recording function gt recording set to enter the recording control interface REC Mode All 1 schedule Manual Stop Picture 3 5 Record Mode Schedule Record according to the configuration Manual Click the All button and all channels will record no matter which state the individual channel is set to Clicking the individual channels will allow only those particular channels to record Stop Click the Stop button and all channels will stop recording no matter which state the individual channels are
33. se this IP address to visit the DVR through user port DDNS Is the abbreviation of Dynamic Domain Name Server Local domain name Provide the domain name registered by DDNS User name Provide the account name registered by DDNS Password Provide the password registered by DDNS When the DDNS is successfully configured and started you can connect by entering the domain name in the IE address column to monitor Note The DNS setup must be configured correctly in the network setup 48 EVOLVE Detective DDNS Type CN99 7 Enable C Picture 4 31 DDNS setup UPNP JUPNP protocol can auto port forwarding on router make sure UPNP is running on router before using it Enable Make sure UPNP is running on router before usinq this Picture 4 32 Enable Choose Enable to make sure all UPNP settings are available HTTP Router will automatically distribute HTTP port for the device when IE viewing it will require this port setting e g 60 12 9 26 66 49 EVOLVE Detective TCP Router will automatically distribute TCP port for the device when monitoring via CMS it will require this port setting Mobile Port Router will automatically distribute Mobile Port for the device when mobile monitor it will require this port setting 50 EVOLVE Detective 5 FAQ and maintenance 5 1 FAQ 1 The DVR cannot boot up normally Possible reasons 1 The power supply is not correct 2 Veri
34. set Clicking the individual channels will stop the recording of that particular channel 3 3 3 Search Playback There are two methods for you to play the video files on the hard drive s 1 In the desktop shortcut menu Main menu gt Search Note The hard drive that saves the video files must be set as read write or read only state 3 5 1 10 EVOLVE Detective otartTime Type MN 17 48 51 O 17 49 22 i 17 50 25 17 51 28 LJ 17 51 59 VDDD DADAVAAAA O 17 58 09 Start Time End Time Size KB ALA Bonares ao Playback Picture 3 6 video playback 1 Listed files 2 File information 3 File searching 4 File backup 5 Operation hint 6 Playback control Listed files Look up the listed files that are contained within that search criteria File information Look up the found file information File searching Search the file according to the searching parameter File Type Channel Start Time 2011 08 171 00 00 00 End Time 2032 01 0100 00 00 Picture 3 7 file searching 11 EVOLVE Detective File type Set the searching file type HDD type Set the searching HDD type Channel Set the searching channel Start Time Set the searching start time scan End Time Set the searching end time scan File backup Backup the chosen file Click the button and operate as directed Note The storage drive must be installed before the file can be backed up If the backup is terminated
35. t the same time Once the team is chosen the user oversees the subclass of the team The common user s accountability should be set lower than the advanced user User Name Po Reuseable U password 7 contra Memo GROUP Shutdown the device Channel Title Schedule Picture 4 11 add user 32 EVOLVE Detective Add Group Add auser team and set their range of accountability There are 36 different possible areas shut down the device real time surveillance playback recording setup video file backup ETC Channel Title Schedule Backup HDD Management PTZ Control Account Query System Info Picture 4 12 Add Group Delete User Delete the current user Choose the user and click Delete User button Delete Group Delete the current group Choose the group and click Delete Group button o GROUP Name Memo administrator group Picture 4 13 Delete Group 33 EVOLVE Detective 4 5 4 GUI Display Configure the video output parameters including the front output mode Front output The local preview mode includes channel title time display channel title record status and alarm status Channel Title Video CH Video Time Color Setting CH1 AMO CH2 AMO2 CH3 AMO3 BOTTOML CH4 AM04 BOTTOML TOPRIGH Preview Time ON r Preview CH ON 7 Record Status ON 7 Alarm Status ON nn Ba Picture 4 14 GUI Display Channel Title Click the channel name modify but
36. te 2 The DVR is not matched the monitor impedance 3 The video transmission distance is too far or the loss of the video transmission line is too large 4 The color and brightness setting of the DVR is incorrect 6 cannot find the video files in local playback mode Possible reasons 1 The data line of the hard disk is damaged 2 The hard disk is damaged 3 Update the program with the original program files 4 The video files to look up are hidden or within another file 5 The recording function is not set to ON 7 The local video is not clear Possible reasons 1 The image quality is bad 2 The reading program is incorrect reboot the DVR 3 The data line of the hard disk is damaged 4 The hard disk is damaged 5 The DVR hardware is damaged 8 There is no audio signal in the surveillance window Possible reasons 1 Itis not an active audio channel 2 The audio files are damaged 3 The audio lines are damaged 52 EVOLVE Detective 10 11 12 13 4 The DVR hardware is damaged There is audio signal in the surveillance window but no audio signal during playback Possible reasons 1 The audio option is not chosen in the settings 2 The allocated channel is not connected with the video The time is wrong Possible reasons 1 Incorrect settings 2 The battery is bad or the voltage is too low 3 The DVR hardware is damaged The DVR cannot control the PTZ Possible reasons 1 Th
37. ton and enter the channel name menu Modify the channel name The 16 Chinese characters and 25 letters are supportive Preview Timel Displays the system data and time in the surveillance window preview Channel Displays the system channel number in the surveillance window Record Status Displays the system recording status in the surveillance window Alarm Status Displays the system alarm status in the surveillance window Color Setting Sets the selective image parameters current channel for single window display and cursor place for multi window display You can press the Set button to enter the interface and set the different parameters the image parameters include tonality brightness contrast saturation 34 EVOLVE Detective Brightness Contrast saturation Hue Default Color Picture 4 15 Color Setting Note Clicking the Default button will return all configured settings to default settings 4 5 5 Video Configure video parameters in the local preview mode include Resolution Video Standard Tour Time and Output Adjust Resolution 1360 768 Video Standard PAL Tour Time 5 E EVOLVE Detective Picture 4 16 Video Resolution Set display resolution Video Standard Set the video standard as PAL or NTSC Tour Time Set the patrol switch interval The set range is 5 120 seconds Output Adjust Adjust TV output area parameters Top Deflate i Bottom Deflate
38. u can control the PTZ rotate orientation Left click your mouse and then rotate the mouse to adjust the multiple zoom options of your camera Set Enter the function operation menu Page switch Switch between different pages Special functions 1 Preset Set a location for the preset call the preset point and the PTZ will turn to the preset position 1 To set the Preset option Step1 As shown in Picture 3 10 click any of the Direction buttons and the PTZ will turn to that position click the Set button to enter that position as shown in Picture 3 11 Step 2 click the Preset button and then enter the preset points in the input blanks Step 3 click the Set button and the PTZ Control window will open shown in Picture 3 10 and this completes the setup of preset points and preset positions To clear Preset Input preset points click Remove button to remove the preset int input blank Preset button Function Preset Interval Tour Border Set Del Preset Picture 3 11 Preset Settings 15 EVOLVE Detective 2 Preset Point Calls Click the Page Switch button to enter the PTZ control interface as shown in Picture 3 12 In the input blank enter the preset points and then click the Preset button and the PTZ will turn to the corresponding preset point Value input blank O 0 Pattern AutoScan Page Switc Picture 3 12 PTZ Control 2 Touring between Points 1 Touring between
39. ut 3 Power on the speed dome EVOLVE Detective 3 Basic operation Note Any buttons that are displayed in gray indicates it is not Supported 3 1 Preview 2011 08 19 18 07 41 Fri CAMO amp Picture3 1 16 Channel Preview You can right click your mouse to switch between the windows The system date time channel name surveillance video and the alarm status are shown in each Recording status 1 3 Audio window Motion detect DEN Video loss Table 3 1 Preview icon e EVOLVE Detective 3 2 System Login When the DVR boots up the user must login and then the system will provide the corresponding functions with that particular user s authority level There are three user settings admin guest and default and these settings initially have no password assigned Admin is the administrator level while guest and default s permissions are preview and video playback only User admin and guest s password can be revised while their permissions cannot be revised user default is the default login user whose permission can be revised but not its password User Name ladmin Password Please Login Picture 3 2 System Login Password protection If the password is entered incorrectly three times the alarm will start If the password is entered incorrectly five times the account will be locked After 30 minutes or if the unit is rebooted the account will be unlocked and you can try to ente
40. y placing the cursor on that area Special functions Accurate playback Input time h m s in the time column and then click the play gt button The system will perform an accurate playback according to the search time entered Local zoom When the system is in a single window full screen playback mode you can drag your mouse onto the screen to select a section and then left click the mouse to activate the local zoom You can right click the mouse to exit 3 3 4 PTZ control Operation functions include PTZ direction control step zoom focus iris and setup operation patrol between spots trail patrol boundary scan assistant switch light switch level rotation and so on Note1 Decoder A B line connects with DVR A B line 2 Click main menu gt System configuration gt PTZ setup to set the PTZ parameters 3 The PTZ functions are decided by the PTZ protocols oom Focus Iris Eb Set Cancel Picture 3 10 PTZ setup Speed Set the PTZ rotation range Default range 1 gt 8 Zoom Click button to adjust the zoom multiple of the camera Focus Click button to adjust the focus of the camera 14 EVOLVE Detective Uris Click button to adjust the iris of the camera Direction control Control the PTZ rotation 8 direction controls are supported 4 directions in Front panel are supported High speed PTZ Full screen show channel image Left click your mouse and yo
Download Pdf Manuals
Related Search