Home
User Manual „Keramikofen 1500“ Keramikofen 1500“ Keramikofen
Contents
1. in contact with the material to be burnt neither should they be touched directly Given that this furnace is a high temperature kiln with a very compact assembly even the external walls will heat uo Cheat radiates especially to the top Consequently there is a risk of burning H Bestelloblock Geborauchsanweisung Brosch ren Plakate Instruktionen Bedienungsanleitungen Bedienungsanleitung Sinterofen MG_ DKA50001_00 Ofenoedienuns enslisch doc Seite 2 von 2 Dokumenten Nr MG _DKA50001 Anderungsindex 00 Freigabedatum 07 04 2005 Fa Zirkonbelia User Manual Keramikofen 1500 6 Error messages Solutions High Temperature Connecting plug between thermo element Reconnect the plug and delete OFF and controller has been removed during error message press the two operation left buttons on the controller simultaniously Sintertime too long Wires on the thermo element are broken Change thermo element Error message 5 0s check by carefully pulling Contacts on the square ceramic clamp Tighten contacts carefully with next to the thermo element are loose a screw driver Contacts inside of the thermo element s Open cover of the plug and plug are loose grey plug with two tigten contact with a Copper pins screwdriver The plug of the thermo element has been Move plug into right position pushed by force into the wrong position Defective display Change display H Bestelloblock Geborauchsanweisung Brosch ren Plaka
2. Dokumenten Nr MG DKA50001 Anderungsindex 00 Freigabedatum 07 04 2005 Zirkon ala User Manual Keramikofen 1500 1 Activate the furnace Turn the main switch from O OFF to 1 ON ee TIS S tg tte tee 4 5 8 S ARG Sie 4 Sa ee ett tI EA ES Then select the requested program program 1 is pre selected To continue with the previously used program skip this step To select a program use the pushbutton U to access the program selection Press the button several times until the display resembles the picture below picture on the left shows that program 1 has been selected Now use the uo A and down VW buttons to select the requested program Use the pushbutton O to go back to the initial level EUROTHERM EUROTHERM EUROTHERM _ emma E a emmm e M M oe To start the furnace with the selected program press the green switch If the furnace is working the green button is illuminated and the display shows the message ZIRKONZAHN Programm 1 running e g if program 1 has been selected Furthermore on the bottom of the display an orange RUN message is illuminated indicating that the program is running 9 Notes controller H Bestelloblock Geborauchsanweisung Brosch ren Plakate Instruktionen Bedienungsanleitungen Bedienungsanleitung Sinterofen MG_ DKA50001_00 Ofenoedienuns enslisch doc Seite 1 von 1 Dokumenten Nr MG DKA50001 Anderungsindex 00 Freigabed
3. atum 07 04 2005 raiZirkoneellal User Manual Keramikofen 1500 To pause the program press both arrow keys simultaneously The orange RUN message starts blinking the temperature inside the furnace remains at the value indicated To restart the program simply press again both arrow keys simultaneously To stop the programme press both arrow keys simultaneously for more than 1 sec The orange RUN message disappears 3 Deactivate the furnace Switch off the furnace in reverse order to the starting method 4 Programme The controller has been coded to reflect the following programs ihe ne 1500 1500 1500 1500 Heating Period h 3h 9h 1 8h 3h von RT 8 C min 12 C min 14 C min 8 C min Dwell Time 9 00 00 9 00 00 1 00 00 9 00 00 4 C min down to Cool down Time not defined not defined not defined 800 C NOL defined below this value 5 Advice when using the furnace Lock the furnace door always by using the bolting device Never open the furnace door during operation Danger of burning heating rods can be damaged Do not open the furnace door prior to complete cooling down wait for message Timer End in the display Always close the furnace door with caution When removing a shelf always use the substitution stopper delivered with the unit Heating rods and temperature sensors are very sensitive items and consequently have to be handled with care l e they should never come
4. te Instruktionen Bedienungsanleitungen Bedienungsanleitung Sinterofen MG_ DKA50001_00 Ofenbedienung englisch doc Seite 3 von 3
Download Pdf Manuals
Related Search
Related Contents
OPERATING and MAINTENANCE MANUAL BETRIEBSANLEITUNG Tektronix Thermometer 070-9472-02 User's Manual Network Camera Camera Management Tool User Manual - AV-iQ Copyright © All rights reserved.
Failed to retrieve file