user manual A5-allo2.cdr
Contents
1. Adobe Soundbooth on adobe com Sony Sound Forge on sonycreativesoftware com Mefmedia Music Editor Free on music editor net i Any kind of software you use don t forget to export the edited file Into mp3 format WWW GARDEMATIC COM 26 GARDEMATIC Important safety information WARNING Failure to follow these safety instructions could result in fire electric shock or other injuries or damage to NanoMagic or other property Read all the safety information below before using NanoMagic Handling Handle NanoMaic with care It is made of metal glass and plastic and has sensitive electronic components inside NanoMagic can be damaged if dropped burned punctured or crushed or if it comes in contact with liquid Repairing Don t open NanoMagic and don t attempt to repair NanoMagic by yourself Disassembling NanoMagic may damage it or may cause Injury to you If NanoMagic is damaged malfunctions or comes in contact with liquid contact GardeMatic or an GardeMatic Authorized Service Provider You can find more information about getting service at www gardematic com Battery Don t attempt to replace the NanoMagic battery yourself you may damage the battery which could cause overheating and injury The lithium ion battery in NanoMagic should be replaced only by GardeMatic or an GardeMatic Authorized Service Provider You can find more information about getting service at www gardematic com WWW GARDEMAT2. 31 GARDEMATIC Warranty NanoMagic Warranty GareMatic Ltd undertakes 3 year guarantee for the NanoMagic controller so for the Master as for the Slave units from the date of the invoice In case of any malfunction please contact GardeMatic s Customer service by e mail fo sales gardematic com Please provide the most detailed description of the fault In case the problem can t be fixed by consultation the device must be returned to Gardematic at the buyer s expense GardeMatic will investigate the reason of the problem It will be up to GardeMatic s sole decision if the device will be repaired or exchanged This guarantee will not apply in case of problems due to improper use failiure of the transformer due to excess voltage from the outer network or a defect due to a shortcut outside the devices In case of the change of the device the guarantee period will not be extended the original guarantee period will apply WWW GARDEMATIC COM 32 GARDEMATIC Disposal and recycling information NanoMagic disposal and recycling You must dispose of NanoMagic properly according to local laws and regulations Because NanoMagic contains electronic components and a battery NanoMagic must be disposed of separately from household waste When NanoMagic reaches its end of life contact local authorities to learn about disposal and recycling options The battery will be removed and recycled in an environmentally friendly man
3. seconds Formatting this volume will erase all data on it Back up any data you want to keep before formatting Do you want to continue Az SD card formatting Matintosh OSX 1 Insert the SD card Use NanoMagic USB card reader The SD card will mount automatically onto your desktop when inserted 2 Open the Disk Utility You can find the Disk Utility program in the Utilities folder in your Applications Select the SD card from the list of drives in the left frame 3 Erase the SD card data Select the Erase tab in the main window after selecting your SD card Select FAT32 from the Volume Format dropdown menu and enter a name for the SD card in the Name field Click Erase when you are ready to format Disk Utility will ask you to confirm Formatting the SD card will erase all of the data stored on it Be sure that you have made backups of any important files before formatting WWW GARDEMATIC COM 14 GARDEMATIC SD card file operations Copy file Microsoft Windows 1 Click on the Start button and then Computer 2 Locate the Micro SD card USB drive and double click to open the contents of the drive 3 Continue to navigate down through whatever drives and folders are necessary until you find the file you want to copy 4 Highlight the file you want to copy by clicking on it once Do not open the file 5 Choose Organize and then Copy from the menu at the top of the folder s window A copy
4. GARDEMATIC COM 20 GARDEMATIC Manual mode Manual mode is the service function of NanoMagic The device will start all the programmable outputs in this position To swith to Play mode you have to switch the 3 way swich connected to NanoMagic into Manual position The following two screens may appear here When we turn the switch to Manual position the device will countdown from 5 seconds When this time is over it changes to the next screen and the outputs start TO work NanoMagic may show different error messages in Manual mode You can find the description for these on the pages Error messages WWW GARDEMATIC COM 21 GARDEMATIC Error messages NanoMadgic assists the maintenance and operational tasks with several useful error message windows Hanoblas ic Error Low Water O card error Mem geep p re I Aet paate gt Low water the water level has dropped below the ERR sensor The system could not refill the fountain pool Check refill or check if there is a leackage or if the nozzles spray out of the pool As soon as the water level reaches the MIN sensor the show goes on again High wind the wind sensor input gets wind signal The show will pause untill the wind will cease NanoMagic observes the input and in case there is no wind signal for 5 minutes the show will start In case there is no wind still the device shows this error c
5. Having made the connections NanoMagic can be connected to the mains network by a transformer At the start the unit will read the content of the SD card This can take a few minutes depending on the size of the content We must wait for the screen below standby After the appearence of the main screen NanoMagic is ready for work The SD card can be removed from the SD card slot on the left side of the unit and the program can be modified according to the user s desire For the removal of the SD card push the SD card slightly then let the card loose The card will spring farther out e E ES e A SD card in SD card out WWW GARDEMATIC COM 10 GARDEMATIC Mounting Mounting of NanoMagic The unit can be fastened on a regular DIN rail The box must be susoended on the upper face of the DIN rail To fasten it pull out the small handle on the lower side and push the box on the rail 00000000000000000000000000 WWW GARDEMATIC COM 11 GARDEMATIC Online programming tool There is an online programming tool to create the show nanomagic gardematic com To log in you will need the serial number of your Nanomagic Master unit and the password by e mail Hot ivated AGAR Seriaj RSG SE Pict Paste Pray 10 27 9 Snape 1 30 30 Fitter 6 00 Fi mete 20 2100 mon gt m m COTO Ezera 7 poen RRR Yn RRR E A bb eo m a RE ei i sete ti ig i i i nn BB Hn ER HR HH H
6. during the show The music file is stored on the SD card in something mp3 format Any name for the file will do though use the English alphabet Due to the size of the screen the device will cut the names exceeding 8 characters It is suggested not to use longer ones The mp3 file must be copied to the SD card The procedure of the copying is contained in the SD card file operations page y Playing music may involve royalty payment obligation Please Check the local regulations NanoMagic can control 1 program and 1 mp3 music file Do not copy more files on the SD card because it can cause errors WWW GARDEMATIC COM 24 GARDEMATIC Set music Music should always be in synchron with the show lf needed ask for assistance from the GardeMatic customer service There are cases when music begins sooner or later than the show NanoMagic is able to start the music sooner or delay the music compared to the start of the show The START STOP and OFFSET time of the music can be defined on the NanoMagic Online Programming Tool where the show is programmed WWW GARDEMATIC COM 25 GARDEMATIC Edit amp cut music Sometimes it takes a while until the music we use becomes dynamic Or may be we want to mix several different music one after the other in all these cases we have to edit music to get a perfect result There are different professional and free music editor softwares available for this purpose
7. to save Bl Press Select to edit the program stop Press Menu to move the cursor to the next value Press Select to adjust value Press Select to save Music start Press Select to edit the music start Liss LA Ld Colo Press Menu to move the cursor to the next value Press Select to adjust value Press Select fo save Lance Prosram Stor Ber Me R eal ee Press Select to edit the music stop Press Menu to move the cursor to the next value Press Select to adjust value Press Select to save WWW GARDEMATIC COM 17 GARDEMATIC Menu tree 2 standby mode Music orfzet Press Select to edit the music offset IM Ll Lut Colo Press Menu to move the cursor to the next value Press Select to adjust value Press Select fo save Cancel dE goa Press Select to edit the program sleep Press Menu to move the cursor to the next value Press Select to adjust value Press Select fo save rie rie pG Press Select to edit the filter start Press Menu to move the cursor to the next value Press Select to adjust value Press Select fo save Filter Stoet Press Select to edit the filter stop Press Menu to move the cursor to the next value Press Select to adjust value Press Select to save Press Menu to next screen Demo slices left Press Menu to next screen or press Select to Hot uster activate Press Menu to move the cursor to the next value Press Select to value Press Sele
8. HH L AG p 0008008 00 U U HH ta E eee EE T Z A oF 2 Channel 12 IDEE A M Ta C 4 x 1 AL Tii L LL RRR RRR L E REE R RR H m mm m y A 1 a E A A HH H R R ERE Gi E B HE Hi R 2 ens R RR SS U U 0 0 HIH THR 19 A DD AA pB 08 80 00 08 H HU pn HT DDD H A 91 I DD DRK HR HD 00 A Hn ED HH Hn HI HTH Nt AUDA A o A o Y a A A lt A MM S ees a WWW GARDEMATIC COM 12 GARDEMATIC SD card formatting SD card formatting Microsoft Windows On the SD card you will find a demo program show1 nan This will enable you to test the function of the unit Formatting will erase all the data from the SD card Be sure that you have made backups of any important files before formatting You can use any microSD card but you must format the SD card before using it Steps of formatting 1 Insert the micro SD card into the Nanomagic USB card reader then connectitto the computer 2 Click the Start menu icon in the bottom left corner then click Computer 3 Right click on the SD card drive under the heading Computer ara Format Cut Copy Rename New Properties WWW GARDEMATIC COM 13 GARDEMATIC SD card formatting SD card formatting Microsoft Windows 4 Choose FAT32 File System in the pop up window and the quick format checkbox Click start 5 Click Ok in the pop up window and formatting will be ready in a few
9. IC COM 27 GARDEMATIC Important handling information Installation Installation of NanoMagic can be carried out by a skilled electrician If you are uncertain in any question ask for assistance from GardeMatic Ltd The unit must be placed in electric cabinet do not expose it to direct sunshine or high humidity Temperature Operating temperature NanoMagic is designed to work in ambient temperatures between 32 and 95 E 0 and 35 C and stored in temperatures between 4 and 113 E 20 and 45 C NanoMgaic can be damaged and battery life shortened if stored or operated outside of these temperature ranges Avoid exposing NanoMagic to dramatic changes in temperature or humidity WWW GARDEMATIC COM 28 GARDEMATIC Restart your NanoMagic NanoMagic does not have to be restarted In case if it is necessary 1 switch NanoMagic into standby mode 2 switch off the main switch of the electric cabinet 3 count till 10 4 switch the main switch on again 5 NanoMagic will restart At the start the unit will read the content of the SD card This can take a few minutes depending on the volume of the content Loading screen We must wait for the main screen standby After the appearence of the Standby screen Nanomagic is ready for work WWW GARDEMATIC COM 29 GARDEMATIC Upgrade your NanoMagic NanomMagic is continuously being developed and improved in its operation The devic
10. Over VALL LLL LLL LL L L L L L L N ONTROLLER SER MANUAL WWW GARDEMATIC COM GARDEMATIC Welcome Thank you for choosing Nanomagic controller We are convinced that this controller will answer your expectation and you will agree that NanoMadgic is a very flexible intelligent device offering perfect performance NanoMagic consists of 1 Master unit and can be expanded by further max 100 Slave units Outputs of the Master unit filter pump waterlevel sensor water refill valve valve motor programmable outputs Outputs of the Slave unit valve motor programmable outputs You can edit the show on the nanomagic gardematic com site When ready you can save it on a microSD card and can insert it into the Master unit This way you can play the show easily WWW GARDEMATIC COM 3 GARDEMATIC Contents Overview NanoMagic overview 5 Accessories 6 Buttons and connectors 7 Labels 8 Getting strated Setup NanoMagic 9 Mounting 11 Programming Online programming fool 12 SD card formatting 13 SD card file operations 15 Menu Standby mode 16 Menu tree in standby mode 17 Playmode 20 Manual mode 21 Error messages 22 Activation 23 Music Add music 24 Setmusic 25 Edit amp cut music 26 Safety handling 8 support Important safety information 27 Important handling information 28 Restart your NanoMagic 29 Upgrade you NanoMagic 30 Winterization 31 Warranty 32 Disposal and recyclin
11. ct to activate al AGO4EFSE Bit aye gt WWW GARDEMATIC COM 18 GARDEMATIC Menu tree 3 standby mode Press Menu to move the cursor to E DOLL the next value Press Select to MRT SZ adjust value Press Select to submit Your NanoMagic is Activated Press Select to back Invalid code contact ee id code GardeMatic Press Select to back Press Menu to next screen or press Select to serial RE Press Menu to move the cursor to the ames Bde ee next value Press Select to value Press Select to back Back Confis Chere When we modify the programmed times then HEE ist Lhansez the Config Changed window appears at the end Press Select to Apply Changes NanoMagic will restart now WWW GARDEMATIC COM 19 GARDEMATIC Play mode Play mode is the default function of the device It starts and stops the outputs according to the preadjusted program To swith to Play mode you have to switch the 3 way swich connected to NanoMagic into Auto position The following two screens may appear here When the actual time is just within the interwall between the start and the stop times the show starts immediately When the actual time is out of the start stop interwall the next start time will be displayed NanoMagic may show different error messages in Standby mode You can find the description for these on the pages Error messages WWW
12. e can be upgraded by the help of an SD card It is advised to buy a new SD card not to be forced to erase the one in the device and to copy it Current firmware E 1 rena Press Menu to Firmware screen ManoMasjo wi l a in standby mode Firmware frissit s download the zip file and unpack it having unpacked it you will find 1 fw bin file format the new SD card and copy the fw bin on it switch off the main switch exchange the SD card in NanoMagic and the new one switch back the main switch upgrading has started this may take a few minutes When the upgrading is complete you will see the following screen CON 0s 01 a WN 9 Insert the former SD card into NanoMagic where there is the file of the show and the devide will restart working The device will read the content of the SD card This can take a few minutes depending on the volume of the content Wait until the following screen appears Hanollasic 10 32 Stand Menu After the Standby screen has appeared NanoMadgic is upgraded and is ready for work WWW GARDEMATIC COM 30 GARDEMATIC Winterization Winterizing NanoMagic The control box must not be fully cut off the current On areas where the temperature drops below freezing point a heating bulb must be installed into the electric box This helps to avoid undesired humidity NanoMagic must be switched to Standby mode for winter period WWW GARDEMATIC COM
13. g information 33 WWW GARDEMATIC COM 4 86mm GARDEMATIC NanoMagic overview Modells MASTER 4 8 16 22 30 output output output output output you can simply update to Mp3 play free Mp3 play for music fountains on gardematic com SLAVE output Size and weight Height 86 mm 3 3858 inch Width 157mm 6 1811 inch Dept 59 mm 2 3228 inch Weight 290g 0 639 pounds 157mm 59mm c Ii E 00000000000000000000000000 00000000000000000000000000 WWW GARDEMATIC COM 5 GARDEMATIC Accessories Power supply Industrial power supply with adjusting screw In 100 240V AC O 50 60Hz Out 12V DC 1 24 You can use the master power supply for Slaves up to 8 pcs Over 8 Slaves you need a new power supply per 10 pcs Card reader J Micro SD to USB 2 0 card reader n a for the NanoMagic program upload MicroSD card Micro SD memory card You can use all memory card Screwdriver You will find a screwdriver in the b _ gt Cables p eel ell You will find cables for the power supply for the connection Use a local plug to connect the power supply into main network WWW GARDEMATIC COM 6 GARDEMATIC Buttons and connectors 1 microSD card slot 2 3 5 Jack music output 3 power supply 12V DC 4 programmable outputs 24V AC 5 dedicated inputs amp outputs 6 menu buttons 6060060004000 000000000000000009 S e WWW GARDEMATIC COM T GARDEMATIC Labels Main label bac
14. heck the reason causing a shortcut between WIND and W COM inputs nan Missing the show is stored in nan format file by the system In case of this message the SD card does not contain such file or it may be faulty or the SD card can t be read SD card error There is no SD card in the device or it is faulty Check it or exchange the card Try to format the card Demo expired NanoMagic has been delivered in DEMO mode and the demo period has expired You need a code to activate the device Contact your installer or distributor WWW GARDEMATIC COM 22 GARDEMATIC Activation Nanomagic will be delivered in DEMO mode as default DEMO mode means a time limit while the device will be functioning After the expiration the outputs will be blocked When the unit will be purchased GardeMatic will provide the activation code for the buyer and there will be no further time restriction How to activate In Standby mode press Menu to Demo screen Press Select to activate Press Menu to move the cursor to the next value Press Select to value Press Select to activate lali LUA Act wate gt Press Menu TO move the cursor to the next value Press Select to adjust value Press Select to submit Your NanoMagic is Activated Press Select to back Invalid code contact GardeMatic Press Select to back WWW GARDEMATIC COM 23 GARDEMATIC Add music NanoMagic is able to play music
15. k of the device 1 Modellname and powering data 2 Serial number for activation and other support LE mg MODEL NM02MA30 1881811118 ATAN II min SINASOABESE lt 2 _ MADE INEU A C d Music label on left side of device Mm Your device activated for music play Your device can not play music now but you can buy an Upgrade on gardematic com WWW GARDEMATIC COM 8 GARDEMATIC Set up NanoMagic First setting up and connecting NanoMagic NanoMagic can be set up only by a skilled electrician For the installation you will need the following tools 1 Screw driver 2 Electric cabinet with DIN rail with suitable high voltage protection by Fi relay Please check the local regulations 3 NanoMagic wiring manual 4 NanoMagic Master unit and the optional Slave unit s The unit has terminals on both sides only cables having MAX 2 5 mm Jferrule sleeve can be connected You will find the order and description of the cable connection step by step in the NanoMagic manual Do not connect or disconnect any cable to or from the terminal when it is under voltage The unit can be operated by the enclosed transformer The functioning of the unit can be tested in advance Though the sensor inputs and AUTO STANDBY MANUAL must be connected If not connected you will get an ERROR message WWW GARDEMATIC COM 9 GARDEMATIC Set up NanoMagic First setting up and connecting NanoMagic
16. ner Battery replacement The lithium ion battery in NanoMagic should be replaced only by GardeMatic or a GardeMatic Authorized Service Provider and must be recycled or disposed of separately from household waste X European Union Disposal Information The symbol above means that according to local laws and regulations your product and or its battery shall be disposed of separately from household waste When this product reaches its end of life take it to a collection point designated by local authorities The separate collection and recycling of your product and or its battery at the time of disposal will helo conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment WWW GARDEMATIC COM 33 NOTES WWW GARDEMATIC COM 34 NOTES WWW GARDEMATIC COM 35 GARDEMATIC WWW GARDEMATIC COM GardeMatic Ltd H 1163 Budapest Gordonka u 8 HUNGARY Phone 36 1 403 2634 E mail sales gardematic com TradeMark amp Copyright 2013 GardeMatic Ltd All rights reserved
17. of the file is now stored in your computer s memory 6 Navigate to the location where you want to copy the file to Once you ve found the folder click on it once to highlight it 7 Choose Organize and then Paste from the folder window s menu Rename file Microsoft Windows 1 Right click on the file and select Rename 2 Now you can edit the file name when you finished press Enter WWW GARDEMATIC COM 15 GARDEMATIC Standby mode Standby mode is the interactive function of the device This position enables you to adjust or modify time and other values in the Menu To enter Standby mode you have to adjust the 3 way switch connected to NanoMagic into Standby position You will see the main screen to appear Use the Menu and the Select buttons on the front panel of NanoMagic for the navigation in the menu 00666664066666666666669399995 600600000000000000000000009009 NanoMagic may show different error messages in Standby mode You can find the description for these in the chapter Error messages WWW GARDEMATIC COM 16 GARDEMATIC Menu tree standby mode Press the Menu button to the next screen Press Select to edit the time Press Menu to move the cursor to the next value Press Select to adjust value Press Select to save rrosram starts Press Select to edit the program start Press Menu to move the cursor to the next value Press Select to adjust value Press Select
Download Pdf Manuals
Related Search