Software User Guide
Contents
1. Button Use the button to lighten the contrast of the image a Contrast Button Use the button to darken the contrast of the image am Color Channel Adjust Use the individual color channel and buttons to adjust the individual color channels of the image D Note Color Channel Adjustment is not available when the image has been converted from color to grayscale a Yellow Color Channel Use the yellow color channel and buttons to adjust the yellow color channel only mw Yellow Button Use the button to decrease the amount of yellow in the image mw Yellow Button Use the button to increase the amount of yellow in the image a Magenta Color Channel Use the magenta color channel and buttons to adjust the magenta color channel only E Magenta Button Use the button to decrease the amount of magenta in the image mw Magenta Button Use the button to increase the amount of magenta in the image a Cyan Color Channel Use the cyan color channel and buttons to adjust the cyan color channel only E Cyan Button Use the button to decrease the amount of cyan in the image mw Cyan Button Use the button to increase the amount of cyan in the image a Brightness Color Channel Use the density color channel and buttons to adjust the brightness of the image Brightness performs similar to what a black colo2. 2 Note gt The eft list box contains the information selected for the back print The right list box contains the different information options you can add The Sample field will show you how the backprint will look The total string length will show you how many characters are in the line Up to 39 characters can be used 16 Film Scanner Tab User Guide Film Scanner Tab The Film Scanner tab in the Admin Interface includes these sections w Default Settings turn the scratch removal option on off and adjust the Nudge settings wm Base for Scans choose a base for scans smaller bigger than 8x10 the higher the number the better image quality am Options shows the different film position buttons and other options available for the film scanner w Color Step Settings adjust the step settings these are configured at the factory for optimal performance Figure 34 Film Scanner Tab Order Catcher Tab The Order Catcher tab in the Admin Interface includes these sections em Print Mode for Order from Order Catcher set the print mode for orders from the order catcher a Print automatically print is started automatically a Print by pre judge print print is on hold to start print use PUP mode em Order Catcher Registration shows the names in use for order catchers used in the system 1 You can add remove order catchers from the Available and In Use columns by using the arrow buttons ae e Figure 35 Add Remove Fil
3. 2 The ScanStation Admin Interface OVOTVIOW 65 4 0 ot 5 Ge os Gace 4a oe eee E oe oe a EO os oe eee Bee ee eee en ee Gewese se 9 GMI COOMONS 2 ce eres oe oe oo ee oe oe eR SOOO FEES O05 OSE 1 OES OE SSO GOR OE SHEE eee es eae es ees 9 Dy Stent INIGEMANON 4344405600 55666556545 a aea Gebhereed ease hiweehdeee bs oe sds SEERA 10 UEC 05 a Se ene a ee gee EA ae ee ee ee ee ee ee ee ee ee 10 PoWVICOMMICHE SCUINGS 622 66 o60c5c os cece nurses ates een e aeeee eee a E Oeee ete ri ate eeeteeteeeen 11 gf ee N ee Se ee ee er ee 11 ScanStation Admin Interface 4 256 6 2 cena hoa ek eee es seen ees sees ewe seee wee eee ene eae en 11 S EA I E E E N E E E eae 6a E E E E eee een ee we ne 12 ee T o E E E E E E E EE E eee peewee nae E E E or E EE E eee I2 Dae Seu eene e Eaa a a eae a a a a 12 WEE a n na E E E E EEE E E EE Ga PEE EEE E E eee 13 PMT ICOM 4 4 nec eaten a eee rE AA a a oo BE ee ak ee oe E 13 DVIS poe eee ee a ha ee pe a ee ee ee oe ee ee ee ee ee ee ee 13 cu eea ee eee ee ee EEA AEG ee AE N ee 14 COOL SCP ScHINGS eae tinued ey eon eee ee eee oe eee see tour euwew wee eee E E EE ese cee ss 14 Hardware Availability 22 3 6 eed hed ee hd Hob d beh Eek eee Loewe REDO eee Ree RSE EA ODA EE OEE exh edr ds 14 Cal station Pals 3026 522cs 25 eek soe bee ae teen cceeweteuenee ewes dee eeeee acces 15 Product Size IRCCS ANON 2 co roche te eee ae eeedeeeed ehh ee ghee ase pae bose kina eei cep hase ea eek ed et aad 15 PIP Screen Av dlldbllity 240 s4neenebenesbecu
4. 2000 Reboot System Produchon Muy nager Software Utilities Hardware Ltiitees Figure 5 Desktop Security Closing the Production Manager Interface User Guide 3 Click on the Production Manager button The Production Manager interface opens Production Manager System Administration omen KEDE J Bgy iy A Ge Fe ii y Figure 6 Production Manager Interfacetouch Figure 7 Production Manager Closing the Production Manager Interface 1 Close the Production Manager interface at the end of each day 2 Atthe Production Manager screen touch the Exit button in the top right corner of the screen Accessing the ScanStation Admin Interface User Guide Accessing the ScanStation Admin Interface The ScanStation Admin interface allows a system administrator to configure the ScanStation software 1 To access the ScanStation Admin interface touch the Maintenance button at the bottom of the Main Order screen Figure 8 Maintenance Button 2 The ScanStation Admin interface opens to the Admin top menu Figure 9 Admin Top Menu Closing the ScanStation Admin Interface 1 To close the ScanStation Admin interface touch the Exit Admin button at the bottom right corner of the screen 2 When asked if you are sure you want to close the Admin interface touch YES Scan Station Figure 10 Exit Admin 3 The ScanStation Admin interface closes Accessing the Order Control Screen User Guide Access
5. Note You can also enter a name for a newly created photo ID type in the size field em Height The Height field shows the height dimensions of the entire frame to be used for a photo ID em Width The Width field shows the width dimensions of the entire frame to be used for a photo ID am Headroom The headroom field shows the space between the top of the head and the top of the frame em Face Height The Face Height field shows the total space between the headroom line and the chin line Note All these dimensions are in millimeters w Default Settings ID Photo allows you to configure the default settings for image color and cut lines a Grayscale The grayscale setting gives you the choice of printing all photos in color or black amp white 51 ESN Photo Settings Screen ID Photo m ON Click the Grayscale On radio button to set all images to be printed in black amp white m OFF Click the Grayscale OFF radio button to set all images to be printed in color D Note Despite the default setting you have the choice to print any image in color or black amp white in ID Photo a Print Cut Lines The cut lines are placed on the printed image to help you cut the print to the proper size for a particular photo ID type m ON Click the Print Cut lines On radio button to place the cut lines on all images printed m OFF Click the Print Cut Lines OFF radio button to remove the cut lines from all ima
6. PrintTurbine report screen showing various PrintTurbine stats for a specified date range Figure 20 Report Screen You can change the date range by clicking the date drop down menu and selecting a date from the calendar November 2009 10 Environment Settings User Guide Environment Settings Touching Environment Settings will take you to the ScanStation Admin Interface where you can make changes to the system configuration Figure 21 ScanStation Admin Interface Pricing Touching the Pricing button will take you to the Pricing screen where you can set the pricing for different products n Admi baj ipiam jabe Teri oe Pee i Palas Por EHE EELELELLLLELE da Lee Peel een Pa PEEP LEE EELLES ELE LE d kli karer Pel om Fe Figure 22 Pricing SCANSTATION ADMIN INTERFACE 3 To access the ScanStation Admin Interface touch the Environment Settings button on the Admin Top Menu screen Figure 23 Admin Top Menu 11 Admin Actions User Guide 4 The ScanStation Admin Interface opens Figure 24 Admin Interface Admin Actions Touch the Main button at the bottom left of the screen to return to the Admin Top Menu Touch the Apply button at the bottom right of the screen to apply your settings to ScanStation ScanStationl Tab The ScanStation1 tab in the Admin Interface includes these sections em Default Settings am Attention Icon wm Drives wm Languages w Color Step Settings
7. all your images touch the Apply to All button Red Eye Screen Figure 66 Red Eye Screen If you want to remove red eye from your image 1 Center the Manual Red Eye Removal target on the image D Note You can drag and drop the target anywhere on the image 2 To zoom in out on the image use the zoom in out buttons 33 Border Screen User Guide 3 To move the image use the up down left and right arrow buttons To center the image use the center button a lt P v 4 Touch the Manual Red Eye Removal button to apply the removal on the area _ Note You can also use the Auto Red Eye Removal button to remove red eye Border Screen Figure 67 Border Screen To add a decorative border to an image 1 Select a border size from the border size list box 34 Border Screen User Guide D Note The border size list box shows the available border sizes according to the admin configuration If no available borders are found for the selected size you will get an alert message see below ScanStation A Sorry no border avaliable for the selected print size Figure 68 Alert Message 2 Select a border size and touch the Select Border button Browsing Borders Figure 69 Browsing Borders 1 To view a border touch the border name in the border list box The border will preview on the left side of the screen 2 To search for a border type a key word in
8. associated with many types of formal photo IDs SELECT IMAGE SCREEN 4 4 D Cos F i i P T i F F T A i 1538804 ips 1153880 3 ips ENT 153880 1 ipg yes from fi x lab Dasktopt Figure 74 Select Image Screen am Loading Images There are three ways to load images into the ID Photo application a Auto Detect digital media will be auto detected and load the images automatically a Browse Use the Browse button to open a standard browse window to locate any images on the computer or storage media D Note After an image is selected using the browse button the path to that image will be displayed in a field next to the browse button 43 E Select Image Screen ID Photo a E Scrolling Images Once you images are loaded you can scroll through your images in order to pick the best image for your photo ID D Note The number of images loaded displays in the Images Loaded field a Scroll Right Use the Scroll Right button to advance though your images a Scroll Left Use the Scroll Left button to scroll back through your images _ Note A indicator bar will slide between the two scroll buttons in order to give an idea of where you are in your list of loaded images You can also click and drag the indicator bar for faster scrolling through your images asm Selecting an Image Once you have located an image to use for your photo ID you can select t
9. camera orientation you choose the software will automatically rotate the images from that orientation to the proper vertical orientation required for photo IDs a CCW Portrait Click the CCW Portrait button if the camera used to take the photo is in CCW portrait position ID Photo rotates the photo 90 degrees clockwise a CW Portrait Click the CW Portrait button if the camera used to take the photo is in CW portrait position ID Photo rotates the photo 90 degrees counter clockwise a Landscape Click the Landscape button if the camera used to take the photo is in that position No rotation takes place for this camera position am Cancel Use the Cancel button to disregard any changes made on this screen and return to the main Work screen am Save Settings Click the Save Settings button to save any print setting changes made on this screen You are returned to the main Work screen em Exit ID Photo Use the Exit ID Photo button at any time to end your ID Photo session 54 Dai Nippon Printing Co Ltd
10. em Hardware Availability Default Settings 1 You can set Auto Color Correction on or off 2 You can set Auto Red Eye Removal on or off 3 You can set Print Summary Sheet on or off 4 You can set Add Date on or off Adds date to the print 5 You can set the default input source for ScanStation by using the drop down menu to make your selection from a Digital Media Digital Select Film Scanner Flatbed Scanner 6 Youcan set the default print size by using the drop down menu to make your selection from a 4x6 3 5x5 etc 7 You can set the default index print size by using the drop down menu to make your selection from a 4x6 3 5x5 etc 8 You can set the default print quantity by using the drop down menu to make your selection 9 You can set the Print Mode to Pre Judge Print PJP or Auto Print E2 Admin Actions User Guide D Note Pre Judge Print allows you to make changes to the print settings before printing while Auto Print automatically prints the order Attention Icon ScanStation will display an alert icon for any images too small to print properly at the chosen size If the image is smaller than the sizes shown in the number fields the alert icon will display You can set the size by typing it in the number field Figure 25 Attention Icon Drivers D Note Your system is configured at the factory for optimum performance Contact Technical Support prior to adding or removing drives from yo
11. image am Save Image amp Parameters Click the Save Image and parameters button to save the image and the parameters for that image a Reset All Parameters Click the Reset All Parameters button to reset the parameters you set back the image s Original state Visa 50x50 BP Ee UE Figure 83 Parameters buttons am Change Image Use the Change Image button to return to the Select Image screen a Photo Settings Use the Photo Settings button to go to the Photo Settings screen a Print Settings Use the Print Settings button to go to the Print Settings screen 50 Photo Settings Screen ID Photo em Print Use the Print button when you are satisfied with the image and its placement in the stipulated facial area The image will print on a single 3 5 X 5 print em Exit ID Photo Use the Exit ID Photo button at any time to end your ID Photo session Da Note Any images loaded or work done during your session will be lost and cannot be retrieved if you exit the ID Photo application PHOTO SETTINGS SCREEN The Photo Settings screen allows you to configure the size and spacing for a particular photo ID type You can also create and save new photo ID types and settings on this screen Figure 84 Photo Settings screen am Size Use the Size drop down menu to select the type of photo ID desired There are print size stipulations associated with many types of formal photo ID types D
12. printing process After clicking the Pause button you will receive a message asking if you are sure you want to pause the print process click Yes or No Figure 39 Pause Button 20 Understanding the Order Control Screen User Guide D Note If you click Yes another message will appear stating that printing is paused To resume printing click OK j Clicking the Maintenance button takes you to the ScanStation Admin Main Menu Figure 40 Maintenance k Clicking the Order Control button launches the Order Control screen Figure 41 Order Control Click the Start button when you are ready to begin the order process Figure 42 Start Understanding the Order Control Screen The Order Control screen shows all the jobs in the order queue You have the options to cancel and resume orders as well as search for an order and view orders by type Figure 43 Order Control 3 The Select View pane allows you to select what type of orders you want to view Your options are Order List Print Queue or Complete Orders 4 The Search Order pane allows you to search for an order using either the Client ScanStation the order was made on or the Order ID 5 The Print Queue Operations pane allows you to pause resume or cancel orders You can also move orders up and down in the queue based on importance 6 The Print Start pane allows you to choose either PJP or Auto as the print mode for the highlighted orde
13. scanner before proceeding 1 Verify that the scanner lights are not red If the lights are red perform basic troubleshooting steps to identify the issue then contact technical support 2 Submit an order with the 35mm film as the input source Press Start 3 When the Scanning Film message appears on the screen and the film light on the scanner blinks green the scanner is ready to accept film Click OK 24 Loading Images from Film Scanner User Guide Attention Do not insert the film into the scanner until after the light blinks green Inserting it before the green light will cause calibration errors 4 On the Film Scan screen select what type of film you are scanning sa C Balma File Dom Moore k Tea Cais Hep sd Ari Coker APD Gsis Aap ee oP FE Fee me Scanning Film Please Insert Film Failed to Read DX Code E 5 Position the film with the DX code on top and the lowest frame number first The emulsion dull side should be towards the left i J i Hia i ai aO ig AIT a aN Attention lf there are damaged sprockets on the film the damaged part must be at the bottom of the film scanner regardless of the DX code orientation 6 Insert the film into the right side of the scanner until the scanner grabs the film and feeds it into the scanner You should not be able to insert more than three frames into the scanner housing before the scanner grabs the film If you can remove the film from
14. the scanner uncurl the film and try again 7 The Film Scan screen will display the scanning progress 8 When the scan completes a message box will ask if you d like to scan more film Click Yes or No 9 When the film light on the scanner changes to solid orange remove the film from the exit area 10 Continue processing the order as normal 25 Scanning Film Using the Pakon 235 335 Scanner AN Attention If you are experiencing a film jam or the film stops in the scanner follow the instructions in the troubleshooting section Failure to perform correct troubleshooting procedures will void the warranty on your equipment User Guide Scanning Film Using the Pakon 235 335 Scanner 1 Insert the film into the film entrance with the emulsion side up In most cases that will mean the curl of the film roll will be on top of the film strip as it goes into the scanner and the DX code is on top D Note J The emulsion side of the film looks more dull than the non emulsion side 2 Insert the film in ascending frame order 1 2 3 etc 3 Initiate the film scanning through ScanStation 4 If the film scanning starts but the film is not drawn into the scanner apply slight pressure on the film towards the film entrance Scanning APS Film 1 Push the APS eject button to open the APS film holder 2 Insert the APS film into the APS holder Da Note 2 The APS film canister should be placed with the film slot at the b
15. will automatically submit your order for printing 29 PJP Adjustment Screens User Guide PJP Adjustment Screens On the PJP screens you can make further adjustments to your images as well as adjust single images a r Figure 60 PJP Adjustment Screen To adjust the color levels of an image 1 Select the image Selected images will have a yellow box around them 2 You can adjust each color level by entering a value in the box below each color bar Da Note You can rotate and pass images using the buttons on the right side of the screen the same way you would on the Main Preview screen 3 To show the next six images touch the Next 6 Images button To move back six images touch the Previous 6 Images button S Lk Figure 61 Next Previous Six Images To select a single image to enhance 1 Select the image and touch the 1 Image Enhance button Figure 62 1 lmage Enhance 2 You will proceed to the Color screen D Note When you are done editing on any of the following screens hit the back button ScanStation will return to the thumbnails page with your edits saved Images that have been edited adjusted will have a green box around them 30 Color Screen User Guide Color Screen Tre es oe T Mes thes isad i Figure 63 Color Screen 1 When you select a single image to enhance the image will open on the Color screen D Note You can open the selected image on the Crop Size
16. your images from Figure 49 Browse 5 To select images highlight the image filenames in the eft list box and move them to the right list box using the arrow buttons x Ja RE Figure 50 Add Remove Files D Note The top arrow button moves the selected file The bottom arrow button moves all the files in a folder 6 You can choose the types of image files to view using the File of Types drop down menu 7 When you are ready to continue touch the OK button To go back choose Cancel Loading Images from Film Scanner Preparing Your Film for Scanning Before scanning the film must be cleaned and you must verify that there are no tears or defects in the film surface You can only scan strips with four or more frames To decrease the likelihood of having less than four frames in a strip sleeve the film from the tail end 23 Loading Images from Film Scanner User Guide 1 Always wear white lint free lab gloves when handling film PERE RE ERE REE COR 8 OR Gl 3 Inspect the film for any twin check tape that has the adhesive side exposed or is covering any sprocket holes Other tape besides twin check on the film must be removed 4 Inspect the film for any tears or other defects that might cause the film to jam in the scanner Make sure the edges of the film header and trailer are smooth and at a right angle Scanning Film Using the Pakon 135 135 Scanner Da Note Be sure there is no film in the film
17. 0465 66 80 5400 0 ECE HES OO DTT ENO KEES CASS ESS aoe SO Z Accessing the ScanStation User Ditertace lt ss6 os0 60h 604 00 44404 oh b6G aS 568 Se ed 28s Ose ew Kee ees eeewee news 2 Accessing the PrintTurbine Interface s lt 64 s0 o 54 H 6 a8 44 0 8G aw 285A OSA SERS SOE EN ES OSSE 2 FSR 5NS OER SEES 3 Accessing the Other Interfaces lt 5 cs 4 a4 os oa eee wees basis s eee eae e Mee o4 eS 5 eee sae ase eee ees 3 Accessing the Production Manager Interiace 24 lt 606 sens esos Pears 6554s Se4 Seb OSes oO bb bs eH Ko 8 ee Esser 3 Closing the Production Manager Interlace lt lt 6 6 0 lt 6 664558 5 5665s 0685559 55 4 90055 6 TUNG OS 95h 6S SSE TEESE SES 4 Accessing the ScanStation Admin Interface oc os 6 06 06 06005 40966 6050 8600608 U EES SESS OS OWE OES DO Ew ECO RSS OOS 5 Closing the ScanStation Admin Interface ccccv cece cece ccs ee ee eeeeeseeeesecessesesene 5 Accessing the Order Control Screen scsesccccoesccocooosoososososceceeceeecescosososoososoooeseoeees 6 Closing the NL 2000 Software sssssssossesososesososecosooseoosoceooooeeeoosoeeeoo 6 Restarting the NL 2000 Software ssssssosssssecsosooossssecsoooooossoseeeeooooooo 7 Rebooting the Computer sssssssssssosecoosoeeosossecosooeeooooeeooooceoosooeeeoooo 7 Shutting Down the Computer ssssssssssccososccooosecososecosooceeoooocseooooeeeoooo 8 Powering OFF the System Hardware w 46iss 62min ee 4a dase ne eee 4s OAwee oe oo sO bow eae es 8
18. DNP DRY MINILAB SYSTEM NL 2000 Software User Guide Version 1 1 2009 01 29 FOTOLU sfo more than a photo E Acknowledgements ACKNOWLEDGEMENTS The information contained in this document represents the current view of Dai Nippon Printing Co Ltd on the issues discussed as of the date of publication Because Dai Nippon Printing Co Ltd must respond to changing market conditions it should not be interpreted to be a commitment on the part of Dai Nippon Printing Co Ltd and Dai Nippon Printing Co Ltd cannot guarantee the accuracy of any information presented after the date of publication This document is for informational purposes only Dai Nippon Printing Co Ltd MAKES NO WARRANTIES EXPRESSED OR IMPLIED AS TO THE INFORMATION IN THIS DOCUMENT Complying with all applicable copyright laws is the responsibility of the user Without limiting the rights under copyright no part of this document may be reproduced stored in or introduced into a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise or for any purpose without the express written permission of Dai Nippon Printing Co Ltd Dai Nippon Printing Co Ltd may have patents patent applications trademarks copyrights or other intellectual property rights covering subject matter in this document Except as expressly provided in any written license agreement from Dai Nippon Printing Co Ltd
19. Pakon 235 335 Scammer cccccccccccscscscsscscscsccccccsssssccescssssesssces 26 pe anne APS Fi o2t25555e55 sce ss sesso e ees eesee ees eu ceientcentc beens resets eotaectenaweceees 26 Loading Images from Flatbed Scanner 104 sinparsee se iiees siee ee iene ins ewen eh Obese bette sede eee eee aeee aes 26 Presio SCICOUS 565045 os 66 55 ees ree SP EEG SS RSET TAS Se EREA NTE RNAAR ENARA 28 Mani Previ WoC e eae 5 tebe eweett head me tetesieeeeetertee a wetness cnee sue eiweeetces 28 PIP Adjustment SCUCUNS cou og o446 bone ee cue we Sawas Cee CHEE U 6 Woes ee eviews ouse ceric ane ree en tes dents seus ees 30 COlOE SCCM oc et stn E Geen ee sen careers EN T Senn ee ere sanwece see tesa tar ae eeetuessd 31 JO ere vo ee ee ee ee ee ee ee ee 32 DA le 2 ea ee ee ee eee eee A eee ee ee ee ee ee ee ee ee er cee eee 33 RedEye SCreeih 5 c0 25 44 sas eee aio eee oe nees eee sb 068 ete Pee how aban S9S be 5a reese bower ge tees uree es 33 Border Sre cee eee see hee eda ce se che tees se sece eee eae hus ees E 34 Finalizine Print Order o4 645 04 6h ao bees Rha ses eh ee bobs Rhee tee eh eo beeen heehee ces 38 4 NL 2000 Hardware Troubleshooting NL 2000 Computer Diaoram scdoucacaraseeedeediee Gentes toantes bacevtesaieenteces codons 41 POLLW ALG LOD ISSUCS 4 44464004490 00004006 b400o4 5598s 488s bee eee beeen ee ends en ds been an 41 5 ID Photo Select MACE DClCOl 46 45 oh5 54 06 0a EE SESE HORE MORE ES SESE ONES E rA 43 INIAMD YY e a 04454 c0ateueseo
20. Red Eye or Border screens by touching the buttons along the bottom of the screen 2 You can set the color levels using the and buttons for each color bar 3 To turn Auto Color Correction ON OFF press the Auto Correction button 4 To adjust the contrast use the and contrast buttons to the right of the screen ram 5 You can turn the image to black and white or sepia tones by pushing the appropriate buttons et ms ot oe 6 To undo the changes you made press the Undo Changes button To apply the changes to all your images touch the Apply to All button al Crop Screen User Guide Crop Screen Figure 64 Crop Screen 1 To zoom in out on the image touch the Zoom In Zoom Out buttons 3 To rotate the image touch the Rotate Image bution 4 To move the image use the up down left and right arrow buttons To center the image touch the center button a lt P Yy 5 add a date stamp to the right corner of the image touch the Date Stamp button D Note The date format will appear according to the Admin configuration 32 Size Screen User Guide Size Screen Arl ye Lael Figure 65 Size Screen On the Size screen you can select a size and quantity for the selected image 1 To select a size highlight the size you want in the list box 2 Use the or buttons to change the quantity for the selected size 3 To apply the size and quantity to
21. Size Registration 1 You can enter a descriptive name for each print size by entering a name in the text field and hitting the Update button It is recommended that the name contain less than six characters Da Note The original Print Sizes and Input Types cannot be configured 2 Check the Available box if you would like to utilize the print size with each input type PJP Screen Availability You can set which screens are available in ScanStation when the PJP print mode is selected The screen options are a Select Size amp Quantity a Red Eye Screen a Border Screen Screen Figure 31 PJP Screen Availability 15 E Date Format for Date Stamp User Guide Date Format for Date Stamp You can set which format the date appears in with the date stamp turned on The format options are a YYYY MM DD a MM DD YYYY a DD MM YYYY Figure 32 Date Format D Note YYYY is the year MM is the month DD is the day Back Print Setting You can turn back printing on or off by checking the Back Print box There can be two lines of back printing To set each line 1 Choose the Line 1 or Line 2 setting by clicking the radio button 2 To add back print information to the line highlight which item you want in the right list box and add it to the left list box using the arrow buttons To remove an item highlight it in the eft list box and move it to the right list box Figure 33 Add Remove File Buttons
22. being used Da Note Only 3 5x5 size prints are supported in ID Photo a Image Spacing ID Photo allows you to set the amount of space between images on a single print a 1mm Radio Button Click the 1mm radio button to put 1mm of space between each image on a single print a 3mm Radio Button Click the 3mm radio button to put 3mm of space between each image on a single print a 5mm Radio Button Click the 5mm radio button to put 5mm of space between each image on a single print am Layout Orientation ID Photo allows you to set the orientation of the images on the print a Portrait In portrait mode images are placed across the short plane of the print a Landscape In landscape mode images are placed across the long plane of the print em Margin ID Photo allows you to set the margins on a print The margins are the amount of space between the out edge of the photo and the edge of the print a Margin Top Use this field to enter the size of the top margin in millimeters a Margin Bottom Use this field to enter the size of the bottom margin in millimeters a Margin Left Use this field to enter the size of the left margin in millimeters a Margin Right Use this field to enter the size of the right margin in millimeters 53 Print Load Settings Screen ID Photo am Camera Position You can set the fixed position of the camera in ID Photo Based on the
23. d ee ceue reuse eye cays wea Gunes eeae Ree eee eeu nese E 15 Date Format or Date Stam 40 06 s ot oh cna exh esas ces eee daw eet ne hee aed cee eee a 16 ack ime SoS pace ceeceueteena here sae ued Roe uae weer ee wee 4 eee ee ene wee peu ees saan 6 emer ees 16 Pili SCANMCE VAD arg bce bees ote eee oe ease eae es cee cere ee eee eee re ew ee erences 17 Order Catcher FoDe sro ce ened oe een ee cane easy new ereeeeewe eee keene eae Seue ee see eee n ewes eneee ees 17 3 The ScanStation User Interface The Main Order SereGh 642454 05654 450460 65 e060 00 6S eGR SHE REeEE OS DOO aE HE Rou TEeee eee ea 19 Basic Maintenance Understanding the Main Order Screen Option Buttons 0 ccc ccc ccc ccc cece ec cece eee cece cesses eeseees 19 Understanding the Order Control Secrets sds utes diane e khtwodaese wh btaeebewedetw ier at aee sewn owns we 21 NGAGING IMPS gc cee 5 5 oa se NONTON EEES NESES EVA eee wees 22 Loading Images from Digital Media s o 6066446646 466005 55654654 2540S R ESTES S46 ORES RS ESTEE DE ERS OOS 22 Loading Images from Digital Media Select i4664040465240e4000000 25 00056496 5064606002000550460005 64000645 22 Loading Images from Film Scanner ossssssseccsssosoooooecccescecccsosooocecesssososoceceeseeoooooo 23 Preparing Your Film for Scanning 22 6 a2 dsd cade dent dagudeadaeeubisacadasee dance ducehwsnsaredndsceeds 23 Scanning Film Using the Pakon 135 135 Scanner 0 cc ccc eee eee eens 24 scanning Film Using the
24. e Buttons 2 To Update the name of an order catcher select it in the list and enter the new name in the text field Hit the Update button EEEETERET EIsseesa5S q F T 4 Ld E F b ka Ld i i LE w t L ih nnnm ieee Figure 36 Order Catcher Registration 17 Film Scanner Tab User Guide 18 THE SCANSTATION USER INTERFACE THE MAIN ORDER SCREEN The Main Order screen is the gateway to the NL 2000 ScanStation interface From this screen you can am Preview Images am Place Orders am Access the Scanstation Admin Interface am Access the Order Control screen em Launch the ID Photo application Understanding the Main Order Screen Option Buttons Select Input Source and Print Size A Figure 37 Main Order Screen a Atthe top of the screen is the Message bar where instructions for the current screen appear b Atthe top right corner of the screen is the Order Status which shows how many Open On Hold orders are in the print queue c On the left side of the screen is the Printer Status pane The printer names media sizes media remaining and printer status will display d The Input Source panel is where you select what kind of input your media is coming from Depending on your configuration you can choose from the following types of input 19 Understanding the Main Order Screen Option Buttons User Guide m Digital Media xD Picture Card SmartMedia Compact Flash Memory Stic
25. ents Figure 77 Input Angle a 90 Degree Rotation Click the 90 degree radio button to set the rotation to 90 degree increments a 1 Degree Rotation Click the 1 degree radio button to set the rotation to 1 degree increments a Rotate Left Use the Rotate Left button to rotate the image in a counter clockwise direction The degree of rotation is based upon the Input Angle setting a Rotate Right Use the Rotate Right button to rotate the image in a clockwise direction The degree of rotation is based upon the Input Angle setting a Reset Use the Reset button to return the image to its original input angle rotation Any image rotation you have done will be lost wm Size Use the Size drop down menu to select the printed size of the image There are print size stipulations associated with many types of formal photo ID types The available size selections are a 30mm x 24mm Driver s License a 40mm x 30mm General Common a 45mm x 35mm Passport a 50mm x 40mm International Driver s License a 50mm x 50mm Visa 46 Main Work Screen ID Photo Figure 78 Size Layout and Copies selection am Layout Use the layout drop down menu to select the number of images produced on one print The minimum images per print is one 1 the maximum per print is up to eight 8 depending on the size selected am Copies Use the and buttons to set the number of prints you want f
26. ges printed _ Note Despite the default setting you have the choice to print any image with or without cut lines in ID Photo a Lock Data The Lock Data setting allows you to prohibit deleting the photo settings of an ID type using the Delete button m ON Click the Lock Data ON radio button to disallow photo setting data to be deleted or modified m OFF Click the OFF radio button to allow photo setting data to be deleted or modified w Cancel Use the Cancel button to disregard any changes made on this screen and return to the main Work screen am Delete Settings Use the Delete Settings button to delete any settings that have been saved for a particular ID type The ID type is also removed from the drop down menu am Save Settings Click the Save Settings button to save any photo setting changes made on this screen You are returned to the main Work screen em Exit Photo ID Use the Exit ID Photo button at any time to end your ID Photo session 52 Print Load Settings Screen ID Photo PRINT LOAD SETTINGS SCREEN The Print Load Settings screen allows you to configure the output settings for the final print This is helpful because there are many size and spacing stipulations associated with different types of formal photo IDs Figure 85 Print Settings Screen wm Print Server Name This field displays the printer connected to the system am Paper Size This field displays the paper size
27. hat image by clicking on it Ja Note gt A yellow box will frame the selected image wm Rotating an Image After selecting an image to use it may be necessary to rotate the image into the proper vertical alignment Each image has its own set of rotate buttons located above the image a Rotate Left Use the Rotate Left arrow button to rotate the selected image in 90 degree increments in a counter clockwise direction a Rotate Right Use the Rotate Right arrow button to rotate the selected image in 90 degree increments in a clockwise direction a E Continue After you have selected an image and rotated it to the proper orientation use the Continue button to advance to the next screen em Exit ID Photo Use the Exit ID Photo button at any time to end your ID Photo session Ja Note Any images loaded or work done during your session will be lost and cannot be retrieved if you exit the ID Photo application 44 Main Work Screen ID Photo MAIN WORK SCREEN After you have selected an image and rotated it to the proper vertical orientation you are ready to set the image s size placement and color for your photo ID Figure 75 Main Work Screen w Zoom You can zoom in or zoom out to increase or decrease the size of the image within the viewable frame a Zoom In Use the Zoom In button to increase the size of the image within the viewable frame a Zoom Out Use the Zoom Out button to decrease the si
28. ialization Screen Figure 1 Initialization Screen Once the initialization is complete touch Continue to open the Main Order Screen Figure 2 Main Order Screen Accessing the PrintTurbine Interface The PrintTurbine interface allows you to troubleshoot the NL 2000 system with Technical Support You can also view any print issues and restart PrintTurbine Attention Always leave the PrintTurbine interface running Do not exit this utility unless you are requested to do so by Technical Support EE Accessing the Other Interfaces User Guide Da Note Press ALT TAB and tab over to the PrintEngine icon on the toolbar You can toggle to this interface when necessary 1 The PrintTurbine interface automatically starts when the computer is powered ON This interface is active in the background while you work in the ScanStation or Production Manager interfaces printturbine ECI Figure 3 PrintTurbine 2 Once you have opened the interface use the Hide button to minimize the interface ACCESSING THE OTHER INTERFACES Accessing the Production Manager Interface The Production Manager interface allows you to manage orders that have been submitted by the ScanStation interface or by client machines 1 To access the Production Manager interface hit ALT TAB and tab over to the SiteKiosk icon on the toolbar Figure 4 SiteKiosk Icon 2 The Desktop Security screen will open FOTOLU sfo S wf Restart L
29. iew the images you want to print 1 Use the arrow buttons to navigate through the images 2 The top and bottom arrows move to the first and last page 3 The middle arrows move to the next and previous page To enlarge an image 1 Select the image and touch the Enlarge button Figure 54 Enlarge Image 2 You can then view the enlarged image and make frame adjustments according to the nudge configuration in Admin Figure 55 Enlarge Photo 28 Main Preview Screen User Guide To pass add images 1 Select an image and touch the PASS button This tells ScanStation you DO NOT want to print the image Figure 56 Pass D Note A PASS icon will appear on the images you pass D 2 Select an image and touch the ADD button This removes the pass icon and the image will print Figure 57 Add To rotate an image Select the image and hit the Rotate 180 button to rotate the image 180 degrees Figure 58 Rotate 180 Da Note This button is primarily used to adjust images that get scanned upside down in the scanners To change the Print Mode 1 Touch the Print Mode button The current mode will display on the button Figure 59 PJP Auto Mode When you are ready to continue touch the OK button SB Note 2 If you are in PJP print mode you will be able to make further enhancements and corrections to your images after this screen If you are in Auto print mode clicking the OK button
30. ing the Order Control Screen The Order Control screen shows all the jobs in the order queue You have the options to cancel and resume orders as well as search for an order and view orders by type 1 From the Main Order Screen touch the Order Control button at the bottom of the screen Figure 11 Order Control Button 2 The Order Control Screen will open Figure 12 Order Control Screen 3 To exit the Order Control screen touch the back button at the bottom right of the screen CLOSING THE NL 2000 SOFTWARE 1 To access ScanStation Admin touch the Maintenance button at the bottom of the Main Order screen 2 The ScanStation Admin interface opens to the Admin Top Menu Figure 13 Admin Top Menu 3 Touch the Shutdown ScanStation button on the bottom left corner of the screen D Note You can also shutdown NL 2000 from the Desktop Security screen Restarting the NL 2000 Software User Guide RESTARTING THE NL 2000 SOFTWARE 1 Hit ALT TAB and tab over to the SiteKiosk icon on the toolbar 2 The Desktop Security screen will open FOTOLUS O Restat L 2000 Reboot Sistem Production Manager Software Utibhes Hardware Lilies Figure 14 Desktop Security 3 Touch the Restart NL 2000 button Figure 15 Restart NL 2000 4 The software restarts REBOOTING THE COMPUTER 1 From the Desktop Security screen touch the Reboot System button Figure 16 Reboot System 2 When the dialog b
31. k Memory Stick PRO SD Memory Card MultiMediaCard Memory Stick Duo Memory Stick PRO Duo MiniSD Card Reduced Size MultiMediaCard Cr es m Digital Select Ja Note By choosing the Digital Select option you can choose to load only select images from digital media Only one input source can be specified in each order If multiple input sources are needed for an order place a separate order for each input source w Film Scanner mw Flatbed Scanner e The Print Size Quantity panel allows you to choose the size and quantity of the prints The sizes will display in the drop down menu according to what is configured in Admin By clicking the or buttons you can change the quantity of prints f The Print Mode Auto Color Correction panel is where you can change the Print Mode from PJP to Auto by clicking on the icon You can also turn Auto Color Correction on off in the same manner Da Note Icons will be highlighted when they are selected g The Options panel lets you add an index print or CD to the order You can also add white margins to the prints Pushing this button will add white margins to the whole order _ Note The following print sizes supprt white margins 3 5x5 4x6 4x7 4x8 4x10 4x12 5x7 6x8 6x9 8x10 and 8x12 h Touching the ID Photo icon at the bottom left of the screen will launch the ID Photo application see ID ct Photo chapter Figure 38 ID Photo i The Pause Print button pauses the
32. ncrease or decrease the value rac 6 When you are finished hit the back button ScanStation will save the bordered image in your order Da Note At any point in time during photo editing if you need to return to the previous page touch the Back button at the top of the screen To start over completely touch the Start Over button FINALIZING A PRINT ORDER To finalize an order D Note You will only be able to review the items in your order if you are in PJP print mode When you are in Auto mode your order is submitted without review 1 Touch the OK Submit button from the PJP thumbnail screen 38 Finalizing a Print Order User Guide 3 Review the items Use the scrollbar to move up and down the order list 4 To delete an item from the order touch the X button to the left of the item You will be asked if you are sure you want to delete the item Click OK or Cancel Figure 71 Message 5 When you are satisfied with your order touch the submit button 6 ScanStation will show you the progress of your order submission Figure 72 ubmitting Order D Note If you have ordered a CD the screen will update you on the CD burning progress See below CE Prectnsing a compiea Dier fi of of Figure 73 CD Burning 39 Finalizing a Print Order User Guide 40 NL 2000 HARDWARE TROUBLESHOOTING NL 2000 COMPUTER DIAGRAM A Mouse Port E Touch screen LAN B Keyboard F To
33. nne TATE actu EE ET T EESTE 45 Photo SCILINGS SCPC 5 5 aaaacus tintaren eana Gus NAAT ORE Nees eee Ree een Seas eaa 31 Print Load Settings SCEN 644507540555 eu wee end oe Seesaw deve see seuw ere teeresaeesees 53 GETTING STARTED POWERING ON THE SYSTEM HARDWARE 1 Each day the system must be powered ON 2 Open the printer cabinet front door and locate the power switch at the side of the cabinet 3 Press the power button to power ON the system The light turns blue to indicate that the cabinet has power 4 Verify that all of the printers are powered ON and have a blue ready light WB Note gt Check the Basic Operations manual for instructions on what to do if no lights are on 5 Close the printer cabinet door 6 Press the power button on the front of the computer 7 Verify that all of the cabinet components powered ON Starting the NL 2000 Software STARTING THE NL 2000 SOFTWARE User Guide Accessing the ScanStation User Interface The ScanStation interface allows you to input orders for processing This is the main interface you will use on a day to day basis Da Note 2 l When the computer is powered ON a menu appears that allows you to back up or restore the system image if necessary The ScanStation software will launch automatically or you can choose the NL 2000 option from the menu and press Enter The ScanStation interface automatically starts when the computer is powered ON The interface opens to the Init
34. or the selected image a Copies Button Use the button to decrease the number of prints wanted for the image a Copies Button Use the button to increase the number of prints wanted for the image am Change to Grayscale Use the Change to Grayscale button to change the image from color to black and white D Note After an image has been converted from color to grayscale the Change to Grayscale button changes to Revert to Color Bi oe DE DE De ja o E Figure 79 Grayscale Contrast and Color adjustment 47 EE Main Work Screen ID Photo Yisa 50x50 A W Ee Figure 80 Grayscale Revert to Color screen differences am Revert to Color Use the Revert to Color button to change the image from black and white back to color a W B Adjust Use the W B and buttons to adjust the white balance of the grayscale image a W B Button Use the button to lighten the white balance of the image a W B Button Use the button to darken the white balance of the image D Note The white balance option only appears when an image has been converted from color to grayscale E EM o a a 8 L Figure 81 Revert to Color White Balance and Contrast adjustment Contrast Adjust Use the Contrast and buttons to adjust the contrast of the image 48 bN Main Work Screen ID Photo a Contrast
35. ottom facing towards the film scanning chamber 3 Close the film holder 4 Initiate the film scanning through ScanStation Loading Images from Flatbed Scanner 1 Select Flatbed Scanner as the Input Source on the Main Order screen 2 Make the appropriate adjustments for the order and press the Start button S 26 Loading Images from Flatbed Scanner User Guide 3 Place the picture face down on the scanner glass in the corner Figure 51 Scanner Position Da Note J If there are tabs on the edge of the scanning surface do not place the photo under the tabs Align the photo so that the edge of the photo is next to the tab and evenly spaced from the edge of the scanning surface 4 Close the scanner lid being careful not to move the picture 5 When the Epson scanner utility appears follow the onscreen instructions to scan your photo Ta sana Fadl Aup Mieke pecans ce breil he Peale pos ee bo eae Per cad Tiri Ey Cai lataan aed citer opara ca te Comtesse butters i han ele D ara Dina Pep lem bec Sete cea ec mr J orca change fhe pcan mode ir fhe Mede tet bow be a Pe op agt of ee merce Figure 52 Epson Software 6 When asked if you want to scan more images click Yes or No 2d Preview Screens User Guide PREVIEW SCREENS Use the Preview screens to make enhancements and corrections to images Figure 53 Main Preview Screen Main Preview Screen On the Main Preview screen you can prev
36. ox appears select YES 3 The system reboots Shutting Down the Computer User Guide SHUTTING DOWN THE COMPUTER 1 From the Desktop Security screen touch the Shutdown System button Figure 17 Shutdown System 2 When the dialog box appears select YES 3 The computer shuts down POWERING OFF THE SYSTEM HARDWARE 1 Verify the computer has been shut down 2 Power OFF all other devices by pressing the two main power switches in the ScanStation and printer cabinets THE SCANSTATION ADMIN INTERFACE OVERVIEW Admin Options Figure 18 Admin Top Menu Use the buttons on the ScanStation Admin Top Menu to view the different Admin option screens such as wm System Information opens InfoCenter screen with information about the NL 2000 operating system am Report opens the PrintTurbine Report screen with various PrintTurbine stats for a specified date range am Environment Settings opens the ScanStation Admin Interface where system configurations can be made em Pricing opens the Pricing screen where product pricing is set E System Information User Guide System Information Clicking on System Information will take you to the InfoCenter screen where you can view information about the NL 2000 system you are using You can view different information by touching each of the options on the left hand corner of the screen Figure 19 System Info Screens Report Clicking the Report button will open the
37. r pal Loading Images User Guide 7 The Delete button will delete the order highlighted in the order list Figure 44 Delete 8 You can exit Order Control by hitting the Back button lt Figure 45 Back 9 Highlight an order in the order list and touch the Order Information button to view details for that order Figure 46 Order Information LOADING IMAGES D Note A dialog box will display when the maximum number of images has loaded on Scanstation Any images past the number allowed will not load on Scanstation Loading Images from Digital Media 1 Select Digital Media as the Input Source on the Main Order Screen 2 Make the appropriate adjustments for the order and press the Start button 3 ScanStation will look for digital media to load Figure 47 Looking for Digital Media Da Note If no digital media is detected within 5 seconds the message will change to Insert your Digital Media The message will appear until digital media is found or the Close button is pressed 22 Loading Images from Digital Media Select User Guide Loading Images from Digital Media Select 1 Select Digital Select as the Input Source on the Main Order Screen 2 Make the appropriate adjustments for the order and press the Start button 3 The File Selection screen will open Figure 48 File Selection 4 To browse for a folder hit the browse button and select what folder you want to choose
38. r channel would w Brightness Button Use the button to decrease the brightness of the image E Brightness Button Use the button to increase the brightness of the image a Reset Color Use the Reset Color button to return the image to its original color Any color changes made will be lost Ja Note Prior to any color changes the Reset Color button is grayed out am Apply Auto Correction Use the Apply Auto Correction button to auto correct the color of an image Da Note Not all Auto Corrections will be an improvement over the original Auto Corrected color is subjective am Apply Auto Red Eye Use the Apply Red Eye button to automatically remove the red eye effect from the image _ Note lt is possible that not all red eye effects will be removed using this feature 49 SSeS Main Work Screen ID Photo Figure 82 Auto Corrections and Cutlines em Print Cut Lines The cut lines are placed on the printed image to help you cut the print to the proper size for a particular photo ID type a Print Cut Lines Yes Click the Yes Radio button to print the cut lines on the printed photo a Print Cut Lines No Click the No Radio button to print the photo without the cut lines am Save Parameters Click the Save Parameters button to save any photo ID parameters for later use am Apply Saved Parameters Click the Apply Saved Parameters button to apply saved parameters to the selected
39. the furnishing of this document does not give you any license to these patents trademarks copyrights or other intellectual property ScanStation PrintMaster iStation PicViewer Photo Theater MyPhotoLab NexLab PixelWare LabServer One Touch Digital Prints and One Touch Digital Printing are trademarks of Dai Nippon Printing Co Ltd The names of actual companies and products mentioned herein may be the trademarks of their respective owners PrintRush is a trademark of Dai Nippon Printing Company LTD Dell is a registered trademark of Dell Inc oc Anywhere is a registered trademark of Symantec Corporation Kodak is a trademark of Eastman Kodak Company Epson Stylus is a registered trademark of Seiko Epson Corporation and Sony is a registered trademark of Sony Electronics Corporation GO Software PC Charge Win Charge are trademarks of GO Software Inc IrDA is a registered trademark of Infrared Data Association Bluetooth is a registered trademark of the Bluetooth SIG and Macromedia and Flash are registered trademarks of Macromedia Inc All other trademarks are the property of their respective owners Dai Nippon Printing Co Ltd 2000 2006 Dai Nippon Printing Co Ltd All rights reserved Basic Maintenance 1 Getting Started Powering ON the System Hardware o04444 64446600 sboee bay 4454444 86480864 sed see ew ween 1 Starting the NL 2000 Software os 6 065 64 66 66 5 0
40. to the text field and hit the search button AU cS 3 To apply the border to your image touch the Apply Border button 4 You will proceed to the Text screen 35 Border Screen User Guide Adding Text POP Add Test te Border Figure 70 Adding Text 1 To change the font style of your text touch the Font Style button ht 2 The Font Style window opens Choose the size and style you want and click OK 3 To change the font color of your text touch the Font Color button 4 The Font Color window opens Choose the color you want and click OK 5 To add your own text to the border type into the text field Touch the Apply Text button 36 Border Screen User Guide D Note You can enter text up to 100 characters 6 To adjust the alignment of your text to the left center or right use the corresponding alignment buttons 7 When you are satisfied with your border touch the OK button Da Note You will return to the Main Border screen where you can make additional adjustments to your image 2 Torotate the border touch the Rotate Border button 3 To rotate the image touch the Rotate Image button ee 37 Finalizing a Print Order User Guide 4 To move the image use the up down left and right buttons To center the image touch the center button a lt P Yy 5 To change the quantity of the border print use the and buttons to i
41. uch screen J Tower C Parallel G Flatbed Scanner D LED H Film Scanner SOFTWARE TOP ISSUES ScanStation Top Issues List Symptom Cause Recommended Action When the system is first started a Printers are not plugged into Verify the devices are plugged in new device is detected correct USB ports correctly and reboot Touching the screen using the ScanStation is unresponsive Restart ScanStation mouse and or keyboard have no effect Touching the screen using the ScanStation and PrintTurbine are Restart NexLab which includes mouse and or keyboard have no unresponsive ScanStation and PrintTurbine effect and no jobs are printing 41 Software Top Issues User Guide Symptom Cause Recommended Action Touchscreen is unresponsive Touchscreen cables are not Verify the devices are plugged in plugged into correct ports correctly and reboot When touching the screen the Touchscreen monitor is not Calibrate the touchscreen using cursor does not move where your calibrated instructions in the Basic Ops manual finger is on the screen ScanStation does not connect to ScanStation Admin configuration Update ScanStation Admin PrintTurbine file entry for PrintTurbine is configuration file with the correct incorrect PrintTurbine IP address ID PHOTO ID Photo is an easy to use application for making photo IDs While easy to use ID Photo has the precision required to produce high quality photos while meeting the rigid stipulations
42. ur system To add or remove drives from the NL 2000 system 1 Enter the drive letter in the text field and touch the Add button to add a drive to your system 2 To remove a drive highlight the drive in the drive list and touch the Remove button a R E Figure 26 Drives D Note a l Only one alphabetical character can be entered at a time No numbers or symbols can be entered 13 Admin Actions User Guide Languages You can select what language is used in ScanStation by highlighting the language you want to use Figure 27 Languages Color Step Settings Da Note Your system is configured at the factory for optimum performance Contact Technical Support prior to changing the step settings The color step settings are adjustable Change the step settings by entering new values in the appropriate boxes Figure 28 Color Step Settings Hardware Availability em Film Scanner Expectation check this box to check the film scanner connection at the Initialization screen em Flatbed Scanner Expectation check this box to check the flatbed scanner connection at the Initialization screen Figure 29 Hardware Availability 14 ScanStation2 Tab User Guide ScanStation2 Tab The ScanStation2 tab in the Admin Interface includes these sections am Product Size Registration am PJP Screen Availability em Date Format for Date Stamp em Back Print Setting Product Size Registration Figure 30 Product
43. ze of the image within the viewable frame a Reset Zoom Use the Reset Zoom button to return the image to its original size Any Zooming you have done will be lost D Note Prior to any zooming change the Reset Zoom button is grayed out Figure 76 Zoom Move and Fine Mode adjustment 45 Main Work Screen ID Photo am Move Image Use the move buttons to place the image within the mandatory head and chin placement lines within viewable frame a Move Up Use the Move Up button to move the image up within the viewable frame a Move Down Use the Move Down button to move the image down within the viewable frame a Move Left Use the Move Left button to move the image left within the viewable frame a Move Right Use the Move Right button to move the image right within the viewable frame a Fine Mode Click the Fine Mode checkbox for a finer degree of image movement control within the viewable frame _ Note With Fine Mode checked on five movement clicks is equal to one movement click in regular mode a Reset Move Use the Reset Move button to return the image to its original position within the viewable frame Any image movement you have done will be lost _ Note Prior to any move changes the Reset Move button is grayed out sm Input Angle Use the Input Angle feature to rotate the image if necessary The 1 degree of rotation offers more precise rotations for slight adjustm
Download Pdf Manuals
Related Search