Wireless Communication Station User's Manual ENGLISH
Contents
1. W gt Attach the BS 1000 to the PC using the provided USB cable aliti xj E 4 a pl al i ane Oei Cau Berd te sur aper Penri at Pet Een es EH EF Basic Patt Start the patrol management software and go into the Connect screen Set the reader into the indentation on the BS 1000 For reader model BP 2002S please place its reading head between the status lights and set its top flush against the inside edge of the BS 1000 gt If the reader time is different with the currently using PC the software will automatically calibrate reader s internal clock The software will automatically upload and process the data Reading Signal Cards Using the BS 1000 gt The BS 1000 can be used as a signal card reader by the patrol management software which is convenient when adding signal cards to the system Attach the BS 1000 to the PC using the provided USB cable Place the signal card in the region between its LED status lights The card number will be displayed on screen and be recorded by the software Troubleshooting Not able to upload data from the guard tour readers Check to see if the reader is placed properly on the unit The reading head of the reader should be between the status lights of the unit and its top should be flush against the inside edge of the unit The patrol management software is not able to find the BS 1000 unit Please check the condition of the hardware install2. ENGLISH BlueCard Wireless Communication Station User s Manual BS 1000 Please read this manual carefully before starting to operate the station NICAT C C S ON er USA oe AL Co SSiywO gt L Main Features The BS 1000 Communication Station Comm Station serves as a direct connection between the PC and the guard tour reader to allow for immediate uploading of reader data as well as initialization of the readers TABLE OF CONTENT DESCRIPTION OF THE BS 1000 HARDWARE STATUS LED LIGHTS AUDIO SIGNALS POWER SOURCE OPERATING INSTRUCTIONS TROUBLESHOOTING BS 1000 DATA SHEET DISCLAIMER Description of the BS 1000 hardware Status LED Lights in the descriptions below up indicates the direction on the BS 1000 where the status LED lights are located Red LED Upper Left Flashing connected to a guard tour reader Green LED Lower Left Flashing the BS 1000 is operating normally Red LED Upper Right The BS 1000 is turned on Green LED Lower Right Flashing the BS 1000 is operating normally Audio Signals Long Beep once The BS 1000 has been turned on and is operating normally Power Source USB Connection Operating Instructions Uploading guard tour data from the guard tour reader to the PC BS 1000 is able to upload data from guard tour readers wirelessly Compatible readers include models BP 2002S BP 2002F BP 2002K BP 2002 W and BP 2002B
3. ation by going into the Windows Device Manager Please contact with the technology support tf you can not solve the problem by using above solutions BS 1000 Data Sheet 159x79x33mm Connection With Readers RFID Wireless Connection DISCLAIMER The information in this documentation is subjective to change notice and does not represent a commitment on the part of Bluecard Software Technology Co Ltd No part of the this manual may be reproduced or transmitted in any form or by any means electronic or mechanical including photocopying recording or information storage and retrieval systems for any purpose other than the purchaser s personal use without the written permission of Bluecard Software Technology Co Ltd All trademarks mentioned in the document belong to their respective owners BlueCard Bluecard Software Technology Co Ltd
Download Pdf Manuals
Related Search