Installation manual @]
Contents
1. SCANCON Incremental encoders Installation manual ATEX This installation manual is valid for encoder type 2CEX only For your safety please read carefully Follow this manual carefully otherwise the ATEX certification will be repealed Electronic information will be delivered together with each product 1 Installation must be handled by skilled personals only 2 Observe precaution for handling of electrostatic sensitive devices 3 Installation with power off ONLY 4 Connect to earth ig first 5 Connect GND 6 DO NOT slam with hammer or use any unnecessary violence 7 NO modifications allowed 8 DO NOT connect outputs to supply voltage circuits can be damaged 9 If device is mounted to electric machinery with high current or voltage on the shaft precausions have to be taken for galvanic separation 10 Maintenance not necessary Lifetime lubricated ball bearings 11 It is strongly recommended to use the original package during transport 12 Shielded cable allowed ONLY 13 For ambient temperatures below 10 C and above 60 C use field wiring suitable for both minimum and maximum ambient temperature 14 Be aware of National Wiring Standards for ATEX environments 15 See certification on www scancon dk Doc No 00141486
Download Pdf Manuals
Related Search