Home

3G8F7-CLK_ Installation Manual

1. 1 2 Close all applications that are currently running Insert the Controller Link Support Board Support Software CD ROM in the CD ROM drive Click the Start Button select Run enter D CikSetupV2003 exe and click the OK Button If the CD ROM drive is not drive D enter the correct drive eB Controller Link Support Software Setu El x Controller Link support Board FinsGateway C Library OMRON Corporation 2000 All Rights Reserved 23 24 Installing FinsGateway Section 3 3 4 First install FinsGateway as follows Click the FinsGateway Version2003 Button in the Controller Link Support Board Software Setup Window to start the FinsGateway installation n JO MRON Corporation 2003 All Rights Reserved The following window will be displayed when the FinsGateway Version2003 Button is clicked OMRON FinsGateway Version 2003 Embed Edition ControllerLink PCI InstallShield Wizard Welcome to the InstallShield Wizard for OMRON FinsGateway Version 2003 Embed Edition ControllerLink PCI The InstallShield Wizard will install OMRON FinsGateway Version 2003 Embed Edition ControllerLink PCI on pour computer To continue click Next InstallShield B Next gt Cancel Installing FinsGateway Section 3 3 5 Follow the setup program instructions When setup has been completed restart the computer OMRON FinsGateway Yersion 2003 Embed Edition ControllerLink PCI InstallShi
2. 6 Controller Link Support Boards conform to PCI Local Bus Specifications Revision 2 0 7 User applications can also be written with Microsoft Visual Basic Version 6 0 if the optional SYSMAC Compolet Version 2 is purchased 8 User applications can also be written with Microsoft Visual Basic NET or Microsoft Visual Basic NET 2003 if the optional SYSMAC Compolet Ver sion 2003 is purchased SYSMAC Compolet Version 2003 can be used only with FinsGateway 2003 Microsoft NET framework 1 0 or 1 1 is re quired to use SYSMAC Compolet Version 2003 Refer to the operation manual for SYSMAC Compolet Version 2003 for details Application Procedure Section 1 3 1 3 Application Procedure Windows XP or Windows 2000 The EV1 models 3G8F7 CLK23 E 3G8F7 CLK13 E and 3G8F7 CLK53 E 1 Set the Board ID switch The switch settings must be made before the power supply to the computer is turned ON To enable identifying the ID number set for the Board at tach the enclosed ID label to the Board If using an Optical Ring connection also attach the indicator label to the opti cal cable bracket v 2 Mount the Board to the computer and turn ON the power supply 3 Install the software Install the drivers and C Library to enable using the Board The version of FinsGateway that needs to be installed depends on the OS and Controller Link functionality to be used featur
3. 2 4 Mounting the Board 12 Note 1 2 3 After the settings have been completed mount the Board to the PCI bus slot on the computer An example of the mounting procedure is given below 1 When mounting or dismounting the Board always turn OFF the power supply to the computer and all peripheral devices 2 When mounting the Board beware of static electricity There is a risk that the Board or the computer will be damaged 3 When mounting or dismounting the Board be careful not to damage the memory or other parts in the computer 4 Do not directly touch the back of the Board or the parts 5 The Board mounting procedure depends on the computer Perform the procedure correctly according to the user manual for the computer 1 Remove all cables communications cables and power supply cables from the Board 2 Turn OFF the power supply to the computer to which the Board is to be mounted and remove the power supply cable 3 Refer to the user manual for the computer remove the casing and mount or remove the PCI Board 4 Align the position and orientation of the PCI bus connectors on the com puter and the Board and press in the connectors as far as it will go Make sure that the Board connector is inserted into the computer connector evenly i e not at an angle When mounting the Board do not apply too much force 5 Pull the Board gently to check that it does not come out too easily 6 Secure the left side of the
4. 3 3 Installing FinsGateway To use the Support Board FinsGateway Version 2003 PCI CLK Edition or Version 3 PCI CLK Edition must be installed Note jm The version of FinsGateway that is used determines the applicable OS the development environment for user applications and the usability of the Controller Link functionality that is enabled with version 1 Refer to SEC TION 1 Outline for details Execute ClkSetupV2003 exe in the root directory on CD ROM provided with the product to install FinsGateway2003 If you are using Windows NT 4 0 Windows Me or Windows 98 however execute C kSetupV3 exe If a previous version of FinsGateway is already installed uninstall the ear lier version first and then install FinsGateway For the procedure to uninstall earlier versions of FinsGateway and unin stallation precautions refer to the FinsGateway User Manual or the Fins Gateway Version 3 Installation Application Precautions Readme e txt in the Root Folder on the Applications CD ROM FinsGateway Version 2003 PCI CLK Edition FinsGateway Version 3 PCI CLK Edition and FinsGateway Version 2 cannot both be installed on the same computer The Board Controller Link PCI drivers cannot be used with FinsGateway Version 2 or earlier The FinsGateway User Manual is supplied on the applications CD ROM in the OnlineDocument folder For detailed setup information refer to the on line manual 3 3 1 Installation Procedure 1 2 3
5. 3 6 1 Application 12 33 1 Click the Start Button and select Programs Omron Controller Link and CLKDiagPCI to start the Setup Diagnosis Utility A table of the Support Boards currently installed will be displayed in the main window ID Model Result 0 368F7 CLK21 Fest a 2 Select the Board to be diagnosed and click the Test Button to start the data exchange test between the specified Board and the computer ID Model Result 3G8F7 CLK21 Test de When the test has been completed the results will be displayed DiagPCI xj k A Data Exchange Test between PC and board is completed e Note While the test is being performed the RUN indicator and ERR indicator on the Board will flash 34 Setup Diagnostic Utility Section 3 6 Error Messages and Remedies Error details and remedy This board has a hardware prob lem Driver I F error The main window board table is not displayed Board hardware error A data checksum error has occurred between the computer and the Board Replace the Board An error has occurred in the interface with the Fins Gateway driver If the FinsGateway service CLKPCI_UNIT is operating stop the service Open the FinsGateway Service manager and check the settings For details refer to 3 3 3 Set ting Drivers FinsGateway drivers cannot detect the Board Open the FinsGateway Service manager and check the settings For details refer to 3 3 3 Set ting
6. Board using screws tightened to a torque of 0 5 Nem SECTION 3 Software Installation This section describes the procedure for installing the software necessary for using a Controller Link Support Board 3 1 Software Installation Method 533 ao AA AS E EERE ee eee 14 3 2 Installing the Controller Link PCI Drivers 005 14 3 2 1 Installation Procedute 0d 14 3 3 Installing Finns Gateway ex serbe acta hsp tute e bi ie ERO Pea etr be im dt 22 3L Installation PROCES epe AAA 23 3 3 2 Checking Completed Installation o o ooooooo 25 3 959 Seine DANS uo AES se ees eet are hae d Eu 26 3 4 Installing the C Library and Setup Diagnostic Utility 30 3 42 Tnstallation Procedures is ERRASSE ERED BA SEDL SORE 31 9 JImstallifiez is da SEES Mee area ia 33 3 5 1 Uninstallation Procedure 0 0 0c ees 33 350 Setup Diasnostic UY tapadas wes 34 S562 APPC usos er ree ee y apu i beets deeds beeen 34 13 Software Installation Method Section 3 1 3 1 Software Installation Method To use the Controller Link Support Board the following software must be installed e Controller Link PCI Driver e FinsGateway Version 2003 PCI CLK Edition e FinsGateway Version 3 PCI CLK Edition e Setup Diagnostic Utility e C Library Note 1 The version of FinsGateway that is used determines the applicable OS the development environment for user applications and the usability of the Contr
7. ClkSetup exe and click the OK Button If the CD ROM drive is not drive D enter the correct drive Y MEL Controller Link support Board For vindowsaP VWindows 2000 4 Click the C Library Button in the Controller Link Support Software Setup Window to start the C Library and the Setup Diagnostic Utility installation Controller Link support Board For VindowsxPF vvindows 2000 COOMPRON Corporation 2003 All Rights Reserved 31 Installing the C Library and Setup Diagnostic Utility Section 3 4 5 Click the C Library Button The following window will be displayed jig C Language Library InstallShield Wizard x Welcome to InstallShield wizard for C Language Library InstallShield R wizard installs Language Library in the computer of the use Click and continue Nest Waning This program is protected by the copyright law and the international treaty x Back B NextiN gt 6 Follow the setup program instructions If setup has been completed nor mally the following window will be displayed im C Language Library Installshield Wizard X InstallShield wizard was completed InstallShield wizard installed Language Library normally Click on Finish and finish wizard Back E E Cancel The C Library folder configuration is described below ControllerLink Lib C Library files and header files CLK_LIB LIB and CLK_LIB H ControllerLink Samp
8. Drivers 35 Setup Diagnostic Utility 36 Section 3 6 SECTION 4 Setup Error Messages and Troubleshooting This section describes the error messages that may occur during setup their causes and their remedies Aad JBrnors durids SLIDE aa bis Adan cis 38 4 2 BROR alter EU a Ge aes Ad 39 37 Errors during Setup Section 4 1 4 1 Errors during Setup The following table explains error messages that might be displayed during FinsGateway installation or removal The appropriate corrections are also pro vided Symptom Message Correction Nothing happens when inserting the Fins Gateway CD Use the following procedure to execute the ClkSetup exe in the root direc tory of the CD From the Windows Start menu select the Execute File option and enter the following CD ROM drive gt ClkSetup V2003 exe Alternatively execute ClkSetup V2003 exe from Explorer Setup found the following products on the sys Follow the procedure described in this manual to remove the previous version of FinsGateway For details refer to 3 5 Uninstalling When installing FinsGateway Version 3 PCI CLK or FinsGateway Version 3 PCI SLK however onto a computer with FinsGateway Version 3 Runt ime Edition already installed or when installing FinsGateway Version 3 Runtime Edition onto a computer with FinsGateway Version 3 PCI CLK or FinsGateway Version 3 PCI SLK already installed do not remove the product already installed Click th
9. OMRON S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED STORED INSTALLED AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION ABUSE MISUSE OR INAPPROPRIATE MODIFICATION OR REPAIR xi Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards codes or regulations that apply to the combination of products in the customer s application or use of the products At the customer s request OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product machine system or other application or use The following are some examples of applications for which particular attention must be given This is not intended to be an exhaustive list of all possible uses of the products nor is it intended to imply that the uses listed may be suitable for the products e Outdoor use uses involving potential chemical contamination or electrical interference or conditions or uses not described in this manual e Nuclear energy control systems combustion systems railroad systems aviation systems medical equipment amusement machines vehicles safety equipment and installations subject to separate industry or government regulations e Systems machines and equipment that could p
10. The Controller Link PCI Properties Dialog Box will be displayed Click the Driver Tab and make the driver settings Controller Link PCI Properties X About Network Driver Product name Fins ateway Controller Link PCI Embedded Edition Version 003 0 Wendor OMRON Note Licensed TRUE Install Date 0053 06 08 06 44 Time Limit NONE Cancel Ay 5 Click the Network Tab and make the settings by entering the Board node address in the Local node number Field and the communications Unit ad dress in the Communications unit number Field Controller Link PCI Properties About Network Driver Network number Local node number 1 Max Node Number set bz Communication unit number Ei 28 Installing FinsGateway Section 3 3 Note When configuring a network containing between 33 and 62 nodes the following Units and Board must be used at all nodes If these Units Board are not used the network will not work with more than 32 nodes If networks with 32 or fewer nodes are being used clear the selection for Max Node Number set 62 e CS1W CLK23 e CS1W CLK21 EV1 e CJ1W CLK23 e CJ1W CLK21 EV1 e 3G8F7 CLK23 E e 3G8F7 CLK21 EV1 6 Click the Driver Tab and set the baud rate for the Board When all the set tings have been made click the OK Button Controller Link PCI Properties X About Network Driver BoardlD Baud Hate available on the WIRE board 24
11. bps ProtocolMode available on the HEER or lal Board f Token Fina Token Bus jw Run Controller Link support board as the polling node Cancel Apply The baud rate setting is enabled only for the Wired models The Protocol Mode setting is enabled only for the Optical Fiber models 29 Installing the C Library and Setup Diagnostic Utility Section 3 4 7 Click the Basic Tab and the Services Icon in the main FinsGateway Set tings Window to add CLKPCI_UNITO to the service settings Next click the CLKPCI_UNITO Icon in the right Service Settings Section and click the Start Button m OMRON FinsGateway Settings E B x File Network EventMemoy View Tool Help Tool Bar E Bm 1 Basic DacaMema Into Service Settings p Networks pup Networks and Units Ko e CLKPCI UNITO BOE Drivers CPU UNIT FowSocke T Mi emories E A EventMemories Startup Manual Egi Event Conditions e Es Path D Program Files OMR FINS Data Areas zw ed Services Map amp gent NameSpa 2 Status Stopped i a Equis acketProgy a rel E Ps MapAgent e e stat spsmacLink CLE_UNITO j WS SusmacLink Unit i 83 CLK UNITO 288 CLEPCLUNITO Start SCM at log in E Es Memories a Eventhd emornes H S Event Conditions i e gw FINS Data Areas CLEPCI Li Ed S Services oe CPU LIMIT i FowsocketProxy 2 Mapgent NameSpaceServer p oysmacLink Unit E CLK LMITU m CLEPCIUNITO Note 1 When the CLKPC
12. for SYSMAC Com polet Version 2003 for details 3 To use the new version 1 Controller Link functionality the OS must be Win dows XP Professional Windows XP Home Edition or Windows 2000 Pro fessional and FinsGateway must be Version 2003 The new functionality is not supported on other OS Windows NT 4 0 Windows Me and Windows 98 or by FinsGateway Version 3 4 To use a maximum of 4 000 data link send words per node which is pos sible with 3G8F7 CLK23 E 3G8F7 CLK13 E and 3G8F7 CLK53 E Units the operating system must be either Windows XP or Windows 2000 and the FinsGateway must be version 2003 FinsGateway Version 2003 21 or higher This function cannot be used with Windows NT 4 0 Windows Me or Windows 98 or with FinsGateway Version 3 Application Procedure Section 1 3 SECTION 2 Settings and Installation This section describes how to make settings for the Controller Link Support Boards and how to mount a Support Board to a computer This section also describes the function of the parts of the Controller Link Support Boards 2 1 Parts Names and Functions 0 0 cc cece eee s 2 1 1 Wired Model 3G8F7 CLK23 E and 3G8F7 CLK21 EV1 2 1 2 Optical Ring Model for H PCF Cable 3G8F7 CLK13 E and GSE CEK IPSEN Era de iris Blade tae debe bowed 9 2 1 3 Optical Ring Model for GI Cable 3G8F7 CLK53 E and SOISBZSCERS2 BV ti rd tdo do de 10 2 2 XOhecke Detore US ie e A Sc BILE cedi ru Eds 11 2 3 SWC SEUINGS las
13. indicator label x 1 Cable User registration card software user agreement x 1 Note 1 The CD ROM contains the following software e Controller Link PCI Driver e FinsGateway Version 2003 PCI CLK Edition e FinsGateway Version 3 PCI CLK Edition e Setup Diagnostic Utility e C Library 2 This product does not include the personal computer OS One must be provided separately 1 2 Operating Environment The following table lists the operating environment for Controller Link Support Boards for PCI Bus connections Compatible computers Compatible OS Compatible language version IBM PC AT or compatible FinsGateway e Windows XP Professional Microsoft Visual C Ver 6 0 e CPU Intel Celeron 400 MHz or better Version 2003 e Windows XP Home Edition Service Pack 3 e Main memory 128 MB minimum e Windows 2000 Professional Microsoft Visual C NET e 1 or more PCI bus slots PCI bus revi 2003 l sion 2 0 or later power supply 5 V When using the C language library provided in the CD e Free hard disk space 70 MB min not including user applications ROM with the product e CD ROM drive One required for software installation Display VGA 640 x 480 pixels min Other conditions conform to the OS Note 1 There are two versions for FinsGateway Version 2003 and Version 3 pro vided on the CD ROM that comes with the product The applicable OS de pends on the version of FinsGateway 2 When usin
14. it appears in the proper name of the product The abbreviation Ch which appears in some displays and on some OMRON products often means word and is abbreviated Wd in documentation in this sense The abbreviation PC means Programmable Controller and is not used as an abbreviation for anything else Visual Aids The following headings appear in the left column of the manual to help you locate different types of information Note Indicates information of particular interest for efficient and convenient op eration of the product 1 2 3 1 Indicates lists of one sort or another such as procedures checklists etc OMRON 2007 All rights reserved No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means mechanical electronic photocopying recording or otherwise without the prior written permission of OMRON No patent liability is assumed with respect to the use of the information contained herein Moreover because OMRON is con stantly striving to improve its high quality products the information contained in this manual is subject to change without notice Every precaution has been taken in the preparation of this manual Nevertheless OMRON assumes no responsibility for errors or omissions Neither is any liability assumed for damages resulting from the use of the information contained in this publication Intel and Celeron are registered tradem
15. pon want to perform Select the hardware task pon want ta perform and then click Met XE d this option if you are adding a new device to pour computer or are having iproblems getting a device working C LIninstall LInplug a device Choose this option to uninstall a device or ta prepare the computer ta unplug a device lt Back Cancel Installing the Controller Link PCI Drivers Section 3 2 3 Select the Add a new device option and click the Next Button Add Remove Hardware Wizard Choose a Hardware Device Which hardware device do you want to troubleshoot The following hardware 12 already installed on your computer IF you are having problems with one of these devices select the device and then click Next IF vau are attempting to add a device and itis not shown below select Add a new device and then click Hest Devices Add 4 new device mj Monitor E Floppy disk drive NEC CD ROM DRIVE 28B EI FUJITSU M1623TAU i Crystal WOM Audio Codec He Disabled Device hd Back Cancel 4 Select the No I want to select the hardware from a list option and click the Next Button Add Remove Hardware Wizard Find New Hardware Windows can also detect hardware that i not Plug and Play compatible When Windows detects new hardware it checks the current settings For the device and installs the correct driver Do vou want Windows to search for pour new hardware C Yes search for
16. 9 9 9 9 9 9 9 9 Card Edge Connector Refer to 2 4 Mounting the Board Connect to the PCI Bus slot of the computer Board ID Setting Switch Refer to 2 3 1 Board ID Setting If mounting multiple Controller Link Support Boards to the computer set the ID number 0 to 3 to identify the Board _ Backup Power Supply Connector a Refer to the Operation Manual W383 p Use the enclosed cable connector to connect Pes to the backup power supply L L LER E tal wy 3G8F7 CLK52 Cable Bracket Screw Holes Use to install the Optical Fiber Cable Bracket Indicators Communications Connector Refer to the Operation Manual Refer to the Operation Manual W383 W383 Connect the communications cable GI cable Display the status of the Board and of the Controller Link Network Network i i 126 i Dimensions 107 af O Or Lo LO Y x 5 Unit mm Note The dimensions given in parentheses are for when the previous connector is mounted 10 Checks before Use 2 2 Checks before Use Check the following before mounting the Board to the computer Section 2 2 Note The PCI Bus Controller Link Support Board supports Windows Plug amp Play Note 1 2 3 Check item Check details Unused PCI Bus slots Check that there is an unused PCI Bus slot on the com puter to be used IRQ Interrupt Required The Board uses an IRQ The IRQ is allocated a
17. Cat No W467 E1 01 Controller Link Support Boards for PCI Bus INSTALLATION GUIDE SYSMAC 3G8F7 CLK13 E Optical Ring H PCF Cable 3G8F7 CLK12 EV1 Optical Ring H PCF Cable 3G8F7 CLK53 E Optical Ring Gl Cable 3G8F7 CLK52 EV1 Optical Ring Gl Cable 3G8F7 CLK23 E Twisted pair Cable 3G8F7 CLK21 EV1 Twisted pair Cable Controller Link Support Boards for PCI Bus Installation Guide Produced June 2007 Notice OMRON products are manufactured for use according to proper procedures by a qualified operator and only for the purposes described in this manual The following conventions are used to indicate and classify precautions in this manual Always heed the information provided with them Failure to heed precautions can result in injury to people or dam age to property N DANGER Indicates an imminently hazardous situation which if not avoided will result in death or serious injury Additionally there may be severe property damage N WARNING Indicates a potentially hazardous situation which if not avoided could result in death or serious injury Additionally there may be severe property damage N Caution Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury or property damage OMRON Product References All OMRON products are capitalized in this manual The word Unit is also capitalized when it refers to an OMRON product regardless of whether or not
18. FinsGateway d HH FinsGateway Configuration Documents 3 Administrative Tools 5 FinsGateway Help A Service Manager Settings d Search Help 2 Click the Basic Tab in the FinsGateway Settings Window and click the Drivers Icon Next click the CLK PCI Icon in the Driver Settings Section and click the Properties Button m OMRON FinsGateway Settings nm x File Network EverntMemoy View Tool Help Too Ba 4 pi E LL Basic DocoMemo Info Driver Settings Networks ion Networks and Units ES ES 3 sce Susmaclink Controller CLK PCI Properties E A Memories Link NF A E ventMemories j EA mM Event L onditions a e FINS Data Areas Bd Services 8465 CPU UNIT 19 FowS ocketProxy i Ws Map gent ie MameSpaceSsrver ae SusmacLink Unit M CLK_UNITO i ws CLLEPCIUNITO Set up FinsGatewawv 3 The mounted Boards will be displayed in the Controller Link PCI Lists Di alog Box Select the Board to be changed and click the Change Button Controller Link PCI Lists X Selling Board Status Delete Change Refresh Only Controller Link PCI board Refresh installed board 27 Installing FinsGateway Section 3 3 If the Board is not displayed in the dialog box click the Refresh Button The example window shows the Board ID has been set to 0 If multiple Boards are mounted all the mounted boards will be displayed in the dialog box Select the ID for the Board to be set 4
19. I_UNIT Service is started the Board will start to partici pate in the network 2 The Board ID numbers correspond to the service names given in the fol lowing table Board ID o GLKPGI_UNITO CLKPOLUNITA 3 EEG CLKPCI_UNIT3 3 4 Installing the C Library and Setup Diagnostic Utility The C Library is a library of special functions Microsoft Visual C Ver 6 0 Microsoft Visual C NET 2003 used to control the Board from the user applications Install the C Library if creating user applications for the Board The Setup Diagnosis Utility checks if the Board and software have been installed correctly and that data exchange can be performed correctly between the Board and the computer drivers Note 1 Touse the C Library FinsGateway Version 2003 PCI CLK Edition or FinsGateway Version 3 PCI CLK Edition must be installed 30 Installing the C Library and Setup Diagnostic Utility Section 3 4 2 For details of the C Library functions refer to the Controller Link Support Boards for PCI Bus Operation Manual W383 3 Fordetails on the Setup Diagnosis Utility refer to 3 6 Setup Diagnostic Util ity 3 4 1 Installation Procedure The installation procedure for the C Library and the Setup Diagnosis Utility is described below 1 2 3 1 Close all applications currently open 2 Insertthe Controller Link Support Board Support Software CD ROM in the CD ROM drive 3 Click the Start Button select Run enter D
20. It may represent the result of OMRON s test conditions and the users must correlate it to actual application requirements Actual performance is subject to the OMRON Warranty and Limitations of Liability ERRORS AND OMISSIONS The information in this manual has been carefully checked and is believed to be accurate however no responsibility is assumed for clerical typographical or proofreading errors or omissions xiii XIV PRECAUTIONS This section provides general precautions for using the Controller Link Support Board for PCI Bus and related devices The information contained in this section is important for the safe and reliable application of the Controller Link Support Board for PCI Bus You must read this section and understand the information contained before attempting to set up or operate a Controller Link Support Board for PCI Bus 1 Intended Andic Mee 2 oacoma ica ees EDER sia XVI 2 General PrecauliOns orcos acia he tok haw sedeo XVI 3 Safety PrecdutiOBSs s arista iaa XVI 4 Operating Environment Precautions 0 0 0 0 0c eee eee eee xvii 5 Application PrecaunlOns aoc x aoe tate dese bebe oe eee DEN AGNES xviii XV Intended Audience 1 2 3 XVI Intended Audience This manual is intended for the following personnel who must also have knowledge of electrical systems an electrical engineer or the equivalent Personnel in charge of installing FA systems e Personnel in charge of designin
21. L Help runtime component can be installed after installing Fins is not installed or an older version is installed Gateway If the online Help does not display properly install the HTML Help runtime component Setup will continue No products are selected to install Exit To continue Setup click the No Button and select at least one product to Setup install To exit Setup click the Yes Button Setup found FinsGateway Version 1 Previous FinsGateway Version 1 or another previous version cannot be installed versions of FinsGateway cannot be on the and run on the same system same system Remove Version 1 first then install the new FinsGateway version Before installing FinsGateway Versions remove FinsGateway Version 1 Clicking Yes will delete the appropriate version 1 files and continue the FinsGateway Versions installation Clicking No will exit Setup Insufficient hard disk space available to install Install to a different drive or open some of the space on the same drive Then start Setup again Cannot continue Setup Exiting now This message is displayed when the confirmation dialog for stopping Fin sGateway services is rejected Setup cannot run with services running Errors after Setup Section 4 2 Symptom Message Correction After switching applications and closing the The FinsGateway Service Manager is running To continue Setup close FinsGateway Service Manager click Yes To the Servic
22. Programs 77 OMRON FinsGateway SDK Size 55 7 MB yz OMRON FinsGateway Controller Link PCI Embedded Edition Size 56 2MB Last Used On 11 5 2000 sae 4 Add New To ch a nge this pr og ra m or r em o ve ik From your Change Remove Programs computer click Change Remove C OMRON FinsGateway Controller Link Runtime Edition Size 53 6MB d AE a OMRON FinsGateway SysmacLink Runtime Edition Size 53 6MB Add Remove Windows Components After uninstalling FinsGateway Version 2003 PCI CLK Edition or Fins Gateway Version 3 PCI CLK Edition restart the system If FinsGateway is installed and operated without restarting the system FinsGateway will no longer operate normally When the C library is uninstalled the Setup Diagnosis Utility will also be deleted 33 Setup Diagnostic Utility Section 3 6 3 6 Setup Diagnostic Utility The Setup Diagnosis Utility checks if the Board and software have been installed correctly and that data exchange can be performed correctly between the Board and the computer drivers Note 1 The Setup Diagnosis Utility operates in a special mode to perform diagno sis of the Controller Link Support Board so while diagnosis is being per formed normal communications cannot be performed Do not start the Setup Diagnosis Utility while the system is operating 2 The Setup Diagnosis Utility can be used once FinsGateway has been set up and the Board driver settings have been made correctly
23. The maximum number of Boards that can be mounted is a total of four for all three models The Board ID number is set to O at the factory Do not set the Board ID number between 4 and 9 When the Board is mounted to the computer it is difficult to check the Board ID from the outside Write the Board ID setting on the enclosed ID 11 Mounting the Board Section 2 4 No label and attach the label inthe designated position on the Board Re fer to the following diagram Attach the label within the dotted lines 2 3 2 Terminating Resistance Settings Wired Models Only Note Set whether or not to connect the built in terminating resistance using the Ter minating Resistance Switch slide switch Terminating resistance is required to terminate wired networks to absorb excess signals and reduce noise The Board has built in terminating resistance so terminating resistance can be connected simply by setting the switch When using a wired network turn the terminating resistance switch ON at the nodes on both ends of the network and OFF at all other nodes ON 4 TER Setting Terminating resistance OFF See note 2 No terminating resistance Terminating resistance 1 This setting can be made after mounting the Board to the computer but al ways turn OFF the power to the computer before changing the setting 2 Theterminating resistance is set to OFF i e no terminating resistance at the factory
24. Wizard P Completing the Found New Hardware Wizard gt Controller Link PCI Windows has finished installing the software for this device To close this wizard click Finish 17 18 Installing the Controller Link PCI Drivers Section 3 2 Registering a New Device from the Control Panel Note lt is necessary to log on as a user with administrator privileges to perform the installation 1 2 3 1 Select Settings and Control Panel from the Windows Start Menu and then click the Add Remove Hardware Icon Control Panel 3 Bl x File Edit View Favorites Tools Help 4m Back ta Search Folders E S hHistory pro gU X Uu 3 Address Control Panel Go TS z la ie Display Control Panel Options ardware T Add Remove Hardware Apis Installs removes and t H H lE troubleshoots hardware Find Fast Folder Options Fonts Game Internet Keyboard Controllers Options Pro gt E y um Windows Update A E Ul lt lt Technical Support twf ER gt 3m E d v Mouse Network and Phone and Power Options Printers Regional Dial up Co Modem Options z w 7 lol 4 En Scheduled Sounds and System Users and Tasks Multimedia Passwords Installs removes and troubleshoots hardware 40 Internet zone 2 Select the Add Troubleshoot a device option and click the Next Button Add Remove Hardware Wizard Choose a Hardware T ask Which hardware task do
25. anufacturer s files from D SWDMSELK PCI 9 Select the Controller Link PCI option from the Models List and click the Next Button Add Remove Hardware Wizard Select a Device Driver Which driver do you want to install for this device i Select the manufacturer and model of your hardware device and then click Next IF you have a disk that contains the driver pon want to install click Have Disk Models Controller Link PCI Back Hest gt Cancel 21 Installing the Controller Link PCI Drivers Section 3 2 10 Click the Next Button Add Remove Hardware Wizard Start Hardware Installation Windows Is ready to install drivers for your new hardware 1 Controller Link PCI Windows will use default settings to install the software for this hardware device To Install the software for your new hardware click Next Cancel Installation has been completed 4dd Remove Hardware Wizard Completing the Add Remove Hardware Wizard You have successfully completed the Add Remove Hardware wizard The following hardware was installed Controller Link PCT Windows has finished installing the software for this device For the hardware to work you will have to restart the computer To view or change the resources for this Resources device click Resources To close this wizard click Finish Farce C in 22 Installing FinsGateway Section 3 3
26. ard for PCI Bus to the above mentioned appli cations Safety Precautions N WARNING N WARNING N WARNING Never attempt to disassemble any Controller Link Support Board for PCI Bus while power is being supplied Doing so may result in serious electrical shock or electrocution Never touch any of the terminals while power is being supplied Doing so may result in serious electrical shock or electrocution Provide safety measures in external circuits i e not in the Programmable Controller CPU Unit including associated Units referred to as PC in order to ensure safety in the system if an abnormality occurs due to malfunction of the PC or another external factor affecting the PC operation Not doing so may result in serious accidents e Emergency stop circuits interlock circuits limit circuits and similar safety measures must be provided in external control circuits e The PC will turn OFF all outputs when its self diagnosis function detects any error or when a severe failure alarm FALS instruction is executed As a countermeasure for such errors external safety measures must be provided to ensure safety in the system Operating Environment Precautions 4 N Caution N Caution N Caution N Caution N Caution N Caution e The PC outputs may remain ON or OFF due to deposition or burning of the output relays or destruction of the output transistors As a counter measure for such problems external saf
27. arks of Intel Corporation Microsoft Windows Windows NT Visual C Visual CT NET Visual Basic Visual Basic NET and Visual Studio are reg istered trademarks of Microsoft Corporation IBM and PC AT are trademarks of International Business Machines Corporation All other product names or company names that appear in this manual are trademarks or registered trademarks of each respec tive company TABLE OF CONTENTS PRECAUFIONS suctus biceps Fee AV 1 Intended Audieli6e 65 54 oet ud bx dee ae tee REA nk ee ox ee SN qu d iwi v ee xvi 2 General PrecauuOns serar a a A eee Be sea eut xvi 3 ca UON S aia ee PAP E E a E a shaw a aia a a fer aai xvi 4 Operating Environment Precautions a up ex pede area needa a ae LEE A xvii D Application PrecautiODs s o oed AD bead e HERE E de dun oho ov o tes ab A ts xviii SECTION 1 OUUING 4280006 de Da doe ie udi espada aub 1 sl Broduct CORE FAO ss vs daa DE dero id Re ee eke 2 122 Operating Environment moradas deter REESE eee dea ee 2 1 3 Application Procedure vs ovis oc taeda Se ne arbo v Re eX Re bh Oho A d doped 4 SECTION 2 Settings and Installation cece eens 7 2 Parts Names and Functions ide rasca A AA edad ure dus ds 8 2 2 HEKS DelObe US tE Maree ENE Cubic D dede ar eb WS x oe deas 1 2 3 SWICK SEUS ia eoque eoe eb dius SE DORUM d dcr a 11 224 2NTOURIEL BE Me Boardi S cut eat pte UTR One e oed e quat elt od edic cui ef bai us 12 SECTION 3 Software Insta
28. clara sn REDER Acad 11 2e MEE LIBI iT see Dk ren Oh hee PAA awe e 11 2 3 2 Terminating Resistance Settings Wired Models Only 12 2e Months The Boa daros Say esce Eee hes Paes 12 Parts Names and Functions Section 2 1 2 1 Parts Names and Functions The following section shows the external appearance of the Controller Link Support Boards for PCI Bus connections hereinafter called Boards and provides the names of parts functions and dimensions of the Board 2 1 1 Wired Model 3G8F7 CLK23 E and 3G8F7 CLK21 EV1 o Card Edge Connector Refer to 2 4 Mounting the Board Connect to the PCI Bus slot of the computer Board ID Switch Refer to 2 3 1 Board ID Setting If mounting multiple Controller Link Support Boards to the computer set the ID number 0 to 3 to identify the Board _ Communications Connector a Refer to the Operation Manual W383 Connect the communications cable of the Controller Link Network using the connector attached to the Board Terminating Resistance Switch Indicators Refer to 2 3 2 Terminating Resistance Settings Wired Refer to the Operation Manual W383 Models Only _ m i Display the status of the Board and Network This is a slide switch Turn ON the terminating resistance at the nodes on both ends of the Controller Link Network The switch must be set to OFF at all other nodes 126 Dimensions 107 156 140 Unit mm Parts Names a
29. e Manager from the icon in the task tray exit Setup click No To exit Setup click No Could not create temporary files Could not The environment variable setting failed modify the environment variable PATH Add the following to the Autoexec bat file in the root directory of the boot disk SET FinsServer lt full path to the FinsGateway installation folder gt The following is an example of the default installation to the C drive SET FinsServer C Program Files OMRON FinsServer95 Note The FinsGateway Users Manual is stored in the online document folder in the application CD ROM 4 2 Errors after Setup The following table explains the error message that might be displayed after FinsGateway installation The appropriate corrections are also provided SymptomiMessage Selecting FinsGateway Help from the To open the FinsGateway Help an appropriate version of Internet Explorer and Start menu does not start the Help the HTML Help runtime component are required For details refer to Section 3 Setup Procedure This control requires COMCTL32 DLL The system COMCTL32 DLL needs to be updated Follow the procedure version 4 70 or higher described in Section 3 Setup Procedure Clicking on the Help hyperlink does not To open a PDF file Acrobat Reader 4 is required For details refer to Section 3 display the target file Setup Procedure in this manual Event log ID 97 is registered This ID is logged when data link tables have not b
30. e Next Button and continue installation Setup fails during installation program startup The product installer startup failed Be sure the Setup exe is being executed from the CD lt xxx gt file delete failure A file deletion failed The file may be used by another application pro Check whether the file is read only or being 9ram used by another application Then run Setup Close all the applications that use FinsGateway and try again again The FinsGateway online Help requires Inter To open the FinsGateway Help an appropriate version of Internet net Explorer Version3 02 or higher Explorer is required Currently Internet Explorer is not installed or For details refer to Setup Procedure in this manual For details refer to an older version is installed Setup Procedure in this manual If the online Help does not display properly Internet Explorer can be set up after installing FinsGateway install Internet Explorer Version3 02 or higher Setup will continue tem Remove the old product versions then install FinsGateway Versions Refer to the manual for details about removing the previous product versions The FinsGateway online Help requires the To open the FinsGateway Help an appropriate version of the HTML Help HTML Help runtime component version 1 31 runtime component is required For details refer to Setup Procedure in or higher this manual Currently the HTML Help runtime component The HTM
31. een set Registration can be Event log ID 97 This ID indicates that an prevented by setting data link tables event memory type not supported by If data links are not being used then there will be no problems in operation FinsGateway for sending data link data and this ID can be ignored has been set Data will not be sent between the Support Board and event memory This ID is logged when there are not data link tables Note The FinsGateway Users Manual is stored in the online document folder in the application CD ROM 39 Errors after Setup Section 4 2 40 Revision History A manual revision code appears as a suffix to the catalog number on the front cover of the manual Cat No W467 E1 01 Revision code The following table outlines the changes made to the manual during each revision Page numbers refer to the previous version Revision code Date Revised content 01 June 2007 Original production The entire manual is a revision of W422 to which the 3G8F7 CLK13 E 3G8F7 CLK23 E and 3G8F7 CLK53 E were added 41 42 Revision History
32. eld Wizard InstallShield Wizard Complete The InstallShield Wizard has successfully installed OMRON FinsGateway Version 2003 Embed Edition ControllerLink PCI Before you can use the program you must restart your computer Qi Yes want to restart my computer now No will restart my computer later InstallShield Cancel 3 3 2 Checking Completed Installation Check that FinsGateway has been installed correctly and that FinsGateway has been added to the Windows Start Menu Programs Fa FinsGateway k HH FinsGateway Configuration Documents 3 Administrative Tools 5 FinsGateway Help Tl Service Manager Settings Search 2000 Professional Help 25 Installing FinsGateway 3 3 3 Setting Drivers Next make the Controller Link Support Board driver settings The setting details are given in the following table Note 26 Setting item Local node address Node address Communications Unit address Unit address Protocol mode Communications format Baud rate Polling node and polled node set tings Section 3 3 Details Set the Board node address in decimal The pos sible setting range is given below 1 to 62 Optical Fiber models 1 to 32 Wired models See note 1 Make sure there are no duplicate node settings on the same Controller Link network Set the Board Unit address in decimal The pos sible setting range is given below 16 to 31 Make sure
33. es can be used See note 4 Install FinsGateway Version 2003 The setup program is ClkSetupV2003 exe See note 4 Install i FinsGateway The setup program is Version 3 ClkSetupV3 exe Windows NT 4 0 Windows Me or Windows 98 Version 1 Controller Link features cannot be used To create a user application 6 Use the API and create the user application y 5 Connect the communica tions cable to If using a wired connection set the terminating resistance setting switches If using an Optical Ring connection attach the optical cable the Board bracket To use PLC Reporter 32 AIMAX FA or other pack age software The development environment Package software is not included with depends on the FinsGateway the Board and must be ordered version Refer to the following separately Refer to the relevant table for details manual for package software use Note The new version 1 Controller Link functionality is as follows Automatic 1 N data link allocations support for 62 wired nodes and data link table changes with active data links Maximum number of data link send words per node 4 000 Application Procedure Section 1 3 FinsGateway Compatible OS Restrictions for API applications Development version Controller Link programming environment functionality interface FinsGateway Windows XP Professional The fo
34. ety measures must be provided to ensure safety in the system e When the 24 VDC output Service power supply to the PC is overloaded or short circuited the voltage may drop and result in the outputs being turned OFF As a countermeasure for such problems external safety measures must be provided to ensure safety in the system Execute online edit only after confirming that no adverse effects will be caused by extending the cycle time Otherwise the input signals may not be readable Confirm safety at the destination node before transferring a program to another node or changing contents of the I O memory area Doing either of these without confirming safety may result in injury Tighten the connector screws for the backup power supply to the torque spec ified in this manual The loose screws may result in burning or malfunction Operating Environment Precautions Do not operate the control system in the following locations e Locations subject to direct sunlight e Locations subject to temperatures or humidity outside the range specified in the specifications e Locations subject to condensation as the result of severe changes in tem perature e Locations subject to corrosive or flammable gases e Locations subject to dust especially iron dust or salts e Locations subject to exposure to water oil or chemicals e Locations subject to shock or vibration Take appropriate and sufficient countermeasures when installing sy
35. g FA systems e Personnel in charge of managing FA systems and facilities General Precautions N WARNING The user must operate the product according to the performance specifica tions described in the operation manuals Before using the product under conditions which are not described in the manual or applying the product to nuclear control systems railroad systems aviation systems vehicles combustion systems medical equipment amuse ment machines safety equipment and other systems machines and equip ment that may have a serious influence on lives and property if used improperly consult your OMRON representative Make sure that the ratings and performance characteristics of the product are sufficient for the systems machines and equipment and be sure to provide the systems machines and equipment with double safety mechanisms This manual provides information for programming and operating the Control ler Link Support Board for PCI Bus and related devices Be sure to read this manual before attempting to use the software and keep this manual close at hand for reference during operation It is extremely important that a Controller Link Support Board for PCI Bus and all related devices be used for the specified purpose and under the specified conditions especially in applications that can directly or indirectly affect human life You must consult with your OMRON representative before apply ing a Controller Link Support Bo
36. g Windows NT 4 0 service pack 3 or later Windows Me or Windows 98SE install FinsGateway Version 3 Using version 3 of the FinsGateway however with disable the following functions supported by Controller Link Support Boards for PCI Bus Automatic 1 N data link Operating Environment Section 1 2 allocations changing data link tables while data links are active and using 62 wired nodes Maximum number of data link send words per node 4 000 3 Use FinsGateway Version 2003 21 or higher to use up to 4 000 data link send words per node The version of FinsGateway that is installed can be confirmed by starting the FinsGateway Settings program and checking the product information provided on the Info Tab Page FinsGateway version Automatic allocation Setting 62 wired Changing data link Maximum number of of 1 N data link nodes tables with active data link send words tables data links per node 4 000 FinsGateway Version Supported Supported Supported Supported 2003 FinsGateway Version 2003 21 or higher FinsGateway Version 3 Not supported Not supported Not supported Not supported 4 A Controller Link Support Board cannot be used with Windows 95 or Win dows NT 3 51 or earlier 5 Controller Link Support Boards for PCI Bus connection may not operate correctly when used with other computers or operating systems Always use the Controller Link Support Board with a personal computer and OS that satisfy the above conditions
37. lation setup and operating procedures for the W370 CVM1 CLK12 CS1W CLKS53 Optical Ring Controller Link Units Controller Link CS1W CLK52 V1 CVM1 CLK52 Units are used to connect C200HX HG HE CV series Optical Ring Controller Link Units and CS1 series PCs to a Controller Link Network Operation Manual Depending on the system you may also need the SYSMAC or CV Support Software or a Program ming Console Refer to the body of this manual for details Please read this manual and related manu als carefully and be sure you understand the information provided before attempting to install and operate a Controller Link Support Board Section 1 describes the configuration of the Controller Link network system and the product configu ration and operating environment of the Controller Link Support Boards Section 2 describes how to make settings for the Controller Link Support Boards and how to mount a Support Board to a personal computer This section also describes the function of the parts of the Con troller Link Support Boards Section 3 describes the procedure for installing the software necessary for using a Controller Link Support Board ix Section 4 describes the error messages that may occur during setup their causes and their reme dies N WARNING Failure to read and understand the information provided in this manual may result in per sonal injury or death damage to the product or product failure Please read each sectio
38. le Sample programs used by the C Library Visual C MFC application project files ControllerLink Help Help files using the C Library HTML files Note The C Library DLL CLK LIB DLL file is copied to the Windows system direc tory 32 Uninstalling 3 5 Uninstalling Section 3 5 If the Board software FinsGateway C Library and the Setup Diagnostic Util ity are no longer required because the Board has been removed from the computer the relevant program files can be deleted using the following proce dure Only installed files will be deleted Files created later will not be deleted 3 5 1 Uninstallation Procedure This section describes uninstalling FinsGateway as an example of uninstalla tion If using Windows 98 or Windows NT4 0 the windows item names and operations displayed may differ slightly so be careful 1 2 3 Note 1 2 1 Close all programs and services using FinsGateway Right click the Service Manager Icon in the Task Tray and select Stop all services from the popup menu Double click the Add Remove Programs Icon in the Control Panel Win dow Select the programs to be uninstalled from the table displayed Click the Change Remove Button to start the uninstallation Follow the program instructions to uninstall the software 5 Add Remove Programs loj x E Name bu Currently installed programs Sort by Mame Change or i C Language Library Size 1 14MB E Remove
39. llatioN ooooooooooooooooo 13 3 1 Software Installation Method 0 0 0 ccc eee eens 14 3 2 Installing the Controller Link PCI Drivers 0 0 0 0 0 14 Bad installing RinsGialte way 5s nce eg OE hoe aw hea oboe RE ee RA ERA det Raed alee 23 3 4 Installing the C Library and Setup Diagnostic UtilItY o ooo ooooooooooooo 30 A 33 320 Setup Draenostic U trlity restar as p Ro gre Suess Peed Sey eee 34 SECTION 4 Setup Error Messages and Troubleshooting 37 ALY EROS QUESO Sellada dali is tU bake eee ee qs 38 4 2 Brors aller SCS A ER dE da 39 Revision History 5a ex eX EAR Al vii TABLE OF CONTENTS vili About this Manual This manual describes the installation setup and operation of the 3G8F7 CLK13 E 3G8F7 CLK12 EV1 3G8F7 CLK53 E 3G8F7 CLK52 EV1 3G8F7 CLK23 E and 3G8F7 CLK21 EV1 Controller Link Support Boards for PCI Bus and includes the sections described below Controller Link Support Boards are used to connect IBM PC AT or compatible computers to a Controller Link Network The fol lowing three manuals are directly related to application of the Controller Link Network Contents Cat No suffixes omitted 3G8F7 CLK13 E 3G8F7 CLK12 Installation and setup procedures for Controller Link W467 EV1 3G8F7 CLK53 E 3G8F7 Support Boards for PCI bus connections Controller eee oe Link Support Boards are used to connect IBM PC ATs Controller Link Support Boards f
40. llowing functions SYSMAC Compo Microsoft Visual Basic Version 2003 e Windows XP Home Edition can be used let NET NET 2003 or e Windows 2000 Professional e Automatic 1 N data link Microsoft Visual Basic allocations NET e 62 wired nodes SYSMAC Compo Microsoft Visual Basic e Data link table changes let Version 2 Ver 6 0 with active data links The C language Microsoft Visual C e Maximum number of library provided Ver 6 0 with the product Service Pack 3 data link send words per node 4 000 Microsoft Visual C NET 2003 FinsGateway Windows XP Professional The following functions SYSMAC Compo Microsoft Visual Basic Version 3 e Windows XP Home Edition cannot be used let Version 2 Ver 6 0 e Windows 2000 Professional Automatic 1 N data link The C language Microsoft Visual C e Windows NT 4 0 allocations library provided Ver 6 0 Service Pack 3 or later 62 wired nodes with the product Service Pack 3 e Windows Me e Data link table changes e Window 98SE with active data links e Maximum number of data link send words per node 4 000 Note 1 SYSMAC Compolet NET and SYSMAC Compolet Version 2 are not in cluded with the product and must be ordered separately Refer to the op eration manual for details 2 SYSMAC Compolet Version 2003 can be used only with FinsGateway 2003 Microsoft NET framework 1 0 or 1 1 is required to use SYSMAC Compolet Version 2003 Refer to the operation manual
41. manual Incorrect tightening torque may result in malfunction e Use crimp terminals for wiring Do not connect bare stranded wires directly to terminals Connection of bare stranded wires may result in burning e Double check all the wiring before turning ON the power supply Incorrect wiring may result in burning Wire correctly e Double check all the connectors before mounting the Board e Be sure that the communications cable connectors and other items with locking devices are properly locked into place Improper locking may result in malfunction xviii Application Precautions 9 e Use a special packing box when transporting the Board Handle the prod uct carefully so that no excessive vibration or impact is applied to the product during transportation e Check the user program for proper execution before actually running it on the Unit Not checking the program may result in an unexpected opera tion Observe the following precautions when wiring the communications cable or backup power supply cables e Separate the cables from power lines or high tension lines e Do not bend the cables e Do not pull on the cables e Do not place heavy objects on top of the cables e Route cables inside conduits e Before touching the Unit be sure to first touch a grounded metallic object in order to discharge any static built up Not doing so may result in mal function or damage e Do not touch the Board surfaces or part
42. n in its entirety and be sure you understand the information provided in the section and related sections before attempting any of the procedures or operations given Read and Understand this Manual Please read and understand this manual before using the product Please consult your OMRON representative if you have any questions or comments Warranty and Limitations of Liability WARRANTY OMRON s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year or other period if specified from date of sale by OMRON OMRON MAKES NO WARRANTY OR REPRESENTATION EXPRESS OR IMPLIED REGARDING NON INFRINGEMENT MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE OMRON DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS WHETHER SUCH CLAIM IS BASED ON CONTRACT WARRANTY NEGLIGENCE OR STRICT LIABILITY In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted INNO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY REPAIR OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
43. nd Functions Section 2 1 2 1 2 Optical Ring Model for H PCF Cable 3G8F7 CLK13 E and 3G8F7 CLK12 EV1 amp 9 9 9 9 oe 9 9 9 9 9 wwe o o o n n e 9 9 9 9 9 9 9 eee 9 9 9 9 9 _ Card Edge Connector Refer to 2 4 Mounting the Board Connect to the PCI Bus slot of the computer ___ Board ID Setting Switch Refer to 2 3 7 Board ID Setting If mounting multiple Controller Link Support Boards to the computer set the ID number 0 to 3 to identify the Board 7 Backup Power Supply Connector Refer to the Operation Manual W383 Use the enclosed cable connector to connect to the backup power supply Cable Bracket Screw Holes Use to install the Optical Fiber Cable Bracket Indicators Communications Connector Refer to the Operation Manual Refer to the Operation Manual W383 W383 Connect the communications cable H PCF Display the status of the Board and cable of the Controller Link Network Network Dimensions 126 107 K R O ES O m LO E AR n x Unit mm Note The dimensions given in parentheses are for when the previous connector is mounted Parts Names and Functions Section 2 1 2 1 3 Optical Ring Model for GI Cable 3G8F7 CLK53 E and 3G8F7 CLK52 EV1 e 9 o9 9 ee ee wee o o o f n 9 9 9 9 9 9 9 9 9
44. new hardware 19 Installing the Controller Link PCI Drivers Section 3 2 5 Select the Other Device option and click the Next Button Add Remove Hardware Wizard Hardware Type What type af hardware do you want to install Select the type of hardware you want to install Hardware types Multifunction adapters 1 Multi port serial adapters lt gt MwaveDSP B Network adapters im NT ApmLegacy Support Cb PCMCIA adapters 4 Ports COM amp LPT i Printbar hd Back Cancel 6 Click the Have Disk Button Add Remove Hardware Wizard Select a Device Driver Which diver do vou want to install for this device i Select the manufacturer and model of your hardware device and then click Nest IF you have a disk that contains the driver pon want to install click Have Disk Manufacturers Models USE Audio Device Generne USB Audio Standard IDE amp TA ATAPI car Standard Infrared Part Standard Modem Types Standard port types Have Disk Back Cancel 7 Insert the applications CD ROM first specify the CD ROM drive and click the OK Button 20 Installing the Controller Link PCI Drivers Section 3 2 8 Click the Browse Button and select the D WDM CLK PCI Folder on the applications CD Install From Disk 3 i xl Insert the manufacturer s installation disk into the drive OK selected and then click OK Cancel Copy m
45. oller Link functionality that is enabled with version 1 Refer to SEC TION 1 Outline for details 2 If not creating user applications using MS C the C Library is not required 3 The Setup Diagnostic Utility is used only when setting up the Support Board The installation procedure is given below 1 2 3 1 Install the PCI Controller Link Support Board drivers Windows XP Win dows 2000 or Windows 98 only 2 Install the FinsGateway Version 2003 PCI CLK Edition or FinsGateway Version 3 PCI CLK Edition and set the drivers 3 Install the C Library and the Setup Diagnostic Utility Only if using the C Library or Setup Diagnostic Utility 4 Make detailed Board settings using FinsGateway Refer to page 26 Set ting Drivers 3 2 Installing the Controller Link PCI Drivers If using Windows XP Windows 2000 or Windows 98 install the PCI Control ler Link drivers using the operating system s Found New Hardware Wizard function If using Windows NT4 0 proceed to 3 3 Installing FinsGateway 3 2 1 Installation Procedure This section describes an installation example using Windows 2000 If using Windows 98 the operations and windows displayed may be slightly different but installation can be performed using the same procedure 14 Installing the Controller Link PCI Drivers Section 3 2 System Has Detected the New Drivers Note It is necessary to log on as a user with Administrator privileges to perform the in
46. or 01 compatibles to a Controller Link Network PCI Bus Installation Guide this manual 3G8F7 CLK13 E 3G8F7 CLK12 Operating procedures for Controller Link Support W383 EV1 3G8F7 CLK53 E 3G8F7 Boards for PCI bus connections Controller Link Sup CLK52 EV1 3G8F7 CLK23 E port Boards are used to connect IBM PC ATs or com 3G8F7 CLK21 EV1 patibles to a Controller Link Network Controller Link Support Boards for PCI Bus Operation Manual 3G8F5 CLK11 E 3G8F5 CLK21 E Installation setup and operating procedures for Con W307 Controller Link Support Boards for troller Link Support Boards for ISA bus connections ISA Bus Operation Manual Controller Link Support Boards are used to connect IBM PC ATs or compatibles to a Controller Link Net work C200HW ZWSAT2 E V2 Control Installation and operating procedures for the Controller W369 ler Link Support Software Opera Link Support Software The Controller Link Support tion Manual Software enables manually set data links and other procedures for a Controller Link Network CS1W CLK23 CS1W CLK21 V1 Installation setup and operating procedures for the W309 CJ1W CLK23 CJ1W CLK21 V1 Wired and Optical Controller Link Units Controller Link C200HW CLK21 CVM1 CLK21 Units are used to connect C200HX HG HE CV series CQM1H CLK21 and CS1 series PCs to a Controller Link Network Controller Link Units Wired and Optical Operation Manual CS1W CLK13 CS1W CLK12 V1 Instal
47. resent a risk to life or property Please know and observe all prohibitions of use applicable to the products NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user s programming of a programmable product or any consequence thereof xii Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons It is our practice to change model numbers when published ratings or features are changed or when significant construction changes are made However some specifications of the products may be changed without any notice When in doubt special model numbers may be assigned to fix or establish key specifications for your application on your request Please consult with your OMRON representative at any time to confirm actual specifications of purchased products DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes even when tolerances are shown PERFORMANCE DATA Performance data given in this manual is provided as a guide for the user in determining suitability and does not constitute a warranty
48. s e Install the Board according to instructions in the operation manuals Improper installation may cause faulty operation e When using the Optical Ring Controller Link Support Board for public util ities systems such as electricity gas or water supply use the Optical Ring mode and provide appropriate fail safe measures XIX Application Precautions XX SECTION 1 Outline This section describes the configuration of the Controller Link network system and the product configuration and operating environment of the Controller Link Support Boards fel Product Coniieuranon porcinos 2 te Operating EnvitOninent sa our tou ore ERR ete abd alee t Gear eae AA 2 1 3 Application Procedure siot ERI EPI SERRE ES EA ue 4 Product Configuration Section 1 1 1 1 Product Configuration The following table lists the product configuration for Controller Link Support Boards for PCI Bus connections Wired System 3G8F7 CLK23 E e Controller Link Support Board x 1 3G8F7 CLK21 EV 1 e CD ROM x 1 e Operation Manual x 1 e Communications connector x 1 e Board ID switch No indicator label x 1 User registration card software user agreement x 1 Optical Ring 3G8F7 CLK13 E e Controller Link Support Board x 1 oystem for 3G8F7 CLK12 EV1 e CD ROM x 1 H PCF Cable Operation Manual x 1 Optical Fiber Cable Bracket x 1 Optical Ring 3G8F7 CLK53 E Power supply connector x 1 System for Gl 3G8F7 CLK52 EV1 Board ID switch No
49. s or short circuiting pins e Connecting or disconnecting any cables or connectors N Caution Failure to abide by the following precautions could lead to faulty operation of the computer or the system or could damage the Controller Link Support Board for PCI Bus or related devices Always heed these precautions Fail safe measures must be taken by the customer to ensure safety in the event of incorrect missing or abnormal signals caused by broken signal lines momentary power interruptions or other causes e Always use the power supply voltage specified in the operation manuals An incorrect voltage may result in malfunction or burning e Take appropriate measures to ensure that the specified power with the rated voltage and frequency is supplied Be particularly careful in places where the power supply is unstable An incorrect power supply may result in malfunction e Install external breakers and take other safety measures against short cir cuiting in external wiring Insufficient safety measures against short cir cuiting may result in burning e Disconnect the functional ground terminal when performing withstand voltage tests Not disconnecting the functional ground terminal may result in burning e Do not attempt to take the Boards apart to repair the Boards or to modify the Boards in any way Be sure that all the mounting screws terminal screws and cable connec tor screws are tightened to the torque specified in this
50. stallation 12 3 1 When the computer is started after the Board has been mounted the Board will be detected as new hardware and the Found New Hardware Wizard will start Click the Next Button ce Network Controller Found New Hardware Wizard Installing Welcome to the Found New Hardware Wizard This wizard helps you install a device driver hor a hardware device Ta continue click Next 4 Back E Cancel 2 If the Install Hardware Device Drivers Window is displayed select the Search for a suitable driver for any device recommended option and click the Next Button Found New Hardware Wizard Install Hardware Device Drivers A device diver is a software program that enables a hardware device to work with lt an operating system This wizard wall complete the installation for this device o Nebwork Controller A device driver is a software program that makes a hardware device work Windows needs driver files For your new device To locate driver files and complete the Installation click Next What do you want the wizard to do Search for a suitable driver for my device recommended C Display a list of the known drivers for this device so that can choose a specific driver lt Back Cancel 15 Installing the Controller Link PCI Drivers Section 3 2 3 Insert the applications CD ROM first select the CD ROM Drives option in the Locate Driver Files Window and click
51. stems in the following locations e Locations subject to static electricity or other forms of noise e Locations subject to strong electromagnetic fields e Locations subject to possible exposure to radioactivity e Locations close to power supplies The operating environment of the Controller Link Support Board for PCI Bus or the computer can have a large effect on the longevity and reliability of the system Improper operating environments can lead to malfunction failure and other unforeseeable problems with the Controller Link Support Board for PCI Bus or the computer Be sure that the operating environment is within the specified conditions at installation and remains within the specified conditions during the life of the system xvii Application Precautions 5 5 Application Precautions Observe the following precautions when using the Controller Link Support Board for PCI Bus or the computer into which it is installed N WARNING Failure to abide by the following precautions could lead to serious or possibly fatal injury Always heed these precautions e Always ground the system to 100 Q or less when installing the system to protect against electrical shock e Always turn off the power of the computer before attempting any of the following Performing any of the following with the power supply turned on may lead to electrical shock e Installing or removing the Support Board e Assembling the Units e Setting DIP switche
52. the Next Button Found New Hardware Wizard Locate Driver Files 7 Where do you want Windows to search for driver files Search for driver files for the following hardware device 2 Network Controller The wizard searches for suitable drivers in its driver database on pour computer and in any of the following optional search locations that you specify To start the search click Next IF wou are searching on a floppy disk or CD ROM drive insert the floppy disk or CD before clicking Next Optional search locations Iv CD ROM drives Specify a location Microsoft Windows Update Back Cancel In Windows 98 select the Specify a location option select the CD ROM drive directory as shown below and click the OK Button Install From Disk 3 x Insert the manufacturer s installation disk into the drive Dk a selected and then click OE Cancel Copy manufacturer s files from D WDMACLK PC 16 Installing the Controller Link PCI Drivers Section 3 2 4 Click the Next Button Found New Hardware Wizard Driver Files Search Results The wizard has finished searching Far driver files for pour hardware device The wizard found a driver for the following device F Network Controller Windows found a driver for this device To install the driver Windows Found click Nest ei gd wdm sclk per scllper inf Cancel Installation has been completed Found New Hardware
53. there are no duplicate Unit addresses for Boards mounted to the same computer Set the token link and token Bus mode This setting is only possible for Optical Fiber models Make sure there are no duplicate settings for any node on the same Controller Link network Set the baud rate This setting is only possible for Wired models Make sure there are no duplicate settings for any node on the same Controller Link network Set the Board startup mode The Board setting is usually Polling Node Set the mode to Polled Node when replacing the Board 1 Select Max Node Number set 62 to configure a wired network containing up to 62 nodes When this is done all nodes on the same network must support networks containing 62 nodes 2 When configuring a network containing between 33 and 62 nodes the fol lowing Units and Board must be used at all nodes If these Units Board are not used the network will not work with more than 32 nodes If networks with 32 or fewer nodes are being used clear the selection for Max Node Number set 62 e CS1W CLK23 e CS1W CLK21 EV1 e CJ1W CLK23 e CJ1W CLK21 EV1 e 3G8F7 CLK23 E e 3G8F7 CLK21 EV 1 3 If connecting an Optical Fiber model i e the model number ends in CLK11 set the mode to Token Bus mode Installing FinsGateway Section 3 3 1 2 3 1 Click the Start Button and select Programs FinsGateway and Fins Gateway Configuration SES windows Update Programs fd Accessories En
54. utomati duplication cally on the PCI bus In computers using an ISA bus the IRQ may be duplicated with the ISA bus thus pre venting the computer from starting Perform one of the following operations to prevent IRQ duplication with the ISA bus Display the computer BIOS menu and set Plug amp Play to dis abled Display the computer BIOS menu and set the IRQ used by the ISA bus to Reserved auto allocation prohibited using the PCI bus IRQ allocation settings For display and setting procedures for the computer BIOS menu refer to the computer user manual Check the IRQ used by the ISA bus using the following procedure Start the computer before mounting the Board Click the Start Button select Settings and then Control Panel from the Windows Start Menu Double click the System Icon and click the Device Manager Tab Click the Properties Button for the ISA board using IRQ and then click the Resources Tab to check the IRQ status 2 3 Switch Settings 2 3 1 Board ID Setting Note A maximum of four Boards can be mounted to one computer The Board ID is used by the computer to identify individual Boards when multiple Boards have been mounted Make the settings using a small flat blade screwdriver Settings can be made between 0 and 3 in decimal provided that each ID number is used only once on the same computer 1 m Make the settings so that each ID number is used only once on the same computer

3G8F7-CLK_ Installation Manual

Contents

Download Pdf Manuals

Related Search

Related Contents