User Manual
Contents
1. 30012644u3uk one gt remote OneRemote converter Type 30012644 User Manual Operate with Beolink Lava motorized TV wallmount Type LRM 901 S Type LRM 901L one gt remote Congratulations The controller from www oneremote dk can fully operate your motorized Lava wallmount using your Bang amp Olufsen remote control terminal Beolink1000 Beo4 Beo5 or Beo6 remote controls can be used This controller is ready for use plug amp play if the wallmount is installed accordingly to its installation guide one gt remote The converter The converter operates using a IR receiver that captures the IR control in parallel with your B amp O TV When is pressed on the Bang amp Olufsen remote control the IR receiver captures this simultaneously with the TV and moves the TV to the preprogrammed viewing position See the Lava installation guide of how to set the viewing position of the TV When the TV is turned off with the WKE button on the Bang amp Olufsen remote control the Lava wall mount moves the TV close to the wall The command STAND andthe lt lt gt buttons can be used to position the TV in other viewing positions than the preprogrammed Programming If the Lava wall mount has been installed accordingly to the Lava installation guide using the Lava remote control there is no programming to be made If the Lava wall mount has been programmed for use with another remote control than the original L2. ava remote control the wall mount has to be programmed with the Lava remote control as the OneRemote controller uses this command set It is possible to program the wall mount with the OneRemote converter if the original Lava remote control is not available you can program the Lava Wall mount with this converter and your B amp O remote control To do this follow these steps 1 Press the little red button on the OneRemote converter till the LED turns red 2 Press ME and wait 1 second till the wall mount moves ONE time 3 Press MESE and wait second till the wall mount moves ONE time 4 Press MMM and wait 1 second till the wall mount moves TWO times 5 Press and wait 1 second till the wall mount moves ONE time 6 Press and wait 1 second till the wall mount moves TWO times 7 Press MESE and wait 1 second till the wall mount moves ONE time 8 Press MESE and wait 1 second till the wall mount moves TWO times 9 Press MESE and wait 1 second till the wall mount moves ONE time 10 Press MESH and wait 1 second till the wall mount moves TWO times Programming is now complete Programming can be aborted pressing at any time one gt remote White stop sets the StandBy position Grey stop sets the TV position Align as shown in picture above Align as shown in picture above one gt remote Installation The OneRemote converter is delivered with a 455Khz IR receiver and a Jack cable Once connected the converter must
3. be programmed as described on page 2
Download Pdf Manuals
Related Search