Baumatic BT2760SS User's Manual
Contents
1. 6 buttons o The oven will calculate what time it needs to switch on at so that your food will cook for the length of time that you selected It will automatically switch itself on once it reaches the time of day that it has calculated o When the time of day reaches the end of cooking time that you set the oven will switch off and an alarm will sound The word AUTO will flash and the heating symbol will disappear The alarm can be silenced by pressing the end cook 3 or duration button 2 o You will need to return the oven to manual operation mode once the start and end time function has been used To do this you should press the manual operation button 4 the word AUTO will disappear from the display and the manual operation symbol will appear instead o Important If you do not turn the thermostat control knob and oven function selector knob to 0 Then the appliance will continue to operate as soon as you press the manual operation button 16 Selecting a cooking function and temperature Selecting manual operation mode After your appliance is connected to your mains supply for the first time the numbers on the timer display will flash Before you can select a cooking function or set a temperature you must set the appliance into manual operation mode o To select manual operation mode press the manual operation button 4 on the control panel Before first use o To remove2. Instruction manual User Manual for your Baumatic BT2760SS 90 cm Multi function twin cavity cooking theatre x E Baumatic You will be mine NOTE This User Instruction Manual contains important information including safety amp installation points which will enable you to get the most out of your appliance Please keep it in a safe place so that it is easily available for future reference for you or any person not familiar with the operation of the appliance DD 19 12 06 Environmental note 4 Important safety information 5 9 Specifications 9 10 Control panel 11 Thermostat control knob main oven 11 Oven function selector knob main oven 11 Oven function and thermostat control knob secondary oven 11 Oven programmer timer 11 Oven programmer timer display 12 Setting and using the oven programmer timer 12 Selecting manual operation mode 12 Setting the time of day 12 Setting the minute minder function main and secondary oven 13 Setting the duration function main oven only 14 Setting the end cook function main oven only 15 Setting the start and end time function main oven only 16 Selecting a cooking function and temperature 17 Selecting manual operation mode 17 Before first use 17 Selecting a main oven function 17 18 Thermostat control knob main oven 19 Selecting an oven function and temperature secondary oven 19 Oven operating light 19 Cooking guidelines 20 Warnings 20 21 Using
3. ensure that the gas supply conditions nature of the gas and gas pressure and the adjustment conditions are compatible The adjustment conditions for this appliance are stated on the rating plate which can be found on the back cover o This appliance is not designed to be connected to a combustion product evacuation device Particular attention should be given to the relevant requirements regarding ventilation o Connection to the cooker should be made with an approved appliance flexible connection to BS 669 o If the cooker has been converted for use with LPG then it should be connected to the gas supply using a bayonet type hose The hose MUST be suitable for use with LPG gas They are identifiable by a red band or stripe o A hose length of 0 9m to 1 25m is recommended The length of hose chosen should be such that when the cooker is in situ the hose does not touch the floor o Care should be taken to ensure that the temperature rise of areas at the rear of the cooker that are likely to come in contact with the flexible hose do not exceed 70 C o Gas pressure may be checked on a semi rapid hob burner Remove the appropriate injector and attach a test nipple Light the other burners and observe that the gas pressure complies with the gas standards in force OODDO0000000000000000000000000000 hh STOP o This cooker can be connected to the supply both on the right and left hand side at the rear of the cooker To reverse
4. be installed in accordance with the standards currently in force This appliance must be used by a trained person for domestic purposes only Specifications Product dimensions Height 860 920 mm Width 895 mm Depth 600 mm os Lm F i i a Product specifications OO OO GO CO OO Oo 0 OO OO 5 burner gas hob 1 x 3 50 kW wok burner 1 x 3 00 kW rapid burner 2 x 1 70 kW semi rapid burners 1 x 1 00 kW auxillary burner Heavy duty cast iron pan stands Underknob auto ignition 8 function main oven 5 function secondary oven Oven energy efficiency class C Main oven capacity 52 litres Secondary oven capacity 31 litres Storage compartment capacity 40 litres LED fully programmable timer 2 Cooling fans Thermostatically controlled grills o Double glazed removable doors o Adjustable feet Standard accessories Wok stand Removable side racks 2 x Safety shelves Enamelled drip tray Trivet LPG conversion jets Or gt Or On OO Optional extras o BPSI1 Pizza stone o BTGRID Double sided griddle plate Electrical details Rated Voltage 230 Vac 50 Hz Supply Connection 20 A double pole switched fused outlet with 3mm contact gap Max Rated Inputs 3 8 kW Mains Supply Lead 3 core x 2 5 mm not supplied Oven Light Bulb E14 25 W 300 C screw type pigmy Gas details Gas Connection Type 1 2 BSP Gas Type Natural Gas 20 mbar Gas Type LPG See table on page 31 for this info
5. display After getting the display to the correct time release the minus and plus buttons After a few seconds the time will fix in the display and you will be able to use your oven 12 Setting the minute minder function main and secondary oven You are able to set the minute minder at any time regardless of whether an oven function has been selected You can seta period of time using the minute minder function and an alarm will sound when this period of time has elapsed O Press the minute minder button 1 the display will show a value of 00 00 Set the period of time that you wish the minute minder to countdown for by using the minus 5 and plus 6 buttons Once the display has got to your desired countdown time let go of the minus and plus buttons The minute minder symbol 8 will appear on the timer display Once a countdown time has been set it is possible to shorten or lengthen the time by using the minus 5 or plus 6 buttons An alarm will sound when the countdown time has elapsed The alarm can be silenced by pressing the minute minder button 1 Important The oven will continue to heat once the alarm has been silenced If you have finished cooking then you should turn the oven function selector and thermostat control knob to O 13 Setting the duration function main oven only This function will allow you to set a countdown time similar
6. more detailed information about treatment recovery and recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product O o The packaging materials that Baumatic uses are environmentally friendly and can be recycled o Please discard all packaging material with due regard for the environment Important safety information Your safety is of the utmost importance to Baumatic Please make sure that you read this instruction booklet before attempting to install or use the appliance If you are unsure of any of the information contained in this booklet please contact the Baumatic Technical Department General Information o This appliance is designed for domestic household use and for the cooking of domestic foodstuffs o IMPORTANT The adjacent furniture and all materials used in the installation must be able to withstand a minimum temperature of 85 C above the ambient temperature of the room it is located in whilst in use o Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage or discolouration at temperatures below the guidelines given above o Any damage caused by the appliance being installed in contravention of this temperature limit or by placing adjacent cabinet materials closer than 20 mm to the appliance will be the liability of the owner o For use in leisure accommodat
7. the appliance and no more than 1 25m away from it o The spur outlet must still be accessible even when your oven is located in its operating position o Cable type HO5 RRF 3 core x 2 5 mm2 Connecting the mains supply cable IMPORTANT The wires in the mains lead are coloured in accordance with the following code GREEN AND YELLOW EARTH BLUE NEUTRAL BROWN LIVE o Open the mains terminal block cover as shown unscrew the cable clamp A and unscrew not fully the screws in the mains terminal block L N E which secure the three wires of the mains cable o Fit the cable and refit the cable clamp A o Allow sufficient cable length for the cooker to be pulled out for cleaning but do not let it hang closer than 50mm to the floor 34 O The cable can be looped if necessary but make sure that is not kinked or trapped when the cooker is in position Replacing the mains supply cable If the mains supply cable is damaged then it must be replaced by an appropriate replacement which can be obtained from the Baumatic Spares Department The mains supply cable should be replaced in accordance with the following instructions O Switch the appliance off at the control switch Open the box of the supply board Unscrew the clamp A fixing the cable Replace the cable with one of the same length and in accordance with the specification given above The green yellow earth wire must be connected to the terminal
8. the hob top 21 Automatic electric ignition 21 22 Energy saving tips 22 Cleaning and maintenance 23 Cleaning the hob burners 24 Replacing the oven bulb 24 Removing the oven door for cleaning 25 Removing the inner door glass for cleaning 25 26 Installation 26 Positioning 26 27 Gas connection 28 29 Gas Safety Installation and Use Regulations 29 Gas connection 30 Gas adjustment Conversion to LPG and flow adjustment 31 Minimum flow adjustment for hob gas taps 32 Fitting a stability chain 33 Electrical connection 34 Connecting the mains supply cable 34 35 Replacing the mains supply cable 35 My appliance isn t working correctly 36 37 Baumatic Ltd Conditions of guarantee 38 Contact details 39 Environmental note This appliance is marked according to the European directive 2002 96 EC on Waste electrical and Electronic Equipment WEEE By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The symbol _ on the product or on the documents accompanying the product indicates that this appliance may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out in accordance with local environmental regulations for waste disposal For
9. to the minute minder function However the oven will no longer continue to heat once the countdown period has elapsed O Use the thermostat control knob to set the temperature that you require The manual operation symbol 9 will appear on the display Use the oven function selector knob to select the mode of cooking that you require It is then possible to set the duration of the cooking time that you require Press the duration button 2 and the display will show a value of 00 00 Set the period of time that you wish the duration function to countdown for by using the minus 5 and plus 6 buttons Once the display has got to your desired countdown time let go of the minus and plus buttons The countdown will start immediately and the word AUTO 7 will appear on the timer display Once a countdown time has been set it is possible to shorten or lengthen the time by using the minus or plus buttons An alarm will sound when the countdown time has elapsed and the oven will switch off The word AUTO will flash and the heating symbol will disappear The alarm can be silenced by pressing the duration button You will need to return the oven to manual operation mode once the duration function has been used To do this you should press the manual operation button 4 the word AUTO will disappear from the display and the manual operation symbol will appear instead Impor
10. any residue from the oven that may have been left from the manufacturing process you should select either the fan or conventional oven function and turn the thermostat dial to its maximum temperature setting For the secondary oven you Should select the conventional oven function and select its maximum temperature setting o It is perfectly normal for a smell to be produced during this process o You should make sure that any windows in the room are left open during this process o It is advisable for you not to remain in the room whilst the burning off process is taking place o You should leave each oven on maximum setting for 30 40 minutes o IMPORTANT You should not burn off both ovens simultaneously Selecting a main oven function The main oven function selector knob should be turned clockwise and used to select the particular mode of cooking that you require The appliance will utilise different elements within the oven cavity depending on the oven function that you select When a function is selected the power indicator light will come on 17 There are eight cooking functions available on your appliance OVEN LIGHT Separate light control which allows the light to be switched on even when the oven is switched off DEFROST MODE The fan runs without heat to reduce the defrosting time of frozen foods The time required to def
11. burners should be cleaned once a week or more frequently if they get soiled O Remove the hob burners by pulling them upwards and away from the hob top Soak them for about ten minutes in hot water and a little detergent After cleaning and washing them wipe and dry them carefully Before placing the burners back on the hob top make sure that the gas jet is not blocked IMPORTANT Make sure that you reassemble the burners in the Original way Replacing the oven bulb O O O IMPORTANT The oven must be disconnected from your mains supply before you attempt to either remove or replace the oven bulb E 44 o Remove all oven shelves 25 W 230 Y and the drip tray o Unscrew the lamp cover o Unscrew the bulb and remove it from its holder Replace the bulb with a 25 W 300 C screw type pigmy Do not use any other type of bulb Screw the lamp cover back into its original position 24 Removing the oven door for cleaning Open the oven door fully The hinges A are provided with two movable hooks B Rotate the hooks into the slot C You should grip the sides of the door at the centre and then incline it slightly towards the oven cavity and then by pulling it gently away from the oven cavity IMPORTANT You should make sure that the door is supported at all times and that you place the door on some padded material whilst cleaning it The oven door and door glass should only be cleaned usi
12. con toast and meat etc Oven operating light This light will come on to indicate that the oven s heating elements are in operation The light will turn off when the temperature set on the thermostat control knob has been reached It will cycle on and off throughout the cooking time You should not place food inside the cavity until the correct cooking temperature has been reached 19 Cooking guidelines O Please refer to the information given on food packaging for guidance on cooking temperatures and times Once familiar with the performance of your appliance temperatures and times can be varied to suit personal preference If you are using the fan oven function then you should follow the information given on the food packaging for this particular mode of cooking Make sure that frozen foods are thoroughly thawed before cooking unless the instructions on the food packaging advise that you can cook from frozen You should pre heat the oven and not place food inside of it until the oven operating light has gone off You can choose not to pre heat when using the fan oven mode however you should extend the cooking time given on the food packaging by approximately ten minutes Before cooking check that any unused accessories are removed from the oven Place cooking trays in the centre of the oven and leave gaps between the trays to allow air to circulate Try to open the door as little as possible to view the d
13. e cupboard and its contents o The cooker may be located in a kitchen or a bedroom but not in a room containing a bath or shower The cooker must not be installed in a bedroom of less than 20m in size o LPG models must not be installed in a room or internal space below ground level e g in a basement o The cooker is fitted with four legs that can be adjusted to match the height of your kitchen cabinets o To assemble them it is necessary to raise the cooker and to screw the four legs into position on each corner of the base of the appliance 27 O IMPORTANT They must be screwed clockwise into position and not just slotted into the holes on each corner Gas connection This appliance must be installed by a competent person in accordance with the current versions of the following UK United Kingdom or ROI Republic of Ireland Regulations and Safety Standards or their European Norm Replacements Important information O This cooker is supplied to run on natural gas only and cannot be used on any other type of gas without modification Conversion for use on LPG and other gases must only be undertaken by a qualified person For information on the use of other gases please contact the Baumatic Technical Department The cooker must be installed by a qualified person in accordance with the current edition of the Gas Safety Installation and Use Amendment Regulations and the relevant building I E E Regulatio
14. e it is operated for the first time and after each use This will avoid residual food stuffs becoming baked on the oven cavity After residues have been baked on several times they are far more difficult to remove o Never clean the oven surfaces by steam cleaning o The oven cavity should only be cleaned with warm soapy water using either a sponge or soft cloth No abrasive cleaners should be used o Any stains that may appear on the bottom of the oven will have Originated from food splashes or spilt food these splashes occur during the cooking process These could possibly be a result of the food being cooked at an excessively high temperature or being placed in cookware that is too small o You should select a cooking temperature and function that is appropriate for the food that you are cooking You should also ensure that the food is placed in an adequately sized dish and that you use the drip tray where appropriate o Outer parts of the oven should only be cleaned with warm soapy water using either a sponge or soft cloth No abrasive cleaners should be used o If you use any form of oven cleaner on your appliance then you must check with the manufacturer of the cleaner that it is Suitable for use on your appliance o Any damage that is caused to the appliance by a cleaning product will not be fixed by Baumatic free of charge even if the appliance is within the guarantee period 23 Cleaning the hob burners The hob
15. e juices in such as steaks hamburgers some vegetables etc FAN AND LOWER ELEMENT This method of cooking utilises the bottom element in conjunction with the fan which helps to circulate the heat This function is suitable for sterilising and preserving jars 18 Thermostat control knob main oven The oven thermostat control knob should be turned clockwise and it sets the required temperature of the oven It is possible to regulate the temperature within a range of 60 250 C If you turn the control knob clockwise it will automatically select a conventional oven function T i and you can regulate the temperature between 60 aS 4 250 C AL a 3 i e Ne ae j F ih fe So To use one of the other functions you should turn the dial past the max setting and select the following functions OVEN LIGHT Separate light control which allows the light to be switched on even when the oven is switched off UPPER ELEMENT ONLY This method of cooking uses the outer a part of the top element to direct gentle heat downwards onto the food For gentle cooking browning or keeping cooked dishes warm LOWER ELEMENT ONLY This method of cooking uses the lower element to direct heat upwards to the food For slow cooking recipes or for warming up meals yee GRILL ELEMENT ONLY This method of cooking utilises the top element which directs heat downwards onto the food This function is suitable for grilling small portions of ba
16. ed when the flame has a length of about 3 4 mm o For butane propane gas the adjusting screw must be tightly screwed in o Refit the control knob o Make sure that the flame does not go out by quickly turning from maximum flow to minimum flow If it does then remove the control knob and make further adjustments to the gas flow testing it again once the adjustment has been made 22 Fitting a stability chain IMPORTANT It is a legal requirement for your CORGI registered installer to fit a stability chain stability hook COOKER Firmly fix the chain to the rear of the cooker The stability chain should be as short as is practical The stability hook should be securely fixed to the fabric of the building in an adjacent position to the safety chain at the rear of the appliance The chain should be kept as short as is practical 33 Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I E E Regulations and in compliance with Baumatic s instructions Before connecting the appliance make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage WARNING THIS APPLIANCE MUST BE EARTHED o This appliance must be wired into a 20 A double pole switched fused spur outlet having 3 mm contact separation and placed in an easily accessible position adjacent to the appliance It should not be located above
17. ion vehicles please refer to the appropriate information given in the installation instructions for this appliance o IMPORTANT Baumatic Ltd DO NOT recommend that this appliance is installed on any type of marine vessel o The use of this appliance for any other purpose or in any other environment without the express agreement of Baumatic Ltd will invalidate any warranty or liability claim o Your new appliance is guaranteed against electrical or mechanical defects subject to certain exclusions that are noted in Baumatic s Conditions Of Guarantee The foregoing does not affect your statutory rights o Repairs may only be carried out by Baumatic Service Engineers or their authorised service agent Warning and safety instructions o This appliance complies with all current European safety legislation Baumatic do wish to emphasise that this compliance does not remove the fact that the appliance surfaces will become hot during use and retain heat after operation Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time During and after use all surfaces will become hot o If it is necessary for younger family members to be in the kitchen please ensure that they are kept under close supervision at all times General Safety w Make sure that you understand the controls before using the appliance Check tha
18. ise rotation of the control knob o All operation positions must be selected between the maximum and minimum positions o Never select a knob position between the maximum and off position Automatic electric ignition To ignite a burner o Press in the control knob of the burner that you wish to light and turn it anti clockwise to the minimum position o Ifyou keep the control knob depressed the automatic ignition for the burner will operate 21 o Incase of power failure the burners can be lit by carefully using a match Energy saving tips BURNERS PANS RAPID 180 mm SEMIRAPID 120 mm AUXILIARY 80 mm WORK 220 mm o The diametre of the bottom of the pan should correspond to that of the burner o The burner flame must never extend beyond the diametre of the pan o Use flat bottomed pans only o When possible keep a lid on the pan whilst cooking o Cook vegetables with as little water as possible to reduce cooking times IMPORTANT Always place pans centrally over the hob burners and position them so that the handles cannot get accidentally caught or knocked off You should also make sure that the handle is not over one of the other hob burner flames 22 Cleaning and maintenance Cleaning operations must only be carried out when the oven is cool The appliance should be disconnected from your mains supply before commencing any cleaning process o The oven should be thoroughly cleaned befor
19. ishes o The oven light will remain on during cooking Warnings o Keep the oven door closed when using any of the grill or oven functions Do not use aluminium foil to cover the grill pan or heat items wrapped in aluminium foil under the grill The high reflectivity of the foil could potentially damage the grill element You should never line the base of your oven with aluminium foil During cooking never place pans or cookware directly onto the bottom of the oven They should always be placed on the shelves provided The grill heating element becomes extremely hot during operation avoid touching it inadvertently when handling the food which you are grilling 20 o Important Be careful when opening the door to avoid contact with hot parts and steam o The drip tray handle should only be used to reposition the drip tray and NOT for removing it from the oven cavity When removing the drip tray you should ALWAYS use an oven glove o The drip tray handle should not be left in position when the appliance is switched on o IMPORTANT In case of fire close the main valve of the gas Supply and switch off the electricity supply to the appliance NEVER pour water onto burning oil Using the hob top The following symbols will appear on the control panel next to each control knob Black circle gas off Large flame maximum setting Small flame minimum setting o The minimum setting is at the end of the anti clockw
20. lar basis Great care should be taken whilst using this appliance and when following the cleaning procedure IMPORTANT The appliance must be disconnected from the mains before following the cleaning procedure Installation O This appliance must be correctly installed by a suitably qualified person strictly in accordance with the manufacturer s instructions Please see the specific section of this booklet that refer to installation Baumatic Ltd declines any responsibility for injury or damage to person or property as a result of improper use or installation of this appliance Heat steam and moisture will be created during use of the appliance take care to avoid injury and ensure that the room is adequately ventilated If the appliance is going to be used for prolonged periods of time then additional ventilation may be required Please consult with your qualified installer if you are in any doubt about the amount of ventilation that you will require Declaration of conformity This appliance complies with the following European Directives 73 23 EEC regarding low voltage 89 336 EEC regarding electromagnetic disturbances 90 396 EEC regarding gas appliances 89 109 EEC regarding materials in contact with food o The above directives comply with 93 68 EEC regarding CE marking o The manufacturer declares that the oven is built using certified materials and requires the appliance to
21. lations are followed o Excess steam from the oven vents out at the top back edge of the cooker so make sure that the walls behind and near the cooker are resistant to heat steam and condensation o Your cooker must stand on a flat surface so that when it is in position the hob is level When in position check that the cooker is level by using a spirit level and adjust the 2 feet at the rear and the 2 feet at the front if necessary o Remember that the quantity of air necessary for combustion must never be less than 2m3 h for each kW of power see total power in kW on the appliance rating plate Gas Safety Installation and Use Regulations o It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the Gas Safety Installation and Use Regulations o Itis in your interest and that of safety to ensure compliance with the law o Inthe UK CORGI registered installers work to safe standards of practice The cooker must also be installed in accordance with the current edition of BS 6172 Failure to install the cooker correctly could invalidate the warranty liability claims and lead to prosecution o IMPORTANT It is a requirement for a stability chain to be fitted to the appliance Please see page 33 for more detailed information on this 29 Gas connection ALL INSTALLATION AND SERVICE WORK MUST BE CARRIED OUT BY A CORGI REGISTERED ENGINEER o Prior to installation
22. marked It must be about 10 mm longer than the live and neutral wires The blue neutral wire must be connected to the terminal marked with letter N the live wire must be connected to the terminal marked with letter L 35 My appliance isn t working correctly o The oven isn t coming on Check that the oven is in manual operation mode Check that you have selected a cooking function and a cooking temperature o There appears to be no power to the oven and grill x Check that the appliance has been connected to the electrical mains supply correctly Check that the mains fuses are in working order Check that the operating instructions for setting the time of day and putting the appliance into manual operation mode have been followed o The grill function works but the main oven does not Check that you have selected the correct cooking function o The grill and top oven element is not working or cuts out for long periods of time during use x Allow the oven to cool for approximately 2 hours Once cool check whether the appliance is again working properly o My food ts not cooking properly Ensure that you are selecting the correct temperature and the correct cooking function for the food that you are cooking It may be appropriate to adjust your cooking temperature by plus or minus 10 C to achieve the best cooking results o My food is not cooking evenly x Check that the oven has been i
23. ng a damp cloth and a small amount of detergent The cloth MUST NOT have come into contact with any form of cleaning product or chemical previously Replace the oven door by introducing the hinges back into their relevant slots Before closing the doors DO NOT FORGET TO RESET THE MOVABLE HOOKS DO NOT attempt to move the hooks whilst the door is not attached to the oven as the hinges are under high spring tension and injury may result Removing the inner door glass for cleaning O Do not use any abrasive cleaner that could cause damage Remember that if the surface of the glass panel becomes scratched this could lead to a dangerous failure To facilitate cleaning the door glass can be lifted out after removing the fixing screws and turning the metal stoppers that hold the glass in position 25 o When refitting make sure that the glass is correctly seated in the door recess and the correct way round before turning the metal stoppers back to their original position and fully tightening the fixing screws Installation The installation must be carried out by a suitably qualified person in accordance with the current version of the following o UK Regulations and Safety Standards or their European Norm Replacements o Building Regulations issued by the Department of the Environment o Building Standards issued by the Scottish Development Department o IEE Wiring Regulations Electricity At Work Regulati
24. ns Failure to install the appliance correctly could invalidate Baumatic s guarantee and lead to prosecution under the regulations quoted above In the UK CORGI registered installers are authorised to undertake the installation and service work in compliance with the above regulations Ventilation requirements O The room containing the cooker should have an air supply in accordance with the current edition of BS 5440 Part 2 o The room must have opening windows or equivalent some rooms may also require a permanent vent If the room has a volume between 5 and 10m3 it will require an air vent of 50cm effective area Unless it has a door which opens directly to the outside If the room has a volume of less than 5m3 it will require an air vent of 100cm2 effective area 28 o If there are any other fuel burning appliances in the same room the current edition of BS 5440 Part 2 should be consulted to determine air vent requirements o Ensure that the room containing the cooker is well ventilated keep natural ventilation holes or install a mechanical ventilation device mechanical cooker hood o Prolonged intensive use of the appliance may call for additional ventilation either by the opening of a window or by increasing the level of the mechanical ventilation device where present o This cooker is not fitted with a device for discharging the products of combustion Ensure that the ventilation rules and regu
25. nstalled correctly and is level Check that the correct temperatures and shelf positions are being used 36 o The oven light is not working Refer to page 24 and follow the Replacing the oven bulb section o I am getting condensation in my oven Steam and condensation is a natural by product of cooking any food with high water content such as frozen food chicken etc x You may get condensation in the oven cavity and forming between the oven door glasses This is not necessarily a sign that the oven is not working correctly x Do not leave food in the oven to cool after it has been cooked and the oven has been switched off x Use a covered container where practical when cooking to reduce the amount of condensation that forms IMPORTANT If your appliance appears not to be operating correctly then you should disconnect it from your mains supply and then contact the Baumatic Service Department on telephone number 0118 933 6911 DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault then you may be liable for the cost of the call out charge The appliance must be accessible for the engineer to perform any necessary repair If your appliance is installed in sucha way that an engineer is concerned that damage will be caused to the appliance or your kitchen
26. om the original purchase date An additional to 3 year insurance scheme for labour is available should you wish to extend the warranty period Should any person other than an authorised representative of Baumatic Ltd interfere with the appliance the policy is negated and Baumatic Ltd will be under no further liability The guarantee covers the appliance for normal domestic use only unless otherwise stated Any claims made under the terms of the guarantee must be supported by the original invoice bill of sale issued at the time of purchase This guarantee is transferable only with the written consent of Baumatic Ltd If the appliance fails and is considered either not repairable or uneconomical to repair between 12 months 2 years if registered and five years a free of charge replacement will not be offered The guarantee for any replacement will only be for the remainder of the guarantee on the original product purchased The guarantee does not cover Sinks and taps Failure to comply with the manufacturers instructions for use The replacement of cosmetic components of accessories Accidental damage or wilful abuse Subsequent loss or damage owing to the failure of the appliance or electrical supply Incorrect installation Losses caused by Acts of God civil war failure to obtain spare parts strikes or lockouts Filters fuses light bulbs external hoses damage to bodywork paintwork plastic items covers baskets
27. ons o Gas Safety Installation and Use Amendment Regulations O Positioning The adjacent furniture and all materials used in the installation must be able to withstand a minimum temperature of 85 C above the ambient temperature of the room it is located in whilst in use o Your appliance is heavy so you should be careful when moving or positioning it o Do nottry to move the cooker by pulling on either the door handle or control panel min 50 mm min 50 mm min 400 mm i semin 20 mm min 100 mm 26 o The cooker is designed to slot in between 600 mm deep cabinets which are spaced approximately 940 mm apart o It can also be used as freestanding with a cabinet to one side in a corner setting or with its back to a wall o IMPORTANT It must not be situated with either side closer than 20 mm to a combustible wall or cupboard that is taller than the cooker It should not be installed at the end of a run of cabinets if there is a cabinet at immediate right angles to the cooker door o The wall behind the cooker and 450 mm above and across the width of the cooker should be an incombustible material and preferably an easy clean surface such as ceramic tiles o Any overhanging surface or cooker hood should be at least 700 mm above the hob top o Baumatic do not recommend that the cooker is positioned below wall cupboards as the heat and steam from the appliance and what is being cooked may damage th
28. rmation For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice The rating plate for your oven can be located by opening the door of the storage compartment Model Number ceee Serial Number aanse Date of Purchase aaan 10 Control Panel Thermostat control knob main oven o Use this control knob to control the temperature in the oven o Use this control knob to select the oven function and turn on the oven light in the main oven o Use this control knob to select the oven function and turn on the oven light in the secondary oven 11 Oven programmer timer display 7 Auto function symbol 8 Minute minder symbol 9 Manual operation symbol Setting and using the oven programmer timer Selecting manual operation mode After your appliance is connected to your mains supply for the first time the numbers on the timer display will flash Before you can select a cooking function or set a temperature you must set the appliance into manual operation mode o To select manual operation mode press the manual operation button 4 on the control panel Setting the time of day After setting your oven for manual operation you should also set the time of day o Use the minus button 5 and plus button 6 to adjust the time that appears in the
29. rost the food will depend on the room temperature the quantity and type of food Always check food packaging for the defrosting instructions CONVENTIONAL OVEN top and lower element This method of cooking provides traditional cooking with heat from the top and lower elements This function is suitable for roasting and baking on one shelf only FAN OVEN This method of cooking uses the circular element while the heat is distributed by the fan This results in a faster and more economical cooking process The fan oven allows food to be cooked simultaneously on different shelves preventing the transmission of smells and tastes from one dish onto another HALF GRILL This method of cooking utilises the inner part only of the top element which directs heat downwards onto the food This function is suitable for grilling small portions of bacon toast and meat etc The thermostat control Knob must be turned to its maximum setting FULL GRILL This method of cooking utilises the inner and outer parts of the top element which directs heat downwards onto the food This function is suitable for grilling medium or large portions of sausages bacon steaks fish etc Ideally the thermostat control knob should be set to 200 C FAN AND GRILL This method of cooking utilises the top element in conjunction with the fan which helps to provide a quick circulation of heat This function is suitable where quick browning is required and sealing th
30. sound The word AUTO will flash and the heating symbol will disappear The alarm can be silenced by pressing the end cook button o You will need to return the oven to manual operation mode once the end cook function has been used To do this you should press the manual operation button 4 the word AUTO will disappear from the display and the manual operation symbol will appear instead o Important If you do not turn the thermostat control knob and oven function selector knob to 0 Then the appliance will continue to operate as soon as you press the manual operation button 15 Setting the start and end time function main oven only This function will allow you to set a time in the future that the oven switches on at and a time that the oven will switch off at o Use the thermostat control knob to set the temperature that you require The manual operation symbol 9 will appear on the display o Use the oven function selector knob to select the mode of cooking that you require o Press the duration button 2 and the display will show a value of 00 00 Set the period of time that you wish to cook for by using the minus 5 and plus 6 buttons The word AUTO 7 will appear on the timer display o Immediately press the end cook button 3 and the timer display will show the value 00 00 Set the time of day that you want the oven to switch off at using the minus 5 and plus
31. t all of the controls on the appliance are turned off after use v Always stand back when opening the oven door this will allow heat to disperse v Take care when removing items from the oven as the contents may be hot v Always keep the oven doors closed when the oven is not in use Always follow the basic principles of food handling and hygiene this will prevent the possibility of bacterial growth x Always keep ventilation slots clear of obstructions Keep fingers away from the hinge areas when closing the door otherwise you may trap them Oven gloves should be used when placing food in the oven cavity and when removing it Care should be taken to avoid direct contact with any of the elements in the appliance o DO NOT LEAVE THE APPLIANCE UNATTENDED WHILST IN USE Do not place heavy objects on the oven door or lean on the oven door when it is open as this can cause damage to the oven door hinges Nobody should be allowed to sit or stand on any part of the cooker Do not store chemicals food stuffs pressurised containers in or on the cooker or in the cabinets immediately above or near the hob burners Do not heat up unopened food containers as pressure can build up which may cause the container to burst Do not place flammable or plastic items on or near the hob burners these types of materials should also not be placed in the oven or the compartment below the oven Do not leave heated oil or fat unat
32. tant If you do not turn the thermostat control knob and oven function selector knob to 0 Then the appliance will continue to operate as soon as you press the manual operation button 14 Setting the end cook function main oven only This function is similar to the duration function however instead of selecting a period of time that you wish the oven to switch off after You select the time of day that you wish the oven to switch off at o Use the thermostat control knob to set the temperature that you require The manual operation symbol 9 will appear on the display o Use the oven function selector knob to select the mode of cooking that you require o Press the end cook button 3 and the display will show a value of 00 00 Set the time of day that you wish the oven to stop cooking at by using the minus 5 and plus 6 buttons The timer will calculate how long the cooking time will be based on the time of day that you have selected and show it on the display o Once the display has got to the time of day that you want the oven to stop cooking at let go of the minus and plus buttons The countdown will start immediately and the word AUTO symbol 7 will appear on the timer display o When the time is set it can be modified by pressing the minus and plus buttons o When the time of day reaches the end of cooking time that you set the oven will switch off and an alarm will
33. tended as this is a fire risk You should not fill a deep fat frying pan more than one third full of fat or oil you should also not use a lid Do not allow fat or oil to build up in the oven trays grill pan or oven base Do not place pans or baking trays directly on the base of the oven cavity or line it with aluminium foil Do not grill food containing fat without using the grill trivet The grill trivet should never be covered with aluminium foil Do not place hot enamel parts in water leave them to cool first Do not allow vinegar coffee milk saltwater lemon tomato juice or any liquid with high sugar content to remain in contact with the enamel parts of the appliance Spillages should be wiped up immediately Do not allow electrical fittings or cables to come into contact with areas on the appliance that get hot Do not use the appliance to heat the room it is located in or to dry clothing No clothing should be placed over or near to the hob burners or oven door Do not install the appliance next to curtains or soft furnishings Do not attempt to lift or move cooking appliances by using the oven door or handle as this may cause damage to the appliance or result in injury to the person lifting the appliance Do not store chemicals food stuffs pressurised containers in or on the cooker or in cabinets immediately above or next to the cooker Cleaning O O Cleaning of the oven should be carried out on a regu
34. the position remove the blanking plug and refit it to the opposite side to where the hose is being connected o IMPORTANT On completion carry out a gas tightness test 30 Gas adjustment Conversion to LPG and flow adjustment All work must be carried out by a CORGI registered engineer IMPORTANT Always isolate the cooker from the electricity supply before changing the injectors and or adjusting the minimum flow of the burners o Remove the pan stands burners and flame spreaders A o Unscrew the injector B and replace it with the stipulated injector for the new gas Supply see table below TAB a e ee ee a Burners Power Wati asizione type 3 T 5Semi rapide Auxiliary Triple crown NATURAL Pi j Hi k F J Lo LPG BUTANE PROPANE Rapide SEmi rapide Auxiliary Triple crown ii or om Oo Lat fo OF in o Reassemble all the burners carefully in particular you should make sure that the flame spreader is correctly placed on the burner 31 Minimum flow adjustment for hob gas taps All work must be carried out by a CORGI registered engineer o Switch the burner on and set the knob at the minimum position o Remove the knob from the tap and place a small bladed screwdriver to the outside the tap o Unscrew the adjusting screw in order to increase the gas flow or tighten the adjusting screw to decrease the gas flow o The correct adjustment is obtain
35. then he will not complete a repair This includes situations where appliances have been tiled in sealed in with sealant have wooden obstructions placed in front of the appliance like plinths Or any installation other than the one specified by Baumatic Ltd has been completed Please refer to the conditions of guarantee document on page 38 of this instruction manual for clarification of this a7 Baumatic Ltd Conditions of guarantee Dear Customer Your new Baumatic appliance comes complete with a free 12 month guarantee covering both parts and labour costs resulting from defective materials or workmanship Baumatic also gives you the opportunity to automatically extend the guarantee period for a further 12 months at no extra cost giving an initial guarantee period of 24 months The extended guarantee period applies to England Scotland Wales and Northern Ireland only To qualify for your full 24 months guarantee you must register your appliance within 28 days of purchase to be covered under this guarantee This can be done online via www baumatic co uk or through returning the guarantee card which can be found in each new Baumatic appliance In addition your appliance is covered by a 5 year parts warranty Baumatic Ltd will provide free of charge the parts required to repair the appliance only if they are fitted by a Baumatic engineer for any defect that arises due to faulty materials or workmanship within a period of 5 years fr
36. trays shelves burner bases burner caps decals corrosion rubber seals In the course of the work carried out it may be necessary to remove the appliance from it operating position Whilst all reasonable care will be taken Baumatic Ltd cannot accept responsibility for damage sustained to any property whatsoever in this process This guarantee is in addition to and does not diminish your statutory or legal rights Contacting Baumatic Ltd Sales Service Spares Technical Advice TEL 0118 933 6900 TEL 0118 933 6911 TEL 0118 933 6922 0118 933 6933 FAX 0118 9310035 FAX 0118 986 9124 FAX 0118 933 6942 0118 933 6942 For ROI Republic of Ireland please contact one of the numbers below TEL 01 6266798 FAX 01 6266634 Thanks you for buying Baumatic Applies to UK Scotland Wales amp Northern Ireland only Republic of Ireland has 1 year labour amp 1 year parts warranty only 38 i Baumatic You will be mine Headquarters Baumatic Ltd Baumatic Buildings 6 Bennet Road Reading Berkshire RG2 0QX United Kingdom Sales Telephone 44 118 933 6900 Sales Fax 44 118 931 0035 Service Telephone 44 118 933 6911 Service Fax 44 118 986 9124 Spares Telephone 44 118 933 6922 Technical Advice Telephone 44 118 933 6933 E mail sales baumatic co uk technical baumatic co uk Http Internet site www baumatic com 39 Baumatic www baumatic cam
Download Pdf Manuals
Related Search