Admiral Craft PW-16 Owner's Manual
Contents
1. PW 16 PW 20 Pizza Display Cases This manual contains important information regarding your Admiral Craft unit Please read this manual thoroughly prior to equipment set up operation and maintenance Failure to comply with regular maintenance guidelines outlined in this manual may void the warranty MUST READ WARNINGS Do not touch any hot surfaces Do not plug or unplug unit with wet hands Do not immerse unit cord or plug in liquid at any time Unplug cord from outlet when not in use and before cleaning Do not operate unattended Use only shatter resistant bulbs which meet NSF standards specifically designed for food holding units Do not use this unit for anything other than intended use Do not use outdoors Always use on a firm dry and level surface at least 12 from walls or any other obstruction Do not use if unit has a damaged cord or plug Keep children and animals away from unit Any incorrect installation alterations adjustments and or improper maintenance can lead to property loss and injury All repairs should be done by authorized professionals only Ensure that the designated power supply is adequate for continual usage and the voltage is correct INSTALLATION NOTE These warmers provide bottom heat to keep crusts crisp The illuminated shelves are thermostatically controlled to provide temperature flexibility They are also ideal for holding cookies biscuits muffins and other foods at proper serving temp2. 39 Bottom Pate toplevel 1 31 couter 1 VERO812 HlpIPKIKIN gt gt s r r Ir Ir Inwm w Ier Ir Page left blank on purpose ACE Equipment One Year Limited Warranty Admiral Craft Equipment Corp ACE warrants its equipment against defects in materials and workmanship subject to the following conditions ACE Equipment is warranted for one year effective from the date of purchase by the original owner A copy of the original receipt or other proof of purchase is required to obtain warranty coverage This warranty applies to the original owner only and is not assignable Should any product fail to function in its intended manner under normal use within the limits defined in this warranty at ACE s discretion such product will be repaired replaced with a refurbished unit or replaced with a new unit by ACE after defective unit has been inspected and defect has been confirmed ACE does not assume any liability for extended delays in replacing any item beyond its control This warranty does not apply to rubber and non metallic synthetic parts that may need to be replaced due to normal usage wear or lack of preventative maintenance This warranty covers products shipped into the 48 contiguous United States Hawaii and metropolitan areas of Alaska and Canada Warranty coverage on products used outside the 48 contiguous United States Hawaii and metropolitan areas of Alaska and Canada may vary Contact ACE for details at 1 8
3. 00 223 7750 The following conditions are not covered by warranty e Equipment failure relating to improper installation improper utility connection or supply and problems due to improper ventilation e Equipment that has not properly been maintained damage from improper cleaning and water damage to controls Equipment that has not been used in an appropriate manner or has been subject to misuse neglect abuse accident alteration negligence damage during transit delivery or installation fire flood riot or act of God e Equipment that has the model number or serial number removed or altered Equipment on which the security seal has been broken If the equipment has been changed altered modified or repaired without express written permission from ACE then the manufacturer shall not be liable for any damages to any person or to any property which may result from the use of this equipment thereafter This equipment is intended for commercial use only and this warranty is void if equipment is used in other than a commercial application For warranty and non warranty related issues please call ACE at 1 800 223 7750 ext 3 to speak to technical support When calling please have your model number serial number and proof of purchase ready To purchase replacement parts receive online technical support or fill out a warranty claim visit www admiralcraftequipment com It is not necessary to contact the place where you originally pur
4. chased your product from THE FOREGOING WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES EXPRESSED OR IMPLIED INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILTY OR FITNESS FOR PARTICULAR PURPOSES AND CONSTITUES THE ENTIRE LIABILITY OF ACE IN NO EVENT DOES THE LIMITED WARRANTY EXTEND BEYOND THE TERMS STATED HEREIN VERO112
5. ct weight consistency and personal preference Pizza should be placed on a standard aluminum pizza pan not directly on the warmer shelf This will keep product from drying out for a longer period of time and will also help keep the cabinet cleaner Use pads or oven mitts when removing aluminum pans from warmer as they get hot CLEANING NOTE To maintain cleanliness and increase service life the warmer should be cleaned daily Do not immerse 2 the unit in water or any other liquid If liquid enters the electrical compartment it may cause a short circuit or electrical shock Allow unit to completely cool before cleaning Disconnect the cord from the outlet Wipe the inside and outside surfaces of the unit with a damp cloth then wipe dry To avoid damage do not use abrasive cleaners or scouring pads 1 2 3 4 Stubborn stains on the base of unit and or shelves may be removed with a non abrasive cleaner and a damp cloth 5 6 Avoid using cleaners as the chemical residue could damage or corrode the surfaces of the unit Clean the unit with warm soapy water and soft cloth only REPLACE DISPLAY LIGHT AND SHELF BULBS Only shatter resistant light bulbs which meet or exceed NSF standards specifically designed for food holding units must be used Breakage of bulbs not specially coated could result in personal injury and or food contamination Disconnect the power supply cord and wait until unit has completely coole
6. d before replacing any bulbs TROUBLESHOOTING NOTE Unplug the from power source and allow unit to cool completely before performing any maintenance or cleaning Unit not working SUGGESTED REMEDY Check power switch position power cords and or electrical circuit Display light not working Tighten or replace bulb Shelf light not working Replace bulb Unit not heating properly Food product is drying out Has food been prepared in advance and placed in warmer at proper serving temperature Check heat settings Is it at the correct setting for your food product Are you placing food product directly on shelf or on an aluminum pan as recommended Is your food product being left in the warmer past its shelf life Shelf life is determined by personal preference and can vary greatly dependent upon the product how it is packaged etc E 1 S2 switch STI 1 Thermostat HL1 HL2 HL3 Lamp EH1 EH2 EH3 Heating element PW 16 PW 20 VER0812 Pizza Display Cases PW 16 PW 20 6 fast Boareing 1 s frentimerrate fo s Bottom Pate of middle teve 2 15 wespw fa 15 meter lt ou emm a 15 Terminal older o 19 jin m Ja 11 n thermostats 11 22 cover Piate of bottom evel 1 m pecu 1 m Handle 1 5 jw 110 3 jme 130 37 Jiampshade middetevt 2 m je BEE 2 fermer o
7. eratures 1 Remove the unit from the shipping carton and packaging 2 Ensure the light bulbs are securely in their sockets 3 Preheat the unit for 30 minutes at a setting of 4 or 5 on the thermostat dial 4 Once the preheat time has elapsed proceed to place previously prepared food product inside the warmer and u adjust the thermostat accordingly The amount of product placed in the warmer will affect the performance of the unit It is suggested that the user s periodically check the internal temperature of product and adjust the temperature settings if necessary Keep door s closed when not serving The following temperatures are APPROXIMATE and can vary due to unit location electrical supply product used etc This is intended as a guideline only SETTING THERMOMETER READING 1 85 F 2 105 F 3 140 F 4 165 F 5 ABOVE 190 F OPERATION NOTE This warmer is designed to maintain food product at or above the optimum temperature It is not designed or intended to heat up or cook food to the serving temperature Product is to be prepared to a temperature above 160 F before placing in the warmer DO NOT place product on its side as this will affect the internal holding temperatures of the product 1 2 Plug unit into appropriate electrical power supply receptacle Set thermostat to desired level Setting 4 or 5 is recommended when placing product on pizza pans Settings vary depending on produ
Download Pdf Manuals
Related Search