Actiontec SW501R Owner's Manual
Contents
1. use dehumidifier to reduce humidity 2 Connecting to network devices The RJ 45 ports on the switch support Auto MDI MDI X function which allow using straight through or cross over type cables to connect this switch to workstation or hub Connect one end of the network cable to the RJ 45 port on the rear panel and connect the other end of the network cable to the RJ 45 port on the network device Follow the same procedure to connect all the RJ 45 ports of the switch The UTP network cables must comply with EIA TIA 568 specifications and Category 5 standard for 100Mbps data transmission Maximum length using UTP cable between the switch and connected device is 100 meters 300ft Once the network cable is connected to both ends and the attached network device is powered on the green LNK ACT LED should be lit 3 Connecting the power External Power Adapter a DC Power To Connect the output end of the power t 7 adapter to the power connector on the KX rear panel of the unit Connect the SS i 1 d power adapter to the power outlet The green Power LED on the front panel should be lit Figure 2 1 Connect the AC power adapter 3 Trouble shooting 1 Power LED is not lit e Check if the power cord is properly connected to the external power adapter and the power outlet Make sure the DC power jack is firmly plugged into the power socket of the switch 2 Link Activity is not lit when connect to 100Mbps device Check2. the power switch of the network device attached to the switch make sure it is turned ON Check the network cable make sure it is properly connected to the switch and the network device S Check the network cable make sure the UTP cables comply with EIA TIA 568 and Category 5 specification Contact your dealer if problem persist Questions Call 1 888 436 0657 USA CE 73 0000558 01
3. ak Physical Description 1 Panel Power LED 100 10Mbps LED LED Panel S Port G F AON Tips Fast Ethernet Switch S Port Link Activity LED RJ45 Connectors Power Connector Power LED 10 100M LED LED Panel 8 Port 19100 hps Fast Ethernet Switch 8 Port Link Activity LED a ee en cs de enon rrr o 7 RJ45 Connectors Power Connector Power LED 100 10Mbps LED Panel 16 Port G6 Mbps Fast Ethernet Switch th catia 16 Port Link Activity LED La S K Xr YT NTSC Power Connector RJ45 Connectors Figure 1 1 Panel description 2 LED 5 3 16 Port Fast Ethernet Switch Lit Mid Green Off Lit LNK ACT Link Activity Green Flash Off L Yellow Table 1 1 LED description Description Power is supplied No power A valid link is established Data packets received No link is established Thi OOM SPEED his port run at 100Mbps 10 100M att cL This port run at 10Mbps vy Installation 1 Operating Environment This switching hub must be installed and operated within the limits of specified operating temperature 32 131 F and humidity 10 95 Noncondensing Do not place objects on top of the unit Do not obstruct any vents at the sides of the unit Do not position the unit near any heating source such as heater radiator or direct exposure to sun Prevent entering of water and moisture into the unit If necessary
Download Pdf Manuals
Related Search