59554 User Guide
Contents
1. PQOLCO 59554 DIGITAL TYRE INFLATOR USING THE TYRE INFLATOR INSTRUCTIONS 1 With power switch in 0 off position unwind power cord completely from storage compart ment and plug into 12v power socket in vehicle Wait a few seconds until display shows 0 0 Tyre pressure should always be checked after inflation with an independant gauge 2 To choose the desired pressure format PSI BAR kPa press the R button Each press of the button cycles through the three formats 3 Uncoil high pressure hose from around the inflator Connect valve connector to tyre valve Gauge will display current tyre pressure If the tyre is over inflated remove the connector hose and manually remove the excess air from the valve and recheck the pressure by either reconnecting the inflator or by using a tyre pressure please check your vehicle handbook for specific tyre pressures 4 If the tyre is under inflated adjust to the correct pressure as specified in your vehicle handbook Use the or buttons to adjust the pre set value on the gauge display Press power switch to I on position The inflator will inflate to the selected pressure and stop automatically Note towards final inflation tyre pressure display reading may be slightly higher than the selected pressure This is a normal function of the pre set feature When inflating trailer or caravan tyres that requires in excess of 50PSI it is recommended that the tyre is deflated2. manually to 40PSI or less before beginning inflation This operation allows the inflation to gradually reach the desired pressure and prevents the inflator s pump from stalling WARNING The pre set buttons should never be pressed whist the tyre inflator is running The reset button R should never be pressed during inflation If the button is pressed during inflation then the inflator should be switched off and the valve connector should be removed The unit will then require resetting by holding the R button for approx 5 seconds The display should then show 0 0 PSI BAR Kpa The inflation valve can then be reconnected and inflation can continue Check the pressure in the tyres when they are cold This means the car has been parked for at least three hours If you check the pressure when the tyres are hot you will see readings higher than the cold reading The inflator must be switched off and allowed to cool if it continuously operated for a period of more than 10 minutes EUROPEAN COMMUNITY REGISTERED DESIGN NO 000716220 Custom Accessories Europe Ltd The Granary Standen Manor Hungerford Berks R617 ORB www caeurope co uk MADE IN THE PRC CAE 2011 COE
Download Pdf Manuals
Related Search